Simon Lighting Solar light points - Cedrus Solar
3
32 SIMON LIGHTING, S.A. LIGHT POINTS AND POLES SOLAR Decorative solar light points To give an ecological image in companies or town halls where they are installed. For their decorative aesthetics: the original design of CEDRUS solar lights gives a new look to existing solar lights, making them an attractive feature. Due to the wide range of luminaires you can install, such as the HYDRA, NATH, MILOS, FOGO and DEMON models, all Istanium ® LEDs Thanks to finish customisation: CEDRUS solar light points can be painted in Simon Lighting’s colour palette or in RAL chart colours, so offering aesthetics customised to each project. WHY INSTALL SIMON CEDRUS SOLAR LIGHT POINTS? SCOPE OF APPLICATION CEDRUS solar light points are specially designed for installation in applications where they cannot be connected to mains electricity or where there is a desire to give an ecological image, but where a decorative urban feature is also required, based on the environment: • Areas outside Shopping Centres • Petrol and service stations • Gardens for headquarters and offices • Railway stations The CEDRUS SOLAR LIGHT POINT range is su- pplied with all the necessary components for pro- per installation: • Double pole, battery holder and panel bracket • Fixing bolts • Solar panel • Battery/ies • Solar regulator located in an inspection box in bracket base to make maintenance easier • Special low-loss wiring for solar applications, of specific cross-section and resistance Printed: 2013-07-05 CEDRUS SOLAR
-
Upload
mktlighting -
Category
Technology
-
view
50 -
download
0
Transcript of Simon Lighting Solar light points - Cedrus Solar
32 SIMON LIGHTING, S.A.
LIGHT POINTS AND POLES SOLAR
Decorative solar light pointsTo give an ecological image in companies or town halls where
they are installed.
For their decorative aesthetics: the original design of CEDRUS solar lights gives a new look to existing
solar lights, making them an attractive feature.
Due to the wide range of luminaires you can install, such as the HYDRA, NATH, MILOS, FOGO and
DEMON models, all Istanium® LEDs
Thanks to finish customisation: CEDRUS solar light points can be painted in Simon Lighting’s colour
palette or in RAL chart colours, so offering aesthetics customised to each project.
WHY INSTALL SIMON CEDRUS SOLAR LIGHT POINTS?
SCOPE OF APPLICATION
CEDRUS solar light points are specially designed
for installation in applications where they cannot
be connected to mains electricity or where there is
a desire to give an ecological image, but where a
decorative urban feature is also required, based on
the environment:
• Areas outside Shopping Centres
• Petrol and service stations
• Gardens for headquarters and offices
• Railway stations
The CEDRUS SOLAR LIGHT POINT range is su-
pplied with all the necessary components for pro-
per installation:
• Double pole, battery holder and panel bracket
• Fixing bolts
• Solar panel
• Battery/ies
• Solar regulator located in an inspection box in
bracket base to make maintenance easier
• Special low-loss wiring for solar applications, of
specific cross-section and resistance
Printed: 2013-07-05
CEDRUS SOLAR
33SIMON LIGHTING, S.A.
LIGHT POINTS AND POLES SOLAR
SIMON CEDRUS SOLAR
SIMON CEDRUS SOLAR LIGHT POINT WITH EXTENDED BATTERY CAPACITY FOR 12/24 VDC LUMINAIRES
SIMON CEDRUS SOLAR LIGHT POINT WITH BASIC BATTERY CAPACITY FOR 12/24 VDC LUMINAIRES
SIMON CEDRUS SOLAR EXTENDED BATTERY CAPACITY BRACKET SIMON CEDRUS SOLAR BASIC BATTERY CAPACITY BRACKET
300.00
30
0.0
0
560.00
42
0.0
0
40
00
PERNOS M24X800
Extended battery capacity CEDRUS solar light point bracket comprising: 175 Wp solar panel attached to steel plate pole, 24 VDC operating voltage and 2 x 90 Ah batteries. Double shaft for solar panel and luminaire manufactured from structural steel tube, 4 m high. Battery holder and regulator in base, hot dip galvani-sed finish and painted finish option.
300.00
300.0
0
560.00
420.0
0
4000
PERNOS M24X800
Basic battery capacity CEDRUS solar light point bracket comprising: 90 Wp solar panel attached to steel plate pole, 24 VDC operating voltage and 1 x 90 Ah battery. Double shaft for solar panel and luminaire manufactured from structural steel tube, 4 m high. Battery holder and regulator in base, hot dip galvani-sed finish and painted finish option.
H Code H Code
4 m 5-630910 4 m 5-630900
Select the most appropriate luminaire based on aesthetics
HYDRA M Istanium® LED luminaire NATH M Istanium® LED luminaire
HYDRA M luminaire with flat cover, 12/24 V, with road wide optics, 24 neutral colour temperature LEDs, 25 W consumption, low power supply current at a single luminous flux level and GYDECO* finish.
50-88667
NATH M luminaire, 12/24 VDC, with road wide optics, 24 neutral colour temperature LEDs, 25 W consumption, low power supply current at a single luminous flux level and GY9007* finish.
50-88670
* Different finishes can be requested for the two components: bracket and luminaire. See Simon Lighting colours table on page 376. Enquire for other RAL colours.
Configuration examples
CEDRUS SOLAR LIGHT POINT with extended battery capacity, 175 Wp solar panel, 24 VDC operating voltage and 2 x 90 Ah batteries, HYDRA M Ista-nium® LED 12/24 VDC luminaire with road optics, neutral colour temperature, 25 W consumption, low power supply current at a single luminous flux level and GYDECO finish.
Quantity Code Description
1 5-630910-013CEDRUS solar light point bracket, extended battery capacity, 4 m high with hot dip galvanised and GYDECO finish.
1 50-88667HYDRA M Istanium® LED luminaire, 12/24 VDC, with road optics, 24 neutral colour temperature LEDs, 25 W consumption, low power supply current at a single luminous flux level and GYDECO* finish.
CEDRUS SOLAR LIGHT POINT with extended battery capacity, 175 Wp solar panel, 24 VDC operating voltage and 2 x 90 Ah batteries, withNATH M Istanium® luminaire fixture, 12/24 VDC, with road optics, neutral colour temperature, 25 W consumption, low power supply current at a single luminous flux level and GY9007 finish.
Quantity Code Description
1 5-630910-016CEDRUS solar light point bracket, extended battery capacity, 4 m high with hot dip galvanised and GY9007 finish.
1 50-88670NATH M Istanium® luminaire, 12/24 VDC, with road optics, 24 neutral colour temperature LEDs, 25 W con-sumption, low power supply current at a single luminous flux level and GY9007 finish.
M24X800 BOLTSM24X800 BOLTS
Printed: 2013-07-05
Batería
Zona
ReguladorZona
300.00
300.0
0
560.00
420.0
0
4000
100
ø60
ø76
con tornillode seguridad
en alta presión
Panel esr¡tratificado
símil madera
810
5420
1450
PERNOS M24X800
30°
Batería
Zona
Regulador
Zona
300.00
300.0
0
560.00
420.0
0
4000
100
ø60
5200
550
ø76
1100
con tornillode seguridad
en alta presión
Panel esr¡tratificado
símil madera
PERNOS M24X800
30°
34 SIMON LIGHTING, S.A.
LIGHT POINTS AND POLES SOLAR
SIMON CEDRUS SOLAR
EXAMPLES OF SIMON CEDRUS SOLAR LIGHT POINT
BATTERY CAPACITY
Battery capacity example:
CEDRUS solar light point with extended battery capacity, 175 Wp solar panel,
24 VDC operating voltage and 2 x 90 Ah batteries, HYDRA M Istanium® 12/24
VDC luminaire with road optics, neutral colour temperature, 25 W consumption,
low power supply current at a single luminous flux level and GYDECO finish.
Location 1
Seville (Spain)
Average battery capacity: 4.6 days
Maximum battery capacity: 5.7 days
Location 2*
Lille (France)
Average battery capacity: 3.4 days
Maximum battery capacity: 4.2 days
Location 3*
Berlin (Germany)
Average battery capacity: 4.2 days
Maximum battery capacity: 5.3 days
These values are calculated based on the mean solar radiation levels recorded during
the year. Due to specific climate conditions, battery capacity levels may not reach the
indicated values. It is advisable to carry out a prior study for each location to ascertain
the solar light point’s behaviour and battery capacity. Operating 8 hours per day.
* Possibility of interrupted operation during certain periods at night in the winter season.
In this case luminaires with cabinet amplitude dimming are recommended.
CEDRUS LIGHT POINT with extended battery capacity CEDRUS LIGHT POINT with basic battery capacity
CERTIFICATES
Complete light point conforms to: EN 62124 STANDARD
Solar panel conforms to: EN 61730 STANDARD
Solar regulator conforms to: EN 61000 STANDARD
Battery conforms to: IEC 60896-21 STANDARD
Pole conforms to: EN 40-5 STANDARD
WARRANTIES
Warranty extension to five years in accordance with Simon Lighting warranty docu-
ment. See WARRANTY TERM information on the website: www.simonlighting.com
WIND RESISTANCE
Pole strength calculated and verified for the following parameters: Solar panel horizontal angle of inclination: 30° Wind speed: 28 m/s Terrain type II (according to UNE - EN40 - 3 - 1)
FOUNDATION DETAILS*
* The foundation values indicated are valid for the
following assumptions: Bracket height: 4 m Solar panel horizontal angle of inclination: 30° Wind speed: 28 m/s Terrain type II (according to UNE - EN40 - 3 - 1) Ground strength: 2 kg/cm2
HM-20 concrete
It is advisable to carry out the foundation
calculations taking the real values for the installation
area into account. 0.7 m
0.9 m
0.7 m
SOLAR PANEL CHARACTERISTICS
Monocrystalline solar panel.
Inclination of 30° from the horizontal.
Service life of 25 years with 20% power reduction. Complete with sealed
junction box and IP66 connectors.
BATTERY CHARACTERISTICS
Gel batteries.
Service life of 2500 cycles with 25% discharges.
Operating temperature (-20 °C to 50 °C).
MAINTENANCE
The CEDRUS is virtually maintenance-free thanks to the high quality
of the components used. It is advisable to perform the following actions
due to the end of the useful life of the components: Changing the battery/ies: 10 years Changing the panel: 25 years
Solar panel dimensions = 1,605 x 800 mm Solar panel dimensions = 1330 x 560 mm
High-pressure-
laminated simulated
wood panel
High-pressure-
laminated simulated
wood panel
Battery area
with locking
screw
Battery area
with locking
screw
Dimming
area
Dimming
area
M24X800 BOLTSM24X800 BOLTS
Printed: 2013-07-05
