Simoco Pulse Telemetry Solutions - DMR Association
2
Simoco Xd DMR Tier III Telemetry Products contain a 5 Watt DMR Tier III modem, one serial interface and power supply. The units recognizes standard DNP3 protocol. This unique characteristic coupled with powerful DMR features like secondary control channel and short data make the Xd DMR Tier III telemetry products a powerful all-in-one DMR Data solution, perfectly suited for applications requiring intelligent remote equipment information gathering. The range of Simoco Xd DMR Tier III Telemetry Products enables devices to be easily deployed into a wide range of industry sectors for the monitoring and control of equipment such as switches, valves, pumps and control modules. RTU USJune2017 Pulse AIR Data Modem The Simoco Pulse Air Data Modem is a DMR Tier III radio modem for wireless communications in remote SCADA telemetry systems. The unit enables third party RTUs to be wirelessly connected to the SCADA telemetry network using DMR Tier III technology and DNP3 protocol. Benefits • Seamlessly share DMR Tier III systems with voice and other data users • Industry standard interface protocol DNP3. IP Network SDMT (Simoco Digital Management Terminal) Alarm Logging Simoco Xd PULSE AIR Control/Fault Monitoring & Trend Analysis DNP3 over IP DMR Xd IP Base Station Including Gateway DMR Tier III Serial DNP3 Digital inputs & outputs, analog inputs from 3rd Party Equipment DNP3 over IP Ethernet to Serial Adaptor SCADA Master Interface server/control system Serial DNP3 Base Station Set-Up & Fault Logging NMT RTU PULSE AIR RTU Simoco Pulse Telemetry Solutions Pulse AIR
Transcript of Simoco Pulse Telemetry Solutions - DMR Association
Simoco Xd DMR Tier III Telemetry Products contain a 5 Watt DMR Tier III modem, one serial interface and power supply.
The units recognizes standard DNP3 protocol. This unique characteristic coupled with powerful DMR features like secondary control channel and short data make the Xd DMR Tier III telemetry products a powerful all-in-one DMR Data solution, perfectly suited for applications requiring intelligent remote equipment information gathering.
The range of Simoco Xd DMR Tier III Telemetry Products enables devices to be easily deployed into a wide range of industry sectors for the monitoring and control of equipment such as switches, valves, pumps and control modules.
RTU USJune2017
Pulse AIR Data ModemThe Simoco Pulse Air Data Modem is a DMR Tier III radio modem for wireless communications in remote SCADA telemetry systems. The unit enables third party RTUs to be wirelessly connected to the SCADA telemetry network using DMR Tier III technology and DNP3 protocol.
Benefits
• Seamlessly share DMR Tier III systems with voice and other data users
• Industry standard interface protocol DNP3.
IP Network
SDMT (Simoco DigitalManagement Terminal)
Alarm Logging
SimocoXd
PULSE AIR
Control/FaultMonitoring
& Trend Analysis
DNP3 over IP
DMR Xd IPBase Station
Including Gateway
DMR Tier III
Serial DNP3
Digital inputs & outputs, analog inputs from 3rd
Party Equipment
DNP3 over IP Ethernet to SerialAdaptor
SCADA Master Interfaceserver/control system
Serial DNP3
Base Station Set-Up& Fault Logging
NMT
RTU
PULSE AIR
RTU
Simoco Pulse Telemetry SolutionsPulse AIR
General SpecificationFrequency Bands VHF:136–174MHz
UHF:400–480MHzUHF:440–520MHz
Dimensions 62 mm (H) x 80 mm (W) x 162 mm (D)
Weight 550g
Power Supply 12 - 14V DC
Channel Spacing 12.5 kHz
Frequency Stability +-2 ppm
Channel Capacity 2000
Emissions Masks 7K60FXD (data) for 4FSK modulation
Enclosure Anodized aluminum with plastic ends according to DIN 43880
Mounting 35 mm DIN rail
Protocol DPN3
Input/Outputs Serial (DB9-F)
Field HouseUttoxeter Old RoadDerbyDE1 1NHTel UK: 08717 411 050Tel International: +44 (0) 1332 375 [email protected]
K H
Q
AM
ERIC
AS
AU
S H
Q
1270 Ferntree Gully RdScoresby, VIC 3179Tel: +61 (0) 3 9730 3999Fax: +61 (0) 3 9730 [email protected]
1835 E. Hallandale Beach Blvd.
Hallandale Beach
FL 33009, USA
SeeSimocoWirelessSolutionsProductCatalogueforafulllistofspecifications.Allspecificationsaresubjecttochangewithoutpriornotice.SimocoWirelessSolutionsdoesnot accept liability for any error or omission in this document.
ReceiverDigital Sensitivity -117.5 dBm (1% BER)Intermodulation 65 dB (ETS086-1)
Adjacent Channel Selectivity 60 dB @ 12.5 kHz (ETS086-1)
Spurious Rejection 70 dB (ETS086-1)
Hum and Noise 40 dB (TIA603-B)
Conducted Spurious Emission -57 dBm
TransmitterRF Power Output 5 W (programmable)
Modulation Limiting +/-2.5 kHz @ 12.5 kHz
FM Hum and Noise 40 dB (TIA-603-B)
Conducted / Radiated Emission
-36 dBm
Adjacent Channel Power -60 dBc @ 12.5 kHz
EnvironmentalStorage Temperature -40ºC – +80ºC
Operating Temperature -20ºC – +60ºC
Sustainability Waste Electrical and Eletronic Equipment (WEEE) and Restriction Hazardous Substances (RoHS) compliant
RT
U
US
June
201
7
Specifications Pulse AIR
![The DMR Basics & No Frills - BRARA DMR Basics _ No Frills.pdf · The DMR Basics & No Frills •What is DMR? •Digital vs. Analog •Time Slots [TDMA] & Talk Groups •Zones •Color](https://static.fdocuments.us/doc/165x107/5ba1da1e09d3f2666b8d3885/the-dmr-basics-no-frills-dmr-basics-no-frillspdf-the-dmr-basics-no.jpg)
