Sikafloor Flooring and Wall Systems - Sika AG · Sikafloor Morritex Broadcast System Neat/Broadcast...

Pages 1 - 2

Sikafloor Morritex Coating System Smooth Coating of 24 – 60 mils (0.7 – 1.5 mm)

Sikafloor Morritex Broadcast System Neat/Broadcast Surfacing of 40 – 120 mils (1 – 3 mm)

Sikafloor Morritex Self-Leveling Slurry Smooth System Self-Leveling Smooth Surfacing of 80 – 160 mils (2 – 4 mm)

Sikafloor Morritex Self-Leveling Slurry Broadcast System Self-Leveling/Broadcast Surfacing of 1/8 – 1/4 in (3 – 6 mm)

Sikafloor Morritex Hangar System Smooth Surfacing of 32 – 43 mils

Page 3

Sikafloor Quartzite Broadcast System

Sikafloor Quartzite Heavy Duty Broadcast HDB System

Sikafloor Quartzite Trowel System Decorative Epoxy Multicolored Quartz Trowel Finish of 1/8 – 1/4 in (3 – 6mm)

Page 4

Sikafloor DecoFlake System Decorative Flake Flooring System 1/16 – 1/8 in (1.5 – 3 mm)

Sikafloor DecoFlake UEF System

Page 5

Sikafloor EpoRok System Screed Mortar of 1/8 – 1/4 in (3 – 6 mm)

Page 5

Sikafloor Versacolor System Decorative Epoxy Mosaic Quartz Trowel Finish of 3/16 – 1/4 in (5 – 6mm)

Page 6

Sikafloor PurCem Trowel Applied System Heavy Duty Colored Polyurethane Floor Screed of 1/4 – 3/8 in (6 – 9 mm)

Sikafloor PurCem Screed Applied System High Strength Colored Polyurethane Floor Screed of 1/4 – 3/8 in (6 – 9 mm)

Sikafloor PurCem Self-Leveling Broadcast System

Sikafloor PurCem Vertical and Cove System

Sikafloor EpoRok Epoxy Mortar Flooring System

Table of Contents

Sikafloor Quartzite Decorative Quartz Flooring SystemsDecorative Epoxy Multicolored Quartz Broadcast Finish of 56 – 125 mils (1.3 – 3 mm)

Sikafloor Flooring and Wall Systems

Sikafloor Decoflake Decorative Flake Flooring Systems

High Strength Polyurethane Coving and Detailing Mortar of 1/8 – 1/4 in (3 – 6 mm)

Self-Leveling Polyurethane Concrete and Decorative Flake Finish System of3/16 – 1/4 in (4.5 – 6 mm)

Trowelled Epoxy Screed and Decorative, Multicolored Quartz Finish of 171 – 304 mils (4.3 – 7.7 mm)

Sikafloor Versacolor Flooring System

Sikafloor PurCem Polyurethane Concrete Flooring Systems

Medium Duty Self-Leveling Polyurethane Screed Broadcast and Sealed finish of 3/16 – 1/4 in (4.5 – 6 mm)

Sikafloor Morritex Solid Color Flooring Systems

Pages 7 - 8

Sikafloor Electrostatic Control Epoxy System High-Build, Smooth Finish Epoxy ESD Flooring of 24 – 26 mils

Sikafloor Conductive Electrostatic Control Epoxy System High-Build, Smooth Finish Epoxy Conductive ESD Flooring of 28 – 32 mils

Sikafloor Electrostatic Control Novolac Epoxy System High-Build, Smooth Finish Novolac Epoxy ESD Flooring of 24 – 26 mils

Sikafloor Conductive Electrostatic Control Novolac Epoxy System

Sikafloor Electrostatic Control Urethane System

Page 9

Sikafloor 1610 Moisture tolerant primer of 10 – 20 mils (0.25 – 0.5 mm)

Sikafloor 81 EpoCem

Sikafloor 75 EpoCem Moisture-insensitive Epoxy/Cement, Resurfacing and Pore-Filling Mortar

Page 10

Sikafloor Merflex Waterproofing Smooth System

Page 11

Sika ComfortFloor System

Page 12

Sika ComfortFloor Pro System

Page 13

Sikagard Hygiene Urethane Coating System

Page 14

Sikagard Descoglas RF Fiber Reinforced Epoxy Wall System

Sikagard Descoglas FE Flexible Epoxy Wall System

High-Build, Smooth Finish Novolac Epoxy Conductive ESD Flooring of 28 – 32 mils

Sika ComfortFloor SystemsSeamless Low VOC Elastromeric Flooring for interior Concrete Surfaces finishof 80-120 mils

Sika ComfortFloor Decorative System Seamless Low VOC Elastromeric Decorative Flooring for interior Concrete Surfaces finish of 80-120 mils

Sikafloor Merflex Waterproofing Systems

High performance Epoxy Wall Coating with integral glass fiber and filler fortification (25 mils to 30 mils)

Sikagard Descoglas RM Fiberglass Mat Reinforced Wall System Epoxy Wall Coating System with Fiberglass Mat (45 mils to 50 mils)

Flexible Epoxy Wall Coating (25 mils to 30 mils)

Sikagard Hygiene Wall SystemsSingle Component, Water Based Urethane Coating (5 mils to 8 mils)

Single Component, medium to high build flexible Coating (15 mils to 48 mils)Sikagard Hygiene High Build Flexible System

Mechanical Room Waterproofing with solid color broadcast wear resistant finish of 56 – 90 mils

Sika ComfortFloor Pro SystemsSeamless Low VOC Elastromeric Flooring for interior Concrete Surfacesfinish of 240-320 mils

Sika ComfortFloor Decorative Pro System Seamless Low VOC Elastromeric Decorative Flooring for interior Concrete Surfaces finish of 240-320 mils

Sikafloor Merflex Waterproofing Broadcast System

Sikagard Descoglas Wall Systems

Mechanical Room Waterproofing with solid color smooth finish of 48 – 60 mils

Sikafloor ESD Electrostatic Control Flooring Systems

Thin-Build, Urethane ESD Flooring, Smooth – slight Texture Finish Urethane ESD Flooring of 28 – 34 mils

Sikafloor Moisture Mitigation Flooring Systems

Moisture-insensitive Self-Leveling, Epoxy-Cement Floor Topping for Structural Resurfacing and damp, “green” concrete of 136 – 180 mils (1/8 – 3/16)

January 6, 2014

System Name System Description Coating Former Product Current Product

Smooth Coating of 24 – 60 mils (0.7 – 1.5 mm)

Primer Sikafloor 107 Sikafloor 161 / 264

Sikafloor 207

Top Coat Sikafloor 215 Sikafloor 264

Optional Top Coat Sikafloor 315 Sikafloor 315

Optional Top CoatSikafloor 264

Thixo Lite

Neat/Broadcast Surfacing of 40 – 120 mils (1 – 3 mm)

Primer Sikafloor 107 Sikafloor 161




Self-Leveling Smooth Surfacing of 80 – 160 mils (2 – 4 mm)

Typical Thickness

(mils)

Sikafloor Morritex Solid Color Flooring System

3 — 3.5

8 — 10

Sikafloor 203+

Sikadur 504 Slurry Aggregate

Sikafloor 264 +

Sikadur 504 Slurry Aggregate

16 — 25

Sikafloor Morritex Broadcast System is a solid color, textured, resin-rich, aggregate-filled, seamless, epoxy-based floor coating. The incorporation of durable, hard

aggregate broadcast and sealed into the surface, economically increases coating thickness, extending life

expectancy against aggressive wear. Typically installed to protect new or existing concrete floors at a thickness

range of 40 – 120 mils (1 – 3 mm). This light to medium duty, general service epoxy coating demonstrates good chemical resistance as well as high abrasion and impact resistance. Sikafloor Morritex Broadcast System can be

customized to meet aesthetic and slip resistance requirements.

Sikafloor Morritex Broadcast

System

Sikafloor Morritex Self-Leveling

Slurry SmoothSystem

Sikafloor 161

Self Leveling Slurry

16

Sikafloor 107

Body Coat 16

16

3 — 3.5

Sikafloor Morritex Coating System is a solid color, high gloss, smooth, resin rich, seamless, epoxy based floor

coating. Typically installed in light duty traffic areas, this general service epoxy coating demonstrates good

chemical and abrasion resistance. Sikafloor Morritex Coating System produces an aesthetic, smooth surface

texture that is easy to clean and maintain.

Sikafloor Morritex Self-Leveling Smooth System is a solid color, smooth, resin rich, aggregate extended, seamless, epoxy based floor coating. The incorporation of durable, fine aggregate into the matrix during mixing significantly

increases the liquid resin volume during application without sacrificing physical properties. This reduces the

overall neat resin cost associated with thicker self-leveling coatings, maximizes resin economy allowing thicker

applications that ultimately extend the coatings service life against aggressive wear. Typically installed in light to

heavy duty traffic areas, this general service epoxy coating demonstrates good chemical resistance as well as

high abrasion and impact resistance. Sikafloor Morritex Self-Leveling Smooth System produces an aesthetic,

smooth surface texture that is easy to clean and maintain. Final surface appearance options include: unlimited color selection, and integral cove base. The system thickness is

adjustable to 80 – 160 mils (2 – 4 mm) depending on condition of use.

Primer 8 — 10

80 — 160

Sikafloor Morritex Coating System

Sikafloor 203 / 207 +

Broadcast to Rejection

Sikafloor 264+


20

8 — 10

16 — 25

The coverages are THEORETICAL material requirements, and do not account for waste, substrate irregularities, wetting out of rollers, tools etc. Use only as a guide.

1 of 14

January 6, 2014


Self-Leveling/Broadcast Surfacing of 1/8 – 1/4 in (3 – 6 mm)


Top Coat Sikafloor 203 / 215 Sikafloor 264



Smooth Surfacing of 32 – 43 mils


Body Coat Sikafloor 207 Sikafloor 264

1st Top Coat Sikafloor 340 Sikafloor 340

2nd Top Coat Sikafloor 340 Sikafloor 340

Sikafloor 315 Sikafloor 315


60 — 80

16

Sikafloor Morritex Solid Color Flooring System

3 — 3.5

16

8 — 10

16 — 25

4

8 — 10

Body Coat

Typical Thickness

(mils)

4

3 — 3.5

3 — 3.5

Sikafloor Morritex Hangar System is a monolithic solid color flooring system. The system offers chemical

resistance. Specifically designed for and typically installed in airplane hangars and aviation environments. This system resists typical aviation fluids such as Skydrol.

Optional TopcoatLow VOC Coating System(Replaces Sikafloor-340)

Sikafloor Morritex Self-Leveling Broadcast System is a solid color, textured, resin rich, aggregate extended,

seamless, epoxy based floor coating. The incorporation of durable, fine aggregate into the matrix during mixing significantly increases the liquid resin volume during

application without sacrificing physical properties. This reduces the overall neat resin cost associated with thicker self-leveling coatings, maximizes resin economy allowing thicker applications that ultimately extend the coatings service life against aggressive wear. Optional selected

aggregate (selected for texture) are broadcast on to the wet resin during application to produce an aggregate

surface texture with improved wear resistance. Typically installed in light to heavy duty traffic areas, this general

service epoxy coating demonstrates good chemical resistance as well as high abrasion and impact resistance. Final surface appearance options include: unlimited color selection, integral cove base, and variable surface texture to produce a range of slip-resistant finishes. The system thickness is adjustable to 1/8 – 1/4 in (3 - 6 mm) depend

on condition of use.

Sikafloor 203 / 207+


Sikafloor 264 +

Sikadur 504+

Broadcast to RejectionSikafloor Morritex Self-Leveling Slurry

BroadcastSystem

(Formerly Morritex HD)

Sikafloor MorritexHangar System


2 of 14

January 6, 2014


Decorative Epoxy Multicolored Quartz Broadcast Finish of56 – 125 mils (1.3 – 3 mm)




Optional Top Coat Sikafloor 225N Sikafloor 225N


Trowelled Epoxy Screed and Decorative, Multicolored Quartz Finish of 171 – 304 mils (4.3 – 7.7 mm)


Trowelled Mortar Sikafloor 110 EpoRok Sikafloor 160 EpoRok

Grout Coat Sikafloor 205 Sikafloor 264 Thixo Lite




Decorative Epoxy Multicolored Quartz Trowel Finish of 1/8 – 1/4 in (3 – 6mm)


Decorative Mortar Sikafloor 215

Sikafloor 160 EpoRok+

Decorative Trowel size Aggregate

Grout Coat Sikafloor 203Sikafloor 216

+Extender T


Optional Top Coat Sikafloor 215 / 225N /

510Sikafloor 225N / 510



6 — 8

8 — 10

8 — 10

Typical Thickness

(mils)

8 — 10

16

Body Coat

Sikafloor 203+

Broadcast to RejectionDecorative Sand

Aggregate

Sikafloor 216+


Aggregate

Sikafloor Quartzite Trowel System

Sikafloor Quartzite HDB

Heavy Duty Broadcast

System

6 — 8

16

16 — 20

4Optional Top Coat

Sikafloor 264 +


Aggregate

1/8 — 1/4

Sikafloor QuartziteBroadcast System

Body Coat

Sikafloor 203+


Aggregate

3 — 3.5

3 — 3.5

16

8 — 10

Sikafloor Quartzite Decorative Quartz Flooring System

Sikafloor Quartzite Broadcast System is a seamless, aesthetic, 1/8 in (3 mm) thick, broadcast and sealed

epoxy floor, composed of multicolored quartz aggregates finished with transparent top coats. The system provides

a durable, impermeable lightly textured, slip resistant finish with superior mechanical and good chemical

resistance. Various Sikafloor epoxy, polyaspartic and urethane topcoats and variable surface textures are available to produce a range of slip-resistant finishes

depending on conditions of use.

Body Coat

Sikafloor 203+


Aggregate

16

Sikafloor 216+


Aggregate

8 — 10

1/8" — 1/4"

16

16

Sikafloor Quartzite HDB System is a decorative, 171 – 304 mils (4.3 – 7.7 mm) thick, two layer epoxy floor system. The first layer consists of a 1/8 in (3 mm) thick, trowel-

applied heavy duty epoxy screed used to re-profile rough or deteriorated concrete surfaces or to create thin-set

slope changes in certain areas in order to provide positive slopes to drains. The second layer is a broadcast and sealed epoxy floor, composed of multicolored quartz

aggregates finished with transparent top coats to produce a seamless and aesthetic finish. The system offers high

compressive strength and accepts abuse from impact and heavy loading.

4Optional Top Coat

Sikafloor Quartzite Trowel System is a seamless, aesthetic, 1/8 – 1/4 in (3 - 6 mm) thick, trowelled and sealed epoxy floor, composed of multicolored trowel

quartz aggregates finished with transparent top coats. The system provides a durable, impermeable finish with

superior mechanical and chemical resistance. Final surface appearance options include: integral cove base, and variable surface texture to produce a range of slip-

resistant finishes.

3 — 3.5


3 of 14

January 6, 2014



Sealer Coat Sikafloor 215 Sikafloor 216






Self-Leveling Polyurethane Concrete and Decorative Flake System Finish of 3/16 – 1/4 in (4.5 – 6 mm)

Top CoatSikafloor 203 / 215 /

225NSikafloor 216




Moisture TolerantBody Coat

Sikafloor 22NA PurCem+

Broadcast Quartz Sand to Rejection

Sikafloor 22NA PurCem+

Broadcast Quartz Sand to Rejection

Body Coat

16

16

Sikafloor DecoFlake Decorative Flake Flooring System

Body Coat

Sikafloor 203 Pigmented+

Broadcast to RejectionVinyl Decorative Flakes

Sikafloor 264+


Single Broadcast System

160

16

Sikafloor 203+


Sikafloor 264+


Typical Thickness

(mils)

Sikafloor 203+


Sikafloor DecoFlake is an aesthetic, easy to clean, seamless floor consisting of a clear epoxy binder,

broadcast with multi-colored vinyl chips and sealed with transparent, or UV stable topcoats. The system is highly

customizable with an extensive color palette and variable application thicknesses. Final surface options include:

integral cove base, and variable surface texture to produce a range of slip-resistant finishes.

Optional Top Coat Sikafloor 225N Sikafloor 225N 16

1st Body Coat

2nd Body Coat

Sikafloor 203 +


Optional Top Coat

16

16

16

3 — 3.5

Sikafloor DecoFlake

System


Sikafloor Decoflake UEF is a two layer floor system. The first layer consists of a self-leveling, medium to heavy duty, solid colored, three component, cementitious

polyurethane concrete broadcast to rejection with sand aggregate and sealed with a pigmented epoxy coating.

The second layer is a pigmented epoxy basecoat broadcast with multicolored vinyl flakes and sealed with

selected top coats. The system provides an aesthetic, easy to clean, smooth surface, a durable, impermeable

finish with superior mechanical and good chemical resistance. Surface texture can be customized to meet

aesthetic and slip resistance requirements. Sikafloor DecoFlake UEF can be used to significantly

accelerate the installation schedule on fast-track projects. The self-leveling polyurethane concrete base with

broadcast and solid colored seal coat can be installed as soon as the concrete can be shot-blasted and used as a

work surface throughout the heavy trade’s and build out portion of the project. Once the heavy trades are finished,

the floor is cleaned and prepared, cove base and decorative flake finish installed.

8 — 10

16

Sikafloor DecoFlake

UEF System

Sikafloor 264+


12

16

16

3 — 3.5

Double Broadcast System

8 — 10

Decorative Flake Flooring System 1/16 – 1/8 in (1.5 – 3 mm)

12

Sikafloor 216+


16


4 of 14

January 6, 2014


Screed Mortar of 1/8 – 1/4 in (3 – 6 mm)


Epoxy Mortar Sikafloor 110 EpoRok Sikafloor 160 EpoRok

Grout Coat Sikafloor 205Sikafloor 264

Thixo Lite

Top Coat Sikafloor 205Sikafloor 264

Thixo Lite


Decorative Epoxy Mosaic Quartz Trowel Finish of 3/16 – 1/4 in (5 – 6mm)


Decorative MortarSikafloor 215 Pigmented

+Mosaic Quartz Aggregate

Sikafloor 216 Pigmented+

Mosaic Quartz Aggregate

Grout Coat Sikafloor 203 Sikafloor 216


SikafloorVersacolor

System

3 — 3.5

Sikafloor EpoRok Epoxy Mortar Flooring SystemTypical

Thickness (mils)

8 — 10

1/8" — 1/4"

6 — 8

Sikafloor Versacolor is a seamless aesthetic trowelled and sealed epoxy floor composed of multicolored mosaic

quartz aggregates. The system provides a durable, seamless and wear resistant finish.

Sikafloor EpoRok Trowel System is a solid color,, resin-rich, aggregate filled, seamless, epoxy based floor

resurfacer with high density and compressive strength for exceptional durability. Typically installed to protect new concrete or re-profile existing worn floors at a thickness range of 1/8 - 1/4 in (3 - 6 mm). This heavy duty, general

service epoxy system demonstrates good chemical resistance as well as superior abrasion and impact resistance. Sikafloor EpoRok Trowel System can be customized to meet aesthetic and slip-resistance

requirements. Final surface appearance options include: unlimited color selection, slight or heavy orange peel,

integral cove base, and variable surface texture to produce a range of slip-resistant finishes. This product can

be placed using a screed and finished by hand troweling or power troweling.

SikafloorEpoRok Trowel Mortar System

6 — 8


5 of 14

January 6, 2014

System Name System Description Coating

Heavy Duty Colored Polyurethane Floor Screed of 1/4 – 3/8 in (6 – 9 mm)

Primer

Trowel Mortar

High Strength Colored Polyurethane Floor Screed of 1/4 – 3/8 in (6 – 9 mm)

Primer

Mortar Screed

Medium Duty Self-Leveling Polyurethane Screed Broadcast and Sealed finish of 3/16 – 1/4 in (4.5 – 6 mm)

Primer

Self-Leveling Mortar

Top Coat

High Strength Polyurethane Coving and Detailing Mortar of 1/8 – 1/4 in (3 – 6 mm)

Primer

Coving and Detailing Mortar

Sikafloor 19NA PurCem 1/4"

to 3/8"


to 3/8"

Sikafloor PurCem Self-Leveling

Broadcast System

Sikafloor 22NA PurCem is a self-leveling, medium to heavy duty, solid color, three-component, water

dispersed polyurethane-based/cement and aggregate screed. It is designed to provide excellent resistance to

abrasion, impact, chemical attack and other physical aggression. Sikafloor 22NA PurCem is broadcast with quartz aggregate to increase surface texture and slip resistance and typically sealed with Sikafloor 31NA

PurCem. The system is typically installed at 3/16 to 1/4 in (4.5 to 6 mm) thickness.

Substrate priming is normally not required under typical circumstances. Substrate porosity/condition

determines if primer/scratch coat is required

Sikafloor PurCem Trowel Applied

System

Sikafloor PurCem Vertical and Cove

System

Sikafloor PurCem Polyurethane Concrete Flooring System

Product NameTypical

Thickness (mils)

Sikafloor 19NA PurCem is a trowel grade, heavy duty, solid color, three-component, water dispersed

polyurethane-based / cement and aggregate screed designed to provide excellent resistance to abrasion,

impact, chemical attack and other physical aggression. Sikafloor 19NA PurCem has a textured aggregate surface providing moderate slip resistance. Typically installed at

1/4 to 3/8 in (6 to 9 mm) thickness.



Sikafloor 29NA PurCem is a vertical grade, three-component, solid color, water dispersed polyurethane-based/cement and aggregate mortar used for detailing

work and coving. It has a finely textured smooth aggregate appearance that provides excellent resistance to abrasion, impact, chemical attack and other physical

aggression. Typically installed at 1/8 to 1/4 in (3 to 6 mm) thickness.

Sikafloor 161 8 — 10


to 1/4"

Sikafloor 22NA PurCem +


3/16" to

1/4"

Sikafloor 31NA PurCem

Sikafloor PurCem Screed Applied

System

15

Sikafloor 20NA PurCem is a resin rich, easy to trowel, heavy duty, solid color, three-component, water

dispersed polyurethane-based/cement and aggregate screed. It is designed to provide excellent resistance to

abrasion, impact, chemical attack and other physical aggression. Sikafloor 20NA PurCem has a textured

aggregate surface providing moderate slip resistance. Selected aggregate can be broadcast on the wet screed to increase the surface texture. Typically installed 1/4 to 3/8

in (6 to 9 mm) thickness.




6 of 14

January 6, 2014


High-Build, Smooth Finish Epoxy ESD Flooring of 24 – 26 mils


Top Coat Sikafloor 200 ESD Sikafloor 200 ESD

High-Build, Smooth Finish Epoxy Conductive ESD Flooring of 28 – 32 mils


Conductive Black Primer

Sikafloor 100 ESD / 220W Conductive

Sikafloor 220W Conductive

Top Coat Sikafloor 200C ESD Sikafloor 200C ESD

Sikafloor ESD Conductive Epoxy Conductive Electrostatic Control System consists of Sikafloor 220W Conductive

Primer, and Sikafloor 200C ESD. The system is designed to impart electrostatic control properties to a variety of

substrates in conjunction with ESD footwear, including existing non-conductive substrates. The system provides very low body voltage values (BVG) when used with the

appropriate ESD standards. Maintains electrical conductivity throughout the entire thickness of the

system. Meets low resistance requirements for NFPA 77 and other hazardous applications - (2.5 X 104 to 1.0 X 106

ohms) per ANSI/ESD S7.1/ASTM F-150. Meets Class 0 requirements for ANSI S20.20 electronics applications.

Sikafloor 220W Conductive primer and Sikafloor 200C ESD are typically installed on a standard Sikafloor epoxy

concrete primer, Sikafloor moisture tolerant primer or Sikafloor 81 EpoCem, specifically formulated for self-leveling and structurally reprofiling damp “green” or saturated surface dry concrete slabs with excessive

moisture. When installed on existing epoxy coatings, an isolation layer of Sikafloor epoxy coating is required.

8 — 10

Sikafloor Electrostatic

Control Epoxy System

8 — 10

4 — 6

16

Sikafloor ESD Electrostatic Control Flooring System

Sikafloor Conductive

Electrostatic Control Epoxy

System

16

Typical Thickness

(mils)

Sikafloor ESD Epoxy Electrostatic Control System consists of Sikafloor 200 ESD designed to impart electrostatic

control properties to a variety of substrates in conjunction with ESD footwear, including existing non-conductive substrates. The system provides low body

voltage values (BVG) when used with the appropriate ESD standards. Maintains electrical conductivity throughout

the entire thickness of the system. Conforms to ANSI S20.20; Flooring/footwear combination resistance of < 3.5

x 107 ohms when tested in accordance with ANSI STM 97.1.

Sikafloor 200 ESD is typically installed as a stand-alone top coat on a standard Sikafloor epoxy concrete primer,

Sikafloor moisture tolerant primer or Sikafloor 81 EpoCem, specifically formulated for self-leveling and

structurally reprofiling damp “green” or saturated surface dry concrete slabs with excessive moisture. When

installed on existing epoxy coatings, an isolation layer of Sikafloor epoxy coating is required.


7 of 14

January 6, 2014


High-Build, Smooth Finish Novolac Epoxy ESD Flooring of 24 – 26 mils


Top Coat Sikafloor 700 ESD Sikafloor 700 ESD

High-Build, Smooth Finish Novolac Epoxy Conductive ESD Flooring of 28 – 32 mils


Conductive Black Primer

Sikafloor 100 ESD / 220W Conductive

Sikafloor 220W Conductive

Top Coat Sikafloor 700C ESD Sikafloor 700C ESD

Thin-Build, Urethane ESD Flooring, Smooth – slight Texture Finish Urethane ESD Flooring of 28 – 34 mils



First Top Coat Sikafloor 340 ESD Sikafloor 340 ESD

Second Top Coat Sikafloor 340 ESD Sikafloor 340 ESD

8 — 10

4 — 6

16

16

Typical Thickness

(mils)


Control Urethane System

Sikafloor Conductive

Electrostatic Control Novolac

Epoxy System

Sikafloor ESD Novolac Epoxy Electrostatic Control System consists of Sikafloor 700 ESD designed to impart

electrostatic control properties to a variety of substrates in conjunction with ESD footwear, including existing non-conductive substrates. The system provides low body

voltage values (BVG) when used with the appropriate ESD standards. Maintains electrical conductivity throughout the

entire thickness of the system. Conforms to ANSI S20.20; Flooring/footwear combination resistance of < 3.5 x 107

ohms when tested in accordance with ANSI STM 97.1. Sikafloor 700 ESD is typically installed as a stand-alone top

coat on a standard Sikafloor epoxy concrete primer, Sikafloor moisture tolerant primer or Sikafloor 81 EpoCem,

specifically formulated for self-leveling and structurally reprofiling damp “green” or saturated surface dry concrete slabs with excessive moisture. When installed on existing

epoxy coatings, an isolation layer of Sikafloor epoxy coating is required.

8 — 10


Control Novolac Epoxy System

Sikafloor ESD Novolac Epoxy Conductive Electrostatic Control System consists of Sikafloor 220W Conductive Primer, and

Sikafloor 700C ESD. The system is designed to impart electrostatic control properties to a variety of substrates in

conjunction with ESD footwear, including existing non-conductive substrates. Designed for superior chemical

resistance, the system provides very low body voltage values (BVG) when used with the appropriate ESD standards. Maintains electrical conductivity throughout the entire

thickness of the system. Meets low resistance requirements for NFPA 77 and other hazardous applications - (2.5 X 104 to 1.0 X 106 ohms) per ANSI/ESD S7.1/ASTM F-150. Meets Class

0 requirements for ANSI S20.20 electronics applications. Sikafloor 220W Conductive Primer and Sikafloor 700C ESD are

typically installed on a standard Sikafloor epoxy concrete primer, Sikafloor moisture tolerant primer or Sikafloor 81

EpoCem, specifically formulated for self-leveling and structurally reprofiling damp “green” or saturated surface dry

concrete slabs with excessive moisture. When installed on existing epoxy coatings, an isolation layer of Sikafloor epoxy

coating is required.

Sikafloor ESD Urethane Electrostatic Urethane Control System consists of Sikafloor-340 ESD designed to impart electrostatic

control properties to a variety of substrates in conjunction with ESD footwear, including existing non-conductive

substrates. Sikafloor 340 ESD provides excellent chemical and stain resistance for critical and demanding environments and includes an abrasion resistant-slight textured finish. Resists typical aviation fluids such as Skydrol. The system provides

low body voltage values (BVG) when used with the appropriate ESD standards. Maintains electrical conductivity throughout the entire thickness of the system. Conforms to

ANSI S20.20; < 3.5 x 107 ohms when tested in accordance with ANSI STM 97.1. Sikafloor 340 ESD is typically installed as a

stand-alone top coat on a standard Sikafloor epoxy concrete primer, Sikafloor moisture tolerant primer or Sikafloor 81

EpoCem, specifically formulated for self-leveling and structurally reprofiling damp “green” or saturated surface dry

concrete slabs with excessive moisture. When installed on existing epoxy coatings, an isolation layer of Sikafloor epoxy

coating is required.

8 — 10

12 — 16

4

4

Sikafloor ESD Electrostatic Control Flooring System


8 of 14

January 6, 2014


Moisture tolerant primer of 10 – 20 mils (0.25 – 0.5 mm)

PrimerIf concrete substrate

moisture is < 5%.Sikafloor 1610

(One Coat)

PrimerIf concrete substrate

moisture falls between ≥ 5% and < 6%.

Sikafloor 1610(Two Coats)

Moisture-insensitive Self-Leveling, Epoxy-Cement Floor Topping for Structural Resurfacing and damp, “green” concrete of 136 –

180 mils (1/8 – 3/16)

PrimerSikafloor EpoCem

ModuleSikafloor EpoCem

Module

Moisture Tolerant Resurfacer

Sikafloor 81 EpoCem Sikafloor 81 EpoCem

Sealer Coat Sikafloor 107 Sikafloor 161

Moisture-insensitive Epoxy/Cement, Resurfacing and Pore-Filling Mortar

Primer Sikagard 75 EpoCem

Sealer Coat

Sikafloor Moisture Mitigation Flooring System

ProductName

Typical Thickness

(mils)

Sikafloor 75 EpoCem is a three-component, solvent-free, odorless, moisture-insensitive, epoxy modified,

cementitious, structural resurfacing and porefilling mortar.

Sikagard 75 EpoCem

20 — 120

Consult Sikafloor Technical Services for a recommendation

Sikafloor 1610

Sikafloor 1610 is designed as a moisture tolerant primer for Sikafloor epoxy and urethane coatings, as well as

broadcast and troweled systems. Sikafloor 1610 should be considered where ≤ 6% mass (pbw – part by weight) is

measured on concrete substrate with Tramex® CME/CMExpert type concrete moisture meter. One coat of Sikafloor 1610 is required when the concrete substrate moisture is < 5% as measured by TRAMEX CME/CMExpert

type concrete moisture meter. Two coats of Sikafloor 1610 are required when the concrete substrate moisture

falls between ≥ 5% and < 6% as measured by TRAMEX CME/CMExpert type concrete moisture meter. Total

required thickness in this instance is 16 – 20 mils. Consult the most current Product Data Sheet.

8 — 10

8 — 10

Sikafloor 81 EpoCem

Sikafloor 81 EpoCem is a three-component, solvent-free, odorless, moisture-tolerant, epoxy- modified,

cementitious self-leveling mortar. Especially formulated for leveling and structurally re-profiling on damp, “green”

or saturated surface dry concrete slabs, and slabs with excess water vapor transmission rates for thicknesses of

120 – 160 mil (3.0 - 4.0 mm).

6 — 8

120 — 160

10 — 12


9 of 14

January 6, 2014


Mechanical Room Waterproofing with solid color smooth finish of 48 – 60 mils






Mechanical Room Waterproofing with solid color broadcast wear resistant finish of 56 – 90 mils

Optional Primer Sikafloor 107 Sikafloor 161

Base Coat Sikafloor 265 Sikafloor 265

Top CoatSikafloor 203

orSikafloor 215

Sikafloor 264


20

Sikafloor Merflex Waterproofing

Broadcast System

20

8 — 10

8 — 10

Sikafloor Merflex Waterproofing Flooring SystemTypical

Thickness (mils)

Sikafloor Merflex smooth is a monolithic, flexible, and abrasion resistant smooth flooring system that is

designed for areas requiring a combined water protection membrane and wearing surface. The system is typically used in mechanical rooms, computer rooms and other areas requiring waterproofing providing flexibility and

crack-bridging.

Sikafloor Merflex Waterproofing

Smooth System

8 — 10

Sikafloor Merflex broadcast is a monolithic, flexible, abrasion and slip resistant flooring system that is

designed for areas requiring a combined water protection membrane and higher traffic wearing surface. The

system is typically used in mechanical rooms, computer rooms and other areas requiring waterproofing. The

incorporation of broadcast aggregate provides a non-slip finish for applications such as walkways or areas of

spillage.

Wear CoatSikafloor 265

+Broadcast to Rejection

Sikafloor 265+

Broadcast to Rejection20 — 30

8 — 10

3 — 3.5

20

3 — 3.5


10 of 14

January 6, 2014


Seamless Low VOC Elastromeric Flooring for interior Concrete Surfaces finish of 80-120 mils

Primer

Body Coat

Seamless Low VOC Elastromeric Decorative Flooring for interior Concrete Surfaces finish of 80-120 mils

Primer

Color Sealer

Sikafloor 304W 8

Sikafloor 107/161/160/1610 8 — 10

Body Coat

Sika ComfortFloor Decorative is an ergonomic, sound dampening, low emission floor which is UV stable,

aesthetically pleasing, easy to care for and to maintain while contributing to project LEED certification.

ComfortFloor Decorative is an 80-120 mil, seamless, fluid applied urethane floor system comprised of a 100% solids epoxy primer, pigmented self leveling low VOC aliphatic

urethane wear course, optional decorative vinyl flake and a wear resistant, clear waterbased urethane topcoat. Sika

ComfortFloor contributes to sustainable building construction by using rapidly renewable resources as the

raw material basis. Sikafloor 304W 8

Optional 2nd Sealer Coat

Sika ComfortFloor is an ergonomic, sound dampening, low emission floor which is UV stable, aesthetically

pleasing, easy to care for and to maintain while contributing to project LEED certification. ComfortFloor is

an 80-120 mil, seamless, fluid applied urethane floor system comprised of 100% solids epoxy primer,

pigmented self leveling urethane wear course and a wear resistant, pigmented water based urethane topcoat. Sika

ComfortFloor contributes to sustainable building construction by using rapidly renewable resources as the

raw material basis.

8 — 10

80

Top CoatColor Sealer

8

Sikafloor 107/161/160/1610

Sikafloor 330

Sikafloor 305W

Sikafloor 330 80

Sikafloor 305W 8

Color Flakes Random Decorative Flakes

Top CoatClear Sealer

Sika ComfortFloor System

Product NameTypical

Thickness (mils)

Sika ComfortFloor

Decorative System

Sika ComfortFloor

System


11 of 14

January 6, 2014


Seamless Low VOC Elastromeric Flooring for interior Concrete Surfaces finish of 240-320 mils

Adhesive

Pore Sealer

Top CoatColor Sealer

Seamless Low VOC Elastromeric Decorative Flooring for interior Concrete Surfaces finish of 240-320 mils

Adhesive

Pore Sealer

Color Sealer

Body Coat 80

8

Color Flakes

Top CoatClear Sealer

8

Sika ComfortFloor Adhesive

Sika ComfortFloor Regupol 6015H Shockpad

Sika Comfort Porefiller

Optional 2nd Sealer Coat

8

Sika ComfortFloor Decorative Pro is an ergonomic, sound dampening, low emission floor which is UV stable,

aesthetically pleasing, easy to care for and to maintain while contributing to project LEED certification.

ComfortFloor Decorative Pro is a 320 mil, seamless, fluid applied urethane floor system comprised of 100% solids urethane adhesive, 5mm recycled rubber pad of more

than 80% recycled content, pigmented self leveling aliphatic urethane wear course, optional decorative vinyl

flake and a wear resistant, clear water based urethane topcoat. Sika ComfortFloor contributes to sustainable

building construction by using rapidly renewable resources as the raw material basis.

Sikafloor 304W

Sikafloor 304W

Sikafloor 330 80Body Coat

Shockpad

Sika ComfortFloor Pro

System

Sika ComfortFloor Pro is an ergonomic, sound dampening, low emission floor which is UV stable, aesthetically

pleasing, easy to care for and to maintain while contributing to project LEED certification. ComfortFloor Pro is a 320 mil, seamless, fluid applied urethane floor system comprised of 100% solids urethane adhesive, 5mm recycled rubber pad of more than 80% recycled

content, pigmented self leveling urethane wear course and a wear resistant, pigmented water based urethane topcoat. Sika ComfortFloor contributes to sustainable

building construction by using rapidly renewable resources as the raw material basis.

Sika ComfortFloor Pro System

Product NameTypical

Thickness (mils)

Sikafloor 330

Sikafloor 305W

Random Decorative Flakes

Sikafloor 305W 8

Sika ComfortFloor Adhesive

Shockpad Sika ComfortFloor Regupol 6015H Shockpad

Sika Comfort Porefiller

Sika ComfortFloor

DecorativePro System


12 of 14

January 6, 2014


Single Component, Water Based Urethane Coating (5 mils to 8 mils)

1st Coat (over primed (excludes Sika Bonding

Primer)) , coated, or previously coated

substrate

2nd Coat

Single Component, medium to high build flexible Coating (15 mils to 48 mils)

Primer

2nd Coat

Primer

2nd Coat

Sikagard Hygiene Wall SystemTypical

Thickness (mils)

Product Name

4 — 5

Sika Bonding Primer**Consult Sika Technical Service for recommendations for drywall, Concrete Masonary Unit (CMU), Poured-

in-place Concrete and other substrates.

Sikagard 203W

Sikagard 203W

Sikagard 307W Sterisept

Sikagard 307W Sterisept 4 — 5

Optional Topcoats for higher gloss

Sikagard Hygiene Urethane Coating

System

Sikagard Hygiene Urethane Coating System is a one component, water based, aliphatic urethane coating

designed for use over primed substrates, hybrid acrylic or high solids epoxy systems. It provides a color stable, chemical and sanitizer resistant finish. It adheres to

properly prepared, compatible existing coatings making it an excellent maintenance finish. It outperforms

waterbased epoxy coatings in sanitized environments. Its long pot life and rapid cure time allow application of two coats within an hour of each other. Typically applied in

two coats over primed, coated or previously coated substrate. It is LEED compliant and suitable for USDA

inspected facilities. Its built-in mold inhibition package make it an excellent choice for damp and wet

environments.

4 — 5

4 — 5



8 — 11

8 — 11

Sikagard Hygiene High Build Flexible

System

Sikagard Hygiene High build Flexible System is a single component, waterbased, high build, high performance

low sheen hybrid acrylic coating system. It has excellent flexibility for crack isolation and blunt object impact

resistance. It has very good chemical and sanitizer resistance, and excellent color stability. May be roller or spray applied allowing for best application method based

on facility needs. It is LEED compliant and suitable for USDA inspected facilities. Its built-in mold inhibition

package make it an excellent choice for damp and wet environments.

6 — 7

1st Coat

Optional Topcoats for higher gloss

Roller Applied System





6 — 7

1st Coat Sikagard 203W Steridex 20 — 45

Sikagard 203W Steridex 20 — 45

Spray Applied System


13 of 14

January 6, 2014


High performance Epoxy Wall Coating with integral glass fiber and filler fortification (25 mils to 30 mils)

Primer

1st Coat

2nd Coat

Topcoats

Topcoats

Flexible Epoxy Wall Coating (25 mils to 30 mils)

Primer

1st Coat

2nd Coat

Topcoats

Topcoats

Epoxy Wall Coating System with Fiberglass Mat (45 mils to 50 mils)

Primer

1st Coat

Fiberglass Mat

Tie Coat

Fill Coat

Topcoats

Topcoats

Other Filling Options



9 — 11

4 — 5

4 — 5



Sikagard 215

Sikagard 215



Sikagard Descoglas Wall SystemTypical

Thickness (mils)

Sikagard Descoglas RF Fiber Reinforced Epoxy

Wall System

Sikagard Descoglas RF Fiber Reinforced Epoxy Wall System is a high build, high solids epoxy for moderate to

high abuse area on new construction and renovation projects. Fiberglass fiber and filler package enhance

chemical and thermal shock resistance and permit high mil build per coat. LEED compliant and suitable for FDA

inspected facilities

6 — 7

9 — 11

Product Name

4 — 5


Hangstyle 1528 fiberglass fabric with F81 coating per AMS3824 utilizing wallpaper hanging techniques.

Sikagard 215

5.94 oz

7 — 9

Sikagard Descoglas FE

Flexible Epoxy Wall System

Flexible epoxy based system for optimal impact resistance and crack isolation. Often used as a wainscot system in the impact zone. LEED compliant and suitable for FDA

inspected facilities.



6 — 7



Sikatop 121 Plus

Sikadur Injection Gel

Sikagard Descoglas RM Fiberglass Mat

Reinforced Wall System

The industry standard for fiberglass mat reinforced systems, Sikagard Descoglas Fiberglass Mat Reinforced

System offers the maximum thermal shock resistance for an epoxy coating system when specified with 5.94 oz woven roving mat. Thirty-plus years of performance

history in the most demanding environments. Suitable for FDA inspected facilities and LEED compliant.



6 — 7

Sikagard 215 9 — 11

Sikagard 215 9 — 11


2-component, 100% solids, moisture-tolerant, high-modulus, highstrength, structural epoxy. When mixed it gives a smooth, non-abrasive, paste adhesive. Can be used as a double scratch/fill coat over raw and previously coated block to fill tooled joints and voids. Can also be used to creat

radius corners and tapered transition between top of cove base and wall system

Is a two component, polymer-modified, fill mortar 121 Plus can be used over poured in place concrete and cmu as a bug hole and pore filler prior to high performance coating application


14 of 14

ISO 9001Certificate # FM 69711

RC 14001Certificate # RC 510999

Sikafloor Flooring and Wall Systems - Sika AG · Sikafloor Morritex Broadcast System Neat/Broadcast...

Documents

Transcript of Sikafloor Flooring and Wall Systems - Sika AG · Sikafloor Morritex Broadcast System Neat/Broadcast...