Sika Bitumen 60

2
Page 1 of 2 Product Data Sheet 11.02 Sika Sika Sika Sika ® Bitumen 60 Bitumen 60 Bitumen 60 Bitumen 60 Bitumen Emulsion Protective Coating Description A ready-to-use, one component, high viscosity and thixotropic bitumi- nous emulsion for the protection of steel and concrete surfaces. Uses Sika Bitumen 60 is used for waterproofing concrete surfaces, roofs, bathrooms, floors, external walls etc. It is also used for protection of structural steel works, pipes etc. Advantages Sika Bitumen 60 is an easy to use and economical material. Other benefits are: - Can be applied on dry and damp concrete substrates - Odourless - Protection against chlorides and sulphates containing water Technical Data Colour Dark brown liquid, black after drying Density (25°C) Approx. 1.0 kg/l Solid Content Approx. 60% by weight Curing Time (25°C) Touch dry after approx. 2 hours Overpainting after approx. 8 hours Fully cured after 3 days Standard Complies with ASTM D1227 -87 Consumption Total approx. 0.8 -1.0 Kg/m 2 applied in 0.6mm thickness Storage Store in cool and dry place , away from direct heat Shelf life 18 months minimum if stored properly in original unopened packaging and protect from frost. Packaging 200 kg drums Application Surface prepara- tion All surfaces must be clean, free from oil, grease. Application By brush or trowel. Stir thoroughly before use. Cleaning Clean all tools and equipment immediately after use with soap and water. Use Sika Colma Cleaner to dissolve dried Sika Bitumen 60. Important - Not suitable for contact with potable water - use Igol A - Not resistant to oil and fuel spillage - Preferrably apply in shade in extreme temperature conditions

description

A

Transcript of Sika Bitumen 60

  • Page 1 of 2Product Data Sheet 11.02

    SikaSikaSikaSika Bitumen 60 Bitumen 60 Bitumen 60 Bitumen 60Bitumen Emulsion Protective Coating

    Description A ready-to-use, one component, high viscosity and thixotropic bitumi-nous emulsion for the protection of steel and concrete surfaces.

    Uses Sika Bitumen 60 is used for waterproofing concrete surfaces, roofs, bathrooms, floors, external walls etc. It is also used for protection of structural steel works, pipes etc.

    Advantages Sika Bitumen 60 is an easy to use and economical material. Other benefits are:- Can be applied on dry and damp concrete substrates- Odourless- Protection against chlorides and sulphates containing water

    Technical DataColour Dark brown liquid, black after drying

    Density (25C) Approx. 1.0 kg/l

    Solid Content Approx. 60% by weight

    Curing Time(25C)

    Touch dry after approx. 2 hoursOverpainting after approx. 8 hoursFully cured after 3 days

    Standard Complies with ASTM D1227 -87

    Consumption Total approx. 0.8 -1.0 Kg/m2 applied in 0.6mm thickness

    Storage Store in cool and dry place , away from direct heat

    Shelf life 18 months minimum if stored properly in original unopened packaging and protect from frost.

    Packaging 200 kg drums

    ApplicationSurface prepara-tion

    All surfaces must be clean, free from oil, grease.

    Application By brush or trowel. Stir thoroughly before use.

    Cleaning Clean all tools and equipment immediately after use with soap and water.Use Sika Colma Cleaner to dissolve dried Sika Bitumen 60.

    Important - Not suitable for contact with potable water - use Igol A- Not resistant to oil and fuel spillage- Preferrably apply in shade in extreme temperature conditions

  • Sika Bitumen 60 Page 2 of 2

    In case of doubt, always follow the directions given on the pack or label.The information, and, in particular, the recommendations relating to the application and end-use of Sika prod-ucts, are given in good faith based on Sikas current knowledge and experience of the products when properly stored, handled and applied under normal conditions. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular pur-pose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this informa-tion, or from any written recommendations, or from any other advice offered. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request

    Sika Gulf B.S.C.Bldg. 925, Road 115, Sitra Area 601P.O. Box 15776Adliya, BahrainTel. +973 735 560 / Fax. +973 732 476

    SafetyPrecautions Wear gloves and goggles.

    Ecology In liquid state can contaminate water.Do not dispose of into water or soil but according to local regulations.

    Toxicity Non-toxic under the relevant Swiss health and safety codes.

    Transportation Non-hazardous.http://www.sikagulf.com

    Sika Bitumen 60Technical DataApplicationSafety