Signlink Catalogue

www.signlink.com.au

SIGNLINK PRODUCT RANGE OVERVIEW The SignLink Architectural Sign System is manufactured by Sign Supply Corp (W’Sale) Pty Ltd, a 100% Australian owned and operated company that has been established for more than 20 years. The system has been developed to enable designers to signpost large, complex sites in a way, which maintains the architectural theme (all signs have a similar look from a front elevation perspective). The product range includes sign types for both internal and external application ranging from small door signs and directional signs through to large freestanding directories. The SignLink system has been designed with a lot of inbuilt flexibility and functionality. Most sign systems are built around a range of standard size extrusions for the sign panels. The SignLink system has no such restrictions-it can be made to any nominated size. This is a significant advantage for the end user because it enables the designer to provide a sign, which meets the exact size and configuration requirements of the client; it also means that individual signs can be supplied with multiple options within the same sign. Individual signs can also be fitted with combinations of different sign face materials helping to achieve the end look. Photo anodised faceplates together with digital printed faceplates have been widely used. Photo anodised plates have a metallic lustre which makes them very attractive and gives a real wow factor. The system relies largely on magnetic componentry, which allows for simple, functional, cost effective signs without having over complicated designs. The system generally has less component parts to get broken or lost when compared to most other systems in the marketplace. The system has been used extensively in major projects throughout Australia; it is currently being used by the New South Wales Government for the upgrade of all their commercial buildings. The system has proved to be very secure. When all components are in place, unauthorised persons cannot readily remove them without the use of a glazing suction cap, which is provided. Security is a major consideration for universities. Universities are a good testing ground for any sign system. To date the following Universities have used SignLink: Sydney University NSW University Wollongong University Charles Sturt University University of QLD University of Adelaide The SignLink family of signs is comprised of: Post and Panel Signs Projecting Signs Directories Door Signs Directional Wall Signs Notice Boards Pictograms Poster Displays Ceiling Suspended Signs Plaques Photo anodised plates

Within these major product groups there is a range of models. For example the directory range is comprised of seven models to enable the designer to meet the challenges from supplying small information signs through to large directories in both wall mounted and ceiling suspended positions. A design feature of the system is that it has a slim line design. The signs have a frame that creates a minimal, unobtrusive appearance resulting in a finished design with clean uncomplicated lines. Most sign frames have a width of 1mm.

www.signlink.com.au

INDEXA. DIRECTORY SYSTEMS DB500 SERIESDirectory Overview A1Directory Comparison A2Avant Garde Directory (DB510) A3Displaymax Directory (DB520) A4Grandeur Directory (DB530) A5Grandeur Directory A6Double Sided Grandeur Directory (DB540) A7Panache Directory (DB550) A8Portfolio Directory (DB570) A9Panorama Directory (DB560) A10

B. POST & PANEL SIGNS 1000 SERIESPost & Panel Signs B1Econopanels B2Hallmark Panels B3

C. CEILING SUSPENDED SIGNS & PROJECTING SIGNSCeiling Suspended Signs CS300 C1Projecting CS300P Signs C2Ceiling Suspended Hallmark Signs CS400H Series C3Projecting Hallmark Sign CS400HP C4

D. DERNIER DOOR PLATES DP100 SeriesDernier Door Plates (DP100S) D1Door Plates (DP100M) & Door Plates with Slider (DP100SP & DP100-SSEC) D2Paper Insert Plate (DP100PI) & Door Plate to suit Engraving Laminate (DP100-EL) D3Combination Door Plate with Slider (DP100CSP) & Combination Paper Insert Door Plate (DP100CPI) D4

E. PERMA PRINT PLAQUESPerma Print Plaques E1

F. POSTER DISPLAYSComparison Chart F1Comparison Chart F2Avant Garde (PD910) F3Alpha (PD901) & Displaymax (PD920) F4Infopanel Poster Display (PD925) F5Grandeur (PD930) & (PDP40) F6Panorama (PD960) & Panache (PD950) F7Portfolio (PD970) F8Portfolio Free Standing & Wall Mounted Notice Cabinet F9

G. WALL PANELS Alpha Wall Panels (WP201) G1Outlook Wall Panels G2Avant Garde Wall Panels (WP210) G3Displaymax Wall Panel (WP220) & Infopanel Wall Panel (WP225) G4Grandeur Wall Panels (WP223) & Panache Wall Panels (WP250) G5Panorama (WP260)& Portfolio Wall Panels (WP270 G6

H. SIGNLINK SPLIT BATTENSplit Batten H1Split Batten H2

I. SIGNLINK PRODUCT SPECIFICATION

DIRECTORY SYSTEMS DB500 SERIESB5DBTCCTCTECDIRERE EEEE EEEE ERITCTCCTC EEEE

Copyright c 2006 Sign Supply Corp (w/sale) Pty Ltd SignLink products are protected by patents. A1

25mm

Directorypanel

AcrylicCover

Door

Frame

SIDE VIEW

PAN

OR

AM

A

25mm

5mm wide

Directorypanel

SIDE VIEWP

OR

TF

OL

IO

14mm

Directorypanel

SIDE VIEW

PAN

AC

HE

25mm

Directorypanel

Directorypanel

SIDE VIEW

D.S

. GR

AN

DE

UR

C E I L I N GSIDE VIEW

GR

AN

DE

UR

17mm

12mm

Directorypanel

SIDE VIEW

DIS

PL

AY

MA

X

6.5mm

Directorypanel

SIDE VIEW

AV

AN

T G

AR

DE

The SignLink range of directory systems is comprised of seven models.

All models use the same directory panels, all can be fitted with similar options and all are used for similar purposes.

Visual Effects

The reason for having varying models is to be able to offer a number of different visual effects as well as having directories particularly well suited for either small, medium or large sizes.

The Seven models

1. AVANT GARDE - This model is a super slim sign, only 6.5mm thick. It has a square edge and is best suited for small directories in high pedestrian traffic locations.

2. DISPLAYMAX - This is very similar in appearance to the Avant Garde, however it is 12mm thick. It has a significantly stronger frame which is connected together with corner stakes. This sign is suitable for medium sized directories.

3. GRANDEUR - This model also has a square edge, but is 17mm thick. It has an extremely robust frame which is connected by double corner stakes in each corner. The frame also incorporates an internal box section for added strength. This model is ideally suited for large directories.

The Avant Garde, Displaymax and Grandeur models are all suitable to to be mounted in recesses because they have a square edge and can be made to nominated custom sizes.

4. DOUBLE-SIDED GRANDEUR - As the name implies, this sign is double sided, hence it can be suspended or mounted between two posts. Visually it looks the same as the Grandeur model from a front elevation position.

5. PANACHE - This model has a petite 7mm wide radius edge creating a slightly different visual effect which is very appealing.

6. PORTFOLIO - This model has a pronounced outer frame which is a feature of the sign. It incorporates a 5mm wide recessed stripe which can be either paint filled or laminated with vinyl to achieve a striking decorative effect. This model is particularly well suited to be painted. The frame is also extremely robust with double corner stakes in each corner. It can also be fitted with aremovable door (similar to the Panorama model) if required.

7. PANORAMA - This model has an optimal removable door which fits neatly inside the Panorama frame. The door offers increased level of security for the panels. The shape of the frame is similar to the Panache except that it is 25mm deep. This model isextremely strong and has been used to make very large signs. See page A9 for illustration of sign which incorporates large digitalprint, interchangeable directory and colour backed glassdecorative panel (the sign covered the whole foyer wall).

THE SYSTEM

DIRECTORY OVERVIEW

1 2

3 4

5 6

7

A1


DIRECTORY COMPARISON

THE SYSTEM

Low ProfileThicknessHas square edgeHas radius edgeHas shark-nose edge with pin stripeSuitable for use in recesses or cabinetsMechanical fixingFrame StrengthSuitable for small directoriesSuitable for medium-sized directoriesSuitable for large directoriesSensitivity to handling prior to installationDouble SidedCan be suspendedPanel SecurityDirectory can be fitted with acrylic coverCan accommodate slumped acrylic decorator panelPanels can have Braille mountedCan have Perma Print Photo Anodised Panel

10/106mmYesNoNoYesNo

4/10YesYesNo

3/10NoNo

9/10NoNoYesYes

9/1012mm

YesNoNoYesYes7/10YesYesNo

6/10NoNo

9/10NoNoYesYes

8/1014mm

NoYesNoNoYes8/10YesYesYes7/10NoNo

9/10NoNoYesYes

7/1017mm

YesNoNoYesYes

10/10NoYesYes9/10NoNo

9/10YesYesYesYes

4/1025mm

YesNoNoNoYes

10/10YesYesYes9/10YesYes9/10NoYesYesYes

4/1025mm

NoYesNoNoYes

10/10NoYesYes

10/10NoNo

10/10YesYes

-Yes

4/1025mm

NoYesYesNoYes

10/10NoYesYes

10/10NoNo

10/10YesYesYesYes

Directory Board Features

Ava

nt G

ard

e

Dis

pla

ymax

Pan

ache

Gra

ndeu

r

Dou

ble

-Sid

edG

rand

eur

Pan

oram

a

Por

tfol

io

A2


The Avant Garde directory is a low profile, slim line sign with a minimalistic appearance very well suited for use in modern buildings. From a front elevation perspective the outer frame is not very noticeable as it is less than 1mm thick. The design intent is to have a directory sign which features the panels rather than the outer frame.The overall thickness of the sign is only 6mm.

This model directory is suitable for small to medium size directories such as floor level directories in office buildings. The maximum recommended size is 1200 x 900mm. This sign is ideal for use in high pedestrian traffic areas.

FEATURES

• Slimline design• Economical• Square edge• Excellent panel security• Can be used in recesses - panels front loading• Standard finish is satin natural anodised silver• Extruded panels have sand blasted finish to

achieve maximum colour consistency in panels

OPTIONS

• In/Out sliders• Poster displays can be incorporated in sign• Paper insert plates• Panels can have Braille mounted• Custom painting available• Can have individual map panels

or arrow panels.• Can accept engraving laminate inserts

for 35mm high & 50mm high panels• SignLink “Perma Print’ graphics

available (photo anodised printing)

AVANT GARDE DIRECTORY

SIGNLINK DB510

A3

The directory panels mount inside the outer frame - they can either be the standard extruded panel type or custom cut panels which are custom made to meet most size requirements. Standard panel heights are 100mm, 84mm, 63mm, 50mm, 42mm, 35mm, 30mm, 25mm & 21mm. Fixing is by double sided tape and glue. Signs can be mechanically fixed if a reinforcing plate is mounted in the back of the sign. Reinforcing plates can also be used to extend the bearing area when signs are mounted directly onto glass walls.


The Displaymax has been developed to meet the need to have a directory system which has simple clear lines, is economical and fulfills the aesthetic requirements of designers and specifiers. ThisThismodel is the next step up the range from the Avant Garde model. The outer frame is a minimal thickness at 1mm thick. It is suitable to make signs up to 1500 x 1500mm. The frame has been designed to allow for bracing at the rear, which would be needed when making the larger sizes. The frame is connected with corner stakes. The overall thickness of the sign is 12mm.

FEATURES

• Slimline frame• Square edge• Strong frame which has corner stakes• Suitable for mechanical fixing• Can be used in recesses - front loading panels• Excellent panel security• Extruded panels have sand blasted finish to


OPTIONS

• In/out sliders• Poster displays can be incorporated in sign• Paper insert plates• Panels can have Braille mounted• Custom painting available• Can have individual map panels or arrow panels• Can accept engraving laminate inserts

for 35mm H & 50mm h panels• SignLink “Perma Print” graphics

available (photo anodised process)• Can be set up with header panels digitally

printed on the back of clear acrylic

DISPLAYMAX DIRECTORY

SIGNLINK DB520

A4

The directory panels mount inside the outer frame. They are front loading - they can be the standard extruded panel type or custom cut panels which are custom made to meet most size requirements. Standard panel heights are 100mm, 84mm, 63mm, 50mm, 42mm, 35mm, 30mm, 25mm & 21mm. Fixing of the sign is mechanical, double sided tape or glue. The sign is supplied complete with pre drilled fixing holes.


The Grandeur model is similar to the Displaymax and Avant Garde models in that the outer frame has a slimline square edge. The Grandeur is the ‘big brother”of the three models which have square edges. It has a very robust frame with internal reinforcing blades which connect together with double corner stakes in each corner. This model is suitable to make large sizes up to 1200 x 3000mm. The sign accepts a SignLink aluminium split batten for mounting on the wall. The split batten locates neatly in a recess at the back of the sign. This model can be set up with special decorative enhancements such as decorator panels from slumped acrylic painted in metallic colour to suit.

GRANDEUR DIRECTORY

SIGNLINK DB530

A5


FEATURES• Square edge• Extremely strong frame• Excellent panel security• Can be used in recesses - panels front loading• Fixing utilizes split batten (can result in 1 man

installations instead of 2 men for large signs)• Standard finish is satin natural anodised silver• Extruded panels have sand blasted finish to


OPTIONS• In/out sliders• Poster displays can be incorporated in sign• Paper insert plates• Panels can have Braille mounted• Custom painting available.• Can be set up with protective clear acrylic

cover which mounts inside frame• Can have individual map panels

and arrow plates• Can accept engraving laminate inserts

for 35mm H & 50mm H panels• Can have slumped acrylic decorator panels• Signlink ‘Perma Print’ graphics available

(photo anodised process)• Can be set up with header panels digitally


GRANDEUR DIRECTORY

The Grandeur model is suitable to be used as a plinth sign if mounted on a freestanding sub-frame, which is mechanically fixed into a concrete base. These signs are usually located in the foyer area of modern office buildings. They can be set up with a range of panel types including decorative materials, permanently fixed in place or interchangeable.

The Grandeur is also an appropriate option when upgrading an existing directory structure. For example the ‘Exchange House photo illustrates a Grandeur directory which replaced an existing dilapidated sign. The existing stainless steel posts were retained.

Directory panels mount inside the outer frame - they can either be the standard extruded panel type or custom cut panels which are custom made to meet most size requirements. Standard panel heights are 100mm, 84mm, 63mm, 50mm, 42mm, 35mm, 30mm, 25mm & 21mm. Panels can be supplied complete with the Signlink “Perma Print’ graphics. This is a permanent printing process whereby the ink is deposited below the surface of the panels. The print is impervious to graffiti and the lettering cannot be scratched off which makes it ideal for situations such as hospitals where it could be located in sterile environments and be subject to cleaning with aggressive cleansing agents.


This model is very similar to the Grandeur directory model except that it is double sided. It has been designed to be suspended from a ceiling or alternatively it can be set up as a freestanding directory between two posts. The overall depth of the frame is 25mm with the edge being 1.2mm thick. It appears as a thin obelisk panel either suspended or floor mounted. This model is often used in medical suites mounted behind glass shopfronts. The system is very flexible. It can have a typical diectory on one side with poster displays on the rear side or directories both sides. The method of suspending the sign can be either stainless steel wire or rigid rod.

FEATURES

• Square edge• Double sided• Strong frame which has double corner stakes• Can be suspended or mounted

in freestanding position• Excellent panel security• Extruded panels have sand blasted finish to


OPTIONS

• In/out sliders• Poster displays can be incorporated in sign• Paper insert plates• Panels can have Braille mounted• Custom painting available• Can have individual arrow and map panels• Can accept engraving laminate inserts

for 35mm H & 50mm H panels• Signlink “Perma Print” graphic available

(photo anodised process)• Can be set up with header panels digitally

printed onthe back of clear acrylic

DOUBLE SIDED GRANDEUR DIRECTORY

SIGNLINK DB540

A6

The directory panels mount inside the outer frame - they can either be the standard extruded panel type or custom cut panels which are custom made to meet most size requirements. Standard panel heights are 100mm, 84mm, 63mm, 50mm, 42mm, 35mm, 30mm, 25mm & 21mm.


The Panache directory has a distinctive slimline, radius edge frame which makes the sign appear very sophisticated and stylish. The radius edge has the effect of softening the appearance of the sign. This model is often selected for use in up market situations. It is well suited to be used in high pedestrian traffic areas because of the radius edge. The sign is available in satin natural anodised finish as well as bright gold and bright silver.

The directory panels mount inside the outer frame in the same fashion as all other directory models in the range. The panels can be either the standard extruded panel type or custom cut panels which are custom made to suit most size requirements. Standard panel heights are 100mm, 84mm, 63mm, 50mm, 42mm, 35mm, 30mm, 25mm & 21mm. Mounting is by way of mechanical fixings.The sign is supplied with pre drilled fixing holes.

The Panache model is the only directory offered with bright gold or bright silver finishes. In such situations the sign is generally supplied with matching custom cut panels complete with SignLink “Perma Print’ graphics. This is a permanent printing process whereby the ink is deposited below the surface of the panels. The print is impervious to graffiti and the lettering cannot be scratched off which makes it ideal for use in situations such as hospitals where the sign could be located in sterile environments and be subject to cleaning with aggressive cleansing agents.

FEATURES• Radius edge• Strong frame which has corner stakes• Excellent panel security• Standard finish is either SNA finish or bright silver or gold• Extruded panels have sand blasted finish to achieve maximum colour consistency in panels

OPTIONS• In/out sliders• Poster displays can be incorporated in sign• Paper insert plates• Panels can have Braille mounted• Custom painting available • Can have individual arrow and map panels• Can accept engraving laminate inserts for 35mm H & 50mm H panels• SignLink “Perma Print” graphics available (photo anodised process) • Can be set up with haeader panels digitally printed on the back of clear acrylic

PANACHE DIRECTORY

SIGNLINK DB550

A7


The Portfolio directory is the top of the range.It is a very handsome unit which boasts a striking “shark nose’ frame. The frame is a feature of the sign. It incorporates a 5mm wide recessed line which can be paint filled or have vinyl applied to achieve a striking pin stripe around the perimeter of the sign. The frame is extremely strong and is ideally suited for large directories in major building foyers or large external building directories.

The directory panels mount inside the frame - they can either be the standard extruded panel type or custom cut panels which are made to meet most size requirements. Standard panel heights are 100mm , 84mm, 63mm, 50mm, 42mm,42mm, 35mm, 30mm, 25mm & 21mm. “PermaPrint” graphics are available.This is a permanent printing process whereby the ink is deposited below the surface of the panels. The print is impervious to graffiti and the lettering cannot be scratched off which makes it ideal for use in external locations.

FEATURES

• Shark nose frame - very handsome sign• Recessed pin stripe around perimeter• Extremely strong frame suitable

for very large sizes• Standard finish is satin natural anodised• Excellent panel security• Fixing utilizes split batten• Extruded panels have sand blasted finish to

achieve maximum colour consistency

OPTIONS

• Poster displays can be incorporated in sign• Panels can have Braille fitted• Custom painting available• Can have individual arrow

plates and map panels• Can accept engraving laminate inserts

for 35mm H & 50mm H panels• SignLink “Perma Print” graphics

available (photo anodised process)• Can be set up with header panels digitally


PORTFOLIO DIRECTORY

SIGNLINK DB570

A8

• Raised black acrylic divider strips

• Can be fitted with removable door

Fixing is by way of the Signlink aluminium split batten which mounts into a recess at the back of the sign.


FEATURES

• Radius edge frame• Removable door over panels• Very strong cabinet• Offers maximum vandal

protection & panel security• Very suitable for external use• Fixing utilizes split batten

OPTIONS

• Custom painting available• Can have individual arrow and map plates• Signlink “Perma Print graphics

available (photo anodised process)• Choice of cover materials -

acrylic, polycarbonate or glass

PANORAMA DIRECTORY

SIGNLINK DB560

A9

The Panorama directory is a top end model which can incorporate a removable door (door is optional). It is well suited for large directories which need the extra protection of a cover over the panels to prevent unauthorised interference with the sign. It is ideally suited for use by State and Federal transport departments where they require secure functional cabinets. The Panorama sign has a unique double frame system. The cover is removed by means of a powerful glazing suction cap. The cover has an aluminium frame which mounts inside the outer frame of the sign. The cover can be either acrylic or polycarbonate. The Panorama frame has a radius edge. The sign is available in satin natural anodised aluminium finish or custom painting is available. The directory panels are generally custom cut to suit. Fixing is by way of the SignLink aluminium split batten which mounts into a recess at the back of the sign.

The Panorama model is particularly well suited to be used for very large directories which incorporate multiple segments. For example the illustration shows a sign which takes up the whole wall and includes a digitally printed logo/map panel, interchangeable directory (without cover) and coloured glass decorator panel.

POST AND PANEL SIGNS 1000 SERIES

Copyright c 2006 Sign Supply Corp (w/sale) Pty Ltd SignLink products are protected by patents. B1

The Signlink 1000 series has been designed to fulfill most primary identification needs as well as meet secondary directional signposting requirements for significant sites such as corporate industrial estates, universities, hospitals and similar institutions.The product group offers the sign company a wide range of options including five different types of sign poles and several different types of panels including panels which incorporate interchangeable text or poster plates. A unique feature of the system is that interchangeable panels are front loading. This is a major practical benefit of the SignLink post and panel product range. All sign poles are extruded aluminium with aluminium caps and trims to suit.

No use has been made of plastic componentry.All panels mount securely into internal tracks in the posts which are located on the inner side of the poles.

ccepta ot dengised neeb evah stsop eht fo emoSinternal galvanised steel box sections which significantly increases the strength of the poles when needed.

The sign system is available to the sign trade in a knock down kit form, with or without sign faces as well as a fully assembled form.

When assembled all fixings are fully concealed from sight. Sign assembly instructions and wind loading specifications are available on request.

POST AND PANEL SIGNS 1000 SERIES POST AND PANEL SIGNS

75mm SquareLightwieght Pole 80mm Dia x 3mm

heavy wieght Round Post

104mm SquareHeavy Duty Post 80mm Dia x 1.6mm

lightweight Round Post

FLAG MOUNTED PANEL

LOW LEVEL DIRECTIONAL SIGNMAJOR ID SIGN

B1

75mm SquareMidweight Pole


ECONOPANELS

POST AND PANEL SIGNSThese panels have been designed as the name implies, to deliver excellent economy without compromising the functional or aesthetic value of the sign.

They are quite simple to put together as there are only two elements to assemble onto the face panel.

The sign face material is 6mm thick, double sided Dibond, which is a composite panel with painted aluminium faces on both sides. Dibond is an extremely strong, rigid sign material which is made in Germany specifically for the sign industry.Powdercoated white cover trims are mounted over the top and bottom cut edges of the panel.The Dibond is fixed into a mounting track on both the left hand and right hand sides, which in turn mounts inside the sign pole. Panels which are wider than 1550mm have a secondary 16 x 16mm reinforcing trim top and bottom of panel.

The Econopanel achieves its cost savings by greatly reducing the labour cost to make the panel.

Econopanels are also very suitable to be used for flag mounted signs on one post. They are supplied to the market in a knock down kit form with or without face panels.

ECONOPANELMOUNTING IN POST

PLAN VIEW OF ECONOPANEL

B2


HALLMARK PANELS

POST AND PANEL SIGNSThese panels are 25mm thick and are a fully fabricated, high quality panels.

They are constructed from a proprietary multi function frame section which accepts a variety of face plates up to 5mm thick.

The front loading feature makes Hallmark panels ideally suited to be used in situations where regular changes need to be made. Hallmark panels are supplied to the sign trade in component form or fully assembled. In order to assemble panels companies need to have the ability to mitre cut aluminium accurately.

Assembly instructions are available on request..

100 X 16MM BOX SECTION PLANKS

These are available in powdercoated white. They are an economical alternative for single plank signs. The panels mount in the poles using the same mounting track as Hallmark panels

104MM SQUARE HEAVY DUTY POST WITH “DURAGAL” STEEL INSERT POST & HALLMARK PANEL

PLAN VIEW OF HALLMARK PANELS

HALLMARK PANELS MOUNTING IN POST

B3

Face plates mount on both sides of the panel. Composite aluminium face plates at 3mm thick are the most commonly used type and can be made in sizes up to 2450 x 1250. Face plates can also be made from thinner material such as 1.2 satin natural anodised aluminium sheet. Thinner face plate materials require an inner H grade polystyrene core which gives the necessary support to the face plates and makes them resistant to dents. Face plates can be set up so that they are either interchangeable or, alternatively, combinations permanently mounted.

Interchangeable panels attach firmly in place with all panels abutting closely to form hairline joints. Interchangeable panels are front loading and can only be removed with the supplied glazing suction cap.

Copyright c 2006 Sign Supply Corp (w/sale) Pty Ltd SignLink products are protected by patents.

CEILING SUSPENDED SIGNS &PROJECTING SIGNS

Copyright c 2006 Sign Supply Corp (w/sale) Pty Ltd SignLink products are protected by patents. C1

CEILING SUSPENDED SIGNS CS300

SignLink 300 series ceiling suspended signs are comprised of outer aluminium frames which screw together to form single or multiple panels. There are two alternative ways of setting the signs up as follows:

SLIDING FACE PLATES

Face plates from sheet material such as 1.2mm thick satin natural anodised aluminium or painted white aluminium, slide into the frames front and back.The face plates are located in an internal groove within the frame. They are removed by unscrewing the end piece and sliding out the plate. Where there are multiple planks in a bank, the horizontal frames which abut together interlock by means of a grooved and T section within the frame. Signs are supplied with stainless steel support wires with locking cylinders which allow for level adjusting of the signs.

FRONT LOADING FACE PLATE

This type of sign has a single outer frame. Face plates mount onto a backplate magnetically. This allows maximum flexibility including vertical panels. Changing panels does not involve any disassembly of the sign.

These signs are widely used in hospitals and medical facilities.

Signs are supplied either in a knock down kit form or fully assembled. The standard finish is satin natural anodized.

STANDARD SIZES - CEILING SUSPENDED

800 x 100mm, 800 x 150mm, 800 x 200mm, 800 x 300mm

1000 x 100mm, 1000 x 150mm, 1000 x 200mm, 1000 x 300mm

1200 x 100mm, 1200 x 150mm, 1200 x 200mm, 1200 x 300mm

All above sizes are available with multiple planks

CEILING SUSPENDED SIGNS

Ceiling Suspension Kit

External Flat Frame Horizontal

Text Panels

External Flat Frame End Pieces

Countersunk Screws

Internal “Grooved and T” Frame

C1

Division Of Critical Care

Department of Araesthetics

Birthing Centre


PROJECTING CS300P SIGNS

The SignLink CS300P projecting sign utilizes the same outer sign frame as the CS300 ceiling suspended sign, except that it mounts onto the wall so that it projects out at 90 degrees. These signs are primarily used in hallways, locations to identify facilities which otherwise would not be readily seen from the beginning of a hallway. The sign appears as a blade which projects out from the wall. This sign type is primarily used for small to medium size signs. A maximum width of 500 is recommended. All fixings are internal. The standard frame finish is satin natural silver anodized. Face plates can be any sheet material up to 1.6 thick.


CEILING SUSPENDED HALLMARK SIGNS CS400H SERIES

Signlink CS400H series Hallmark ceiling suspended signs are comprised of a robust outer frame 25mm deep x 1mm thick. The signs can be set up so that they have either permanent face plates or front loading interchangeable panels, or combinations of both. The face plates can be any nominated material up to 3mm thick. The signs are available in any nominated size (no standard signs) with the exception that either the height or width cannot be less than 110mm. The sign offers the designer maximum flexibility in that they can be made to any particular size to suit the design and the face plates can be whatever material suits the application. Composite aluminium panels which are digitally printed are the most widely used type.

Another significant benefit of the design is that the interchangeable panels are front loading. No disassembly of the sign is required. This feature makes it easy for non-technical staff to change signs as required.

The signs are supplied with stainless steel wire with cable mount fittings which allow for level adjustment. The fittings are chrome plated brass. Alternatively, the signs can be fittied with rigid rod fittings. The standard finish for the sign is satin natural silver anodised.


PROJECTING HALLMARK SIGN CS400HP

The projecting Hallmark sign has the same construction as the ceiling suspended model (CS400H) except that it is not supplied with ceiling suspension fittings. Rather, it has provision for mechanical fixing internally through the side that butts up to the wall. When mounted in place it appears as a panel at 90 degrees to the wall. The sign sits flush up against the wall without any visible fixings.

The face plates can be either permanent, interchangeable or combinations of both. The signs are supplied in any nominated size with the proviso that the height and width cannot be less than 110mm. The sign has a particularly robust frame which makes it suitable for large signs, however wind loading must be taken into account if signs are situated in external locations or in entrances which have wind tunnel effects. It is recommended that signs be mounted into solid walls. If being located onto gyprock walls, position the sign so that an internal vertical stud can be used to fix units. The standard finish for the sign is satin natural silver anodised.

DERNIER DOOR PLATES DP100 SERIES

Copyright c 2006 Sign Supply Corp (w/sale) Pty Ltd SignLink products are protected by patents. D1

DERNIER DOOR SERIES

The “SignLink Dernier Series” of door plates are ideally suited for commercial offices, hospitals, medical suites and similar organizations where a simple slimline name plate is required which is interchangeable and has no visible fixings. The Dernier range has several different models which provide for most typical requirements including: single door plates, multiple line door plates, door signs which incorporate sliding plates, paper insert plates, door plates which accept engraving laminates and combinations of all these different types. Security models are also available.

The Dernier series door plates all have similar features. They all have interchangeable face plates and a fixed mounting plate. The faceplate has a recess in the back which houses magnetic rubber which enables it to attach magnetically to the mounting plate. The mounting plate has two small vertical returns to enclose the ends of the faceplate. Where there are two or more faceplates in a sign, it is supplied with a single mounting plate to suit the overall sign size.

The Dernier series door plates are well suited to be mounted on opening doors as they are all held firmly in place by a magnetic strip - they will not move or rattle. Fixing of the signs is by means of double sided tape being applied to the back of the mounting plate. Often the signs are mounted on internal glass walls or windows. A vinyl cover plate is generally mounted on the rear face of the glass to conceal the double sided tape.

The signs have minimal components. There are no separate end pieces or mounting clips to get lost or broken. You can expect the the signs to give many years of service. The signs can be fitted with special mounting brackets which enable them to clip into work station furniture.

Some situations require a door sign which is permanent rather than interchangeable. The Dernier Series can be permanently mounted by substituting double sided tape for the magnetic strip.

SINGLE LINE DOOR PLATE

Mounting Plate

Magnetic Strip

Face Plate DOOR PLATE DP100-S

D1


DERNIER DOOR SERIES

DOOR PLATE - DP100 - S This model is the standard single line door plate. The face plate is 3.8mm thick and is suitable to have vinyl lettering applied or to be engraved and paint filled.The standard finish is satin natural anodised. Custom painting is available on request.

Standard sizes are:- 297 x 42mm 297 x 50mm 297 x 84mm450 x 42mm 450 x 50mm 450 x 84mm600 x 42mm 600 x 50mm 600 x 84mm

Custom sizes are available in the following standard panel heights: 21mm, 25mm, 30mm, 35mm, 42mm, 50mm, 63mm, 84mm, 100mm, 125mm

Multi line door plates are available on request - DP-100-M

DOOR PLATE DP100-SP

Mounting Plate

Magnetic Strip

Face Plate

DOOR PLATE DP100-M

D2

SINGLE LINE DOOR PLATE

DOOR PLATE WITH SLIDER DP100 - SPThis model incorporates a sliding plate which covers half the sign. The sliding plate enables the sign to be able to display two different messages. For example “Vacant” or “In Use” is a common application.The sliding plate covers whichever message is not needed.

The sliding plate is a satin natural anodised plate. The door plate itself is also satin natural anodised.

Standard sizes are :-

80 x 35mm 200 x 35mm 297 x 35mm 400 x 35mm100 x 50mm 297 x 50mm 400 x 50mm, 297 x 105mm400 x 105mm

DOOR PLATE WITH SLIDING PLATE

DOOR PLATE - DP100 - SSECSECURITY DOOR PLATE

As the name implies, this model is a security door plate. All sides of the sign are fully enclosed which results in the face plate not being able to be readily removed by unauthorised persons. This model has been specifically developed for universities where security is a significant issue. All the different models listed below are available in the security format with the proviso that 42mm high is the minimum height. The face plate simply plugs into the sign body in a front loading position. It is removed by means of a suction cup.

Door plates available with security trim• Single line door plates (DP 100 S SEC)• Multiple line door plates (DP 100 M SEC)• Door plates with slides (DP 100 SP SEC)• Paper insert plates (DP 100 PI SEC)• Door plates which accept engraving laminates (DP 100 EC SEC)• Combination of the different types

DOOR PLATE DP100-SSEC

Mounting Plate

Magnetic Strip

Face Plate

Security Trim(Top and bottom)


PAPER INSERT DOOR PLATE DP100 - PI

This model accepts a paper strip which mounts behind a clear plastic face plate. These signs are widely used in large offices where it is necessary to have an individual name plate for all the staff.This model offers the user the facility to be able to change the names themselves by simply printing the name on their inhouse desktop publishing equipment. This minimises the cost for the organization as well as enables them to change the names as they need to. These signs are available in two standard heights of 35mm & 50mm. The sizes are based on working with standard paper sheet sizes. Standard finish is satin natural anodised

Standard sizes are :-

110 x 35mm 147 x 35mm 210 x 35mm 297 x 35mm 110 x 50mm 147 x 50mm 210 x 50mm 297 x 50mm, 297 x 105mm

DOOR PLATE TO SUIT ENGRAVING

LAMINATE. DP100 - EL

This sign accepts a strip of standard engraving laminate @ 1.2 or 1.5mm thick. Engraving laminate is available in a very wide range of colours and finishes such as woodgrain or marble. These type of signs are often used in schools or high traffic areas where standard vinyl lettering is susceptible to vandalism. The signs are available in two standard heights of 35mm and 50mm in the standard finish of satin natural anodised. The sign companies generally supply their own engraving laminate strip.

Standard sizes :-

297 x 35mm 450 x 35mm 600 x 35mm297 x 50mm 450 x 50mm 600 x 50mm297 x 105mm, 400 x 105mm

DERNIER DOOR SERIES

DOOR PLATE DP100-PI

Mounting PlateMagnetic Strip

Paper InsertClear Polycarbonate Cover

Paper insert Faceplate

DOOR PLATE DP100-EL

Mounting PlateMagnetic Strip

Engraving Laminate

Slider Holder Faceplate

D3

PAPER INSERT PLATE

DOOR PLATE WITH ENGRAVINGLAMINATE FACE PLATE


COMBINATION DOOR PLATE WITH SLIDER DP100 - CSP

This sign is a sign with two face plates - the top plate being a standard door plate while the second plate below is a door plate with a sliding plate. These signs are often used to display a room name on the top plate with a changeable message underneath. Standard finish is satin natural anodised.

Standard sizes :-

297 x 100mm 400 x 100mm ( both face plates @ 50mm H)

COMBINATION PAPER INSERT DOOR PLATE DP100 - CPI

This sign is a sign with two face plates - the top plate being a standard door plate while the second plate below is a paper insert plate. The typical use for this model is for the top plate to have a company logo with the bottom paper insert plate displaying a printed name. Standard finish is satin natural anodised.

Standard sizes :-

110 x 100mm 147 x 100mm 210 x 100mm

DERNIER DOOR SERIES

DOOR PLATE DP100-CSP

DOOR PLATE DP100-CPI

COMBINATION DOOR PLATE WITH SLIDER

COMBINATION DOOR PLATE WITH PAPER INSERT

COVER PAGE FOR PERMA PRINT PLAQUES

PERMA PRINT PLAQUES

Copyright c 2006 Sign Supply Corp (w/sale) Pty Ltd SignLink products are protected by patents. E1

‘PERMA PRINT’ PHOTO ANODISING

E1

Signlink ‘Perma Print’ photo anodising is a ‘top shelf’ printing process that delivers full photo-graphic quality prints which are embedded into aluminium panels. This printing process is suitable for both internal and external applications. The printed panels when complete have an attractive metallic lustre which makes them suitable for use in high profile locations such as board rooms and the like. The ‘Perma Print’ photo anodised graph-ics give a real wow factor to the sign.

The graphics are long lasting, lightfast, weather and chemical resistant images impregnated into the surface of the aluminium. The pores of aluminium are opened and highly stable dyes are printed into the metal (below the surface). A thermochemical sealing process then locks in the dyes and the resultant image possesses remarkable durability characteristics. Images produced are not limited to solid areas of one colour, but can be full colour imaging reproduced from photographs and colour blended artwork. ‘Perma Print’ complies with US Military specification A8625 Federal Standards P455B type ii.

The image cannot be affected by any solvent. All multicoloured images have been extensively tested by full immersion in Kerosene, Petrol, Methyl Ethyl Ketone, Ethyl Acetate, Ethyl Alcohol, Oil and Grease with no detrimental affect.

The ‘Perma Print’ photo anodised panels have been extensively used for opening plaques for public buildings and facilities as well as information plaques for zoos and historical plaques. They are ideally suited to be used by local councils because of their anti-graffiti qualities and longevity. The print can be produced to match any nominated PMS colour. The printed panels can be supplied mounted in Singlink frames if required. The frame enhances the appearance of the photo anodised panel and profices a means of mechanically fixing the panel in place without any visible fixings.

POSTER DISPLAYS

Copyright c 2006 Sign Supply Corp (w/sale) Pty Ltd SignLink products are protected by patents. F1

POSTER DISPLAY

COMPARISON CHART

F1

Posters DisplayComparison Chart - part one

Posters DisplayComparison Chart - part two

Standard sizesCustom size to orderLIterature load methodFrame ShapePoster SecurityThickness of frameSuitable for external useSuitable for multiple postersBorder sizeEase to change posterCustom painting availableSNA standard finishBorder type (covers larger than A3 to have aluminium strip border)

Cover materialAvailable in kit formSuitable for mechanical fixingRobust designSign body available without cover

ALPHA PANACHEAVANTGARDE

A5,A4,A3

Yes

Side Loading

Square

3/10

10mm

No

No

5mm

8/10

Yes

Yes

Extruded Frame

1mm / Polycarbonate

Yes

Yes

2/10

No

A5,A4,A3,A2,A1,A0

Yes

Front

Square

7/10

6mm

No

No14mm for A5-A3

28mm for larger than A3

10/10

Yes

Yes

Printed

1mm / Polycarbonate

No

No

2/10

Yes

A4,A3,A2,A1,A0

Yes

Front

Semi quadrant

7/10

14mm

No

No14mm for A5-A3


10/10

Yes

Yes

Printed

1mm / Polycarbonate

No

Yes

7/10

Yes


Cover materialAvailable in kit formSuitable for mechanical fixingRobust designSign body available without colour

DISPLAYMAX

A2,A1,A0

Yes

Front

Square

7/10

12mm

No

No14mm for A5-A3


10/10

Yes

Yes

Printed

1mm / Polycarbonate

No

Yes

7/10

Yes

INFOPANEL

Yes

Front

Square

8/10

11mm

Yes

Yes

10/10

Yes

Yes

None

No

Yes

8/10

Yes

GRANDEUR

None

Yes

Front

Square

7/10

17mm

Yes

No


10/10

Yes

Yes

Aluminium trim2mm + Non-reflective

acrylic

No

Yes

7/10

Yes

None

None

None


POSTER DISPLAY

COMPARISON CHART

F1

Posters DisplayComparison Chart - part three


Cover materialAvailable in kit formSuitable for mechanical fixingRobust designSign body available without cover

PANORAMA PORTFOLIODOUBLE SIDED

GRANDEUR

None

Yes

Front

Semi quadrant

10/10

25mm

Yes

Yes

25mm

9/10

Yes

Yes

Extruded frame4,5mm polycarbonate

or acrylic

Yes

Yes

10/10

Yes

None

Yes

Front

Shark nose

10/10

25mm

Yes

Yes

25mm

9/10

Yes

Yes

Extruded frame4,5mm polycarbonate

or acrylic

Yes

Yes

10/10

Yes

None

Yes

Front

Square

7/10

25mm

Yes

No


10/10

Yes

Yes

Aluminium trim

1mm / Polycarbonate

No

Yes

7/10

Yes


AVANT GARDE POSTER DISPLAY

The Avant Garde poster display has an extremely thin outer frame to create a minimalistic slimline appearance. It utilizes the same sign body as the Avant Garde directory, except that it has a removable polycarbonate cover instead of directory panels. The poster is housed behind the cover which has a 14mm wide screenprinted silver border around the perimeter. Sizes A2 and larger have a 28mm w border. This model is ideally suited to be used in office situations to display A4 sheets and the like. The cover is removed with a supplied suction cap. The unit is also available in a form which incorporates a separate header panel.This panel is usually used to display corporate

mechanical fixing. It needs to be installed with double sided tape and glue. Standard finish is satin natural anodised. This model is also supplied without a cover. The sign company supplies their own print which is encapsulated in clear film or laminated to a thin substrate. Self adhesive magnetic tape is supplied which the sign company applies to the back of the print. This makes an extremely economical, functional sign, which is very secure with edge to edge display. The Avant Garde poster display in this form has been extensively used in retail outlets for menu systems. It is very easy for the customer to replace the panels when an item on the menu changes. They simply remove the old print with the suction cap and insert the new one which is supplied by the sign company. The system always looks good. Staff do not have to have any particular mechanical aptitude the change the sign.

STANDARD SIZES WITH COVERS

A5, A4, A3, A2, A1, A0

FEATURES

* Slimline model* Available with or without covers* Functional design

AVANT GARDE PD910

F2

logos. The sign is also available in the form of a Pivot Poster, which is supplied with the plastic cover hinged across the top edge. This type of cover allows a slightly longer display area for the poster. The Avant Garde model is not suitable for


The Alpha model poster display has been designed as a low costl model. The poster is displayed between a polycarbonate face panel and a signwhite back plate. This model offers the advantage of edge to edge display (the poster is only covered over 3mm all round the perimeter by the outer trim). The top trim is removable which allows the polycarbonate cover with the poster behind to slide out of the frame from the top. The top trim can be secured either magnetically or by two screw fixings. The sign can be mounted in place either by mechanical fixings or glue and double sided tape. Standard finish is satin natural anodised.

STANDARD SIZES

A5, A4, A3

Non standard sizes available on request

FEATURES

* Very cost effective* Edge to edge display* Lockable trim

ALPHA POSTER DISPLAY & DISPLAYMAX POSTER DISPLAYALPHA PD901

DISPLAYMAX PD920The Displaymax model looks similar to the Avant Garde model except that it is slightly deeper @ 12mm thick. It functions in the same way with a front loading polycarbonate cover which is held in place magnetically. The cover has a screenprinted 14mm wide border all round the perimeter. Models larger than A3 have a 28mm W border. The Displaymax model has a strong frame which is connected with corner stakes.It is suitable for sizes up to 1200 x 1500mm however the largest standard size is A0. This unit is mounted by mechanical fixings. Keyhole fixings available on request. It is suitable to be mounted in wall recesses. The Displaymax is available in two standard anodised finishes of satin natural silver and black.

STANDARD SIZES

A2, A1, A0

FEATURES

* Available in satin black and satin silver anodised finish.

* Suitable for sizes up to 1200 x 1500mm* Suitable for mounting in wall recesses

F3


INFOPANEL POSTER DISPLAY

FEATURES

* Edge to edge display* Incorporates wall rail mounting system* Suitable for sizes up to A0

INFOPANEL PD925

F2

The Infopanel Poster Display is primarily used to mount posters which are laminated onto a display substrate (such as 3mm thick composite aluminium) which in turn mount into the sign body and attach magnetically to the back of the sign. The outer edges of the poster sit flush up against the inside edge of the Infopanel frame which is only 1mm thick, hence the posters have a frame-less appearance – there is no outer border other than the 1mm thick sign frame. The signs are supplied with a wall mounting rail which enables the sign to be mechanically fixed. The maximum recommended size is A0. Standard finish is satin natural anodised silver.


The Grandeur model is the next model up the range from the Displaymax. It is similar in appearance and functionality to the Displaymax.The Grandeur has an extremely robust frame which is connected with double corner stakes in each corner. This model is suitable for large sizes in excess of 1200 x 1500mm. It is available in both satin natural anodised silver and satin black finishes. Typical uses include displaying large movie poster displays or product posters in retail outlets. It is mechanically fixed with the SignLink split batten. This model is not carried in a range of standard sizes. Each order is custom made to suit customer requirements. The Grandeur poster display is also available in a double sided form.It looks and functions the same as the single sided unit except that it is 25mm thick instead of 17mm. The double sided unit can be either suspended on stainless steel wires or rigid rod. The double sided unit is often used to display promotional material behind shopfront windows.

FEATURES

* Extremely strong frame - suitable for large sizes

* Available in satin black and satin silver anodised finish.

* Suitable for mounting in wall recesses

GRANDEUR POSTER DISPLAYGRANDEUR PD930 / PDP40

F4


The Panorama poster display is a high quality, robust display cabinet specifically designed to be used in environments where it could be subject to interference. It is ideally suited for use by Local Councils or State and Federal transport departments to display timetable or advertising information.

The Panorama model does not have any of the typical features of traditional cabinets such as hinges and locks which can attract the attention of vandals. When mounted in position it appears as a permanent display without any obvious way to open it. The sign has a unique double frame system, with a cover which is removable and is held in place by aggressive magnets. There are two options for the inner frame - either the “Exhibition” frame which is suitable for the larger sizes or the “Slenda” frame which offers edge to edge display. The standard cabinet finish is satin natural anodised. Custom painting is available. This model is not stocked in a range of standard sizes.

FEATURES

* Extremely strong cabinet* Suitable for external use* Very secure display* Posters can be readily changed* Clean lines - no locks, hinges etc

PANORAMA POSTER DISPLAY & PANACHE POSTER DISPLAYPANORAMA PD960

PANACHE PD950

The Panache model has distinctive styling. It has a very attractive semi quadrant frame which makes the sign very appealing to the eye. It appears as a slender cabinet with a discreet curved outer frame. It has a front loading magnetic cover which incorporates a screenprinted border with magnetic tape behind. The model operates in exactly the same way as the Avant Garde and Displaymax models. This model is available in a range of finishes including satin natural anodised, polished bright gold and silver anodised.This model is primarily suited for internal use.

STANDARD SIZES

A4, A3, A2, A1, A0

FEATURES

* Very attractive semi quadrant frame.* Available in decorative silver and gold finishes* Slimline design

F5


The Portfolio poster display is the top of the range model. It is a very handsome unit which is very secure and heavy duty. It is ideally suited to be located on external walls of pubs and night clubs.The Portfolio model has a striking frame which incorporates a recessed pin stripe which can be paint filled or have vinyl inserted. This model has the same features as the Panorama model except that it has a more prominent frame. The frame has a softly rounded shark nose shape making it very safe for external use. The sign can also be mounted between two posts to display public notices. The Exhibition frame can accommodate 5.38mm thick laminated glass enabling it to be used in restaurants as a write on / wipe off menu board. The glass can have a contrasting vinyl or digital print applied to the rear. It makes a very modern, attractive menu system. Standard finish is satin natural anodised. Custom painting available.

FEATURES

* Extremely strong cabinet.* Very attractive shark nose frame* Very secure display* Can be mounted between two posts

for freestanding applications* Can be set up as a glass write

on / wipe off board

PORTFOLIO PD970

PORTFOLIO POSTER DISPLAY

F6


PORTFOLIO FREESTANDING & WALL MOUNTED NOTICE CABINET

F2

PORTFOLIO FREESTANDINGNOTICE CABINET

This cabinet is widely used in organisations such as schools and churches to display public notices. The cabinet can be set up with combinations of permanent and interchangeable information.

PORTFOLIO WALL MOUNTEDNOTICE CABINET

The Portfolio model makes a handsome cabinet to display notice information. It has been widely used in residential complexes to display strata notices. The cabinet can be set up with either pinnable frontrunner backgrounds, cork or magnetic material.

WALL PANELS

Copyright c 2006 Sign Supply Corp (w/sale) Pty Ltd SignLink products are protected by patents. G1

Wall panels are used in a wide range of applications when signposting commercial complexes. They can be used for small notice signs, pictogram panels, directional signs through to sophisticated foyer signs with high levels of finish which reflect

yaw lanoitidart ehT .egami etaroproc s’tneilc ehtfor the sign trade to supply a wall panel has been to simply mount a flat sign plate on a wall. The SignLink range of wall panels offers the sign craftsman the opportunity to supply a sign with a much higher level of finesse than a flat plate. It converts flat plates into signs which have some body with all edges enclosed. Panels can be either interchangeable or permanently fixed. All panels have secret fixings.

The range is comprised of seven models:

ALPHA WALL PANELWP201 This model has a slimline anodised aluminium frame which is mitre cut at the corners to fully surround the sign plate. The frame incorporates an internal screw flute which enables the end pieces to be removable so that face plates can be interchangeable. Face plates can be any sign sheet material up to 1.6mm thick. This sign type offers the customer the facility of updating signs without having to replace the whole sign. Face plates are relatively cheap to replace as they are not proprietary items. For this reason these panels are widely used by hospitals.

The frames are supplied to the sign trade in a range of standard sizes with or without face plates. This model is suitable for small to medium sized panels up to 1200 x 300mm high.

STANDARD SIZES

HORIZONTAL FRAMES

150mm, 300mm, 400mm, 600mm, 800mm, 1000mm, 1200mm

VERTICAL END PIECES

100mm, 150mm, 200mm, 300mm

Custom sizes available on request.

WALL PANELS

G1


OUTLOOK WALL PANELS

This panel consists of two horizontal wall rails and a 1.2mm thick text plate. The text plate is secured by the two wall rails, and has 5mm returns enclosing the ends of the sign.

The text plate is interchangeable by moving the top wall rail up 3mm, which releases the text plate. The text plate and wall rails are satin natural anodised. Custom painting is available on request. This model has been widely used to make a range of small internal signs wich are typically needed in all commercial buildings. The sign is available in a range of sizes between 50mm and 210mm high and up to 1600mm long.

The signs are supplied on an individual order basis. No standard sizes are stocked.

WALL PANELS

G2


AVANT GARDE WALL PANELWP210

WALL PANELS

G2

The Avant Garde wall panel is a slimline sign with an unobtrusive low profile which is ideally suited to be used for a range of small and medium sized signs in modern buildings. Typical applications include door signs, directional signs, regulatory signs, pictograms, plaques and information signs. The wall panel is part of the Avant Garde family of signs which also include directories and poster displays, hence designers are able to maintain a design theme throughout the building.

These signs have been widely used in high profile locations. Photo anodised panels have been extensively used to create impressive signs which include signs with subtle background designs and striking graphics, all in photographic quality.

Images can be produced in full colour. Panel sizes can be made to suit the nominated design. Face plates can be either permanent or interchange-able. They are also suitable to accept linable and tactile elements as required. The standard finish is satin natural anodised silver. Custom painting is available on application.


DISPLAYMAX WALL PANELWP220

WALL PANELS

G2

The Displaymax wall panel is the next model up the product range after the Avant Garde model. It has a more substantial frame at 12mm deep. It is best suited for small to medium size signs, particularly where they are required to be mechanically fixed. Otherwise, it looks and operates in the same way as the Avant Garde model. It has mostly been used for external signs. Face panels can be either permanent or interchangeable. The standard finish is satin natural anodised silver. Signs are made to suit any nominated sign.

INFOPANEL WALL PANELWP225

This model has been designed specifically to accept pin board materials such as knomenie and cork. It appears the same as the Displaymax model with the same frame shape and depth. The Infopanel also has a wall mounting rail which mounts into a recess at the back of the sign – then enables the installer to fix into vertical wall studs when mounting onto gyprock walls. The signs in the photo illustrate signs which have been fitted with paper grip strips across the top of the pin board segment.


WALL PANELS

GRANDEUR WALL PANELWP230This panel is designed for the larger range of wall panels. It has a very substantial frame which can be mechanically fixed to the background, even over rough surfaces. The frame has a square edge and even though it has significant internal members the frame does not feature when viewed from the front - it is only 1.2mm thick and 17mm deep. The frame will accept face plates up to 6mm thick. The frames are available in satin natural anodised or powdercoated white finish. They are generally supplied to the sign trade in a knock down kit form. The corners are connected with double corner stakes which are supplied.

PANACHE WALL PANELWP250This is a particularly handsome model which has a petite radius edge 7mm wide all round the sign. It is often used in situations where the wall panel is required to make a statement in terms of its appearance, such as foyer signs or plaques. The frame is available in satin natural anodised finish, polished bright silver and polished bright gold anodised. Face plates are often panels such as stainless steel or SignLink “Perma Print “ photo anodised panels. This sign makes an ideal plaque.

G3


This panel is suitable for the very large sign panels. It is capable of spanning across building facias if required. It will accept face plates up to 15mm thick Standard finish is satin natural anodised.

WALL PANELS

PORTFOLIO WALL PANELWP270This model is the big brother of the Panorama model. It has all the same features of the Panorama except that it has a pronounced outer edge with a shark nose shape @ 50mm wide. It also incorporates a 5mm wide shadow line recess which can have vinyl striping inserted or be paint filled in a contrasting colour. This frame is very suitable to be used for large panels at ground level where the panel needs to have a frame with distinguishing aesthetic features. The frame has rounded edges making it very suitable for high pedestrian traffic areas. Standard finish is satin natural anodised. Custom painting is available on request.

G4

PANORAMA WALL PANELWP260

Custom painting is available on request. The ‘kindelin’ sign has been fitted with horizontal security trims as the panels are interchangeable.

SIGNLINK SPLIT BATTEN

Copyright c 2006 Sign Supply Corp (w/sale) Pty Ltd SignLink products are protected by patents. H1

HD2 Model (Available Feb 2011)

THE SIGNLINK SPLIT BATTEN

H1

The SignLink Split Batten range is comprised of three models, LB, HD1 and HD2. They are self-mating aluminium extrusions used to mount signs and fixtures to walls and facias.

One batten is screwed to the wall in a horizontal position so that it goes across the internal vertical wall studs, thus enabling it to be fixed into something solid. The second batten is mounted on the back of the sign so that when located in position the two blades interlock. The blades of the split batten form a “wedge” connection that is very strong. When the split battens are under load, the two blades bite together making a very robust fixing mechanism. The HD1 and HD2 models have a semi circular groove, which forms a 5mm dia. hole when the two blades come together. The groove can either be filled with silicon for a permanent connection between the two blades or alternatively a 5mm threaded rod can be inserted which enables both battens to be locked together. The rod can be removed with either a punch or magnet.

Both the LB and the HD2 models have been designed with internal shoulders which results in both battens locking firmly into place, preventing any further movement down the wall once they are under load.

The SignLink Split Battens have been designed to work with the SignLink range of directories, wall panels, and poster display units. Most of the models have a recess at the back which will house the split batten so that once installed the sign will mount flush up against the wall. If the split battens are used to fix sheet material on fixtures such as cabinets etc, the LB model mounts 5mm of the wall and the HD1 and HD2 mount 8.5mm of the wall.

The split batten is a very efficient cost effective method of mounting panels to the wall. In many cases it will have the effect of reducing installation costs. Large signs can be installed by one man instead of two. The split batten generally makes installation easier and quicker as compared to traditional fixing methods.

Apart from sign panels and the like, it has been used to install individual letters on building facias. The battens are cut into smaller lengths to suit the width of the letters. The split battens allow the sign company to achieve a mechanical fixing when installing letters, without fixing through the letter face. The product also has many applications for the shop fitting trade.

It is supplied to the market in 4.8LM lengths in mill finish. Discount applies for buying in bulk.

HD1 Model

LB Model

Copyright c 2006 Sign Supply Corp (w/sale) Pty Ltd SignLink products are protected by patents. H2

THE SIGNLINK SPLIT BATTEN

H2

SIGNLINK SIGN SYSTEMS

Manufactured by Sign Supply Corp (w/sale) Pty Ltd

Unit 1/52-54 Stanley Street

Peakhurst NSW 2210

Phone: +612 9534 6340

Fax: +612 9534 6802

Email: [email protected]

www.signlink.com.au

Signlink Catalogue

Documents

Transcript of Signlink Catalogue