SIGNAL INTEGRITY REPORT · TEMPLATE FILENAME: SPM[SIZE_A](V.1).DOC 1.0 TEST SETUP AND DUT...

SIGNAL INTEGRITY REPORT

REVISION: ECN INFORMATION: TITLE: 1.85mm Angled 30-degree Solderless Precision Connector (TM14-0089-00) CARLISLE IT CONFIDENTIAL

SHEET No.

1 EC No: N/A

1 of 11 DATE: 06/ 30 / 2020

DOCUMENT NUMBER: SI ENGINEER: DESIGN ENGINEER ENGINEERING MANAGER

RSI- TM14-0089-00 R.Stavoli R.Bedient E.Soubh

TEMPLATE FILENAME: SPM[SIZE_A](V.1).DOC

SI Performance Summary (Attenuation & Reflections, Single-Ended)

* 10 connectors are shown. (10 measurements) For further details regarding testing setup, configurations please see the rest of the report.

Test and Measurement Performance Report Part Number TM14-0089-00 (1.85mm Angled 30-degree Solderless Precision Connector) Distribution: Internal & External Use



SHEET No.

1 EC No: N/A

2 of 11 DATE: 06/ 30 / 2020




1.0 TEST SETUP AND DUT Equipment, fixtures, and methods

Test method: All data measured from test PCB shown below and a N5227A PNA Network Analyzer

- Calibration was performed up to the

1. 85mm adapters using calibration

kit: 85058B

- Data was swept from 10 MHz to

67GHz for 6700 points

- Data averaging was turned off.

- Data is not dembedded and includes

the board trace/transition and two RF

precision connectors

Assembly Description

• T&M PN: TM14-0089-00

• Carlisle DUT PCB: Angled 30-

degree Precision Connector

CPW Test Board (Rev A2)

• All connectors measured on

same footprint (location #1)

• Port 1: 1.85mm vertical

mount CPW

• Port 2: 1.85mm Angled 30-

degree

Testing Samples:

• 10 Samples

• 10 Channels

• 10 THRU Measurements (10 Channels = 10 samples) -> -Single-Ended



SHEET No.

1 EC No: N/A

3 of 11 DATE: 06/ 30 / 2020




2.0 BOARD DETAILS & STACKUP

• Angled 30-degree Precision Connector Test Board CPW o Revision A, Coplanar Waveguide

• Dielectric Material: Tachyon 100G (Dk.2.97, Df 0.0014 @ 20 Ghz) o Thickness: 0.104mm / 4.11 mil



SHEET No.

1 EC No: N/A

4 of 11 DATE: 06/ 30 / 2020






SHEET No.

1 EC No: N/A

5 of 11 DATE: 06/ 30 / 2020




3.0 MEASUREMENT SET-UP (1.85MM ANGLED TO 1.85MM VERTICAL MOUNT CPW)

Measurements are not dembedded and include the 1.85mm angled 30-degree solderless precision connector, 1.85mm vertical launch CPW solderless precision connector, and the PCB (transitions + trace)



SHEET No.

1 EC No: N/A

6 of 11 DATE: 06/ 30 / 2020




4.0 SIGNAL INTEGRITY RESULTS (CIT: ANGLED PRECISION CONNECTOR CPW PCB)

Insertion Loss (S21), TM14-0089-00, 10 connectors measured, 10 measurements



SHEET No.

1 EC No: N/A

7 of 11 DATE: 06/ 30 / 2020




Return Loss (S11), TM14-0089-00, 10 connectors measured, 10 measurements



SHEET No.

1 EC No: N/A

8 of 11 DATE: 06/ 30 / 2020




Return Loss (S22), TM14-0089-00, 10 connectors measured, 10 measurements



SHEET No.

1 EC No: N/A

9 of 11 DATE: 06/ 30 / 2020




5.0 SIGNAL INTEGRITY RESULTS (CIT: ANGLED PRECISION CONNECTOR CPW PCB)

Insertion Loss (S21), TM14-0089-00 (1 connector) + Single-Position Core HC Cable Assembly #9



SHEET No.

1 EC No: N/A

10 of 11 DATE: 06/ 30 / 2020




Return Loss (S11), TM14-0089-00 (1 connector) + Single-Position Core HC Cable Assembly #9



SHEET No.

1 EC No: N/A

11 of 11 DATE: 06/ 30 / 2020




Return Loss (S22), TM14-0089-00 (1 connector) + Single-Position Core HC Cable Assembly #9

SIGNAL INTEGRITY REPORT · TEMPLATE FILENAME: SPM[SIZE_A](V.1).DOC 1.0 TEST SETUP AND DUT...

Documents

Transcript of SIGNAL INTEGRITY REPORT · TEMPLATE FILENAME: SPM[SIZE_A](V.1).DOC 1.0 TEST SETUP AND DUT...