SIGMACOVER 240

•All climates - No winter-grade or tropical versions•All industries•All substrates•All surface preparation standards•All specification areas

PROTECTIVE COATINGS

A TRULY MULTIFUNCTIONAL COATING !

2

•Arctic to Tropical•Air and surface temperatures -18°C to 50°C•Summer and winter•Maximum top-coating time 90 days -7°C to 30°C•Maximum re-coating time 6 months -7°C to 30°C•Potlife even at 32°C still 40 minutes

SIGMACOVER 240

ALL CLIMATES - NO WINTER-GRADE OR TROPICAL VERSIONS

3

•To touch•Handle•Lining immersion•Minimum recoating•Minimum top coating•Maximum recoating•Maximum top coating

SIGMACOVER 240Unique drying and curing time

-5ºC 0ºC 10ºC 20ºC 30ºC 50ºC

28h 24h 10h 5h 3h

48h 30h 13h 8h 6h

7d 7d 7d 7d 3d 2d

28d 14d 8d 5d 2d

40d 16d 10d 6d 3d

6m 6m 6m 6m 6m

3m 3m 3m 3m 3m

4

•Power generation•Chemical processing•Offshore•Marine•Bridges & highways•Storage tanks•Rail cars•Ballast water, fuel and mineral oil tanks•Crude oil storage

SIGMACOVER 240

ALL INDUSTRIES

5

ATMOSPHERIC

IMMERSED

AS TANKLINING

Steel• Blast cleaned• Ultra high pressure water jetted• Manual or power-tool cleaned

Concrete•Abrasive cleaning or acid etching

Galvanising•Light sweep blasted or chemically converted

Aluminium•Light sweep blasted or chemically converted

SIGMACOVER 240

ALL SUBSTRATES IN ALL SURFACE PREPARATIONS

6

•Direct to metal•Zinc silicate•Zinc epoxy•Standard epoxy primer•Prepared galvanizing•Prepared aluminium

TOP COATED WITH•Polyurethane•Epoxy polysiloxane (PSX® 700)•Epoxy acrylic (SIGMADUR™ 540) all available in a complete decorative colour range

SIGMACOVER 240

ALL SYSTEM COMBINATIONS

7

•Corus Corrosion resistance, ISO 12944 > C5/lm3•Norsok 501 rev5 System 3B Ballast water / Seawater •NSF Potable water•DNV / Marintec Class B1 for ballast water•NOHC Grain storage containers (not to be used in EU)•Lloyds Register Ballast tanks & double bottom tanks•ASTM E-84 Fire Resistance Class A Rating •MIL-PRF-23236C Type VII, Grade C, Class 5, 7, 9, 11, and 17•MIL PRF 4556F amend 1 and QPL requirements•MIL PRF 23236D Type V, Class 5, Grade C

SIGMACOVER 240

ALL SPECIFICATION AREAS – NUMEROUS APPROVALS

8

•Naval Research Laboratory authorized as better than 70%•Substrate tolerance•Longer coating life•Reliable average film thickness•Reducing stripe coating times

SIGMACOVER 240

SUPERIOR EDGE COVERAGE

9

• Our global engineering team promotes this product in all global specification(part of our global product offering)

•Available to all geographic regions, locations, licencees and distributors

SIGMACOVER 240

GLOBALLY AVAILABLE

10

•Thank you for your attention

SIGMA COATINGS®

A GLOBAL BRAND YOU CAN TRUST

AND SERVICE YOU CAN RELY ON

11