SIG-CORR series · SIG-CORR High-speed bundling. Very low maintenance. Strapping station for...
Transcript of SIG-CORR series · SIG-CORR High-speed bundling. Very low maintenance. Strapping station for...
SIG-CORRHigh-speed bundling. Very low maintenance.
Strapping station for multipoint glued and crash-locked cartons.
SIG-CORR
SIG-CORR
VersatileFor strapping 3, 4 & multi-point glued boxes
User friendly, intuitive controlsFormat change in less than 2 minutes
Maximum uptimeUp to 30 bundles per minute
Lowest total cost of ownershipRobust and extremely low maintenance
Highly ServiceableEasy access and simple strapping module removal
Highly ProfitableReduced personnel needs in auto / semi-auto mode
Strapping station for multipoint glued and crash-locked cartons. series series
Strapping station for multipoint glued and crash-locked cartons.
Signode has a policy of continuous product development and reserves the right to alter specifications at any time without prior notice.
SIG-CORRCapacity Bundles / minute max.Single strap up to 30Parallel straps (2) 17
Table belt speed 1,4 m/s
Specification
Bundles
Width 850: 130 - 850 mm 1250: 130 - 1250 mm
Power requirements
Strapping material
Polypropylene strap Dylastic® SBM 540 Strap dimension 5 x 0, 4 mm
Stable bundles - through accurate bundle compression and consistent strap tension
High productivity - quick format change and set up
No product damage - twin bottom, side and top drive belts for “Soft-Touch” handling
Flexible and adaptable - 2.000 formats can be stored in the memory
Intuitive controls - HMI control panel
High ROI - reduced personel needs, high productivity, compact and mobile
Features
Reference bundle size 300 mm (l) x 210 mm (w) x 150 mm (h)
Length min. 150 mm
Height 50 - 340 mmWeight max. 20 kg
Transport speed
Infinitely variable 0.40 - 1,40 m / sec
Strap tension
Adjustable 10 steps of tension levelsTension on bundle Infinitely variable up to 400 N
Sealing method Heat SealTypical joint strength 80% of strap break strength
Strapping coil
Core ID 200 mmCore OD 420 mmWidth 190 mm
Power Supply
Wide Range Input 380-520 V, 3 AC; 47 - 63 HzMaximum fusing 16 A (B-character)Protection type IP 54Total power consumption 0,98 kW
Pneumatics
Operating pressure 6 barAir consumption 4.2 L per cycle (free air)
Weight
Total weight Approx. 1.350 kg
Operating Conditions
Temperature Range +5ºC to +45ºC
series
© Signode 2016
Sweden: [email protected] Norway: [email protected] Denmark: [email protected] Finland: [email protected] www.signode-europe.com
Coil meterage 8.500 m
178178
1920
-211
019
20-2
110
Dimensions Illustrations show SIG-CORR 850 machine. SIG-CORR 1250 dimensions shown in red. Dimensions in mm.
Tabl
e H
eigh
t
Table belt width 850: 814 mm 1250: 1214 mm
14101810
Light tower Lengthbundle
Min
.50
Max
.340
Min
.50
Max
.340
Min.130 Max.850Min.130 Max.1250
Main power inletMain air inlets
2210
-240
022
10-2
400
10781278
Double electrically powered bundle compactors
Strapping machine in service position
820-
1010
820-
1010
17381738
24132413
Bundle sideadjustments
Operator HMI
Bundle entry direction
Strap coil detection photocell855
855
Strap coil quick change cassette
End of strap detection with residual strap ejection
Machine height adjustment option with rollers(fixed table height 910mm)Bundle stopper plate
Distance to strap placementMin. 25 Max. 580Min. 25 Max. 580
For 2 bundle stopper plate:Distance Min.115from plate to plate
Length adjustmentBundle endstop plate