SHREE BALAJI INDUSTRIES LLP...SHREE BALAJI INDUSTRIES LLP Works At- Plot No-12 , Sector- 07,...

SHREE BALAJI INDUSTRIES LLP

Works At-

Plot No-12 , Sector- 07, SIIDCUL, U.S. Nagar, Uttarakhand, 263153.

Mob : 9756654669 Fax/Tel :05944250765

Email : [email protected] , Website : www.sbillp.in

Zinc Aluminum Flake Coating

Future of Metal Coating

SHREE BALAJI INDUSTRIES L.L.P

mailto:[email protected]

http://www.sbillp.in/

PROFILE

LIMITED LIABILITY PARTNERSHIP COMPANY

DIRECTOR

Mr. Sachin Kumar Tibrewal (B.Tech ;Mechanical Engg.)


Our company SHREE BALAJI INDUSTRIES is only

Approved source for Ashok Leyland and Tata

motors for Zinc Aluminum flake coating,

Dacrotising and Heat Resistance Aluminum Paint

In SIDCUL Pantnagar Rudrapur.

infrastructure

1500 square meter plot at Sector 07, Plot No -12

SIIDCUL , Pantnagar

Shed Area 4000 square feet

Office and other construction 1000 square feet

Electricity Load – 75 KW (U.P.C.L)

Backup power – 62.5KVA Generator (CUMMINS)

Water- Available

Transportation- Easily Available

O.E.Ms like TATA MOTORS, ASHOK LEYLAND, BAJAJ AUTO,

MAHINDRA TRACTORS with in two kilometers.


Production ZINC ALUMINIUM Flake coatings are eco friendly, non

polluting , non - electrolytically applied coatings, which

provide good protection against corrosion.

These coatings consist of a mixture of zinc and aluminium

flakes, which are bonded together by an inorganic matrix

which is capable to with stand more than 1000hrs Salt Spray

Test.

Dacrotizing :Zinc Aluminium Flake in Chrome matrix.

Heat Resistance Aluminum paint.

Capacity: 300 Tons per month on dual coat basis.



AUTOMATIC DGREASING LINE :

PP BARREL TYPE AUTOMATIC 5 TANK PROCESS LINE WITH TRANSPORTER

WITH OIL SKIMMER AND HEATING

MACHINES

DIPSPIN - ACCUMEC make AUM 18T CJ (Tilt with

Cooling Jacket)



TECHNICAL SPECIFICATION:

•BASKET - 18inch diameter with bottom drop.

•PLC based Programmable Dip/Spin/Tilt cycle with HMI.

•Payload = 50 Kilos. Maximum

•Max. Spin RPM- 600. Spin at low RPM-30. Spin at Tilt 50 RPM Max. Spin in

both directions.

•Tilt at Spin Position only in one direction to 60 Degrees Approx.

•Stainless Steel paint Drum with insulated chiller jacket &FHP stirrer motor.

•Direct Drive with 4.4Kw TECO make AC SERVO motor

•PLC based Programmable Dip/Spin & Tilt cycle with – Omron/Delta or

Equivalent make.

•HMI – Omron/Delta or Equivalent make.

•TPC make Pneumatics and controls and BCH Panel Box.

DRYING OVEN

N.S.W MAKE TUNNEL TYPE GAS FIRED CONVEYOR

OVEN

L.P.G FIRED with temperature range up to 150ºC in

preheating zone and 350ºC in curing zone



LPG MANIFOLD SYSTEM :

ENGERY SOURCE TO OVEN WITH CAPACITY

Shot blast


ABRABLAST MAKE AIRLESS SHOT BLASTING MACHINE

TUMBLAST TYPE


Effluent Treatment Plant:

Capacity 2Klt per day


PLC SHOT BLAST PLC DIP SPIN PLC DGRESING LINE

PLC OVEN

Air compressor


MODEL : ASK 28 T

Motor power – 18KW

Free air delivery - 101cfm

Air receiver - 1000L

Quality equipments

SALT SPRAY TEST CHAMBER

PRESTO MAKE


WATER BATH DIGITAL PRESTO MAKE

(For Coating Weight Calculation)



HOT AIR OVEN

TO CALCULATE DRY WEIGHT OF COATING

ZAHN CUP FOR VISCOSITY

P.H. METER

HYDROMETER

DIGITAL THERMOMETER

LASER LIGHT TEMPERATURE METER

All chemical testing facilities available.

DT facilities also available in-house.



POWER BACKUP

62.5 KVA CUMMINS MAKE GENSET

DEGREASING

SHOTBLASTING

COATING

OVEN BAKING

AIR COOLING

COATING

PROCESS

AND

BAKING

PROCESS

IS

DONE

TWICE

P

R

O

C

E

S

S

F

L

O

W


Process



application:

Automotive High tensile Fasteners, Fasteners, Bolts, Nuts, Rivets, Screws and other threaded connecting

hardware parts, Springs, Spring Steel Parts, Clips, Clamps, Brackets and other stamping parts,

Brake Disc, Brake Drum, Brake Rotors etc.

Wind Turbine Industry

Blade assembly Bolts, Nasal assembly Bolts, Tower Construction Bolts and

Foundation Bolts Springs, Spring Steel Parts, Clips, Clamps, Brackets and other stamping parts

CONSTRUCTION

High Tensile bolts for bridges, for tunnels, for under water tunnels, for off shore platforms, nails,

wood screws, Fence, fasteners, Scaffolding metal parts, Self drilling screws, Hinges etc.

WHITE GOODS Fasteners, Springs and other small steel parts used in Air conditioners, Refrigerators, Vending

machines, Washing machines and Electrical Panels.

Railways

Bolts, Washers, Spring tension Clamps, Sleeper Screws, Crossing Bolts, Fish Bolts, Holding Bolts

Other Industry

Energy and infrastructure/Chemical Processing Industry/Marine Industry/ Petroleum & Gas Industry

High tensile Fasteners, Fasteners, Bolts, Nuts, Rivets, Screws and other threaded connecting

hardware parts. Spring Steel Parts, Clips, Clamps, Brackets and other stamping parts


PRODUCTS:

FASTENRES (ALL SIZE & ALL TYPES)

SCREWS (ALL SIZE & ALL TYPES)

NUTS (ALL SIZE & ALL TYPES)

BOLTS (ALL SIZE & ALL TYPES)

U BOLTS (ALL SIZE & ALL TYPES)

CLAMPS (ALL SIZE & ALL TYPES)

BUSH (ALL SIZE & ALL TYPES)

RODS

BUMP STOP

WAHSERS

SPRINGS

DOOR HANDLE

SHEET METAL COMPONENTS

COMBI

ELIPTICAL CLAMPS

AND MANY OTHER PARTS.


Our customers: 1) MITTER FASTENERS

2) SIKANDS LTD

3) ULTRATECH SUSPENSION

4) TVS SUNDRAM FASTENERS LTD UKD

5) SHREE PATEL INDUSTRIES

6) PRABHA ENGINEERS

7) VMP SLAES CORPORATION

8) DEVCHAYA INDUSTRIES

9) EUROKON EXPORTS PVT LTD

10) SHANDU ENGINEERS

11) WINDAL PRECISIONS

12) OXFORD FASTENERS

13) SEMPITERN

14) Citizen Exports

15) Panchratna Fasteners Rohtak

SHREE BALAJI INDUSTRIES LLP...SHREE BALAJI INDUSTRIES LLP Works At- Plot No-12 , Sector- 07,...

Documents

Transcript of SHREE BALAJI INDUSTRIES LLP...SHREE BALAJI INDUSTRIES LLP Works At- Plot No-12 , Sector- 07,...