Showcase your story!...Showcase your story! Precautions · If you are using your materials, please...
Transcript of Showcase your story!...Showcase your story! Precautions · If you are using your materials, please...
Record your
writing digitally
Record video &
sound
Make your own
material by putting a
special background.
Recorded written pages
can be downloaded
in PDF format.
Change your pen type
While you are recording.
Add sound effect
on your video.
Install PaperTube on your device
(Compatible with iOS 10.2 or higher /
Android 5.0 or higher)
Neo smartpen Ncode A4(Mandatory notebook
for Neo smartpen)
PaperTube ControllerTurn on PaperTube and touch
the icons with your Neo smartpen.
Paper CradlePut your device on the cradle and
use PaperTube.
It will make the process easier.
01
FeaturesSupplies
Showcase your story!
Precautions · If you are using your materials, please print those with Ncode A4 pages. The material should be printed on the paper side where Ncode™ & page numbers are printed, so please test printing before you start recording.
※ The screen image and UX may differ depending on which OS and version you are running.
· Ncode™ are only printed in the front side of Ncode A4.
· If you are using same set of Ncode A4 pages, be careful not to use the same pages
at the same time. (If you are using the same pages, your writing can be overlapped.)
PaperTube, express yourself the way you never imagine.
Make a video from the scratch Make a video by using your material1. 2. 3.
4. 5. 6.
1. 2. 3.
4. 5. 6.
Register your Neo smartpen
to PaperTube.
Press “record”
button
Write & record
your story
with Neo smartpen.
Press “finish”
button.
Your recorded video
will be saved
on your device.
Upload the videos to Youtube,
Facebook or other
social network services.
Turn the Bluetooth on of the device.
Touch [Use a blank notebook] button.
Write down and tell your story on the Ncode papers,
press “finish” button. It will be saved on your device.
A [Export Pages] window will pop-up when the saving is finished.
If you’d like to save/share the writing materials in PDF, press [Ok] and
choose how to be saved or shared.
While your pen is off, press the on/off button for 3 seconds until
the blue light is flashing, and press [Register] button.
Press “record” button.
step 1
step 2
step 3
step 4
step 5
step 6
Turn the Bluetooth on of the device.
Write down anything to test your printed material and start recording.
(Refer to step4~6 of “Make a video from the scratch”)
Touch [Use my own material] button.
When the pen is connected (Refer to step3 of “Make a video from the scratch”)
On the first page of the printed material, put a dot on the intersection point of
top horizontal line & left vertical line and also on the intersection
point of down horizontal line &right vertical line with your smartpen.
(If you printed several pages, put two dot in the center of the page with your smartpen
starting from the 2nd page of the materials.) This process will adjust the writing area
and the app screen area to be simultaneous.
You can choose from, [Take a Photo] is by taking pictures.
[Photo Gallery] is by selecting from saved images.
[Browse] is by selecting from images or PDF in cloud services.
Be careful to place the front side of Ncode A4 page where the Ncode™ are
printed to the paper tray. Press [Print now] for printing [Share] is by using
printers connected with your computer.
step 1
step 2
step 3
step 4
step 5
step 6