Shotblast and Painting Systems - … and Painting Systems. 4 ... manganese-steel internal lining)...
Transcript of Shotblast and Painting Systems - … and Painting Systems. 4 ... manganese-steel internal lining)...
58
The name speaks itself: In the Sprint shot blasting plant, pro�le beams and
sheets are thoroughly and quickly cleaned. Double sheave turbine wheels
provide an optimum shot blasting result with highest �ow velocities and
lowest blasting abrasive application. The maintenance of the plants can also be
done quickly because the systems are designed for easy access and easy
replacement of worn out parts.
Applications: steel fabrication, steel service center, wage-ladders, machine construction, automotive sector, crane manufacturer, shipyard, etc.
Sprint 1504, Sprint 1506, Sprint 2506, Sprint 3008
Shotblast Systems for Beams and Plates with Optimum Cleaning Effect
The Sprinter
Advantages at a glance � Passage range (b x h): Max. 3.000 × 650 mm
� 4 to 8 turbines (11 kW each)
� Suitable for a throughput of from 10,000 to 20,000 tons per year
� Triple housing (steel / manganese steel / exchangeable manganese-steel internal lining)
� Maintenance and user friendly
64
Having less is actually not desirable. But as far as maintenance is concerned,
everyone looks for less maintenance in the production process. The plants in
this series also focus on keeping everything „less“: less colour consumption,
less contact points, only one operation for the all round painting.
And therefore less time, less emissions, less cleaning and less maintenance.
There is only one point in which it is clearly more: the degree of automation.
The Maintenance Free One
Advantages at a glance � Passage range (b x h): Max. 4.100 × 700 mm
� Low paint consumption due to optimum spray gun concept
� Complete painting in a single pass
� Minimized material contact points with chain conveyor
� Use of water-soluble or solvent-based paints
� Low cleaning and maintenance times
KPC 1504, KPC 2504, KPC 3004, KPC 4004
Painting and Drying in a Single Package
Applications: steel fabrication, steel service center, wage-ladders, machine construction, automotive sector, crane manufacturer, shipyard, etc.
65www.kaltenbach.com
Circ
ular
Saw
ing
Mac
hine
sSe
rvic
eAu
tom
atio
nPa
intin
gSy
stem
sSh
otbl
ast
Syst
ems
Punc
h-/S
hear
M
achi
nes
Plat
epro
cess
ing
Cent
ers
Copi
ng/W
eldin
gRo
bots
Drill
ing
Mac
hine
sBa
nd S
awin
gM
achi
nes
Technical Data KPC 1504 KPC 2504 KPC 3004 KPC 4004Working range mm 1.500 x 600 2.500 x 600 3.000 x 600 4.100 x 600
working range Pro�le mm 1.000 x 420 2.500 x 420 3.000 x 600 4.100 x 420
working range Plate mm 1.500 x 80 2.500 x 50 3.000 x 40 4.100 x 30
Passage range mm 1.600 x 700 2.500 x 700 3.100 x 700 4.100 x 700
Number of spray guns 4 - 12 4 - 12 4 - 12 4 - 12
Coating System• High-pressure pump for paint• 200-litre drum with mixer• Drum lid with all necessary connections
(e.g. paint extraction device)• Pneumatic mixing-device lifter for easy
drum change • Continuous-�ow heater for consistent
paint temperature
Spray Guns• Spray guns apply paint to �nished parts
using an airless method • Clogging of the feed and discharge lines
is avoided through the continuous circu-lation of paint in the system
• Automatic height adjustment of the upper spray guns through photoelectric beams for optimum, economical paint application
Painting System• Two movable spraying bridges for positio-
ning spray guns (4 to 12 units)• Width of the spraying process is
adjustable • Automatic adjustment of the spraying
stroke to the feedrate• Bi-lateral optimized air�ow ensures
uniform application of coating • Low paint loss
KPC 1504KPC 2504KPC 3004KPC 4004
Applications: steel fabrication, steel service center, wage-ladders, machine construction, automotive sector, crane manufacturer, shipyard, etc.
68
L o g i s t i c + P r o c e s s C o n t r o l
Huge potential for increasing e�ciency in steel machining
We know how: KALTENBACH Logistic + Process Control
Everything in Motion
Customer requirements
• Plate processing• Profile processing • Tube processing
• Sawing• Drilling• Stamping
Planning Logistics
Production process
• CAD/CAM-Systems• Data processing
• Transport• Storage• Handling
69www.kaltenbach.com
L o g i s t i c + P r o c e s s C o n t r o lCi
rcul
ar S
awin
gM
achi
nes
Serv
ice
Auto
mat
ion
Pain
ting
Syst
sem
sSh
otbl
ast
Syst
ems
Punc
h-/S
hear
M
achi
nes
Plat
epro
cess
ing
Cent
ers
Copi
ng/W
eldin
gRo
bots
Drill
ing
Mac
hine
sBa
nd S
awin
gM
achi
nes
The automatic production control with LPC (Logistic Process Control) systems is already widespread in the manufacturing industry. Up to now in steel machining, however, only stand-alone solutions have been implemented in steel construction and the steel trade and these only automate individual machining steps. As one of the �rst suppliers to do so, KALTENBACH has now developed the KLPC (KALTENBACH Logistic Process Control) system which fully automates all machining steps – such as sawing, drilling, �ame-cutting, coping to shotblasting and painting – as well as the transport of the work piece between the respective machining processes, and visualises them in real time.
Via the DSTV interface, the KLPC system can adopt CAD/CAM data directly from higher-level ERP systems. At the same time, it visualises and reports the processing status of each job in real time back to the ERP system. The production manager thus gains for the �rst time a complete overview of the current processes in the machining and thus optimises existing machine capacities and the utilisation of production.
With the KLPC system, KALTENBACH is heralding a new era in steel machining. On the one hand, it o�ers huge potential for increasing e�ciency with the automation and optimisation of processes.
On the other, it creates the prerequisites in the �rst place for capturing the entire machining process, visualising it and thus gaining a detailed overview of it. Every company that uses KLPC can thus draw up more comprehensive and detailed plans and generate a clear competitive advantage with this.
How the right material and
associated information reaches the right
location at the right time and how, when
and where the current process data gets
reported back?
Key issues
• Shearing• Coping• Shot Blasting
• Painting• Measuring• Transport
Production process
Logistics Construction site
• Transport• Storage• Handling
• Fastening• Mounting• Handling
Keep it Flowing !
72
Advantages at a glance � Highest accuracy and productivity
� All from one source – for highest production reliability
� Modular and future-proof system
� A variety of automation levels from semi to full automation for complete processing lines
� Heavy and robust design
There’s no production without transport equipment. Sturdy roller conveyor
systems and cross transport systems guarantee an e�cient �ow of
materials in plate and steel processing. An extensive range of measuring
equipment generates full �exibility and required dimensional accuracy.
Cross Transport by Means of Drag Chains• Material stock in heavy-duty steel
construction• Sliding rails of synthetic material
(polyamide) for low-noise material cross transport
• Drag chains with transport claws• Drive system with continuously-variable
frequency-controlled gear motor
Cross Transport by Means of Lift-and-Carry System• Hydraulic liftable and lowerable lifting
beams running in both directions
• Drive system with continuously-variable frequency-controlled gear motor
Conveyor Roller System• Modular Expandable
• Executed in welded construction with maintenance-free, ball-bearing conveyor rollers of solid material
• Roller-conveyor drive on the feed and removal sides with frequency-controlled gear motor
Fully automatic Plate Processing centre• Automatic part removal and sorting
• Flexible programmed sorting location
• The size of the sorting range can be customised
Transport & Measuring
Efficient Flow of Materials is the Basis for Ultimate Productivity
73www.kaltenbach.com
Circ
ular
Saw
ing
Mac
hine
sSe
rvic
eAu
tom
atio
nPa
intin
gSy
stse
ms
Shot
blas
t Sy
stem
sPu
nch-
/She
ar
Mac
hine
sPl
atep
roce
ssin
g Ce
nter
sCo
ping
/Weld
ing
Robo
tsDr
illin
gM
achi
nes
Band
Saw
ing
Mac
hine
s
T13-Silencer• Contributes to enhanced occupational
safety and the protection of personnel and the environment
• Low-Noise Material Cross Transport
• Fully-automatic control
Marking System • Fast marking process for applying letters
and numerals
• Up to 22 characters without material movement
• Can be integrated into fully-automated handling processes
• Imprint still clearly visible after galvani-zing or painting
Contour Marking• Application of reference boundaries for
welding add-on pieces
• DSTV-Data import
• Use of high-speed carbide tools
• In addition to the three drill axis - marking from the bottom (4th axis)
Pusher Measuring System • Positioning drive through servo motor
with absolute rotary encoder
• Automatic NC positioning via machine software
• Hydraulic height adjustment for measu-ring various pro�le cross-sections
Length Stop Measuring System• Positioning drive through servo motor
with absolute rotary encoder
• Automatic NC positioning via machine software
• Rapid pivoting of the squaring arm
Autosorter• Process-assured full automation of the
feed side in pro�le handling
• Variable sorting positions possible
• For parts with mitre or straight cut from a length of 50 mm and up to a width of 1000 mm
74
KALTENBACH sets new standards in the area of customer service: Remote
maintenance of all equipment ensures the fastest possible repair in case of
malfunction, and therefore the highest possible equipment availability.
Our specialists can be reached via a service hotline that o�ers professional
support worldwide. A dense network of national and international service
partners in over 40 countries ensures the presence at short notice of a skilled
expert when needed. Our parts service ensures that users can get the
spare parts they need for their machines even after many years.
Advantages at a glance � Over 150 service technicians are available at more than 40 locations worldwide
� 1st level support through the local service organization
� 2nd level support through the specialists at the service helpdesk
� INITIAL ASSEMBLY: Consulting, Project planning, Organization, On-schedule, professional assembly/initial operation, Training
� Breakdown prevention through maintenance contracts (preventative maintenance)
� Worldwide express delivery of necessary replacement parts and tools
“From practical experience – to be put to practical use!“
A Service Network that is there for You – Right from the Start!
The Originals
Service
Find your local Service Partner:
www.kaltenbach.com
Originale die passen!
75www.kaltenbach.com
Circ
ular
Saw
ing
Mac
hine
sSe
rvic
eAu
tom
atio
nPa
intin
gSy
stse
ms
Shot
blas
t Sy
stem
sPu
nch-
/She
ar
Mac
hine
sPl
atep
roce
ssin
g Ce
nter
sCo
ping
/Weld
ing
Robo
tsDr
illin
gM
achi
nes
Band
Saw
ing
Mac
hine
s
Tools for Drilling Machines Saw Blades Saw Bands
Additives and Coolant
Original KALTENBACH-Tools: Assemble and produce
Tools
+49 7621 175-241spareparts@
kaltenbach.de
Original Spare Parts forKALTENBACH/Gietart Shotblasters
To ensure a smooth production process a shotblaster should be
maintained regularly. We would be pleased to help you with this!
We can o�er you the complete package, directly from the
manufacturer:
� original spare parts
� service
� maintenance
Sparepartsfor Shotblast
Systems+31 74 2 452 260
spareparts@ kaltenbach-sps.nl
� repair
� assembly
� consultancy
Order hereAll Information on our Homepage
Robotic Coping Machines
Band Sawing and Circular Sawing
MachinesDrilling
Machines
Measuring Systems
Shotblast system
Punching/Shearing Machines
Plate Processing CentersPainting
System
Transport Systems
Robot Welding System
Kaltenbach GmbH + Co. KG PP.O. Box 17 40 D-79507 Lörrach, Germany Blasiring 4 D-79539 Lörrach, Germany
Phone: +49 (0) 7621 / 175-0 Fax: +49 (0) 7621 / 175-477
[email protected] www.kaltenbach.com