SHIELD STANDARD 3 Spec Sheet - Shield Security Doors · Optional motorized lock with biometric...
3
SHIELD SECURITY DOORS LTD [email protected] SHIELD STANDARD 3 Designed for locations at high risk of burglary or forced entry Security Class 3 (RC 3) under European Standard EN 1627:2011 The Shield Standard 3 door is burglar resistant and designed to withstand entry from highly skilled attackers using heavy-duty tools such as hammers, wrenches, steel cutting pliers, and a 27 inch crowbar. It was tested at the renowned IFT Rosenheim laboratory in Germany and was awarded a Security Class 3 (RC 3) rating according to EN 1627:2011. The door is suitable for private houses, apartments and commercial buildings. The Shield Standard 3 door is designed to help create a secure environment for locations with elevated threat profiles or security challenges, providing protection against burglary or forced entry. Its 3-inch thick door leaf, patented design, and unique security features are the result of years of research, development, and testing against a wide variety of burglary methods. Additionally, the door was tested for internal and external penetration to ensure that it is as secure from the inside as from the outside. The Shield Standard 3 door comes with the following features: 1. Armored locks encased in drill resistant manganese plates to prevent manipulation. Optional motorized lock with biometric fingerprint scanner, GSM controller, and other high-tech access control capabilities. 2. High security cylinders with unique key management options. 3. Adjustable security hinges designed to easily adjust at installation. 4. A multi-point locking system that secures the door utilizing bolts on the lock side, top and bottom, and hinge side. This includes: • Four to ten bolts on the lock side. • One bolt into the top of the frame and one into the bottom. • Four 16mm diameter-locking bolts on the hinge side. 5. Superior heat and sound insulation thanks to a 6cm layer of rock wool. 6. A virtually unlimited range of architectural designs, millings, glazings and colors for the finishing panels to create a door that is both highly secure and beautiful. 7. An L-shaped doorframe profile which is fixed into the structural opening with 16 screws and protected by 24mm steel liners.
Transcript of SHIELD STANDARD 3 Spec Sheet - Shield Security Doors · Optional motorized lock with biometric...
SHIELD SECURITY DOORS LTD [email protected]
SHIELD STANDARD 3 Designed for locations at high risk of burglary or forced entry
Security Class 3 (RC 3) under European Standard EN 1627:2011 The Shield Standard 3 door is burglar resistant and designed to withstand entry from highly skilled attackers using heavy-duty tools such as hammers, wrenches, steel cutting pliers, and a 27 inch crowbar. It was tested at the renowned IFT Rosenheim laboratory in Germany and was awarded a Security Class 3 (RC 3) rating according to EN 1627:2011. The door is suitable for private houses, apartments and commercial buildings. The Shield Standard 3 door is designed to help create a secure environment for locations with elevated threat profiles or security challenges, providing protection against burglary or forced entry. Its 3-inch thick door leaf, patented design, and unique security features are the result of years of research, development, and testing against a wide variety of burglary methods. Additionally, the door was tested for internal and external penetration to ensure that it is as secure from the inside as from the outside. The Shield Standard 3 door comes with the following features:
1. Armored locks encased in drill resistant manganese plates to prevent manipulation. Optional motorized lock with biometric fingerprint scanner, GSM controller, and other high-tech access control capabilities.
2. High security cylinders with unique key management options. 3. Adjustable security hinges designed to easily adjust at installation. 4. A multi-point locking system that secures the door utilizing bolts on the lock side,
top and bottom, and hinge side. This includes: • Four to ten bolts on the lock side. • One bolt into the top of the frame and one into the bottom. • Four 16mm diameter-locking bolts on the hinge side.
5. Superior heat and sound insulation thanks to a 6cm layer of rock wool. 6. A virtually unlimited range of architectural designs, millings, glazings and colors for
the finishing panels to create a door that is both highly secure and beautiful. 7. An L-shaped doorframe profile which is fixed into the structural opening with 16
screws and protected by 24mm steel liners.
SHIELD SECURITY DOORS LTD [email protected]
SHIELD STANDART 3 – TEST REFERENCE The tools used to test doors to burglary resistance class 3 SHIELD STANDART 3 burglary resistance test at the iFT Rosenheim laboratory in Germany
SHIELD SECURITY DOORS LTD [email protected]
SHIELD STANDARD 3 – QUALITY TEST RESULTS
SHIELD STANDARD 3 fire test at IFT Rosenheim laboratory in Germany THE INSTALLATION INSTRUCTION OF SECURITY DOOR
