Sherline ER 25 32 40 50 Collet R8 ATC Headstocks Lathe Mill Motors
5
MAS, LLC, Home STORE ER Collet Headstocks Motor Upgrade for Sherline Photos About Us/Contact www.SherlineCollet.com System Conversions Need the Ultimate in Sherline(TM) Precision? You can now have the super precision and flexibility with our new patent pending ER25, ER32, ER40 and ER50 for the Sherline lathe, mill or custom setup! Our headstocks come preloaded with the spindle and bearing into a Sherline head casing. We use them in our everyday manufacturing process for our sister companies for precision .0005” TIR. In fact, we turn parts with our ER systems with .00005”+/- everyday...even though the Sherline headstock’s say they aren’t even rated for that kind of precision. Here are some benefits.... - Ridged Work Holding Hold your work piece much more securely than ever possible before. The tiny WW Sherline collets 1160 & 1162 or the Sherline chucks can’t even come close. The more surface area that you have clamped the better, right? You bet! Plus, our spindles have a through hole for extra long stock. - Larger Work Piece Size for Lathes and Tool Size for Mills Here is a breakdown of what your new Sherline collet spindle system can hold size wise: ER25 For collet sizes 1/16” to 5/8” - Through hole is .30”(optional .55”) ER32 For collet sizes 3/32” to 25/32” - Through hole is .55” (optional .789”) ER40 For collet sizes 1/8” to 1” - Through hole is .55” (optional .789”) ER50 For collet sizes .394” to 1.339” Through hole .789” You can now hold work pieces up to 1” in diameter in your lathe or your mill using collets. This truly allows you to get the most flexibility out of your Sherline like never before. Imaging the different end mills and cutters you can choose from or even a 3D alignment indicator or edge finder systems with a 3/4” shank! Universal Headstock? FACT: About 70% of or headstocks are sold to companies and engineers for custom projects. Our Sherline ER products are used by the following university labs:
description
Sherline Mill & Lathe Headstocks ER 25 32 40 50, R8 ATC and Motor upgrades from www.GlockCNC.com. View now for more great information
Transcript of Sherline ER 25 32 40 50 Collet R8 ATC Headstocks Lathe Mill Motors
MAS, LLC,
Home STORE ER Collet Headstocks Motor Upgrade for Sherline Photos About Us/Contact
www.SherlineCollet.com System Conversions
Need the Ultimate in Sherline(TM) Precision?You can now have the super precision and flexibility with our new patent pending ER25, ER32, ER40 and ER50 for the Sherline lathe, mill or custom setup! Our headstocks come preloaded with the spindle and bearing into a Sherline head casing. We use them in our everyday manufacturing process for our sister companies for precision .0005” TIR. In fact, we turn parts with our ER systems with .00005”+/- everyday...even though the Sherline headstock’s say they aren’t even rated for that kind of precision. Here are some benefits....
- Ridged Work Holding
Hold your work piece much more securely than ever possible before. The tiny WW Sherline collets 1160 & 1162 or the Sherline chucks can’t even come close. The more surface area that you have clamped the better, right? You bet! Plus, our spindles have a through hole for extra long stock.
- Larger Work Piece Size for Lathes and Tool Size for Mills
Here is a breakdown of what your new Sherline collet spindle system can hold size wise:
ER25 For collet sizes 1/16” to 5/8” - Through hole is .30”(optional .55”)
ER32 For collet sizes 3/32” to 25/32” - Through hole is .55” (optional .789”)
ER40 For collet sizes 1/8” to 1” - Through hole is .55” (optional .789”)
ER50 For collet sizes .394” to 1.339” Through hole .789”
You can now hold work pieces up to 1” in diameter in your lathe or your mill using collets. This truly allows you to get the most flexibility out of your Sherline like never before. Imaging the different end mills and cutters you can choose from or even a 3D alignment indicator or edge finder systems with a 3/4” shank!
Universal Headstock?FACT: About 70% of or headstocks
are sold to companies andengineers for custom projects.
Our Sherline ER products are used bythe following university labs:
Amazing Accuracy for Demanding Users
You no longer have to deal with the, “just OK”, accuracy of the Sherline chucks...or the super tiny Sherline WW collet system that don’t allow for thick or longer stock to be held. Remember, the more surface area that you are clamping...the more surface area you can cut. Of the ER systems we offer, using our ER32 and ER40 headstocks will allow you the maximum clamping surface area and the largest stock holding capabilities. What You Get In Our ER Spindle Pre-Loaded Headstocks - - Precision ER spindle TIR .0005” or better- Collet nut and wrench- Precision ball bearings good to 10,000RPM (high RPM will require custom pulley) Type Pre-loaded headstock ER25 $347ER32 $367ER40 $387ER50 $424.97 -Pulley - threaded & ready to use $49.00-Precision Angular Contact Bearings $300.00 - Factory sealed angular contact bearing option $99- Large Bore Option - $50.00- 600 Watt Industrial Duty Brushless Spindle Motor, Motor Controller and Mounts for standard Sherline Headstock (Speed controlled by rotary nob) $397
Precision Work Holding
Home STORE ER Collet Headstocks Motor Upgrade for Sherline Photos About Us/Contact
Please visit our store HERE or contact us for purchasing headstocks or
optional parts [email protected] Mon. - Fri. 9am to 5pmWe accept Paypal, Check (must clear first), wire Transfer ($25 wire fee)
Special note about the pulley: You will need to resize the stock pulley I.D. to fit the spindle. Some prefer to make their own pulley to fit the headstock. Others may not. Our 2 step pulley is $49.00.
All spindles are made to order. Approx. 6 weeks to grind, harden, balance,
build and then ship.
Do You Want To Use 3”, 4” or 5” Jaw Chucks?How About MT3 Collets?
You can now use most standard 3” jaw chucks or, 4” to 5” Jaw Chucks with an adapter plate. Your new Sherline headstock also has a MT3 bore for collets! You will get: • Quad ABEC-7 Bearings• .0004” TIR• MT3 Collet bore for upto 0.75” precision work holding• You can use more robust jaw chucks, chuck for 3”, can use adapter• You can use 4” or 5” chucks with adapter and headstock riser• 2 step pulley available or you can bore a stock Sherline Pulley
Price: Please Visit The Store For Price Build time is currently 3 weeks. Rush orders may be available at a premium.
Want More Power For Your Sherline(TM) Lathe, Mill or Custom Setup?
The stock Sherline motor is a good motor, however you may have noticed that it could really use more power...how about a boost to 600, 800, 1,000 or even 1,400 watts! That’s nearly twice the power. Plus, its High Torque at any RPM. Imagine using a 600 Watt High Torque Industrial Continuous Duty Brushless Motor on your lathe or mill. The standard pulley with our motor kit will give you about 4,780 RPM. If you want less speed and more power, you can simply make a smaller motor pulley. What you get: • 600 to 1,400 Watt High Torque Brushless Continuous Duty
Motor (fan cooled)• About the same weight as stock motor, but with much
more power• Complete bolt on replacement mounting kit• No modifications needed• Brushless controller with 2 digit tachometer (4 digit with
1,000 & 1,400 watt models)• Remote wired controller• Remote wired ON/OFF switch• Simple knob speed control• Max RPM on stock 90mm pulley 4,780 RPM • Motor is reversible through the controller• MACH3 controllable upgrade available• New belt included• 115 volt or 220 volt versions available• Want almost twice the torque instead of high speed? 55mm pulley is only $29
Ready for your new industrial motor upgrade kit? Visit the store order and just bolt it on and start making chips!
Note: All of our motor upgrade kits are custom made and take approximately 2 weeks to ship.
Precision Work Holding
Home STORE ER Collet Headstocks Motor Upgrade for Sherline Photos About Us/Contact
Please visit our store for purchasing headstocks oremail us [email protected] or call us
269-339-9425 Mon. - Fri. 9am to 5pmWe accept Paypal, Check (must clear first), wire Transfer ($25 wire fee)
MAS, LLC
Photos of our Sherline ER Collet Spindles
Home STORE ER Collet Headstocks Motor Upgrade for Sherline Photos About Us/Contact
Sherline Collet Headstock ER32
Sherline Collet Headstock ER32 Sherline Collet Headstock ER32
Sherline Collet Headstock ER32 Sherline Collet Headstock ER32
Here are several photos
showing the Sherline
Collet ER32 headstock on
a Sherline mill.
Above is the Sherline Collet ER32 standard bore headstock shown on the Sherline lathe.
MAS, LLC
Sherline Collet Systems
About MAS, LLC
Home STORE ER Collet Headstocks Motor Upgrade for Sherline Photos About Us/Contact
We started as a small manufacturing facility for performance engine parts and continue in that line of businesstoday. In the beginning, we searched high and low to find super precision tool setups for small lathes and mills.We settled on a Sherline CNC system and discovered it’s limitations on precision immediately. Everything seemto be off by up to several thousandths, even after taking considerable time to dial everything in. The Sherline productline up is great for the hobbyist, but it is just not suited for some industrial applications...until now. Necessity is the Mother of Invention After much trial and error, we developed our own adaptations to make our Sherline lathe a super precisionmachine. Developing a collet system that could handle long stock was the key for us. Amazingly, we were soon putting out parts with precision down to +/-.00005” out of round...and that was even beyond the specifications of the headstock itself! With this success, we decided...”Hey, if we love our setups so much,maybe others are looking for the same!”. So, there it is in nut shell.... MAS, LLC56 Piper AveBattle Creek MI [email protected]
Terms and Conditions All of our headstocks leave here fully tested. We offer a 60 replacement warranty against defective parts. Buying pays for shipping to us and we will pay for return shipping. For kits or products that must be installed by the buyer, we do not cover damage during installation (which I’m sure you know, but we had to say it). We are not responsible for any injury directly or indirectly relating to the use of our products. Please make sure to always use proper safety procedures and equipment. We do our best to make sure our website is updated and there are no errors. As our products change, the actual specifications or product appearance may change. We may also make the occasional typographical error too.
