sheet data - 3.imimg.com · UN R110 or NGV2-2007. H2020 made composites display high static...

2
Designed for Epoxy Filament Wound High Pressure Vessels data sheet HiPer-tex TM H2020 Roving HiPer-tex™ glass is a High Performance glass produced by 3B the fibreglass company. It is classified as high strength, high modulus R-Glass, by ASTM C-162, DIN 1259 and ISO 2078 standards. HiPer-tex™ glass displays outstanding mechanical properties that translate into 10% higher stiffness and 30% higher strength than conventional glass fibres. HiPer-tex™ glass is also a boron- free glass that presents significant improved corrosion resistance over a wide range of aggressive environments, including automotive battery acid. 3B’s HiPer-tex™ glass is produced with the latest and newest State of the Art glass manufacturing technology. Not only this technology displays the highest energy efficiency for the lowest environmental impact but it also enables production of glass featuring the highest level of consistency compulsorily required for high demanding applications such as high pressure composite vessels. For these reasons, 3B’s HiPer-tex™ glass is recognized as the global benchmark product when it deals with manufacturing of fully glass wrapped CNG composite cylinders that meet the most stringent standards, UN R110 or NGV2-2007. H2020 made composites display high static properties such as strength and modulus as well as outstanding inter-fibre and interlaminar strengths that translate into unprecedented level of fatigue performances on the final composite. For these reasons H2020 Direct Roving is the roving of choice for the manufacturing of fully glass wrapped Type 3 and Type 4 CNG cylinders. FEATURES BENEFITS High Mechanical Performance Glass Enables manufacturing of Types 3 & 4 CNG cylinders without use of carbon fibres Boron-free glass High corrosion resistance Epoxies compatible Improved transverse and interlaminar shear strengths High fatigue performances Medium strand integrity High productivity and quality in Filament Winding operations Globally available Get flexibility in manufacturing the highest quality wherever you are www.3B-fibreglass.com Product Description 3B’s H2020 Direct Roving is made of HiPer-tex™ glass and consists of continuous filaments bonded into a single strand and wound onto a bob- bin shape. H2020 Direct Roving is specifically designed for the produc- tion of vessels by Filament Winding technologies. H2020 Direct Roving features the second to none specific epoxy compatible sizing newly deve- loped by 3B that ensures enhanced epoxy-to-glass bonding. HiPer-tex™ is a trademark of 3B-the fibreglass company for types 3 & 4 glass-epoxy cylinders HiPer-tex™ glass

Transcript of sheet data - 3.imimg.com · UN R110 or NGV2-2007. H2020 made composites display high static...

Designed for Epoxy Filament

Wound High Pressure Vessels

dat

a she

et

HiPer-texTM H2020 Roving

HiPer-tex™ glass is a High

Performance glass produced by 3B

the fibreglass company. It is classified

as high strength, high modulus

R-Glass, by ASTM C-162, DIN 1259

and ISO 2078 standards.

HiPer-tex™ glass displays outstanding

mechanical properties that translate

into 10% higher stiffness and 30%

higher strength than conventional

glass fibres.

HiPer-tex™ glass is also a boron-

free glass that presents significant

improved corrosion resistance

over a wide range of aggressive

environments, including automotive

battery acid.

3B’s HiPer-tex™ glass is produced

with the latest and newest State

of the Art glass manufacturing

technology. Not only this technology

displays the highest energy efficiency

for the lowest environmental impact

but it also enables production of

glass featuring the highest level of

consistency compulsorily required for

high demanding applications such as

high pressure composite vessels.

For these reasons, 3B’s HiPer-tex™

glass is recognized as the global

benchmark product when it deals with

manufacturing of fully glass wrapped

CNG composite cylinders that meet

the most stringent standards,

UN R110 or NGV2-2007.

H2020 made composites display high static properties such as strength and modulus as well as outstanding inter-fibre and interlaminar strengths that translate into unprecedented level of fatigue performances on the final composite. For these reasons H2020 Direct Roving is the roving of choice for the manufacturing of fully glass wrapped Type 3 and Type 4 CNG cylinders.

FEATURES BENEFITS

High Mechanical Performance Glass Enables manufacturing of Types 3 & 4

CNG cylinders without use of carbon

fibres

Boron-free glass High corrosion resistance

Epoxies compatible Improved transverse and interlaminar

shear strengths

High fatigue performances

Medium strand integrity High productivity and quality in Filament Winding operations

Globally available Get flexibility in manufacturing the

highest quality wherever you are www.3B-fibreglass.com

Product Description

3B’s H2020 Direct Roving is made of HiPer-tex™ glass and consists of continuous filaments bonded into a single strand and wound onto a bob-bin shape. H2020 Direct Roving is specifically designed for the produc-tion of vessels by Filament Winding technologies. H2020 Direct Roving features the second to none specific epoxy compatible sizing newly deve-loped by 3B that ensures enhanced epoxy-to-glass bonding.

HiPer-tex™ is a trademark of 3B-the fibreglass company

for types 3 & 4 glass-epoxy cylinders

HiPer-tex™ glass

HiPer-texTM H2020 Roving

PACKAGING

PRODUCT PORTFOLIO & GENERAL PROPERTIES (PLEASE CONTACT US FOR ADDITIONAL INFORMATION)

STORAGE AND USAGE CONDITIONS

Disclaimer of Liability This data is offered solely as a guide in the selection of a reinforcement. The information contai-ned in this publication is based on actual laboratory data and/or fi eld test experience. We believe this information to be reliable, but do not guarantee its applicability to the user’s process or assume any liability arising out of its use or performance. The user, by accepting the products and/

or services described herein, agrees to be responsible for thoroughly testing any application to determine its suita-bility before committing to production. It is important for the user to determine the properties of its own commercial compounds when using this or any other reinforcement.

BECAUSE OF NUMEROUS FACTORS AFFECTING RESULTS, WE

MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLU-

DING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTI-

CULAR PURPOSE. STATEMENTS IN THIS DATA SHEET SHALL NOT

BE CONSTRUED AS REPRESENTATIONS OR WA RANTIES OR AS

INDUCEMENTS TO INFRINGE ANY PATENT OR VIOLATE ANY LAW,

SAFETY CODE OR INSURANCE REGULATION.

Bobbins are individually wrapped with stretched plastic

fi lm for protection, improved handling and to allow opti-

mum transfer from bobbin to bobbin. Nominal weight for

C bobbins is 25 kgs (55 lbs). Two pallet confi gurations are

available:

- Bulk Pack : standard packaging, consists of individual

bobbins

- Creel Pack : bobbins are connected together for conti-

nuous unwinding and no bobbins handling for operators.

For detailed information about bobbins, pallet weight,

dimensions and layout please contact us.

Storage in a cool and dry warehouse into the original

packaging is formally recommended. More precisely

ideal storage conditions are a temperature between 15°C

(59°F) and 35°C (95°F) and a relative humidity comprised

between 35% and 75%. If these conditions are maintai-

ned, the glass fi bre product should not undergo signifi -

cant changes when stored for extended periods of time. It

is also strongly recommended to condition it in the

workshop for at least 24 hours before use to prevent

condensation. For an optimal processing it is recom-

mended to use the product in ambient conditions 20°C-

23°C (68°F-73°F) and a relative humidity of 60%-65%.

dat

a she

et

Customer Service IndiaSurvey No 220,Village ColvaleTaluka, Bardez, Goa-403 513, IndiaP. +91 832-2299147 / +91 832-2299151F. +91 832-2299 887E. info@binaniglassfi bre.com

Customer Service Offi ceIldefonse Vandammestraat 5-7B-1560 Hoeilaart, BelgiumP. +32 2 402 2000F. +32 2 402 2002E. 3B.info@3b-fi breglass.com

for types 3 & 4 glass-epoxy cylinders

Product name Filament diameter Linear density Bobbin type Packaging

μm tex yield

H2020 17 1200 413 C see below

H2020 17 2400 207 C see below

Fibre properties Test method Value

Density 2.58

CLTE ASTM D696 4.1.10-6°K-1

Tensile Strength ASTM D2343-08 2 700-2 900 MPa 391-420 ksi

Tensile Modulus ASTM D2343-08 89 GPa 12 910 ksi

Tensile Strain ASTM D2343-08 3.1 - 3.3 %

Uni-directional composite properties Test method Value

Long. Tensile Strength (60% Vf) ISO 527-5 1 420 MPa 206 ksi

Long. Tensile Modulus (60% Vf) ISO 527-5 55 GPa 7 977 ksi

Transv. Tensile Strength (60% Wf) ISO 527-5 55 MPa 7 980 psi

ILSS (60% Wf) ISO 14130 74 MPa 10 730 psi