SHDC Series (Hydraulic 4-post 2-stage Type) - k-toko.com · TOKO has adopted LS (limit switch) and...
Transcript of SHDC Series (Hydraulic 4-post 2-stage Type) - k-toko.com · TOKO has adopted LS (limit switch) and...
![Page 1: SHDC Series (Hydraulic 4-post 2-stage Type) - k-toko.com · TOKO has adopted LS (limit switch) and PS (pressure switch). LS punching allows you to adjust the lower limit, so the punching](https://reader035.fdocuments.us/reader035/viewer/2022081606/5ce970fa88c99308268d2b50/html5/thumbnails/1.jpg)
SHDC Series (Hydraulic 4-post 2-stage Type)
Cutting FoodContainers
Wrapping/PackagingMaterials
Highly-functionalFilm
Carpet/BuildingMaterials
NonwovenFabric/Filters
Paper/Stickers Rubber/Packing SuperFiber/Apparel
Medical
Product Image
![Page 2: SHDC Series (Hydraulic 4-post 2-stage Type) - k-toko.com · TOKO has adopted LS (limit switch) and PS (pressure switch). LS punching allows you to adjust the lower limit, so the punching](https://reader035.fdocuments.us/reader035/viewer/2022081606/5ce970fa88c99308268d2b50/html5/thumbnails/2.jpg)
Example System
Main Specifications
![Page 3: SHDC Series (Hydraulic 4-post 2-stage Type) - k-toko.com · TOKO has adopted LS (limit switch) and PS (pressure switch). LS punching allows you to adjust the lower limit, so the punching](https://reader035.fdocuments.us/reader035/viewer/2022081606/5ce970fa88c99308268d2b50/html5/thumbnails/3.jpg)
Width
Depth
TOKO can choose the machine that suits the customer’s needs.
MIN600mm – MAX3500mm
MIN600mm – MAX3500mm
* Can be manufactured in increments of 100mm.
Main Specifications
![Page 4: SHDC Series (Hydraulic 4-post 2-stage Type) - k-toko.com · TOKO has adopted LS (limit switch) and PS (pressure switch). LS punching allows you to adjust the lower limit, so the punching](https://reader035.fdocuments.us/reader035/viewer/2022081606/5ce970fa88c99308268d2b50/html5/thumbnails/4.jpg)
The table is mobile. (Material/mold is placed on the table and cut.)
TOKO has adopted LS (limit switch) and PS (pressure switch). LS punching allows you to adjust the lower limit, so the punching height can be easily set. PS punching allows for the punching accuracy to be constant by placing the platen on parallel blocks(4 points) that are part of the machine body and using the mechanical end for cutting.
Since we can also make appointments for meetings upon request, please feel free to contact us.
Tonnage50TON■
75TON■
100TON■
120TON■
150TON■
200TON■
250TON■
300TON■
Cutting Method
OptionsSheet Feeding Roller■
Post-cutting Product-moving Device■
Material Supplying Device■
Mat Transfer Device (board moves every 1 shot)■
Electric Parallel Blocks (damper device that can store 0.01mm settings)■
CCD Camera Alignment Device■
Various Front and Rear Lines■
Inline Support Available for User’s Facilities■
Inquiries