SGS GULF LIMITED, NAI 003, Type A Inspection Body, (ISO ...€¦ · GAFTA Weighing Rules 123...

SGS GULF LIMITED, NAI 003, Type A Inspection Body, (ISO/IEC 17020:2012)

SGS Gulf Limited, P.O.Box 18556, Jebel Ali Free Zone , Dubai , UAE

Issue Date: 29-04-2020 Expiry Date: 28-04-2023 Issue No: 8

Inspection performed at/from the locations specified below

Location Address Location Code

Location Address Location code

SGS Gulf Limited, P.O. Box: 18556, Jebel Ali Free Zone, Dubai, UAE

A SGS Gulf Limited, Bin Sagar Tower, 204, 2nd Floor, Najda Street, Abu Dhabi, UAE

B

SGS Gulf Limited, P.O. Box: 4836, Fujairah Port, Fujairah, UAE

C

Inspection Category/ Field

Items/ Material/ Product Type/ Range of Inspection Inspection Criteria/ Methods/

Procedures Location

code

ACF 11-22; rev.3 ; of 17 ENAS Program Manager: AA

Department: Agriculture, Food and Life

Quantity Inspection

Agricultural Products: Grains and Beans, Oils And

Liquids such as Vegetable oil, Sunflower oil, Palm oil, Seeds and Crops, Soft foods such as Sugar, tea. Fresh Fruits and

vegetables

Quantity check Tally, Weighing supervision Draft Survey Ullage

Sampling method: ANSIASQ Z1.4:2008 GAFTA Weighing Rules 123 SGS-INSP-UAE-A and M-SOP-07-Rev 0 Weight Control Procedure Ullage: FOSFA Code of Practice for member superintends - Part one (Oils and Fats): 2017 SOP-03-Tally Inspection Procedure SGS Global Draft Survey Manual & SOP-02- Draft Survey procedure

A

Loading & Discharge Inspection

All above mentioned Agricultural

products

Loading Discharge Supervision and Sealing vessel and container

SGS-INSP-UAE-A and M-SOP-01-Rev 0 Container Loading Discharge Supervision Procedure M-SOP-04-Rev 0 Vessel Loading Discharge Supervision Procedure

A

Quality Inspection

Agricultural Products: Grains and Beans, Oils And

Liquids such as Vegetable oil, Sunflower oil, Palm oil.

Seeds and Crops, Soft foods such as Sugar, tea, Fresh Fruits

and vegetables

Visual Quality Inspections Packing, Marking and Dimensional check

SGS-INSP-UAE-A and Sampling method: ANSIASQ Z1.4:2008 M-SOP-05-Rev 0 Visual Inspection Procedure M-SOP-06-Rev 0 Visual Inspection Procedure for containers

A

Quality Inspection All above mentioned Agricultural products

Witnessing of third party analysis

SGS-INSP-UAE-A and M-SOP-08-Rev 0 Witness Testing Analysis Procedure

A









B


C



Procedures Location

code


Quality Inspection All above mentioned Agriculture products

Sampling and sample preparation General

SGS-INSP-UAE-A and M-SOP-09-Rev 0 General sampling

A

Quality Inspection

Cotton Oil and Fats

Grains and feeds Sugar Tea

Sampling and sample preparation

SGS-INSP-UAE-A and M-SOP-10-Rev 0 Sampling of Cotton SOP-11-Rev 0 Sampling as per FOSFA ISO 5555:2001 ISO 542:1990 Oilseed sampling as per FOSFA SOP-12-Rev 0 Sampling as per GAFTA; GAFTA sampling rules 124, RSA / 2019 The Refined Sugar Association; SAL / 2019 The Sugar Association of London; SOP-13-Rev 0 Sampling of Sugar IS3611-1975 Methods of sampling for Tea SOP-18-Rev 0

A

Department: Minerals

Quantity Inspection

Mineral Products Building Materials and

Aggregates, Energy Materials And Minerals, Fertilizer And Dry Chemicals, Non-Ferrous

Metals and Minerals, Steel and Steel making raw materials

Industrial Minerals

Quantity check Tally, Weighing supervision Draft Survey

Sampling method: ANSIASQ Z1.4:2008 SGS-INSP-UAE-A and M-SOP-07-Rev 0 Weight Control Procedure SOP-03-Rev 0 Tally Inspection Procedure SGS Global Draft Survey Manual SOP-02- Draft Survey Procedure

A









B


C



Procedures Location

code


Quality Inspection All above mentioned Mineral

products

Visual Quality Inspections Packing, Marking and Dimensional check

SGS-INSP-UAE-A and M-SOP-05-Rev 0 Visual Inspection Procedure. SOP-06-Rev 0 Visual Inspection Procedure for containers. ANSIASQ Z1.4 2008. The American Rust Standard Guide – (ARSG - for steel products)

A

Loading Discharge inspection

All above mentioned Mineral products

Loading Discharge Supervision and Sealing vessel and container

SGS-INSP-UAE-A and M-SOP-01-Rev 0 Container Loading Discharge Supervision Procedure, M-SOP-04-Rev 0 Vessel Loading Discharge Supervision Procedure

A

Quality Inspection All above mentioned Mineral

products Witnessing of third party analysis

SGS-INSP-UAE-A and M-SOP-08-Rev 0 Witness Testing Analysis Procedure

A

Quality Inspection All above mentioned

Mineral products

Sampling and sample preparation General

SGS-INSP-UAE-A and M-SOP-09-Rev 0 General sampling

A









B


C



Procedures Location

code


Quality Inspection

Ferro Alloys Dolomite

Limestone Iron Ores

Cement, Clinker, GGBFS Steel Products

Fertilizers

Sampling and sample preparation

SGS-INSP-UAE-A and M- SOP-14-Rev 0 ISO 3713:1987 Sampling and Preparation of

Samples General Rules

ISO 4551:1987 Sampling and Sieve Analysis

ISO 4552-1and 2:1987

Sampling and Sample

Preparation for Chemical

Analysis,

SOP-15-Rev 0 Sampling of Dolomite Limestone,

ISO 3081:1973 Iron Ores

Increment sampling

IS 2109:1982 Methods of

sampling Dolomite, Limestone

and other allied materials

BS EN 196-7:2007;

SOP-16-Rev 0

Sampling of Cement Clinker.

M-SOP-17-Rev 0

Sampling of Steel Products

Cargo inspector guide for

fertilizers,

AOAC International / 20th edition 2016

A









B


C



Procedures Location

code


Department: Consumer and Retail (CRS)

Consumer and Retail

Soft line -Textile items, bags, packaging materials and

garment accessories, Food Items such as Frozen

Food, Canned Food, Food Beverages

Visual Quality Inspections Quantity Packaging Marking Check Dimension specification check Container Loading Unloading Supervision and Container Sealing, Country of Origin Check

ANSIASQ Z1.4 2008; Procedures: P-CORP-I-04, P-CORP-I-05, P-CORP-I-06, P-CORP-I-07, P-CORP-I-09, SGS-DXB-CRS-INSP-P01.

A

Consumer and Retail

Electrical and Electronics- Audio and Video products, Home electrical, Kitchen

Electricals, Lamps, Computer items and Communication

Devices


ANSIASQ Z1.4 2008, Procedures: P-CORP-I-04, P-CORP-I-05, P-CORP-I-06, P-CORP-I-07, P-CORP-I-09, SGS-DXB-CRS-INSP-P01

A









B


C



Procedures Location

code


Consumer and Retail

Hard line Furniture, Bathroom

accessories, Stationary, Glassware, PPE items, Plastic

Containers, Hand tools, Building Hardware, Power

tools Kitchenware and tableware


ANSIASQ Z1.4 2008, Procedures: P-CORP-I-04, P-CORP-I-05, P-CORP-I-06, P-CORP-I-07, P-CORP-I-09, SGS-DXB-CRS-INSP-P01

A

Organic Organic Inspection Organic Crop Production, Processed Organic Food, Organic Livestock

Checklist SGS-OFC-F-016 is based on Ministerial Resolution No.84,2012

UAE.S GSO CAC GL32 2008

CAC32 1999,

Emirates Organic Foods Certification Scheme (2012)

A









B


C



Procedures Location

code


Department: Industrial

Pre/Post Shipment Inspection-Mechanical

Industrial Machinery,

Construction Equipment,

Generators, pumps,

compressors, Steel Structure,

Steel

members, Skids

Pre Shipment inspection,

Third Party Inspection, Quantity

Dimension marking labeling,

Specification check, Packaging

Marking Check

Factory Assessment on the

basis of submitted documents

ANSI/ASQ Z1.4

AWS D 1.1, API 1104, API 608, API 603,

ASME Sec V, Sec IX, ASME B 31

API 510, API 650

P-INSP-12

procedures

SGS-INDVIP040DXB

INSMA40

SGSAP-INDIV-SOP-

002,003,004,005SGS-

INDIVP034DXB

A & B

Pressure Equipment Inspection

Line Pipe, Pipe Fittings, Valves

Pressure Vessels, Non-

pressurized vessels, Tanks

Pre Shipment inspection, Third

Party Inspection, Quantity

Dimension marking labeling,

Specification check, Packaging

Marking Check

Factory Assessment on the

basis of submitted documents

ANSI/ASQ Z1.4

AWS D 1.1, API 1104, API 608, API 603,

ASME Sec V, Sec IX, ASME B 31

API 510, API 650

P-INSP-12

procedures

SGS-INDVIP040DXB

INSMA40

SGSAP-INDIV-SOP-

002,003,004,005SGS-

INDIVP034DXB

B









B


C



Procedures Location

code


Department: Governments & Institutions (GIS)

Electrical and Electronics Products

House hold appliances (Iron, Kitchen machinery,

Heating liquids, Hobs, Ovens, Microwaves, Cooking

appliances household electro-thermic cooking appliances

(other than ovens) incl. Rice cookers, deep fryers,

warming plates, toasters, popcorn makers, roasters,

Water heaters, Refrigerators, Vending machines, Fans & Air

conditioners, Clothes Washing Machines, Dish-washing Machines and Similar Appliances, Clothes Drying Machines and Other Drying Appliances, Kitchen

appliances, Personal care/grooming appliances, Vacuum Cleaners, Water

Suction Appliances, Insect Killers, Automatic Doors,

Shampooers, Floor Treatment Machines

and Other Similar Cleaning Appliances

Pre-Shipment inspection, Quality, Quantity, weight check, Dimension specification check, Labelling/ Packaging Marking Check, Container Loading Supervision & Container Sealing, Sampling for testing

P3-GIS-01-IC: Inspection Coordination P3-GIS-02-IC: Inspection Performance and Reporting IVP Business Rules Section-7: Physical Inspection Inspector’s Manual Country Instructions

A









B


C



Procedures Location

code



Lighting Appliances (Ceiling lamps, wall mounted lamps, Luminaries and LEDs,

Luminaries, Fixtures and Lamp holders, Electric Lamps,

incandescent lamp holders whether separate

or forming part of luminaries and chandeliers,

incandescent, fluorescent, and discharge lamps, emergency

lighting, ballast for lamps, Flashlights)



A









B


C



Procedures Location

code



Audio Video / IT Appliances (Computers, printers, scanners, Tablets, laptops, storage and

communication devices, Televisions and TV Equipment Including Satellite Receivers,

Digital Receivers, TV Antennas and Boosters, LED, LCDs,

Video games, monitors, UPS, Gadgets, telephones, Cameras,

Visualizers, Projectors and Similar

Appliances and Combined Function Audio and/or Video Equipment, Mobile phones

Telephones, Modems, Intercoms, Video Door Phone

System and Similar Communication Equipment and

musical instruments)



A


Tools, Power tools and Gardening Products,

Generators, motor operated tools, Switchgears, Current

breakers



A









B


C



Procedures Location

code



General Electrical: Electrical instruments/tools/ machines and

equipment (office machines, retail

equipment, Circuit breaker, Currency verifier, Amplifiers, Luminaries, Transformers, laminate sheets made from

thermosetting resins, Banking equipment, Data and text

processing machines, Telecommunication network

infrastructure equipment, Alarm systems Cables:

PVC Cables, Fiber Cables, Plugs, Switches, Socket outlet,

extension cords



A

Agriculture and Food products

Food and foodstuff, Beverages and

Packaged food items, Feed, Bottled or canned

beverages, spirits.



A









B


C



Procedures Location

code


Consumer & Childcare products

Paper, Textiles, Clothing, footwear and accessories thereof,

Articles of wood, Ceramic and Glassware, furniture, watches, Baby Feeding bottles, Babies

Elastomeric Teats, Pacifiers and Soothers, Skin care, hair care, perfumes, Cosmetics and other

personal care products, Soothers, teethers, teats, strollers.


P3-GIS-01-IC: Inspection Coordination P3-GIS-02-IC: Inspection Performance and Reporting IVP Business Rules Section-7: Physical Inspection Inspector’s Manual

Country Instructions

A

Children Toys Toys



A

Machinery, Automotive and

mechanical products

Industrial Machinery and parts thereof, Transport Vehicles Motor

vehicles and parts thereof, Pressure devices and firefighting

equipment.



A

Chemical products

Detergents (including fabric softeners, fabric sanitizers), raw material, industrial chemicals, paint, Disinfectant /antiseptic

cleaners, other cleaners (bathroom/kitchen/floor/oven/gla

ss), biocides like sanitizers.



A









B


C



Procedures Location

code


Building Materials

Cement, Concrete, Steel, Adhesives, Sealants, mortar, binders, metals and its alloys, rods, Structural Steel, bars,

Floor / Wall Bricks, Tiles (Ceramic & porcelain), Carpet,

Base Metals and articles thereof , Metal articles of Iron or steel –

bars, rods, Water Fixtures, Sanitary Appliances, Hydraulic

Links, Insulation Materials, Gypsum, Marble, Limestone, Sand, Related Aggregates,

Welding and Soldering, Perlite, Glass in Construction



A

Lubricant

Automotive Lubricant products Engine oil (Petrol, diesel, 4T, 2T), Transmission Fluid (ATF, CVTF,

SHOU, UTTO), Gear Oil, Grease, Refrigeration oil, Hydraulic oil,

BRAKE Fluid, Automotive chemicals, Coolant



A

Food Contact materials

Materials (plastic, metals like stainless steel, alloys, paper,

rubber, silicone, ceramic, porcelain) and articles intended to be in contact with food, such as packaging and containers,

kitchen equipment, cutlery and dishes.



A









B


C



Procedures Location

code


Department: Environment, Health and Safety (EHS)

Environment Inspection (Dubai &

Abu Dhabi)/ Ambient Air

Ambient Air Nitrogen Dioxide NO2

Processing, Manufacturing and Services Related to any Industrial Sector

EN 13528-1:2002

A & B

Ambient Air Sulfur Dioxide SO2


EN 13528-2:2002

Ambient Air Ozone O3


EN 13528-3:2003

Ambient Air Carbon Monoxide CO


DIN EN 50543:2011-11

Ambient Air Total Suspended P articulate

TSP


USEPA Method 40 CFR part 50 App B:2006

Ambient Air Particulate Matter PM10


USEPA Method 40 CFR part 5 0 App J :2006

Ambient Air Lead Pb


USEPA Method 40 CFR part 5 0 App G:2006


Abu Dhabi)/ Indoor Air Quality

Indoor Air Quality Humidity & Temperature


ISO 7726:1998 A & B



Indoor Air Quality Volatile Organic Compounds

VOCs


EN ISO 16017-2:2003 A & B









B


C



Procedures Location

code




Indoor Air Quality Carbon Dioxide CO2 & Carbon Monoxide CO


DIN EN 50543:2011-11

A & B

Indoor Air Quality Hydrogen Sulfide H2S &

Ozone O3


EN 1441-2:2004

Indoor Air Quality Particulates


EN 61326-1:2013

Indoor Air Quality Formaldehyde


ISO 16000-4:2011


Abu Dhabi)/ Stack Emissions / Flu

Gas Emission Monitoring

Stack Emissions / Flu Gas Emission Monitoring

Nitric Oxide NO, Nitrogen Dioxide NO2


US EPA Method 7E:2016 US EPA CTM-034

A & B Stack Emissions / Flu Gas Emission Monitoring Sulphur Dioxide SO2

USEPA Method 6C:2016


Carbon Monoxide CO USEPA method 10A:2016





Oxygen O2


USEPA method 3A:2017

A & B Stack Emissions / Flu Gas Emission Monitoring Carbon Dioxide CO2

US EPA CTM-034:1999


Total Particulate Matter TPM US EPA Method 5:2019









B


C



Procedures Location

code






Particulate Matter PM10

Processing, Manufacturing and Services Related to any Industrial

Sector

US EPA Method 201A:2016

A & B Stack Emissions / Flu Gas

Emission Monitoring Stack Gas Moisture Content

US EPA Method 4:2016


Stack Sampling & Velocity Traverse






Stack Gas Velocity & Volumetric Flow Rate



A & B


Heavy Metals Antimony (Sb), Arsenic (As), Barium (Ba), Beryllium (Be), Chromium (Cr), Cobalt (Co), Cadmium (Cd), Copper (Cu), Lead (Pb), Manganese (Mn),

Mercury (Hg), Nickel (Ni), Phosphorous (P), Selenium

(Se), Silver (Ag), Thallium (Ti), Zinc (Zn)










B


C



Procedures Location

code






Volatile Organic Compounds


US EPA Method 18:2016 A & B

Environment Inspection (Dubai & Abu Dhabi)/ Noise

Monitoring

Noise Monitoring LAeq, LAmax, LAmin, LA10,

LA50, LA90


ISO 1996: 2012 A & B

Department: Oil, Gas and Chemicals (OGC)

Cargo Inspection of Natural Resources, Refined Products

from Crude, Petroleum and Petrochemical

product, Lubricating Oil, Gases and Bunker Fuel.

Natural Resources, Refined Products from Crude, Petroleum

and Petrochemical product, Lubricating Oil, Gases and

Bunker Fuel.

Import, export shipment inspection, ship to ship transfer of cargoes, custody transfer measurements, Quantity / Quality control of Oil, Gas and chemical industries at Refineries Terminals Floating storages and on Tankers.

Method and Procedure as per international

standards from American Petroleum Institute,

Energy Institute, Singapore standard council

and guidelines from TIC Council (Formerly

IFIA).

A & C

END

SGS GULF LIMITED, NAI 003, Type A Inspection Body, (ISO ...€¦ · GAFTA Weighing Rules 123...

Documents

Transcript of SGS GULF LIMITED, NAI 003, Type A Inspection Body, (ISO ...€¦ · GAFTA Weighing Rules 123...