SFS intec SDF2 for cladding panels to steel
-
Upload
peter-hamby -
Category
Technology
-
view
440 -
download
1
description
Transcript of SFS intec SDF2 for cladding panels to steel
Wobbel screw: SDF2
Application: to fix a "non-metallic" cladding panel on thin steel
GipsumFibercementGipsum-CementCalcium-SilicatHardwoodPlasticAluminium
Thickness 6 - 12 mm
0.75 - 1.25 mm steelor 2.5 mm aluminium
Item 1 Item 2
Existing solution: Wing type screw
Function of wing screws
The wings enlarge the hole in the soft material
Drill the steel and thread form into the steel
+ =
But: It only works if the wings are stronger than the first material and
weaker than the steel ! In thin steel they often do not break off but drill a large hole.
The wings break when they contact steel
Our challenge
We were looking for a high quality stainless steel fastener that works in every case
Can be used in thin steel Independent from material density, machine speed etc Nice aesthetical head which can be colour matched
Our solution: Wobbel screw SDF2
Function:
Function: it's wobbling around the excentric drill point
Function:
Function:
Function: the point drills the steel
Function:
Function: it clamps the two material properly together
Features
No problems with wings which are breaking too early (hole is not enlarged) or too late (no pull out load)
Easy installation of cladding panels High quality stainless steel fastener A2, AISI 304 Suitable for thin materials (0.75 - 1.25mm steel), so the structure
could be made in thinner steel to save money Suitable for soft materials (aluminium) For hard cladding panels (fibre cement etc) Competitive price
StatusEasy installation