Baker, W.E. (1973), Explosions in Air, University of Texas Press, Austin.Baylot, J.T. and Rickman, D.D. (2007), Uncertainties in blast loads on structures, Proceedings of ASCEStructures Congress.Bleakney, W., White, D. and Griffith, W. (1950), Measurements of diffraction of shock waves and resultingloading of structures, J. Appl. Mech. T-ASME, 17(4), 439-445.Borenstein, E. and Benaroya, H. (2009), Sensitivity analysis of blast loading parameters and their trends asuncertainty increases., J. Sound. Vib., 321(3-5), 762-785.Chock, J.M. and Kapania, R.K. (2001), Review of two methods for calculating explosive air blast, Shock. Vib.,33(2), 91-102.Florek, J. and Benaroya, H. (2005), Pulse-pressure loading effects on aviation and general engineeringstructures-review, J. Sound. Vib., 284(1-2), 421-453.Hyde, D. (1992), ConWep-Application of TM5-855-1, Structural Mechanics Division, Structures Laboratory,USAE Waterways Experiment Station, Vicksburg, MS.Johnson, G.R. and Cook, W.H. (1985), Fracture characteristics of three metals subjected to various strains, strainrates, temperatures and pressures, Eng. Fract. Mech., 21(1), 31-48.Kingery, C.N. and Bulmash, G. (1984), Airblast parameters from TNT spherical air burst and hemisphericalsurface burst, Tech. Rep. ARBRL-TR-02555, Armament Research and Development Center, BallisticResearch Laboratory, Aberdeen Proving Ground, MD.LS-DYNA (2007), LS-DYNA Keyword Users Manual, Version 971, Vols. 1-2, Livermore Software TechnologyCorporation, Livermore, CA.Randers-Pehrson, G. and Bannister, K.A. (1997), Airblast loading model for DYNA2D and DYNA3D, Tech. Rep.ARL-TR-1310, Army Research Laboratory, Aberdeen Proving Ground, MD.Santiago, J. and Bhattacharya, S. (1991), Sensitivity of plate response calculations to blast load definition,Compos. Struct., 40(2), 375-392