Seventh ISSS National Conference on MEMS, Smart Materials, Structures and Systems Seminar Complex, CUSAT, Kochi-682022

PROGRAMME SCHEDULE 23 September 2015

1000 hr Inauguration of Pre-conference Workshop

Workshop 1

Advances in Piezoelectric Materials and Sensors EXECUTIVE HALL

Workshop 2

Advances in MEMS & NEMS COMMITTEE HALL

No. Title & Presenter Time No. Title & Presenter Time

1 Piezoelectrics at different length scales and applications Prof. S B Krupanidhi, Materials Research Center, IISc, Bengaluru.

1015-1130 1 Improving the Performance of Capacitive Accelerometers using Mechanical Amplifiers Prof. GK Ananthasuresh, Indian Institute of Science, Bengaluru.

1015-1130

Tea 1130-1145 Tea 1130-1145

2 Science & Technology of Piezoceramic Actuators and Its Applications Dr. N. Raghu, Centre for Materials for Electronic Technology (C-MET), Thrissur, Kerala.

1145-1300 2 Development of MEMS based capacitive microaccelerometer based on change in area and gap approach Dr. R.K. Bhan, Solid State Physics Laboratory, DRDO, Delhi.

1145-1300

Lunch 1300-1400 Lunch 1300-1400

3 Growth and Characterisation of Epitaxial Perovskite Thin Films Prof. M.K. Jayaraj, Nanophotonic & Optoelectronic Devices Laboratory, Department of Physics, Cochin University of Science & Technology, Kochi.

1400-1515 3 MEMS Sensors Packaging and Qualification for Aerospace Systems Prof. M. M. Nayak, Centre for Nano Science and Engineering (CeNSE), IISc, Bangalore – 560012

1400-1515

4 Applications of piezoelectric transducers Dr. R. Ramesh, Naval Physical & Oceanographic Laboratory, Kochi.

1515-1615 4 Essentials Of Microwave Integrated Circuit Components Dr. S. Raghavan, Senior Professor, N.I.T., Trichy

1515-1615

Tea 1615-1630 Tea 1615-1630

1630-1900 hr ISSS Session

1630 hr Welcome by President, ISSS 1640 hr Awards Session (Technical Presentations by Winners of 2015 ISSS Awards) 1740 hr Special ceremony to honor distinguished members for their services to ISSS and the Society at large 1830 hr AGM Business Session (for ISSS Members Only)

PROGRAMME SCHEDULE 24 September 2015

0845-0930 Registration Auditorium

0930-1015 Inauguration Auditorium

1100-1130 High Tea

Plenary Session 1 AUDITORIUM

Chair: Prof. S B Krupanidhi, IISc, Bengaluru 1130-1215 Plenary

Lecture (PL 01) Study of Natural Transducers: A Must for Next Generation MEMS Devices Prof. Rudra Pratap, Centre for Nano Science and Engineering, Indian Institute of Science, Bangalore.

Auditorium

1215-1300 Plenary Lecture (PL 02)

Development of MEMS based capacitive microaccelerometer based on change in area and gap approach Dr. Rajinder Kumar Bhan, Solid State Physics Laboratory, DRDO, Timarpur, Delhi, India.

Auditorium

1300-1400 Lunch

Parallel Session 1A EXECUTIVE HALL

Chair: Prof. G K Ananthasuresh, IISc, Bengaluru

Parallel Session 1B COMMITTEE HALL

Chair: Prof. S Gopalakrishnan, IISc, Bengaluru

No. Title & Author Time No. Title & Author Time

IT 01 Invited Talk “Niche applications and systems thinking in MEMS” Dr. K Subramanian, CEO and Head of R&D, Powergear Ltd., MEPZ, Chennai.

1400-1430 IT 02 Invited Talk “Piezoelectric Thin Films for MEMS” Dr. V. Kumar, Director, Centre for Materials for Electronics Technology (C-MET), Thrissur, Kerala.

1400-1430

CP 101 Development and characterization of Polyvinylidene fluoride-polyaniline films for supercapacitor applications Jayanth Kumar S, Anjana Jain, CSIR - National Aerospace Laboratories Bangalore 560017

1430-1445 CP 107 Development of MEMS based capacitive micro-accelerometer based on change in area and gap approach R.K. Bhan, Shaveta, Imran, Ramjai Pal, Shankar Dutta, and Isha Yadav, Solid State Physics Laboratory, DRDO, Lucknow Road, Timarpur, Delhi.

1430-1445

CP 102 Modelling and development of contactless MEMS switch for nanosatellite application Neelima R Kolhare

a, Govt. College of Engineering,

Aurangabad.

1445-1500 CP 108 Development of high accurate, high sensitive chip thermistor probes Eva Ignatious, K.R Ranjith, M. N. Muralidharan, A.Seema, C-MET, Thrissur

1445-1500

CP 103 An overview of smart material exploration in texture recognition: Comparative analysis with contemporary techniques Himanshu Panday

a, Hanut Mathur

b, Mridula Singh

c,

1500-1515 CP 109 Finite element analysis and experimental studies on 1-3 piezocomposite transducers K. Sreelatha, T. K. Vinod Kumar and R. Ramesh, Naval Physical and Oceanographic Laboratory, Kochi

1500-1515

Bishakh Bhattacharyaa ,

a IIT Kanpur,

b Thapar

University, Patiala, c Madan Mohan Malaviya

University of Technology, Gorakhpur.

CP 104 Designing a Smart Controller for Induction Hardening Process Mohan K Misra

1, Bishakh Bhattacharya

1, Onkar Singh

2,

A.Chatterjee1,

1Deptt. of Mechanical Engineering, I I T

Kanpur, 2Deptt. of Mechanical Engineering, H B T I

Kanpur

1515-1530 CP 110 Indium gallium nitride based surface acoustic wave devices Arjun Shetty

a, Basanta Roul

b, Shruti Mukundan

b, Greeshma

Chandanb, Lokesh Mohan

b, K J Vinoy

a, S B Krupanidhi

b

a Electrical Communication Engineering, IISc, Bangalore,

b

Materials Research Centre, IISc, Bangalore 560012

1515-1530

CP 105 Smart scaffolds for bone regeneration Ankit Aggarwal, Uma Batra, Dept. of Materials and Metallurgical Engineering, PEC University of Technology, India 160012

1530-1545 CP 111 Magnetorheological fluid semi-active anti-vibration mount: design, fabrication and testing Reji John and Shiv Kumar , Naval Physical and Oceanographic Laboratory, Thrikkakara, Kochi

1530-1545

CP 106 Fabrication of micro coriolis flow meter R. M. Saravanan

a, M. Shanmugavalli

b, W. Christ Raj

a,

aDept. Mechanical Engineering, Trichy Engineering

College, Tiruchirappalli, b

Dept. Mechanical Engineering, Shri Angalamman College of Engineering, Tiruchirappalli,

c Dept. of EEE, Amrita School of

Engineering, Amritapuri

1545-1600 CP 112 Performance enhanced bolometric terahertz detectors based on V2O5 for 10 THz to 35 THz Sumesh M. A.

a, Beno T.

a, S. P. Karanth

a, G. M. Rao b, M.

Viswanathan a,

a Laboratory for Electro-Optics Systems, 1st

stage, Peenya Industrial Estate, Bengaluru, b Department of

Instrumentation and Applied Physics, Indian Institute of Science, Bengaluru.

1545-1600

1600-1615 Tea

Parallel Session 2A EXECUTIVE HALL

Chair: Dr. V Kumar, Director, C-MET, Thrissur

Parallel Session 2B COMMITTEE HALL

Chair: Prof. K Natarajan, MSRSAS, Bengaluru

No. Title & Author Time No. Title & Author Time

CP 113 Mechanical characterization of nickel micro-tensile specimen fabricated using uv-liga process Abhishek Ghiya, Jaising Pednekar, Rahul C. Purandare, Rahul Harshe Vivekanand Bhatt, Jayanta Gope, Ritesh Kumar , R & D Establishment (Engrs), DRDO, Pune

1615-1630 CP 120 Detection of longitudinal cracks in beam structures using electromechanical impedance and frequency analysis Bhabani Sankar Padhy, Laji C.A., D.Ezhilarasi National Institute of Technology, Thiruchirappalli

1615-1630

CP 114 X-RAY LIGA Facility at indus-2 synchrotron Radiation source V. P. Dhamgaye

a, N. Khantwal

a, B. S. Thakur

a, G. S.

Lodhab,

a Indus Synchrotrons Utilisation Division, Raja

Ramanna Centre for Advanced Technology, Indore, bHomi Bhabha National Institute at RRCAT, Indore.

1630-1645 CP 121 Multiphysics Analysis of Seebeck effect in Thermopile B G Sheeparamatti, Vanita Abbigeri, M C Aralimarad

Department of Electronics and Communication Engineering, Basaveshwar Engineering College, Bagalkot, Karnataka.

1630-1645

CP 115 A novel 3D MEMS Fabrication/Micro cutting facility by Thermal Actuated MEMS device

1645-1700 CP 122 Finite element model updating for damage detection and damping identification in composites using Dynamic

1645-1700

Prashant Kumar Pattnaika, Y.V.D Rao

b, Jatin Kashyap

b

a Dept. of EEE, BITS PILANI Hyderabad Campus,

Hyderabad , b Dept. of Mech. Eng., BITS PILANI

Hyderabad Campus, Hyderabad 500078

responses from laser scanning doppler vibrometer Sudhir Varanasi, Shree Ram Pandey, Rituparna Datta, Bishakh Bhattacharya, Department of Mechanical Engineering, Indian Institute of Technology Kanpur

CP 116 Study of wafer curvature in glass-silicon anodic bonding process Abha Panchal, Surender Kumar, A. Lakra, Shankar Dutta and Ramjay Pal, Solid State Physics Laboratory (DRDO), Lucknow Road, Timarpur, Delhi, India

1700-1715 CP 123 Design and Simulation of MEMS Capacitive PSA for Wide Range Pressure Measurement Kirankumar. B. B

#1, B. G. Sheeparamatti

#2, Veekshit. B.

Math#3

, #Department of ECE, Basaveshwar Engineering

College, Bagalkot, Karnataka, India

1700-1715

CP 117 SU-8 Waveguide grating based silicon Micromachined moems accelerometer M. Balasubramanian, U. Poornalakshmi, Somya Agarwal and Prasant Kumar Pattnaik, Department of Electrical and Electronic Engineering, BITS-Pilani, Hyderabad Campus, Hyderabad, India

1715-1730 CP 124 A novel design using coagulation therapy with coaxial antenna for the detection of hepatic cancer Sk. Mohammed Ali

a, Arpana Kumari Jha

a, Sakuntala

Mahapatraa, Avipsa S. Panda

a,

aNational MEMS Design

Centre, Dept.of ETC ,Trident Academy of Technology, Bhubaneswar

1715-1730

CP 118 Vibration transmissibility based identification of soft viscoelastic systems Anirudha A Kulkarni , Rupal Srivastava, Bishakh Bhattacharya, Department of Mechanical Engineering, Indian Institute of Technology Kanpur.

1730-1745 CP 125 Design and fabrication of amplification circuit with organIc field effect transistor Shiny Nair, M. Kathiresan, and V Natarajan Naval physical and Oceanographic Laboratory (DRDO), Kochi.

1730-1745

CP 119 Underwater Sound attenuation using acoustic metamaterial G. Suresh, V. Natarajan, A. Shanavas, Naval Physical & Oceanographic Laboratory (DRDO), Kochi

1745-1800 CP 126 Performance evaluation of thermally activated micro gripper: A simulation Study Arindam Sarkar, Madhurima Chattopadhyay, Department of Applied Electronics and Instrumentation Engineering, Heritage Institute of Technology, Kolkata-107

1745-1800

1800-2000 Cultural Programme 2000-2100 Dinner

PROGRAMME SCHEDULE 25 September 2015

Plenary Session 2

AUDITORIUM

Chair: Dr. Vijayaraju, PD (NPMASS), ADA

0930-1030 Plenary Lecture (PL 03)

Nano-Electro-Mechanical Transduction for Polymer MEMS/NEMS Devices Prof. V. Ramgopal Rao, Department of Electrical Engineering, IIT Bombay, Powai, Mumbai – 400076

Auditorium

Parallel Session 3A EXECUTIVE HALL

Chair: Prof. Rudra Pratap, IISc, Bengaluru

Parallel Session 3B COMMITTEE HALL

Chair: Dr. J Narayana Das, DRDO Raja Ramanna Fellow

No. Title & Author Time No. Title & Author Time

IT 03 Invited Talk “Nearfield acoustic Holography and Sonar” Dr. D D Ebenezer, Associate Director, Naval Physical & Oceanographic Laboratory (DRDO), Kochi

1030-1100 IT 04 Invited Talk “Magnetorheological Fluid and Devices” Dr Reji John, Scientist F, Naval Physical & Oceanographic Laboratory (DRDO), Kochi

1400-1430

Tea 1100-1115 Tea 1100-1115

CP 127 Modelling and simulation of 4-beam MEMS vector hydrophone for low frequency application Devendra Verma, Sanjeev Kumar, R.P Singh, and D.K Bhattacharya, Solid State Physics Laboratory, Timarpur, Delhi.

1115-1130 CP 135 Growth of PMN-PT single crystal by bottom cooling technique P. Ramesh Babu

1, Indranil Bhaumik

2 , S. Ganesamoorthy

3,

S. Kalainathan 1 , R. Bhatt

2, A. K. Karnal

2, V.Natrajan

4, and

P. K. Gupta2,

1Centre for Crystal Growth, School Advance

Sciences, VIT University, Vellore, Tamil Nadu, 2Crystal

Growth Laboratory, Laser Materials Development and Devices Division, RRCAT, Indore,

3X-ray Scattering and

Crystal Growth Section, CMPD, Material Science Group, IGCAR, Kalpakkam, Tamil Nadu,

4Naval Physical &

Oceanographic Laboratory, Kochi ,Kerala

1115-1130

CP 128 Design and simulation of various shapes of cantilever beam as a power generator application in piezoelectric energy harvesting system Ankita Gupta

a, Pinki Graak

a, Sarabjeet Kaur

a, Priya

Chhabraa, Arjun Shetty

b*, Dinesh Kumar

a,

a Department

of Electronics science, Kurukshetra university, kurukshetra,

b Electrical Communication Engineering,

Indian Institute of Science, Bangalore 560012

1130-1145 CP 136 Study of phase formation of PMN-PT bulk and thin film in the morphotropic phase boundary-Effect of excess PbO and bottom electrode. Pius Augustine*and M.S.Ramachandra Rao, Department of Physics, Nano Functional Material Technology Centre and Material Science Research Centre, Indian Institute of Technology Madras, Chennai-600036, India.

1130-1145

CP 129 Design and simulation of piezoelectric harvester for wireless sensor node (wsn) applications E Varadarajan

a, M Kathiresan

b and V Natarajan

b,

1145-1200 CP 137 Domain matched epitaxial growth of dielectric thin films by pulsed laser deposition P S Krishnaprasad, M K Jayaraj, Department of physics,

1145-1200

a Research & Innovation Centre, IITM-Research Park,

Chennai, b

Naval Physical and Oceanographic Laboratory, Cochin 682021

Cochin University of Science and Technology, Kochi-22, Department of Physics, M A College, Kothamangalam, Kerala

CP 130 MEMS based optical image stabilization S.B.Rudraswamy

a, Anushree A Bannadabhavi

b, Ashwin

Kumarb, Jayanth Bapu

b, Swathi Pai B

b,

a Dept. of ECE,

SJCE, Mysore,bDept. of ECE, SJCE, Mysore

1200-1215 CP 138 Design of a MEMS based piezoresistive ultrasonic Transducer for underwater applications Madhurima Chattopadhyay

a, Debjyoti Chowdhury

aDept. of Applied Electronics and Instrumentation

Engineering, Heritage Institute of Technology, Kolkata

1200-1215

CP 131 Flaw Detection using ultrasonic sensors Tony George, Swetha Rachel Sabu, Shilpa A V, Elizabeth Rufus, Zachariah C Alex,

School of Electronics

Engineering, Vellore Institute of Technology, Vellore 632014

1215-1230 CP 139 Dispersion and tape casting of crystallisable glass+ alumina based LTCC composition K. G. Vasanthakumari, G. Balasubramani, S. Susanth, N. Raghu, Centre for Materials for Electronics Technology (C-MET), Thrissur - 680581.

1215-1230

CP 132 Modelling and optimization of two layered micro-cantilever using genetic algorithm B G Sheeparamatti, Ajayakumar C Katageri, Vasundhra. S. k, Poornima. J, Khyata Basavajayanti, Shruti V Department of ECE, Basaveshwar Engineering College, Bagalkot, Karnataka, INDIA

1230-1245 CP 140 Synthesis and characterization of crystallisable glass + alumina for LTCC application G. Balasubramani, S. Susanth, K. G. Vasanthakumari,N. Raghu, Centre for Materials for Electronics Technology (C-MET), Thrissur-680581

1230-1245

CP 133 A novel structural design for high sensitivity MEMS Pressure sensors Nisanth.A, Suja.K.J, Rama Komaragiri, Department. of ECE, NIT Calicut, Kerala, India

1245-1300 CP 141 Fabrication of thermoelectric generator in low Temperature co-fired ceramic (LTCC) Sourabh Adhyapak, Shrikant Kulkarni, Vijaya Giramkar, Shany Joseph,Girish Phatak, C-MET, Pune

1245-1300

CP 134 Deflection analysis of multilayer pNEMS cantilevers using simple polynomials Pavithra M and Muruganand S, Department of Electronics and Instrumentation, Bharathiar University, Coimbatore.

1300-1315 CP 142 Quantification of polarization direction in ferroelectric PbZrxTi1-xO3 thin films Martando Rath and M.S.Ramachandra Rao, Department of Physics, Nano Functional Materials Technology Centre and Materials Science Research Centre, IIT Madras, Chennai, India-600 036

1300-1315

1315-1400 Lunch

Parallel Session 4A EXECUTIVE HALL

Chair: Dr. R.K. Bhan, Scientist G, SSPL, Delhi

Parallel Session 4B COMMITTEE HALL

Chair: Prof. V Ramgopal Rao, IIT Bombay No. Title & Author Time No. Title & Author Time

IT 05 Invited Talk “THz Detectors” Dr. Sumesh M. A., Senior Principal Scientist, Laboratory for Electro-Optics Systems, Bangalore

1400-1430 IT 06 Invited Talk “Temperature dependent electrical fatigue studies on bulk piezoceramics” Dr. A. Arockiarajan, Associate Professor, Dept. of Applied Mechanics, IIT Madras, Chennai – 600036

1400-1430

CP 143 An investigation on effects of variable DC gap and Materials used on resonant frequency in MEMS EVA Tunable filters Linsa M L, Resmi R, Dept of ECE, LBS Institute of technology for Women, Thiruvananthapuram

1430-1445 CP 149 Detection of low velocity impacts on composite Plates using strain sensors P Sakthi Sathya, S R Viswamurthy, M J Augustin, Nitesh Gupta and Ramesh Sundaram, Advanced Composites Division, CSIR - National Aerospace Laboratories, Bangalore 560017

1430-1445

CP 144 Investigations on effects of variable air gap and beam thickness on reliability of cantilever MEMS switch Arathy U. S, Resmi R, Dept. of ECE, LBS Institute of Technology for Women, Trivandrum

1445-1500 CP 150 Performance comparison of impact event localization algorithms using FBG sensors for CFRP structures A Datta, MJ Augustin, N Gupta, SR Viswamurthy, Kaushik N, Pitchai P, G Kotresh and R Sundaram, National Aerospace Laboratories, Bangalore.

1445-1500

CP 145 Analysis of the effect of substrate thickness in RF MEMS tunable transformation filters Aswathy R P, Resmi R, Dept of ECE, LBS Institute of technology for Women, Thiruvananthapuram

1500-1515 CP 151 Mode 1 interlaminar fracture toughness of hybrid composites with nanosilica Anoop Anand, Narendhara Kumar, Rahul Harshe, Makarand Joshi Composites Research Center, R&DE (Engineers), DRDO, Pune.

1500-1515

CP 146 Novel Comb-Drive Actuator for Efficient Electrostatic Switching B G Sheeparamatti, Prashant D. Hanasi, Department of Electronics and Communication Engineering, Basaveshwar Engineering College, Bagalkot, Karnataka.

1515-1530 CP 152 Determination of curing profile of polymer resins by miniatured interdigital capacitor sensor K.A.Thomas, Shiny Nair, Shanavas.A , Reji John, V.Natarajan,Naval Physical & Oceanographic Laboratory, Kochi 682021

1515-1530

CP 147 Miniaturized lowpass filter (LPF) for ISM band application S. Kanthamani, K. Sophiya Thiagarajar College of Engineering, Madurai 625015

1530-1545 CP 153 Mathematical modelling and numerical analysis for investigating the self sensing capabilities of a piezopatch in a composite laminate G Gupta

1, Ayush Jain

2, B BhaƩacharya

3, Department of

Mechanical Engineering, IIT Kanpur, Kanpur.

1530-1545

CP 148 Estimation of power handling limits of ohmic contact RF MEMS switches due to Joule heating M. S. Giridhar, Prasobhkumar P. P, A Jambhalikar, J. John, R. Islam, Vedaprakash K, M Viswanathan, Laboratory for Electro Optics Systems, Indian Space Research Organisation, Bangalore.

1545-1600 CP 154 Damage Detection in a Thin Aluminium Plate Using Lamb Wave Based Time Reversibility Technique Nitesh P. Yelve, Suvarna Rode, Fr. C. Rodrigues Institute of Technology, Sector 9A, Vashi, Navi Mumbai, 400703

1545-1600

1600-1615 Tea 1615-1700 Valedictory function