Setting VC 4 and VC 12
14
Setting VC 4 and VC 12 For Open X-Debugger and click at “Create”.
Transcript of Setting VC 4 and VC 12
For slot 23 Click Traffic and control channel resources. Set as shown. Make sure control channel
number is the same as set in NMS
STM- Choose GMX interface used
TU12 : (1,1,1,1) VC4:1,TUG structure:1,1,1 Inst:VC12 no.
Control channel default should be set 9.
Select GMX2-A (for slot 23)
VC 4:1 VC12 Inst = 1 Unit slot = 23
GMX interface parameter for STM-1 and VC4 interface: TIM AIS action must be disabled. At NMS TIM
AIS action also must disable.
Select at GMX2 (23) Port X (According which port used)
Set STM-X (According which STM used such as 1, 4, and 16) Uncheck here.
Select GMX2 (25) Port X (According which port used). In this case port 2.
Double click at yellow interface.
Set STM-X (According which STM used) Uncheck here