Setting Tools
-
Upload
nagarjun-singh -
Category
Documents
-
view
73 -
download
2
Transcript of Setting Tools
www.jetresearch.com • 8432 South I-35 West • Alvarado,Texas 76009-9775 • PHONE: 817-761-2000 •FAX: 817-783-5812
Plugs and Setting Tools
Jet Research Center offers a variety of field-proven, reliable plugs, setting tools, and associated equipment. Many of these products are in their first and second generation of development and have been improved to increase their efficiency and effectiveness. This section provides information concerning the following equipment:
Wireline Pressure Setting Tools• Elite Magna-Range Bridge Plug• Dump Bailers•
www.jetresearch.com • 8432 South I-35 West • Alvarado,Texas 76009-9775 • PHONE: 817-761-2000 •FAX: 817-783-5812
Jet Research Center’s Setting Tools feature top and bottom pistons to eliminate presetting of plugs, retainers, or packers. A slow burning power charge allows positive setting with less shock stress. These tools are easily maintained and have self-bleeding capabilities. In addition, “Long-Stroke” Wireline Pressure Setting Tools feature increased stroke length to enable the setting of casing patches, long travel bridge plugs, and any tool requiring more than normal stroke and tension than standard conventional pressure setting tools. Their features are the same as the standard tools except for the addition of a second working piston.
Wireline Pressure Setting Tools
www.jetresearch.com • 8432 South I-35 West • Alvarado,Texas 76009-9775 • PHONE: 817-761-2000 •FAX: 817-783-5812
Specifications: Pressure rating: 20,000 psi• Temperature rating: 400°F• Shear force: 15,000 lb• Maximum stroke: 10.07 in.•
Reference Objects:Redress Kit: 101794905• RED Igniter: 101320910• Firing Head Adapter, RED Igniter: 101293376 •
Ref. Part No Description
A 101974677 Setting Tool Assembly, 1 11/16 Long Stroke, Self Bleeder
B 100013383 Assembly Hi-Pressure Firing Adapter
B001 100001949 O-Ring ( 2 Required, 90 Duro) B002 100113859 O-Ring ( 2 Required, 90 Duro)
1 100013382 Top Sub, 1 11/16 OD High Pressure, Multi-Stage Setting Tool
2 100142984 Cylinder, Powder Chamber3 100142981 Bottom Sub, Powder Chamber
4 100142976 Sub, Orifice, 1 11/16 MSST Self Bleeder
5 100142977 Cylinder, Upper,1 11/16 MSST Self Bleeder
6 100142980 Working Piston7 100142982 Tandem Sub
8 100142975 Bottom Cylinder, 1 11/16 OD High Pressure Multi-Stage Settting Tool
9 100142974 Bottom Piston, 1 11/16 OD High Pressure Multi-Stage Setting Tool
10 100142921 Lock Ring
11 100004226 Adapter, Sub (Special), 1 11/16 High Pressure Setting Tool
12 100142983 Release Ring, 25,000 lb ± 500 lb14 100113860 O-Ring (2 Required, 90 Duro)15 100113856 O-Ring (4 Required, 90 Duro) 16 100000162 O-Ring (14 Required, 90 Duro)
17 100013369 Fastener, Compression (Plastiglide 138NN7671)
18 100004219Shear Pin, 1 3/8, 1 11/16, 1.70 and 2 1/8 in. OD Self Bleeder Setting Tool - 737 lb
19 494028 Power Charge, High Temperature20 100004220 Fuze Assembly
1 11/16" Long Stroke Self-Bleeder Setting Tool
1 11/16" O.D. Long Stroke Self-Bleeder Setting Tool
1 11/16" Long Stroke Self-Bleeder Setting Tool
3
16
2
1
2x
16 2x
15 2x
18
4
16
17
6
5
16 3x
16 2x
7
16 2x89
16 2x
10
12
11
142x
152x
19
B001
B002
B
A
20
www.jetresearch.com • 8432 South I-35 West • Alvarado,Texas 76009-9775 • PHONE: 817-761-2000 •FAX: 817-783-5812
2-1/2" O.D. "Shorty" Self-Bleeder Setting Tool
2-1/2" O.D. "Shorty" Self-Bleeder Setting Tool
11
2
3
1
4
5
7
8
9
10
12
13
15
17 18
19
14
6
11
11
11
11
oil
A
B
B001
B002
11
Ref. Part No Description
A 101965920 2 1/2 Inch, Shorty Self Bleeder-Setting Tool
B 100013383 Assembly Hi-Pressure Firing Head
B001 100001949 O-Ring ( 2 Required, 90 Duro) B002 100026838 O-Ring ( 2 Required, 90 Duro)
1 101001523 Firing Head Adapter2 101001522 Power Chamber3 100142944 Shear Sub4 100142943 Top Sub5 100142945 Top Piston 6 100142942 Top Cylinder, Self Bleeder7 100142950 Tandem Sub8 100142951 Bottom Cylinder
9 100142946 Bottom Piston, 2 1/2 OD Setting Tool
10 100142947 Lock Ring11 100000165 O-Ring (13 Required, 90 Duro) 12 100000159 O-Ring (2 Required, 90 Duro) 13 100013370 Shear Pin, 2210 Lbs 14 100010649 O-Ring (2 Required, 90 Duro) 15 100013369 Nylon Compression Plug18 494030 Power Charge, High Temperature
19 100004220 Fuze Assembly
2-1/2" O.D. "Shorty" Self-Bleeder Setting Tool
Specifications:
Pressure rating: 17,000 psi•
Temperature rating: 400°F•
Shear force: 35,000 lb•
Maximum stroke: 9.72 in.•
Reference Objects:
Redress Kit: 100013379•
RED Igniter: 101320910•
Firing Head Adapter, RED Igniter: 101293430•
www.jetresearch.com • 8432 South I-35 West • Alvarado,Texas 76009-9775 • PHONE: 817-761-2000 •FAX: 817-783-5812
Ref. Part No Description A 102018569 Setting Tool
1 100142916Nut, Lock, Adapter Rod 3 1/2 OD and 3 7/8 OD Setting Tool to Baker Tool No. 10 and No. 20
2 100013371 Bottom Piston 3 1/2 OD and 3 7/8 OD Setting Tool
3 100010655 O-Ring (11 Required, 90 Duro)4 101223305 Bottom Cylinder
5 101223307 Top Piston 3 1/2 OD and 3 7/8 OD Shorty Setting Tool
6 100113938 O-Ring (2 Required, 90 Duro)7 100142973 Top Cylinder
8 100013369 Fastener, Compression (Plastiglide 138NN7671)
9 101223306 Top Sub
10 100013370Shear Pin, 2 1/2, 2 3/4, 3 1/2, 3 7/8 and 3 1/4 in. OD Self Bleeder Setting Tool
11 101223308 Shear Sub12 100010648 O-Ring (2 Required, 90 Duro) 13 101007635 Power Chamber14 102052890 GO Style Firing Head Adapter15 100000169 O-Ring (1 Required, 90 Duro)
16 100142917Ring Lock, Adapter Rod, 3 1/2 OD and 3 7/8 OD Setting Tool to Baker Tool No. 10 and No. 20
17 494031 Power Charge High Temperature
18 100004220 Fuze Assembly High Temperature
19 100000168 O-Ring (2 Required, 90 Duro)
3-1/2" O.D. "Shorty" Self-Bleeder Setting Tool
Specifications:Pressure rating: 11,000 psi•
Temperature rating: 400°F•
Shear force: 57,400 lb•
Maximum stroke: 8.75 in.•
Reference Objects:Redress Kit: 100013381•
RED Igniter: 101320910•
Firing Head Adapter, RED Igniter: 101293591•
3-1/2" O.D. "Shorty" Self-Bleeder Setting Tool
3-1/2" O.D. "Shorty" Self-Bleeder Setting Tool
11
13
3
5
7
8
910
12
16
6
15
14
3
2x
4
3 2x
3 2x
3 2x
2
1
2x
2x
A
17
18
19
www.jetresearch.com • 8432 South I-35 West • Alvarado,Texas 76009-9775 • PHONE: 817-761-2000 •FAX: 817-783-5812
Elite Magna-Range Bridge Plug
The Elite Magna-Range Bridge Plug is a specialty plug designed to run through tubing or restricted pipe and set in the larger tubing or casing below the restricted interval. This capability saves considerable time and expense by eliminating the need to pull tubing to set a plug. Elite Magna-Range Plugs have many of the advanced design features of Elite cast-iron bridge plugs.
Features:Designed to pass through restrictions and set • below in tubing or casing with a larger ID than the restriction.For the same setting range, the running OD is • smaller than conventional bridge plugs.Can be set on wireline, tubing, or coiled tubing or • slickline using “explosive” setting tools or a DPU® downhole power unit.Single-piece slip design to reduce the chances of • premature setting. Slip OD is less than the plug body OD.Slips set securely in grade P-110 casing.• Winged cones guide the slips to evenly spaced • positions against the pipe.Rocker action steel backups, steel petals, and a • firm rubber backup support softer rubber sealing element.Ratchet lock-ring holds the dynamic setting force.• Elite Magna-Range Bridge Plugs come in 12 • different sizes with pipe setting IDs between 1.610 to 5.044 in.Viton seal elements are standard on the six Elite • Magna-Range Bridge Plugs between 1.406 and 2.281 in. OD.
Where the plug is required for life-of-well applications, or it is planned to perforate the zone next to the plug, the durability and strength of the plug can be increased by dumping 10 to 20 ft of cement on top of the plug once it has been set. Before running a job, it is essential to consider the size and proper selection of the bridge plug. The following factors should be considered:
Borehole temperature• Maximum differential pressure the plug will be • subjected to.
Elite Magna-Range Bridge Plug
1 Ratchet Lock-Ring
3 Winged Cones
4
5 Packing Element
6
2 One-Piece Case
Hardened Slips
One-Piece Case
Hardened Slips
Rocker Action
Backup
Borehole restrictions the plug and setting tool will • have to pass through.Actual casing or tubing size where the bridge plug • will have to seal.
www.jetresearch.com • 8432 South I-35 West • Alvarado,Texas 76009-9775 • PHONE: 817-761-2000 •FAX: 817-783-5812
Elite Magna-Range Bridge Plug
Elite Magna-Range Bridge Plug
Part No. Element Material
PlugMax OD
(in.)
Setting Range (in.) Shear
Stud
Setting EquipmentSetting Tool
Min Max Setting Sleeve
Adapter Rod
Setting Nut
100004214 Nitrile 1.406 1.610 1.9958,000
101223350
N/R
N/R
1 3/8 MSST 101974673
100013363 Viton 1.468 1.610 1.995 69673 1 1/2 Shorty 101973936
100013353 Viton 1.750 1.905 2.441
13,000
100142920 1 11/16 LSST 101974677
100009713 Viton 1.906 2.156 2.765 100142920 1 11/16 LSST 101974677
100013364 Viton 2.187 2.375 3.000100142922 1 11/16 LSST 101974677
120022112 2 1/8 MSST 101971445
100009714 Viton 2.281 2.441 3.343100142922 1 11/16 LSST 101974677
120022112 2 1/8 MSST 101971445
100013361 Nitrile 2.500 2.875 3.500
100142922 1 11/16 LSST 101974677
101223369 2 1/8 MSST 101971445
100142962 2 1/2 Shorty 101965920*
100071886 Nitrile2.750 3.187 3.920
25,600
101223293 2 1/8 MSST 101971445
352289 Viton 100142964 2 1/2 Shorty 101965920*
100013365 Nitrile3.000 3.437 4.154
101223293 2 1/8 MSST 101971445
352291 Viton 100142964 2 1/2 Shorty 101965920*
120009674 Nitrile3.250 3.920 4.276
29,200
100142949 100142949 2 1/2 Shorty 101965920
352292 Viton 101950701 101950702 3 1/4 MSST 101974644
100013362 Nitrile3.625 3.900 4.670
100162433 100142928 2 1/2 Shorty 101965920
352293 Viton 100013372 120042359 3 1/2 Shorty 101974666
120009675 Nitrile 4.062 4.154 5.044 33,400
100142963 100142961
100013375
2 1/2 Shorty 101965920
64687 646883 1/2 Shorty 101974666
3 7/8 Shorty 101922509
101950331 6.625 7.921 6.125 48,000 101950329 101950324 N/R 3 1/4 MSST 101974644
*WST will require the bottom piston to be replaced with 101985459.
www.jetresearch.com • 8432 South I-35 West • Alvarado,Texas 76009-9775 • PHONE: 817-761-2000 •FAX: 817-783-5812
Through Tubing Dump Bailers
Dump Bailers
See the Through Tubing Plugback Equipment Operation and Service Manual 100146437 for specialized mixing, pumping and bottom fill equipment not shown here.
Through Tubing Dump Bailers
Item Description 1 11/16-in. 2-in.1 Contact Sub Assy 100013316 1000133162 Boot - 1/16-in. Wire Hole 100004173 1000041733 Top Section - 10 ft 100118478 1000108714 Extension Section - 5 ft 100118479 100118480
Extension Section - 10 ft 100117089 1000808025 O-ring - 90 Duro #568 100113868 1012992676 Blast Sub 120021849 1001331577 Bailer Bottom - Collar 120131667 1001605608 Bottom Glass 100009853 1000099049 Detonator N/A N/A
10 Detonator Weight 100142990 10014299011 Grounding Spring 100000645 10000064512 Lead Wire 100115507 100115507
1
2
3
4
5
6
7
8
9
1011
12
5
www.jetresearch.com • 8432 South I-35 West • Alvarado,Texas 76009-9775 • PHONE: 817-761-2000 •FAX: 817-783-5812
Casing Dump Bailers
Dump Bailers
1
23
4
5
6
7
8
9
10
11
12
131415
9
17
9
16
Casing Dump Bailers
*Teflon is a trademark of E.I. Dupont De Nemours.
Item Description 3-in. 3 1/2-in. 4-in. 5-in.1 Electrical Contact 100004162 100004162 100004162 1000041622 Contact Retainer 100000615 100000615 100000615 1000006153 O-ring - 95 Duro #568 100000222 100000222 100000222 1000002224 Upper Spinning Collar Sub 100000442 100000442 100000442 1000004425 Upper Spinning Collar 101299220 100000443 100000443 1000004436 Boot - 1/16-in. Wire Hole 100004173 100004173 100004173 1000041737 Top Section - 10 ft 101299221 100000444 100118481 686058 Extension Section - 5 ft 101299223 100000445 100118482 68606
Extension Section - 10 ft 101299224 100000446 100118483 686079 O-ring - 95 Duro 100114816 100010700 10000234 10011485010 Blast Sub 101299225 100000447 100118484 6860811 Bailer Bottom - Glass Type 101299226 100000448 68609 6861012 Glass Disk 100010872 100000449 6841 684213 O-ring - 95 Duro 100000227 100000231 100000232 10000023614 Detonator N/A N/A N/A N/A15 Detonator Weight 100142990 100142990 100142990 10014299016 Grounding Device 100000664 100000664 100000664 10000066417 Lead Wire - 22 GA, *Teflon 100115507 100115507 100115507 10011550718 Seizing Line - High-temp. 69150 69150 69150 69150