SESC Profile 2016
-
Upload
christopher-perry -
Category
Documents
-
view
51 -
download
2
Transcript of SESC Profile 2016
Company Profile
Testing & Commissioning
Installation Works
Project Management
Commissioning Management
Introduction
With over five decades of exceptional delivery experience throughout the world SESC should be your first choice for any project. Our commitment to providing a quality service with exceptional delivery makes SESC one of the globes leading service providers for the construction industry.
At SESC we offer a comprehensive service, from MEP Installation to Hands on Commissioning, Commissioning Management, Verification/Rectification, Thermal Imaging, Testing of MEP Services and Project Management.
We operate across all business sectors including Retail, Leisure, Commercial, Health and Education.
SESC is by design, a value driven business where ownership and total commitment from all our employee’s is encouraged in order to create sustaina - ble and measurable growth, and added value for all of our client’s and stakeholders.
Key to our growing reputation has been the recruitment of people who are known in the industry for the excellence of their operational delivery. They are committed to adding value through innovation which is at the core of our abilty to deliver to time, cost and quality.
All SESC services are provided in accordance with CIBSE, ASHRAE and ANSI Commissioning Codes as applicable, as well as BSRIA, CSA, NEBB, IEE, and AABC Guidelines and relevant British Standards.
Index
Page 1 - Organisation Chart
Page 2 - Commissioning Management
Page 3 - Commissioning Management Diagramme
Page 4 - Commissioning Management Diagramme
Page 5 - Commissioning Management Diagramme Page 6 - Installation Works
Page 7 - Project Management
Page 8 - Mechanical Commissioning
Page 9 - Electrical Commissioning
Page 10 - Portable Appliance Testing
Page 11 - Thermal Imaging
Page 12 - Health & Safety
Page 14 - Audits & Reports
Page 15 - Project Sample
Page 18 - Pre-Qualification
Page 13 - Rectification
Page 17 - Contact
1
Organisation Chart
2
It is the role of the Commissioning Management Company to act in the best interest of the client, independent of the design, procurement and installation team’s, ensuring all building services are delivered to the required specification.
SESC provide independent Commissioning Managers, Engineers and Technicians who integrate into project teams to deliver safe building services and systems.
Commissioning Consulting Functions offered by SESC:
• Management & implementation of project specific integrated systems testing • Pre-commissioning/commissioning witnessing and validation of all building services &
systems • Co-ordination of client/statutory demonstrations • Deficiency and non conformance reporting • Record drawing review & validation • Test documentation collation • Production of monthly & final handover commissioning status reports • Commissionability appraisals • Commissioning plan production • Commissioning programme production and management • Production and management of commissioning activity schedule databases. • Co-ordination/review of site & service specific commissioning method statements • Mechanical submittal reviews • MEP installation monitoring and reporting • Factory Acceptance Testing
Commissioning Management
3
Processes - Commissioning Management
4
Processes - Commissioning Management
5
Processes - Commissioning Management
6
SESC provide a full installation service with packages of work covering all Mechanical, Electrical and Data Infrastructure installations. Supporting principal contractors with various size/scope projects. Our in-house specialists deliver on target programmes, within budget, on time and to the highest environmentally friendly standards. Our engineering teams have expertise in various sectors including commercial, retail, industrial, public sector, education, leisure and prestige hotel/residential. All aspects of mechanical and electrical work can be undertaken by our experienced team of engineers including, heating and cooling systems, air conditioning, ventilation, pipework, and lighting, including specialist lighting controls. SESC engineers ensure the highest levels of green business practices are utilised throughout the installation process..
Installation Works
Electrical snapshot: Our experienced staff install lighting and AV systems, including but not limited to installations such as theaters, museums, shopping centres, conference rooms, schools and colleges: 1 .Instalation of Automated Lighting Control Systems
.Home Automation System ( HAS ) 2
.LV and ELV Electrical Power Distribution 3 4 .Management of Access Control System 5 .Management of Video Surveillance System 6 .Management of Closed Circuit TV System (CCTV ) 7 .Management of Public Address System 8 .Management of Hotel Guest Room Management System
) 9 .Management of Building Management System ( BMS
Mechanical Snapshot: Our expert technicians provide services covering all aspects of HVAC system installations: 1 . Heating, Ventilation & Air-conditioning Services ( HVAC) 2 . Plumbing & Drainage System 3 . Mechanical Car Park Ventilation System 4 . Customised Maintenance Program/Facility Management (FM) Services
. 5 Staircase Pressurization System
7
Through effective project management SESC control and deliver construction projects to cost and on programme, minimising risk whilst maintaining a high level of safety, achieving quality and maximising returns on investment. Project management is a core service delivered by our integrated project management team. Our project management services cover the whole project, from inception to completion. We treat each project as unique and strive to maintain momentum and quality throughout. Our goal is always to drive project success by providing clients with visibility of cost, quality, programme, delivery, motivation and safety.
Snapshot of Services: • Quality Management • Project Planning • Design Reviews • Contract Administration • Programme Management
Project Management
8
(constant & variable flow)
SESC provide a total service for testing, adjusting, balancing and commissioning (TAB) of HVAC systems. These works are delivered with qualified Engineer’s who operate in accordance with CIBSE, BSRIA and ASHRAE codes of practice. Our Engineer’s adjust and balance system components to ensure compliance of design and compliance with owner operational requirements. In order to meet Testing and Balancing requires SESC operatives work closely with the Building Services Installation Contractor, identifying potential installation problems and recommending solutions . This pro-active approach reduces the potential down time for the client.
Snapshot of systems included in HVAC Testing and Balancing by SESC: • Low velocity air systems • Variable air volume systems • Specialist exhaust air systems • Staircase/lift/lobby pressurisation • Air handling units • Chilled water and LTHW systems
• Condenser water systems • AHU/coil performance tests • Heat exchanger performance tests • Sound level measurement • Environmental tests • Fan Coil Unit • Smoke extract fan • Toilet extract fan • kitchen extract fan
Mechanical Commissioning
9
All electrical wiring deteriorates with time, it is therefore absolutely essential to periodically test all electrical wiring to ensure it’s continued integrity and continued compliance along with the fixed appliances it supplies such as, but limited to: sockets, light fittings, main incoming LV supplies and mechanical plant such as air handling units and fan coil units. These works are delivered by qualified Engineer’s who all operate in accordance with DEWA, ADDC and Electrical Wiring and Installation 17th Edition codes of practice. SESC Services now include electrical - mechanical (MEP) installations. We also offer senior project managers to assist with the management of 3rd party installations SESC provide support to clients, contractors, designers, project managers and end users in areas including but not limited to Electrical Testing. We provide qualified electrical technicians who perform live testing of electrical services in compliance with IEE Regulations 17th Editions, including: • Main distribution boards • Sub main distribution boards • Motor control centres • Distribution boards • Contact Resistance testing • Current Injection Ground Resistance testing • Earth Fault Loop Impedance testing • ELCB - RCD testing • High Voltage Cable testing • Insulator Resistance testing
Electrical Commissioning
10
Portable Appliance Testing What is Portable Appliance Testing? Portable appliance testing (commonly known as “PAT”, “PAT Inspection” or “PAT Testing”) is a process by which electrical
appliances are routinely checked for safety. The correct term for the whole
process is “in-service inspection & testing of electrical equipment”.
Tests include: ·Earth Resistance Test ·Earth continuity test ·Insulation resistance test ·Polarity check ·Applied current (Class I, Class II, Class III)
Why do we perform Portable Appliance Testing? Most electrical fires, electrical shocks and nuisance tripping are caused by
faulty portable appliances, ie. Kettles, Micro-waves etc. Portable Appliance Testing identifies these problems and allows corrective
actions to be taken.
11
12
What is Thermal Image Testing?
Thermal Image inspection and monitoring of electrical installations identify faulty electrical components that begin to deteriorate as soon as they are installed. Whatever the loading of a circuit, vibration, fatigue and age cause the loosening of electrical connections, while environmental conditions can hasten their corroding. Briefly stated all electrical connections will, over time, follow a path towards failure. If not found and repaired then these failing connections will lead to faults. A loose or corroded connection increases resistance at the connection and this increased resistance causes an increase in heat. Electrical Thermal Imaging will detect this developing fault before it fails.
Why do we perform Thermal Image Testing?
Surveys of electrical systems expose faults such as poor connections, overloaded circuits and imbalanced load. Alternating current can loosen connections and can causes breakdowns and possibly electrical fires. Detecting and correcting failing connections before a fault occurs can prevent fires and the unplanned loss of electrical supplies, which in turn will prevent loss of revenue. Thermal Imaging provides a quick and efficient method of finding electrical and mechanical components that are operating above their correct temperature.
Thermal Imaging
13
Health & Safety SESC believe Health & Safety works best when it’s built into the project.
We believe every project is unique, therefor we create project specific preconstruction Health &
Safety plans and risk assessments to identify and eliminate any potential risks before they ever
appear on-site. Whatever your role, our focus is to guide you and your business through the MEP Health &
Safety process designed to improve the delivery, quality and effectiveness of health and safety
on your project. Snapshot of Health & Safety Services:
• Producing project specific health & safety plans • Risk assessments • Assistance in drafting method statements • Site safety inspections • Development of building manuals and health and safety files
14
SESC are increasingly being invited to undertake site surveys to determine the status of older installations, then rectify those works to ensure compliance with current regulations. The process begins with a detailed photographic survey. These photographs form the basis of a report that identifies works that require rectification. Once identified works can be rectified, retest and certified.
Rectification Process
15
Installations that are more than 3 years old should have a periodic inspection of all MEP services. Older installations are often found to have been incorrectly tested and commissioned by todays stringent standards, and as a result cause concern. For instance, fan coil units and transformer packs within lighting installations can become faulty and cause fire.
Audits & Reports
Audits & Reports by SESC include:
• All electrical and mechanical systems to be audited for compliance. • All drawings and load schedules verified against actual installation. • All fire detection, fire fighting systems and equipment checked to ensure they adhere to the
local DCD requirements. • All emergency systems functionally checked, including all emergency lighting and 3rd party
equipment. • All hazards found to be highlighted and rectified. • Air and water systems checked to ensure the desired flow rates are being achieved. • Reports will be created to highlight all faults inclusive of photographic evidence and
recomended remedial works. • All non-compliant installations will be rectified by qualified SESC Engineers
16
Project Sample
NAME CLIENT
Abu Dhabi Judiciary - Abu Dhabi Judiciary
Al - Ghurair Centre - Al Ghurair
AL KHAWANEEJ - AKINS
Al Safer-WTC - Al Khaja Group
Arabian Ranches 2 - Various
Bertin Restaurant- - SARAH Contracting LLC
Al Manara Dalma Mall -
Various
DIFC - G hospitality Group
Dubai Mall - EMAAR
Dubai Marina Mall - EMAAR
Ferrari World - ESFAHAN
Four Seasons Hotel - AFC
Funscape -
Funscape Golds Gym
- OTS Grand Cinema
- Vox Cinemas
NAME CLIENT
Shabat Plaza - Various
House of Fraser - ARCO
Hezza bin Zayed Stadium - Al Qattara Investments
Jimi Mall - ALDAR
LOUIS FERRAUD - Paris Group International
Me’ aisem City Centre Mall- Various
Remal Mall - ALDAR
SKS Hospital - SKS Hospital
Sky Tower -
Spencer Interiors LLC
Souk Al Bahar - Various
WILTON-WTC - AKINS
World Trade Centre Mall - Vindico
World Trade Centre Souk - Vindico
Yas Mall - ALDAR
Ritz Carlton Hotel - AFC
17
Registered Office: 1003 Al Attar Tower, Sheikh Zayed Road, Dubai, UAE, PO Box. 182481
Tel: +971 4 310 8000 Fax: +971 4 431 6884 Web: www.sescgroup.ae
New Enquirers email: [email protected]
Existing Clients email: [email protected]
Contact
18
Pre Qualifications SESC Engineers are fully qualified to provided services and expertise
in accordance with CIBSE, ASHRAE and ANSI Commissioning Codes
and practices, alongside BSRIA, CSA, NEBB, IEE, and AABC
Guidelines all in accordance with the highest levels of British
Standards.
Registered Office Details:
1003 Al Attar Tower, Sheikh Zayed Road, Dubai, UAE, PO Box. 182481 Tel: +971 4 310 8000 Fax: +971 4 431 6884 Web: www.sescgroup.ae ----------------------------------- Trade License: No. 693057 ----------------------------------- Insurance Details: We are insured with AIG-American Home Assurance Company Public Liability: Policy No. 2204188-3 Liability: AED 5,000,000 any one occurrence -----------------------------------
Employers Liability: Policy No. 2204188-4.2 Expiry Date: 25/08/2015 Liability: AED 4,000,000 --------------------------------------- Safety Record: We have had no reportable accidents since company established
19
Workmen’s Compensation Policy No. 2204188-4.1 -----------------------------------
20