Services - v5.ptpilot.comv5.ptpilot.com/LiteratureRequest/documents/Movi-C.pdf10 MOVIDRIVE®...
Transcript of Services - v5.ptpilot.comv5.ptpilot.com/LiteratureRequest/documents/Movi-C.pdf10 MOVIDRIVE®...
Drive Technology \ Drive Automation \ System Integration \ Services
NEW: MOVI-C®
Modular automation system
2 MOVI-C® – modular automation system
MOVI-C® is SEW-EURODRIVE’s all-in-one solution for automation control. Whether
you're implementing single-/multi-axis applications, complex motion control, or full
automation systems, MOVI-C® provides the control and flexibility you need.
SEW-EURODRIVE delivers automation components including drive technology,
electronic control components, and engineering software – all from a single source.
Plus, you get the reliability and quality you’ve come to expect from more than 85
years of engineering expertise.
NEW: MOVI-C® – Modular automation system
MOVI-C® combines:
— MOVISUITE® engineering software— MOVI-C® controllers— Inverter technology — Drive technology
3
4
MOVISUITE® is intuitive engineering software that sets a new standard for single
and multi-axis motion control. Project planning, startup, operation, and diagnostics
are quick and easy – saving you time and money.
MOVISUITE® – Engineering software
MOVISUITE®
5
Features of the MOVISUITE® standard
− Startup and parameter setting for MOVIDRIVE® frequency inverters − Easy to use for complex or simple applications− Interactive design for a short learning curve− Intuitive inverter functions like manual operation and startup of the
drive train − Configuration and IEC programming for MOVI-C® CONTROLLERs
− Parameter setting and diagnostics for MOVIKIT® modules − Data management − Project management − Network scan of connected units − Scope function − Electronic catalog for SEW-EURODRIVE products− Comprehensive context-sensitive help function
6 MOVI-C® CONTROLLER
The combination of the MOVI-C® CONTROLLER, the MOVIKIT® modules, and
MOVIRUN® software provides a flexible, easy to use platform that saves time and money.
MOVI-C® control technology is available in four different performance classes – power,
power eco, advanced and standard. Features include an intuitive user interface, plus
backup and restore functions that make axis replacement simple.
MOVI-C® CONTROLLER
7
Hardware Performance class MOVI-C® CONTROLLER standard
Performance class MOVI-C® CONTROLLER advanced
Performance class MOVI-C® CONTROLLER power eco
Performance classMOVI-C® CONTROLLER power
Features and equipment
− Centralized data management− Links to all standard control systems− High performance and user-friendly− Auto reload function for axis replacement− Startup – MOVIRUN® software platform modules for parameter setting and programming− Operation – MOVIKIT® modular software system includes function blocks for speed control,
positioning, robotics, electronic cam, and mechanically coupled axes − Routing from PROFIsafe to the axis modules− 1 x ETHERNET (10/100 BaseT) for engineering or TCP/IP and UDP using IEC 61131-3− 1 x EtherCAT® / SBusPLUS master
− 1 x CAN, non-isolated
− PROFINET slave, EtherNet/IPTM slave, Modbus TCP/IP slave
− Status display for PLC and fieldbus
− SD memory card− ≤ 2 interpolating axes− ≤ 6 auxiliary axes
− 2 x CAN, 1 electrically isolated
− 1 x RS485− PROFINET slave,
EtherNet/IPTM slave, Modbus TCP/IP slave
− Status display for PLC and fieldbus
− Optional – master module, can be added to MOVIDRIVE® modular
− SD memory card− ≤ 8 interpolating axes− ≤ 8 auxiliary axes
− PROFINET slave, EtherNet/IPTM slave, Modbus TCP/IP slave
− CFast memory card 2 GB− ≤ 16 interpolating axes− ≤ 16 auxiliary axes − PC-based
− PROFINET slave, EtherNet/IPTM slave, Modbus TCP/IP slave
− 7 x USB 2.0− CFast memory card 2 GB− ≤ 32 interpolating axes− ≤ 32 auxiliary axes− Optional – 2nd Windows
7 embedded operating system using Hypervisor technology for integrated visualization
− PC-based
8 MOVIRUN®, MOVIKIT®
Software MOVIRUN®
The software platform for MOVI-C® CONTROLLERs
MOVIKIT®
The modular software system for MOVI-C® CONTROLLERs
Features and equipment
Startup with MOVIRUN®
− Automation with MOVI-C® and third-party components− Interpolated operating modes for demanding motion
control applications− State-of-the-art programming system (IEC 61131)− Prefabricated software modules from the MOVIKIT®
modular software system can be integrated into the user program
Operation with MOVIKIT® for simple to complex motion control functions− Graphic configuration and diagnostics− Available for MOVIDRIVE® technology, MOVIRUN® smart
is available as a parameterizable solution with fieldbus connection, and MOVIRUN® flexible is available for integration in the IEC program with user-friendly IEC interface
Modules:− MOVIKIT® Velocity, Positioning− MOVIKIT® MultiMotion, MultiMotion Camming− MOVIKIT® MultiAxesController− MOVIKIT® Robotics
MOVIRUN® smart, the intelligent, parameterizable motion control platform− Parameter setting instead of programming− Prefabricated software modules from the MOVIKIT®
modular software system can be easily connected to higher-level controllers via fieldbus interface
− No additional programming work− Functionality documentation
Benefits − Advanced functionality with a user-friendly interface− Choose between parameter setting or programming− Parameter setting:
- Startup shortened by standardized software modules - Only parameters required for the application need to be entered - Guided parameter setting instead of complex programming
MOVIRUN® and MOVIKIT® – Control technology software Simple application control
9
MOVIKIT®
modular
software system
MACCammingGearing
10 MOVIDRIVE®
MOVIDRIVE® inverters control and monitor synchronous, asynchronous and
linear motors with or without an encoder. They are available as a modular multi-axis
system with single- and double-axis modules up to a rated current of 180 A, and as
a compact unit with mains connection up to a rated output of 315 kW. The basic unit
incorporates the STO in PLe safety function, and safety option cards add more than
15 safety functions. In addition to easy startup and energy-saving operation, custom
applications can be implemented quickly and easily using MOVIKIT® modules.
MOVIDRIVE® – Inverter technology Flexible motor control
11
MOVIDRIVE®
modularMOVIDRIVE®
systemMOVIDRIVE®
technology
Features and equipment
An inverter series for all motors – operation of− Synchronous and asynchronous AC motors with/without encoder − Asynchronous motors with LSPM technology− Synchronous and asynchronous linear motors− Easy startup using electronic nameplate or electronic catalog− Startup of unknown motors using calibration function− Energy-saving functions for partial-load operation and standby mode
Compact multi-axis system consisting of power supply modules, regenerative power supply modules and single- and double-axis modules− Multi-encoder input in the basic unit− EtherCAT®/SBusPLUS in the basic unit− Up to 30 drives on one power supply
module− Up to 800m motor cable length− State-of-the-art control modes for
optimum control performance− Can be used in TN, TT and
IT systems− IP20 protection in all sizes− Control via MOVI-C® CONTROLLER
Single-axis unit with own mains connection− Perfect addition to the multi-axis
system for high motor power ratings or long cable runs
− Multi-encoder input in the basic unit− EtherCAT®/SBusPLUS in the basic unit− Up to 1200 m motor cable length− Newest control modes for optimum
control performance− Can be used in TN, TT and
IT systems− IP20 protection in all sizes− Control via MOVI-C® CONTROLLER
Single-axis unit with own mains connection and direct fieldbus connection via pluggable fieldbus interfaces− Startup via pluggable operator
panels or engineering software− Integrated memory card to back up
device data− Integrated DC 24 V switched-mode
power supply
Integrated safety technology
MOVISAFE® − STO in PLe safety function integrated in the basic unit − Safe communication via PROFINET/PROFIsafe− Safety functions on the MOVISAFE® safety option card− Simple startup by entering parameters− Fully integrated diagnostics and scope functionsHigh-quality safety functions: SS1, SS2, SOS, SLS, SSR, SSM, SLI, SLA, SDI, SBC
Explosion protection Compatible with explosion-proof motors
12 MOVIDRIVE®
MOVIDRIVE®
modularMOVIDRIVE®
systemMOVIDRIVE®
technology
Nominal voltage V
3 x AC 380 – 500 3 x AC 200 – 2403 x AC 380 – 500
3 x AC 200 – 2403 x AC 380 – 500
Rated output – power supply module kW
10 – 110 – –
Nominal output current – single-axis module A
2 – 180 – –
Nominal powerkW
– 0.55 – 315 0.55 – 315
Nominal output current – double-axis module A
2 – 8 – –
Overload capacity 250% 200% 200%
Options • Operator panels • Encoder interfaces for motor and distance encoders • PROFINET fieldbus connections, Modbus TCP/IP, EtherNet/IPTM, EtherCAT®, EtherCAT® CiA402, PROFIBUS, DeviceNetTM, PROFIsafe via PROFIBUS / PROFIsafe via PROFINET • Extension for inputs and outputs • Regenerative power supply • Braking resistors • Line choke • Line filters • Output chokes • Output filters
Single-cable technology
Data interface between inverter and drive for transferring− Safe and non-safe encoder data− Motor temperature− Switching status of brake and brake wearFeatures− Robust data interface− Cable lengths up to 200m− Asynchronous and synchronous motors− One hybrid cable for motor power, brake control and data− Fully integrated digital motor encoders
MOVIDRIVE® – Inverter technology Technical data
13
14 Drive technology
Standard and servo gear units Motors
Overview Five standard gear unit series− One-, two- and three-stage helical gear units,
R series: 440 – 159,300 lb-in output torque − Two- and three-stage parallel-shaft helical gear units,
F series: 1,150 – 159,300 lb-in output torque− Two- and three-stage helical-bevel gear units,
K series: 710 – 442,500 lb-in output torque− Two-stage helical-worm gear units,
S series: 820 – 35,400 lb-in output torque− One- and two-stage right-angle gear units,
W series: 220 – 1,590 lb-in output torque
− DR.. series AC motors (1 speed), 2-, 4- and 6-pole − Pole-changing DR.. series AC motors
(2 speeds) cover outputs from 0.09 - 225 kW (.12 - 300 hp) and energy efficiency classes from IE1 to IE4
Also available: Torque motors, single-phase motors, and aseptic motors and motors with explosion protection
Two servo gear unit series− Low backlash planetary servo gear units from the
PS.F series: 220 – 26,500 lb-in nominal torque PS.C: 265 – 2,830 lb-in nominal torque
− Low backlash helical-bevel servo gear units from the BS.F series: 350 – 10,600 lb-in nominal torque
− Synchronous and asynchronous servomotors for high dynamic requirements, also with explosion protection
− linear motors and electric cylinders
Combined with an extensive range of brakes, encoders, plug connectors, cooling fans, special coatings and surface treatments, the modular system offers you the perfect drive for your application.
MOVI-C® control technology works with a wide range of gearmotors and servo drives
in various sizes and torque ratings. Linear motors, electric cylinders, brakes, built-in
encoders and diagnostic units are also compatible.
NEW: Motor with single-cable connection for power and encoder feedback
Drive technologyMotion solutions
15
seweurodrive.com
U.S. Operations
Southeast Region (U.S. Headquarters)
SEW-EURODRIVE, Inc.1295 Old Spartanburg Hwy.Lyman, SC 29365P: (864) 439-7537F: (864) [email protected]
Midwest Region
SEW-EURODRIVE, Inc.2001 West Main St.Troy, OH 45373P: (937) 335-0036F: (937) [email protected]
Northeast Region
SEW-EURODRIVE, Inc.2107 High Hill Rd.Bridgeport, NJ 08014P: (856) 467-2277F: (856) [email protected]
Southwest Region
SEW-EURODRIVE, Inc.3950 Platinum WayDallas, TX 75237P: (214) 330-4824F: (214) [email protected]
Western Region
SEW-EURODRIVE, Inc.30599 San Antonio St.Hayward, CA 94544P: (510) 487-3560F: (510) [email protected]
Industrial Gears
SEW-EURODRIVE, Inc.148 Finch Rd.Wellford, SC 29385P: (864) 439-8792F: (864) [email protected]
Drive Technology \ Drive Automation \ System Integration \ Services
2309
051
0US
/ 0
317