service that worksproducts that perform PAGE€¦ · PAGE 2 service that works...products that...

Click or scan QR codeto see product video

PRODUCT HIGHLIGHT

RELATED ITEMS

The Coll-O-Crimp® I is the time-proven ‘mini-factory’ that you can easily set up in your own shop. Fast, easy, compact and various power sources available make this crimper versatile for even the smallest of workshops.

Capacity: 3/16” I.D. fiber braid through 1-3/8” I.D. 2 wire hoseMounting: BenchSize: 16-1/4” High, 8” Wide, 21-3/4” DeepWeight: 113 lbs

Part No. Description Eaton No.897.2 Collet U Series 1/4 T-400-2C897.3 Collet U Series 3/8 T-400-3C897.4 Collet U Series 1/2 T-400-4C897.6 Collet U Series 3/4 T-400-5C897.7.0 Collet U Series 1 T-400-6C897.9 Spacer Ring - Black T-400-10897.10 Spacer Ring - Silver T-400-11897.18 Spacer Ring - Yellow T-400-62897.11 36” Hose Assembly T-400-16897.12 Instruction Kit T-400-M897.13 Die Ring T-400-8897.14 Electric Pump (220v) T-421U

COLL-O-CRIMP® IIncludes one each of the following:ELECTRIC PUMP PAK

Part No.897.401

Z-SERIES TOOLING KITS

Collet Spacer Ring Spacer Ring ColorET400DC-M150S ET1000SR-M100A PurpleET400DC-M195S T-400-62 YellowET400DC-M230S T-400-46R Black/TanET400DC-M245S ET1000SR-M190D Lt. GreenET400DC-M295S T-400-37 GreenET400DC-M375S T-400-10 Black

ET400SR-002 Black/GreenT-400-48R Black/OrangeET400SR-003 Black/PurpleT-400-49R Black/SilverT-400-112 Tan

ET400TP-0001 CRIMP KIT FOR (T-400 CRIMPER)Kit Includes:

(For Braided Hose sizes -4 thru 16 (no -10) one-wire and two-wire)*Note: (897.400.1) Kit includes ET400AR-001 (897.44.4) base halves

Part No.897.400.1

(All Z-Series tooling is Drop-Shipped from Mfg.)

INDIVIDUAL COMPONENTS:COLL-O-CRIMP® I

Part No. Description Eaton No.897.37 Spacer Ring - Green T-400-37897.38 Spacer Ring - Red T-400-38897.15 Air/Hydraulic Pump T-402-2897.16 108” Hose Assembly T-400-18

SERV

ICE

THAT

WO

RKS®

Ed. 1

7 Vo

l. 4

Weatherhead Crimp Specification are also available at:www.eatonpowersource.com/crimp-specs/

EATON CRIMP CHARTS

Part No. Crimper979.8992 T480979.8993 T400/460979.8994 T420

service that works...products that performPAGE 2

FASTENERS

DELTA PLASTIC ANCHORS

Part No.DrillSize

ScrewSize

Screw Length*

Pullout Strength Length

Drill Depth

924.4.14 1/4” #8 - #10 1-1/2” 815 lbs 1-1/4” 1-3/4”924.4.38 3/8” 1/4” - 5/16” 2” 1543 lbs 1-7/8” 2-1/4”924.4.12 1/2” 5/16” - 3/8” 2-1/2” 2315 lbs 2-1/4” 2-3/4”

* Add thickness of item being hung to ensure proper pullout strength

Use in: Concrete, block, brick, stoneUse with: Sheet metal screws, wood screws and lag screwsMade of: Nylon

• Ribbed construction for maximum holding power• Specially designed wings prevent spinning• Spiral design keeps screw centered • Expands equally on all sides for better hold• Superior pullout strength when compared to other nylon anchors

Use in: Concrete, block, brick, wallboardUse with: Sheet metal screws, wood screws, machine screws and lag screwsMade of: Nylon

• Drill hole 1/2” deeper than anchor

Part No. Size Fastener Used924.5.4 5/32” x 3/4” #6924.5.5 3/16” x 1” #8924.5.6 1/4” x 1-3/16” #12924.5.7.0 1/4” x 1-3/8” #12 or 1/4” Lag924.5.8 5/16” x 1-1/2” 1/4” or 5/16” Lag924.5.10 3/8” x 2” 5/16” or 3/8” Lag924.5.16 5/8” x 3-1/8” 5/8” Lag

MUNGO PLASTIC ANCHORS

Use in: Concrete, brick, wallboard, plasterUse with: Sheet metal screws, wood screws and lag screwsMade of: Nylon

• FINS - anchor in overhead applications prior to expansion• KNOT formation anchor - gives positive bearing in hollow materials• Drill hole 1/2” deeper than anchor length• Screw length should be a minimum of 1/4” longer than anchor

Part No.Item Description

Anchor/ Drill Dia.

Fastener Used

924.6.6 1/4” x 1-3/4” 1/4” #8924.6.8 5/16” x 2” 5/16” 1/4” Lag924.6.10 3/8” x 2-3/8” 3/8” 5/16” Lag

MUNGO UNIVERSAL PLASTIC ANCHORS

Part No. Size

Fits Screw SizesSMS-LAG

Use Drill Size

Min Hole Depth in Solid Material

Min wall Thickness

Min TL

924.13.316 3/16" #10 - 3/16" 3/16" 1-1/2" 1/4" 1-3/16"+L924.13.14 1/4" #6 - 1/4" 1/4" 2-3/4" 3/8" 1-3/8"+L924.13.516 5/16" #8 - 5/16" 5/16" 3-1/4" 1/2" 1-13/16"+L

• ALLIGATOR anchors will extrude up to 2x its original length in solid wall, sealing the hole and providing highest holding power

• For best results, use a screw gun for installation in solid walls• If you hit a hidden cavity, the screw opens the anchor and locks securely

PLASTIC ALLIGATOR

service that works...products that perform PAGE 3

ELECTRICAL

Part No.724.064219

HALOGEN FOG LIGHT

Part No. Description MTS MTB Length Width881.01.8418 Dual Clamp Tie UV Black 150 lb (670N) 1.3” (33mm) 13” (331mm) .50” (12.7mm)881.01.8420 Dual Clamp Tie UV Black 150 lb (670N) 2.3” (58mm) 19.2” (489mm) .50” (12.7mm)

DUAL CLAMP TIE

Dual clamp ties are designed to provide parallel separation between hoses, wires, cables and tubing, protecting them from abrasion. These ties have a .25” mounting hPole for securing bundles along the chassis of tracks, trailers and heavy duty equipment. The unique one-piece design features the dual head centered on the strap. Straps are releasable for increased serviceability.

Part No. Description735.12.614 Low Peak Fuse 6-1/4”

• 6-1/4 amp• 600 VAC or less• Time delay• 13/32” x 1-1/2”

LP-CC LOW PEAK FUSE

Part No. Description727.845 LED License & Utility Light

LED LICENSE & UTILITY LIGHT

GRIP TIES

• 4-Diode, LED license and utility light• Durable, low-draw LED design with hardwired leads

• 29.6” long, 200 lb tensile strength, PA66, yellow• The heavy-duty speedy tie features a specially

designed head and patented trigger to allow for repeated use in temporary bundling applications

• Additional design feature on the head allows excess strap to be tucked away after installation

Part No.881.01.8079

RELEASABLE CABLE TIE

RELEASABLE CABLE TIE

Part No. Description881.01.8034 Grip Tie, 6.0"x.5", Polyamide; Polyethylene, Black881.01.8035 Grip Tie, 8.0"x.5", Polyamide; Polyethylene, Black881.01.8036 Grip Tie, 11.0"x.5", Polyamide; Polyethylene, Black881.01.8041 Grip Tie, 8.0"x.5", Polyamide; Polyethylene, Red881.01.8043 Grip Tie,15.0"x.75", Polyamide; Polyethylene, Red881.01.8045 Grip Tie, 8.0"x.5", Polyamide; Polyethylene, Orange881.01.8046 Grip Tie, 11.0"x.5", Polyamide; Polyethylene, Orange881.01.8047 Grip Tie,15.0"x.75", Polyamide; Polyethylene, Orange881.01.8048 Grip Tie, 6.0"x.5", Polyamide; Polyethylene, Yellow881.01.8049 Grip Tie, 8.0"x.5", Polyamide; Polyethylene, Yellow881.01.8051 Grip Tie, 11.0"x.5", Polyamide; Polyethylene, Yellow881.01.8052 Grip Tie,15.0"x.75", Polyamide; Polyethylene, Yellow881.01.8053 Grip Tie, 6.0"x.5", Polyamide; Polyethylene, Green881.01.8055 Grip Tie, 8.0"x.5", Polyamide; Polyethylene, Green881.01.5057 Grip Tie, 11.0"x.5", Polyamide; Polyethylene, Green881.01.8059 Grip Tie,15.0"x.75", Polyamide; Polyethylene, Green881.01.8061 Grip Tie, 6.0"x.5", Polyamide; Polyethylene, Blue881.01.8063 Grip Tie, 8.0"x.5", Polyamide; Polyethylene, Blue881.01.8065 Grip Tie, 11.0"x.5", Polyamide; Polyethylene, Blue881.01.8066 Grip Tie,15.0"x.75", Polyamide; Polyethylene, Blue

• Features quick release for repetitive access to cable and wire• Can be opened and closed numerous times without failure• Adjustable so one size can accommodate multiple bundle sizes

Part No. Size881.8094 8”881.8095 11”881.9096 14”

Easily mount to any standard surface with a screw or nail without splitting the tie itself, using the evenly spaced pre-molded holes. Offered in 8”, 11”, 14” and lengths.

• Dual track locking feature• 90 pound tensile strength• UV resistant; plenum rated• 2-4” max bundle• Molded from 6/6 Nylon• Operating temperature

ranging from -40° F (-40° C) to 185° F (85° C)

NEW

NEWFILL-IN

NEWNEW

NEW

• Replacement fog lamp for various Subaru, Toyota and Lexus applications

• H16 / bulb# 64219• T3-1/2 base, 12 volt, 19 watt• Lexus ES300h 2013,

Lexus ES350 2013• Subaru Legacy 2013• Toyota Land Cruiser 2013• Toyota Prius 2012-2013• Toyota Prius C 2012-2013,

Toyota Rav4 2013


New Body Hardware

• Compatible with only Sure-Fil Station w/Viton Seals (697.7370)

• 16 oz capacity• Made of Electroless Nickel Plated Aluminum

for superior chemical resistance• Same diameter as an aerosol can• Slim design fits in your hand• Lightweight• Viton and neoprene valves included• Replacement valve kits available• Can be filled and pressurized manually

NEW NEW

NEW

CHEMICALS

MPS 200LOW VOC MULTI PURPOSE SOLVENT

• Formulated to meet California VOC limits• Highly concentrated non-chlorinated

solvent blend that can be used for a wide range of applications

• Safe to use on painted surfaces, flexible plastics, fiberglass, rubber and vinyl

• Contains no acetone• Phosphate-free• No chlorinated solvents

OHIOPart No. Description697.7304 Model B Atomizer Sprayer 16 oz697.7304.02 Neoprene Replacement Kit 697.7304.03 Viton Replacement Kit

MODEL B ATOMIZER SPRAYER

ISI POLY AIR TOOL OIL

Part No. Description891.4952 1 Pint891.4952.1 Case of 12 Pints891.4953 1 Gallon891.4953.1 Case of 4 Gallons

• Special formulation for lubricating pneumatic tools• Absorbs moisture and protects tools from

rust and corrosion• Can be used in an airline lubricator or a squirt bottle• Dissolves gum and varnish deposits

Part No. Description796.1009.5 MPS 200 - 5 Gallon796.1009.30 MPS 200 - 30 Gallon796.1009.55 MPS 200 - 55 Gallon

Part No. Seals Description697.7350 Viton Sure-Fil only697.7360 Viton Sure-Fil with Tabletop697.7350.1 Viton 32 oz Quick-Connect Cap*

SURE-FIL® 32OZ AUTOMATED FILLING STATION

Drop ship only – Must be entered on separate ordersShipping costs will be actual freight, call ahead for quote***Must be properly grounded by an electrician***

• Works exclusively with Sure Shot® sprayers• Lever control fills and pressurizes in seconds without removing the filler cap• Top fill port eliminates leaking seals• Compatible with “A” model 32 oz Sure Shot® Sprayer• A 32 oz Quick-Connect Cap (697.7350.1) is required for each Sure Shot®

Sprayer used with Sure-Fil Automated Filling System*

SURE SHOT LIQUID MEASURER

• Useful tool for easy pouring and filling of liquids into the small opening of the Sure Shot® Sprayer

• Heavy-duty polyethylene container• Brass mesh screening• Also includes extra filler spout extension• Capacity: 1 quart

Part No.697.7320

Additional Information: MPS-200 works well with the Milwaukee Sprayer Sure-Fil Automated Filling Station (697.7350) and Sure Shot Sprayers. Our latest addition to this line is the Model B Atomizer Sprayer (697.7304) that contains both a neoprene and Viton valve kit allowing the sprayer to be used for multiple solvent products. When using MPS 200 with the Model B Atomizer sprayer, use the neoprene o-ring and valve set provided. Replacement Viton (697.7304.03) and neoprene (697.7304.02) sets are also available. The Model B Atomizer is only compatible only with Sure-Fil Station w/ Viton Seals (697.7370). See the complete line of the Milwaukee Sprayer products under chemical Accessories & Applicators in our catalog or on the web.

Part No. Description822.06040 3M Adhesive Remover 5 oz

3M ADHESIVE REMOVER

• Adhesive remover for cleanup of paint over spray and adhesive build-up

• Clean, non-filming formulation• Removes grease, oil, ink and most adhesives

without the need to soak• Also functions as a mold release• Remove adhesive without damaging the

surface underneath

OHIO

MPS 100MULTI PURPOSE SOLVENT

Part No. Package796.1003.5 5 Gallon Pail796.1003.30 30 Gallon Drum796.1003.55 55 Gallon Drum

• MPS 100 is a highly concentrated, non-chlorinated solvent blend that can be used for a wide range of applications

• Fast evaporating• Contains no chlorinated solvents• Safe for use on painted surfaces, flexible

plastics, fiberglass, rubber and vinyl

service that works...products that perform PAGE 5

NEW

CHEMICALS

FLUID POWER

SHOP SUPPLIES

• For bonding pre-made gaskets• Hi-Temp Adhesive Sealant• Copper compound improves heat transfer• Apply to all flange surfaces, both sides of gasket and bolt threads• Effective from 50° F to 500°F• For metal gaskets• Eliminates hot spots• Exhaust manifolds cylinders

PERMATEX® COPPER SPRAY-A-GASKET®

Part No.NetWeight

PermatexPart No.

889.10101 9 oz 80697

PERMATEX® DIELECTRIC TUNE-UP GREASE

• Protects electrical connections and wiring from salt, dirt and corrosion

• Extends life of bulb sockets• Prevents voltage leakage around any

electrical connection• Prevents spark plugs from fusing

to boots required for modern high energy systems

• Applications: Automotive and marine electrical connections, spark plug boots, trailer hitches, battery terminals

Part No.NetWeight

PermatexPart No.

889.10067 0.33 oz Tube (9.5 g) 81150889.10068 3 oz Tube (85 g) 22058

• Effectively removes soils, dirt and grime• Strong detergents clean without solvents• Contains skin conditioners and coarse

pumice scrubbers• Color: Pink• Fragrance: Bubblegum• Dispenser: 991.101548 or 991.10151

Part No. Description991.10101 1 Gallon991.10101.1 6 x1 Gallons

QUIKLEEN® ABSORBENT

Part No. Size865.3200 Gallon Jug865.3200.1 Gallon Jug x 4865.3202 20 lb Bag

• Quikleen® is an inert, inorganic, non-biodegradable blend of minerals. It works by means of known as “silica encapsulation”. The absorbed liquid actually becomes part of the silica molecule

• All natural, non-toxic, non-flammable, non-biodegradable, non-leaching, reusable• Landfill acceptable and EPA certified• 1.5 lbs of Quikleen® will absorb an entire quart of motor oil vs 15 lbs of clay• Absorbs oils, fuels, grease, solvents, paint, coolants, bodily fluids, sewage

ISI POLY BAZOOKA - HEAVY DUTY HAND CLEANER WITH PUMICE

UNIVERSAL THREAD FITTINGS

NPTF - BSPP - BSPT - ISO 7 - ISO 228 - G THREAD - J THREADPressure Rating: Vacuum - 250 psiTemp Rating: 0 - 160 FTubing: Nylon, Polyethylene, Polyurethane, CopperMedia: Compressed Air, WaterMaterial: Nickel Plated Brass

Features:• No stripped fittings• No stripped ports• Completely reusable• Quick installation• No pitch identification

STRAIGHT MALE - INCH TUBE

Part No. Tube Thread (A) Length (L)689.89.22 1/8” 1/8” .650689.89.24 1/8” 1/4” .728689.89.42 1/4” 1/8” .846689.89.44 1/4” 1/4” .807689.890.52 5/16” (M8) 1/8” .945689.890.54 5/16” (M8) 1/4” .846689.890.56 5/16” (M8) 3/8” .905689.890.58 5/16” (M8) 1/2” .925689.89.62 3/8” 1/8” 1.082689.89.64 3/8” 1/4” 1.082689.89.66 3/8” 3/8” 1.023689.89.68 3/8” 1/2” 1.023689.89.84 1/2” 1/4” 1.222689.89.86 1/2” 3/8” 1.222689.89.88 1/2” 1/2” 1.222

STRAIGHT MALE - METRIC TUBE

Part No. Tube Thread (A) Length (L)689.5700.62 M6 1/8” .846689.5700.64 M6 1/4” .826689.5700.66 M6 3/8” .905689.5700.68 M6 1/2” .925689.890.52 M8 (5/16”) 1/8” .964689.890.54 M8 (5/16”) 1/4” .866689.890.56 M8 (5/16”) 3/8” .905689.890.58 M8 (5/16”) 1/2” .925689.5700.104 M10 1/4” 1.102689.5700.106 M10 3/8” .2165689.5700.108 M10 1/2” 1.023689.5700.124 M12 1/4” 1.24689.5700.126 M12 3/8” 1.161689.5700.128 M12 1/2” 1.24


SHOP SUPPLIES

AUTOMOTIVE

Part No. Description469.5200 8mm MSF 5.88mm ID X 13.5mm OD Ford-Lincoln OEM no. VP9GCH-19A593-EC469.5201 1/2” MSF 10.1mm ID x 17.75mm OD Ford-Lincoln OEM no. VP9GCH-19A593-AC469.2502 5/8” MSF 13.26mm ID x 20.92mm OD Ford-Lincoln OEM no. VP9GCH-19A593-BC

UNIVERSAL THREAD FITTINGS

NPTF - BSPP - BSPT - ISO 7 - ISO 228 - G THREAD - J THREADPressure Rating: Vacuum - 250 psiTemp Rating: 0 - 160 FTubing: Nylon, Polyethylene, Polyurethane, CopperMedia: Compressed Air, WaterMaterial: Nickel Plated Brass

Features:• No stripped fittings• No stripped ports• Completely reusable• Quick installation• No pitch identification

METAL SEAL FITTING

NEW

NEW

NEW

NEW

CAD

ILLA

C / G

M /

CHEV

Y / B

UIC

K

Fits these vehicles:• ‘15-16 Buick Enclave, ‘16 Encore, LaCrosse, Verano.

‘16 Cadillac ATS, CT6, CTS, ELR, ‘16 Chevy Cruze, ‘15-16 Equinox, ‘16 Impala, Malibu, Sonic, Spark, Trax, Volt, ‘15-16 Traverse, ‘15-16 Ford Edge, ‘16 Explorer, ‘15-16-17 F150

Part No.838.245

TPMS SNAP-IN VALVE

SWIVEL ELBOW MALE -INCH TUBEPart No. Tube Thread (A) L1 L2689.8911.22 1/8” 1/8” .708 .354689.8911.24 1/8” 1/4” .708 .771689.8911.54 5/32” 1/4” .826 .768689.8911.42 1/4” 1/8” .885 .776689.8911.44 1/4” 1/4” .885 .776689.8911.46 1/4” 3/8” .885 .776689.8911.52 5/16” (M8) 1/8” .885 .885689.8911.56 5/16” (M8) 3/8” .885 .905689.8911.58 5/16” (M8) 1/2” .885 .216689.8911.62 3/8” 1/8” 1.043 1.024689.8911.64 3/8” 1/4” 1.054 1.024689.8911.66 3/8” 3/8” .972 1.024689.8911.68 3/8” 1/2” 1.07 1.024689.8911.84 1/2” 1/4” 1.201 1.13689.8911.86 1/2” 3/8” 1.201 1.051689.8911.88 1/2” 1/2” 1.201 1.15

SWIVEL ELBOW MALE - METRIC TUBEPart No. Tube Thread (A) L1 L2689.5711.62 M6 1/8” .708 .354689.5711.64 M6 1/4” .708 .771689.8911.52 M8 (5/16) 1/8” .885 .885689.8911.54 M8 (5/16) 1/4” .885 .885689.8911.56 M8 (5/16) 3/8” .885 .905689.8911.58 M8 (5/16) 1/2” .885 .216689.5711.104 M10 1/4” 1.054 1.024689.5711.106 M10 3/8” .972 1.024689.5711.108 M10 1/2” 1.043 1.062689.5711.126 M12 3/8” 1.24 1.043689.5711.128 M12 1/2” 1.24 1.141

SWIVEL BRANCH TEE - INCH TUBE

Part No. Tube Thread (A) L1 L2689.8921.31032 5/32” 10-32 1.339 .709689.8921.32 5/32” 1/8” 1.338 .885

SWIVEL RUN TEE - INCH TUBE

Part No. Tube Thread (A) L1 L2689.8922.46 1/4” 3/8” .846 .866689.8922.64 3/8” 1/4” 1.062 1.043

502.1081Rear Compartment, Rocker & WheelhouseSpecialty RivetVarious Gm Models, Cadillac CTS & SRX `09-`15Cadillac CT6 `16+OEM No. 11561334Dia.: 1/4” (6.3mm)Flange: 1/2” (12.7mm)Grip Range: .059” - .138” (1.48mm - 3.50mm)Steel Rivet/Steel Mandrel

502.3555Headliner RetainerCadillac CT6 & ELR and Chevrolet Impala `15+OEM No. 11547047Top Head Dia.: 13mmBottom Head Dia.: 21mmStem Dia.: 7.4mmStem Length: 14mm

502.9036Scuff Plate & Trim Panel Molding Clipwith Sealer & Metal ReinforcementBuick Verano; Cadillac ATS, CTS & XTSChevrolet Camaro, Impala, Malibu & Volt `11+OEM No. 11611367Top Head Size: 17mm x 24mmBottom Head Size: 10mm x 24mmStem Length: 10mm

502.9085Belt Molding ClipChevrolet Silverado & Tahoe `14+GMC Sierra `14+OEM No. 11547339 Width: 26mmLength: 43mm

service that works...products that perform

ASSORTMENTS

GRAVITY FEED DISPENSER

• Designed for use with Roloc style abrasive discs• 6-compartments

NEW

NEW

PAGE 7

AUTOMOTIVEH

ON

DA

MER

CED

ES B

ENZ

SUBA

RU

INFI

NIT

I / N

ISSA

N

FORD

MA

ZDA

500.8694Tailgate Garnish Retainer With SealerMercedes-Benz C Class, CLK Class, E Class, SL Class & SLK Class `96+OEM No. 006-988-43-78Top Head Dia.: 13mmBottom Head Dia.: 18mmStem Dia.: 9.3mmStem Length: 13mm

502.1082Liftgate, Exterior Trim & Quarter Panel Specialty RivetFord Explorer & Flex `09+OEM No. W714004-S900Dia.: 3/16” (4.8mm)Flange: 7/16” (11mm)Grip Range: 3/16” – 3/8” (4.75mm – 9.53mm)Black Aluminum Rivet/Aluminum Mandrel

501.3454Molding Screw GrommetWith SealerInfiniti G35, G37, I30, I35, M35h, Q40, Q50, Q70, QX56 & QX80Nissan 350Z, Altima, Cube, Pathfinder & Sentra `03+OEM No. 76848-35F00Head Dia.: 18mmStem Dia.: 8.5mmStem Length: 14mm

500.8624Grill Retaining ClipHonda Civic `16+OEM No. 91504-TBA-A01Head Dia.: 16mmStem Dia.: 8mmStem Length: 11mm

500.8623Cowl Molding ClipHonda Civic `16+OEM No. 90617-TBA-A01Top Head: 18mm x 19mmStem Dia.: 6.6mmStem Length: 13mm

500.8622Bumper Filler & Door Panel RetainerMazda 2, 3, 5, 6, CX5, CX7 & CX9 `04+OEM No. FD01-68-AC3Hole: M8Flange: 22mmStem Length: 25mm

500.15039Rocker Molding RetainerMercedes-Benz C, CLA, CLS, E,GLA & S Class `15+OEM No. 000-991-74-98Head Dia.: 31mmStem Dia.: 7mmStem Length: 12mm

500.15038Door Garnish Molding Retainer With SealerMercedes-Benz GL450, GL550, ML320, ML550, R63, R320, R350 & R500 `04 - `11OEM No. 000-991-63-98, 000-991-63-98-M22Top Head Dia.: 13mmBottom Head Dia.: 18mmStem Dia.: 10.5mmStem Length: 12mm

501.8154Front Bumper, Fender, Exterior Trim & Quarter Panel Molding ClipHonda CR-V, HR-V & Pilot `12+OEM No. 90601-SMG-003Overall Height: 17.5mmWidth at Bottom: 14mm

500.8873Cowl Vent, Fender & Rocker RetainerSubaru B9, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, STI, Tribeca WRX `05+OEM No. 909130051Hole: M7Flange: 20mmStem Length: 12mm

AU

DI /

VO

LKSW

AG

EN

500.4034Bumper, Hood, Interior Trim &Quarter Panel Push-Type RetainerAudi 90, A4 & S4 and VW Beetle, Golf & Jetta `10+OEM No. N-905-369-01Hole: M5Head Dia.: 10mmStem Length: 11mm

500.2260Lower Skid Plate Cover & Radiator Support “U” Type NutAudi A4, A5, A6, A7, A8, Q5, S4,S5, S6 & S8 `08+OEM No. 8K0-805-922AScrew: M5Width: 19.3mmLength: 23.5mmCenter Of Hole to Edge: 13mmPanel Range: 2.2mm - 5.5mm

500.4035Splash Shield Retaining ClipAudi A4, A6, A7, S4, S5, S6,S7, Q5 & RS5 `08+OEM No. 4H0-825-429ASize: 22mm x 23mm

Part No. Description953.821.9 Gray

501.8153Side Panel Molding RetainerHonda Accord `98 - `15, Civic `07-`11OEM No. 91560-S04-003Top Head: 13mmBottom Head: 16mmStem Dia.: 9.5mmStem Length: 12mm

501.8152Wheel Arch Garnish MoldingRetainer with SealerHonda CR-V `07+, Pilot `16+OEM No. 91513-SMG-E01Top Head: 7mm x 7mmBottom Head: 10mm x 19.5mmStem Length: 6mm

Part No. Description971.68912 16 pcs

FITTINGS — UNIVERSAL THREAD M12

Component Qty.676.20.12 2676.24.12 2676.23.12 2689.5711.126 2689.5711.128 2689.5700.124 2689.5700.126 2689.5700.128 2953.912 1981.97168912 1982.971668912 1981.005 1



Component Qty.676.20.10 2676.23.10 2689.5711.104 3689.5711.106 3689.5711.108 3689.5700.104 3689.5700.106 3689.5700.108 3981.97168910 1982.97168910 1953.912 1981.005 1



Component Qty.676.20.8 2676.24.8 2676.23.8 2689.8911.52 3689.8911.54 3689.8911.56 3689.890.52 3689.890.54 3689.890.56 3981.9716898 1982.9716898 1981.005 1953.912 1



Component Qty.676.20.6 2676.24.6 2676.23.6 2689.5711.62 3689.5711.64 3689.5700.62 3689.5700.64 3689.5700.66 3981.9716896 1982.9716896 1981.005 1953.912 1


FITTINGS — UNIVERSAL THREAD 1/4”

Component Qty.676.03.4 2676.02.4 2676.10.4 2689.8911.42 3689.8911.44 3689.8911.46 3689.89.42 3689.89.44 3689.89.46 3981.97168914 1982.97168914 1981.005 1953.912 1



Component Qty.676.03.6 2676.02.6 2676.10.6 2689.8911.64 3689.8911.66 3689.8911.68 3689.89.64 3689.89.66 3689.89.68 3981.97168938 1982.97168938 1981.005 1953.912 1


FITTINGS — UNIVERSAL THREAD 1/4”, 3/8”, 1/2”

Component Qty.689.89.88 3689.8911.88 2676.03.8 2676.02.8 2676.10.8 2689.89.66 3689.8911.66 3676.03.6 2676.02.6 2676.10.6 2689.89.44 3689.8911.44 3676.03.4 2676.02.4 2676.10.4 2981.971689468 1982.971689468 1981.005 1953.920 1

CLAMPS — LINEAR ALL STAINLESS


Component Qty.534.01.20 5534.01.24 5534.01.28 5534.01.32 5534.01.36 5534.01.40 5534.01.44 5534.01.48 5

WASHERS — UNI-FIT


Components Qty.404.200.14 100404.200.516 100404.200.38 100404.200.716 50404.200.12 50404.200.58 25404.200.34 25



Component Qty.676.03.8 2676.02.8 2676.10.8 2689.8911.84 2689.8911.86 2689.8911.88 2689.89.84 3689.89.86 3689.89.88 3981.97168912 1982.979168912 1981.005 1953.912 1

Ed. 17 Vol. 4

SERVICE THAT W

ORKS®

ASSORTMENTS NEW

971.68938

service that worksproducts that perform PAGE€¦ · PAGE 2 service that works...products that...

Documents

Transcript of service that worksproducts that perform PAGE€¦ · PAGE 2 service that works...products that...