SERVICE MENU PROPERTIES OPTIONSsupport.hbaustria.at/loki/servicemanual/beko/lh/service...SERVICE...
Transcript of SERVICE MENU PROPERTIES OPTIONSsupport.hbaustria.at/loki/servicemanual/beko/lh/service...SERVICE...
SERVICE MENU PROPERTIES OPTIONSTUNER YTPE SS_TECC2949 ; TH_CTF554X
TELETEXT NO TEXT : No teletextFAST : FastextFAST&TOP : Toptext ve FastextNOTE: FOR TOSHIBA ve GRUNDIG choose "FAST&TOP"
TIMER MODE OFF TIMER : Timer, at off time mode.SLEEP TIMER : Timer , at sleep mode timer mode
NOT: For Grundig set OFF TIMER MSP CLIP REDUCE VOL : MSP output limiting is made with volume
REDUCE TONE : MSP çutput limiting is made with bas and trebbleCOMPROMISE : MSP utput limiting is made with volume, bas and trebble.DYNAMIC : MSP utput limiting is made automatically by ICNOTE: "MSP CLIP" option will be set"REDUCE VOL" in all versions.
SWAP/ZAPP SWAP : Swap func. is active ; ZAPP : Zapp func. İs active.NOTE: For Grundig it will be set ZAPP.
DOLBY VIRT ON : Dolby Virtual is on : OFF : Dolby Virtual is off.NOTE: Default is OFF and will be set due to the customer demand.
LTI ON : LTI is oN ; OFF : LTI is OFF.CTI ON : CTI is ON ; OFF : CTI is OFF.
NOTE: İf not mentioned LTI is ON, CTI is OFF.NOTE: For Toshiba LTI and CTI are OFF
ATS Automotic tuning system : ON:Active , OFF:Not activeNot: ATS will be choosen OFF unless stated by the customer
SCART2 ON : Scart 2 is available ; OFF : Scart 2 is not availableFAV ON : FrontAV is available ; OFF : FrontAV is not available.
SVHS ON : SVHS is available ; OFF : SVHS is not available.NOTE: SCART2, FAV and SVHS options will be set ON for Grundig Amira productions.
HOTEL MODE ON : Hotel TV mode is on ; OFF : Hotel TV mode is OFF.NOTE: If no customer demand it will be set OFFin all productions,
STDBY RECALL: ON : TV turns on at the same mode as in turning off ; OFF : TV will be at StdBy mode at first turning on.
NOTE : For Grundig it will be set OFF, in other produstions it will be set ON at the end RECALL LAST AV ON : Turning on at last AV mode is active. of the band
OFF : Turning on at last AV mode is not active.NOT: For Grundig it will be set OFF.
MSP CAR. MUTE ON : For export productions ; OFF : For import productions.NOTE: For Grundig it wll be set ON
WSS RF ON : Auto WSS option is ON; OFF : Auto WSS option OFF.AUTO AV 16:9 ON : At AV's automatic switching control is ON.
OFF : At AV's automatic switching control is OFFNOTE: This option will be set ON in all productions.
FIRST ATS ON : At first turning on automatic programming property is on.OFF:At first turning on automatic programming property is off.
NOTE: I it will be ON at GRUNDIG products.BACKLIGHT POL ON : Panel backlight polarization is on
OFF: Panel backlight polarization is off.FACTORY MODE ON : Factory mode is on; OFF : Factory mode is off.
WHITE R 128 BRI 130 AGC 8WHITE G 128 CON 158WHITE B 128 COL 128
PRESCALE FM 19 PRESCL SCART 16PRESCL NICAM 40 HOTEL VOLUME 30 ( at Hotel TV it will be set 30 )FACTORY RESET ON : Back to the Factory out adjustments option is active
OFF : Back to the Factory out adjustments option is not activeNOTE: "BRI", "CON" and "COL" options are not available Toshiba SWNOTE: WHITE R, G, B values are takes automatic values after Factory Reset and
they will be left at last situation after the adjusmentOnly for wireless products:
AVW Wireless option. ON:Open , OFF:ClosedNOT: Default is OFF. İt will be selected ON at wireless productions.
LOCATION Location option. INDOOR OUTDOOR, Default değeri INDOOR'dur.COUNTRY Türkiye , UK , Schweiz , Sverige , Espana , Portugal , Polska , Norge , Nederland
Italia , Ireland , Magyar , France , Suomi , Denmark , Çek ,Croatia , BelgeNOT: Default option is Turkey. Location must be selected according to product sent
location. Parameters changed after Factory Reset The service menu options below will be at their initial values afte Factroy Reset Hotel mode, StdBy Recall, MSP Carrier Mute, WSS RF, Auto AV 16:9, First ATS, Backlight polarity White R,G,B, Prescale FM,NICAM,SCART, Hotel Volume, AGC, Tuner Type,Timer Mode ,MSP clip Swap/Zapp. These values are mentioned on service menu properties. In Grundig and Toshiba S/W's, these values are coming from clients. At Beko S/W if customer wants diiferent values then default values the desired values wil be set after factory reset and FIRST ATS will be set ON than left the service mode and turn off the tv.TELETEXT, LTI/CTI ve DOLBY VIRTUAL options are not affected by factory reset and will be set according to customer demand
HEADPHONEAMPL.TDA1308
AUDIO AMPL.MAX9704
MULTISYSTEMTUNER
SAWFILTER IF INPUT
SC1-AUDIO-OUT
SC2-AUDIO-OUT
SC1 AUDIO-IN
RGB-IN
SC1-CVBS-IN
SC2-CVBS-IN
SVHS-C/Y IN
RCA-CVBS-IN
SC1-CVBS-OUT
SC2-CVBS-OUT
VCTI ICPSS DIP88
U303
Aout1 R/L
Aout2 R/L
Ain2 L/R
Ain1 L/R
VCT-R
GB-O
UT
VS-VCTHS-VC
T
SUBWOOF. SUBWOOFER AMP.MP7731
SUBWOOFERSPEAKER
RESET Q
L/R OUT
MUTE
HEADPHONEJACK
SPEAKERS
SCART 1
SCART 2
CVBSRCA-IN
SVHS IN
EEPROM24LC02
VGASOCKET
MEMORYCARD
RGB-DSUB
HS/VS-DSUB
RGB-SD
HS/VS-SD
RGBSWITCHPI3V512
PC-SD-SW
RGB-SW
HS/VS-SW
2nd RGBSWITCHPI3V512
S1-MAIN
-SW
RGB-G
HS/VS-G
AUDIO-R/LMEMORY CARD
AUDIO-R/L-RCA
CD4053
AUDIOSWITCH
MEMORY CARDRCA SWITCH
CD4053
AUDIOSWITCH
AUDIO-R/L-SC2
MR-R/L
RCA-S2-SWITCH
Ain1R
Ain1L
OPTIONAL OPTIONAL
OPTIONAL
OPTIONAL
BLOCK DIAGRAM OF VCTI AND PERIPHERALS
BASELINE MIDRANGE15" LCD 20" LCD
BACK CONNECTIONSAntenna (IEC 169-2, Female) 1 1
Scart 1 2S-video In (DIN) 1 1Video In (RCA) 1 1Audio In (2 RCA) 1 1Video Out (RCA) NO NOAudio Out (2 RCA) 1 1Progressive YPbPr In (3 RCA) NO NO
Progressive Audio In (2 RCA) NO NO
DVI NO NOHDMI NO NOPC Audio (L, R) NO NOSubwoofer NO NOD-Sub 15 1 1SPDIF Coaxial NO NOSPDIF Optic NO NORS232 NO NOCI NO NOHeadphone 1 (on cabinet) 1 (on cabinet)Audio Output Conn. NO NO
FRONT\SIDE CONNECTIONSS-video In (DIN) NO NOVideo In (RCA) NO NOAudio In (2 RCA) NO NO
5in1 1, if MCR 1, if MCRUSB 1, if MCR 1, if MCRCompact Flash 1, if MCR 1, if MCR
Front\Side AV NO NOMemory Card Reader OPT. Default: NO OPT. Default: NO
VIDEO & GRAPHICS IN\OUTCVBS In 2 3RF In 1 1Y\C In 1 1RGB+FB In-Video 1 1RGB+HS, VS In -Graphics 1 1
YPbPr In (Progressive) Through D-sub 15 conn. OPT.Default: NO
OPT.Default: NO
DVI In NO NOHDMI In NO NOCVBS Out 1 2RGB, FB Out NO NO
AUDIO IN\OUTStereo L, R In 2 3Stereo L, R Out 2 3
Subwoofer Out To drive subwoofer speakerinside Grundig cabinets
OPT.Default: NO
OPT.Default: NO
Subwoofer Output Power To drive subwoofer speakerinside Grundig cabinets TBD TBD
S\PDIF In NO NOS\PDIF Out NO NOAudio Output Power 2x2W for 15" 2x3W for 17", 17"w, 20", 22", 23"Number of speakers 2 (L+R) 2 (L+R)Speaker Placement Inside the cabinet Inside the cabinet
ANALOG FRONT END
Type Conventional tuner+IF Demodulator
Conventional tuner+IF Demodulator
Receiving System PAL B/G+I+D/KSECAM L/L'
PAL B/G+I+D/KSECAM L/L'
Input Freq. Range (MHz) VHF (48,25-463,25MHz)UHF (471,25-855,25MHz)
VHF (48,25-463,25MHz)UHF (471,25-855,25MHz)
Tune down to 45,25MHzTune up to 863,25MHz YES YES
BEKO MODELSLH VCTI+GENESIS LCD TV TARGET SPECS
MEMORY CARD READER CONNECTIONS (MCR)
ADD ON MODULE CONNECTION OPTIONS
BASELINE MIDRANGE
BEKO MODELSLH VCTI+GENESIS LCD TV TARGET SPECSInput Connector IEC 169-2, Female IEC 169-2, FemaleAerial Input Impedance 75 Ohm (unbalanced) 75 Ohm (unbalanced)Signal LevelTuning System FST FSTTuning Control PLL PLLAntenna Loop Through YES YESRF Modulator NO NOChannel Bandwidth 6\7\8 MHz Switchable 6\7\8 MHz SwitchableFE Control I2C I2C
VIDEO & GRAPHICS PROCESSING
# of ADCs 5 5Resolution 8-bit 8-bitAnalog BW 27Mhz 27MhzADC Clk. Freq. 27Mhz 27MhzAnalog\Digitized Digitized DigitizedStandart PAL, SECAM, NTSC PAL, SECAM, NTSC
Comb Filter Adaptive 4H\2H Adaptive 4H\2H
LTI, CTI Filters OPT.Default: NO
OPT.Default: NO
# of ADCs 3 3Resolution 8-bit 8-bitAnalog BW SXGA 75Hz/UXGA 60Hz SXGA 75Hz/UXGA 60HzADC Clk. Freq. 10MHz to 162 MHz 10MHz to 162 MHz
Sync On Green (SOG) support on graphics YES YES
DVI 1.0 Compliant NA NAResolution NA NAAnalog\Digital NA NAHDCP Support NA NA2 Pixel \ Clk Support NA NAHDMI 1.x Compliant NA NAResolution NA NAHDCP Support NA NA2 Pixel \ Clk Support NA NADe-interlacing Spatial De-interlacing Spatial De-interlacingFilm Mode Detection3:2, 2:2 Pull Down NO NO
Frame Rate Conversion (60p, 75p, 100i, 120i) NO NO
Noise Reduction NO NOScaling Upto SXGA at 75Hz Upto SXGA at 75HzDe-interlacing NA NAFilm Mode Detection3:2, 2:2 Pull Down NA NA
Frame Rate Conversion (60p, 75p, 100i, 120i) NA NA
Noise Reduction NA NAScaling NA NA
Gamma Correction 8 to 10-bit LUT 8 to 10-bit LUT
Histogram Equalization OPT.Default: NO
OPT.Default: NO
DAC NO NODVI Tx NO NOLVDS Rx NO NOLVDS Tx YES YESPIP\PAP\PAT NO NOOSD Bitmap Based Bitmap Based
Brightness YES YESContrast YES YESColor\Saturation YES YESHue YES YES
AUDIO PROCESSINGStandart(BG, DK, L\L', I, M, N, BTSC) BG, DK, L\L', I BG, DK, L\L', I
Stereo Decoding (German A2, Nicam, BTSC) German A2, Nicam German A2, Nicam
Dual I-II YES YESDolby Prologic NO NODolby Digital NO NO
Virtual Dolby OPT.Default: NO
OPT.Default: NO
Subwoofer OPT.Default: NO
OPT.Default: NO
FM Radio NO NOEffect\Spatial YES YES
Main Picture
PIP Picture
Color Controls
Chroma Decoding
ADC (Graphics)
DVI Receiver
HDMI Receiver
ADC (Video)
BASELINE MIDRANGE
BEKO MODELSLH VCTI+GENESIS LCD TV TARGET SPECSVBI DATA PROCESSING
Level (1.5, 2.5, Teleweb) Teletext 1.5 Teletext 1.5
Type
No Text OPT.Fast Text OPT.Top Text&Fast text OPT.DEFAULT: Top Text&Fast
No Text OPT.Fast Text OPT.Top Text&Fast text OPT.DEFAULT: Top Text&Fast
List Mode OPT.Default: NO
OPT.Default: NO
Page Memory 10p 10pWSS YES YESVPS\PDC\CNI YES YES
Closed Caption NO NOV-Chip NO NO
MEMORYFrame Buffer Memory(SDRAM) None None
Teletext Memory(SRAM) None None
FLASH (ROM) Memory 512kB 512kB
SUPPORTED OUTPUTS FOR DISPLAYSSingle TTL support 24-bit YES YESDual TTL support 48-bit NO NOSingle 10-bit TTL support 30-bit NO NODual 10-bit TTL support 60-bit NO NOSingle LVDS support (8-bit) YES YESDual LVDS support (8-bit) YES YESSingle LVDS support (10-bit) NO NODual LVDS support (10-bit) NO NOTiming Control Support NO NOSupported Output Upto SXGA at 60Hz Upto SXGA at 60Hz
DISPLAYType TFT-LCD TFT-LCDTarget Sizes 15" 17"W, 17", 20", 23"
MULTI WINDOWPIP (Picture In Picture) NA NASPLIT (PAP) NA NAVideo & Video NA NAVideo & Graphics (DVI, HDMI, D-sub15) NA NA
Video & Teletext NA NATeletext & Teletext NA NAGraphics & Graphics(DVI, HDMI, D-sub15) NA NA
Number of Windows NA NA2nd Tuner for PIP NA NAPIP Window Audio Support NA NA
APPLICATIONSMenu System Beko System Beko SystemRemote Control Beko RC Beko RC
Supported Menu Languages
ENGLISH, DEUTSCH, DUTCH, FRANCAIS, ESPAÑOL, ITALIANO, PORTUGUESA, EHΛΛNIKA, SVENSKA, NORSK, SUOMI, TÜRKÇE, POLSKI, MAGYAR, ČEŠTINA, ROMANESTE, SLOVENČINA, DANSK, SERBIAN, PЧCCKИЙ, Bulgarian, Crotian>> 22 Languages
ENGLISH, DEUTSCH, DUTCH, FRANCAIS, ESPAÑOL, ITALIANO, PORTUGUESA, EHΛΛNIKA, SVENSKA, NORSK, SUOMI, TÜRKÇE, POLSKI, MAGYAR, ČEŠTINA, ROMANESTE, SLOVENČINA, DANSK, SERBIAN, PЧCCKИЙ, Bulgarian, Crotian>> 22 Languages
4:3 YES YES
16:9 4:3 Panels: Depends on LCD16:9 Panels: YES
4:3 Panels: Depends on LCD16:9 Panels: YES
14:9 4:3 Panels: NO16: 9 Panels: Depends on LCD
4:3 Panels: NO16: 9 Panels: Depends on LCD
Panorama NO NO
Letterbox 4:3 Panels: NO16: 9 Panels: Depends on LCD
4:3 Panels: NO16: 9 Panels: Depends on LCD
Subtitle 4:3 Panels: NO16: 9 Panels: Depends on LCD
4:3 Panels: NO16: 9 Panels: Depends on LCD
Zoom NO NO
WSS (Wide Screen Signalling) YES (but application depends onLCD) YES (but application depends on LCD)
Picture Formats(4:3, 16:9, 14:9, Panorama, LetterBox, Subtitle)
Teletext
Closed Caption
Type
Content
BASELINE MIDRANGE
BEKO MODELSLH VCTI+GENESIS LCD TV TARGET SPECSATS (Automatic Tuning System) Frequency Search Frequency Search
Manual Search Frequency Search Frequency SearchAFT (Auto Fine Tuning) YES YESNumber of Program Storage 100 100No Ident Timer YES YESPicture Freeze NO NOEqualizer YES YESAVL(Automatic Volume Level) YES YES
Sound Status Memory YES YESPicture Status Memory YES YES
Zapping\Swap OPT. In Service MenuDefault: Zapp
OPT. In Service MenuDefault: Zapp
Panel Lock YES YESProgram Lock NO NOPicture Format Switching Through Scart (Pin 8) YES YES
Auto RGB Detect Through Scart (Pin 16) YES YES
DDC Support YES YES
Timer On\Off or Sleep OPT. In Service MenuDefault: On\Off Timer
OPT. In Service MenuDefault: On\Off Timer
Picture Smart Modes YES YESSound Smart Modes YES YESScart2 Out Selectable NO NOS-Video Input Through Scart2 NO NO
Color Enhancer OPT.Default: NO
OPT.Default: NO
Luminance Histogram OPT.Default: NO
OPT.Default: NO
Simple Hotel Mode
OPT. in Service MenuDafult: OffVolume Limited, No Access to SetUp
OPT. in Service MenuDafult: OffVolume Limited, No Access to SetUp
Stby to On in PC modewhen last watched is PC
OPT.Default: NO
OPT.Default: NO
Stby to On automatically when PC signal is available
OPT.Default: NO
OPT.Default: NO
Software Update Via Scart YES YESSeparate YPbPr Audio Support L, R NO NO
Memory Card Reader OPT.Deafult: NO
OPT.Deafult: NO
POWER SUPPLYPSU Type Internal Internal
15" 12V / 1.5A 12V/ 1.5A17" NA NA20" 12V / 2A 5V / 1.5A 12V / 2A 5V / 1.5A 22", 23" NA NA
Input Range 100V-240V, 50, 60Hz 100V-240V, 50, 60HzGroundless AC Plug (2 pin) YES (EXCEPT UK) YES (EXCEPT UK)St-By Power Consumption <3W <3W
REGULATIONS
EMCEN55020EN55013EN55022 (with PC)
EN55020EN55013EN55022 (with PC)
SAFETY EN60065:1998 EN60065:1998
CABINETOn\Off YES YESVolume Up YES YESVolume Down YES YESProgram Up YES YESProgram Down YES YESMenu YES YESSource Optional OptionalSingle color/Single Intensity NO NO
Single Color/Double Intensity YES YES
Multi color NO NO
On Timer Led OPT.Default: NO
OPT.Default: NO
Wake Up in PC
Ratings
LED
Keyboard
Electronic AS
1
Software Loading and Upgrading Instructions
1. Make connection between PC and chassis.
Sample connection tools are shown below
Connect cable to connector like shown below
Electronic AS
2
2. Run the program which is named GPROBE. You have to make initial settings to use program. Open connection setup tab from options menu.
Electronic AS
3
3. Make all the setting shown below according to serial port which you will use.(for example COM1 is selected below) Control that your settings are egual to below example.
4. Copy programming file (hex format) to programming directory. 5. Open program.txt (which is in programming directory) with notepad. Write
the name of software file (hex file) to last line like shown below. 6. There is a sample below. Original program.txt is shown left, and then modified
program.txt at right. Here SLH150_AU06_T47_S0.hex is programming software.
Electronic AS
4
7. Run GPROBE. 8. Select “batch” command below “commands” menu. 9. Select “program.txt” from the programming directory.
10. Programming starts when you select OK.
NOT: TV must be ON while you are programming tv. (not stand-by mode) Programming continues aproximately 33 seconds. 10.You will see the below writings while programming:
DebugOn: Command Successful. SetBuffer: Command Successful. Delay: Command Successful. Reset: Command Successful. Delay: Command Successful. RAMWrite: Command Successful. Run: Command Successful. Delay: Command Successful. RAMWrite: Command Successful. Run: Command Successful. Delay: Command Successful. Erasing FLASH... Done. Writing FLASH... Done. Execution time: 33.20s Batch: Command Successful.
SERVICE MENU OF THE TV
ITEM NAME OPTIONS/ VALUESDEFAULT VALUES OR
SETUPOPTIONSSCART 2 ON/OFF OFF
FAV ON/OFF ON
SVHS ON/OFF ON
HOTEL MODE ON/OFF OFF
STBY RECALL ON/OFF OFF
RECALL LAST AV ON/OFF OFF
MSP CARRIER MUTE ON/OFF OFF
WSS RF ON/OFF ON
AUTO AV 16:9 ON/OFF ON
FIRST ATS ON/OFF OFF
BACKLIGHT POL ON/OFF OFF
FACTORY MODE ON/OFF OFFADJUSTMENTSWHITE R 0-255 128
WHITE G 0-255 128
WHITE B 0-255 128
BRIGHTNESS 0-255 130
CONTRAST 0-257 158
COLOR 0-255 128
PRESCALE FM 0-127 37
PRESCALE NICAM 0-127 63
PRESCALE SCART 0-127 27
HOTEL VOLUME 0-63 16
AGC 0-31 23
FACTORY RESETSW DOWNLOAD
SELECTIONS
TUNER TYPE PHILIPS , SAMSUNG PHILIPS
TELETEXT FAST&TOP , NO TEXT ,FAST FAST&TOP
TIMER MODESLEEP TIMER OFF TIMER SLEEP TIMER
MSP CLIP REDUCE VOL REDUCE VOLUME REDUCE VOL
SWAP/ZAPP ZAPPDOLBY VIRTUEL ON/OFF OFF
LC (L5C) SERVICE MENU
Service Menu is entered by pressing 9, 3, 0, 1 keys on the remote controller when the Picture icon is highlighted in the Main Menu.
Service Menu has 3 sub-menus. These are:
Options
Adjustments
Selections.
Navigation through these menus can be done by pressing OK button. Every adjustment made in this menu is saved automatically.
OPTIONSOptions are adjustments that the user can select On or Off.
SCART 2 FAV SVHS HOTEL MODE STAND BY MSP CARRIER MUTE WSS SCART FIRST ATS
SCART 2 / FAV / SVHS If a source is disabled in the Service Menu, it will be skipped during source switches. If SCART2 is enabled, SW assumes that the FAV source share the same path as the SVHS source on the HW. If it is disabled, it is assumed that FAV and SVHS share separate paths. TUNER and SCART1 are enabled by default.
HOTEL MODE Enabling Hotel Mode has two effects. First, SETUP menu is no longer accessible by the user. Second, maximum adjustable volume value is limited to HOTEL VOLUME value. This value can be adjusted in the ADJUSTMENTS sub-menu of the Service Menu.
STAND BY If this Option is OFF, the TV will stay in Stand By mode after a Power On. If this Option is ON, the TV will recall its last stand by status before the Power Off, and switch on from Stand By automatically, if the last state was ‘Stand by On’.
MSP CARRIER MUTE If this option is ON, sound processor’s carrier mute functionality will be enabled. The MSP will mute the sound automatically if the signal quality is bad. Setting this option Off will disable this functionality.
ATSIf this option is set to ON, TV will display Country Selection menu in the next start. After some country is selected, the user will be prompted for the start of AutoProgramming process.
ADJUSTMENTS This sub-menu contains numeric adjustments. These items are:
WHITE R WHITE G WHITE B BRIGHTNESS CONTRAST COLOR PRESCALE FM PRESCALE NICAM PRESCALE SCART HOTEL VOLUME
WHITE R / WHITE G / WHITE B These are used for color bias adjustment. Unlike other items in the service menu, changes will take effect immediately.
PRESCALE FM / PRESCALE NICAM / PRESCALE SCART These are prescale values that will be used for the initialization of the sound processor (MSP), at the next switch on.
HOTEL VOLUME This value is used as the volume limit, when the Hotel Mode is on.
SELECTIONS This sub-menu contains selections.
TUNER TYPE SAMSUNG / PHILIPS
TELETEXT NO TEXT / FAST / FAST&TOP
MSP CLIP REDUCE VOL / REDUCE TONE
TUNER TYPE One of two supported tuner can be selected from this item. System must be restarted for this change to take effect.
TELETEXT NO TEXT: Teletext is totally disabled. TXT/MIX button will not be functional. AUTO picture format mode will be disabled in RF, F-AV and SHVS modes. Naming and sorting functionality during Autoprogramming will be disabled.
FAST: TOPtext functionality will be disabled.
FAST&TOP: TOPtext functionality is enabled.
TIMER MODE If OFF TIMER is selected, the user will be able to enter time of the day info for the TV to switch off. If SLEEP TIMER is selected, the user can specify some time period, after which the TV will go to stand by automatically.
MSP CLIP This selection identifies which method will be used by the sound processor to prevent clipping effects on volume.
AUTOPROGRAMMING When the user selects the Autoprogram item in Setup menu, Country Selection menu is opened. The user must select a country before the Autoprogramming starts. Broadcast system will be selected according to the country selected.
Broadcast systems according to countries:
BELGIUM BG + L CROATIA BG CZECH REP. DK DENMARK BG FINLAND BG FRANCE L + BG GERMANY BG GREECE BG HUNGARY DK IRELAND I ITALY BG NETHERLANDS BG NORWAY BG POLAND DK PORTUGAL BG SPAIN BG SWEDEN BG SWITZERLAND BG + L TURKEY BG UNITED KINGDOM I
For countries France, Belgium and Switzerland, autoprogramming is done twice. For Belgium and Switzerland, first BG channels will be searched, after the search in BG is done, searching will restart for L standard. If the selected country is France, the sequence of standards is reversed, thus, first L then BG.
TELETEXT LANGUAGES L5C SW decides which teletext language group will be used for teletext decoding, according to the country selected for autoprogramming.Teletext languages according to countries:
EAST EUROPE:CROATIA ,CZECH_REP, POLAND
WEST EUROPE: BELGIUM ,DENMARK, FINLAND, UK, FRANCE, GERMANY, IRELAND ,ITALY ,NETHERLANDS, NORWAY, PORTUGAL,SPAIN, SWEDEN, SWITZERLAND, HUNGARY
TURKISH-GREEK:GREECE TURKEY
PC MODE PC mode can be entered by pressing PC button on the remote controller. User can return back to TV mode by pressing the PC or TV buttons.
After the switching to PC mode, VGA input will be displayed on screen, as soon as the mode (input resolution and frequency) is determined.
If there is no input from the VGA input, NO SIGNAL dialog will be displayed for 15 seconds. At the end of this period if there is no signal from VGA input, the TV will go to Sleep State. While in the sleep state, the TV will keep monitoring the VGA input. If VGA signal is detected, the TV will wake from Sleep State, to PC mode. Alternatively, the user may select to switch the TV on from Sleep State, just like switching on from Stand-by. In this case, the set will switch on from TV mode.
SAFETY PRECAUTIONS
GENERAL GUIDELINES
1. Always use the manufacturer’s replacement safety components. The critical safety components marked with on the schematics diagrams should not be by other substitutes. Other substitute may create the electrical shock , fire or other hazards. Take attention to replace the spacers with the originals. Furthermore where a short circuit has occurred , replace those components that indicate evidence of overheating.
2. After servicing , see that all the protective devices such as insulation barriers, insulation papers, shields and isolation R-C combinations are correctly installed.
3. When the receiver is not being used for a long time of period of time , unplug the power cord of the Adaptor from the AC outlet.
Color TFT LCD Module is very sensitive both electrically and physically.Users, therefore, are requested to follow the “Guidance of handling color TFT LCD Module”on the followings.
1 - Be careful not to make scratch on the polarizer.
Surface of polarizer is soft and can be physically damaged easily.Please do not touch, push or rub polarizer surface with materials over HB hardness.
2 - Keep clean the surface. Please wear rubber glove when touch the surface of LCD screen. Please use soft and anti-static material as cleaner.
3 - Keep out of water.Water on/in the LCD may cause electrical short or corrosion. Please wipe out dry or water carefully.
4 - Prevent swift Temperature & Humidity change.
Instantaneous temperature and/or humidity change can make dew or ice which cause nonconformance such as malfunction.
5 High temperature & high humidityreduce the life-time.
LCD is not proper to be used at high temperature and high humidity. Please keep specifiedtemperature and humidity condition.
6 - Keep out of Corrosive Gas.
Corrosive gas effect the polarizer and the circuit chemically and cause defects accordingly.
7 - Electrostatic discharge can make Damage
There are electro-static sensitive components such as CMOS in LCD Module. Please earth human body when handle the LCD.In addition, please do not touch the interface connector pin with bare.
8 - Do not operate for a long time under the same pattern
Operating LCD for a long time under the same pattern can cause image persistence and can damage it. Please follow following guidance.1. Turn the power off when do not use. 2. Change the pattern periodically.
GENESIS GM5221 LCD TV CONTROLLERThe gm5221 is an LCD TV controller supporting resolutions up to SXGA (1280x1024). The gm5221
leverages Genesis patented advanced image-processing technology as well as a proven integrated
ADC/PLL and an Ultra-Reliable DVI™ compliant digital receiver to provide excellent image quality.
gm5221 also integrates a microcontroller, an OSD controller, advanced color management and dual
LVDS transmitters.
1.1 gm5221 System Design Example
Figure 1 below shows a typical dual interface LCD TV system based on the gm5221. Designs based on
the gm5221 have reduced system cost, simplified hardware and firmware design and increased reliability
because only a minimal number of components are required in the system.
TUNERPACK
VIDEODECODER
AUDIOPROCESSOR
gm5221
LCD
DISPLAY
AUDIOAMPL
V CHIP
VGA
DVI
YPbPr
MUX
IR KEY BOARD
EEPROM
SVIDEO
CVBS
Figure 1. gm5221 System Design Example
1.2 gm5221 Family Features
Intelligent Image Processing™ Fully programmable zoom ratios High-quality shrink capability from UXGA resolution Programmable coefficients for variable sharpness control RealRecovery™ provides full color recovery image forrefresh rates higher than those supported by the LCD panel
Analog RGB Input Port Supports SDTV RGB inputs in interlaced mode Supports EDTV (480p) up to 1080i HDTV inputs Supports mid level clamp for YPbPr inputs Macro vision decoding Supports up to 162 MHz (SXGA 75Hz / UXGA 60Hz) On-chip high-performance PLLs (single reference crystal required) Composite-sync, Sync-on-Green (SOG) and Sync-on-Y (SoY) support Input format detection Phase and image positioning
Ultra-Reliable DVI-Compliant Input Port Operating up to 165 MHz (up to UXGA 60Hz) Direct connect to all DVI 1.0-compliant transmitters High-bandwidth Digital Content Protection (HDCP) Note: HDCP function is available H version only.
CCIR-656 8-bit Video Input Port Supporting NTSC / PAL interlaced and progressive Direct connect to commercially available video decoders Spatial de-interlacing
Advanced Color Management Programmable gamma correction (CLUT) TV color controls including hue and saturation controls Full color matrix allows end-users to experience the same colors as viewed on CRTs and other displays (e.g. sRGB compliance)Advanced Active Color Management ™ (ACM-II) provide flesh-tone compensation and image enhancement for video preset modes like sport, nature . Adaptive Contrast and Color™ (ACC) ensures full dynamic range is used in video content
On-chip Versatile OSD Controller On-chip RAM for high-quality programmable menus 1, 2 and 4-bit per pixel character cells Horizontal and vertical stretch of OSD menus Blinking, transparency and blending Supports two independent OSD menu rectangles Proportional fonts
Embedded X86 On-chip Microcontroller High-performance X86 MCU with on-chip RAM and ROM External parallel ROM or serial SPI ROM interface Unified memory architecture simplifies chip programming 23 general-purpose inputs/outputs (GPIOs) available 2-wire serial bus master to control NVRAM, video decoder Two DDC2Bi ports with DMA buffer to internal RAM Four PWM outputs for analog backlight control, audio, etc. General-purpose ADC’s for keypad and temperature sensing Integrated reset circuit Slow clock mode for 50mW sleep mode power consumption JTAG debug / ICE support for firmware debugging
Built-in Test Pattern Generator Simplifies manufacturing / test
Energy Spectrum Management (ESM™) Digital clock spectrum management Eliminates EMI suppression components and shielding
Built-in LVDS Transmitters Four channel 6/8-bit LVDS transmitter Support for 8 or 6-bit panels with high-quality dithering Single / double wide up to SXGA 75Hz output Pin swap, odd / even swap and red / blue group swap of RGB outputs for flexibility in board layout
Highly integrated System-on-a-Chip All system clocks synthesized from a single external crystal 50mW power saving mode 5-Volt tolerant inputs Two Layer PCB support On-chip reset feature to eliminate external reset component Integrated Schmitt trigger for HSYNC and VSYNC
PACKAGE 208-pin PQFP 3.3V IO and 1.8V core power supplies
2 gm5221 Pinout The gm5221 devices are packaged in a 208-pin Plastic Quad Flat Pack (PQFP).
N/C
N/C
DC
LKJT
AG_R
ESET
RES
ERVE
DR
ESER
VED
RES
ERVE
DR
ESER
VED
RES
ERVE
DR
ESER
VED
RES
ERVE
DJT
AG_T
DO
RES
ERVE
DJT
AG_T
DI
PP
WR
PBIA
SG
PIO
15R
ESER
VED
HO
ST_S
CL/
UAR
T_D
IH
OST
_SD
A/U
ART_
DO
RVD
D_3
.3C
RVS
SC
VDD
_1.8
CR
VSS
DD
C_S
CL_
VGA
DD
C_S
DA_
VGA
DD
C_S
CL_
DVI
DD
C_S
DA_
DVI
GPI
O0
GPI
O1
GPI
O2
GPI
O3
GPI
O4
CVD
D_1
.8C
RVS
SG
PIO
5G
PIO
6G
PIO
7/IR
Qin
GPI
O8/
IRQ
out
GPI
O9/
SCL
GPI
O10
/SD
AC
RVS
SR
VDD
_3.3
CVD
D_1
.8C
RVS
SG
PIO
11/P
WM
0G
PIO
12/P
WM
1G
PIO
13/P
WM
2G
PIO
14/P
WM
3G
PIO
16/V
DAT
A7G
PIO
17/V
DAT
A6 N/C
ROM_DATA3ROM_DATA2ROM_DATA1ROM_DATA0
ROM_OEnROM_WEnROM_CSn
CRVSSCVDD_1.8
RESERVEDAVDD_LV_E_3.3
AVSS_LV_ECH3P_LV_E/ER0CH3N_LV_E/ER1CLKP_LV_E/ER2CLKN_LV_E/ER3CH2P_LV_E/ER4CH2N_LV_E/ER5CH1P_LV_E/ER6CH1N_LV_E/ER7CH0P_LV_E/EG0CH0N_LV_E/EG1
AVSS_LV_EAVDD_LV_E_3..3
AVSS_LVAVDD_LV_3.3
AVDD_LV_O_3.3AVSS_LV_O
CH3P_LV_O/EG2CH3N_LV_O/EG3CLKP_LV_O/EG4CLKN_LV_O/EG5CH2P_LV_O/EG6CH2N_LV_O/EG7CH1P_LV_O/EB0CH1N_LV_O/EB1CH0P_LV_O/EB2CH0N_LV_O/EB3
AVSS_LV_OAVDD_LV_O_3..3
CVDD_1..8CVSS
EB4EB5EB6EB7DENDHSDVS
RVDD_3.3CRVSS
N/C
53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
101
102
103
104
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152
156155154153152151150149148147146145144143142141140139138137136135134133132131130129128127126125124123122121120119118117116115114113112111110109108107106105
AGND_ADCRESERVEDAVDD_ADC_3.3AGND_REDRED-RED+AVDD_RED_3.3AGND_GREENGREEN-GREEN+SOG_MCSSAVDD_GREEN_3.3AGND_BLUEBLUE-BLUE+AVDD_BLUE_3.3CRVSSCVDD_1.8RESERVEDVDD_RXPLL_1.8GND_RXPLLRESERVEDAVDD_RXC_3.3RXC-RXC+AGND_RXCAVDD_RX0_3.3RX0-RX0+AGND_RX0VDD_RX0_1.8AVDD_RX1_3.3RX1-RX1+AGND_RX1VDD_RX1_1.8AVDD_RX2_3.3RX2-RX2+AGND_RX2VDD_RX2_1.8AGND_IMBREXTAVDD_IMB_3.3VCLKGPIO23/VDATA0GPIO22/VDATA1GPIO21/VDATA2GPIO20/VDATA3GPIO19/VDATA4GPIO18/VDATA5N/C
208
207
206
205
204
203
202
201
200
199
198
197
196
195
194
193
192
191
190
189
188
187
186
185
184
183
182
181
180
179
178
177
176
175
174
173
172
171
170
169
168
167
166
165
164
163
162
161
160
159
158
157
RO
M_D
ATA4
RO
M_D
ATA5
CR
VSS
RVD
D_3
.3R
OM
_DAT
A6R
OM
_DAT
A7R
OM
_AD
DR
0R
OM
_AD
DR
1R
OM
_AD
DR
2R
OM
_AD
DR
3R
OM
_AD
DR
4R
OM
_AD
DR
5R
OM
_AD
DR
6R
OM
_AD
DR
7R
OM
_AD
DR
8R
OM
_AD
DR
9R
OM
_AD
DR
10C
RVS
SR
VDD
_3.3
RO
M_A
DD
R11
RO
M_A
DD
R12
RO
M_A
DD
R13
RO
M_A
DD
R14
RO
M_A
DD
R15
RO
M_A
DD
R16
RO
M_A
DD
R17
VSYN
CH
SYN
C/C
SYN
CC
RVS
SC
VDD
_1.8
RES
ETn
LBAD
C_G
ND
LBAD
C_R
ETU
RN
LBAD
C_I
N3
LBAD
C_I
N2
LBAD
C_I
N1
LBAD
C_V
DD
_3.3
AVD
D_R
PLL_
3.3
TCLK
XTAL
AGN
D_R
PLL
RES
ERVE
DVD
D_R
PLL_
1.8
GN
D_R
PLL
VDD
_AD
C_1
.8G
ND
_AD
CN
/CN
/CN
/CN
/CN
/CN
/C
Figure 2. gm5221 Pin Out Diagram
VCTI
Analog Tuner
SAW
LVDS / TTL
Backlight
LCD Panel
Audio Amp.
Scaler
AV1
AV2
RGB
Primary Side
Inverter Side
Power Supply (12V & 5V )
Internal Voltage Regulators
3.3V,1.8V
3.3V5V-33V converter
5V / 1.5 A
33V
Block Diagram with L.I.P.S.
12V/ 700mA
BLOCK DIAGRAM OF GENESIS IC AND PERIPHERALS
U20
0 G
M52
21-1
GEN
ESIS
LC
D T
V C
ON
TRO
LLER
RESET Q
RGB-G
HS/VS-G
KEYBOARD
IR INPUT
U201 EEPROM24LC16
U203SERIAL FLASH
25VF040
SCART1 PIN 8
SCART2 PIN 8
STANDBY
STANDBY 2
24 BIT RGB OUTPUTTO LVDS INTERFACE
HS/VS
PANEL CTRL
DE
CLOCK
PANEL EN
LED
LED 2
S1-MAIN-SW
PC-SD-SW
MEMORY CARD-RCA SW
RCA-S2-SW
BACKLIGHT-EN
BRT-ADJ.
PANEL PWR
BACK LIGHTCONNECTOR
MUTE S202 SWUPDATE CONN.
UART RX/TX
VCT 49xxIVolume 1: General Description
General Description
1. Introduction
The VCT 49xxI is an IC family of high-quality single-chip TV processors. Modular design and deep-submi-cron technology allow the economic integration of fea-tures in all classes of single-scan TV sets. TheVCT 49xxI family is based on functional blocks con-tained and approved in existing products likeDRX 396xA, MSP 34x5G, VSP 94x7B, DDP 3315C,and SDA 55xx.
Each member of the family contains the entire IF,audio, video, display, and deflection processing for 4:3and 16:9 50/60-Hz mono and stereo TV sets. The inte-grated microcontroller is supported by a powerful OSDgenerator with integrated Teletext & CC acquisitionincluding on-chip page memory.
Fig. 1–1: Single-chip VCT 49xxI
1.1. Features
The VCT 49xxI family offers a rich feature set, cover-ing the whole range of state-of-the-art 50/60-Hz TVapplications.
– PSSDIP88-1/-2 package
– Submicron CMOS technology
– Low-power standby mode
– Single 20.25-MHz reference crystal
– 8-bit 8051 instruction set compatible CPU
– Up to 256 kB on-chip program ROM
– WST, PDC, VPS, and WSS acquisition
– Closed Caption and V-chip acquisition
– Up to 10 pages on-chip teletext memory
– Multi-standard QSS IF processing with single SAW
– FM Radio and RDS with standard TV tuner
– TV-sound demodulation:• all A2 standards• all NICAM standards• BTSC/SAP with MNR (DBX optional)• EIA-J
– Baseband sound processing for loudspeaker chan-nel:• volume• bass and treble• loudness• balance• spatial effect (e.g. pseudo stereo)• Micronas AROUND (virtual Dolby optional)• Micronas BASS
– CVBS, S-VHS, YCrCb and RGB inputs
– 4H adaptive comb filter (PAL/NTSC)
– multi-standard color decoder (PAL/NTSC/SECAM)
– Nonlinear horizontal scaling “panorama vision”
– Luma and chroma transient improvement (LTI, CTI)
– Non-linear color space enhancement (NCE)
– Dynamic black level expander (BLE)
– Scan velocity modulation output
– Soft start/stop of H-drive
– Vertical angle and bow correction
– Average and peak beam current limiter
– Nonlinear and dynamic EHT compensation
– Black switch off procedure (BSO)
Video & Sound IFDRX 396xA
Audio ProcessingMSP 34x5G
Video ProcessingVSP 94x7B
Control, OSD, TextSDA 55xx
Display & DeflectionDDP 3315C
VCT 49xyI
Fig. 1–2: Block diagram of the VCT 49xxI
XTAL1
IFFrontend
Slicer
VideoBackend
IFProcessor
SoundDemodulator
AudioProcessor
DisplayGenerator
BusArbiter
20kB XRAM256kB
Prog ROMClock
Generator
Reset & TestLogic
I2C Master/Slave
24kBChar ROM TEST
RESETQ
XTAL2
I2C
Pxy
CVBS in
IFIN-
IFIN+
TA
GC
SIF
YCrCb in
CVBS out
RGB in
AO
UT
SP
EA
KE
R
RGB out
SVM
RGB in
SENSE
RSW
VERT
EW
HOUT
PROT
HFLB
PanoramaScaler
Display &DeflectionProcessor
TimerCRTPWMADC
UARTWatchdog
RTC
I/O-PortsMemoryInterface
ADB, DB, PSENQ,PSWEQ, WRQ, RDQ
CPU8051
AIN
VideoFrontend
ColorDecoder
ComponentInterface
CombFilter
VC
T49
xyI
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
25
26
27
28
29
30
31
32
33
34
35
36
24
38
44
43
42
41
40
39
37
GOUT
GINBIN
SVMOUT
RINFBIN
VRDXREF
VSUP3.3BEGND
BOUT
ROUT
VSUP3.3IOGND
HFLBHOUT
SAFETY
VPROT
GNDDACVSUP3.3DAC
SDASCL
P21 / PWMV
P17P20 / DFVBL
P16P15P14P13P12
P11
VSUP3.3FEGND
GNDMSENSE
GNDVSUP5.0BE
TESTVERT+VERT-
EWRSW2RSW1
P10
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
64
63
62
61
60
59
58
57
56
55
54
53
65
51
45
46
47
48
49
50
52
SIF / AIN1R
RESETQ
TAGCVREFIF
VREFAUSPEAKERL
VSUP5.0IF
XTAL2
VSUP3.3DIGGND
IFIN-
GNDIF
VSUP1.8DIGGND
XTAL1
VIN11
VIN9VIN10
VIN7VIN8
VIN6VIN5VIN4VIN3
VIN1VIN2
P22P23
VOUT1VOUT2VOUT3VSUP1.8FEGND
SPEAKERRAOUT1L
GNDVSUP8.0AU
AIN1LAIN2RAIN2LAIN3R / AOUT2RAIN3L / AOUT2LAOUT1R
IFIN+