Serital St 410 en 2013
-
Upload
nikos-kasimatis -
Category
Documents
-
view
217 -
download
0
Transcript of Serital St 410 en 2013
-
8/13/2019 Serital St 410 en 2013
1/2
SERITAL ST 410
FIELD OF APPLICATION METHOD OF USE
ADVANTAGES
SUBSTRATE CONDITION
The application surface must be dry (substrate humidity
-
8/13/2019 Serital St 410 en 2013
2/2
For a smooth substrate, consumption is about 200-250 gr SERITAL2
ST 410 per m per layer depending on the nature of the substrate inorder to achieve 150 m/layer dry.
CONSUMPTION
CLEANING
All tools are cleaned with DOMOPLAN CLEANER.
For more information please contact our Technical Department.
Non toxic Toxicity May cause irritation in contact
with skin during its application
Chemical Resistanceo
Alkaline: Resistance to 50% (50 C)Acid: Resistance to 10%
APPLICATION
The mixed SERITAL ST 410 is applied on the well prepared
substrate by roll, brush or airless spraying machine.
SERITAL ST 410 is applied in two layers. The second layer should
be applied crosswise once the first layer is completely dry.
After the end of the works, all tools are cleaned with a special
solvent.
Component : pails of 4 kgComponent : pails of 1 kg
Light grey Dark grey Beige
Other colors available on request.
SERITAL ST 410 is stored in a cool and dry place for 24 months, in its
original packing at 20 C.
PACKING
COLORS
STORAGE
DOMISSIMA S.A.th
30 km. Thessaloniki - N. Moudanion Road,P.O.Box 306, GR 630 80, Lakkoma Chalkidiki,
Tel.: +30 23990 20320, Fax : +30 23990 20323www.domissima.gr, E-mail:[email protected]
DOMISSIMACHEMIC L BUILDING M TERI LS SPECI L CONSTRUCTIONS
TECHNICAL CHARACTERISTICSCOMPONENT A COMPONENT B
Form Paste Liquid
Mixing ratio on weight 4 parts A 1 partBCOMPONENT + after mixing/hardening)
Specfic weight 1,45 +/- 0,02 kg/lt
oWalkability After 16 h at 20 C
Solids 97%
oFull hardening at 20 C 5 days
Theoretical spreading rate 6,5 m/lt for 150 m dry
oFinal stength at 20 C 14 days
3,25 m/lt for 300 m dry
o Pot life 30 min. at 20 C
Gloss level satin gloss
o oApplication temperature +5 C to 40 C
Typical thickness 150/300 m dry
Abrasion resistance 70 mg (CS 10/1000/1000)(DIN 53 109 Taber Test) (8 days/+23C)
Adhesion to concrete (ISO 4624) >1.5 N/mm (break in concrete)
SERITAL ST 410