Series SKD - Saylite · Series SKD Item Number Dimensions Lamping SKD48L44W3025L4000K 22.5”l X...
2
FEATURES & SPECIFICATIONS INTENDED USE Full body micro silhouette makes a bold statement with a minimal design in brushed nickel powder coated finish (consult factory for other finishes). Scaled to the T5 lamp the matte white diffuser surrounds the lamps for soft lighting. Brushed nickel fixture can be surface mounted on wall or ceiling or pendant mounted with specially engineering cable mounting kit. SIZE L x W x D in inches 1 Light - 22.5” or 34.5” or 46”L x 2”W x 2.6”D* 2 Light - 22.5” or 34.5” or 46”L x 3”W x 3”D* LAMP 1 or 2 lamp position. MOUNTING Surface mount or Pendant mount. Horizontal or Vertical. MATERIALS & FEATURES LISTING Fixture and Ballast: UL Listed. TYPICAL OPTIONS AND ACCESSORIES Whips, fuses, and cord sets. See options page at the end of the T02Strip section, or contact factory for more details. Series SKD Low Profile T5 Surface Mount ORDERING INFORMATION Example: SKD 128 E120 SKD E120 1 Series Ballast & Voltage [1] Options [1] Lamp Count Lamp Type [1] & Tandem Code [2] E120 Electronic, 120V E277 Electronic, 277V MV Electronic, Multivolt (120-277) S Residential Electronic SKD Low Profile T5 Surface Mount WP 6 ft. 3 wire 18 gauge whip CS 8ft. 3/18 3 prong (5-15P) cord & plug D Ballast Disconnect [2] Tandem doubles length and lamp count. Same lamps in cross section, additional lamps end to end. Notes 1, 2 14, 24 1, 2 21, 39 1, 2 28, 54 14W T5 Fixture Length = 21.62 in. 21W T5 Fixture Length = 33.38 28W T5 Fixture Length = 45.25 in. 28 (Lamps not included) • Fully assembled housing is formed and welded, 22 gauge steel, chemically treated to resist corrosion and enhance paint adhesion • Available in brushed nickel. Consult for other finishes • Available with smooth frosted lens • Clean body - Knock-outs for through wiring • Knock-outs on back and ends accept standard electrical fittings (by others) Consult factory for other locations • Available for one T5 14W, 21W or 28W - or 21W, 24W or 54W HO linear fluorescent lamps • Standard 120V residential electronic ballast is pre-wired to the lamp holders (consult factory for other voltage options and multi-volt commercial) • Dimming and emergency battery back up options available (consult factory for availability and stystem compatibility) • UL and C-UL listed for dry and damp locations DKS-HC501BN - 4’ Cable Mounting Kit** **Includes canopy for cable only and a canopy for cable & power chord. LAMP *Consult for Tandem. 8ft. Tandem (Double lamp count) 8 Catalog Number: Notes: Saylite 2055 Luna Rd. Suite 142 Carrollton, TX 75006 Phone: 972-247-3171 Fax: 972-247-0200 www.saylite.com emaiil: sales@saylite.com
Transcript of Series SKD - Saylite · Series SKD Item Number Dimensions Lamping SKD48L44W3025L4000K 22.5”l X...
FEATURES & SPECIFICATIONSINTENDED USEFull body micro silhouette makes a bold statement with a minimal design inbrushed nickel powder coated finish (consult factory for other finishes). Scaled tothe T5 lamp the matte white diffuser surrounds the lamps for soft lighting. Brushednickel fixture can be surface mounted on wall or ceiling or pendant mounted withspecially engineering cable mounting kit.
SIZE L x W x D in inches1 Light - 22.5” or 34.5” or 46”L x 2”W x 2.6”D*2 Light - 22.5” or 34.5” or 46”L x 3”W x 3”D*
LAMP1 or 2 lamp position.MOUNTINGSurface mount or Pendant mount. Horizontal or Vertical.
MATERIALS & FEATURES
LISTINGFixture and Ballast: UL Listed.
TYPICAL OPTIONS AND ACCESSORIESWhips, fuses, and cord sets. See options page at the end of the T02Strip section, or contact factory for more details.
Series SKDLow Profile T5 Surface Mount
ORDERING INFORMATION Example: SKD 128 E120
SKD E1201
Series Ballast & Voltage [1]
Options [1]
Lamp Count Lamp Type [1] & Tandem Code [2]
E120 Electronic, 120VE277 Electronic, 277VMV Electronic, Multivolt (120-277)S Residential Electronic
SKDLow Profile T5Surface Mount
WP 6 ft. 3 wire 18 gauge whip CS 8ft. 3/18 3 prong (5-15P) cord & plugD Ballast Disconnect
[2] Tandem doubles length and lamp count. Same lamps in cross section, additional lamps end to end.
Notes
1, 2 14, 24 1, 2 21, 39 1, 2 28, 54
14W T5 Fixture Length = 21.62 in. 21W T5 Fixture Length = 33.38 28W T5 Fixture Length = 45.25 in.
28
(Lamps not included)
• Fully assembled housing is formed and welded, 22 gauge steel, chemicallytreated to resist corrosion and enhance paint adhesion
• Available in brushed nickel. Consult for other finishes• Available with smooth frosted lens• Clean body - Knock-outs for through wiring• Knock-outs on back and ends accept standard electrical fittings (by others)Consult factory for other locations
• Available for one T5 14W, 21W or 28W - or 21W, 24W or 54W HO linearfluorescent lamps
• Standard 120V residential electronic ballast is pre-wired to the lamp holders(consult factory for other voltage options and multi-volt commercial)
• Dimming and emergency battery back up options available (consult factory foravailability and stystem compatibility)
• UL and C-UL listed for dry and damp locations
DKS-HC501BN - 4’ Cable Mounting Kit**
**Includes canopy for cable only and a canopy for cable & power chord.
LAMP
*Consult for Tandem.
8ft. Tandem (Double lamp count)
8
Catalog Number:
Notes:
Saylite2055 Luna Rd. Suite 142 Carrollton, TX 75006Phone: 972-247-3171 Fax: 972-247-0200www.saylite.com emaiil: [email protected]
HOTWD Series
Series SKD
Item Number Dimensions LampingSKD48L44W3025L4000K 22.5”l X 3”w X 3” Dp 96 LEDS, 224W, 1565 LUMENS, 4000KSKD48L44W3025L4000K 46”L X 3”W X 3”Dp 192 LEDS, 44W, 3025 LUMENS, 4000K
LED version available in 2’ and 4’ Sizes
Catalog Number:
Notes:
Saylite2055 Luna Rd. Suite 142 Carrollton, TX 75006Phone: 972-247-3171 Fax: 972-247-0200www.saylite.com emaiil: [email protected]
