SERIES SI7000 PRODUCT DATA SHEET WINDOW SYSTEMS · For Tilt Turn Windows Crank Dyad Operator For...
Transcript of SERIES SI7000 PRODUCT DATA SHEET WINDOW SYSTEMS · For Tilt Turn Windows Crank Dyad Operator For...
solarinnovations.com | 800 618 0669 | 31 Roberts Road, Pine Grove, PA 17963 | Rev 10.15.20
PANELS:• Systems include fixed, casement, awning, tilt turn, tilt slide,
hopper, and egress windows• Mulled options available• Consistent sightlines within systems• LEED friendly system including recycled content• Designed and manufactured in the U.S.A.
PERFORMANCE:• Thermally enhanced aluminum profiles• Test results may be available upon request
HARDWARE:• Large variety of hardware options• Heavy salt water resistant finishes available
A breath of fresh air With a broad range in window operations — from fixed to tilt turn — Solar Innovations® Window Systems offer countless custom configurations to enhance any living space. The thermally broken aluminum profiles have exceptional thermal performance, creating a comfortable environment in all temperature extremes. In addition, aluminum windows will not rust, rot, warp, or need constant finish maintenance. These systems can be incorporated into almost any glass structures, houses, hotels, storefronts, and restaurants, just to name a few applications.
FINISHES:• Standard finishes:
• AAMA 2603: Bronze, White• AAMA 611 Class I Anodized: Clear, Dark Bronze
• Designer finishes:• AAMA 2603: Hartford Green, Black
Natural Clay, Sandstone• Custom finishes:
• Powder coat finish: AAMA 2604 - 2605• Fluoropolymer (50% or 70%): AAMA 2604 - 2605• Wood veneer, metal cladding, and foiling options• Dual color or dual finish options
ACCESSORIES:• Decorative interior & exterior grids• Fixed mesh insect screens• In-system frame flanges, snap-in nailing fins, or slide-on
nailing flanges
FEATURES OPTIONS
WINDOW SYSTEMSSERIES SI7000 PRODUCT DATA SHEET
solarinnovations.com | 800 618 0669 | 31 Roberts Road, Pine Grove, PA 17963 | Rev 10.15.20
Hinges
Surface MountCam Lock
Prima HandleFor Tilt Turn Windows
Crank Dyad OperatorFor Casement Windows
Split Arm OperatorFor Awning Windows
Four Bar Egress Hinge
HARDWARE
A: Handles
B: Locks
Additional handle styles and finishes available upon request. Non-standard handle options may increase lead times and/or cost.
Standard Single & Multi PointCam Locks
Dependent on size of the window
Folded HandleFor Awning and Hopper
Windows
Standard Pole Operator Cam Handle
For Hopper Windows
Four Bar Hinge
A
B
Please Note: All hardware is subject to vendor availability. Custom finishes may be available upon request at additional lead time and/or cost. Solar Innovations® reserves the right to discontinue any hardware option at any time. Please be sure to visit our website for additional product information: www.solarinnovations.com
CASEMENTAll Window SystemsOutswing Casement Only in
Projected System
AWNINGAll Window Systems
HOPPERAll Window Systems
except Projected
FIXEDAll Window Systems
TILT TURNInternational Window Systems
CONFIGURATIONS
solarinnovations.com | 800 618 0669 | 31 Roberts Road, Pine Grove, PA 17963 | Rev 10.15.20
GRID OPTIONS
Low Profile Gridwith SDL
Low profile grids can be used on all systems. Colonial, Ogee, and Traditional grids cannot be used on sliding glass doors, windows, or walls. Please visit solarinnovations.com for additional decorative options.
English GridArched Grid Gothic Grid Double Gothic Grid
Traditional Grid
Cross Grid Interior MuntinGrid on Insulated
Glass
FINISH OPTIONS
SI Bronze
SI Bronze
SI White
SI White
Class I Clear Anodized
Dark Bronze Anodized
Paint STANDARD - AAMA 2603 (5 year warranty). Finishes available while in stock.
Paint DESIGNER - AAMA 2604 (5 year warranty), AAMA 2605 (10 year; up to 20 year warranty). Scratch & fade resistant; contains no VOCs.*
SI Sandstone
SI Sandstone
SI Black
SI Black
SI Natural Clay
SI Natural Clay
SI Hartford Green
SI Hartford Green
Copper Rheinzink Bright Rolled
Rheinzink Blue Gray
Rheinzink Graphite Gray
Brass#4 Polished Stainless Steel
Bronze
Metal Clad STANDARD* Metal Clad DESIGNER*
Anodized Additional cost
Dark Walnut 1802
DS 733 TexturedDS 403 Smooth
Knotty Pine 2103
DS 716 TexturedDS 402 Smooth
Acacia 1001DS 716 TexturedDS 402 Smooth
Acacia 1001DS 733 TexturedDS 403 Smooth
Douglas Fir 1501
DS 716 Textured DS 402 Smooth
Cherry 1402DS 716 TexturedDS 402 Smooth
Oak Assi 2501DS 733 TexturedDS 403 Smooth
Cherry 1402DS 733 TexturedDS 403 Smooth
Teak 2601DS 706 TexturedMahogany Finish
Decoral Finishes (Powder Coat)*
National Walnut 1806DS 706 TexturedMahogany Finish
Copper
BurgundySRSL 62487FRSL 62496
Bone White
SRSL 82520FRSL 82909
Fashion Gray
SRSL 74008FRSL 74652
Colonial Gray
SRSL 74009FRSL 74653
Apollo White
SRSL 82519FRSL 82908
IvorySRSL 45891FRSL 46646
Hartford Green
SRSL 32545FRSL 32872
SandstoneSRSL 45892FRSL 46647
SeawolfSRSL 46636FRSL 46645
BlackSRSL 11386FRSL 11390
Antique Bronze
SRSL 45893FRSL 46648
Military Light Blue
SRSL 21708FRSL 21709
Champagne
CharcoalSRSL 74007FRSL 74654
Pewter
Powder Coat Solids AAMA 2604 (10 year warranty), AAMA 2605 (10 year; up to 20 year warranty). Scratch & fade resistant; contains no VOCs.*
Powder Coat Metallics AAMA 2604, AAMA 2605*
Silver Sparkle
Note: Depending upon color selection, additional charges and increased lead times may apply. Extended warranties and service plans are available for an additional charge. Examples are shown as accurate as photography and printing processes allow. Final finish selection should be made from a physical sample; contact Solar Innovations® for samples. Product and finish options are subject to vendor availability. Solar Innovations® reserves the right to discontinue any option at any time without notice. Additional options, including custom color match, are available; contact Solar Innovations® for details. FSC options available.
White Ash Hard MapleRed Oak White Oak Douglas Fir Cherry Sapele Mahogany Walnut
Wood/Glulam DESIGNER*Wood/Glulam STANDARD*
White Oak Ponderosa (White) Pine Pecan Pine
Wood Veneering (Unfinished) STANDARD* Wood Veneering (Unfinished) DESIGNER*
CherryHonduran Mahogany
Douglas Fir Walnut
*Adds one to three weeks to lead time.
solarinnovations.com | 800 618 0669 | 31 Roberts Road, Pine Grove, PA 17963 | Rev 10.15.20
Operable window options include casement windows that are cranked open either left or right or awning windows that are hinged at the top and push outward to open. Projected windows allow for further customization and ventilation when incorporated as an in-system window in a Solar Innovations® custom glass structure. The projected window system is an ideal solution for both commercial and residential applications when mulling is not desired and is engineered specifically for out-swing applications.
PROJECTED WINDOW SYSTEMS
Head & Sill Details Casement Jamb Details
Product Overview
• Available in awning, casement, & fixed• 2 13/16″ frame depth• Thermally broken utilizing thermal fill & debridge• In-system frame flange• Minimum panel size: 2' x 2' operable, 1' x 1' fixed; smaller panels
may be available upon engineering approval • Maximum panel size up to 4' x 7' pending hardware limitations
Features
Head Detail
Sill Detail
Head Detail
Sill Detail
Head Detail
Sill Detail
Casement Fixed
213/16" 227/32"
41/2" 71/32" 41/2"
41/4
"
43/1
6"
45/8
" 43/4
"
213/
16"
solarinnovations.com | 800 618 0669 | 31 Roberts Road, Pine Grove, PA 17963 | Rev 10.15.20
The Mulled Window System can be a combination of fixed panels and operable windows in one unit. Solar Innovations®’ Mulled Window system can be composed of any number of fixed, awning, hopper, and casement windows. Unlike the systems of many other manufacturers, Solar’s window system can include both inswing and outswing windows in one structure, creating a truly unique and customizable system. The Mulled Window system is also NFRC certified.
Features• Awning, hopper, casement, &
fixed windows• 3 ¾″ frame depth• Thermally enhanced utilizing
thermal strut
MULLED WINDOW SYSTEMS
Product Overview
• Designed to accommodate monolithic laminated, and insulated glazing infills of 3/16″ to 1½″
• Minimum panel size: 2' x2' operable, 1' x 1' fixed; smaller panels may be available upon engineering approval
• Maximum Panel size up to 4' x 7' pending hardware limitations; larger panel options may be available depending on application
Panels Glazing• Water performance up to 15psf (fixed),
depending on configuration, and water column
• Higher design pressure ratings available with engineering approval
• Test results available upon request
Performance
NFRC Certified U-Values(BTU/HR/ft2/oF)
Casement 0.45
Fixed 0.38
Awning 0.46
LoE 272 / Clear
GLASS MAKE-UPWINDOW
TYPE
PANELSIZE
Mulled Air & Structure Impact Testing
60” Hx 60” W 0.06 cfm/ft2 15 PSFFixed ± 80 PSF
DESIGNPRESSURE
OPERATION WATERPENETRATION
AIR INFILTRATIONAT 1.57 PSF (25MPH)
Please Note:Testing and performance results may vary depending upon sill, size, and hardware selections. Please be sure to visit our website at www.solarinnovations.com or contact your Solar Innovations® representative for additional product information.
solarinnovations.com | 800 618 0669 | 31 Roberts Road, Pine Grove, PA 17963 | Rev 10.15.20
Head & Sill Details
Awning Window
Awning Window
Casement Window
Casement Window
Fixed Window
Fixed Window
Hopper Window
Hopper Window
33/4" 33/4"
33/4"
33/4"
25/8"
33/4"
33/4"
25/8"
25/8"25
/8"
315/
16"
315/16"315/16"
217/
32"
217/32"217/32"
217/
32"
31/4
"
315/
16"
31/4
"
31/4" 31/4"
Learn More
To find out more about the features and options of our Window Systems, visit our website atsolarinnovations.com/window-systems/
Jamb Details
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
JambsHead Detail
Sill Detail
JambsHead Detail
Sill Detail
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
33/4"
33/4
"
33/4"
33/4"
315/
16"
315/16" 315/16"
315/
16"
33/4
"33
/4"
solarinnovations.com | 800 618 0669 | 31 Roberts Road, Pine Grove, PA 17963 | Rev 10.15.20
G1 INTERNATIONAL WINDOW SYSTEMS
Product OverviewThe G1 International Window System is a smaller version of Solar's existing mulled window system. The G1 Window System utilizes thermal strut technology to maximize thermal performance. Beveled exterior edges provide a more traditional look compared to the G2 and G3 Window Systems and their modern sightlines. This system is the best for use with traditional grid systems and two tone applications. Rounded glazing stop edges provide a more traditional look compared to the G2 and G3 window systems and their modern sightlines.
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
JambsHead & Sill Details Jamb Details
Fixed FixedCasement
Casement
25/8" 25/8"
219/32" 25/8"
31/4
"
17/8
"
31/4
"
17/8
"
25/8"
25/8"
25/8
"25
/8"
31/4"
17/8" 17/8"
31/4"
solarinnovations.com | 800 618 0669 | 31 Roberts Road, Pine Grove, PA 17963 | Rev 10.15.20
G2 INTERNATIONAL WINDOW SYSTEMS
Features• Awning, out-swing casement, hopper,
fixed, and tilt turn windows• 2⅝″ frame depth• Slide-on nailing flange - 2″ standard• Impact option available• Acoustical Testing• NFRC Certified
Product OverviewWith the ability to mull different operable or fixed windows together, G2 International Window Systems can provide a solution to almost any type of configuration imaginable while providing superior thermal and structural performance. This system utilizes fill and debridge technology. Casements, awnings, fixed, and hopper windows are all able to be incorporated into the same unit without requiring additional framing in this system. The G2 HP system can be used for creating large high performance tilt turn windows.
PANELSIZE
G2 Fixed Air and Structure Impact Testing
72” Hx 36” W
0.1 L/s/m2 0.01 L/s/m2 ± 65 PSF ± 65 PSF
UNIFORMLOAD
± 97.5 PSF
OVERLOAD
12.0 PSFBased on
Water Column
WATERAwning & Casement
15.0 PSFBased on
Water Column
WATERFixed
DESIGNPRESSURE
AIR AT6.24 PSF
AIR AT1.57 PSF
• Designed to accommodate monolithic laminated, and insulated glazing infills of 1”
• Minimum panel size: 2' x 2' operable, 1' x 1' fixed; smaller panels may be available upon engineering approval
• Maximum Panel size up to 4' x 7' pending hardware limitations; larger panel options may be available depending on application
Panels Glazing• Water performance up to 15psf (fixed),
depending on configuration and water column
• Higher design pressure ratings available with engineering approval
• Test results available upon request
Performance
Please Note:Testing and performance results may vary depending upon sill, size, and hardware selections. Please be sure to visit our website at www.solarinnovations.com or contact your Solar Innovations® representative for additional product information.
solarinnovations.com | 800 618 0669 | 31 Roberts Road, Pine Grove, PA 17963 | Rev 10.15.20
Framing Member Options
Head & Sill Details
Inswing Sash
Awning
Awning
HP Tilt Turn
HP Tilt Turn
Hopper
Hopper
Fixed
Fixed
Casement
Casement
Outswing Sash
FixedFrame
Inswing Sill
Head/Jamb Outswing Sill
Glazing Flange
Glazing Bead
HP Tilt Turn Frame
Tilt Turn Sash
25/8"25/8"25/8"25/8"25/8"25/8" 19/32" 25/8" 229/32"
125/
32"
23/8
"
5/8"15
/32"25
/32"
29/3
2"
Jamb Details
17/8
"
21/1
6"
21/1
6"
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
25/8" 25/8" 25/8" 25/8" 25/8"
25/8
"
25/8
"
25/8
"
25/8
"
25/8
"
25/8" 25/8"
25/8"
25/8" 25/8"
25/8"
25/8"
25/8"
25/8"
25/8"
31/8
"
31/8
"
31/8
"
313/
32"
2"2"
2"313/32"
31/8"
31/8"
31/8" 31/8"
31/8"
2"313/32"
31/8"
31/8
"
31/8
"
31/8
"
313/
32"
solarinnovations.com | 800 618 0669 | 31 Roberts Road, Pine Grove, PA 17963 | Rev 10.15.20
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
Head Detail
Sill Detail
Jambs
G3 INTERNATIONAL WINDOW SYSTEMS
Product OverviewG3 International Window Systems provide superior thermal offerings and capabilities by utilizing thermal strut. This technology allows for a dual color unit by separating the profiles into two individual pieces. It also provides a wide range of glazing thicknesses to conform to any application. The system can be used in awning, hopper, casement, fixed, and tilt turn windows.
Head & Sill Details Jamb Details
Awning AwningCasement
Casement
231/32" 231/32"
231/32" 231/32"
33/4
"
33/4
"
33/4
"
33/4
"
231/32"
231/32"
231/
32"
231/
32"
33/4"
33/4"
33/4"
33/4"