Acid Waste Floor Drain Submittal - Watts Water Technologies, Inc
Series NLF9 - Watts Water Technologies, Inc
1
For Health Hazard Applications ES-NLF9 Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor –––––––––––––––––––––––––––––––––––––––––––– Job Location –––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––– Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––– Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––– Series NLF9 Dual Check Vacuum Breakers for Laboratory Faucets Sizes: 3 ⁄ 8" and 3 ⁄ 4" (10 and 20mm) Series NLF9 Dual Check Vacuum Breakers for Laboratory Faucets are used for noncontinuous pressure, health hazard, applications and are backsiphonage backflow preventers. This series is specially made for laboratory faucets where portable hoses can be attached and prevent the flow of contaminated water back into the potable water supply. These vacuum breakers can be installed on new or existing faucets without plumbing changes. Pressure-Temperature Temperature Range: 33°F – 180°F (0.5°C — 82°C) Maximum Working Pressure: 150psi (10.3 bar) Applications NLF9 should be installed on every laboratory outlet where a hose can be attached. Its unique design provides full protection against all backsiphonage conditions. To prevent tampering, it is recommended that the NLF9 be secured to the laboratory faucet with Loctite. Use NLF9 for non-continuous pressure applications. NLF9 Hose Connection Combination Fixture Recommended Strainer Watts Model 27 NLF9 Laboratory Faucet Construction NLF9 is suitable for either hot or cold water service. It features brass construction and a primary check valve utilizing a soft disc which seats against a soft rubber mating part to ensure tight closing. A secondary check valve utilizes a soft disc-to-metal seating. NLF9 provides better-than-average flow rate and consequently lower pres- sure loss. Construction is brass body with polished chrome plating, stainless steel working parts and durable rubber diaphragm and disc. Standards B A B1 kPa psi 207 30 172 25 138 20 103 15 69 10 35 5 0 1 2 3 4 5 6 gpm 0 3.8 7.6 11 15 19 23 lpm Dimensions — Weights Capacity SIZE (DN) DIMENSIONS WEIGHT A B B1 in. mm in. mm in. mm in. mm lbs. kgs. 3 ⁄8 10 2 3 ⁄8 60 1 1 ⁄4 32 1 25 .38 .17 3 ⁄4 20 2 3 ⁄8 60 1 1 ⁄4 32 1 25 .38 .17 CSA B64.7 ASSE 1035 – “Laboratory Faucet Vacuum Breakers” Approvals ASSE CSA ES-NLF9 1322 © 2013 Watts USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold. A Watts Water Technologies Company
Transcript of Series NLF9 - Watts Water Technologies, Inc
For Health Hazard ApplicationsES-NLF9
Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––– Approval ––––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative –––––––––––––––––––––––––––––––––––––––––
Series NLF9
Dual Check Vacuum Breakers for Laboratory FaucetsSizes: 3⁄8" and 3⁄4" (10 and 20mm)Series NLF9 Dual Check Vacuum Breakers for Laboratory Faucets are used for noncontinuous pressure, health hazard, applications and are backsiphonage backflow preventers. This series is specially made for laboratory faucets where portable hoses can be attached and prevent the flow of contaminated water back into the potable water supply. These vacuum breakers can be installed on new or existing faucets without plumbing changes.
Pressure-TemperatureTemperature Range: 33°F – 180°F (0.5°C — 82°C) Maximum Working Pressure: 150psi (10.3 bar)
ApplicationsNLF9 should be installed on every laboratory outlet where a hose can be attached. Its unique design provides full protection against all backsiphonage conditions.To prevent tampering, it is recommended that the NLF9 be secured to the laboratory faucet with Loctite.Use NLF9 for non-continuous pressure applications.
NLF9
HoseConnection
Combination Fixture
Recommended Strainer Watts Model 27
NLF9
Laboratory Faucet
ConstructionNLF9 is suitable for either hot or cold water service. It features brass construction and a primary check valve utilizing a soft disc which seats against a soft rubber mating part to ensure tight closing. A secondary check valve utilizes a soft disc-to-metal seating. NLF9 provides better-than-average flow rate and consequently lower pres-sure loss. Construction is brass body with polished chrome plating, stainless steel working parts and durable rubber diaphragm and disc.
StandardsB
A
B1
kPa psi 207 30
172 25
138 20
103 15
69 10
35 5
0 1 2 3 4 5 6 gpm0 3.8 7.6 11 15 19 23 lpm
Dimensions — Weights
Capacity
SIZE (DN) DIMENSIONS WEIGHT
A B B1
in. mm in. mm in. mm in. mm lbs. kgs.3⁄8 10 23⁄8 60 11⁄4 32 1 25 .38 .173⁄4 20 23⁄8 60 11⁄4 32 1 25 .38 .17
CSA B64.7 ASSE 1035 – “Laboratory Faucet Vacuum Breakers”
Approvals
ASSE CSA
ES-NLF9 1322 © 2013 Watts
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.comCanada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
A Watts Water Technologies Company
