september10

september 2010

reVOLUtION perFOrmANCe“YOU CAN’T OUTRUN THE PHYSICS.” Aerospace-grade, all-aluminum cylinders with nickel-silicone-carbide electroplated bores, that means NO SLEEVING, allow for larger bore sizes and less friction to provide more horsepower, lower temps and longer life. The cylinders are offered as kits, so riders looking for premium performance only need to order ONE PART # to be out-running all of their competition.

PART # DESCRIPTION SUG. RETAIL124” KIts FOr 07-10 tWIN CAm AND 99-05 tWIN CAm WItH sCreAmIN’ eAGLe strOKer CrANK (4.250” bOre CYLINDers; 10.5:1 FLAt-tOp pIstONs)0903-07851 Silver $1,099.950903-07861 Black 1,099.95114” KIts FOr 99-06 tWIN CAm (4.250” bOre CYLINDers; 10.5:1 FLAt-tOp pIstONs)0903-0783 Silver 1,099.950903-0784 Black 1,099.95107” KIts FOr 99-06 tWIN CAm (3.938” bOre CYLINDers; 10.5:1 FLAt-tOp pIstONs)0903-0807 Silver 1,099.950903-0808 Black 1,099.951 Requires use of big bore carb or throttle body.

mONster bIG bOre KIts•Monster power in a package that’s tested, reliable and, most importantly, really big

•Full 4.250” bore is achieved using Revolution™ aerospace-grade, all-aluminum cylinders and nickel-silicon-carbide electroplating

•Includes Wiseco forged pistons with rings (that are specifically designed for optimal compatibility with Revolution Performance’s cylinders), wrist pins, circlips and high-performance head and base gaskets

•Available in two finishes: natural silver or black with highlighted fins•Replacement head and base gasket sets available separately; see 2010 FatBook

•Made in the U.S.A.

NOTE: All kits require case-boring.

PART # DESCRIPTION SUG. RETAIL85” KIt FOr 84-99 eVO bIG tWIN (3.563” bOre CYLINDers; 10.5:1 DOmeD pIstONs)0903-0780 Black $999.951250CC KIts FOr 04-10 XL 883/1200 (3.563” bOre CYLINDers; 10.3:1 FLAt-tOp pIstONs)0903-0781 Silver 999.950903-0782 Black 999.95

bOLt-ON bIG bOre KIts•True bolt-on kit that delivers major power with no machine work required

•Features Revolution™ aerospace-grade all-aluminum cylinders with nickel-silicon-carbide electroplated bores; provides a more oleophilic surface and higher wear resistance

•Also includes Wiseco forged pistons with rings (that are specifically designed for optimal compatibility with Revolution Performance’s cylinders), wrist pins, circlips and high-performance head and base gaskets

•Available in two finishes: natural silver or black with highlighted fins•Replacement head and base gasket sets available separately; see page 395 of the 2010 FatBook


0903-0785

0903-07840903-0780

0903-0781

LUG-DrIVe brAKe rOtOrs•Friction ring is CNC-machined from 420 high-carbon steel and fits flush with the CNC-machined 6061 T-6 billet aluminum carrier for the clean, uninterrupted look of a solid rotor with the performance of LRB’s line of full-floating, high-performance rotors

•Available with chrome-plated or black anodized carrier•For best results, use Lyndall Racing brake pads; see pages 833-834 of the 2010 FatBook for applications

•Sold each•Made in the U.S.A.

2

LYNDALL rACING brAKesPaul Kittrell, who founded Lyndall Racing Brakes back in 1998, is one of the most “hands-on” guys you will ever meet. He used his background in race car brakes to begin cutting his own pads from those same materials to use for his first love: motorcycle racing. Perfected on the racetrack, “The Future of Motorcycle Brakes” is now available to all V-Twin owners. Your customers will STOP back in to thank you.

DESCRIPTION

OMEGA

CHROME

OMEGA

BLACK

GEMINI

CHROME

GEMINI

BLACK

TRIANGULUM

CHROME

TRIANGULUM

BLACK SUG. RETAILFOr 00-10 mODeLs (eXCept 08-10 Dressers, V-rOD, sprINGers, 06-10 DYNA GLIDe FrONt)11.5” rotor, front 1710-0586 1710-0587 1710-0588 1710-0589 1710-0590 1710-0591 $369.9511.5” rotor, rear 1710-0592 1710-0593 1710-0594 1710-0595 1710-0596 1710-0597 369.95FOr 08-10 FLHt, FLHr, FLHX, FLtr mODeLs, 09-10 FL trIKe mODeLs (FrONt ONLY), 06-10 DYNA mODeLs (FrONt ONLY)11.8” rotor, front 1710-0598 1710-0599 1710-0600 1710-0601 1710-0602 1710-0603 369.9511.8” rotor, rear 1710-0604 1710-0605 1710-0606 1710-0607 1710-0608 1710-0609 369.95

PART # DESCRIPTIONSUG.

RETAILCHrOme0602-0398 1.7” $34.950602-0399 3.5” 39.950602-0400 5.5” 49.950602-0401 6.5” 54.950602-0402 8” 64.95


RETAILbLACK0602-0403 1.7” $34.950602-0404 3.5” 39.950602-0405 5.5” 49.950602-0406 6.5” 54.950602-0407 8” 64.95


RETAILCHrOme0602-0408 3.5” $39.950602-0409 4.5” 44.950602-0410 5.5” 49.950602-0411 6.5” 54.950602-0412 8.5” 64.95


RETAILbLACK0602-0413 3.5” $39.950602-0414 4.5” 44.950602-0415 5.5” 49.950602-0416 6.5” 54.950602-0417 8.5” 64.95

FOrGeD ALUmINUm HANDLebAr rIsers•These risers are forged from 6061 T-6 aluminum for superior strength

•Drilled and tapped for 1/2”-13 riser bolts (bolts sold separately)•CNC-machined for precision fit on handlebars with a 1” diameter clamping area•Designed to fit applications with 3.5” on-center mounts and will accept most OEM-style top clamps•Available in chrome or black finish•Sold in pairs

1710-0586 1710-0588

1710-0590

1710-0593

1710-0593A 1710-0595

1710-0597

0602-03980602-0399

0602-0401

0602-04070602-0408

0602-0409 0602-0416

0602-0417

strAIGHt rIsers pULLbACK rIsers (1” pULLbACK)

3

PART # DESCRIPTION SUG. RETAIL1861-0613 Heat shields for PART #s 1800-1213,

1800-1018 and 1800-1130 $169.95

PART # DESCRIPTION SUG. RETAIL1861-0616 Heat shields for PART #1800-1016 $169.951861-0617 Heat shields for PART #1800-1021 169.95

bLACK HeAtsHIeLDs FOr prO pIpe HI-OUtpUt•Heatshields help cut down on heat coming off of pipes, yet retain the great looks of the exhaust•Feature black ceramic coat finish, 21/2” diameter and 220° coverage over both stepped headers all the way down to the collector

PART # DESCRIPTION SUG. RETAILFOr 84-10 FLt/FLHt/FL trIKe, 86-10 FLst1621-0248 Driver floorboards $369.95FOr 87-10 FLt, FLst, FL trIKe1621-0249 Passenger floorboards 349.95

CONtOUr FLOOrbOArDs•Machined aluminum body with billet hinges and black finish•Foot-cushioning rubber pad•Sold in pairs•Made in the U.S.A.

CONtOUr reAr brAKe peDALs•Machined aluminum construction with black finish

•Matching floorboards available•Made in the U.S.A.

CONtOUr sHIFt LeVer AND spACer•Machined aluminum construction with a chrome or black finish

•Toe shifter includes an aluminum spacer to properly space shifter


PART # DESCRIPTION SUG. RETAIL1610-0198 For 08-10 FLHT/FLHR/FLHX/FLTR/FL Trike $149.951610-0197 For 97-07 FLT/FLHT/FLHR/FLTR 149.95

PART # DESCRIPTION SUG. RETAILFOr 84-10 FLHt/FLHr/FLHX/FL trIKe, 00-10 FLst1602-0403 Toe shifter, black $89.951602-0404 Heel/toe shifter, black 179.951602-0405 Heel/toe shifter, chrome 179.95

1861-0616

1861-0617

1621-0248

1621-0249

1610-0197

1602-0403 1602-0404

1602-0405

4

CArL brOUHArD DesIGNsThe custom Board Tracker pictured here with Carl Brouhard belongs to Pro Mod car racer Mike Maggio. This is Carl’s 4th collaborative effort with Mike and it recently appeared on the cover of American Cycle Magazine. While not meant to be a secret, the Brouhard name is one you can still introduce your customers to as some of newest and freshest designs rolling. Stuff they won’t see on the next hundred bikes they pass!

PART # DESCRIPTION SUG. RETAIL3501-0609 For 93-10 FLT, FLHT, FLHX, FLTR,

FLHR w/ hard bags (except Police models) $248.95

PART # DESCRIPTION SUG. RETAIL1107-0186 For 99-10 Big Twin (5-hole) $144.95

PART # DESCRIPTION SUG. RETAILFOr 08-10 FLHt, FLHX, FLtr, FL trIKe0703-0282 Lefty series, chrome $122.950703-0318 Waterfall series, black w/ re-machined accents 134.95FOr 92-07 FLt, FLHt0703-0283 Lefty series, black 122.950703-0319 Waterfall series, black w/ re-machined accents 134.95

PART # DESCRIPTION SUG. RETAILFOr 86-10 FLt, FLHt, FL trIKe, 87-10 FLst mODeLs1610-0193 Chrome $99.951610-0194 Black 99.95

PART # DESCRIPTION SUG. RETAIL1731-0210 For 08-10 FLHT, FLHX, FLHR, FLTR (except FL Trike) $85.951731-0211 For 99-10 Big Twin (except 08-10 Dresser) 85.95

PART # DESCRIPTION SUG. RETAIL1014-0075 For 99-10 Twin Cam w/ stock air cleaner

cover (except 08-10 Dyna) $105.95

sADDLebAG LAtCH COVers•Constructed of 6061 T-6 aluminum

•Available in a black-anodized Waterfall design with re-machined accents•Easy installation•Sold in pairs•Made in the U.S.A.

DerbY COVer•High-quality covers that scream “custom”•Constructed of 6061 T-6 aluminum•Available in Waterfall style with a black-anodized finish with re-machined accents


NOTE: 06 Dyna Glide and all 07-10 applications will require the use of gasket PART #s 0934-0289 or 0934-0788 (see 2010 FatBook).

FUeL DOOrs•High-quality fuel doors offer a head-turning custom look

•Constructed of 6061 T-6 aluminum

•Available in two distinct styles with either chrome or re-machined black-anodized finish

•Easy installation•Made in the U.S.A.

brAKe peDAL COVers•Replaces the stock rubber pad for an instant custom upgrade•Constructed of 6061 T-6 billet aluminum with a chrome or black-anodized finish; black-anodized finish features re-machined accents

•A perfect complement to the CBD Elite floorboards•Made in the U.S.A.

reAr mAster CYLINDer COVers•Superior quality and style over stock•Constructed of 6061 T-6 aluminum•Easy installation•Available in a black-anodized Waterfall design with re-machined accents•Made in the U.S.A.

AIr CLeANer INsert•High-quality insert for a sleek, custom look•Constructed of 6061 T-6 aluminum•Waterfall design; available in a black-anodized finish with re-machined accents

•Easy installation•Made in the U.S.A.

pOINts COVer•Constructed of 6061 T-6 aluminum•Easy installation•Available in Waterfall style with a black-anodized finish with re-machined accents


PART # DESCRIPTION SUG. RETAIL0940-0956 For 99-10 Twin Cam $79.95

0703-0318

1731-02101731-0211

1610-01931610-0194

0703-0282

5

GAsKet, seAL AND O-rING DIspLAY FOr bIG tWIN 6-speeD trANsmIssIONs/prImArIes•Complete four-color display features gaskets, seals and O-rings necessary to rebuild most OEM 6-speed Big Twin transmissions and primaries

•Displays are 20 mil flexible vinyl and come with all necessary hooks and clamshells•Mounts easily on any 1/8” or 1/4” pegboard•Designed so three 48” W x 32” H displays fit on a single sheet of 4’ x 8’ pegboard•Gaskets, seals and O-rings are not included; a list is furnished to allow you to stock the products that you require•Made in the U.S.A.

NOTE: GASKETS NOT INCLUDED. TO STOCK YOUR BOARD FOR INITIAL SET-UP AT TIME OF ORDER, THE FOLLOWING JAMES GASKETS ARE REQUIRED. SEE WWW.DRAGNETWEB.COM OR YOUR DEALER PRICE LIST FOR PRICING.

PART # DESCRIPTION SUG. RETAIL0934-2017 Gasket, seal and O-ring display $84.95 JAMES/OEM PART # DRAG PART # QTY.11105 DS-174334 25-pk.11120 0935-0114 10-pk.11132A 0935-0115 10-pk.11179 DS-174369 25-pk.11191 DS-174374 25-pk.11201 0935-0117 10-pk.11289A DS-173206 10-pk.11290 DS-173207 10-pk.11573 0935-0120 10-pk.12052A 0935-0121 5-pk.12074 0935-0123 ea.12077 0935-0125 ea.17369-06 N/A -

JAMES/OEM PART # DRAG PART # QTY.25416-06X 0934-1607 5-pk.26072-99A 0934-1555 6-pk.26077-99A DS-173231 10-pk.34901-07 0934-1622 5-pk.34917-06 0934-1189 ea.34934-06 0934-1883 ea.35607-06 0935-0128 ea.35654-06 0934-1192 ea.36805-06 0934-1194 ea.37101-84B 0935-0372 5-pk.60547-06 0934-1196 5-pk.63869-06 0934-1197 5-pk.

FOr 06-10 bIG tWIN 6-speeD trANsmIssIONs/prImArIes

6

GAsKet, seAL AND O-rING DIspLAY FOr tWIN CAm 96 mOtOr/trANsmIssION/prImArY•Vinyl display comes with necessary hooks to display all the gaskets, seals and O-rings necessary to rebuild an OEM 96” Twin Cam motor and an OEM 6-speed transmission/primary

•Must supply pegboard•Measures 48” x 32”•Gaskets, seals and O-rings are not included, a list is furnished to allow you to stock the product you require•Made in the U.S.A.

NOTE: GASKETS NOT INCLUDED. TO STOCK YOUR BOARD FOR INITIAL SET-UP AT TIME OF ORDER, THE FOLLOWING COMETIC GASKETS ARE REQUIRED. SEE WWW.DRAGNETWEB.COM OR YOUR DEALER PRICE LIST FOR PRICING.

PART # DESCRIPTION SUG. RETAIL9903-0313 Gasket, seal and O-ring display $71.95 OEM # DRAG PART # QTY.11105 0935-0186 10-pk.11105, 63783-00 0935-0186 10-pk.11120 0934-0740 5-pk.11132 0935-0170 25-pk.11140 0935-0174 25-pk.11145A 0935-0150 25-pk.11179 0935-0192 25-pk.11191 0934-1374 25-pk.11201 0935-0231 10-pk.11256 DS-172027 10-pk.11270 0935-0147 10-pk.11273 0935-0186 10-pk.11289A/11140 0935-0153 25-pk.11290 0934-1389 10-pk.11291 0935-0166 10-pk.11292 0935-0373 10-pk.11293 0935-0148 10-pk.11301 0935-0159 10-pk.

OEM # DRAG PART # QTY.12052A, 17369-06 0935-0162 5-pk.12068 0935-0374 10-pk.12074 0935-0375 1-pk.12077 0934-1392 10-pk.16719-99A 0934-0750 10-pk.16775-95B DS-172107 2-pk.17386-99 DS-172031 10-pk.17591-99 0934-1332 10-pk.17592-99 0934-1334 10-pk.18046-98 0935-0138 10-pk.18094-02A 0935-0137 25-pk.18635-99B 0934-1335 10-pk.25244-99A 2011-1500 5-pk.25416-99C 0934-0788 5-pk.26072-99A 0934-1338 10-pk.26077-99A 0934-1339 10-pk.26432-76A 0935-0152 10-pk.26858-99 0935-0146 10-pk.

OEM # DRAG PART # QTY.26995-86B 0935-0156 10-pk.27444-00Y 0935-0155 5-pk.29062-95 0934-1342 10-pk.29313-95 0934-2018 10-pk.29583-01A 0934-2061 10-pk.34901-07 0934-1340 5-pk.34917-06 0934-1234 10-pk.34934-06 0935-0241 5-pk.35607-06 0934-2019 5-pk.35654-06 0934-1232 10-pk.36805-06 0934-1233 10-pk.37101-84B 0935-0376 5-pk.45359-00 0935-0377 10-pk.60547-06 0934-1341 5-pk.63815-99 0934-1333 10-pk.63869-06 0934-2020 10-pk.65324-83A 0934-1337 10-pk.

7

bAKer DrIVetrAINBert Baker along with his wife, Lisa, attend shows, rides, rallies and races where they can display and talk about their American Made drivetrain products. The Bakers’ pride in Made-In-America quality is reflected in every product they design and manufacture. Products that greatly improve upon stock and feature superior quality when compared to other aftermarket parts are what sets this company apart.

PART # DESCRIPTION SUG. RETAILFOr 70-e84 sHOVeLHeAD W/ KICKer1101-0048 Wrinkle-black case 2.94 1st $3,537.951101-0049 Wrinkle-black case 3.24 1st 3,537.951101-0050 Polished case 2.94 1st 3,723.95FOr 70-e84 sHOVeLHeAD W/O KICKer1101-0051 Wrinkle-black case 2.94 1st 3,351.951101-0052 Wrinkle-black case 3.24 1st 3,351.951101-0053 Polished case 2.94 1st 3,537.95

PART # DESCRIPTION SUG. RETAIL1621-0245 For 93-09 FLT/FLHT/FLHR/FLTR models $89.95

pAsseNGer FLOOrbOArD COmFOrt KIt•Provides two additional floorboard positions

•Approximately 11/4” to 2” higher than the highest stock setting

•The tilted position places the floorboards at an ergonomic plane relieving stress in the legs and calves

•This tilted position also allows the passenger to push into the boards when cornering which provides a more secure feeling

•Provides two additional spacing widths to add additional comfort by placing the floorboards wider apart

•The wider position allows passengers to relax their lower body which takes pressure off of the inner thighs, knees and lower back


LOCK-ON NUt DrIVers•Locks onto hex screws•Ideal for hose clamps•Perfect for hard to reach areas•The standard kit includes 1/4” and 5/16” x 10” drivers

•The metric kit includes 6mm and 7mm x 10” drivers

PART # DESCRIPTION SUG. RETAIL3850-0116 Standard $42.953850-0117 Metric 42.95

6-speeD trANsmIssION AssembLIes FOr sHOVeLHeAD•Available with or without a kicker and comes with the stock external clutch throw-out arm

•Mainshaft (70-E84) permits re-use of stock primary drive•Significantly smoother shifting than stock due to a roller detent shift drum with reduced inertia and gear dog teeth with lead-in ramping

•Includes 23T sprocket•Available with 2.94 or 3.24 1st and .86 6th gear•Made in the U.S.A.

NOTE: 1” wider than stock transmission, may require exhaust spacing.

NOTE: Not for rear belt drive transmissions.

1101-0048

1101-0053

eAsY stArt CHAIN-DrIVe CAms•Start any engine regardless of displacement or compression ratio with a stock starter•Save your starter and battery; tested for 10,000 starts without running battery down•Spring-loaded lobe in cam allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance

8

625 eZ CAms•For 95/103/110 cubic-inch engines•Compression ratios from 10:1 to 10.75:1•High lift springs required

570 eZ CAms•For 88/95/103 cubic-inch engines•Compression ratios below 10:1•High lift springs required

585 eZ CAms•Optimized for Softail and Dyna 95” to 106” with slip-on mufflers, high-flow air filter and 9.0 to 10.5:1 compression

•Great results from 3000-6000 rpm•High lift springs required

551 eZ CAms•Optimized for 88/95” to 106” Touring bikes with slip-on mufflers and 9.0 to 10.0:1 compression•Best bolt-in cam available for Dressers •Pulls hard from idle to 4000 rpm•Can be used with stock pushrods, springs and lifters

583 eZ CAms•Optimized for use as a great overall cam for Softail and Dyna, but can be used in any Big Twin

•Provides strong low-end torque and horsepower that you can really feel

•Strongest from 1500-5000 rpm in a Softail and Dyna application

•High lift springs required

PART # DESCRIPTION SUG. RETAIL0925-0521 551 cams $355.95





FOr 99-06 tWIN CAm (eXCept 06 DYNA)

CHAIN DrIVeN CAms•For use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used

•551 cams are bolt-in applications; all others require high-lift valve springs•Made in the U.S.A.

NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.

625 CAms•For 95” or larger engines with compression ratios between 10.0 and 10.75:1

570 CAms•Designed for 88” to 95” engines with compression ratios between 9:1 and 10:1

585 CAms•Designed for 88” to 95” engines with compression ratios from 10 to 10.5:1 and 100” and 107” engines with ratios 9.7:1 to 10.5:1

551 CAms•Designed as bolt-in cam for stock 99-06 touring bikes•More power across the rpm range, with improved low and midrange torque•Can be used with stock pushrods, springs and lifters

583 CAms•Great overall cams for Softail and Dyna•Provides strong low-end torque and horsepower

•Strongest from 1500-5000 rpm

PART # DESCRIPTION SUG. RETAIL0925-0526 551C cams $305.95



FOr 99-06 tWIN CAm (eXCept 06 DYNA)


PART # DESCRIPTION SUG. RETAIL0925-0528 583C cams $305.95 VALVE GRIND OPEN CLOSE DURATION @ .053 VALVE LIFTstOCK CArbUretOrs/INJeCteDIntake -02°/02° 38°/34° 216°/216° .473”/.473”Exhaust 36°/36° 04°/04° 220°/220° .473”/.473”s&s 551CIntake 18° 20° 215° .550”Exhaust 39° 15° 237° .550”s&s 570CIntake 20° 40° 240° .570”Exhaust 55° 20° 255° .570”

VALVE GRIND OPEN CLOSE DURATION @ .053 VALVE LIFTs&s 583CIntake 8° 15° 204° .583”Exhaust 60° 22° 262° .583”s&s 585CIntake 20° 45° 245° .585”Exhaust 60° 20° 260° .585”s&s 625CIntake 20° 55° 255° .625”Exhaust 60° 20° 260° .625”

GRIND OPEN CLOSE DURATION @ .053 VALVE LIFTs&s 551Intake 15° 20° 215° .550”Exhaust 39° 18° 237° .550”s&s 570Intake 20° 40° 240° .570”Exhaust 55° 20° 250° .570”s&s 583Intake 8° 15° 204° .583”

GRIND OPEN CLOSE DURATION @ .053 VALVE LIFTs&s 583 (CONt)Exhaust 60° 22° 262° .583”s&s 585Intake 20° 45° 245° .585”Exhaust 60° 20° 260° .585”s&s 625Intake 20° 55° 255° .625”Exhaust 60° 20° 260° .625”

PART # DESCRIPTION SUG. RETAILFOr 08-10 FLHt/FLHr/FLtr/FLHX (W/O Abs)0610-0284 For use w/ OEM handlebars $259.950610-0285 For use w/ Beach bars, extra wide or

extra-wide w/ pullback handlebars 259.950610-0286 For use w/ Mini Ape Hangers 259.950610-0287 For use w/ 12” - 14” Ape Hangers 259.950610-0288 For use w/ 15” - 17” Ape Hangers 259.950610-0289 For use w/ 18” - 20” Ape Hangers 259.95

tHrOttLe-bY-WIre (tbW) KIts stANDArD KItsPART # DESCRIPTION SUG. RETAILFOr 96-07 FLHtC/CU, 06-07 FLHX0610-0290 For use w/ OEM handlebars $409.950610-0291 For use w/ Beach bars, extra wide or

extra-wide w/ pullback handlebars 409.950610-0292 For use w/ Mini Ape Hangers 409.950610-0293 For use w/ 12” - 14” Ape Hangers 409.950610-0294 For use w/ 15” - 17” Ape Hangers 409.950610-0295 For use w/ 18” - 20” Ape Hangers 409.95FOr 96-07 FLHr0610-0296 For use w/ OEM handlebars 409.950610-0297 For use w/ Beach bars, extra wide or

extra-wide w/ pullback handlebars 409.950610-0298 For use w/ Mini Ape Hangers 409.950610-0299 For use w/ 12” - 14” Ape Hangers 409.950610-0300 For use w/ 15” - 17” Ape Hangers 409.950610-0301 For use w/ 18” - 20” Ape Hangers 409.95

9

HANDLebAr CAbLe AND brAKe LINe KIts•Takes “cable calculation” headaches out of swapping handlebars

•Kits give you the correct length stainless braided cables and brake lines you need so you can complete a handlebar swap, install the new cables/brake lines and ride

•Throttle-by-wire (TBW) kits include clutch cable, brake lines, chrome “T” brake line junction, fittings, banjo bolts and copper crush washers

•Standard (cable throttle) kits include throttle cable, idle cable, clutch cable, brake lines, chrome “T” brake line junction, banjo bolts, fittings and copper crush washers


DeUtsCH pLUG AND reCeptACLe KIt•Used to replace the male and female connectors that are found on the regulator

•Designed to save time and labor•Kit includes 1-piston plug, receptacle and one male and one female crimp terminal

PART # DESCRIPTION SUG. RETAIL2120-0313 For all 94-03 XL models $24.95

PART # DESCRIPTION SUG. RETAILpLUG KIts2120-0310 Includes 3-position plug, three stamped crimp terminals and wedge lock $4.952120-0312 Includes 12-position plug, 12 stamped crimp terminals and wedge lock 22.95reCeptACLe KIt2120-0311 Includes 3-position receptacle, three stamped crimp terminals and wedge lock 6.95HOLe pLUGs2120-0309 For all Deutsch DTM series plugs and receptacles (10-pk.) 5.95

DeUtsCH pLUG AND reCeptACLe KIts•PART #2120-0310 is used on the harness side of fuel-injected models at the fuel pump•PART #2120-0311 is used on the fuel pump side of fuel-injected models at the fuel pump•PART #2120-0312 is used on the harness side of Big Twin models at the speedometer•Hole plugs are used when a wire/terminal is not present in order to keep connector watertight

PART # DESCRIPTION SUG. RETAIL2120-0350 Cap connector (5-pk.) $9.95 (ea.)2120-0351 Plug connector (5-pk.) 9.95 (ea.)

mAte-N-LOCK CAp AND pLUG CONNeCtOrs•Namz introduces the new AMP Mate-n-Lock 15-position male and female connectors with wire and interface seals

•Mate-N-Lock connectors feature a water-tight male/female design

•Used on all Thunderheart control modules and factory built motorcycles from Big Dog, American Ironhorse, Indian and more

•Come packaged with the necessary wire and interface seal


0610-0284

0610-0296

2120-0310

2120-03122120-0311

2120-0350

2120-0351

2120-0309

10

PART # DESCRIPTION SUG. RETAILFOr 08-10 FLHt, FLtr, FLHX, FLHr0801-0564 Vintage touring seat, (19” W front, 14” W rear) $699.950801-0565 Regal touring seat, (19” W front, 14” W rear) 709.950801-0571 Regal chrome studded touring seat, (19”W front, 14” W rear) 729.950801-0572 Regal black studded touring seat, (19”W front, 14” W rear) 729.950801-0566 Smooth chrome studded touring seat, (19” W front, 14” W rear) 719.950801-0567 Smooth black studded touring seat, (19” W front, 14” W rear) 719.95

sUper tOUrING seAt WItH DrIVer bACKrest•Super comfortable touring design provides rider and passenger with the fullest, most comfortable seat possible

•Seat moves driver back 1.75” further than stock•Seat is also lower (approximately .5”) than stock so rider can plant his feet on ground

•Expanded vinyl cover•Made in the U.S.A.

NOTE: Will fit with a handrail.

0801-0564

0801-0565

0801-0566

0801-0567

11

PART # DESCRIPTION SUG. RETAILFOr 08-10 FLHt, FLHr, FLtr, FLHX0801-0555 Vintage solo seat, (17” W) $519.950805-0036 Vintage rear seat, (13.5” W) 198.950801-0556 Chrome studded solo seat, (17” W) 539.95

PART # DESCRIPTION SUG. RETAILFOr 08-10 FLHt, FLHr, FLtr, FLHX (CONt)0801-0573 Chrome studded rear seat, (13.5” W) $208.950801-0557 Black studded solo seat, (17” W) 539.95DS-905562 Black studded rear seat, (13.5”) 208.95

sUper sOLO seAts WItH remOVAbLe bACKrest•Super comfortable 17” wide solo sits the driver 1.25” further back than stock seat•Seat is also lower (approximately .5”) than stock so the rider can plant his feet on ground•Fully adjustable, easily removable driver backrest provides unsurpassed comfort•Backrest has four height adjustments from 13.5” to 15.5” above seat bucket, and measures 7” high by 12” wide•Expanded vinyl cover•Optional wide rear seats offer maximum cushion•Made in the U.S.A.

NOTE: Will not fit with handrail

PART # DESCRIPTION SUG. RETAILFOr 08-10 FLHt, FLHr, FLtr, FLHX0801-0547 Vintage solo seat, (17”W) $319.950805-0036 Vintage rear seat, (13.5”W) 198.950801-0548 Chrome studded solo seat, (17”W) 339.95

PART # DESCRIPTION SUG. RETAILFOr 08-10 FLHt, FLHr, FLtr, FLHX (CONt)0801-0573 Chrome studded rear seat, (13.5”W) $208.950801-0549 Black studded solo seat, (17”W) 339.95DS-905562 Black studded rear seat, (13.5”W) 208.95

sUper WIDe sOLO seAt•Super comfortable 17” wide solo seat•Sits driver 1.25” further back than stock seat•Seat is also lower (approximately .5”) than stock so rider can plant his feet on ground

•Expanded vinyl cover•Optional wide rear seats offer maximum cushion•Made in the U.S.A.

NOTE: Will not fit with handrail.

0801-0555

0805-0036

0801-0547

0801-0548

0801-0556

0801-0573

0801-0557Ds-905562

0801-0549Ds-905562

0805-0036

12september 2010 | 9901-0813

PART # DESCRIPTION SUG. RETAILFOr 08-10 FLHt, FLtr, FLHX, FLHr0801-0554 Wide Tripper™ seat,

(14” W front, 11” W rear) $379.95

PART # DESCRIPTION SUG. RETAILFOr 97-07 FLHr, 06-07 FLHX (eXCept FLHrs)0801-0550 Wide Tripper™ seat,

(14” W front, 11” W rear) $379.95

PART # DESCRIPTION SUG. RETAILFOr 97-07 FLHt, FLtr0801-0551 Wide Tripper™ seat,

(14” W front, 11” W rear) $379.95

PART # DESCRIPTION SUG. RETAILFOr 08-10 FLHt, FLHr, FLtr, FLHX0801-0568 Wide Tripper™ seat,

(14” W) $579.95

PART # DESCRIPTION SUG. RETAILFOr 97-07 FLHr, 06-07 FLHX (eXCept FLHrs)0801-0559 Wide Tripper™ seat,

(14” W) $579.95

PART # DESCRIPTION SUG. RETAILFOr 97-07 FLHt, FLtr0801-0558 Wide Tripper™ seat,

(14” W) $579.95

WIDe trIpper™ seAts•Low and lean seat offers a full 14” width for the driver and an 11” wide passenger seat•Features a sleek design accented with detailed stitch work•Expanded vinyl cover•Made in the U.S.A.

WIDe trIpper™ seAt WItH DrIVer bACKrest•Style meets comfort in a seat that offers a full 14” width for driver and an 11” wide passenger seat•Features a sleek design accented with detailed stitch work•Expanded vinyl cover•Made in the U.S.A.

trIpper™ FAstbACK seAts•Offers a super clean, custom style•Cut low for the rider with good back support•Tapered in back but still offers good passenger comfort•Expanded vinyl cover•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOr 97-07 FLHr , 06-07 FLHX (eXCept FLHrs)0801-0552 Tripper™ Fastback seat, (12” W front, 7” W rear) $339.95FOr 97-07 FLHt, FLtr0801-0553 Tripper™ Fastback seat, (12” W front, 7” W rear) 339.95

0801-0550

0801-0568

0801-0554

0801-0559

0801-0552

september10

Documents

Transcript of september10