September 26th and 27th, 2018 EUROGRESS...
Transcript of September 26th and 27th, 2018 EUROGRESS...
Page 1
organized by: hosted by:
September 26th and 27th, 2018 EUROGRESS Aachen, Germany
Page 2
Page 3
Wednesday September 26th, 2018
Exhibitor list - page 20 - 21
Time EUROPA SAAL BRÜSSEL SAAL
11:20 - 13:00
15:40 Closing Address
Quirmbach, P.
09:20 - 11:00
Iron & Steel III
Corrosion
13:00
Refractory Protection
Testing
14:00 - 15:40
Raw material
Castable design
11:00 Break
Lunch
Time EUROPA
SAAL BRÜSSEL
SAAL
Gustav-Eirich-Award
12:00 - 13:00
10:00 -12:00
Opening Session
ROOM K 3 1st floor
14:00 - 15:40
Iron & Steel I Monolothics I Company
presentations
16:00 - 18:00
Iron & Steel II Monolothics II
13:00 Lunch
15:40 Break
Thursday September 27th, 2018
Company Presentations Room K 3 - page 12 - 13
Program EUROPA SAAL + BRÜSSEL SAAL
Poster exhibition is in front of the Brüssel Saal Poster Award, Wednesday 16:00 - 17:00
Page 24 - 25
Page 4
IMPORTANT ADDRESSES
Scientific Program ECREF European Centre for Refractories gGmbH Rheinstr. 58 56203 Höhr-Grenzhausen, Germany Tel.: ++49 2624 9433-140 Fax: ++49 2624 9433-135 E-mail: [email protected]
Congress Bureau ECREF European Centre for Refractories gGmbH Susanne Hartoch Rheinstr. 58 56203 Höhr-Grenzhausen, Germany Tel.: ++49 2624 9433-131 Fax: ++49 2624 9433-135 E-mail: [email protected] www.ic-refractories.eu
Congress Venue EUROGRESS Aachen Monheimsallee 48 52062 Aachen, Germany Tel.: ++49 241 9131-0 Fax: ++49 241 9131-200 [email protected] www.eurogress-aachen.de
Exhibition Top Messebau GmbH Annette Jahn Max-Planck-Str. 16 52249 Eschweiler, Germany Tel.: ++49 2403 7839-12 Fax: ++49 2403 7839-19 E-mail: [email protected]
[email protected] www.ic-refractories.eu
Page 5
PROGRAM subject to modifications
Wednesday 26th, 2018 EUROPA SAAL
10:00
10:05 - 10:35
10:35 - 11:15
11:15 - 11:55
Opening Session Thomas Seger RHI Magnesita President Verband der Deutschen Feuerfest-Industrie e. V. Höhr-Grenzhausen, Germany
Prof. Dr. rer. nat. Dr. h. c. Peter Quirmbach ECREF European Centre for Refractories gGmbH Höhr-Grenzhausen, Germany
Main Lectures
Stefan Rieder, Almatis GmbH, Frankfurt, Germany
Value creation through value chain co-operation
Mike O´Driscoll IMFORMED Industrial Mineral Forums & Research Ltd., Epson, Surrey, UK
The new world of China´s refractory mineral supply Christopher Parr Imerys Aluminates, Paris, France
Regional influences and challenges for sustainable refractory raw material selection
Opening Session
Page 6
Program Colloquium
Page 7
Gustav-Eirich-Award
Prof. Dr. rer. nat. Dr. h. c. Peter Quirmbach ECREF European Centre for Refractories gGmbH Höhr-Grenzhausen, Germany Introduction of the candidates
13:00 - 14:00 Lunch time
12:00
Dipl.-Ing. Stephan Eirich Maschinenfabrik Gustav Eirich GmbH & Co. KG, Hardheim, Germany
Gustav-Eirich-Award
Wednesday 26th, 2018 EUROPA SAAL
12:05 - 13:00
Prof. Dr. rer. nat. Dr. h. c. Peter Quirmbach ECREF European Centre for Refractories gGmbH Höhr-Grenzhausen, Germany Award ceremony
Presentation of the Gustav-Eirich-Award winners
Gustav-Eirich-Award
Page 8
Iron & Steel I Chairmen
Jansen, H. / Tonnesen, T.
Wednesday 26th, 2018 EUROPA SAAL
14:20 - 14:40
Evolution conditions of end bof slag on the effectively slag splashing technology
Smirnov, O.; Nemsadze, G., Sharandin, K.:
14:40 - 15:00
Lee, Tae hwa; Oh, Seung Jin:
Burned MgO-Cr2O3 bricks using an environmental-friendly natural binder
Program
15:00 - 15:20
Bilge, A.; Uylas, O., Sarioglu, N., Özdemir, N.:
Improving furnace efficiency and refractory perfor-mance with EAF slag optimization
14:00 - 14:20
Petrov, V.; Hirjak, R., Chudikova, D., Misanekova, V., Kotora, M., Cempa, S., Baba, M., Simko, R., Maslejova, A., Cernik, M.:
Optimization and design of new torpedo lining in U. S. Steel Kosice
15:40 – 16:00 Break
15:20 - 15:40
Jung, Jae-Il; You, Na Kim, Do, Mun Choi, Sang, Ahm Lee:
The introduction of a technology of forecasting the resi-dual status of the main runner at blast furnace
Page 9
Monolothics I Chairmen
Peng, H. / Wöhrmeyer, C.
Wednesday 26th, 2018 BRÜSSEL SAAL
Program
14:00 - 14:20
Holleyn, F.; Krause, O., Odziomek, M., Brochen, E., Dannert, C., Podwórny, J.:
Improved sintering due to an intelligent matrix design of high-alumina refactory monolithics that is adjusted to the service conditions
14:20 - 14:40
Angelkort, J.; Knoll, M., Reichert, A.:
Investigations on aluminium hydroxide and some intercalation compounds
14:40 - 15:00
Podwórny, J.; Dudek, K., Psiuk, B., Krause, O., Holleyn, F., Brochen, E., Simmat, R., Dannert, C.:
High temperature phase transformations in the matrix of high-alumina monolithics
15:00 - 15:20
Cölle, D.; Etienne, F., Vesenberg, B., Willenweber, A.:
Performance and critical evaluation of state-of-the-art NCC in the field of technology push and market pull
15:20 - 15:40
Tassot, P.; Kesselheim, B., Schemmel, T.:
Revolution in the dry gunning technology of no cement castable
15:40 – 16:00 Break
Page 10
Wednesday 26th, 2018 EUROPA SAAL
Iron & Steel II Chairmen
Buhr, A. / Schemmel, T.
Program
Wöhrmeyer, C.; Gao, S., Graddik, S., Parr, C., Simonin, F., Bhattacharya, G., Liyama, M., Gehre, P., Aneziris, C.:
16:00 - 16:20
Protection mechanism of CMA-additive in MgO-C ladle bricks
Uylas, O.; Bilge, A., Kurukavak, Ö., Özdemir, N.:
16:40 - 17:00
Effect of different magnesia raw materials on spinel formation and performance of AMC bricks
Buhr, A.; Pal, A. R., Singh, B., Dutton, J.:
16:20 - 16:40
Global and Indian perspectives of alumina-spinel lining concepts in steel ladle
Smirnov, O.; Nemsadze, G., Sharandin, K.:
17:00 - 17:20
A new solution for steel refining processes in CCM-tundish when purged with argon through a ring blowing unit
17:20 - 17:40
Nouri, M.; Jafarian, A., Eslampoor, M., Shirani, A., Karimi, A.:
An overview on improving ladle sand free opening performance at iran alloy steel co
17:40 - 18:00 Nourbakhsh, A.; Baghaei, A., Kahrizsangi, E., Aneziris, C.:
Role of nano-Al2O3 addition on the mechanical proper-ties improvement on carbon bonded alumina bodies
20:00 - 22:00 Reception at Krönungssaal Aachen
Page 11
Wednesday 26th, 2018 BRÜSSEL SAAL
Zement / Cement
Monolothics II Chairmen
Dannert, C. / Miranda, M.
Ulbrich, C.; Stein, T., Krause, O., Simmat, R., Dannert, C.:
16:20 - 16:40
Modification of the morphology of cement hydrate phases by using surface reactive substances
Program
Barlag, S.; Horn, S., Edinger, M., Setzer, C., Srinath, P.:
16:00 - 16:20
Phosphate deflocculants, the hidden champions - study on phosphate-alumina interactions in LCC
Stein, T.; Ulbrich, C., Krause, O.:
17:00 - 17:20
Radar technology based investigation on the formation of hydrate phases in refractory concrete
Peng, H.; Myhre, B.:
16:40 - 17:00
New insight into dry-out behaviour and explosion resistance of refractory castables
Kuiper, S.; Wams, G., Spies, A., Schmidtmeier, D., Klaus, S., Buhr, A., Dutton, J.:
17:20 - 17:40
Setting shrinkage measurement during cement hydration
17:40 - 18:00
Schmid, M.; Kaden, R., Walenta, G.:
Improved calcium aluminate cement for refractory castables
20:00 - 22:00 Reception at Krönungssaal Aachen
Page 12
Wednesday 26th, 2018 K 3 - first floor
Company Presentation
News and Innovation pitsch / Company Presentation
Chairman Quirmbach, P.
Saint-Gobain IndustrieKeramik Rödental GmbH Dr. Matthias Schumann Foundry Manager World Wide Concordiaplatz 3 51143 Köln Germany
GIR General Investment Resources Guram Nemsadze Chairman of the supervisory board, Owner of GIR 49-B Kosmicheskaya Str., 49040, Dnepr City, Ukraine
14:00 - 16:00
Mineracao Curimbaba LTDA Eng. Peter Miura Nakachima Technical Manager Pocos de Caldas, MG Brazil
Page 13
Company Presentation
Imerys Aluminates Phil Edwards Refractory Market Director 43, quai de Grenelle, 75015 Paris France
Hochschule Koblenz University of Applied Sciences Belinda Schwarz Rheinstraße 56 56203 Höhr-Grenzhausen Germany
Omya s.r.o. Ivan Polak Export Sales Manager Karadzicova 8/A 821 08 Bratislava, Slovakia
EKW GmbH Dipl.-Ing. Michael P. Wiessler Managing Director Bahnhofstraße 16 67304 Eisenberg Germany
Roskill Kerry Satterthwaite Division Manager - Industrial Minerals & Chemicals 54 Russell Road, London, SW19 1QL Great Britain
Page 14
Thursday 27th, 2018 EUROPA SAAL
Program
Iron & Steel III Chairmen
Viertauer, A. / Tassot, P.
09:20 - 09:40
Investment casting of titanium alloys with calcium zirconate moulds and crucibles
Bulling, F.; Klotz, U. E., Legner, C., Freitag, L., Faßauer, C., Schafföner, S., Aneziris, C.G.:
09:40 - 10:00
Performance of SkamolSteel Hybrid in furnaces
Jörgensen, B.:
10:00 - 10:20
An industrial study of the behaviour of insulation refractories in secondary steelmaking
Cotton, L.; Kubal, S., Madill, J., Pleydell-Pearce, C.:
10:20 - 10:40
Impact of iron on the crystallization of calcium silicate
Haastrup Merrild, S.:
10:40 - 11:00
Spider bricks manufactured by pressure slip casting
Gerlach, N.; Aneziris, C., Schöttler, L.:
11:00 – 11:20 Break
Page 15
Thursday 27th, 2018 BRÜSSEL SAAL
Program
Corrosion Chairmen
Klischat, H.-J. / Poirier, J.
09:20 - 09:40
Impact of phosphorus oxide (P2O5) on infiltration and corrosion of high alumina refractories: fundamental aspects and industrial applications (incineration and gasification)
Poirier, J.; Boigelot, R., Villalba Weinberg, A.:
10:40 - 11:00
Short-term cancellation
Kannabiran, S.; Zhang, M.:
09:40 - 10:00
Reaction of alumina based refractory matrix with CaO-SiO2-K2O-slags
Loison, L.; Tonnesen, T., Telle, R., Sassi, M., de Bilbao, E., Poirier, J.:
10:00 - 10:20
Alkali and slag resistance of calcium hexaluminate raw material
Sassi, M.; de Bilbao, E., Poirier, J., Loison, L., Tonnesen, T.:
10:20 - 10:40
Seawater MgO with improved alkali resistance by the addition of Ca(OH)2
Lim, Yun-tak; Kwak, Byeong-wook:
11:00 – 11:20 Break
Page 16
Thursday 27th, 2018 EUROPA SAAL
11:20 - 11:40
CeO2 and CePO4 containing high emissivity coatings for basic refractory bricks
Juthapakdeeprasert, J.; Lerdprom, W., Jayaseelan, D. D., Lee, W. E., de Susa Meneses, D.:
Refractory Protection Chairmen
Gehre, P. / Huger, M.
11:40 - 12:00
Measuring the effect of coatings on the heat transfer through refractory linings in the laboratory
Simmat, R.; Dannert, C., Bernard, B., Finke, V., Guaita, L.:
Program
Cement-free castables made of solid state sintered calcium zirconate for melting titanium and titanaium alloys
Jahn, C.; Aneziris, C., Schafföner, S., Vonderstein, C., Friedrich, B., Jansen, H.:
12:20 - 12:40
12:40 - 13:00
A novel environmental friendly insulating material for high temperature applications
Stein, V.; Schemmel, T., Stein, P.:
12:00 - 12:20
Stable crack propagation in free standing thermal sprayed Al2O3 and Al2O3-ZRO2–TIO2 coatings
Neumann, M.; Gehre, P., Aneziris, C., Kuebler, J., Dadivanyan, N., Jelitto, H., Schneider, G. A.:
13:00 - 14:00 Lunch time
Page 17
Thursday 27th, 2018 BRÜSSEL SAAL
Testing Chairmen
Szczerba, J. / Podworny, J.
11:20 - 11:40
Examination of the dynamic and static young´s modulus of high-alumina castables by non-destructive and destructive measurement techniques while considering the grain shape
Etzold, S.; Lirenman, R., Timmermann, M., Tonnesen, T., Telle, R.:
Program
11:40 - 12:00
Combining the uniaxial compression and diametrical compression tests to derive an improved failure criterion for refractories up to high temperatures
Brochen, E.; Dannert, C., Erbar, L., Krause, O., Abdelouhab, S.:
12:20 - 12:40
Short-therm cancellation
Zhu, L.; Liu, L.c., Wie, Y.:
12:40 - 13:00
Comparison of the microstructure and properties of conventionally pressed and novel nano-bonded precast alumina-mullite bodies
Jahanshahi, R.; Nourbakhsh, A., Baghaei, A., Lotfian, N.:
12:00 - 12:20
In-situ thermo-elastic measurements of high alumina castables during the corrosion process
Reichert, W.; Nießen, J., Kröll, E.,Tonnesen, T., Telle, R., Leto, P., Haubner, R.:
13:00 - 14:00 Lunch time
Page 18
Thursday 27th, 2018 EUROPA SAAL
Raw material Chairmen
Geldmacher, T. / Möhmel, S.
Program
14:00 - 14:20
Copetti, G.; Bregantic, M., Folco, L.:
Environmental protection - Development and application of „green“ environmentally friendly refractory - Materials for the high temperature technologies in iron and steel production
14:20 - 14:40
Pereira, A. L.; Reis, M. A., Nakachima, P. M., Ferreira, L. L. H. C.:
Brazilian refractory bauxite: a promising option for high-alumina refractories. Manufacturing, characterization and comparison
14:40 - 15:00
Ashlock, S.; Jain, D.:
Partial replacement of calcined alumina with Kyanite
15:00 - 15:20
Gómez Alvarez, G. I.; Martorello, L. F., Guzman, A. M.:
Short-term cancellation
15:40 Closing address: Quirmbach, P.
Page 19
Thursday 27th, 2018 BRÜSSEL SAAL
Castable design Chairmen
Blumenberg, M. / Cölle, D.
Program
14:00 - 14:20
Erbar, L.; Krause, O., Brochen, E., Dannert, C., Abdelouhab, S.:
Impact of cubic-shaped grain fractions on the working properties and green strength of high-alumina castables
14:20 - 14:40
Zhang, M.; Kannabiran, S.:
Ageing studies on andalusite based castables
14:40 - 15:00
Severoglu, M.; Sucu, M., Delibas, T.:
Different types of bauxite effect on calcium aluminate cement phase formation, characterization and investi-gation of refractory properties
15:00 - 15:20
Ye, G.; Tian, X., Ding, D., Zhang, P., Liao, G.:
Replacement of different sizes of corundum with andalusite in iron runner castables
15:20 - 15:40
Jafarian, A.; Nouri, M., Eslampoor, M., Shirani, A., Karimi, A., Rahmati, M. R.:
The successfull story of 30 % reduction in refractory consumtion at iran alloy steel co
Page 20
Almatis GmbH Lyoner Straße 9, 60528 Frankfurt am Main, Germany
Bernd Münstermann GmbH & Co.KG Lengericher Straße 22, 48291 Telgte, Germany
Calderys Deutschland GmbH In der Sohl 122, 56564 Neuwied, Germany
Calucem GmbH Besselstraße 8, 68219 Mannheim, Germany
Changhong Fireproof Material Limited Company Dashiqiao Yingda Rd. No. 28, Dashiqiao City, Liaoning Province, China
Chemische Fabrik Budenheim KG Rheinstraße 27, 55257 Budenheim, Germany
Cimsa Cimento - Sanayi ve Ticaret A.S. Kisikli Caddesi 4, Sarkuysan - AK is Merkezi S Blok Altunizade, 34662 Istanbul, Turkey
DIFK Deutsches Institut für Feuerfest und Keramik GmbH Rheinstraße 58, 56203 Höhr-Grenzhausen, Germany
Elkem GmbH Oststraße 16, 46483 Wesel, Germany
ESK-SIC GmbH Günter-Wiebke-Straße 1, 50226 Frechen, Germany
German Kiln Technology GmbH An der Buschdorfer Burg 73, 53117 Bonn, Germany
GIR-International, LLC 49-B Kosmicheskaya Str.., Dnepr, Ukraine
Hochschule Koblenz Rheinstraße 56, 56203 Höhr-Grenzhausen, Germany
IMCE nv Slingerweg 52, Poort Genk 5489 3600 Genk, Belgium
Imerys Aluminates 43, quai de Grenelle, 75015 Paris, France
Institut f. Gesteinshüttenkunde der RWTH Aachen Mauerstraße 5, 52064 Aachen, Germany
Intocast AG Pempelfurtstraße 1, 40885 Ratingen, Germany
Laeis GmbH Am Scheerleck 7, 6868 Wecker, Luxembourg
LIST OF EXHIBITORS Opening hours: September 26th 09:00 - 18:00
Exhibiton
Page 21
Maschinenfabrik Gustav EIRICH GmbH & Co. KG Walldürner Straße 50, 74736 Hardheim, Germany
Nabaltec AG Alustraße 50 - 52, 92421 Schwandorf, Germany
Purmetall GmbH & Co.KG Niebuhrstraße 57, 46049 Oberhausen, Germany
Qingdao Braide Graphite Co., Ltd.
No.33. Haier Road, Shandong Province, Qingdao City, China
RHI Magnesita
Wienerbergstraße 9, 1100 Wien, Austria
Roskill Information Services LTD
54 Russell Rd., London Great Britain
Rütgers Germany GmbH Kekuléstraße 30, 44579 Castrop-Rauxel, Germany
Saint-Gobain Industrie Keramik Rödental GmbH Oeslauer Straße 35, 96472 Rödental, Germany
Saint-Gobain Ceramic Materials GmbH Concordiaplatz 3, 51143 Köln, Germany
Steuler - KCH GmbH Berggarten 1, 56427 Siershahn, Germany
Thyme Hongkong Co Limited RM C&D, 3/F, HOw Ming Fty Bldg., 99 How Ming St, Kwun Tong Kln, Hong Kong
TU Bergakademie Freiberg Agricolastraße 17, 09599 Freiberg, Germany
Uelzener Maschinen GmbH Stahlstraße 26 - 28, 65428 Rüsselsheim, Germany
Velco GmbH Haberstraße 40, 42551 Velbert, Germany
vhi GmbH Klingelswiese 2, 56626 Andernach, Germany
Washington Mills Electro Minerals Ltd. Mosley Road, Trafford Park, Manchester M17 1 NR, UK
Wassmer Gruppe Steinmattenstraße 5, 79423 Heitersheim, Germany
Werner Mader GmbH Bullauer Straße 6, 64711 Erbach, Germany
Zueblin Chimney & Refractory GmbH Arsterdamm 72 a, 28277 Bremen, Germany
Exhibiton
Page 22
CONDITIONS FOR PARTICIPATION AND ADVICES FOR THE COLLOQUIUM ON REFRACTORIES 2018
Service: Participation fee and services are valid as mentioned below.
The registration is binding after receipt of the registration form by ECREF.
The invoice is at the same time the confirmation of the
registration.
For cancellation made before August, 10th, 2018 (date of receipt) there will be charged a 30 % service fee. No refund will be possible for cancellation after August 11th, 2018. If there are any other questions with respect to registration or changes of registration please contact the congress secretariat in Höhr-Grenzhausen directly. Tel: +49 2624 9433-131 / Fax: +49 2624 9433-135
You will receive your colloquium documents at the registration counter at EUROGRESS Aachen. The documents will not be mailed.
A non-participant can purchase vouchers at the registration coun-ter for the lunches in the Eurogress and the reception at the “Krönungssaal”, Aachen.
BANK ACCOUNT Please remit the invoice amount in Euro after the receipt of the invoice - all charges paid - to: ECREF gem. GmbH – Colloquium Commerzbank AG, Bonn
IBAN: DE 42 3804 0007 0127 7227 01 SWIFT: COBADEFFXXX
stating the name of participant, the number of registration and the in-voice number. All charges due to bank transfers have to be paid by the participant. It is requested that collective remittances should be accompanied by a name list. If you register late you are kindly requested to present a copy of the paying-in slip for the registration fee when calling for the colloquium documents. REGISTRATION FEES The registration is binding after receipt of the registration form by ECREF. until 10.08.2018 from 11.08.2018 Participants EURO 410,00 EURO 460,00 Speakers/Chairperson EURO 210,00 EURO 240,00 Students EURO 85,00 EURO 85,00
VDFFI Members EURO 380,00 EURO 430,00
Incl. value added tax (VAT) The registration fee includes: lectures, colloquium documents, visit of the exhibition, lunches on September 26th, 2018 and September 27th, 2018, reception on September 26th, 2018 at Krönungssaal, Aachen, 6 softdrinks/coffee.
Page 23
Optimization of SiC in Al2O3 - SiC-C based castables for blast furnace trough application. Optimierung von Al2O3 -SiC-C-Feuerbetonen für den Ein-satz im Hochofenbereich.
Charakterisierung von neuartigen thermoschockbeständigen Feuerfest-Mehrlagenlaminaten auf Basis des Materialsystems Calciumaluminat. Laminated multilayer for thermo-shock resistant refractories based on the material system calcium-aluminate.
REGISTRATION COUNTER It will be located in the entrance hall of the Eurogress Aachen. Opening times: Tuesday, September 25th, 17:00 - 19:00 Wednesday, September 26th, 08:00 - 18:30 Thursday, September 27th, 08:00 - 16:00 LANGUAGES The colloquium language is English.
ACCOMMODATION You can make your hotel reservation through the Aachen Tourist Office. We've set up a contingent there.
Verkehrsverein Bad Aachen e.V., P.B. 20 07, 52022 Aachen, Germany
Tel.:+49 241 18029-50/51 Fax:+49 241 18029-30
www.aachen-tourist.de - [email protected]
Please book your hotel accommodation at the earliest conven-ience. RECEPTION All participants are welcome to join the reception at the Krönungs-saal in the town hall in Aachen, on September 26th, 2018 between 20:00 - 22:00 h.
EXHIBITION The exhibition can be visited during the colloquium.
TRAFFIC CONNECTIONS The nearest international airports are Düsseldorf, Cologne/Bonn, Brussels and Amsterdam. The most direct connections between the a.m. airports are by train. Access to the EUROGRESS Aachen can be gained by buses number 3 A and 13 A. There is a parking garage for cars next to the Eurogress.
LIABILITY ECREF only acts as an agent and does not bear any liability for loss, accident, damage or injury to persons or property irrespective of the cause. Guests will take part in the colloquium and all events at their own risks. For travel insurance it is advisable to contact your local travel agency. Verbal agreements will not be binding unless they are confirmed in writing. The decisive date in all cases is that on which incoming mail is stamped by ECREF. Sole place of jurisdiction is Montabaur.
IMPORTANT INSTRUCTIONS FOR SPEAKERS 1) The time for presentation and discussion will be kept within the
limit of 20 min. 2) The lecture hall is equipped with a beamer. The screening of a
film is not accepted.
Page 24
Posters:
•
• Chen, Junfeng, Li Nan, Wie Yaowu, Han Bingqia Wuhan University of Science and Technology, China
Providing new insights into low-carbon refractories: enhanced the corrosion resistances by employing Ti3AlC2
• De Bilbao, Emmanuel, Brassamin S., Poirier J., Loison L., Tonnesen T., Cemhti France and RWTH Aaachen, Germany
The different permeabilities of refractories - standards vs accurate methods
• Oktay, Melis, Metamin A.S. Istanbul, Turkey Ozgen S., Istanbul Technical University The improvement of mechanical properties of alumina- based castables by the optimization of particle granulation
• Poirier, Jacques, Kadok J., Bost N., Coulon A., Ammar Mohamed-Ramzi, Brassamin S., Genevois C.,
Canizarès A., Cemhti, France Inhibiting the reverse Boudouard reaction catalyzed by FexOy in presence of H2 by adjunction of sulphurous species
• Dafei, Ding, Hanan Key Laboratory, China Morphology Evolution of the hydration products of hyd ratable aluminas at 400 CD
• Ye, Li, Hanan Key Laboratory, China Transformation of CAC hydrates at different position during drying of CAC bonded castables
• Wenjing, Gu, Hanan Key Laboratory, China Effect of alumina micro-powder on conversion of CAC hydrates at 500C
• Yang, Zhang,Hanan Key Laboratory, China Conversion of CaO Al2O3 10H2O at 600 C with and without water
• Reynaert, Camille, Sniezek E., Szczerba J. AGH University of Science and Technology, Poland Chemical corrosion reactions between steel slags and se condary components of refractories
• Ludwig, Maciej, Sniezek E., Szczerba J. AGH University of Science and Technology, Poland Corrosion resistance of refractory raw materials in contact With copper slag
• Schwarz, Belinda, Hochschule Koblenz, Germany New dual degree course in materials technology, glass and ceramics at university of applied sciences –
Sponsored by: Refractories worldforum, Göller Verlag GmbH and Steuler-KCH GmbH
Page 25
• Samadi, Soheil, Montanuniversität Leoben, Austria Thermomechanical modelling of industrial linings (mechanical characterization)
• Kieliba, Ilona, Tonnesen, T., Telle, R., Huger, M. Guéguen, E., RWTH Aachen, Germany
Thermal cycling characteristic of alumina-spinel steel ladle brick
• Vitiello, Diana, Smith, D., Nait-Ali, B., Tessier-Doyen, N. Université de Limoges, France Thermo-physical properties characterization of refractory materials
• Breder Teixeira, Lucas, Blond, E., Sayet, T., Gillibert, J. Université d´Orleans, France Inverse identification of mechanical material's parameters using the Integrated-DIC technique
• Nguyen, Thank Hung, Gruber, D., Harmuth, H. Montanuniversität Leoben, Austria Identification of the fracture mechanics of ordinary refractory materials on a microscale
• Asadi, Farid, Huger, M., Andre, D., Doumalin, P. Université de Limoges, France Micro-mechanical approach with the discrete element method
• Oliveira, Rafael, Rodrigues, J., Pereira, J. University of Coimbra and Univ. of Minho, Portugal Experimental thermomechanical characterization of refractory masonry
• Tadaion, Vahid, RWTH Aachen, Germany Thermo-mechanical behavior of permanent lining materials in steel ladle
• Gajjar, Pratik, University of Minho, Portugal Validation of thermomechanical models of refractory ma-sonry in industrial full-scale
• Kaczmarek, Robert, Pop, Ol, Dupre, J.C., Huger, M. Université de Limoges, France Thermomechanical characterization of alumina spinel refractory
• Reynaert, Camille, Sniezek, E., Szczerba, J. AGH University of Science and Technology, Poland Influence of minority species of slag on the corrosion of raw materials used to make refractory bricks for steel making application
• Barakat, Ahmed, Effect of PP-fiber addition on dry-out behaviour of microsilica gel-bonded castables
Page 26
Date: June 27, 2019 in German language Venue: ECREF gGmbH, Höhr-Grenzhausen, Germany
REACH – Einstufung, Kennzeichnung und Verpackung von Stoffen und Gemischen (CLP) - Arbeitsschutz
♦ REACH abgeschlossen? - Kommt noch was?
♦ Sicherheitsdatenblatt - Lesen, verstehen und interpretieren
♦ Einstufung und Kennzeichnung von Feuerfesten Produkten
♦ Anhang VIII CLP-Verordnung - Meldepflicht an Giftinformations-zentren
♦ Quarzfeinstaub
♦ Sicheres Arbeiten mit Hochtemperaturwollen (HTW)
♦ Einfaches Maßnahmenkonzept Gefahrstoffe (EMKG) - Systematische Beurteilung von Gefährdungen
Referenten: Dr. Elke Steinle (Verband der Deutschen Feuerfest-Industrie e. V.), Dipl.-Geogr. Norbert Kluger (Berufsgenossenschaft der Bauwirtschaft, Berlin), Dipl.-Ing. (BA) Mert Vuraldi (Mineralmahlwerk Westerwald Horn GmbH & Co. KG, Siegen) Dr. Frank Lützenkirchen (Quarzwerke GmbH, Frechen), Dipl.-Ing. Annette Wilmes (Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Dortmund), Dipl.-Ing. Heinz Wimmer (Consultant Elsdorf) Teilnehmergebühr: für Mitglieder des VDFFI e.V. € 390,-
Nichtmitglieder VDFFI e. V. € 440-
In der Gebühr enthalten sind Arbeitsunterlagen, Tagungsgetränke, Mit-
tagessen und Abendprogramm. Die Unterbringungskosten sind nicht in
der Teilnehmergebühr enthalten.
This seminar will be held
in German in 2019 and
in English in 2020
Infos for all seminars: ECREF European Centre for Refractories gGmbH Rheinstraße 58 56203 Höhr-Grenzhausen Tel.: 02624 9433-140 Mail: [email protected] Fax.: 02624 9433-135 www.ecref.eu
Page 27
Date: September 3 - 5, 2019 in English language
Venue: ECREF gGmbH, Höhr-Grenzhausen, Germany
REFRACTORIES -
Key Technology and its Applications
♦ Introduction to refractory science
♦ Material science II - basic materials
♦ Review of shaped acid products
♦ Material science - acid and neutral materials
♦ Review of shaped basic products
♦ Wear and corrosion of refractories
♦ Review of refractory light-weight and insulating materials
♦ Review of monolithic refractories
♦ Lining concepts and techniques of unshaped refractories
♦ Refractory applications for the glass industry
♦ Refractory applications for ironmaking
♦ Refractory applications for the foundry industry
♦ Refractory applications for the steel industry I
♦ Refractory applications for the steel industry II
♦ Refractory applications for the cement industry
♦ Refractory applications for thermal waste treatment and
incineration plants
Speakers: Prof. Dr. Christos Aneziris (TU Bergakademie Freiberg),
Dr. Fred Brunk (P-D refractories GmbH), Dipl.-Min. Daniel Cölle (EKW
GmbH), Dr. Christian Dannert (Forschungsgemeinschaft Feuerfest e. V.),
Dr. Vera Finke (Rath GmbH, Meißen), Dipl.-Ing. (FH) Johannes Imle
(RefraConsult GmbH), Dr. Hans-Jürgen Klischat (Refratechnik Cement
GmbH), Prof. Dr. Olaf Krause (Hochschule Koblenz), Dipl.-Ing. Jens Pisch-
ke (Salzgitter Flachstahl GmbH), Dr. Stefan Postrach (RHI Glas
GmbH), Prof. Dr. Dr. h. Peter Quirmbach (ECREF gGmbH), Dipl.-Ing.
Hans J. Sauer (Jünger+Gräter GmbH), Dr. Almuth Sax (Universität Kob-
lenz-Landau). Dipl.-Min. Werner Schönwelski (Steuler KCH GmbH),
Registration fee: member of VDFFI e. V. € 950,-
non-member VDFFI e.V. € 1050,-
The fee includes working papers, drinks and lunches. Expenses for the
accommodatin are not included in the registration fee.
This seminar will be held
in English in 2019 and
in German in 2020
Page 28
Date: November, 6.- 7, 2018 in German language Venue: ECREF gGmbH, Höhr-Grenzhausen, Germany
Prüfung und Bewertung von feuerfesten Rohstoffen und Erzeugnissen
♦ Einführung in die Prüftechnik feuerfester Roh- und Werkstoffe
♦ Beton & Prüfvorbereitung
♦ Physik, Chemie
♦ Mineralogie, analytisch, z. B. RBA
♦ Mineralogie optisch, z. B. Mikroskopie
♦ Wärmeleitfähigkeit, u. a. Heißdraht, Kalorimetrie
♦ Hochtemperatur-Eigenschaften, u. a. DE, DFL,
Strahlverschleiß
♦ Korrosion, Schmelz-, Schlacken– und Gaskorrosion
Praktische Vorführung der Prüfverfahren sowie Diskussion der Ergebnisse und ihre Bedeutung für die betriebliche Praxis.
Teilnahmegebühr:
Mitglieder VDFFI e. V. € 660,-
Nicht Mitglieder VDFFI e. V. € 720,-
In der Gebühr enthalten sind Arbeitsunterlagen, Tagungsgetränke,
Mittagessen und Abendprogramm. Die Unterbringungskosten sind
in der Teilnahmegebühr nicht enthalten.
This seminar will be held
in German only
Page 29
Page 30
Page 31
Springer Fachmedien Wiesbaden GmbH Abraham-Lincoln-Straße 46, 65189 Wiesbaden, Germany Institute of Refractories Engineers 575 Trentham Road, Blurton, Stoke-On-Trent, ST3 3BN, UK Industrial Minerals Nestor House, Playhouse Yard, London EC4V 5EX, UK IMFORMED - Industrial Mineral Forums & Research 2a The Quadrant, Upper High St., Epsom, Surrey, KT17 4RH, UK International Cement Review Old Kings Head Court, 15 High Street, Dorking, UK Refractories Windows Chuangxin Building, New & High-tech Development Zone, Tangshan City, Hebei Province, 063020, P. R. China refractories WORLDFORUM ceramic forum international, Göller Verlag GmbH, Aschmattstraße 8, 76532 Baden-Baden, Germany Verlag Stahleisen Sohnstraße 65, 40042 Düsseldorf, Germany Vulkan Verlag GmbH Friedrich-Ebert-Straße 55, 45127 Essen, Germany
MEDIA PARTNERS / DISPLAY TABLES
Page 32
Venue of the Colloquium
Organizer
Verband der Deutschen Feuerfest-Industrie e. V. Rheinstr. 58 56203 Höhr-Grenzhausen, Germany Tel.: ++49 2624 9433-100 Fax: ++49 2624 9433-155 E-mail: [email protected] www.vdffi.de
ECREF European Centre for Refractories gGmbH Rheinstr. 58 56203 Höhr-Grenzhausen, Germany Tel.: ++49 2624 9433-140 Fax: ++49 2624 9433-135 E-mail: [email protected] www.ic-refractories.eu
Page 33
High-Temperature Materials Microstructural Design and Reinforcement
Mechanical Testing Pilot Plant Scale Production Large Part Manufacturing LCC, ULCC, NCC, self-flowing, microporous High-Temperature Testing Gas Corrosion, Hot Corrosion, Melt Corrosion Slag Formation, Wetting HT-XRD, HT-TEM, Creep, Wear, Strength Containerless smelting viscosity and surface tension tests Thermochemistry Phase Diagram Assessment Process Simulation, Corrosion Prediction
INSTITUT FÜR GESTEINSHÜTTENKUNDE MAUERSTR. 5, D-52064 AACHEN
Creativity-Know-how-Independence-Reliability....by
Institut für Gesteinshüttenkunde, Lehrstuhl für Keramik und Feuerfeste
Werkstoffe
Institute of Mineral Engineering, Chair of Ceramics and Refractories
Mauerstrasse 5, D-52064 Aachen
Tel. + 49 241 809 49 68, Fax + 49 241 809 22 26 www.ghi.rwth-aachen.de [email protected]
Page 34
Page 35
Page 36