September 23, 2010 IOT POLY ENGINEERING I1-17 DRILL: LETTER YOUR RESPONSES ON A SEPARATE SHEET OF...
-
Upload
andra-james -
Category
Documents
-
view
212 -
download
0
Transcript of September 23, 2010 IOT POLY ENGINEERING I1-17 DRILL: LETTER YOUR RESPONSES ON A SEPARATE SHEET OF...
September 23, 2010
IOT
POLY ENGINEERING
I1-17
DRILL: LETTER YOUR RESPONSES ON A SEPARATE SHEET OF PAPER. RESPONSES WILL BE COLLECTED
Answer these questions in complete sentences.1) What are the consequences of coming late to class without a
pass.2) What are the consequences of talking in class when the
teacher is talking.3) Why should you not talk when the teacher is talking?4) What are the consequences of talking in class when another
student is speaking to the class.5) Why should you not talk when other students are speaking to
the class.6) What are the consequences of having more than two
detentions?
IOT
POLY ENGINEERING
I1-17
METROLOGY is the science of measurement, based on the Greek word ‘metron’.METROLOGY should not be confused with meteorology.
Yesterday, with a partner, you were to discuss and make a list of the following:1.Why do we measure?2.What do we measure?3.How do we measure?4.When do we measure?5.Where do we measure?6.Who measures?
IOT
POLY ENGINEERING
I1-17
INTRODUCTION TO METROLOGY
IOT
POLY ENGINEERING
I1-17
Measuring instruments
• Ruler• Thermometer• Barometer• Clock• Scale• Voltmeter• GPS• Hydrometer• Viscometer
• Graduated Cylinder• Radar Gun• Speedometer• Tachometer• Accelerometer• Spectrometer• Protractor• Compass• Sphygmomanometer
What do we measure?
• Length – Length• Area – Length2
• Volume – Length3
• Time – Time• Speed – Length/Time• Acceleration – Length/Time2
• Mass• Density - Mass/Volume
Fundamental Measurements
• International System of Units has 7 basic units Length – meters
Time – seconds
Mass – kilograms
Amount of Material – moles
Light Intensity – candela
Electrical Current – ampere
Temperature - K
IOT
POLY ENGINEERING
I1-17
We will now look at 3 of the 7 base units in the International System of Units (SI).
IOT
POLY ENGINEERING
I1-17
LENGTH
IOT
POLY ENGINEERING
I1-17
MASS
TIME
IOT
POLY ENGINEERING
I1-17
IOT
POLY ENGINEERING
I1-17
"METROLOGY is the science and art of measurement. Measurement is extracting information from nature or from devices people have engineered. It is also about the uncertainty in the extracted data, communicating it to other people in a standard way, and making them confident in our measurements by establishing traceable measurement systems.“ Copyright © 1998-2006 Newton Metrology Ltd.
You will now receive a 4-sided concise summary of the International System of Units (SI).
Read and study this summary now, as it may help you to find some answers to the homework.
September 23, 2010
IOT
POLY ENGINEERING
I1-17
HOMEWORK:
LETTER your answers. Use complete sentences.
Define the following 10 terms:
STANDARD, ACCURACY, PRECISION, CALIBRATION,
TRACEABILITY, DERIVED UNIT, BASE UNIT, ERROR,
PERCENTAGE OF ERROR, UNCERTAINTY
BRING YOUR RULER, PROTRACTOR, AND COMPASS TOMORROW.