Sensor Positioning SystemAward winning flexible system for sensor placement

Base Footn Holds standard 12 mm diameter rods

n Vertical or horizontal rod placement

n Fits on aluminum extrusions, base plates and profiles

Jointn Connects and holds 2 standard 12mm diameter rods

n Easy to connect and disconnect

n Mix and match joint and knuckle in available space

2

Efficient, Precise and Easy to AssembleSo you picked the best sensor for the application, but engineers know implementation is everything. You select the best technology in the world

for your equipment but if it is not designed, installed, and positioned properly, it will never work right. This can cause warranty issues and service

calls over a simple sensor installation. Operators or technicians disable or remove faulty sensors if they start impacting immediate production

requirements. These kinds of situations can then lead to bigger problems later — maybe the bracket doesn't hold the sensor in position, or the

bracket cannot be aligned to the target. There are tens of thousands of mounting options available and selecting the right one that will work long

term can be daunting. The Balluff mounting system (BMS) is efficient, precise, easy to assemble and is an award winning design, adding modern

style and high functionality in positioning sensors.

Rodn Standard 12mm diameter

n Anodized aluminum or stainless steel rods

n Rods can be cut to fit desired length

Knucklen Connects rod to sensor holder

n Can be adjusted easily to angle the

beam or reflector

Sensor Holdern Universal sizes to fit standard tubular sensors

n Different varieties of holders to fit reflectors or sensors

n All of the sensor holders fit with the knuckle

3n www.balluff.com

Sensor positioning can be a simple or complicated task with multiple factors to take into account.

1 What sensor? How does it mount? What is the sensing distance? Is there a dead zone? Stainless steel needed?2 What target? Where is the target? Where is the target coming from? Where can I sense on the target?3 What space? Where can I connect to the machine? What are the obstacles to overcome? Is there vibration?

4

Accessories Cross-connections and base foot

Description Base Foot Joint Knuckle Version For 1 mounting rod Ø 12 mm

(vertical or horizontal)For 2 mounting rods Ø 12 mm

For 1 mounting rod Ø 12 mm

Use For mounting on base plates or profiles

Adjustable connecting piece for Ø 12 mm mounting rods

For holding all sensor and reflector mounts

Ordering code BAM024P BAM024R BAM024TPart number BMS CU-M-D12-B028-00 BMS CCJ-M-D12-B-01 BMS CS-M-D12-BZMaterial/Surface protection GD-Zn/chrome-plated GD-Zn/chrome-plated GD-Zn/chrome-plated

5.2

13

36

28

32.5

64

M5

(2x)

30

Ø12

Ø12

12

15

6

Ø19.8

45.5

30Ø

12

18.9

24.2

M5

30

Ø12

Ø12

Ø32.3

36.3

46.7

16

5n www.balluff.com

AccessoriesRods

Description Mounting rod Ø 12 mm Mounting rod Ø 12 mmVersion Knurled, can be cut to required size Smooth, can be cut to required sizeLength 100 mm Ordering code BAM021Y

Part number BMS RS-M-D12-0100-00Length 150 mm Ordering code BAM002R BAM0045

Part number BMS RS-M-D12-0150-00 BMS RS-S-D12-0150-00Length 200 mm Ordering code BAM021T

Part number BMS RS-M-D12-0200-00Length 250 mm Ordering code BAM002T

Part number BMS RS-M-D12-0250-00Length 300 mm Ordering code BAM021W BAM0046

Part number BMS RS-M-D12-0300-00 BMS RS-S-D12-0300-00Length 750 mm Ordering code BAM021U

Part number BMS RS-M-D12-0750-00Length 1000 mm Ordering code BAM002U

Part number BMS RS-M-D12-1000-00Material Anodized aluminum Stainless steel

The mounting rods are knurled full-length.

This prevents any position change.

Stainless

Steel

1×45

°1×

45°

L

Ø12

1×45

°1×

45°

L

Ø12

6

Stainless

SteelStainless

Steel

Description M8 sensor holder M12 sensor holderVersion For clamping cylinders For clamping cylindersUse For sensors and

clamps M8For sensors and clamps M12

Ordering code BAM0036 BAM0037Part number BMS CS-M-D12-ID08-01 BMS CS-M-D12-ID12-01Material Stainless steel Stainless steelKit 1 containing: 150 mm rod, knuckle, foot, sensor holder

SET016T BAV BP-PH-00105-02

Kit 2 containing: 2x150 mm rod, knuckle, joint, foot, sensor holder

SET016W BAV BP-PH-00065-02

Ø20

Ø8.5

90°

3

Ø20

Ø12.5

90°

Stainless

SteelStainless

Steel

Description M12 adjustment unit M18 adjustment unitVersion For clamping cylinders For clamping cylindersUse For aligning laser sensors M12 For aligning laser sensors M18

Ordering code BAM003E BAM0038Part number BMS AD-M-002-D12/D12 BMS AD-M-002-D12/D18Material Stainless steel Stainless steel

Ø20

Ø12

.5

Ø20

Ø18

.5

AccessoriesTubular style mounting and positioning

7n www.balluff.com

Stainless

Steel

Description M18 sensor holder M30 sensor holderVersion For clamping cylinders For clamping cylindersUse For sensors and

clamps M18For M30 sensors and clamps

Ordering code BAM0032 BAM0033Part number BMS CS-M-D12-ID18-01 BMS CS-M-D12-ID30-01Material Stainless steel Stainless steelKit 1 containing: 150 mm rod, knuckle, foot, sensor holder

SET016U BAV BP-PH-00105-01

Kit 2 containing: 2x150 mm rod, knuckle, joint, foot, sensor holder

SET011M BAV BP-PH-00065-01

Ø18.5

90°

34

3

Stainless

Steel

33

2619

3

47

Ø42 Ø30.2

Ø20

R14

90°

AccessoriesTubular style mounting and positioning

Single Rod-Kit 1includes:1-foot

1-rod (150 mm)

1-knuckle

1-sensor holder

(does not include sensor)

Dual Rod-Kit 2 includes:1-foot

2-rods (150 mm)

1-knuckle

1-sensor holder

(does not include sensor)

8

Stainless

Steel

AccessoriesBlock style and reflector Mounting and positioning

1

A-A

6.6

120

15

60

36.8

R20

.3

50°

AA

5

Ø27

Ø20

Ø12

4

250

49.5

3.810

.5

15.325

.334.3

40.5

200.

5

2×M3

Ø6.5

2×M4

M516

55.5

51

1629.5

344.75

510

.5

57

16 16

3.5

0.7

5.5

3× Ø3.5

6× Ø4.2

4.75

61

20

3

59

34

Order code BAM003C BAM003A BAM0042 BAM0043 BAM01AW BAM01ULPart description BMS CS-M-D12-BX05-02 BMS BS-M-D12-0250-01 BMS CR-M-D12-IS-04 BMS CS-M-D12-B21K-04 BMS CS-M-D12-B23K-05 BMS CS-M-D12-IX14-01SensorsBCS Q40 n

BOS 21M n n

BOS 23K n n

BOS 25K n n

BOS 26K n n n

BOS 50K, 63M, 66M n

ReflectorsBOS R-1, R-14, R-26 n

BOS R-9 n n n

BOS R-22 n n

BOS R-34, R-36, R-44, R-46 n

9n www.balluff.com

Stainless

Steel

AccessoriesBlock style and reflector Mounting and positioning

Stainless

Steel

36°

Ø20

2550

73

88

50

8

40

4× Ø

4.3

R20

56

3

42

20

30

11

2× Ø

7 11

6.5

35

3

30

Ø20 7.

9

11

29

2× M

4

7.9

13

55Ø8

11

2714

40

20

Order code BAM003C BAM003A BAM0042 BAM0043 BAM01AW BAM01ULPart description BMS CS-M-D12-BX05-02 BMS BS-M-D12-0250-01 BMS CR-M-D12-IS-04 BMS CS-M-D12-B21K-04 BMS CS-M-D12-B23K-05 BMS CS-M-D12-IX14-01SensorsBCS Q40 n

BOS 21M n n

BOS 23K n n

BOS 25K n n

BOS 26K n n n

BOS 50K, 63M, 66M n

ReflectorsBOS R-1, R-14, R-26 n

BOS R-9 n n n

BOS R-22 n n

BOS R-34, R-36, R-44, R-46 n

Stainless

Steel

28

Ø20

20

3

34

32

10

16

2x M4 - 6H

4

10

Order code BAM0039 BAM0040 BAM0034 BAM003N BAM0035 BAM01AYPart description BMS BS-M-D12-0250-02 BMS CS-M-D12-BX06-03 BMS CR-M-D12-IU-02 BMS CR-M-D12-IU-05 BMS CR-M-D12-IS-03 BMS CS-M-D12-BX07-06SensorsBOS 2K, 5K, 6K n n

BOS Q08 n

BOS 50K n

ReflectorsBOS R-1 n n

BOS R-2, R-3 n

BOS R-6BOS R-11 n n

AccessoriesBlock style and reflector Mounting and positioning

Ø12

4

2.7

250

11.2

21.5

20

25 15

10

4.5

16.5

150

4×M3

3×Ø3.4

Ø5.

9

Stainless

Steel

19

2317

3

24

15

9.5

17

13

12

Ø20

28

65

4× M3×0.5

25.4 12.5

2× Ø4.2

25

79

72× Ø

5.2

9.5

17

Stainless

Steel

Ø5.3

Stainless

SteelStainless

Steel

11n www.balluff.com

Order code BAM0039 BAM0040 BAM0034 BAM003N BAM0035 BAM01AYPart description BMS BS-M-D12-0250-02 BMS CS-M-D12-BX06-03 BMS CR-M-D12-IU-02 BMS CR-M-D12-IU-05 BMS CR-M-D12-IS-03 BMS CS-M-D12-BX07-06SensorsBOS 2K, 5K, 6K n n

BOS Q08 n

BOS 50K n

ReflectorsBOS R-1 n n

BOS R-2, R-3 n

BOS R-6BOS R-11 n n

AccessoriesBlock style and reflector Mounting and positioning

Stainless

Steel

R13.

5

Ø3.

5

85

Ø20

21

85

77

93

77

274

4

3

85

77

7785

4

93

Ø3.5

4

54.7

3421

.2

22.4

M4

M4

18.2

Ø20

21

3

R13.5

27

M4

12

AccessoriesSensor and light mounts

Order code BAM01F3 BAM003F BAM003H BAM003R BAM003P BAM01F2Part description BMS CS-M-D12-BX10-08 BMS BS-M-D12-0250-03 BMS BS-M-D12-0400-04 BMS CS-M-D12-IQ40-03 BMS CS-M-D12-IQ40-02 BMS CS-M-D12-BX11-09Sensor BOS 5K n

BGL 30C, 50C n

BWL 40/40, 54/54 n

BWL 68/68, 90/90, 110/110 n

BGL 5A, 10A, 20A, 30A, 50A, 80A n

BGL 80A, 120A, 180A, 220A n

BES 40x40, Q40 n n

BES IKU n n

Linear lights: 85mm or 170mm n

Stainless

Steel

36

30

6052.529

4

25.4

10

37.5

10

16.5

20

3× M4

2× M

5

2× Ø3.2

28Ø20

20

3

90°

3

3

13n www.balluff.com

AccessoriesSensor and light mounts

Order code BAM01F3 BAM003F BAM003H BAM003R BAM003P BAM01F2Part description BMS CS-M-D12-BX10-08 BMS BS-M-D12-0250-03 BMS BS-M-D12-0400-04 BMS CS-M-D12-IQ40-03 BMS CS-M-D12-IQ40-02 BMS CS-M-D12-BX11-09Sensor BOS 5K n

BGL 30C, 50C n

BWL 40/40, 54/54 n

BWL 68/68, 90/90, 110/110 n

BGL 5A, 10A, 20A, 30A, 50A, 80A n

BGL 80A, 120A, 180A, 220A n

BES 40x40, Q40 n n

BES IKU n n

Linear lights: 85mm or 170mm n

Stainless

SteelStainless

Steel

35

86

4565 1.5

80 30

60 21

39.8

19.8

14.7

55 60

35

169.5

5

13

40 433126Ø

202× Ø5.6

2× Ø8

6× Ø

5.3

Stainless

Steel

6

15

21

4

4

9.5

67.

5

87.

5

107

.5

12

50

92

100

M4 (4x) M3 (5x)

Ø20

20

58.

25

116

.5 R

14

3

90°

14

AccessoriesRod Clamps and Air Blow Off

Ø16

10.5

10

12

Ø12Ø4.2

Ø32

Connection for compressed air hose Ø 4 mm

Description Rod Clamp Mount Rod Clamp Back Mount Air Blow Off Pivot Mount Pivot Mount Pivot Mount Positioning bracketUse BOS 6K BOS 6K BOS and BOD M12 M18 M30 BOS M18 laserOrder code BAM022C BAM022A BAM0041* BAM01KM BAM00T3 BAM00TN BAM00T2Part number BMS CS-M-D12-S6K-00 BAM MC-XO-030-6K-4 BMS CZ-M-D12-I-001 BOS 12,0-KB-1 BOS 18,0-KB-1 BOS 30,0-KB-1 BOS 18,0-HW-6Material Anodized aluminum Anodized aluminum Anodized aluminum PA-GF PA-GF PA-GF Steel

* Requires BAM003116

11.9

4.5

Ø3.2

16.5

R16

M432 22.912

~ 1

90

Ø 3

0 1

2

40.7

22

5

27

Ø 2

0 Ø 4

4

15n www.balluff.com

AccessoriesPositioning

Ø4.25

50

40

30

42

4030

M18

×1

50

10.8

36.54

106.

5

Description Rod Clamp Mount Rod Clamp Back Mount Air Blow Off Pivot Mount Pivot Mount Pivot Mount Positioning bracketUse BOS 6K BOS 6K BOS and BOD M12 M18 M30 BOS M18 laserOrder code BAM022C BAM022A BAM0041* BAM01KM BAM00T3 BAM00TN BAM00T2Part number BMS CS-M-D12-S6K-00 BAM MC-XO-030-6K-4 BMS CZ-M-D12-I-001 BOS 12,0-KB-1 BOS 18,0-KB-1 BOS 30,0-KB-1 BOS 18,0-HW-6Material Anodized aluminum Anodized aluminum Anodized aluminum PA-GF PA-GF PA-GF Steel

* Requires BAM0031

Object Detection

Linear Position Sensing and Measurement

Fluid Sensors

Industrial Identification

Industrial Networking and Connectivity

Accessories

Systems and Services

USA Balluff Inc. 8125 Holton Drive Florence, KY 41042 Phone: (859) 727-2200 Toll-free: 1-800-543-8390 Fax: (859) 727-4823 E-Mail: balluff@balluff.com

Canada Balluff Canada, Inc. 2840 Argentia Road, Unit #2 Mississauga, Ontario L5N 8G4 Phone: (905) 816-1494 Toll-free: 1-800-927-9654 Fax: (905) 816-1411 E-Mail: balluff.canada@balluff.ca

www.balluff.com

Mexico Balluff de México SA de CV Anillo Vial II Fray Junípero Serra No. 4416Colonia La Vista Residencial.Querétaro, Qro. CP76232 Phone: (++52 442) 212-4882 Fax: (++52 442) 214-0536 E-Mail: balluff.mexico@balluff.com

Doc. no. 915329/Mat. no. 239887 EN • G14;

Product specifications, availability, and pricing are

subject to change without notice.