Technical SpecificationsSENNEBOGEN Rubber Tired Material Handler

EngineModel Cummins QSB6.7, Tier 4 FinalNet Power 225 HP (168 kW)

Operating WeightM/rubber tired 84,900 lb (38,500 kg)

Leading Through Innovation

Reachstandard 50'1" (15.26 m) (stick pin)

Magnet Systemrating 20 kW

2

Technical Specifications 830 M “E”

Subject to technical modification.

ENGINEmodel Cummins QSB6.7-C225type in-line, 6 cylinder, cooled exhaust gas recirculation, water cooledemission EPA Tier 4 Final net power 225 HP (168 kW) @ 2,000 rqminjection high pressure common-raildisplacement 6.7 L (408 cu.in.)bore 4.21 in (107 mm)stroke 4.88 in (124 mm)aspiration turbo charged, charge air cooledfuel tank 132 gal (500L)air filtration direct flow filtration system dual stage filter with pre-filtercontrol integrated ECM automatic idle - stop eco mode

ELECTRICALalternator 100 V/Ahstarter 24 V, 7.8 kWbattery 2 x 12 V, 150 Ahlights 2 x cab roof, type halogen 2 x frame upper carriage, type H4

HYDRAULIC SYSTEMsystem type LUDV load sensing pilot pressure controlled open centerpump type variable-displacement axial-piston pumpmax. pump flow 137 gpm (520 l / m)max. pressure 5,076 psi (350 bar)hydraulic tank 82 gal (310 L)hydraulic system 180 gal (680 L)filtration dual filtration system 3 micron (HydroClean)

COOLINGcooling type cool-on-demand, suction-type fan system, side by sidehydraulic / water hydraulic fan drive axial piston pump, reversible fan thermo- statically controlled, closed loop system charge air direct fan drive

WEIGHToperating weight 84,900 lb (38,500 kg)

SWING SYSTEMswing speed 0 - 8 rpmswing hydraulic open loopdrive 1 x axial piston motor driving planetary gearbox, integrated brake valvesswing brake multidisc brake, spring loadedswing bearing external teeth, sealed ball bearing

TRAVEL / UNDERCARRIAGEtype rubber tired MP30Edrive system all-wheel drive, variable displacement motor with dual stage power shift transmissiontravel speed 1st 0-4.35 mph (0-7 km/h) 2nd 0-12.43 mph (0-20 km/h)tires 8 x 12.00-20 (solid rubber)steering joystick steeringfront axle oscillating with hydraulic lock, integrated safety check valvesrear axle fixedservice brake disc brakeparking brake multidisc brake spring loadedsafety travel alarm

REFILL CAPACITIESfuel tank 132 gal (500 L)engine cooling system 13.20 gal (50.0 L)engine oil w / filter 4.49 gal (17.0 L)hydraulic tank 82 gal (310 L)hydraulic system 180 gal (680 L)swing gear 1.06 gal (4.0 L)axle hub (front axle) 031 gal (1.2 L)axle hub (rear axle) 0.39 gal (1.5 L)axle differential (front axle) 6.9 gal (26.0 L)axle differential (rear axle) 5.1 gal (19.5 L)axle transmission 0.8 gal (3.0 L)swing ring lubrication reservoir 0.26 gal (1.0 L)central lubrication reservoir 5.5 lb (2.5 kg)diesel exhaust fluid 7.93 gal (30 L)

MAGNET SYSTEMrating 20 kWvoltage (magnetized) 230 Vcurrent (cold condition) 87 Ampscontroller Hubbellgenerator Baldordrive hydraulic

3Subject to technical modification. Standard Equipment Optional Equipment

Standard / Optional Equipment 830 M “E”ENGINEWater separator in fuel line Automatic idle / engine stop control Eco mode Visual fuel tank check Engine block & water separator pre-heater

ELECTRICBattery disconnect switch Centralized fuse box Battery jump start connection from ground level

HYDRAULICPilot pressure controlled variable displacement pump Thermostatically controlled cooling system Centralized hydraulic test ports Protection covers for pilot pressure control valves 3 micron dual filtration system Load sensing, flow on demand hydraulic system Optimized Hydraulic pump regulation (GLR) Visual hydraulic tank check from ground level Attachments open, close & rotation hydraulics Hydraulic tank shut off valve Electrical hydraulic tank pre-heater Biodegradable hydraulic oil Hydraulic circuit for scrap shear Hydraulic circuit for hammer, breaker Hydraulic circuit for circuit slasher Additional hydraulic circuits Attachment return filtration filters (60 µm)

UPPER CARRIAGERearview & right side view camera system Automatic lubrication system Anti-slip mats on walking area Lockable side doors Handrails on top of upper carriage Mirror left side Turning signal lights in upper carriage frame Removable panels Additional light package Custom colors Seawater paint coating

OPERATORS CAB (maXCab) Hydraulic elevating cab system E260 Multi adjustable, air suspended operators seat 3” (76 mm) seat belt Seat heater Automatic climate control (heater / AC) Air outlets w / defroster Storage area for lunch box Large cup holder Fire extinguisher Tinted windows with safety glass Door window as sliding window AM / FM Radio with CD player & speakers Removable floor mat SenCon diagnostic system Multicolor monitor Tilt out front window Halogen light package on cab roof Mechanical hour meter Sliding door Catwalk w / handrail 12 V / 24 V power outlet Windshield wiper and washers Emergency exit hammer Safety lever Sun shades Interior lighting Rain cover over front window Outside mirror

OPERATORS CAB (maXCab) Optical and acoustic warning system Positive filtered ventilation (pressurized cab) Safety check valves for elevating cab cylinder Foot rest maXCab industry Windshield protection guard Skylight protection guard Skylight FOPS guard Bullet proof windshield Bullet proof skylight Polycarbonate side windows Additional light package Fixed cab elevation Hydraulic elevating up and out cab E300/260 Operators cab with floor window Steering column instead of joystick steering Steering column in combination with joystick steering Additional cameras

UNDERCARRIAGERobust designed material handling under carriage Heavy duty axles Solid rubber tires 12.00-20 (8x) incl. intermediate ring Front axle automatic oscillating axle unlock (travel position) Dual stage power shift transmission Drive train protection guards Travel alarm Centralized lubrication points 2 circuit servo brake system 4-point outriggers integrated safety check valves in outrigger cylinders Tool and storage compartments, lockable Individual outrigger control Increased size outrigger pads to decrease ground pressure Pneumatic tires 12.00-20 (8x) Towing hitch package Below grade, bent outrigger legs Increased size outrigger pads to decrease ground pressure

WORKING EQUIPMENTPurpose built material handling boom Purpose built material handling stick Attachment hydraulic line connections with ball valves Safety check valves for stick cylinders Safety check valves for boom cylinders Cylinder end position dumping Boom hoist limitation Bronze bushings connected to automatic lubrication system Stick limitation Halogen light package boom Purpose built material handling stick with reversing linkage Purpose built material handling boom for scrap shears

MAGNET SYSTEMHydraulic driven generator Magnet controller Magnet suspension link

ATTACHMENTSOrange peel grapple Mag grapple Clamshell Magnet Log grapple Scrap shear Power attachment Pipe handler Live heel

SWING SYSTEM360° protection cover, removable Manual operated swing gear pinion lubrication system

4

[12.7]27,998

[16.8]37,037

[7.2]15,873

[4.8]10,582

[4.6]10,141

[5.0]11,023

[9.6]21,164

[10.8]23,810

[12.1]26,676

[13.0]28,660

[12.3]27,117

[9.0]19,841

[8.3]18,298

[4.8]10,582

[6.0]13,228

[7.7]16,975

[8.2]18,078

[8.9]19,621

[9.6]21,164

[10.1]22,266

[10.3]22,707

[10.1]22,266

[9.5]20,944

[8.4]18,519

[4.9]10,803

[5.9]13,007

[6.6]14,550

[6.6]14,550

[6.8]14,991

[7.2]15,873

[7.6]16,755

[8.0]17,637

[8.3]18,298

[8.4]18,519

[8.2]18,078

[7.8]17,196

[6.9]15,212

[4.8]10,582

[5.8]12,787

[6.1]13,448

[6.2]13,669

[6.4]14,109

[6.6]14,550

[6.9]15,212

[7.0]15,432

[7.0]15,432

[6.9]15,212

[6.4]14,109

[5.7]12,566

[4.4]9,700

[5.4]11,905

[5.6]12,346

[5.7]12,566

[5.9]13,007

[6.0]13,228

[6.0]13,228

[6.0]13,228

[5.8]12,787

[5.3]11,684

[4,5]9,921

[4,8]10,582

[5.2]11,464

[5.2]11,464

[5.3]11,684

[5.2]11,464

[5.1]11,243

[4.8]10,582

[4.3]9,480

[4,2]9,259

[4,3]9,480

[4,2]9,259

[4,1]9,039

Meters

Feet

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

50 10 15 20 25 30 35 40 45 50

Meters Feet

0

5

10

15

20

25

30

-10

-5

-15

-20

35

40

45

50

55

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support on outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided by Sen-nebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

K15

Working Equipment K15

reach 50'1" (15.24 m)boom 27'11" (8.5 m)stick 23' (7.0 m)

Operator’s Cab

model E270 maXCab hydraulic elevating up 8'8" (2.65 m) elevation eye level approx. 18' (5.5 m)

Undercarriage

model MP30E 4-point outriggerstires 8 x 12.00-20 solid rubber

machine shown in mirror image

Lift Capacities830 M “E”

5

Lift Capacities830 M “E”

[5.7]12,566

[6.0]13,228

[5.8]12,787

[9.1]20,062

[9.9]21,826

[10.9]24,030

[11.8]26,014

[12.2]26,896

[7.9]17,416

[7.1]15,653

[6.0]13,228

[7.1]15,635

[7.2]15,873

[7.3]16,096

[7.6]16,755

[8.0]17,637

[8.6]18,960

[9.0]19,841

[9.3]20,503

[9.2]20,282

[8.7]19,180

[7.7]16,975

[6.0]13,228

[6.3]13,889

[6.4]14,109

[6.5]14,330

[6.8]14,991

[7.1]15,653

[7.3]16,094

[7.4]16,314

[7.4]16,314

[7.0]15,432

[6.3]13,889

[5.6]12,346

[5.6]12,346

[5.8]12,787

[6.0]13,228

[6.1]13,448

[6.1]13,448

[5.7]12,566

[5.0]11,023

[5.0]11,023

[5.1]11,243

[5.1]11,243

[5.2]11,464

[5.2]11,464

[5.1]11,246

[5.0]11,023

[4.6]10,141

[3.9]8,589

[4.5]9,921

[4.5]9,921

[4.4]9,700

[4.3]9,480

[4.0]8,818

[3.5]7,716

Meters

Feet

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

50 10 15 20 25 30 35 40 45 50

Meters Feet

0

5

10

15

20

25

30

-10

-5

-15

-20

35

40

45

50

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support on outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided by Sen-nebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

K14ULM

Working Equipment K14 ULM

reach 47'6" (14.47 m)boom 27'11" (8.5 m)stick 19'8" (6.0 m)

Operator’s Cab

model E270 maXCab hydraulic elevating up 8'8" (2.65 m) elevation eye level approx. 18' (5.5 m)

Undercarriage

model MP30E 4-point outriggerstires 8 x 12.00-20 solid rubber

machine shown in mirror image

6

9'10

" (3,

000)

11'3

" (3,

420)

10'2" (3,100)

8'5" (2,580) 9'3" (2,830)

11'3

" (3,

420)

9'10

" (3,

000)

21' (

6,42

0)

11'1"

(3,3

90)

8'8"

(2,6

50)

19'10

" (6,

040)

10'2" (3,100)

9'10" (3,000)16'4" (5,000)

18' (5,500)

4'7"

(1

,420

)9'10

" (3,

000)

14'6" (4,450)13'3" (4,040)

9' (2,750)

9"

(270

)

4" (105

)

9' (2,750)

11'1"

(3,3

90)

1'3"

(380

)

H

L

11'2" (3,425)2'2" (675)

9'10

" (3,

000)

11'3

" (3,

420)

10'2" (3,100)

8'5" (2,580) 9'3" (2,830)

11'3

" (3,

420)

9'10

" (3,

000)

21' (

6,42

0)

11'1"

(3,3

90)

8'8"

(2,6

50)

19'10

" (6,

040)

10'2" (3,100)

9'10" (3,000)16'4" (5,000)

18' (5,500)

4'7"

(1

,420

)9'10

" (3,

000)

14'6" (4,450)13'3" (4,040)

9' (2,750)

9"

(270

)

4" (105

)9' (2,750)

11'1"

(3,3

90)

1'3"

(380

)

H

L

11'2" (3,425)2'2" (675)

Transport width 9' (2,750 mm)

830 M “E“ with undercarriage type MP30E (series) with hydraulic elevating cabin type E270

830 M “E” with hydraulic elevating and forward moving cabin type E300/260

Transport dimensions830 M “E”

7

9'10

" (3,

000)

11'3

" (3,

420)

10'2" (3,100)

8'5" (2,580) 9'3" (2,830)

11'3

" (3,

420)

9'10

" (3,

000)

21' (

6,42

0)

11'1"

(3,3

90)

8'8"

(2,6

50)

19'10

" (6,

040)

10'2" (3,100)

9'10" (3,000)16'4" (5,000)

18' (5,500)

4'7"

(1

,420

)9'10

" (3,

000)

14'6" (4,450)13'3" (4,040)

9' (2,750)

9"

(270

)

4" (105

)

9' (2,750)

11'1"

(3,3

90)

1'3"

(380

)

H

L

11'2" (3,425)2'2" (675)

Transport dimensions830 M “E”

Under our policy of continuous improvements we reserve the right to change specifications, materials and design without prior notice. The illustrations shown may include optional equipment. Always refer to the appropriate operation and maintenance manual for specific product information. See your local SENNEBOGEN dealer for further information. © 2013 SENNEBOGEN LLC, all rights reserved, printed in the USA.

Undercarriage Radius 1 Radius 2 Radius 3

830 M “E” MP30E 36'8" (11.2 m) 41' (12.5 m) 58'7" (17.9 m)

transport dimensions valid for boom position 1 only • boom position 2 may increase transport height & transport length • handrails, catwalks & other accessories are disassembled for transportation • *optional cab E300/260 will increase machine transport height by 2" (50 mm)

radius 3

radius 1

radius 2

830 M “E” with undercarriages type MP30E

Reach Boom Length Stick Length Transport Length Transport Height* Transport Width

K15-1 27'11" (8,500 mm) 23' (7,000 mm) 40'10" (12,450 mm) 11'2" (3,400 mm) 9' (2,750 mm)

K14-1 ULM 27'11" (8,500 mm) 19'8" (6,000 mm) 40'10" (12,450 mm) 11'2" (3,400 mm) 9' (2,750 mm)

GO FOR GREEN www.sennebogen-na.com

SENNEBOGEN LLC 1957 Sennebogen TrailStanley, NC 28078, USA

Phone +1 (704) 347-4910Fax +1 (704) 347-8894Email sales@sennebogenllc.com

830M

/E-0

315

“Under our policy of continuous improvements we reserve the right to change specifications, materials and design without prior notice. The illustrations shown may include optional equipment. See your SENNEBOGEN dealer for further information.” © 2015 SENNEBOGEN LLC, all rights reserved, printed in USA