Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie...

24
Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie Patrick Bloem Jess Tate Devin Pentecost Caleb Pentecost Advisor Dr. Osterberg

Transcript of Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie...

Page 1: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

1University of Portland School of Engineering

Project LED Cube

• Team Stolen Pie– Patrick Bloem– Jess Tate– Devin Pentecost– Caleb Pentecost

AdvisorDr. Osterberg

Page 2: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

2University of Portland School of Engineering

Introduction

• An Interactive 3D MEMS Display• Uses accelerometers• LED Cube

Page 3: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

3University of Portland School of Engineering

MilestonesStatus Description

Original Target

Previous Target

Present Target

Complete Final Budget Complete 11/12/11 11/12/11 11/12/11

Complete Design Document v1.0 approved 11/19/11 11/19/11 11/19/11

Complete Final MOSIS Edif Files complete 11/21/11 11/21/11 11/21/11

Complete Initial CPLD/FPGA Macro Model Complete 12/4/11 12/4/11 12/9/11

Complete Peer Evaluations/Lab Notebooks Due 12/5/11 12/5/11 12/5/11

Complete Place casing request 1/27/12 1/27/12 1/27/12

CompleteCPLDs programmed and determined if

functional2/3/12

2/3/12 2/3/12

Complete Wire wrap tutorial complete 2/10/12 2/10/12 2/3/12

On Track LED cube constructed 2/24/12 2/24/12 2/3/12

On Track Circuit complete with macro models 3/9/12 3/9/12 2/27/12

On Track Packaging/Casing Complete 3/9/12 3/9/12 2/27/12

On Track MOSIS chips received 3/19/12 3/19/12 3/19/12

On Track Circuit complete with MOSIS chips 3/23/12 3/23/12 3/23/12

On Track Microcontroller program complete (w/ no attract mode)

3/30/123/30/12 3/30/12

On Track March Program Review 4/5/12 4/5/12 4/5/12

Page 4: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

4

Accomplishments

University of Portland School of Engineering

• Macro Models programmed and tested• Iterator Macro Model: CPLD• SAM Macro Model: FPGA in Verilog

• Made Full System Schematic• Cube platters constructed

Page 5: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

5University of Portland School of Engineering

Project Proposal

Functional Specification

MOSIS Chip Design and Macro

Model Creation

MOSIS Fabrication (by

foundry)

Design Document

Construct Cube

Assemble Circuits

Test and Debug

Founder's Day Display

Software Frameworking

Microcontroller Programming

Design Approach

Page 6: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

6University of Portland School of Engineering

Top Level System Diagram

Page 7: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

7

System Schematic

University of Portland School of Engineering

Page 8: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

8University of Portland School of Engineering

Top Level System Diagram

Page 9: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

9

SAM MOSIS

University of Portland School of Engineering

Page 10: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

10

SAM MOSIS

University of Portland School of Engineering

Page 11: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

11University of Portland School of Engineering

Top Level System Diagram

Page 12: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

12

Iterator MOSIS Schematic

University of Portland School of Engineering

Page 13: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

13

Iterator MOSIS Layout

University of Portland School of Engineering

Page 14: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

14University of Portland School of Engineering

Top Level System Diagram

Page 15: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

15

LED Cube

University of Portland School of Engineering

Page 16: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

16

SolidWorks CAD

University of Portland School of Engineering

Page 17: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

17

Construction Process

University of Portland School of Engineering

Page 18: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

18University of Portland School of Engineering

Top Level System Diagram

Page 19: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

19

555 Timer Oscillator

University of Portland School of Engineering

Page 20: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

20University of Portland School of Engineering

Top Level System Diagram

Page 21: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

21

Triple Axis Accelerometer

• Demonstration

University of Portland School of Engineering

Page 22: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

22University of Portland School of Engineering

Plans

• Finish LED Cube Construction

Page 23: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

23University of Portland School of Engineering

Concerns/Issues

• LED Cube Construction Issues• Size Constraints in Electronics Box• LED Failure

– Visual Fault Tolerance

Page 24: Senior Design 1 University of Portland School of Engineering Project LED Cube Team Stolen Pie –Patrick Bloem –Jess Tate –Devin Pentecost –Caleb Pentecost.

Senior Design

24University of Portland School of Engineering

Conclusions

• Project is on schedule.• Implementation going well.