Senco Product Catalog

46

description

 

Transcript of Senco Product Catalog

Page 1: Senco Product Catalog
Page 2: Senco Product Catalog

Finish & Trim 3-1115 Gauge16 Gauge18 Gauge23 Gauge

Framing 12-1734˚ Framing Nailer20˚ Framing Nailer

34 ,̊ 20˚ Joist Hangers

Roofing 18-21Asphalt/Fiberglass

Cedar Shakes/Clay Tiles

Coil Nailers 22-25Framing/Sheathing

Siding/FencingPallets/Packaging

Staplers 26-32Fine Wire

Medium WireHeavy Wire

Specialty 33-35Pins to Concrete and Steel

Vinyl Siding, Corrugated Hard Wood Flooring

Kits 36Tools & Compressors

Compressors 38-41

Screw Systems 43-49

Fasteners 50-77Finish Nails & Brads,Framing Nails

Coil NailsStaples

SpecialtyScrews: Auto-feed

Accessories 78-86Auto-Feed Screw Accessories

Filters, Regs. & Lubricators GaugesPlugs & Couplers

Air Hoses & Hose AccessoriesOil, Moisture Shield, Tool Lubs.Safety Glasses, Tool Belt Hooks

Gas Tools AccessoriesBatteries and Chargers

Parts Kits

Item Code Tool Index 87Warranty 88

ToolsCordless Finish & Trim NailersFusion: F-15, F-16A ........................................................ 3 F-16S, F-18 ........................................................................ 4Finish & Trim Nailers FIP42XP ............................................................................ 5FIP35Mg , SFN30, FIP33Mg ...................................... 6FIP32 , FIP25XP, SLP20XP . .......................................... 7FIP18Mg, FIP2N1, FIP21LXP ....................................... 8FIP23SXP, FIP23LXP, FIP10 .......................................... 9

Compare Tool Features ..................................... 10-11

Framing & SheathingFramePro®325XP, SN951XP ......................................12FP601, FramePro®325FHRXP, SN952XP ...............13JoistPro™150, JoistPro™250 ..................................... 14PC1195 Hand Nailer, A20 Hand Nailer ................. 15Compare Tool Features .....................................16-17

Roofing RoofPro™455XP, RoofPro™450 .................................18Vinyl Siding Attachment for RP455XP .................18WC150RXP, BC58 Button Cap Stapler .................19A11 Stapling Hammer ...............................................19Cedar Shake Tools, Clay Roof Tile Tools ..............20Compare Tool Features ........................................... 21

Coil Nailer SCN65XP, SCN60XP ....................................................22SCN49, PalletPro™57F ................................................23PalletPro™100, PalletPro™130 ..................................24Compare Tool Features ...........................................25

StaplersSFT10XP - 22-20 ga. ...................................................26SFW09 - 22 ga. . ............................................................27SLS18Mg, SLS150Mg -18 ga. ..................................27SLS20XP - 19 -18 ga. ..................................................28SLS25XP - 18 ga. .........................................................28SKSXP - 18 -16 ga. .......................................................28Compare Fine/Med. Wire Tool Features ...........29WC150XP, WC200XP - 16 ga. ...................................30SNS41 - 17-16 ga. ........................................................30SNS200XP, SNS200XP-BST - 17-16 ga. ................31SQS55XP - 15 ga. ......................................................... 31Compare Med./Heavy Wire Tool Features .......32

SpecialtyPin to Concrete & Steel SCP40XP .........................33SC1XP Senclamp® .......................................................33SC2 Sencor® ..................................................................33Hard Wood Flooring: SHF200 pneumatic L-head cleat nailer .............34SHFS200 pneumatic Stapler ..................................34SLS20XP-HF - 19 ga. Stapler ..................................34Staple Clinch ToolsF75SXP Sisal Anvil ......................................................35F75LXP Clinch Stapler ..............................................35DFPXP Clinch Stapler ................................................35

Compressor & Tool KitsPC0947-Brad Nailer 18 ga. plus Compressor ..36PC0974 Pinner 23 ga. plus Compressor ............36

Compressors PC1010N 1 gal. .................................................... 38 PC1010 1 gal. ....................................................... 38PC0968-Twin tanks 2.5 gals. .............................. 38PC1130 2.5 gals. ................................................. 39 PC1280 6 gals. . .................................................. 39PC0968N 4.5 gals. ............................................. 39

PC1131-Twin tanks 4.3 gals. . ...........................40PC0969 4.5 gals..................................................40PC0970 15 gals. . ................................................40Compare Applications and Features ................. 41

Auto-Feed Screwdriver DS215-18v, DS212-18v, DS312-18v ............... 43 DS235-AC, DS232-AC, DS332-AC .................44

Auto-Feed Attachments & KitsDS220, DS320 Attachments ............................... 45DS425AC, DS440AC kits, ...............................46

Screwdrivers SG4100, SG2510 ................................................... 47Compare Screw Systems .............................. 48-49

Fasteners NailsStaple and Nail Identification Code Charts ......50Finish 15 ga. ................................................................. 51Finish 16 ga. straight & angled .............................52Brads 18 ga Headless & Slight Head ....................52Brads 18 ga., Pins 21 ga. & 23 ga. .........................5330° -34° Smooth ..........................................................5430° -34° Ring & Screw ................................................5530° -34° ProHead Nails - Smooth & Ring .... 56-5734° -20° Metal Connector Nails ..............................5820° Full Round Head - Smooth .............................5920° Full Round Head - Ring ....................................6015° Coil Flooring Full Ring Nails ...........................6015° Coil Framing - Smooth & Ring ...................... 6115° Coil - Screw, Duplex & Wood to Masonry ..6215° Coil - Packaging, Siding & Drywall ..............6315° Coil Carrier Strip Siding - Smooth & Ring .64 15° Roofing Coil - Smooth ......................................64

Staples Fine Wire 22-21 ga. ....................................................65Fine Wire 20-18 ga. ....................................................66Medium Wire 19-18 ga. ............................................67Medium Wire 18-17 ga. ............................................68 Heavy Wire 16 ga. ......................................................69Heavy Wire 16-15 ga. ................................................70

Specialty FastenersConcrete and Steel Pins ...........................................71Corrugated Fasteners ...............................................71L-Head Flooring Cleat & Staples ..........................71Button Cap and Washer Fasteners ......................72

Auto-Feed ScrewsScrews Code Chart ........................................... 73Screw Reference Guide ............................74-77

Accessories Auto-Feed Screw Accessories .......................... 78-80Filters, Regulators & Lubricators Gauges ......... 81Plugs & Couplers ................................................. 81-82Air Hose and Hose Accessories ...................... 82-84Tool Oil, Pump Oil, Moisture Shield, Tool Lub., Tool Cleaner, Tool Coating ......................................84Safety Glasses, Tool Belt Hooks.............................84No-Mar Pads, Drain Plug .........................................85Batteries and Chargers ..............................................85Parts Kits ........................................................................86

Item Code Tool Index ................................................87 SENCO's Limited Warranty .....................................88

TABLE OF CONTENTS

MAKING HARD WORK EASIER

Since 1948, SENCO has been synonymous with professional results, quality, increased productivity and craftsmanship. Customers around the world have put SENCO’s innovative products to work in a variety of demanding applications, counting on them to perform everyday. Today, SENCO continues to pioneer new technologies in all areas of professional fastening solutions.

At SENCO, our mission is to be the undisputed provider of choice for quality fastening solutions that increase productivity and make work safer and easier to perform.

We promise to be a true partner for fastening solutions; focused on the needs of our customers and users by providing expertise and innovations that make hard work easier.

We design and engineer every SENCO fastening system to deliver outstanding results and maximize productivity.

We have a focus on safety because we want everyone who uses our product to have a long and injury free career.

We value input from our users and focus on responsive innovations that make fastening simpler and more efficient.

At SENCO, we are dedicated to bringing you only the best in professional fastening systems.

4270 Ivy Pointe Blvd. | Cincinnati, OH 45245 | 800-543-4596 | www.senco.com

Page 3: Senco Product Catalog

Cordless 2½" Angled Finish Nailer

Cordless 2½" Angled Finish Nailer

F-15 Item #: 5N0001N

F-16A Item #: 5P0001N

ApplicationsFinish and Trim, Baseboard, Cabinets, Chair Rail, Decorative Trim, Door & Window Casing, Furniture Trim, Paneling.

Features• Patented Instant-Shot Design• Robust Aluminum Drive Cylinder• Rugged Aluminum Magazine• Eco-Friendly Energy - 18v Li-ion Battery• Selectable Drive Switch• Nose Mounted LED Light• Adjustable Belt Hook• Thumbwheel Depth-of-Drive• Innovative EZ-Clear Feature• Includes Storage Bag & Charger

ApplicationsFinish and Trim, Baseboard, Cabinets, Chair Rail, Decorative Trim, Door & Window Casing, Furniture Trim, Paneling.

Features• Patented Instant-Shot Design• Robust Aluminum Drive Cylinder• Rugged Aluminum Magazine• Eco-Friendly Energy - 18v Li-ion Battery• Selectable Drive Switch• Nose Mounted LED Light• Adjustable Belt Hook• Thumbwheel Depth-of-Drive• Innovative EZ-Clear Feature• Includes Storage Bag & Charger

SpecificationsItem#: 5N0001NTool Weight: 6.2 lbs (2.81 kg)Height: 13" (330 mm)Length: 13" (330 mm)Width: 3" (76 mm)Battery: Li-ion 18vCharger: 80% in 15 minutes, 100% in 45 MinutesDrives up to 500 fasteners on a single charge

FastenerCapacity: 110 Gauge: 15Range: 1¼" – 2½"Collation: 34˚ angled taped strip

SpecificationsItem#: 5P0001NTool Weight: 6.2 lbs (2.81 kg)Height: 13" (330 mm)Length: 13" (330 mm)Width: 3" (76 mm)Battery: Li-ion 18vCharger: 80% in 15 minutes, 100% in 45 MinutesDrives up to 500 fasteners on a single charge

FastenerCapacity: 110 Gauge: 16Range: 1¼" – 2½"Collation: 20˚ angled glued strip

DA.072

_1¼

__2½

For fasteners see pae 51 Series DA

For fasteners see page 52 Series RH

Scan to learn about the F-15

RH.063

__1¼

__ 2½

The Cordless Tool for any professionalRequiring no fuel cell, compressor or hose. Our Li-ion battery powered finish and brad nailers featuring Fusion Technology are available in 15, 16, and 18 gauge. Delivering the power and utility of a pneumatic tool combined with the convenience of a cordless. The permanently sealed air cylinder maintains constant pressure ensuring an instant shot every time the trigger is pulled with no ramp-up or delay.

3

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

LIMITEDWARRANTY

LIMITEDWARRANTY

CORDLESS FINISH & TRIM WITH FUSION TECHNOLOGY

Scan to learn about FUSION Tools

Scan to learn about the F-16A

LIMITEDWARRANTY

THE CORDLESS TOOL FOR

ANY PROFESSIONALNOTHING ELSE COMPARES

Requires no hose, no compressor, and no costly fuel cells.

Drives like a traditional pneumatic nailer, with the convenience of cordless.

Provides an instant shot when trigger is pulled.

www.senco.com

MAKING HARD WORK

EASIER

Page 4: Senco Product Catalog

2½" Angled Finish Nailer

Cordless 2½" Finish Nailer

F-16S Item #: 6U0001N

ApplicationsFinish and trim, baseboard, cabinets, chair rail, decorative trim, door & window casing, furniture trim, paneling.

Features• Patented Instant-Shot Design• Robust Aluminum Drive Cylinder• Rugged Aluminum Magazine• Eco-Friendly Energy - 18v Li-ion Battery• Selectable Drive Switch• Nose Mounted LED Light• Adjustable Belt Hook• Thumbwheel Depth-of-Drive• Innovative EZ-Clear Feature• Includes Storage Bag & Charger

SpecificationsItem#: 6U0001NTool Weight: 6 lbs (2.72 kg)Height: 13" (330 mm)Length: 11" (276 mm)Width: 3" (76 mm)Battery: One Li-ion 18vCharger: 80% in 15 minutes, 100% in 45 MinutesDrives up to 500 fasteners on a single charge

FastenerCapacity: 110 Gauge: 16Range: ¾" – 2½"Collation: Straight glued strip

A4, M0.063

__¾

__ 2½

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

Whether it's finish & trim, cabinets, furniture, hardwood flooring, trim to steel studs, baseboards, upholstery trim panels to door or window casings, we have the finish tool for you. SENCO offers a wide selection of 15 through 23 gauge finish nailers.

5

DA.072

_1¼

__2½

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

Driver• Machined from high-strength tool steel

Robust Piston/Drive AssemblyThreaded Assembly

Cordless 21⁄8" Brad NailerApplicationsMolding and decorative trim, furniture trim, blind pinning of upholstered and trim panels, scribe molding, cabinets, drawers and picture frames.

Features• Patented Instant-Shot Design• Robust Aluminum Drive Cylinder• Rugged Aluminum Magazine• Eco-Friendly Energy - 18v Li-ion Battery• Selectable Drive Switch• Nose Mounted LED Light• Adjustable Belt Hook• Thumbwheel Depth-of-Drive• Innovative EZ-Clear Feature• Includes Storage Bag & Charger

SpecificationsItem#: 6E0001NTool Weight: 6 lbs (2.72 kg)Height: 13" (330 mm)Length: 11" (276 mm)Width: 3" (76 mm)Battery: One Li-ion 18vCharger: 80% in 15 minutes, 100% in 45 MinutesDrives up to 700 fasteners on a single charge

FastenerCapacity: 110 Gauge: 18 Range: 5⁄8" – 21⁄8"Collation: Straight glued strip

F-18 Item #: 6E0001N For fasteners see page 53 Series AY & AX

AX.0468

__21⁄8

__5⁄8 __5⁄8

AY.0468

__1

4

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

For fasteners see page 51 Series DAFinishPro®42XP Item # 4G0001N

The only time you'll put the FinishPro42XP down is when it's time to go home!

360˚ Adjustable ExhaustNo tools required, quiet design

Rugged Internal Engine DesignHigh-strength driver with threaded connectionMetal cylinder Robust piston

EZ-Clear™ LatchClear jams fast

Two No-Mar PadsProtects woodwork

Belt hookLets the tool go where you go

Adjustable Depth-of-DriveAllows user to achieve precise fastener placement

Unrivaled Durability

Magnesium MainbodyDurable & ultra-light

ApplicationsBaseboards, cabinets, case goods, trim, trim to steel studs, furniture and paneling.

SpecificationsItem#: 4G0001N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 3.87 scfmAir Inlet: 1/4" NPTTool Weight: 4.7 lbs (2.1 kg)Height: 11.25" (286 mm)Length: 13" (330 mm)Width: 3.5" (89 mm)

FastenerCapacity: 104 Gauge: 15Range: 1¼" – 2½"Collation: 34˚ angled taped strip

Never-Lube® DesignOil-free operation

Over-molded GripReduces vibration and fatigue, increases productivity

CORDLESS FINISH & TRIM WITH FUSION TECHNOLOGY

Scan to learn about the F-18

For fasteners see page 52 Series M0 & A4Scan to learn about the F-16S

FINISH & TRIM

Page 5: Senco Product Catalog

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

7

2½" Finish Nailer

For fasteners see page 52 Series MO & A4

ApplicationsBaseboards, cabinets, case goods, chair rail, crown molding, decorative trim, door & window casing, sash and millwork, book shelves and exterior and interior trim.

Features• Adjustable Depth-Of-Drive• Ez-Clear™ Latch• 360˚ Adjustable Exhaust• Comfort Grip• Belt Hook• No-Mar Pad• Includes Case

SpecificationsItem#: 1X0201N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 2.16 scfmAir Inlet: ¼" NPTTool Weight: 4.2 lbs (1.9 kg)Height: 10.88" (276 mm) Length: 12.16" (307 mm)Width: 3" (76 mm)

FastenerCapacity: 110 Gauge: 16Range: 1¼" – 2½"Collation: Straight glued strip

M0, A4.063

__1¼

__ 2½

FinishPro®32 Item #: 1X0201N

1 5⁄8" Brad Nailer

For fasteners see pages 52-53 Series AX & AY

AX.0468

__15⁄8

__5⁄8__5⁄8

AY.0468

__1

ApplicationsDecorative trim, furniture trim, window beading, blind pinning of upholstered and trim panels, rattan, scribe molding, cabinets, drawers and picture frame assembly.

Features• Drives both slight and medium-headed brads• Requires minimum maintenance for trouble-free

upkeep• Muffler ensures quieter operation• Never-Lube® Design• Includes Case

SpecificationsItem#: 430101N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 1.92 scfmAir Inlet: ¼" NPTTool Weight: 2.3 lbs (1 kg)Height: 8.25" (210 mm)Length: 9.5" (241 mm)Width: 2" (50 mm)

FastenerCapacity: 110 Gauge: 18Range: 5⁄8" – 15⁄8"Collation: Straight glued strip

SLP20XP Item #: 430101N

21⁄8" Brad Nailer

For fasteners see pages 52-53 Series AY & AX

ApplicationsDecorative trim, furniture trim, window beading, blind pinning of upholstered and trim panels, rattan, scribe molding, cabinets, drawers and picture frame assembly.

Features• Drives both slight and medium head brads• Adjustable depth-of-drive.• Never-lube® design• Comfort grip• Belt hook• No-mar pad• Includes case

SpecificationsItem#: 760102N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 1.92 scfmAir Inlet: ¼" NPTTool Weight: 2.7 lbs (1.2 kg)Height: 9.9" (251 mm)Length: 9.8" (249 mm)Width: 2.2" (56 mm)

FastenerCapacity: 110 Gauge: 18 Range: 5⁄8" – 21⁄8"Collation: Straight glued strip

AX.0468

__21⁄8

__5⁄8 __5⁄8

AY.0468

__1

FinishPro®25XP Item #: 760102N

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

2" Angled Finish Nailer

For fasteners see page 51 Series DA

ApplicationsFinish and trim, baseboard, cabinets, caskets, chair rail, decorative trim, door & window casing, furniture trim and paneling.

Features• Lightweight – 3.6 lbs.• Never-Lube® Design• Belt Hook – attached to either side • Adjustable Depth-of-Drive • EZ-Clear™ Latch• Adjustable Exhaust for user comfort• Ergonomically Designed Comfort Grip handle• No-Mar Pad – to protect work surfaces• Includes Case

SpecificationsItem#: 620002N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 2.16 scfmAir Inlet: ¼" NPTTool Weight: 3.6 lbs (1.6 kg)Height: 9.62" (244 mm)Length: 12" (305 mm)Width: 3.25" (82.5 mm)

FastenerCapacity: 104 Gauge: 15Range: 1" – 2" Collation: 34˚ angled taped strip

DA.072

_1

__2

SFN30 Item #: 620002N 2½" Angled Finish Nailer

For fasteners see page 52 Series RH

ApplicationsFinish and trim, baseboard, cabinets, caskets, chair rail, decorative trim, door & window casing, furniture trim and paneling.

Features• Magnesium Mainbody-durable & ultra-light• Oil-Free Motor eliminates oil carryover onto the

work surface• Selectable Trigger lets you control the fastening

method with the flip of a switch• Adjustable Depth-of-Drive• EZ-Clear™ Latch• Rotatable Belt Hook and Exhaust • Includes Case, Swivel Plug and Wrench

SpecificationsItem#: 6F0001N Selectable actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 2.22 scfmAir Inlet: ¼" NPTTool Weight: 3.83 lbs (1.74 kg)Height: 11.5" (292 mm)Length: 12" (305 mm)Width: 3" (76 mm)

FastenerCapacity: 110 Gauge: 16Range: 1¼" – 2½"Collation: 20˚ angled strip

RH.063

__1¼

__ 2½

FinishPro®33Mg Item #: 6F0001N

6

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

ApplicationsFinish and trim, baseboard, cabinets, caskets, chair rail, decorative trim, door & window casing, furniture trim and paneling.

Features• Magnesium Mainbody-durable & ultra-light• Oil-Free Motor eliminates oil carryover onto the

work surface• Selectable Trigger lets you control the fastening

method with the flip of a switch• Adjustable Depth-of-Drive• EZ-Clear™ Latch• Rotatable Belt Hook and Exhaust • Includes Case, Swivel Plug and Wrench

SpecificationsItem#: 6G0001N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 3.2 scfmAir Inlet: 1/4" NPTTool Weight: 4.65 lbs (2.1 kg)Height: 12.25" (311 mm)Length: 13" (330 mm)Width: 3.4" (89.6 mm)

FastenerCapacity: 110 Gauge: 15Range: 1¼" – 2½"Collation: 34˚ angled taped strip

DA.072

_1¼

__2½

2½" Angled Finish Nailer

FinishPro®35Mg Item #: 6G0001NFor fasteners see page 51 Series DA

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

FINISH & TRIMFINISH & TRIM

Page 6: Senco Product Catalog

1¼" Brads and 1" Staples

For fasteners see page 53 Series AX and page 67 Series L

AX.0468

_5⁄8

¼

L

1

½

ApplicationsNailing: Furniture repair, cabinets, drawer assembly, case backs, small trim, chair rails, picture frames and ornamentals.Stapling: Shelving, soffits, fascia, cabinets, picture frames and craft assembly.

Features• Drives both brads and staples• Rear Exhaust• Adjustable Depth-Of-Drive• Comfort Grip• No-Mar Pad• Includes Case, Fitting, Oil and Hex Wrench

SpecificationsItem#: 2D0101N, Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 0.84-1.92 scfmAir Inlet: ¼" NPTTool Weight: 2.75 lbs (1.25 kg)Height: 7.75" (196.8 mm)Length: 9.75" (248 mm)Width: 2 .2" (55.6 mm)

FastenerCapacity: 110 Gauge: 18Brad range: 5⁄8" – 1¼"Staple range: ¼" crown, ½" – 1" Collation: Glued strip

FinishPro®2N1 Item #: 2D0101N

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

9

ApplicationsLight wood assembly, finish and trim work, molding and decorative trim, dowel and joint pinning, lightweight paneling, external softwood trim, display and sign work.

Features• Powerful - ensures complete drives into hard

substrates• Automatically adjusts for different fastener

lengths• Reversible belt hook• Rear exhaust with embedded muffler• Ergonomic handle for all-day comfort• Last nail lockout prevents dry-firing• Ultra-narrow nose for tight corners

SpecificationsItem#: 8F0001N Mode of Operation: sequential trigger with lockReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Inlet: ¼" NPTTool Weight: 2.5 lbs (1.1 kg)Height: 7.56" (192 mm)Length: 7.87" (200 mm)Width: 1.85" (47 mm)

FastenerCapacity: 100 Gauge: 23Range: ½"-13/8" (13 mm - 35mm)Collation: Straight glued strip

For fasteners see page 53 for SENCO Headless Pins

13⁄8" Headless Pinner

NEW FinishPro®23SXP Item #: 8F0001N

2" Mediun Head Pinner

ApplicationsLight wood assembly, finish and trim work, molding and decorative trimFeatures• Extra Power – ensures complete drives into hard

substrates• Automatic adjustable magazine• Reversible belt hook• Ergonomic handle for comfortable and all-day

operation• Last nail lockout prevents dry-firing• Onboard storage for extra no-mar pad and jam

clearing wrench• Includes Case, Fittings, Wrench and Tool Oil

SpecificationsItem#: 8M0001N Sequential dual trigger safetyReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 1.2 scfmAir Inlet: ¼" NPTTool Weight: 2.7 lbs (1.2 kg)Height: 8.89" (226 mm)Length: 7.87" (200 mm)Width: 1.85" (47 mm)

FastenerCapacity: 100 Gauge: 21Range: 1" – 2"Collation: Straight glued strip

For fasteners see page 53 for SENCO 21 Ga. Pins

NEW FinishPro®21LXP Item #: 8M0001N

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

LIMITEDWARRANTY

8

2" Headless PinnerApplicationsLight wood assembly, finish and trim work, molding and decorative trim, dowel and joint pinning, lightweight paneling, external softwood trim, display and sign work.

Features• Most powerful tool in its class - ensures

complete drives into hard substrates• Automatically adjusts for different fastener

lengths• Reversible belt hook• Rear exhaust with embedded muffler• Ergonomic handle for all-day comfort• Last nail lockout prevents dry-firing• Ultra-narrow nose for tight corners

SpecificationsItem#: 8L0001NMode of Operation: Sequential trigger with lockReg. Operating Pressure: 70-120 psi (4.8- 8.3 bar)Air Consumption (60 cycles per min.): 1.2 scfmAir Inlet: ¼" NPTTool Weight: 2.7 lbs (1.2 kg)Height: 8.89" (226 mm)Length: 7.87" (200 mm)Width: 2.38" 1.85" (47mm)

FastenerCapacity: 100 Gauge: 23Range: ½"-2" (13 mm - 50 mm)Collation: Straight glued strip

_½ _½

CZ.0267

C Z.0267

_2

For fasteners see page 53 for SENCO Headless PinsNEW FinishPro®23LXP Item #: 8L0001N

21⁄8" Brad Nailer

For fasteners see page 53 Series AX

ApplicationsDecorative trim, furniture trim, window beading, blind pinning of upholstered and trim panels, rattan, scribe molding, cabinets, drawers and picture frame assembly. Features• Magnesium Mainbody - durable & ultra-light• Metal Cylinder for increased durability• Oil-Free Design• Adjustable Depth-of-Drive• Selective Actuation Trigger• Rotatable Rear Exhaust and Belt Hook• Swivel Air Plug• Over-Mold Rubber Comfort Grip• Includes Case and Wrench

SpecificationsItem#: 1U0021N Selectable actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 2.4 scfmAir Inlet: ¼" NPTTool Weight: 2.48 lbs (1.12 kg)Height: 9.75" (248 mm)Length: 10.5" (267 mm)Width: 2.5" (63.5 mm)

FastenerCapacity: 110 Gauge: 18Range: 5⁄8" – 21⁄8"Collation: Straight glued strip

FinishPro®18Mg Item #: 1U0021N

AX.0468

__21⁄8

__5⁄8

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

1

ZX

2

.0294

21GA

_½ _½

CZ.0267

C Z.0267

_2LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

FINISH & TRIMFINISH & TRIM

Page 7: Senco Product Catalog

* Trigger Actuation: S: Sequential, C: Contact, Sel: Selectable

11

FINISH & TRIM

10

COMPARE APPLICATIONS & FEATURES

15 Gauge 15 Gauge 15 Gauge 15 Gauge 16 Gauge 16 Gauge 16 Gauge 16 Gauge 18 Gauge 18 Gauge 18 Gauge 18 Gauge 18 Gauge 21 Gauge 23 Gauge 23 Gauge 23 Gauge

APPLICATIONS F-15 FIP42XP FIP35Mg SFN30 F-16A F-16S FIP33Mg FIP32 F-18 FIP25XP SLP20XP FIP18Mg FIP2N1 FIP21LXP FIP10 FIP23LXP FIP23SXPCabinets ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Baseboards ● ● ● ● ● ● ● ● ● ● ● ● ●

Chair rail ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Decorative trim ● ● ● ● ● ● ● ● ● ● ● ● ●

Door/window casings ● ● ● ● ● ● ● Furniture ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Hardwood floors ● ● ● ●

Molding & trim ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Picture frames ● ● ● ● ● ● ● ● ● ● ● ●

Scribe molding ● ● ● ● ● ● ● ● ● ●

Trim to steel studs ● ● ● ● Window beading ● ● ●

FEATURESFastener Range 1¼"-2½" 1¼"-2½" 1¼"-2½" 1"-2" 1¼"-2½" ¾"-2½" 1¼"-2½" 1¼"-2½" 5⁄8"-21⁄8" 5⁄8"-21⁄8" 5⁄8"-15⁄8" 5⁄8"-21⁄8" ½"- 1¼" 1"-2" ½"- 1" ½"- 2" ½"- 13 ⁄8"

Shank .072" .072" .072" .072" .063" .063" .063" .063" .039" .039" .039" .039" .039" .0298" .0267" .0267" .0267"

Fastener Capacity 110 104 110 104 110 110 110 110 110 110 110 110 110 100 110 100 100

Weight 6.2 lbs 4.7 lbs 4.65 lbs 3.6 lbs 6.2 lbs 6 lbs 3.83 lbs 4.2 lbs 6 lbs 2.7 lbs 2.3 lbs 2.48 lbs 2.75 lbs 2.7 lbs 2.4 lbs 2.7 lbs 2.5 lbs

Height 13" 11.25" 12.25" 9.62" 13" 13" 11.5" 10.88" 13" 9.9" 8.25" 9.75" 7.75" 8.89" 6.75" 8.89" 7.56"

Length 13" 13" 13" 12" 13" 11" 12" 12.16" 11" 9.8" 9.5" 10.5" 9.75" 7.78" 8.89" 7.87" 7.87"

Mainbody Al / Composite Mg Mg Composite Al / Composite Al / Composite Mg Mg Al / Composite Al Al Mg Al AL Al Al Al

Depth-of-Drive ● ● ● ● ● ● ● ● ● ● ● ●

Jam EZ-Clear ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Trigger Actuation* Sel S, C S S, C Sel Sel Sel S Sel S, C S, C Sel S Sel S S S

Belt Hook ● ● ● ● ● ● ● ● ● ● ● ● ● ●

NeverLube/No-oil design ● ● ● ● ● ● ● ● ● ● ●

Exhaust Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Fixed Rear Adj. Rear Rear Adj. Rear Rear Rear

Warranty 2 yrs 5 yrs 5 yrs 5 yrs 2 yrs 2 yrs 5 yrs 5 yrs 2 yrs 5 yrs 5 yrs 5 yrs 5 yrs 5 yrs 5 yrs 5 yrs 5 yrs

Item # 5N0001N 4G0001N 6G0001N 620002N 5P0001N 6U0001N 6F0001N 1X0201N 6E0001N 760102N 430101N 1U0021N 2D0101N 8M0001N 2C0001N 8L0001N 8F0001N

Scan to learn about SENCO Mg Finish Nailers

Page 8: Senco Product Catalog

13

For fasteners see page 54-55 Series HF, GE, HE, GC, HC, KC.Page 57 ProHead Series G5, H5, K5, H6, H6, K6

FRAMING & SHEATHING

ApplicationsFraming, truss building, subflooring, sheathing, decking, siding, fencing, pallets and crate assembly

Features• Selectable Trigger Actuation• Sawtooth Safety that digs in for precision

toenailing• Shorter, straight-line 34˚ magazine for better

line of sight and superior maneuverability• Reliable Internal Design with full round driver• Tool-Free Adjustable Exhaust• Well-balance and powerful• Tool-Free Adjustable Depth-of-Drive • Soft Comfort Grip handle reduces fatigue

SpecificationsItem#: 1G0101N Selectable actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 10 scfmAir Inlet: 3/8" NPTTool Weight: 8 lbs (3.62 kg)Height: 13.5" (343 mm)Length: 15.13" (384 mm)Width: 4.17" (106 mm)

FastenerCapacity: 70Shank Diameter: .113"– .148"Range: 2"– 3½"Collation: 34˚ angled taped strip

3½" Paper Taped Framing Nailer

FramePro®601 Item #: 1G0101N

For fasteners see page 59-60Series GL, HL, GD, HD, KD, MD

3¼" Full Round Head Framing Nailer

ApplicationsFraming, sheathing, truss building, sub-flooring and decks. Other applications include crate and box assembly, pallet making, furniture frame assembly and fencing.

Features• Well balanced and ultra-light – 7.9 lbs.• Uses less air to drive nails – Highly efficient

internal design• Reduced jams and mis-feeds – Patented

TrueDrive™ magazine• Tool-Free Adjustable Depth-of-Drive• Easily fits between studs and joists• Retractable rafter hanger• Contact or sequential trigger actuation –

Patented drive selector

SpecificationsItem#: 4H0001N Selectable actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 5.2 scfmAir Inlet: 3/8" NPTTool Weight: 7.9 lbs (3.58 kg)Height: 11.9" (302 mm)Length: 17.3" (440 mm)Width: 4.5" (114 mm)

FastenerCapacity: 64 Shank Diameter: .113"– .148"Range: 2"– 3¼" Collation: 20˚ angled plastic strip

NEW FramePro®325FRHXP Item #: 4H0101N

_2_2_2

__3__3

__3¼

.113-.120.113-.120 .113-.148

GL, H

L

GD, H

D, KD

, MD

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

ApplicationsFraming, sheathing, truss building, sub-flooring and decks. Other applications include crate and box assembly, pallet making, furniture frame assembly and fencing.

Features• Well balanced and weight only 8.4 lbs.• Uses less air to drive nails – Highly efficient

internal design• Reduced jams and mis-feeds – Patented

TrueDrive™ magazine• Tool-Free Adjustable Depth-of-Drive• Easily fits between studs and joists• Retractable rafter hanger• Contact or sequential trigger actuation –

Patented drive selector

SpecificationsItem#: 5A0001N Selectable actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 7.9 scfmAir Inlet: 3/8" NPTTool Weight: 8.4 lbs (3.8 kg)Height: 13.57" (345 mm)Length: 20.3" (516 mm)Width: 4.75" (121 mm)

FastenerCapacity: 64 Shank Diameter: .120"–.162"Range: 23⁄₈"– 3½"Collation: 20˚ angled plastic strip

_2 3⁄8_2 3⁄8_2 3⁄8

__3__3

__3½

.120.120 .120-.162

GL, H

L

GD, H

D, K

D, M

D, M

0

_2½

__3

.120

HJ: R

oof T

ile N

ail w

ith o

vers

ize h

ead

SN952XP Item #: 5A0001N For fasteners see page 59-60Series GL, HL, GD, HD, KD, MD

3½" Full Round Head Framing Nailer34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

__3 __3

__3½__3½__3½

_2_2_2_2

.120 .113-.120 .113 -.148

HF27

GE, H

E

GC, H

C, K

C

.113-.131

G5, H

5, K

5

.113-.131

G6, H

6, K

6

12

FRAMING & SHEATHING

Applications For engineered lumber, framing, sheathing, truss building, sub-floor, decking, crate, box assembly, pallet making, furniture frame assembly, fencing and industrial applications.

Features• 20% more powerful than standard framing

nailers – yet weighs only 8.5 lbs.• Tool-Free Adjustable Depth-of-Drive • Retractable Rafter Hanger• Reduced jams and mis-feeds – Patented TrueDrive™ Magazine• Low profile design fits easily between studs

and joists.• Contact or Sequential Trigger Actuation –

Patented drive selector

SpecificationsItem#: 5B0001N Selectable actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 7.9 scfmAir Inlet: 3/8" NPTTool Weight: 8.5 lbs (3.86 kg)Height: 13.8" (351 mm)Length: 17.3" (440 mm)Width: 4.76" (121 mm)

FastenerCapacity: 83Shank Diameter: .113" – .148"Range: 23⁄8"– 4"Collation: 34˚ angled taped strip

SN951XP Item # 5B0001N

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

__3 __3

__3½

_2 3⁄8_2 3⁄8_2 3⁄8_2 3⁄8

.120 .113-.131 .113-.148

HF2

7

GE,

HE,

GC,

HC,

KC,

__4

.131

KC

31

__3½__3½

.113-.131

G5,

H5,

K5

.113-.131

G6,

H6,

K6

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

For fasteners see page 54-55 Series HF, GE, HE, GC, HC, KC.Page 57 ProHead Series G5, H5, K5, H6, H6, K6

ApplicationsFraming, sheathing, truss building, sub-flooring and decks. Other applications include crate and box assembly, pallet making, furniture frame assembly and fencing.

Features• Well balanced, ergonomic design• Highly efficient internal design, means less

wear and tear on the compressor• Dry Fire Lockout• Reduced jams and mis-feeds - Patented TrueDrive magazine• Aggressive toenail safety • Fits easily between studs and joists• Retractable Rafter Hanger• Contact or sequential trigger actuation -

Patented drive selector

SpecificationsItem#: 4Z0101N Selectable actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 5.2 scfmAir Inlet: 3/8" NPTTool Weight: 7.9 lbs (3.58 kg)Height: 11.9" (302 mm)Length: 17.3" (440 mm)Width: 4.5" (114 mm) FastenerCapacity: 83 Shank Diameter: .113" - .148"Range: 2"– 3¼" Collation: 34˚ angled taped strip

3¼" Paper Taped Framing Nailer

NEW FramePro®325XP Item #: 4Z0101N

LIMITEDWARRANTY

__3

__3¼__3¼__3¼__3¼

.120 .113-.131.113-.148

HF 2

7

GE, H

E

GC, H

C, K

C

_2 _2 _2_2

.113-.131

G5, H

5, K

5

.113-.131

G6, H

6, K

6

4" Paper Taped Framing Nailer

Scan to learn about FramePro®325XP

SENCO offers a wide selection of strip and coil framing and sheathing nailers. So whether you are framing, sheathing, truss building, sub-flooring, decking, crate and box assembly, pallet making or fencing, we have the tool for you.

For fasteners see page 54-55 Series HF, GE, HE, GC, HC, KC.Page 57 ProHead Series G5, H5, K5, H6, H6, K6

Page 9: Senco Product Catalog

__3½

_2

__3½

_2

__3½

_2

Mini Hand Nailer Item #: PC1195

2" - 3½" Bulk NailerApplicationsJoist hangers, foundation anchors, seismic and hurricane straps, ties and other metal framing hardware.

Features• Compact & powerful enough to drive 2”- 3 ½”

bulk nails• Small size for accessibility• Ultra-light at just 1 lbs• Magnetic Nose holds nail in place for safe,

accurate placement• Nail point can be easily placed within a recess for

safe, efficient fastening• Included Fitting provides plug-and-play

convenience out of the box• 6 per case in a retail friendly display package

SpecificationsItem #: PC1195Reg. Operating Pressure: 60-110 psi (4-7.6 bar)Air Consumption (60 cycles per min.): 2-4 scfmAir Inlet: 1/4" NPTTool Weight: 1 lbs (.45 kg)Height: 4" (101 mm)Length: 2.75" (70 mm)Width: 2" (55.6 mm)

FastenerCapacity: 1 Range: Bulk nails from 2"- 3½"

__7

_2

__7

_2

__7

_2

ApplicationsJoist hangers, foundation anchors, seismic and hurricane straps, ties and other metal framing hardware.

Features• Drives bulk nails from 2" to 7"• Soft rubber palm pad for comfortable grip• Magnetic Nose holds nail in place for safe,

accurate placement• Includes Leather Strap - reduces fatigue

SpecificationsItem #: PC0781Reg. Operating Pressure: 50-125 psi (3.5-8.4 bar)Air Consumption (60 cycles per min.): 2-4 scfmAir Inlet: 3/8" NPTTool Weight: 2.4 lbs (1.1 kg)Height: 5.8" (122 mm)Length: 4" (101 mm)Width: 3.25" (83 mm)

FastenerCapacity: 1 Range: Bulk nails from 2"- 3½" and up to 7" with optional guide tips

2" - 7" Bulk Nailer

A20 Hand Nailer Item # PC0781

These little hand nailers are light, well-balanced and are easy to handle because of their soft rubber hand pad and size. A magnetic nail guide holds nail in place. Just a little pressure activates the firing mechanism for trouble-free fastening. Both are ideal for joist hangers, metal straps, ties and other metal framing hardware.

15

JOIST HANGER NAILERSJOIST HANGER NAILERS

14

LIMITEDWARRANTY

LIMITEDWARRANTY

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

LIMITEDWARRANTY

LIMITEDWARRANTY

For fasteners see page 58 Series KJ, MD, ND

1½"- 2½" Metal Connector Nailer

1½" Metal Connector Nailer

ApplicationsJoist hangers, foundation anchors, seismic and hurricane straps and ties, post caps and bass, plus many other metal framing hardware.

Features• Nose piece probe locates metal connector

holes providing accurate nail placement• Lightweight and well-balanced• Dry-fire lockout• Powerful enough to drive through engineered

lumber• Adjustable rafter hanger• Tool-Free adjustable exhaust deflector

ApplicationsJoist hangers, foundation anchors, seismic and hurricane straps and ties, post caps and bass, plus many other metal framing hardware.

Features• Leads with the nail tip, providing accurate

placement into metal connector holes – patent pending nosepiece design

• Lightweight and well-balanced• Dry-fire lockout• Powerful enough to drive through engineered

lumber• Adjustable rafter hanger• Tool-Free adjustable exhaust deflector

SpecificationsItem #: 6K0001N Sequential Trigger Reg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption: (60 cycles per min.) 4.1 scfmAir Inlet: 3/8" NPTTool Weight: 5.9 lbs (2.68 kg)Height: 14.1" (359 mm)Length: 13.8" (350 mm)Width: 4.3" (110mm)

FastenerCapacity: 20 Shanks: .131"-.162" Range: 1½"-2½"Collation: 34˚paper tape strip

SpecificationsItem #: 7L0001N Sequential Trigger Reg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption: (60 cycles per min): 2.3 scfmAir Inlet: 3/8" NPTTool Weight: 4.6 lbs (2.08 kg)Height: 11.97" (302 mm)Length: 10.35" (263 mm)Width: 4.0" (100 mm)

FastenerCapacity: 30 Shanks: .131"-.148"Range: 1½" Collation: 34˚paper tape strip For fasteners see page 58Series KJ, MD

JoistPro™250XP Item #: 6K0001N

JoistPro™150XP Item #: 7L0001N

We Provide A Range Of Tools and Fasteners For Metal Framing Hardware.

Build it Safer and Faster with our Metal Connector System

_1½

.131 .148

KJ

MD

_1½

.131 .148, .162

_2½KJ

, MD,

ND

Scan to learn about JoistPro nailers

Page 10: Senco Product Catalog

* Trigger Actuation: S: Sequential, C: Contact, Sel: Selectable

17

FRAMING & SHEATHING

16

APPLICATIONS FramePro325XP SN951XP FramePro 601 JoistPro150XP JoistPro250XP FramePro325FRHXP SN952XP Mini Hand Nailer A20

Framing/Sheathing ● ● ● ● ● ● ●

Truss building ● ● ● ● ● ● ●

Subflooring ● ● ● ● ● ● ●

Decking ● ● ● ● ● ● ●

Fencing ● ● ● ● ● ● ●

Pallets ● ● ● ● ●

Crate, boxes ● ●

Siding ● ● ● ●

Clay tiles ● ● ●

Wood to green concrete ● ●

Metal framing hardware ● ● ● ●

FEATURES

Fastener Range 2"-3¼" 23�8"- 4" 2"-3½" 1½" 1½"- 2½" 2"-3¼" 23�8"-3½" 2"-3½" 2"-7

Shank .113"-.148" .113"-.148 " .113"-.148" .131"-.148" .131"-.162" .131"- .148" .131"- .162"

Fastener Capacity 83 83 70 30 20 64 64 1 1

Weight 7.9 lbs 8.5 lbs 8 lbs 4.6 lbs 5.9 lbs 7.9 lbs 8.4 lbs 1 lb 2.4 lbs

Height 11.9" 13.8" 13.5" 11.97" 14.1" 11.97" 14.1" 4" 5.8"

Length 17.3" 17.3" 15.13" 10.35" 13.8" 17.3" 20.3" 2.75" 4"

Depth-of-Drive ● ● ● ● ●

Trigger Actuation* Sel. Sel. Sel. S S Sel. Sel.

Rafter Hook ● ● ● ●

Warranty 5 yrs 5 yrs 5 yrs 5 yr 5 yr 5 yrs 5 yrs 1 yr 1 yr

Item # 4Z0101N 5B0001N 1G0101N 7L0001N 6K0001N 4H0001N 5A0001N PC1195 PC0781

20o Full Round Head Nailers 30o-34o Paper Tape Collation Nailers

COMPARE APPLICATIONS & FEATURES

Page 11: Senco Product Catalog

1" Crown 1½" Roofing Stapler

For fasteners see page 70 Series P

P

1

_3∕4

_1½

Applications:Asphalt and fiberglass shingles, roofing felt, carton-to-skid, furniture frames, wire lathing, butt-joints, and foam insulation board .

Features• Adjustable Depth-of-Drive • Carbide Wear Plates protect tool from shingles• High-Strength Composite Magazine helps

eliminate skipping, jams, and misfires• EZ -Clear Latch provides easy access to clear

fasteners• Long Lasting Wear Plates and Carbide Safety• Rotating Belt Hook makes the tool portable and

easily to stow

SpecificationsItem#: 4X0001N: Contact actuation triggerOperating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 3.18 scfmAir Inlet: 3/8" NPTTool Weight: 5.5 lbs (2.5 kg)Height: 9" (229 mm)Length: 15.25" (387 mm)Width: 4" (105 mm)

FastenerCapacity: 160 Gauge: 16Crown: 1" Range: ¾" – 1½" Collation: Straight glued taped strip

½" Crown 5⁄8" Staple + 1" Button Cap

For fasteners see page 72 Series M004092 Button Cap

Applications For house wrap and roofing felt installation.

Features• Cap Capacity – 110 cap collation • Easy Load System for staples and caps• Aluminum Housing – ultra-light 4.1 lbs. • Balanced and fast for high production• Belt Hook • Side Mount Cap Collator – holds caps regardless

of tool position• Includes Case, Hex Wrenches, Tool Oil, ¼” Male

Coupler and Manual

SpecificationsItem#: 4A0001N Contact actuation triggerReg. Operating Pressure: 60-95 psi (4.1-6.5 bar)Air Inlet: 1/4" NPTTool Weight: 4.1 lbs (2 kg)Height: 8.5" (216 mm)Length: 12.5" (317 mm)Width: 3.5" (89 mm)

FastenerCapacity: 110Item#: M0040922200 button caps and staples per box.Staple:Gauge: 21, Crown ½" Range: 5⁄ 8” galv.Cap: 1” plastic, driven with staple in tandem.

5⁄8__

1

2200 button caps and staples per box.Drives 21 ga. staples with 1” plastic caps in tandem.

Crown: 1⁄2 (12.7mm)Gauge: 21

½

M004092

7⁄16" Crown 3⁄8" Hammer Stapler

For fasteners see page 66 Series H

Applications Fast and hose free stapler for installation of roofing felt, plastic sheeting, moisture wrap and insulation.

Features• Rugged all-Steel Construction• Easy to service and maintain• Comfortable Fluted Handle with Grip• Magazine holds 168 staples

SpecificationsItem#: PC0700Tool Weight: 2 lbs (.9 kg)Height: 1.75" (44.4 mm)Length: 12.3" (312.4 mm)

FastenerCapacity: 168 Gauge: 20Range: 3⁄8"Crown: 7⁄16"

19

WC150RXP Item #: 4X0001N

BC58 Button Cap Stapler Item #: 4A0001N

A11 Stapling Hammer Item #: PC0700

__3⁄8

H7⁄16

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

18

1¾" Coil Nailer

For fasteners see page 64 coil roofing nails

ApplicationsAsphalt and fiberglass shingle nailing, for new roofs and reroofing. Attaching waterproof tar paper, metal drip edges, insulation board, and with an optional attachment MA0013 for vinyl and aluminum siding.

Features• Aluminum Mainbody and Cap • Easy one-handed operation, just 5.4 lbs.• Tool-Free Adjustable Depth-of-Drive• Durable Molded Comfort Grip• 360˚ Tool-Free Adjustable Exhaust• Adjustable Shingle Guide• Steel Wear plates reduce shingle abrasion• Adjustable Nail Canister• Tool Includes Case, Tool Oil and Wrench

SpecificationsItem#: 3D0101N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 6.54 scfmAir Inlet: 1/4" NPTTool Weight: 5.4 lbs (2.5 kg)Height: 10.5" (267 mm)Length: 10.25" (260 mm)Width: 4.5" (50 mm)

FastenerCapacity: 120 Gauge: 11 (.120") (3.0 mm)Range: ¾" – 1¾"Collation: Angular, flat wire wound coil

SENCO has dependable tools for all your roofing applications, including our popular RoofPro™ Coil Nailers and our 1" Wide Crown WC150RXP Stapler for asphalt and fiberglass shingle fastening. For installing house wrap and felt paper we offer the BC58 Button Cap Stapler and A11 Stapler.

1¾" Coil Nailer ApplicationsFor asphalt and fiberglass shingle nailing, for both new roofs and reroofing. Also for attaching waterproof tar paper, metal drip edges, insulation board.

Features• Aluminum Mainbody and Cap• Adjustable Depth-of-Drive • 360° Adjustable Exhaust and Adjustable Shingle

Guide• Steel Wear plates reduces shingle abrasion• Adjustable Nail Canister • Tool Includes Case, Tool Oil and Wrench

SpecificationsItem#: 3C0001N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 5.79 scfmAir Inlet: 1/4" NPTTool Weight: 5.62 lbs (2.55 kg)Height: 10.88" (276 mm)Length: 10.25" (260 mm)Width: 4.5" (114 mm)

FastenerCapacity: 120 Gauge: 11 (.120") (3.0 mm)Range: ¾" – 1¾"Collation: Angular, flat wire wound coil

M00

__1¾

.120

M00

__1¾

.120

RoofPro™455XP Item #: 3D0101N

For fasteners see page 64 coil roofing nails

RoofPro™450 Item #: 3C0001N

Vinyl Siding Attachment for RoofPro™455XPConvert your RoofPro™455XP to a vinyl siding nailer. Order part # MA0013 and within minutes your ready to install siding.

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

15°

15°

LIMITEDWARRANTY

LIMITEDWARRANTY

ROOFINGROOFING

Page 12: Senco Product Catalog

When installing wood shakes go with our SCN49 Coil Nailer or the SNS Series of Staplers using our stainless steel nails or staples. Clay tiles can be laid faster without breakage with our SN952XP Nailers driving the HJ oversized head roof tile nail .

21

Tile Nail Range

20

Cedar Shakes: 2½" Coil Nailer

For stainless fasteners see page 69 Series N

Fastener:Stainless steel fasteners are recommended Shank Diameter: .082–.113

For fasteners see page 59 Series HJ

Clay Roof Tiles: 3½" Full Round Head Nailers

SCN49XP Item #: 5J0001NSpecifications: See page 23 for tool specifications

SN952XP Item #: 5A0001N

_17⁄8

_2½

.092, .113

EL,

GL

For stainless fasteners see page 63 Series GL. EL

Cedar Shakes: 7⁄16" Crown2" Heavy Wire Staplers

.120

HJ25

.120

HJ27

_2½

_3

N

_1¼

7⁄16

_2

Applications Clay Roof Tiles and framing, sheathing, truss building, sub-flooring and decks. Other applications include crate and box assembly, pallet making, furniture frame assembly and fencing.

Features• Well balanced and weight only 8.4 lbs.• Uses less air to drive nails – Highly efficient

internal design• Reduced jams and mis-feeds – Patented

TrueDrive™ magazine• Tool-Free Adjustable Depth-of-Drive• Easily fits between studs and joists• Retractable rafter hanger• Contact or sequential trigger actuation –

Patented drive selector

SpecificationsItem#: 5A0001N Selectable actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 7.9 scfmAir Inlet: 3/8" NPTTool Weight: 8.4 lbs (3.8 kg)Height: 13.57" (345 mm)Length: 20.3" (516 mm)Width: 4.75" (121 mm)

Tile FastenerDrives oversize head roof tile nails20˚ smooth shankShank Diameter: .120" HJ Tile Nail Range: 2½" – 3"

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

SNS41 SNS200XP-BST SNS200XP

LIMITEDWARRANTY

LIMITEDWARRANTY

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

15°

SNS SeriesSNS41, SNS200XP-BST, SNS200XPSpecifications See pages 30-31 for tool specifications

COIL NAIL COIL NAIL 1" CROWN STAPLE 1" BUTTON CAP 7/16" CROWN STAPLE COIL NAIL 7/16" CROWN STAPLE 20˚ FRH NAILER

APPLICATIONS RP455XP RP450 WC150RXP BC58 A11 SCN49XP SNS SERIES SN952XP

Composite Shingles ● ● ●

Wood Shakes ● ●

Clay Tile Shingles ●

Roofing Felt ● ● ● ● ●

Vapor Barriers ● ● ●

Insulation Board ● ● ● ● ●

Cement Board ● ● ● ● ●

FEATURES

Fastener Range ¾"-1¾" ¾"-1¾" ¾"-1½" 5⁄8", 1" Cap 3⁄8" 1¼"-2½" 1"- 2" 2½"-3"

Shank/Crown .120" .120" 16 ga. x 1" 1⁄2" Cr. 20 ga. x 7⁄16" .082"-.113" 17-16 ga. x 7⁄16" .120"

Fastener Capacity 120 120 160 110 168 250-375 140-160 64

Weight 5.4 lbs. 5.62 lbs. 5.5 lbs. 4.1 lbs. 2 lbs. 5.1 lbs. 8.4 lbs.

Height 10.5" 10.88" 9" 8.5" 1.75" 12" 13.57"

Length 10.25" 10.25" 15.25" 12.5" 12.3" 12.25" 20.3"

Depth-of-Drive ● ● ● ● ● ●

Jam EZ-Clear ● ● ● ● ● ●

Trigger Actuation* S, C S, C C C Sel. S, C Sel.

Exhaust Adjustable Adjustable Cap-fixed Adjustable Adjustable Adjustable Cap-fixed

Warranty 5 yrs 5 yrs 5 yrs 5 yrs 1 yr 5 yrs 5 yrs 5 yrs

Item # 3D0101N 3C0001N 4X0001N 4A0001N PC0700 5J0001N See Specs. 5A0001N

COMPARE APPLICATIONS & FEATURES

* Trigger Actuation: S: Sequential, C: Contact, Sel: Selectable

ROOFING

FastenerCapacity 160, Gauge: 16, Crown: 7⁄16"Range: 1¼" - 2" stainless steel staples

SPECIALTY ROOFING APPLICATIONS

See pages 30-31

for model dimensions

Page 13: Senco Product Catalog

23

SCN65XP Item #: 540101N , 540104N

.092.092

_2¼ _2¼

1¾1¾ 1¾

.082

SE EL

ED, E

J

SCN49XP Item #: 5J0001N

PalletPro™57FXP Item #: 4L0001N

2¼ _ 2¼

_1¼

_1¾

22

.082, .092 .113.099-.113

BE, B

L, BT

, GL* G

D

SE, E

L

.099.092

ED, E

J

_ 2¼

BK*

_ 23⁄8* _ 2½

2

* For soft woods only when driving 2½"Screw or Ring nails.

.099-.120 .113-.131

_ 3½

_ 3

_ 2 _ 2_ 2

.099-.120

_ 3¼

BJW

ood

to m

ason

ry

.099

_ 2¼

GD, H

D, K

D

BK, H

K

BL, B

T, GL

, HL

ApplicationsFor on-site, manufactured housing, including sheathing, decking, subflooring, and exterior decks. Also, industrial markets such as heavy-duty pallet construction, pallet repair, and crate and box assembly. Features• Light and fast for greater productivity• Adjustable Depth-of-Drive • High Load Capacity• Fast Cycle Time increases productivity• E-Z Load Design saves time

SpecificationsItem#: 520101N Contact actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 8.29 scfmAir Inlet: 3/8" NPTTool Weight: 7.5 lbs (3.4 kg)Height: 12.38" (314 mm)Length: 12.88" (327 mm)Width: 5.38" (137 mm)

FastenerCapacity: 250-275Shank Diameter: .099" - .113"Range: 2"– 2¾"Collation: Flat, 15˚ angled coil wire

_ 2½

_ 2 _ 2 _ 2

_ 23/8_ 2½

_ 2 7/8

.099 .099-.113 .113

BK

BL, B

T, GL GD HR

*

*Req

uires

a m

odi�

ed SC

N60X

P - sp

ecial

orde

r # XA

1739

.120

22

SCN60XP Item #: 520101N

15°

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

15°

2½" Coil Nailer

For fasteners see page 61-64 Series SE, BE, BL, BT, EL, GL, ED, EJ, BK, GD

Applications Siding, exterior decks, decking, exterior trim, fencing, subflooring, wood shingles, crate and box assembly and floor sheathing.

Features• Well balanced and lightweight• Selectable Trigger – you select mode of

operation• Dual Collation – Allows the choice between

wire or plastic collation• Adjustable Depth-of-Drive

SpecificationsItem#: 5J0001N Selectable actuation trigger Reg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cpm.): 3.9 scfmAir Inlet: 3/8" NPTTool Weight: 5.1 lbs (2.31 kg)Height: 12" (304 mm)Length: 12.25" (314 mm)Width: 5.19" (132 mm)

FastenerCapacity: 250-375 Shank: .082"-.113"Range: 1¼" –2½"Collation: 15˚ angular flat wire wound or plastic carrier strip

2¼" Coil Nailer

For fasteners see page 63 Series SE, EL, ED, EJ

Applications A lightweight and versatile tool for boxes and crates, carton-to-skid and pallets. Features• Aluminum Mainbody – weighs 5.9 lbs.• Adjustable Nail Canister accommodates wide

range of nails• High Capacity Nylon Magazine – fast and easy

loading• Body Protection – Side Steel Wear plates

reduce abrasion of tool• High Durability Driver and Piston Bumper for

long life

SpecificationsItem#: 4L0001N Contact actuation triggerReg. Operating Pressure: 70-120 psi (4.9-8.4 bar)Air Consumption (60 cycles per min.): 3.07 scfmAir Inlet: 3/8" NPTTool Weight: 5.9 lbs (2.67 kg)Height: 11.25" (286 mm)Length: 11.88" (302 mm)Width: 5.25" (133 mm)

FastenerCapacity: 300-350 Shank: .082"-.092"Range: 1" – 2¼"Collation: 15˚ angular, flat wire wound coil

COIL NAILERS

15°

15°ApplicationsFor on-site, manufactured housing, including framing, sheathing, decking, subflooring, and exterior decks. Also, industrial markets such as heavy-duty pallet construction, pallet repair, and crate and box assembly.

Features• Highest Power-to-Weight Ratio in its class• Light enough for one-handed operation• Adjustable Depth-of-Drive• Fast cycle time increases productivity• E-Z Load Design saves time

SpecificationsStandard Item#: 540101N Contact actuation trigger with flat safetyFramers Item#: 540104N Contact actuation trigger with toenail safetyReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 9.54 scfmAir Inlet: 3/8" NPTTool Weight: 8 lbs (3.6 kg)Height: 14.1" (359 mm)Length: 12.88" (327 mm)Width: 5.38" (137 mm)

FastenerCapacity: 225-275 Shank Diameter: .099" - .131"Range: 2"– 3½"Collation: Flat, 15˚ angled coil wire

For fasteners see page 61 & 62 Series BK, HK, BL, BT, GL, HL, BJ, GD, HD, KD

For fasteners see page 60 & 63 Series BK, BL, BT, GL, GD, HR*

3½" Coil Nailer

2¾" Coil Nailer

COIL NAILERS

SENCO has the right Coil Nailer for your application, be it framing and sheathing, decking, subflooring, wood to masonry, cement board, underlayment, pallets, packaging, crate and box assembly, siding or fencing. Available in XtremePro™, ProSeries™ and PalletPro™ with nail ranges from 1¼" - 51⁄8".

Page 14: Senco Product Catalog

COMPARE APPLICATIONS & FEATURES

2524

.099 -.131

3

.099 -.120.099 -.120

2¼2 3⁄8

GD, H

D, K

D

BK, H

K

BL, B

T, BE

, GL,

HL

_ 3¼

_ 3 _ 3 _ 3

_ 3¼

_ 3

HD

.120

KD MD

.131

HL

.120

HK

.120

_ 5

.148

PalletPro™100XP Item #: 5L0001NNote: A special order tool

PalletPro™130XP Item #: 5M0001NNote: A special order tool

LIMITEDWARRANTY

LIMITEDWARRANTY

APPLICATIONS SCN65XP SCN60XP SCN49XP PAL57FXP PAL100XP PAL130XP

Pallets ● ● ● ● ● ●

Packaging ● ● ● ● ● ●

Crates/Boxes ● ● ● ● ● ●

Carton to Skid ● ● ●

Framing/Sheathing ● ● ● ● ●

Subfloor/Decking ● ● ● ● ● ●

Underlayment ● ● ● ● ● ●

Cement Board ●

Siding ● ●

Fence Boards ● ●

Wood Shakes ●

FEATURES

Fastener Range 2"-3½" 2"-2¾" 1¼"-2½" 1" - 2¼" 2¼"-4" 3"-51⁄8"

Shank .099"-.131" .099"-.113" .082"-.113" .082"-.092" .099"-.148" .120"-.148"

Fastener Capacity 225-275 250-275 250-375 300-350 225-300 120-225

Weight 8 lbs 7.5 lbs 5.1 lbs 5.9 lbs 11.5 lbs 13 lbs

Height 14.1" 12.38" 12" 11.25" 16.5" 18"

Length 12.88" 12.88" 12.25" 11.88" 13.25" 13"

Depth-of-Drive ● ● ●

Jam EZ-Clear ● ● ● ● ● ●

Trigger Actuation* S, C C Sel. C C S, C

Exhaust Adj. Adj. Adj. Adj. Fixed Fixed

Warranty 5 yrs 5 yrs 5 yrs 5 yrs 5 yrs 5 yrs

Item # 520101N 5J0001N 4L0001N 5L0001N 5M0001N

* Trigger Actuation: S: Sequential, C: Contact, Sel: Selectable

540101N with Flat Safety540104N with Toenail Safty

4" Coil Nailer

For fasteners see page 61 & 62 Series BK, HK, BL, BT, BE, GL, HL, GD, HD, KD,

ApplicationsPallets, Truss Attachment, Heavy Duty Framing, Engineered Lumber, Docks and Commercial Application. Features• Includes Heavy Duty Threaded T-handle

for use when appropriate, or removal when not desired

• Flexible Collation Deflector and dust guard for improved safety in commercial environments

• Strengthened Driver and Bumper for extended use and reliable service

SpecificationsItem#: 5L0001N Contact actuation triggerReg. Operating Pressure: 70-120 psi (4.9-8.4 bar)Air Consumption (60 cycles per min.): 11.4 scfmAir Inlet: 3/8" NPTTool Weight: 11.5 lbs (5.24 kg)Height: 16.5" (418 mm)Length: 13.25" (338 mm)Width: 6" (153 mm)

FastenerCapacity: 225-300 Shank: .099"-.148"Range: 2¼" – 4" Collation: 15˚ angular, flat wire wound coil

5 1⁄8" Coil Nailer

For fasteners see page 61 & 62 Series HK, HL, HD, KD, MD

Applications Pallets, Truss Attachment, Heavy Duty Framing, Engineered Lumber, Docks and Commercial Application.

Features• Includes heavy duty threaded T-handle

for use when appropriate, or removal when not desired

• Flexible collation deflector and dust guard for improved safety in com-mercial environments

• Strengthened driver and bumper for extended use and reliable service

SpecificationsItem#: 5M0001N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 11.4 scfmAir Inlet: 3/8" NPTTool Weight: 13 lbs (5.9 kg)Height: 18" (57 mm)Length: 13" (330 mm)Width: 6.6" (168 mm)

FastenerCapacity: 120-225 Shank: .120"-148"Range: 3" – 51⁄8" Collation: 15˚ angular, flat wire wound coil

15°

15°

COIL NAILERSCOIL NAILERS

Page 15: Senco Product Catalog

27

For Fasteners see page 65 Series C

SFW09 Item #: 4C0001N

5⁄ 8

5⁄ 323 ⁄ 8

22 Gauge C

¼

L

1 9⁄16

3⁄8

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

3⁄16", 3⁄8", 7⁄16", 1⁄2" Crowns, 5⁄8" Fine Wire Staplers

For Fasteners see page 65-66 Series A, B, C, D, E, F, G, H

SFT10XP

E

DA3⁄ 16

3⁄ 16

3⁄ 16

5⁄ 8

5⁄ 8

5⁄ 8

5⁄ 8

3 ⁄ 8

7⁄ 163 ⁄ 8

3 ⁄ 8

22 Gauge

¼

¼ ¼

20 Gauge

B

½

½

C

G

¼3⁄ 8

¼

F

½

½

½

H

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA 16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

SFT10XP Long Nose

SFT10XP Double Length Magazine

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

¼" Crown, 15⁄8" Medium Wire Stapler

¼" Crown, 19⁄16" Medium Wire Stapler

For fasteners see page 67 Series L

For fasteners see page 67 Series L

ApplicationsCabinets, soffit, fascia, drawer assembly, picture frames, case backs, craft assembly.

Features• Magnesium Mainbody - durable & ultra-light• Metal Cylinder for increased durability• Oil-Free Design• Adjustable Depth-of-Drive• Selective Actuation Trigger• Rotatable Rear Exhaust and Belt Hook• Swivel Air Plug• Over-Mold Rubber Comfort Grip• Includes Case and Wrench

ApplicationsCabinets, soffit, fascia, drawer assembly, picture frames, case backs, craft assembly.

Features• Magnesium mainbody provides a durable and

ultra light tool for comfortable extended use.• Oil free motor eliminates oil onto work surface• Selectable trigger controls the fastening method• Rotatable rear exhaust and belt hook • Comfort rubber grip and reload indicator will

keep you working comfortably and efficiently• Nose Mounted LED Light - Illuminated work

surface• Includes case and wrench.

SpecificationsItem #: 1W0021N Selectable actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 2.4 scfm Air Inlet: 1/4" NPTTool Weight: 2.6 lbs (1.8 kg)Height: 9.5" (241 mm)Length: 10.25" (260 mm)Width: 2.5" (63.5 mm)

FastenerCapacity: 110 Gauge: 18Range: 1⁄2" - 15⁄8"Crown: ¼"Collation: Straight glued and taped strip

SpecificationsItem #: 8C0001N Selectable actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 2.4 scfm Air Inlet: 1/4" NPTTool Weight: 2.6 lbs (1.8 kg)Height: 9.5" (241 mm)Length: 10.25" (260 mm)Width: 2.5" (63.5 mm)

FastenerCapacity: 110 Gauge: 18Range: 3⁄8" - 19⁄16"Crown: ¼"Collation: Straight glued and taped strip

SLS18Mg Item #: 1W0021N

NEW SLS150Mg Item #: 8C0001N

3⁄8" Crown, 5⁄8" Fine Wire StaplerApplicationsUpholstering operations, furniture assembly, cabinets, automotive vinyl roofs and interior trim, bedding manufacture, TV and stereo grill cloth, picture frames, shoe making, molding, house wrap, and roofing felt. Features• Full 1" lip length - makes getting into tight spots

easier• Rounded Steel Cap - won't snag fabric• Rear Exhaust - keeps oil off fabric• Rear Magazine Bumper - protects fabric• Comfort Grip - reduces fatigue

SpecificationsItem#: 4C0001NReg. Operating Pressure: 60-95 psi (4.1-6.5 bar)Air Consumption (60 cycles per min.): .77 scfmAir Inlet: 1/4" NPTTool Weight: 2.1 lbs (0.95 kg)Height: 6" (152 mm)Length: 9.25" (235 mm)

Fastener Capacity: 110-168 Gauge: 22Range: 5/32" - 5/8"Crown: 3/8"Collation: Straight glued strip

¼

L

1 5⁄8

1⁄2

LIMITEDWARRANTY

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

SENCO has three categories of staplers; Fine, Medium and Heavy Wire. For upholstery, felt insulation, shoe making, dust cover, roof shingles and felt, spring attachments, insulating sheathing, underlayment, hardwood floors, drawers, sheathing, siding, wood shakes, manufactured housing, packaging, furniture frames, subflooring, pallets and box assembly.Available with staples from 22 -15 Gauge.

ApplicationsUpholstery, furniture assembly, cabinets, bedding, picture frames, molding, roof felt, house wrap, RV construction.

Features• Heavy-Duty Steel Cap – minimal recoil• Rear Exhaust – keeps oil off fabric • Short Trigger Stroke–quick precise operation• Compact Tool Design• One-Handed Magazine opening for fast reloads• Optional Automatic Fire – up to 30 drives/second• Optional Double Length Magazines

SpecificationsItem#: See belowReg. Operating Pressure: 60-95 psi (4.1-6.5 bar)Air Consumption (60 cycles per min.): .77 scfmAir Inlet: 1/4" NPTTool Weight: 2.1 lbs (0.955 kg)Height: 6.57" (167 mm)Length: 8.58" (42 mm)Fastener capacity: 110-192Double Length Magazine: 230-310

FastenerGauges: 22 – 20Range: 5/32" - 5/8"Crowns: 3/16", 3/8", 7/16", 1/2"Collation: Straight glued strip

SFT10XP models and item numbers

Item Code Description Crown Ga. UPCA/D Wire 6S0001N SFT10XP A/D-wire stapler 3/16" 22 741474123832 6S0101N SFT10XP A/D-wire auto stapler 3/16" 22 741474124419B Wire 6S0011N SFT10XP B-wire stapler 1/2" 22 741474124433 6S0211N SFT10XP B-wire D/L stapler 1/2" 22 741474124471 6S0311N SFT10XP B-wire auto D/L stapler 1/2" 22 741474124495C Wire 6S0021N SFT10XP C-wire stapler 3/8" 22 741474123856 6S0121N SFT10XP C-wire auto stapler 3/8" 22 741474124518 6S0221N SFT10XP C-wire D/L stapler 3/8" 22 741474124532 6S0321N SFT10XP C-wire auto D/L stapler 3/8" 22 741474124556 6S0421N SFT10XP C-wire long nose stapler 3/8" 22 741474124570E Wire 6S0031N SFT10XP E-wire stapler 3/16" 20 741474124594F Wire 6S0041N SFT10XP F-wire stapler 1/2" 20 741474124617 6S0341N SFT10XP F-wire auto D/L stapler 1/2" 20 741474124655G Wire 6S0051N SFT10XP G-wire stapler 3/8" 20 741474124679 6S0251N SFT10XP G-wire D/L stapler 3/8" 20 741474124693 6S0351N SFT10XP G-wire auto D/L stapler 3/8" 20 741474124716H Wire 6S0361N SFT10XP H-wire auto D/L stapler 7/16" 20 741474124730

26

FINE/MEDIUM WIRE STAPLERSFINE WIRE STAPLERS

Page 16: Senco Product Catalog

29

L

¼

3 ⁄8 3 ⁄8

3 ⁄8

M

¼ 3⁄8 7⁄16

NL M

¾

1½–

– ¾– ¾–

1½–

18 Gauge 16 Gauge

28

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA 16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

COMPARE APPLICATIONS & FEATURES: FINE/MEDIUM WIRE STAPLERS

APPLICATIONS SFT10XP SFW09 SLS18Mg SLS150XP SLS20XP SLS25XP SKSXPUpholstery ● ● Shoe making ● ● Casebacks ● ● ● ● ● ● ●

Trim & molding ● ● ● ● ● ● Cabinets & drawers ● ● ● Picture frames ● ● ● ● ● Furniture frames ● ● ●

Underlayment ● ● ●

Fascia & soffits ● ● ● ● ●

Felt insulation ● ● Window & door units ● ● ● ● ●

Siding ● ● ● Fencing ● ● ● ● ●

Lathing ● Packaging ● ● ●

FEATURESFastener Range 5⁄32"- 5⁄8" 5⁄32"- 5⁄8" 1⁄2"- 19⁄16" 3⁄8"- 15⁄8" 3⁄8"- 1½" 3⁄8"- 1½" ¾"- 1½"Crown 3⁄16"–½" 3⁄8" ¼" ¼" 3⁄16", ¼", 3⁄8" ¼", 3⁄8" ¼", 3⁄8", 7⁄16"Gauge 22-20 22 18 18 19,18 18 18-16Fastener Capacity 110-310 110-168 110 110 168 168 1450Weight 2.1 lbs 2.1 lbs 2.6 lbs 2.6 lbs 2.5 lbs 2.67 lbs 4.2 lbsHeight 6.57" 6" 9.5" 9.5" 8.5" 9" 9.25"Length 8.58" 9.25" 10.25" 10.25" 12" 12" 12.38"Belt Hook ● ● Depth of Drive ● ● ● ● Jam EZ Clear ● ● ● ● ● ● ●

Trigger Actuation* S, Auto D Sel. Sel. S, C, Sen. S, C CNever Never-Lube/No-oil Design ● ● ● ● ●

Exhaust Rear Rear Rear Adj. Rear Adj. Cap fixed Cap fixed Cap fixedWarranty 5 yrs 5 yrs 5 yrs 5 yrs 5 yrs 5 yrs 5 yrsItem # 4C0001N 1W0021N 8C0001N

* Trigger Actuation: S: Sequential, C: Contact, D: Dual Triggers, Sel: Selectable, Sen: Sencomatic

Staple Item # Description Crown Ga.L Wire 820103N SLS25XP-L-wire stapler 1/4” 18M Wire 820107N SLS25XP-M-wire stapler 3/8” 18

ApplicationsDrawers, casebacks, cabinet frame assembly, underlayment sheathing, paneling, molding/trim, soffits, pre finished gypsum and siding for on-site and manufactured housing.

Features• Ultra-Light (2.67 lbs.) for ease of handling• Ergonomically Designed with comfort-grip• Adjustable Depth-of-Drive• No-Mar Pad• Never-Lube® Design means easier maintenance and no lubrication to stain fine wood• Heavy Duty Components, including an aluminum

sleeve and piston, rugged durability even in high volume production environments

SpecificationsItem #: SLS25XP-L: 820103N SLS25XP-M: 820107N Contact actuation trigger(Is available with Sequential actuation trigger)Reg. Operating Pressure: 75-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 1.92 scfmAir Inlet: 1/4" NPTTool Weight: 2.67 lbs (1.21 kg)Height: 9" (229 mm)Length: 12" (305 mm)Width: 2" (51 mm)

FastenerCapacity: 168 Gauge: 18Range: 3⁄8" - 1½"Crowns: ¼", 3⁄8"Collation: Straight glued strip

¼", 3⁄₈" Crowns, 1½" Medium Wire Staplers

For fasteners see page 67-68 Series L, M

SLS25XP Item #: see specifications

For fasteners see page 67-69 Series L, N, M

ApplicationsDrawer assembly, cabinets, corner and glue block fastening, and spring clip attachment in furniture assembly, doors and window casings, trim, and moldings. On-site construction uses for aluminum and vinyl siding, underlayment, and attachment of roofing sheathing and decking materials.

Features• E-Z Load, EZ-Clear™ System • Quiet operation• Long 1" Lip to get into tight spots• Never-Lube® Design means easier maintenance and no lubrication to stain fine wood

SpecificationsItem #: SKSXP-L: 300120N SKSXP-M: 300152N SKSXP-N: 300184NReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 2.16 scfmAir Inlet: 1/4" NPTTool Weight: 4.2 lbs (1.9 kg)Height: 9.25" (238 mm)Length: 12.38" (314 mm)

FastenerCapacity: 145Gauge: 18, 16 Range: ¾" - 1½"Crowns: ¼", 3⁄8", 7⁄16"Collation: Straight glued strip

¼", 3⁄8", 7⁄16" Crowns, 1½" Medium-Heavy Wire Stapler

SKSXP Item #: see specifications

LIMITEDWARRANTY

Applications,Furniture manufacturing, cabinet frame assembly, underlayment sheathing, paneling, molding/trim, soffits, pre-finished gypsum, and siding for on-site and manufactured housing, upholstery.

Features• Ultra-Light (2.5 lbs.) for ease of handling• Ergonomically Designed with Comfort-Grip• Adjustable Depth-of-Drive• No-Mar Pad• Never-Lube® Design means easier maintenance and no lubrication to stain fine wood• Heavy Duty Components, including an aluminum sleeve and piston, rugged durability even in high volume production environments

SpecificationsItem #: SLS20XP-K: 490101N SLS20XP-L: 490103N SLS20XP-L W/Case: 490105N SLS20XP-L Sencomatic:490015N SLS20XP-M Sencomatic: 490009N SLS20XP-M: 490107N SLS20XP-R: 490111N Sequential actuation triggersReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 1.92 scfmAir Inlet: 1/4" NPTTool Weight: 2.5 lbs (1.13 kg)Height: 8.5" (216 mm)Length: 12" (305 mm)

FastenerCapacity: 168 Gauge: 19, 18Range: 3⁄8" - 1½"Crowns: 3⁄16", ¼", 3⁄8" Collation: Straight glued strip

3⁄16", ¼", 3∕8" Crowns, 1½" Fine & Medium Wire Staplers

For fasteners see page 67-68 Series K, R, M, LSLS20XP Item #: see specifications

KR

¼

¼

L

3⁄8

3⁄16

1 1

M

1½1½

3⁄8

1⁄ 21⁄ 2

3⁄ 8

19 Gauge

18 Gauge

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA 16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

Staple Item # Description Crown Ga.A/D Wire 6S0001N SFT10XP A/D-wire stapler 3/16” 22 6S0101N SFT10XP A/D-wire auto stapler 3/16” 22B Wire 6S0011N SFT10XP B-wire stapler 1/2” 22 6S0211N SFT10XP B-wire D/L stapler 1/2” 22 6S0311N SFT10XP B-wire auto D/L stapler 1/2” 22C Wire 6S0021N SFT10XP C-wire stapler 3/8” 22 6S0121N SFT10XP C-wire auto stapler 3/8” 22 6S0221N SFT10XP C-wire D/L stapler 3/8” 22 6S0321N SFT10XP C-wire auto D/L stapler 3/8” 22 6S0421N SFT10XP C-wire long nose stapler 3/8” 22E Wire 6S0031N SFT10XP E-wire stapler 3/16” 20F Wire 6S0041N SFT10XP F-wire stapler 1/2” 20 6S0341N SFT10XP F-wire auto D/L stapler 1/2” 20G Wire 6S0051N SFT10XP G-wire stapler 3/8” 20 6S0251N SFT10XP G-wire D/L stapler 3/8” 20 6S0351N SFT10XP G-wire auto D/L stapler 3/8” 20H Wire 6S0361N SFT10XP H-wire auto D/L stapler 7/16” 20

Staple Item # Description Crown Ga.K Wire 490101N SLS20XP-K-wire stapler 1/4” 19L Wire 490103N SLS20XP-L-wire stapler 1/4” 18 490105N SLS20XP-L-wire stapler, with case 1/4” 18 490015N SLS20XP-L-wire stapler, Sencomatic 1/4” 18M Wire 490107N SLS20XP-M-wire stapler 3/8” 18 490009N SLS20XP-M-wire stapler, Sencomatic 3/8” 18R Wire 490111N SLS20XP-R-wire stapler 3/16” 19

Staple Item # Description Crown Ga.L Wire 300120N SKSXP-L-wire stapler 1/4” 18M Wire 300152N SKSXP-M-wire stapler 3/8” 18N Wire 300184N SKSXP-N-wire stapler 7/16” 16

MEDIUM/HEAVY WIRE STAPLERS

Page 17: Senco Product Catalog

2

N

1

7⁄16

2

1

7⁄16

O

16 Gauge 17 Gauge

Q

7⁄16

ApplicationsSheathing, furniture framing, roof decking, subflooring, crate and box assembly, pallets, cedar shingles, furring, metal tie-down straps, fascia and soffits, ridge beam assembly. Features• 20% more powerful than the standard SNS200XP

for the most demanding applications• Innovative magazine removal mechanism

maintains a clean, narrow line of sight for precise staple placement

• Well-balanced, ergonomic design for all-day use• 1” lip length allows access into tight corners• Durable all-metal magazine construction• Precision-machined drive track ensures accurate,

jam-free staple drives• Adjustable Depth-of-Drive and Belt Hook

31

2

N

1

7⁄16

2

1

7⁄16

O

16 Gauge 17 Gauge 16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

30

¾

P

1

LIMITEDWARRANTY

2

N

1

7⁄16

1 3⁄4

O

7⁄16

16 Gauge 17 Gauge

For fasteners see page 70 Series P

1" Wide Crown, 2" Heavy Wire StaplerSpecificationsItem #: 4Y0001N Contact actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 3.45 scfmAir Inlet: 3/8" NPTTool Weight: 5.3 lbs (2.4 kg)Height: 10" (254 mm)Length: 15.25" (387 mm)Width: 3.5" (89 mm)

FastenerCapacity: 160 Gauge: 16 Range: 7⁄8" - 2"Crown: 1"Collation: Straight glued strip

ApplicationsWire lathing, structural insulated sheathing, corrugated carton to skid, furniture/cabinet frames, and butt-joints. Also capable of handling asphalt roof shingles and attaching foam insulation board.

Features• Lightweight 5.3 pounds• Robust Firing Valve Design makes the tool fast,

powerful, efficient and easy to maintain• Positive-Locking Adjustable Depth-of-Drive ensures

consistently flush drives • EZ-Clear™ Latch virtually eliminates downtime

caused by fastener jams.• High-Strength Composite Magazine and Metal

Magazine Guide prevents wear• Large 3/8” Inlet for increased air flow during high

volume usage• Durable Deflector Cap for superior impact resistance

WC200XP Item #: 4Y0001N

7⁄8

2

P

1

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA 16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

7⁄16" Crown, 2½" Heavy Wire Stapler

For fasteners see page 68-69 Series O, N

7⁄16" Crown, Heavy Wire StaplerSpecificationsItem #: 7C0001NContact actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 5.52 scfmAir Inlet: 3/8" NPTTool Weight: 5.9 lbs (2.67 kg)Height: 11" (279 mm)Length: 14" (279 mm)Width: 4.0" (102 mm)

FastenerCapacity: 160 Gauge: 17 (O-wire), 16 (N-wire) Range: 1" - 2"Crown: 7⁄16"Collation: Straight glued strip

SNS200XP-BST Item #: 7C0001N

For fasteners see page 70 Series Q

ApplicationsFraming, decking, furniture frames, furring, sidewall sheathing, subflooring, window units, crate and box assembly, boxes, crates, pallets and pallet repair. Features• Rugged Dependability• Fast - up to 15 staples per second• Adjustable Depth-of-Drive• All the features you want, including adjustable

power for softer drives• EZ-Clear™ latch • Adjustable exhaust

SpecificationsItem #: 660101NContact actuation triggerReg. Operating Pressure: 80-120 psi (5.5-8.3 bar)Air Consumption (60 cycles per min.): 6.54 scfmAir Inlet: 3/8" NPTTool Weight: 5.9 lbs (2.7 kg)Height: 12" (305 mm)Length: 14.38" (365 mm)Width: 3.6" (92 mm)

FastenerCapacity: 130 Gauge: 15 Range: 1¼" - 2½"Crown: 7⁄16"Collation: Straight glued strip

SQS55XP Item #: 660101N

7⁄16" Crown, Heavy Wire Stapler

For fasteners see page 68-69 Series O, N

ApplicationsSheathing, furniture framing, roof decking, subflooring, boxes and crate assembly, cedar shingles, furring, metal tie-down straps, fascia and soffits, ridge beam assembly, pallets and pallet repair. Features• 15% more powerful than all other construction

staplers in its class• Innovative magazine removal mechanism

maintains a clean, narrow line of sight for precise staple placement

• Well-balanced, ergonomic design for all-day use• 1” lip length allows access into tight corners• Durable all-metal magazine construction• Precision-machined drive track ensures

accurate, jam-free staple drives• Adjustable Depth-of-Drive and Belt Hook

SpecificationsItem #: 7B0001NContact actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 6.3 scfmAir Inlet: 3/8" NPTTool Weight: 5.3 lbs (2.4 kg)Height: 11" (279 mm)Length: 15" (381 mm)Width: 3.5" (89 mm)

FastenerCapacity: 160 Gauge: 17 (O-wire), 16 (N-wire) Range: 1" - 2"Crown: 7⁄16"Collation: Straight glued strip

SNS200XP Item #: 7B0001N Scan to learn about SNS200XP &

SNS200XP_BST

For fasteners see page 70 Series P

1" Wide Crown, 1½" Heavy Wire StaplerSpecificationsItem #: 4W0001N Contact actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 3.18 scfmAir Inlet: 3/8" NPTTool Weight: 5 lbs (2.3 kg)Height: 9" (229 mm)Length: 15.25" (387 mm)Width: 3.5" (89 mm)

FastenerCapacity: 160 Gauge: 16 Range: 3⁄4" - 1½"Short Staples – Order block-out kit YK0786 to drive staples under ¾”Crown: 1"Collation: Straight glued strip

ApplicationsWire lathing, structural insulated sheathing, corrugated carton to skid, butt-joints and furniture/cabinet frames and attaching foam insulation board. Features• Lightweight 5.0 pounds• Robust Firing Valve Design makes the tool fast,

powerful, efficient and easy to maintain• Positive-Locking Adjustable Depth-of-Drive ensures

consistently flush drives • EZ-Clear™ Latch virtually eliminates downtime

caused by fastener jams.• High-Strength Composite Magazine and Metal

Magazine Guide prevents wear• Large 3/8” Inlet for increased air flow during high

volume usage• Durable Deflector Cap for superior impact resistance

WC150XP Item #: 4W0001N

7⁄16" Crown, 2" Heavy Wire Stapler

For fasteners see page 68-69 Series O, N

ApplicationsSheathing, sub-flooring, fascia and soffits, aluminum and vinyl siding, cedar shingles, furring, ridge beam assembly, and metal tie down straps, crate-box assembly and light furniture framing. Features• Durable Construction, minimizes downtime and

operating costs• Adjustable Depth-of-Drive• EZ-Clear™ Latch• Comfort Grip Handle

SpecificationsItem #: 3L0003N Contact actuation triggerReg. Operating Pressure: 80-120 psi (5.5-8.3 bar)Air Consumption (60 cycles per min.): 5.4 scfmAir Inlet: 3/8" NPTTool Weight: 4.6 lbs (2.1 kg)Height: 10.75" (273 mm)Length: 15" (381 mm)

FastenerCapacity: 160 Gauge: 17, 16Range: 1" - 2"Crown: 7⁄16"Collation: Straight glued strip

SNS41 Item #: 3L0003N

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

HEAVY WIRE STAPLERSHEAVY WIRE STAPLERS

Page 18: Senco Product Catalog

33

Magnetic nosepiece for attaching 1-1/4" galvanized metal washers (must be purchased separately)See Specialty Fasteners p.72 SCP40XP Item #: 7J0001N

ApplicationsDesigned for fastening of drywall track, wood furring, hat channel,ceiling grid to concrete, concrete block and steel, wire lath to block/concrete*.

Features• 10 Times faster than powder-actuated systems• No Licensing required to operate• Operates in Contact or Sequential Trigger

actuation modes• Contact or sequential actuation trigger - patented

drive selector• Works with conventual air compressors, hoses,

and fittings• Operates in extreme temperature and altitudes

SpecificationsItem #: 7J0001N Contact or Sequential actuation triggersReg. Operating Pressure: 80-120 psi (5.5-8.3 bar)Air Consumption (60 cycles per min.): 5.2 scfmAir Inlet: 1/4" NPTTool Weight: 7.1 lbs (3.2 kg)Height: 12.22" (310 mm)Length: 18.2" (462 mm)Width: 4.5" (114.4 mm)

Concrete and Steel FastenerCapacity: 42 Smooth Shank Diameter: .109" Step Shank Diameter: .104"- .118"Head Diameter: .250"Range: ½"- 1½" Shank Style: Smooth/StepFinish: Zinc plated and black oxideCollation: Standard washer style

1½" Standard Pressure Pneumatic Concrete and Steel Pinner

For Fasteners see page 71 Concrete and Steel Collated Pins

½

.109/.118

W3

Y

9⁄16

7⁄16

5⁄16

32

X

__½

__¼

1

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

ApplicationsDesigned to do a wide range of wood fastening applications such as butt joints, cabinets, caskets, curios, mirror and picture frames better, faster and cheaper.

Features• Senclamp Fasteners pull the joint together

during driving for a tight, permanent fit• Eliminate milling, doweling, clamping,

screwing and other time-consuming, cost adding operations

• The Senclamp High-Carbon Steel Fastener derives added strength from its special webbed design

SpecificationsItem #: 220101N Sequential actuation triggersItem #: 4E0002N Cycle-thru restricted triggerReg. Operating Pressure: 80-110 psi (5.5-7.5 bar)Air Consumption (60 cycles per min.): 3.8 scfmAir Inlet: 3/8" NPTTool Weight: 6.3 lbs (2.8 kg)Height: 9.8" (249 mm)Length: 12.7" (322 mm)

FastenerCapacity: 120 Gauge: 25Range: 5⁄16"- 9⁄16" Crown: 7⁄16"Collation: Straight glued strip

7⁄16" Crown, 9⁄16" Senclamp® Fastener

For Fasteners see page 71 Series Y

SC1XP Senclamp® Item #: 220101N

COMPARE APPLICATIONS & FEATURES: MEDIUM/HEAVY WIRE STAPLERS

APPLICATIONS SKSXP WC150XP WC200XP SNS41 SNS200XP SNS200XP-BST SQS55XPCabinets & drawers ● ● ● ● ● ● ●

Furniture frames ● ● ● ● ● ● ●

Underlayment ● ● ● ● ● ● ●

Decking ● ● ● ● ● ● ●

Structural Insulated Sheathing, ● ●

Insulative sheathing ● ● Window & door units ● ● ● ● ●

Siding ● ● ● ● ● Fencing ● ● ● ● ●

Wood Shakes ● ● ● ● ● ●

Framing & sheathing ● ● ● ●

Lathing ● ● Packaging ● ● ● ● ● ● ●

Pallets ● ● ● ● ●

FEATURESFastener Range ¾"- 1½" *3⁄4"- 1½" 7⁄8"- 2" 1"- 2" 1"- 2" 1"- 2" 1¼"- 2½"Crown ¼", 3⁄8", 7⁄16" 1" 1" 7⁄16" 7⁄16" 7⁄16" 7⁄16"Gauge 18-16 16 16 17-16 17-16 17-16 15Fastener Capacity 145 160 160 160 160 160 130Weight 4.2" 5 lbs 5.3 lbs 4.6 lbs 5.3 lbs 5.9 lbs 5.9 lbsHeight 9.25" 9" 10" 10.75" 11" 11" 12"Length 12.38" 15.25" 15.25" 15" 15" 15" 14.38"Belt Hook ● ● ● ● ● Depth of Drive ● ● ● ● ● ●

Jam EZ Clear ● ● ● ● ● ● ●

Trigger Actuation* C C C C C C CNever Never-Lube/No-oil Design ●

Exhaust Cap fixed Cap fixed Cap fixed Adjustable Cap fixed Cap fixed AdjustableWarranty 5 yrs 5 yrs 5 yrs 5 yrs 5 yrs 5 yrs 5 yrs

Item # 4W0001N 4Y0001N 3L0003N 7B0001N 7C0001N 660101N

* Trigger Actuation: S: Sequential, C: Contact, D: Dual Triggers, Sel: Selectable, Sen: Sencomatic

**WC150XP Short Staples – Order block-out kit YK0786 to drive staples under ¾”

Staple Item # Description Crown Ga.L Wire 300120N SKSXP-L-wire stapler 1/4” 18M Wire 300152N SKSXP-M-wire stapler 3/8” 18N Wire 300184N SKSXP-N-wire stapler 7/16” 16

SC2 Sencor® Item #: 470001N

1" Crown, ½" Corrugated Fastener

Applications Designed to do butt joints, cabinets, caskets, curios, mirror and picture frames, pallets and pallet repair, trusses, crate and box assembly better, faster and cheaper.

Features• Added Strength for larger butt joints• Powerful for hard and dense material• Eliminate gluing, milling, doweling, screwing

and clamping• Sencor® Corrugated Fasteners provide twice

the joint strength of ordinary fasteners

SpecificationsItem #: 470001N Sequential actuation triggerReg. Operating Pressure: 80-110 psi (5.5-7.5 bar)Air Consumption (60 cycles per min.): 3.7 scfmAir Inlet: 3/8" NPTTool Weight: 6.9 lbs (3.1 kg)Height: 9.44" (240 mm)Length: 12.5" (318 mm)Fastener Capacity: 80

FastenerGauge: 25Range: ¼" - ½" Crown: 1"Collation: Straight glued strip

For fasteners see page 71 Series X

SPECIALTY TOOLS

Page 19: Senco Product Catalog

3534

SLS20XP-HF Item #: 490021N

__1

R

_5⁄8

3⁄16

15.5GA

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

F

5⁄16

½

½

NEW DFPXP Clinch Tool Item #: 8H0001N

For fasteners see p. 66 Series F

20 Ga. ½" Crown, ½" Staple Clinch Tool

ApplicationsUsed wherever two materials must be stapled and clinched together. Corrugated box fabrication, light assembly and packaging, shoe making.

Features• High capacity magazine holds 230 staples –

less reloading means maximum production• Tool-free adjustable anvil opening• Rubber comfort grip reduces vibration, slip-

ping, and fatigue• Bottom-load magazine for quick reloading• 6.9” throat allows for extended reach into

cartons• 5 year limited warranty

SpecificationsItem #: 8H0001N Sequential actuation triggerReg. Operating Pressure: 65-100 psi (4-7 bar)Air Inlet: 1/4" NPTTool Weight: 4.9 lbs (2.24 kg)Height: 12.9" (327 mm)Length: 14.9" (380 mm)Throat Depth : 6.9" (175 mm)

FastenerCapacity: 230 Gauge: 20Range: 5⁄16"- 5⁄8" Crown: ½"Collation: Glued strip

7⁄16

5⁄16

5⁄8

J

7⁄16

5⁄16

5⁄8

J

7⁄16" Crown, 5⁄ 8" Staple Clinch Tool Sisal Anvil

7⁄16" Crown, 5⁄ 8" Staple Clinch Tool

ApplicationsCorrugated box fabrication, stapling bedding, light assembly and packaging, shoe making, recessed-end packaging, pre-assembled setup, boxes and displays

Features• High capacity magazine holds 152 staples –

less reloading means maximum production• Tool-free adjustable anvil opening• Rubber comfort grip reduces vibration, slip-

ping, and fatigue• Bottom-load magazine for quick reloading• 5 year limited warranty

ApplicationsCorrugated box fabrication, stapling bedding, light assembly and packaging, shoe making, recessed-end packaging, pre-assembled setup, boxes and displays

Features• High capacity magazine holds 152 staples –

less reloading means maximum production• Tool-free adjustable anvil opening• Rubber comfort grip reduces vibration, slip-

ping, and fatigue• Bottom-load magazine for quick reloading• 6.9” throat allows for extended reach into

cartons• 5 year limited warranty

SpecificationsItem #: F75SXP Sisal Anvil: 8J0001N Sequential actuation trigger Reg. Operating Pressure: 65-100 psi (4-7 bar)Air Inlet: 1/4" NPTTool Weight: 4.9 (2.24 kg)Height: 12.9" (327 mm)Length: 14.9" (380 mm)Width: 3” (75 mm)Jaw Openings: .5" or .81"Throat Depth F75SXP: 1¾", FastenerCapacity: 152 Gauge: 18, Range: 5⁄16"- 5⁄8"Crown: 7⁄16"Collation: Glued strip

SpecificationsItem #: F75LXP Long Reach Anvil: 8J0002N Sequential actuation trigger Reg. Operating Pressure: 65-100 psi (4-7 bar)Air Inlet: 1/4" NPTTool Weight: 4.9 (2.24 kg)Height: 12.9" (327 mm)Length: 14.9" (380 mm)Width: 3” (75 mm)Jaw Openings: .5" or .81"Throat Depth F75LXP: 6.9"FastenerCapacity: 152 Gauge: 18, Range: 5⁄16"- 5⁄8"Crown: 7⁄16"Collation: Glued strip

For fasteners see p. 66 Series J

For fasteners see p. 66 Series J

NEW F75SXP Sisal Anvil Item #: 8J0001N

NEW F75LXP Clinch Tool Item #: 8J0002N

LIMITEDWARRANTY

LIMITEDWARRANTY

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

3⁄16" Crown, 1" Hardwood & Laminate Floor StaplerApplications For 1/4", 5/16", and 3/8" thick solid hardwood and hardwood laminate floors.

Features• Front block easily adjusts to floor thickness • Industry-exclusive safety controls staple place-

ment• Power adjusted motor drives staples to

consistent and controllable depth• Soft rubber palm pad for comfortable grip• Weighs just 2.15 lbs.• Never-Lube® design

SpecificationsItem #: 490021N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Inlet: 1/4" NPTTool Weight: 3.2 lbs (1.5 kg)Height: 9" (228 mm)Length: 13" (332 mm)Width: 3" (76 mm)

FastenerCapacity: 168 Gauge: 19Range: 5⁄8"– 1" Crown: 3⁄16"Collation: Straight glued strip

For Fasteners see page 67 & 71 Series R

2" Pneumatic Mallet Actuated Hardwood Flooring Cleat Nailer

2" Pneumatic Mallet Actuated Hardwood Flooring Stapler

ApplicationsFor the installation of 1/2"-3/4" (12 -19 mm) hardwood and hardwood laminate flooring

Features• Easy on the arm, it's pneumatic action requires

a single strike to drive fastener.• Innovative non-marring base that adjust

between ½” and ¾” flooring without the use of tools.

• Lightweight and well-balanced, yet 5% more powerful than competitive flooring nailers

• Safety trigger prevents accidental ejection of fasteners

• Extra-long ergonomic handle reduces the amount the operator has to bend over

• Included mallet, oil, wrenches, 1/4" air fitting

ApplicationsUses 1" - 2" 15.5 gauge, 1/2" crown staplesfor the installation of 1/2"-3/4" (12 -19 mm) hardwood and hardwood laminate flooring

Features• Easy on the arm, it's pneumatic action requires

a single strike to drive fastener.• Innovative non-marring base that adjust

between ½” and ¾” flooring without the use of tools.

• Lightweight and well-balanced, yet 5% more powerful than competitive flooring nailers

• Safety trigger prevents accidental ejection of fasteners

• Extra-long ergonomic handle reduces the amount the operator has to bend over

• Included mallet, oil, wrenches, 1/4" air fitting

SpecificationsItem #: 8D0001NReg. Operating Pressure: 90-110 psi (6.2-7.6 bar)Air Inlet: 1/4" NPTTool Weight: 10.1 lbs (4.58 kg)Height: 21.5" (546 mm)Length: 17.8" (452 mm)Width: 3.1" (78 mm)

FastenerCapacity: 107 Range: 1½"– 2" Collation: Mylar taped strip L type cleat nails

SpecificationsItem #: 8D0002NReg. Operating Pressure: 90-110 psi (6.2-7.6 bar)Air Inlet: 1/4" NPTTool Weight: 11.1 lbs (5.0 kg)Height: 21.5" (546 mm)Length: 17.8" (452 mm)Width: 3.1" (78 mm)

FastenerCapacity: 102 Range: 1"– 2" Collation: Glude strip

NEW SHF200 Item #: 8D0001N

NEW SHFS200 Item #: 8D0002N

For fasteners see page 71 Series RW

For fasteners see page 71 Series FL

RW

.063

_1½

_2

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

Scan to learn about SHF200

LIMITEDWARRANTY

FL

1⁄2

2

SPECIALTY TOOLSSPECIALTY TOOLS

Page 20: Senco Product Catalog

3736

_5⁄8

AX.0468

__2

LIMITEDWARRANTY

LIMITEDWARRANTY

Applications: Everything to get you started on the job is included in this one kit. Perfect for interior trim, cabinets, chair rail, crown molding, baseboards, book shelves and exterior trim.

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

PC1010NOIL-FREE0.7 scfm @ 90psi135 max psi0.5 hp1 gallon

PC1280 PC0968N PC0969 PC0970OIL-FREE2.8 scfm @ 90psi150 max psi1.5 hp6 gallon

OIL-FREE4.9 scfm @ 90psi200 max psi1.75 hp4.5 gallon

OIL-FREE4.9 scfm @ 90psi200 max psi1.75 hp4.5 gallon

OIL-FREE4.9 scfm @ 90psi200 max psi1.75 hp15 gallon

INTRODUCING OUR NEWCOMPRESSORS

MAKING HARD WORK EASIER

With all of the reliability and innovation that you’ve come to expect from

www.senco.com

200 PSI• More stored energy• Longer air tool run time• Efficiently maintains tool operating pressure

Scan to learn about our SENCO NEW line

of compressors.

For fasteners see page 53 Series AX

2" FinishPro®18 Brad Nailer and PC1010 Compressor Kit

PC0947

FinishPro®10 Micro Pinner SpecificationsSequential actuation triggerReg. Operating Pressure: 70-95 psiAir Inlet: 1/4" NPTTool Weight: 2.4 lbs (1.1 kg)Height: 6.75" (171 mm)Length: 8.89" (225 mm)Width: 1.64" (41 mm)

FastenerCapacity: 110 Gauge: 23Range: ½" – 1"

PC1010 Compressor SpecificationsPower source: ElectricMax. amp: 4 amps @115VHorsepower: ½ hp.(running)Pump: Oil freeSCFM @ 90 psi: 0.7Pump-up time: 0 - 125 psi 128 secondsRecovery time: 90 - 125 psi 35 secondsMax pressure: 125 psiTank storage: 1 gallonWeight: 20 lbs. (9.09 kg)Dimensions: length 14", height 13", width 10"

PC0974 Features• FinishPro® 10 Micro Pinner• 1 gallon electric oil-less compressor• ¼” x 25’ coil hose• All necessary air fittings• Safety glasses & Tool oil• Manuals• Variety pack of 23 ga. micro pins

FinishPro®10 Features• Extra power – for use with hard wood• Easy fastener length adjustment • Rear exhaust• Low load fastener indicator• Magazine bumper pad

PC1010 Compressor Features• ½hp. (running), Oil free Motor• 1 Gallon Capacity Tank• 4 amps @ 115V, 125 PSI max output• ¼" Quick Disconnect Coupler• Individual Gauges for tank and regulated

output pressure• Hand carry • Lightweight - 20 lbs. (9 kg)• Extremely Quiet: 68 dB A

FinishPro®18 Brad Nailer SpecificationsReg. Operating Pressure: 70-95 psigContact actuation trigger Air Inlet: 1/4" NPTTool Weight: 3 lbs (1.6 kg)Height: 9.3" (238 mm)Length: 9.75" (248 mm)

FastenerCapacity: 110 Gauge: 18Range: 5⁄8"- 2"

PC1010 Compressor SpecificationsPower source: ElectricMax. amp: 4 amps @ 115VHorsepower: ½ hp. (running)Pump: Oil free SCFM @ 90 psi: 0.7Pump-up time: 0 - 125 psi 128 secondsRecovery time: 90 - 125 psi 35 secondsMax pressure: 125 psiTank storage: 1 gallonWeight: 20 lbs. (9.09 kg)Dimensions: length 14", height 13", width 10"

_1

CZ.0267

C Z.0267

_1

_2

PC0974

For fasteners see page 53 - Series CZ

PC0947 Features• FinishPro®18 Brad Nailer• 1 gallon electric oil-less compressor• ¼” x 25’ coil hose• All necessary air fittings• Tool oil & Safety glasses• Manuals• Variety pack of 18 ga. brad nails

FinishPro®18 Features• Adjustable depth-of-drive control• Adjustable exhaust• Belt hook, comfort grip, no-mar pad• Lightweight and powerful

PC10101 Compressor Features• ½hp. (running), Oil free Motor• 1 Gallon capacity Tank• 4 amps @ 115V, 125 PSI max output• ¼" Quick Disconnect Coupler• Individual Gauges for tank and regulated

output pressure• Hand Carry • Lightweight - 20 lbs. (9 kg)• Extremely Quiet: 68 dB A

1" Micro Pinner and PC1010 Compressor Kit

Applications:Everything to get you started on the job is included in this one kit. Perfect for cabinet doors, small trim, glazing bead, carvings and ornamentals, picture frames, birdhouses, beehive assembly.

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

FINISH NAILER AND COMPRESSOR & TOOL KITS

Page 21: Senco Product Catalog

1 hp (running) 2½ Gallon Finish and Trim Air Compressor

PC1130

COMPRESSORS

1½ hp (running) 6 Gallon Pancake Air Compressor

NEW PC1280

Features• Oil free pump design – maintenance free, no oil leaks• Draws only 12 amps – will not trip circuit breakers• Integrated control panel – easy access to couplers and

pressure control knob; highly visible gauges• Pancake tank design – keeps compressor compact and well balanced• Weighs only 38 pounds• Dual couplers – run 2 hoses simultaneously• Fully shrouded – protects critical components• 150 Maximum psi

39

½ hp (Running) 1 Gallon Finish and Trim Air Compressor

½ hp (Running) 1 Gallon Finish and Trim Air Compressor

SpecificationsItem#: PC1010Power source: ElectricMax. amp: 4 amps @115VHorsepower: ½ (running)Pump: Oil freeSCFM @ 90 psi: 0.7Pump-up time: 0 - 125 psi 128 secondsRecovery time: 90 - 125 psi 35 secondsMax pressure: 125 psiTank storage: 1 gallonWeight: 20 lbs.

Dimensions Length: 14"Width: 10"Height: 13"

SpecificationsItem#: PC1010NPower Source: ElectricCurrent Draw: 4 amps@115VHorse Power: ½ (running)Pump: Oil freeMotor: InductionSCFM @ 90 psi: 0.7Pump Up Time : 125 seconds (0 – 135 psi)Recovery Time : 30 seconds (105 – 135 psi)Max psi: 135 psiTank Size: 1 gallonWeight: 21 lbs

DimensionsLength: 11.5” Width: 14.” Height: 12.25"

Features• Ultra Quiet operation – 68 dB A• Hand Carry - ultra-light, only 20 lbs.• Direct Drive induction motor/pump for efficient operation• 1 hp. (peak) .5hp.(running), oil-free motor• 1 Gallon air capacity• 4 amps @ 115V, 125 PSI Max Output• 1/4" Quick Disconnect Coupler• Individual gauges for tank and regulated output pressure• Oil free Pump• CSA approved

Features• Quiet operation – 68 dB A• Light – weighs only 21 lbs.• Induction motor – efficient, long life operation• Oil free pump design – maintenance free• Integrated control panel – easy access to couplers and pressure

control knob; highly visible gauges• Rugged roll cage – protects critical components

PC1010

NEW PC1010N

COMPRESSORS

LIMITEDWARRANTY

38

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

Features• Cast Iron Cylinder for superior pump life • Direct Drive Pump and induction motor for efficient operation• Lightweight “hot dog” Design for easy maneuverability• Draws only 13 amps, so it won’t trip circuit breakers• Cold Start Valve allows for easy start-up in cold climates• Oil-Splash Design for exceptional durability• Electric Overload protection switch with manual reset• Includes ¼" Universal Coupler and Compressor Oil• CSA approved

SpecificationsItem#: PC1130Power source: ElectricCurrent Draw. 13 amps @115VHorsepower: 1 (running)Pump: Oil-splashSCFM @ 90 psi: 3.5Pump-up time: 0 - 125 psi 39 secondsRecovery time: 90 - 125 psi 10 secondsMax pressure: 125 psiTank storage: 2.5 gallonWeight: 39 lbs.

DimensionsLength: 20.5"Width: 8"Height: 18.5"

LIMITEDWARRANTY

1¾ hp (running) 4½ Gallon Twin Stack Air Compressor

NEW PC0968N

Features• Induction motor – efficient, long life operation• Oil free pump design – maintenance free• Integrated control panel – easy access to couplers and pressure

control knob; highly visible gauges• Dual couplers – run 2 hoses simultaneously• Rugged roll cage – protects critical components and provides

multiple grip points for handling and portability• Low-volt start at 95 volts• 200 Maximum psi - More stored energy - Longer air tool run time - Efficiently maintains tool operating pressure

SpecificationsItem#: PC1280Power source: ElectricCurrent Draw. 12 amps @115VHorsepower: 1 ½ (running)Pump: Oil freeMotor: UniversalSCFM @ 90 psi: 2.8Pump-up time: 152 seconds (0 - 150 psi)Recovery time: 33 seconds (120-150 psi)Max pressure: 150 psiTank storage: 6 gallonWeight: 38. lbs.

Dimensions Length: 17"Width: 16.3"Height: 18"

SpecificationsItem #: PC0968NPower Source: ElectricCurrent Draw: 14 amps @120VHorsepower: 1 ¾ (running)Pump: Oil freeMotor: InductionSCFM @ 90 psi: 4.9Pump-up time: 95 seconds (0 -200 psi)Recovery time: 30 seconds (160-200 psi)Max pressure: 200 psiTank storage: 4.5 gallon Weight: 65 lbs

DimensionsLength: 17.25” Width: 21” Height: 17.75"

1 hp (Running) 2½ Gallon Twin Tank Finish and Trim Air CompressorSpecificationsItem#: PC0968Power source: ElectricMax. amp: 8 amps @115VHorsepower: 1 (running)Pump: Oil freeSCFM @ 90 psi: 2.2Pump-up time: 0 - 135 psi 82 secondsRecovery time: 90 - 135 psi 17 secondsMax pressure: 135 psiTank storage: 2.5 gallonsWeight: 38 lbs.

Dimensions Length: 16"Width: 15"Height: 13.5"

PC0968

SENCO Compressors are made to exacting standards. Only the highest quality components are specified to provide the reliability you expect from a SENCO product.

Features• Oil free design for less maintenance and no oil leaks• Direct drive pump and induction motor for efficient operation• Weighs 38 lbs., easy hand-carry use• Twin stack tanks• Draws only 8 amps, won’t trip circuit breakers• Cold start valve allows easy start-up in cold climates• Includes: ¼” quick disconnect coupler, regulator, tank and outlet

pressure gauges• CSA approved

Page 22: Senco Product Catalog

41

PC1131

40

LIMITEDWARRANTY

2 hp (running) 4.3 Gallon Twin Tank Air Compressor

COMPARE APPLICATIONS & FEATURES

APPLICATIONS PC1010N PC1010 PC0968 PC1130 PC1280Hobbies ● ● ● ● ●

Upholstery ● ● ● ● ●

Finish, trim ● ● ● ● ●

Light wood assembly ● ● ● ●

Picture Frames ● ● ● ●

Cabinets ● ● ●

FEATURESPower Source Electric Electric Electric Electric ElectricMax amp @ 115v 4 4 8 13 12HP Running ½ ½ 1 1 1½Pump Oil free Oil free Oil free Oil splash Oil freeSCFM @ 90 psig 0.7 0.7 2.2 3.5 2.8Pump Up/Recovery time 125 sec./ 30 sec. 128 sec../ 35 sec. 82 sec./ 17 sec. 39 sec./ 10 sec 152 sec./33 sec.Max pressure 135 psi 125 psi 135 psi 125 psi 150Tank storage 1 gal. 1 gal. Twin 2.5 gal. 2.5 gal. 6 gal..Weight 21 lbs. 20 lbs. 38 lbs. 39 lbs. 38 lbsLength/ Width/Height 11.5/14"/12.25" 14"/10"/13" 16"/15"/13.5" 20.5"/8"/18.5" 17"/16.3"/18"Cold start valve ● ● ●

Breaker ● ● ● ● ●

CSA Approved ● ● ● ● ●

Warranty 1 yr 1 yr 1 yr 1 yr 1 yr

APPLICATIONS PC0968N PC1131 PC0969 PC0970Upholstery ● ● ● ●

Finish, trim ● ● ● ●

Roofing ● ● ● ●Siding ● ● ● ●

Decking/Subfloors ● ● ●

Framing/Sheathing ● ● ● ●

Pallets/Packaging ● ● ●

FEATURESPower Source Electric Electric Electric ElectricMax amp @ 120v 14 14@ 115v 14 14HP Running 1¾ 2 1¾ 1¾Pump Oil free Oil splash Oil free Oil freeSCFM @ 90 psig 4.9 4.4 4.9 4.9Pump Up/Recovery time 95 sec./30 sec. 67 sec../ 16 sec. 90 sec./ 30 sec. 320 sec./ 85 sec.Max pressure 200 psi 125 psi 200 psi 200 psiTank storage Twin 4.5 gal. 4.3 gal. 4.5 gal. 15 gal.Weight 65 lbs. 60 lbs. 87 lbs. 99 lbs.Length/ Height/Width 17.25"/21"/17.75" 20.5"/16.5"/14.5" 18"/17"/27" 18.75"/19.25/40"Cold start valve ● ● ● ●

Breaker ● ● ● ●

CSA Approved ● ● ● ●

Warranty 1 yr 1 yr 1 yr 1 yr

COMPRESSORS

SpecificationsItem #: PC0969Power Source: ElectricCurrent Draw: 14 amps @120VHorsepower: 1¾ (running)Pump: Oil freeMotor: InductionSCFM @ 90 psi: 4.9Pump-up time: 95 seconds (0 -200 psi)Recovery time: 30 seconds (160-200 psi)Max pressure: 200 psiTank storage: 4.5 gallon Weight: 87 lbs

DimensionsLength: 18” Width : 17” Height: 27"

SpecificationsItem #: PC0970Power Source: ElectricCurrent Draw: 14 amps @120VHorsepower: 1¾ (running)Pump: Oil freeMotor: InductionSCFM @ 90 psi: 4.9Pump Up Time : 320 seconds (0 – 200 PSI)Recovery Time : 85 seconds (160 – 200 PSI)Max psi: 200 psiTank Size: 15 gallonWeight: 99 lbs

DimensionsLength: 18.75” , Width: 19.25” , Height: 40"

1¾ hp (running) 4½ Gallon Roll Away Air Compressor

1¾ hp (running) 15 Gallon Vertical Electric Air Compressor

NEW PC0969

NEW PC0970

Features• Induction motor – efficient, long life operation• Oil free pump design – maintenance free• Integrated control panel – easy access to couplers and

pressure control knob; highly visible gauges• Dual couplers – run 2 hoses simultaneously• Rugged roll cage – protects critical components and provides

multiple grip points for handling and portability• Telescoping handle – stays compact when unit is stored,

extends for easy transporting• Semi-pneumatic wheels – rugged, easy portability• Low-volt start at 95 volts• 200 Maximum psi - More stored energy - Longer air tool run time - Efficiently maintains tool operating pressure

Features• Induction motor – efficient, long life operation• Oil free pump design – maintenance free• Integrated control panel – easy access to couplers and

pressure control knob; highly visible gauges• Dual couplers – run 2 hoses simultaneously• Rugged roll cage – protects critical components and provides

multiple grip points for handling and portability• Telescoping handle – stays compact when unit is stored,

extends for easy transporting• Semi-pneumatic wheels – rugged, easy portability• Low-volt start at 95 volts• 200 Maximum psi - More stored energy - Longer air tool run time - Efficiently maintains tool operating pressure

LIMITEDWARRANTY

LIMITEDWARRANTY

Features• Cast Iron Cylinder for superior pump life• Direct Drive Pump and induction motor for efficient operation• Oil-Splash Design for exceptional durability• Draws only 14 amps, so it won’t trip circuit breakers• Cold Start Valve allows for easy start-up in cold climates• Twin Vertical Stack Tanks• Electric overload protection switch with manual reset• Includes ¼" Universal Coupler and Compressor Oil• CSA approved

SpecificationsPower source: ElectricCurrent Draw. 14 amps @115VHorsepower: 2 (running)Pump: Oil-splashSCFM @ 90 psi: 4.4Pump-up time: 0 - 125 psi 67 secondsRecovery time: 90 - 125 psi 16 secondsMax pressure: 125 psiTank storage: 4.3 gallonWeight: 60 lbs.

Dimensions Length: 20.5"Width: 16.5"Height: 14.5"

Page 23: Senco Product Catalog

NEW DS215-18V Item #: 7W0001N

NEW DS212-18V Item #: 7X0001N

2" Cordless 18v Li-ion 2,500 RPM ApplicationsUnderlayment and flooring, fiberglass backed gypsum sheathing, sheathing to wood, drywall to steel, metal framing, sheathing to steel, drywall to wood, wood decking, cement board, structural steel decking, composite decking.

Features• 2500 rpm high-torque motor• Patent pending corner-fit feed system• Tool-free screw length adjustment• Precise depth-of-drive adjustment with depth lock• Quick slide button bit change • Variable speed trigger with lock and reverse• Belt hook -right or left handed adjustable

Includes• Two-18V li-Ion batteries, charger, drywall nosepiece, wood

nosepiece, storage bag, 2 drive bits

SpecificationsItem# 7X0001NRPM: 0 –2,500Battery: 18-Volt 1.5 Ah Compact Li-ionTorque: 90 inlbWeight: 4.95 lbs. (2.24 kg)Height: 9.5" (241 mm)Length: 15" (381 mm)Width: 3.4" (86 mm)Recharge Time: 1 hourDrives per charge: 500-700

FastenerScrew Diameters: #6 – #10Screw Lengths: 1" – 2"*For fasteners see page 73-77

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

43

2" Cordless 18v Li-ion 5,000 RPM

NEW DS312-18V Item #: 7Y0001N

3" Cordless 18v Li-ion 2,500 RPM ApplicationsSheathing to wood, sheathing to steel, wood decking, composite decking, rigid foam insulation, cement board, underlayment and flooring, drywall to wood, drywall to steel, fiberglass backed gypsum sheathing, metal framing, structural steel decking..

Features• 2500 rpm high-torque motor• Patent pending corner-fit feed system• Patented sliding screw guide• Tool-free screw length adjustment• Precise depth-of-drive adjustment with depth lock• Quick slide button bit change • Variable speed trigger with trigger lock• Belt hook -right or left handed adjustable

Includes• Two-18V li-Ion batteries, charger, drywall nosepiece, wood nose

piece, storage bag, 2 drive bits

ApplicationsDrywall to wood, drywall to steel, cement board, sheathing to wood, underlayment and flooring, fiberglass backed gypsum sheathing, sheathing to steel, wood decking, metal framing, structural steel decking.

Features• 5000 rpm high-speed motor• Patent pending corner-fit feed system• Tool-free screw length adjustment• Precise depth-of-drive adjustment with depth lock• Quick slide button bit change • Variable speed trigger with lock and reverse• Belt hook -right or left handed adjustable

Includes• Two-18V li-Ion batteries, charger, drywall nosepiece, wood

nosepiece, storage bag, 2 drive bits

SpecificationsItem# 7Y0001NRPM: 0 –2,500 Battery: 18-Volt 1.5 Ah Compact Li-ionVoltage: 18 Torque: 90 inlbWeight: 5.1 lbs. (2.3 kg)Height: 9.5" (241 mm)Length: 15.5" (394 mm)Width: 3.4" (86 mm)Recharge Time: 1 hourDrives per charge: 300-700

FastenerScrew Diameters: #6 – #10 Screw Lengths: 1" – 3"For fasteners see page 73-77

SpecificationsItem# 7W0001NRPM: 0 – 5,000Battery: 18-Volt 1.5 Ah Compact Li-ionTorque: 60 inlbWeight: 4.9 lbs. (2.22 kg)Height: 9.5" (241 mm)Length: 15" (381 mm)Width: 3.4" (86 mm)Recharge Time: 1 hourDrives per charge: 500-700

FastenerScrew Diameters: #6 – #8 Screw Lengths: 1" – 2"*For fasteners see page 73-77

Sold separatelyDrive Bits-two per pack: EA0300, EA0301, EA0302

Accessories page 78-79

42

An independent productivity analysis compared SENCO AUTO-FEED SCREW SYSTEMS to loose screw fastening - and the results were dramatic.

SENCO Duraspin Auto-Feed Screw Systems increase overall site productivity by 30% over traditional installation methods.

On Average a Duraspin Auto-Feed Screw System tool user can hang a sheet of 4’ x 12’ drywall in just over 60 seconds, as compared to 4-8 minutes using none auto-feed screwdriver.

Loading and driving screws were reduced from 4-7 seconds (required by bulk screwdrivers) to under 1 second per screw with SENCO Duraspin.

Duraspin Auto-Feed Screw Systems eliminates the need to reach for fasteners and position them on magnetic screw tip.

Duraspin allows for one-handed screw fastening with either the right or left hand, freeing the second hand to steady your work surface.

Duraspin Cordless tools eliminates tangled extension cords, tripping hazards and slowdowns resulting from unplugging cords.

Increase Job SiteProductivity By 30%!

PRODUCTIVITY FINDINGS

than corded screwdriversand loose screws*

4X FASTER

• DuraSpin Screw Fastening System Time & Motion Study. July, 2001. R.S.MEANS. CONSULTING SERVICES.

Can hang 2000 Sq. ft.of Drywall per Day

Can hang 2640 Sq. ft.of Drywall per Day

An Average 2500 Sq. ft. homeUses 8100 Sq. ft. of drywall

[with 3 crew members working an eight hour day]

Screwdriverswith loose screws

vs. DuraspinAuto-Feed Screw Systems

= 3.07 daysto complete home

= 4.05 daysto complete home

SENCO® AUTO-FEED SCREWDRIVERS SENCO® AUTO-FEED SCREWDRIVERSSENCO's Auto-Feed Screw Systems are the perfect solution for high volume production as well as one man operations, it's like having an extra hand. Our auto-feed screw systems will dramatically increase your productivity and job site safety, saving you time and money on every job.

Sold separately* FC0822 Nosepiece drives 1/2”–2” screws.Drive Bits-two per pack: EA0297, EA0298, EA0299

Accessories page 78-79

Sold separately* FC0822 Nosepiece drives 1/2”–2” screws.Drive Bits-two per pack: EA0297, EA0298, EA0299

Accessories page 78-79

Page 24: Senco Product Catalog

NEW DS220 Item#: 6W0001N

LIMITEDWARRANTY

LIMITEDWARRANTY

3" Auto-feed Attachment for Screwdrivers SpecificationsItem #: 6W0003NWeight: 3.5 lbs (1.6 kg)Height: 3.5" (89 mm)Length: 20.5" (521 mm)Width: 2.75" (70 mm)Requires Assembly to Screwdriver

FastenerScrew Diameters: #6 – #12Screw Lengths: 1" – 3"For fasteners see page 73-77

Sold separatelyDrive Bits-two per packBulk Screwdriver adapter for major brands

Accessories see page 78-79

Applications:Sheathing to wood, sheathing to steel, wood decking, composite decking, underlayment and flooring, structural steel decking, drywall to wood, drywall to steel, cement board, fiberglass backed gypsum sheathing, rigid foam insulation, metal framing.

Features• Precise depth-of-drive adjustment with depth

lock• Patented sliding rail• Patent pending corner-fit feed system• Includes extension pole with adjustable

power grip handle for driving screws in a standing position.

Includes• Attachment, extension pole with adjustable

power grip handle, and toe-nail nose piece.

NEW DS320 Item #: 6W0003N

2" Auto-feed Attachment for Screwdrivers SpecificationsItem Code: 6W0001NWeight: 1.5 lbs (.68 kg)Height:3.5" (89 mm)Length: 20.5" (521 mm)Width: 2.75" (70 mm)Requires Assembly to Screwdriver

FastenerScrew Diameters: #6 – #10Screw Lengths: 1" – 2"*For fasteners see page 73-77

Sold separately*FC0822 Nosepiece drives 1/2”–2” screws.Drive Bits-two per pack

Bulk Screwdriver adapter for major brands

Accessories see page 78-79

Applications:Drywall to wood, drywall to steel, sheathing to wood, sheathing to steel, wood decking, cement board, composite decking, underlayment and flooring, metal framing, structural steel decking, fiberglass backed gypsum sheathing.

Features• Precise depth-of-drive adjustment with depth

lock• Patented sliding rail• Patent pending corner-fit feed system

NEW DS332-AC Item #: 7V0001N

LIMITEDWARRANTY

LIMITEDWARRANTY

LIMITEDWARRANTY

44

NEW DS235-AC Item #: 7T0001N

NEW DS232-AC Item #: 7U0001N

2" Corded 2,500 RPM

2" Corded 5,000 RPM

3" Corded 2,500 RPM

SENCO® AUTO-FEED SCREW SYSTEMS AND ATTACHMENTS

45

Sold separately* FC0822 Nosepiece drives 1/2”–2” screws.Drive Bits-two per pack: EA0297, EA0298, EA0299

Accessories page 78-79

Sold separately* FC0822 Nosepiece drives 1/2”–2” screws.Drive Bits-two per pack: EA0297, EA0298, EA0299

Accessories page 78-79

SENCO® AUTO-FEED SCREWDRIVERS

ApplicationsSheathing to steel, sheathing to wood, drywall to steel, underlayment and flooring, fiberglass backed gypsum sheathing, metal framing, drywall to wood, wood decking, composite decking, cement board, structural steel decking.

Features• 0 –2500 rpm high-torque AC motor• Patented-pending corner access feed system• Variable speed trigger with reverse• Tool-free screw length adjustment• Precise depth-of -adjustment with depth lock • Slide button bit change• Belt hook -right or left handed adjustable

Includes• Drywall nosepiece, wood nosepiece, storage bag, 2 drive bits

ApplicationsDrywall to wood, drywall to steel, cement board, sheathing to wood, underlayment and flooring, fiberglass backed gypsum sheathing, sheathing to steel, wood decking, composite decking, metal framing, structural steel decking.

Features• 5000 rpm high-speed AC motor• Patent pending corner-fit feed system• Tool-free screw length adjustment• Precise depth-of-drive adjustment with depth lock• Quick slide button bit change• Variable speed trigger with lock and reverse• Belt hook-right or left handed adjustable

Includes• Drywall nosepiece, wood nosepiece, storage bag, 2 drive bits

SpecificationsItem #: 7U0001NRPM:0 –2,500 Torque: 100 inlbAmp draw: 6.0Voltage: 120 V/60 HzWeight: 4.75 lbs. (2.15 kg) Height: 9.2" (233 mm) Length: 16.75" (425 mm) Width: 2.75" (70 mm)

FastenerScrew Diameters: #6 – #12Screw Lengths: 1" – 2"*For fasteners see page 73-77

SpecificationsItem #: 7T0001NRPM: 0–5,000 Torque: 50 inlbAmp draw: 6.0Voltage: 120 V/60 HzWeight: 4.7 lbs. (2.13 kg) Height: 9.2" (233 mm) Length: 16.75" (425 mm) Width: 2.75" (70 mm)

FastenerScrew Diameters: #6 – #10Screw Lengths: 1" – 2"*For fasteners see page 73-77

ApplicationsSheathing to steel, rigid foam insulation, drywall to wood, drywall to steel, cement board, wood decking, composite decking, underlayment and flooring, fiberglass backed gypsum sheathing, structural steel decking, metal framing.

Features• 0 –2500 rpm high-torque AC motor• Patent pending corner-fit feed system• Variable speed trigger with lock and reverse• Tool-free screw length adjustment• Patented sliding screw guide• Precise depth-of-drive adjustment with depth lock• Quick slide button bit change• Belt hook-right or left handed adjustable

Includes• Drywall nosepiece, wood nosepiece, storage bag, 2 drive bits

SpecificationsItem# 7V0001NRPM: 0 –2,500Torque: 100 inlbAmp draw: 6.0Voltage: 120 V/60 HzWeight: 4.8 lbs. (2.17 kg)Height: 9.2" (233 mm)Length: 17.25" (438 mm)Width: 2.75" (70 mm)

FastenerScrew Lengths: 1" – 3" Screw Diameters: #6 – #12For fasteners see page 73-77

Sold separatelyDrive Bits-two per pack: EA0300, EA0301, EA0302

Accessories page 78-79

Page 25: Senco Product Catalog

LIMITEDWARRANTY

LIMITEDWARRANTY

3" Corded Attachment with 2500 RPM Screwdriver Kit Applications:Sheathing to wood, sheathing to steel, wood decking, cement board, underlayment and flooring, drywall to wood, drywall to steel, composite decking, fiberglass backed gypsum sheathing, structural steel decking, rigid foam insulation, metal framing.

Features• Includes extension pole with adjustable power grip

handle for driving screws in a standing position• Precise depth-of-drive adjustment with depth lock • Patented sliding rail• High torque 2500 rpm motor• Patent pending corner-fit feed system • Rugged storage bag fits fully assembled kit• Quick release for easy bit access

Includes• SENCO SG2510 screwdriver, industrial grade DS320

attachment, extension pole with adjustable power grip handle, storage bag and 3 drive bits.

LIMITEDWARRANTY

4746

High Performance 4,000 RPM Screwdrivers

High Performance 2,500 RPM Screwdrivers

ApplicationsSheathing to wood, sheathing to steel, wood decking, cement board, underlayment and flooring, drywall to wood, drywall to steel, composite decking, fiberglass backed gypsum sheathing, structural steel decking, rigid foam insulation, metal framing.

Features• Metal gear housing for increased durability and reliability• Depth sensitive clutch with adjustable nose cone for precise depth control• For a perfect mate to Senco’s DuraSpin Auto-Feed attachments use MB0173 adapter• High speed 4000 rpm motor• 10' cord for greater mobility• Reversing lever• Trigger lock

Includes• Two drive bit tips

ApplicationsSheathing to wood, sheathing to steel, wood decking, composite decking, underlayment and flooring, structural steel decking, cement board, drywall to steel, fiberglass backed gypsum sheathing, metal framing, rigid foam insulation, drywall to wood.

Features• Metal gear housing for increased durability and reliability• Depth sensitive clutch with adjustable nose cone for precise depth control• For a perfect mate to Senco’s DuraSpin Auto-Feed attachments use MB0173 adapter• High torque 2500 rpm motor• 10' cord for greater mobility• Reversing lever• Trigger lock

Includes• Two drive bit tips

SpecificationsItem #: 6X0004NBit Shank Size: 1/4 hexVolts: 120 Amps: 6.5No Load Speed: 0-4000Torque: 82 inlbClutch: StandardWeight: 3.1 lbs (1.4 kg)Height: 8" (203 mm)Length: 9.5' (241 mm)Width: 2.65" (67 mm)

Sold separatelyDrive Bit Tips-two per pack EEA0308

Accessories see page 78-79

SpecificationsItem #: 6X0002NBit Shank Size: 1/4 hexVolts: 120 Amps: 6.5No Load Speed: 0-2500Torque: 100 inlbClutch: StandardWeight: 3.3 lbs (1.6 kg)Height: 8" (203 mm)Length: 10' (245 mm)Width: 2.65" (67 mm)

Sold separatelyDrive Bit Tips-two per pack EEA0308

Accessories see page 78-79

These High Performance SENCO® screwdrivers are the ideal tools for users who require power, speed, and versatility. The SG2510 and SG4100 tools feature a high-torque, variable-speed motor to tackle tough drywall, wood, and steel applications.

NEW SG2510 Item #: 6X0002N

SENCO® SCREWDRIVERS

NEW SG4100 Item #: 6X0004N

SENCO® AUTO-FEED ATTACHMENT KITS

NEW DS425AC Item #: 6W0012N

SpecificationsItem# 6W0012NRPM: 0 –2500Torque : 100 inlbAmps draw: 6.4Weight: 6.75. lbs (3 kg)Height: 8" (203 mm)Length: 20.5" (521 mm)with extension pole: 39.0 (990 mm)Width: 2.75" (70 mm)

FastenerScrew Lengths: 1" – 3" Screw Diameters: #6 – #12For fasteners see page 74-77

Sold separatelyDrive Bits-two per pack EA0314 EA0315 EA0316

Accessories see page 78-79

Models available with 2500 or 4000 RPM Screwdrivers.

3 in 1TOOL

1) Extension for subfloor and decking2) 5/8” to 3” Auto-Feed Attachment3) Drives bulk screws

3" Corded Attachment with 4000 RPM Screwdriver Kit

LIMITEDWARRANTY

NEW DS440AC Item #: 6W0011N

SpecificationsKit Item# 6W0011NRPM: 0-4000Torque : 82 inlb Amps draw: 6.4Weight: 6.5 lbs (2.95 kg)Height: 8" (203 mm)Length: 20.5" (521 mm)with extension pole: 39.0" (990)Width: 2.75" (70 mm)

FastenerScrew Lengths: 1" – 3" Screw Diameters: #6 – #12For fasteners see page 74-77

Sold separatelyDrive Bits-two per pack EA0314 EA0315 EA0316

Accessories see page 78-79

Applications:Sheathing to wood, sheathing to steel, wood decking, composite decking, underlayment and flooring, structural steel decking, cement board, drywall to steel, fiberglass backed gypsum sheathing, metal framing, rigid foam insulation, drywall to wood.

Features• Includes extension pole with adjustable power grip

handle for driving screws in a standing position• Precise depth-of-drive adjustment with depth lock • Patented sliding rail• High speed 4000 rpm motor• Patent pending corner-fit feed system • Rugged storage bag fits fully assembled kit• Quick release for easy bit access

Includes• SENCO SG4100 screwdriver, industrial grade DS320

attachment, extension pole with adjustable power grip handle, storage bag and 3 drive bits

Scan to learn about Auto-Feed

Screwdrivers

Page 26: Senco Product Catalog

4948

SENCO® AUTO-FEED SCREW SYSTEMS

DS332-AC DS220 DS320 DS440AC DS425AC

1" - 3" 1" - 2" 1" - 3" 1" - 3" 1" - 3"

#6 - #12 #6 - #10 #6 - #12 #6 - #12" #6 - #12

0 - 2500 - - 0 - 4000 0 - 2500

100 - - 82 100

6 - - 6.4 6.4

- - - - -

4.8 lbs 3.5 lbs 3.5 lbs 6.5 lbs 6.75 lbs

Yes - - Yes Yes

Corded - - Corded Corded

- Yes Yes Included Included

1 yr 1 yr 1 yr 1 yr 1 yr

7V0001N 6W0001N 6WOOO3N 6W0011N 6W0012N

Corded Attachments & Screwdriver with Attachment Kits

COMPARE APPLICATIONS & FEATURES

APPLICATIONS DS215-18v DS212-18v DS312-18v DS235-AC DS232-AC

Drywall to Wood

Drywall to Steel

Sheathing to Wood

Sheathing to Steel

Wood Decking

Composite Decking

Cement Board

Underlayment & Flooring

Fiberglass Backed Gypsum Sheathing

Metal framing

Structural Steel Decking

Rigid Foam Insulation

Good Better BESTScrew Systems Recommendations

FEATURES

Screw Range 1" - 2" 1" - 2" 1" - 3" 1" - 2" 1" - 2"

Screw Diameter #6 - #8 #6 - #10 #6 - #10 #6 - #10 #6 - #12"

Speed (RPM) 0 - 5000 0 - 2500 0 - 2500 0 - 5000 0 - 2500

Torque (in lbs) 60 90 90 50 100

Current (Amps) - - - 6 6

Voltage (Volts) 18 18 18 - -

Weight (lbs) 4.9 lbs 4.95 lbs 5.1 lbs 4.7 lbs 4.75 lbs

Reversible Yes Yes Yes Yes Yes

Power Type 18v Li-ion 18v Li-ion 18v Li-ion Corded Corded

Assembly to Screwdriver - - - - -

Warranty 1 yr 1 yr 1 yr 1 yr 1 yr

Item # 7W0001N 7X0001N 7Y0001N 7T0001N 7U0001N

Auto-Feed Screwdrivers:

Cordless 18v Li-ion

Scan to learn about our NEW line of SENCO Auto-Feed Screwdrivers

Scan to see Duraspin Auto-Feed Screwdrivers in 3D

Page 27: Senco Product Catalog

51

SENCO Fastener Identification Charts

T 26 2 3/4 (70mm) 6 .181 V Coil, con. wnd., angular, wire collation

Example: KC27APBK = .131"C = Flathead, Smooth Shank27 = 3” nailA = Diamond PointP = Bright Basic, Standard TensileB = Sencoted

U 27 3 (76mm) 14. .08 W Con. wnd., straight wire collation, 8.2mm spacing28 3 1/4 (82mm)W 1. .122 X Three-quarter strip length

Z 29 3 1/2 (90mm)Special Fast. Y Coil, Inverted con. wnd., straight plastic collation1 30 2 5/8 (66mm) 11.75 .110 Z Coil, con. wnd., straight wire 5.5 & 6.5mm spacing2 31 4 (102mm) 7. .1773 32 4 1/4 (108mm) 17. .054

33 4 1/2 (114mm)34 5 (127mm)

4 FRH nail, plastic collation 17°3 Finish nail ⁄ alternate angle collation

46 35mm (1-3/8)47 40mm (1-9/16)49 45mm (1-3/4)51 50mm (2)52 55mm (2-1/8)54 60mm (2-3/8)55 65mm (2-9/16)56 70mm (2-3/4)57 75mm (3)58 80mm (3-1/8)59 90mm (3-9/16)60 100mm (4)61 110mm (4-5/16)62 115mm (4-1/2)63 120mm (4-3/4)64 125mm (4-7/8)65 130mm (5-1/8)66 135mm (5-5/16)67 140mm (4-1/2)68 145mm (5-3/4)69 150mm (6)70 160mm (6-1/2)74 2 7/8 (73mm)85 85mm (3-5/16)95 95mm (3-3/4)

A 08 1/2 (12mm) 18. .039 A Coil, �at wnd., angular wire, 6.0mm Euro, bulk packA DiamondB Blunt DiamondC BluntE ChiselF Blunt ChiselG Semi-BluntX Special

B 10 5/8 (16mm)1 2.5 .099 B Coil, �at wound, straight wire, carrier stripC 11 3/4 (19mm) 23. .0267 C Coil, �at wound, angular wire,carrier stripD 12 7/8 (22mm) 15. .072 D FRH-paper tape, 34° collation E 13 1 (25mm) 13. .092 F Coil, �at wound, angular wire, 8.2mm spacingF 14 1 1/8 (28mm) 12.62 .097 G Coil, �at wound, straight wireG 15 1 1/4 (32mm) 11.5 .113 H Coil, �at wound, angular wire, 7.0mm spacingH 16 1 3/8 (35mm) 11. .120 J Special head featureI 17 1 1/2 (38mm) 11. .124 K Special strip lengthJ 18 1 5/8 (41mm) 12. .105 L FRH plastic collation 7.5mm spacingK 19 1 3/4 (44mm) 10.25 .131 N Carton count changeL 20 1 7/8 (48mm) 10.25 .135 P Bulk pack or high load coilM 21 2 (50mm) 9. .148 Q .300 DI. head drywall nailN 22 2 1/8 (54mm) 8. .162 R Retail packagingP 23 2 1/4 (56mm) 13.5 .086 S FRH-Strip, plastic collationR 24 2 3/8 (60mm) 16. .063 T FRH, 20° paper tape collationS 25 2 1/2 (63mm)13.75 .082 U Coil, inverted con. wnd., angular, plastic collation

S 7/16 .083 1417 1-1/2 (38mm)

25 2-1/2 (63mm)26 2-3/4 (70mm)27 3 (76mm)28 3-1/4 (82mm)

Z Special Fasteners 1 1-3/8

23 2-1/4 (56mm)24 2-3/8 (60mm)

29 3-1/2 (90mm)

7th DIGITFinish

8th DIGITFeatures

6th DIGITWire Chem. & Fin

3rd & 4th DIGITLength

2nd DIGITHead/Shank Form

1st DIGITGauge inch

5th DIGITPoint.

6th DIGITCoating

7th DIGITFeatures

5th DIGITWire Chem. & Fin

2nd & 3rd DIGITLeg Length

1st DIGITCrown Width Thk. Ga.

4th DIGITPoint.

A 3/16 .030 .021 5 01 1/8 (3mm)2202 5/32 (4mm) B 1/2 .030 .021 5 2203 3/16 (5mm)

A Galv. Std. Tensile. A in N,P,Q, S wire staples only Class 1 GalvanizedB Galv. High TensileC Liq. Fin. Std. High Ten.D Liq. Fin. Ult. High Ten.E Liq. Fin. Low TensileF SenclampG Stainless SteelH Stainless Steel Hi. Ten. AISI-304J MonelK Steel Core AluminumL Steel Core BronzeM AluminumN BronzeP Reg. Galv. (�ash) or GreaterQ Class 1 Galv. Std. TensileR Brt. Basic Std. TensileS Special Hardened SteelU Stainless Steel, AISI-316

C 3/8 .030 .021 5 22D 3/16 .030 .021 5 04 1/4 (6mm)22E 3/16 .050 .019 05 5 /16 (8mm)20F 1/2 .050 .019 06 3/8 (10mm)20G 3/8 .045 .023 07 7/16 (11mm)20H 7/16 .050 .019 08 1/2 (12mm)20J 7/16 .075 .023 09 9/16 (14mm)18K 1/4 .045 .030 10 5/8 (16mm)19

R 3/16 .045 .03016 1-3/8 (35mm)

19

Y 7/16 .082 .02

.075 .035

022 2-1/8 (54mm)

25X 1 .082 .020

21 2 (50mm)25

W 3/16 .032 .02520 1-7/8 (48mm)

21U 1 1/4 .075 .035

19 1-3/4 (44mm)14

14

T 1 .086 .07018 1-5/8 (41mm)

14

L 1/4 .050 11 3/4 (19mm)18.044M 3/8 .050 18 12 7/8 (22mm).044

Q 7/16 .074 1515 1-1/4 (32mm)

.067

.075

N 7/16 .062 7/16 .058

16 13 1 (25mm).055

P 1 .06214 1-1/8 (28mm)

16.055O 17.050

A Clear GlueB SencoteC Painted & SencoteD Painted & SencoteE CoatedF To be PaintedG Extractable

B BandlineC ContainerG GlueN Carton count changeP Bulk packR Retail packS Special strong glueT Taped stripsV Angular stripsZ Coiled Staples

Example: G08BAAG = 3/8” Crown, .045” Width, .023” Thickness08 = 1/2” Leg LengthB = Chisel PointA = Galvanized Standard Tensile (Class 1 Galv. only for N, P, Q, S staples)A = Plain

A BluntB ChiselC Inside ChiselD Outside ChiselE Easy ClinchF DivergentG Outside Chisel Div.H Cross Cut ChiselJ Cross Cut Chisel Div.K SpearL Chisel Div.M Self ClinchN Sharp ChiselR Step

A Brad, SmoothC Flat, SmoothD Flat, Smooth FRHE Flat, Ring ShankF Flat, Screw ShankG Conical, Ring Drywall FRHH T-head, SmoothJ Flat, Smooth O/S FRHK Flat, Screw O/S FRHL Flat, Ring FRHM Flat, Ring O/S FRHN Flat, Smooth U/S FRHR Duplex HeadS Flat, Ring, Dome, FRHT Full Length Step RingU Bugle, Smooth FRHV Bugle, Ring FRHW L-head “Cleat” Flooring NailX Med. Head BradY Slight Head BradZ Headless Pin1 Flat, 1/3 Ring2 Flat, 1/3 Screw3 Dome, Smooth, O/S4 Dome, Ring O/S5 O�set FRH, Smooth6 O�set FRH, Ring

A Reg. Galv. Std. Ten.B Reg. Galv. Olive DrabD ExteriorE Hot Dip Galv. Heat Trtd.G Stainless Stl. AISI-304H Bright Basic Ht. Trtd.I Reg. Galv. Ht. Trtd.J Hot Dip Galv. Med. CarbonM AluminumP Bright Basic Std. Ten.Q Bright Basic Med. CarbonR Reg. Galv. Yel. ChromateS Hot Dip Galv. 43 MicronT “Flash” Galv. or GreaterU Stainless Stl. AISA-316X Hot Dip Galv. 50 MicronZ Bronze

A PlainB SencoteC PaintedD Painted & SencoteE Coated by VendorF Sencoted-Full Cov.S New Glue

FRH = Full Round HeadO/S = Oversize HeadU/S = Undersize Head

Fastener Identification

7-DIGIT STAPLE CODING SYSTEM

8-DIGIT NAIL CODING SYSTEM

FASTENER CODING

50

DA25

DA23

DA21

DA19

DA17

DA15

DA13

.072 .072 .072 .072 .072 .072 .072

FinishPro 42XP

GT65DAF-15

FinishPro 35MgSFN30

(8d)(7d)(6d)(5d)(4d)(2d) (3d)

1_

1¼ __

1½__

1¾__

2_

2¼__

2½__

1 DA13EPBN 4.M Chisel Bright Sencote Box 1¼ DA15EPBN 4.M Chisel Bright Sencote Box 1½ DA17EPBN 4.M Chisel Bright Sencote Box 1¾ DA19EPBN 4.M Chisel Bright Sencote Box 2 DA21EPBN 4.M Chisel Bright Sencote Box 2¼ DA23EPBN 4.M Chisel Bright Sencote Box 2½ DA25EPB 3.M Chisel Bright Sencote Box 1½ A301500 0.7M Chisel Bright Sencote Clamshell 1¾ A301750 0.7M Chisel Bright Sencote Clamshell 2 A302000 0.7M Chisel Bright Sencote Clamshell 2½ A302500 0.7M Chisel Bright Sencote Clamshell 1¼ DA15EABN 4.M Chisel Galv Sencote Box 1½ DA17EABN 4.M Chisel Galv Sencote Box 1¾ DA19EABN 4.M Chisel Galv Sencote Box 2 DA21EABN 4.M Chisel Galv Sencote Box 2½ DA25EAB 3.M Chisel Galv Sencote Box 2 A302009 0.7M Chisel Galv Sencote Clamshell 2½ A302509 0.7M Chisel Galv Sencote Clamshell 2 DA21EGBN 2.M Chisel Stainless Sencote Box 2½ DA25EGB 1.2M Chisel Stainless Sencote Box 1½ DA17AIA 4.M Diamond Hardened* Plain Box 1¾ DA19AIA 4.M Diamond Hardened* Plain Box

*Hardened reg. galv. heat treated 15 gauge for steel stud and trim application

SENCO® 15 Ga. 34˚Angled Strip Finish NailsFurniture and cabinets, molding and trim, baseboard, chair rail, doors and window casings BoxLength Item Code Count Point Finish Coating Package

Finish Nails Angled Strip

FASTENERS

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

Page 28: Senco Product Catalog

Brad Nails Straight Strip

5352

M00

1002

A40

1259

M00

1003

A40

1509

M00

1004

A40

1759

M00

1005

A40

2009

M00

1007

A40

2509

.063.063 .063 .063 .063 .063

FinishPro 32

F-16S

(8d)(6d)(5d)(4d)(3d)

M00

1001

A40

1009

(2d)

1_

.063

M00

1000

0

(2d)

¾_

1¼ __

1½__

1¾__

2_

2½__

RH15

EAA

RH17

EAA

RH19

EAA

RH21

EAA

RH25

EAA

.063 .063 .063 .063 .063

FinishPro 33MgF-16A

GT65RHA

(8d)(6d)(5d)(4d)(3d)

1¼ __

1½__

1¾__2_

2½__

SENCO® 16 Ga. Straight Strip Finish Nails

SENCO® 16 Ga. 20° Angled Strip Finish Nails*

¾ M001000 2.M T-head Chisel Galv Sencote Box 1 M001001 2.M T-head Chisel Galv Sencote Box 1¼ M001002 2.M T-head Chisel Galv Sencote Box 1½ M001003 2.M T-head Chisel Galv Sencote Box 1¾ M001004 2.M T-head Chisel Galv Sencote Box 2 M001005 2.M T-head Chisel Galv Sencote Box 2½ M001007 2.M T-head Chisel Galv Sencote Box 1 A401009 1.2M T-head Chisel Galv Plain Clamshell 1¼ A401259 1.2M T-head Chisel Galv Plain Clamshell 1½ A401509 0.7M T-head Chisel Galv Plain Clamshell 1¾ A401759 0.7M T-head Chisel Galv Plain Clamshell 2 A402009 0.7M T-head Chisel Galv Plain Clamshell 2½ A402509 0.7M T-head Chisel Galv Plain ClamshellVariety *A409809 0.8M T-head Chisel Galv Plain Clamshell 1½ M001003GR 0.7M T-head Chisel Stainless Plain Box 2 M001005GR 0.7M T-head Chisel Stainless Plain Box 2½ M001007GR 0.7M T-head Chisel Stainless Plain Box*packs contain assorted 1¼, 1½”, 2”, 2½” nails.

Furniture and cabinets, molding and trim, baseboard, chair rail, window casings and upholstery trim panels BoxLength Item Code Count Head Point Finish Coating Package

1¼ RH15EAA 2.M T-head Chisel Galv Sencote Plastic Box 1½ RH17EAA 2.M T-head Chisel Galv Sencote Plastic Box 1¾ RH19EAA 2.M T-head Chisel Galv Sencote Plastic Box 2 RH21EAA 2.M T-head Chisel Galv Sencote Plastic Box 2½ RH25EAA 2.M T-head Chisel Galv Sencote Plastic Box

*NOTE: ONLY Fits 16 Gauge 20-Degree Finish Nailers

BoxLength Item Code Count Head Point Finish Coating Package

AZ = headless bradAY = slight-headed brad

½ AZ08EAA 5.M Headless Galv Plain Box ¾ AZ11EAA 5.M Headless Galv Plain Box 1 AZ13EAA 5.M Headless Galv Plain Box 5⁄8 AY10EAA 5.M Slight Galv Plain Box ¾ AY11EAA 5.M Slight Galv Plain Box 1 AY13EAA 5.M Slight Galv Plain Box

SENCO® 18 Ga. Brad NailsCabinets, decorative trim, picture frames and ornamentals BoxLength Item Code Count Head Finish Coating Package

F-18, SLP20XPFinishPro 25XP

AY10

AY11

AY13

5/8__3/4__

1_

LS1

AZ08

AZ11

AZ13

1/2__

3/4__

1_

.0468 .0468 .0468 .0468 .0468 .0468

21GA

FASTENERS

AX = medium-headed brad

FinishPro10

FinishPro23SXPFinishPro23LXP

A109809Variety Pack

A209809Variety Pack

FinishPro11

A209909Variety Pack

A109909Variety Pack

1_

1¼_13/8__

1½_

2_

1/2__5/8__

3/4__

AX10

AX11

ZX11

AX13

AX15

AX17

AX18

FinishPro 25XP

FinishPro 21LXP

FinishPro 18 Combo Kit

FinishPro 10 Combo Kit

FinishPro 18Mg F-18

SLP20XPFinishPro 2N1

15/8__

AX19

13/4__

AX21

2_

AX22

21/8__

11/2__

5/8__3/4__

3/4__

1_

ZX10

ZX13

5/8__

1_

11/4__

ZX16

ZX18

15/8__

ZX21

2_

13/8__

½ CZ08EAAN 15.5M Headless Galv Plain Box 5⁄8 CZ10EAAN 15.5M Headless Galv Plain Box ¾ CZ11EAAN 15.5M Headless Galv Plain Box ½ A100509 2.6M Headless Galv Plain Clamshell 5⁄8 A100629 2.6M Headless Galv Plain Clamshell ¾ A100759 2.6M Headless Galv Plain Clamshell 1 A101009 2.6M Headless Galv Plain Clamshell 1¼ A101259 2.6M Headless Galv Plain Clamshell 13⁄8 A101379 2.6M Headless Galv Plain Clamshell 1½ A101509 2.6M Headless Galv Plain Clamshell 2 A102009 2.6M Headless Galv Plain Clamshell ½-1 A109809 2.5M Headless Galv Plain Clamshell* 1-2 A109909 2.5M Headless Galv Plain Clamshell*

* Variety pack

SENCO® 23 Ga. Headless PinsPins fasten the smallest of trim securely leaving a nearly invisible hole. BoxLength Item Code Count Head Finish Coating Package

SENCO® 21 Ga. Medium Head Pins

5⁄8 AX10EAA 5.M Medium Galv Plain Box ¾ AX11EAA 5.M Medium Galv Plain Box 1 AX13EAA 5.M Medium Galv Plain Box 1¼ AX15EAA 5.M Medium Galv Plain Box 1½ AX17EAA 5.M Medium Galv Plain Box 15⁄8 AX18EAA 5.M Medium Galv Plain Box 1¾ AX19EAA 5.M Medium Galv Plain Box 2 AX21EAAN 5.M Medium Galv Plain Box 21⁄8 AX22EAAN 5.M Medium Galv Plain Box 1 A201009 1.M Medium Galv Plain Clamshell 1¼ A201259 1.M Medium Galv Plain Clamshell 1½ A201509 0.8M Medium Galv Plain Clamshell 2 A202009 0.8M Medium Galv Plain Clamshell 5⁄8--1¼ A209809 1.2M Medium Galv Plain Clamshell* 1-2 A209909 1.2M Medium Galv Plain Clamshell* 1 AX13EAA 1.M Medium Stainless Plain Clamshell 1¼ AX15EAA 1.M Medium Stainless Plain Clamshell 1½ AX17EAA 1.M Medium Stainless Plain Clamshell 2 AX21EAAN 1.M Medium Stainless Plain Clamshell

SENCO® 18 Ga. Brad NailsCabinets, decorative trim, picture frames and ornamentals BoxLength Item Code Count Head Finish Coating Package

.0468 .0468 .0468

.0294 .0294 .0294

.0267 .0267 .0267 .0267 .0267 .0267 .0267 .0267

.0468 .0468 .0468 .0468 .0468

.0294 .0294 .0294

.0468

The 21 gauge pins o�er signi�cant holding power while leaving a much smaller indent than an 18 gauge brad. BoxLength Item Code Count Head Finish Coating Package 5⁄8 ZX10EAA 5.M Medium Galv Plain Box ¾ ZX11EAA 5.M Medium Galv Plain Box 1 ZX13EAA 5.M Medium Galv Plain Box 13⁄8 ZX16EAA 5.M Medium Galv Plain Box 15⁄8 ZX18EAA 5.M Medium Galv Plain Box 2 ZX21EAA 5.M Medium Galv Plain Box 5⁄8 ZX10EAANR 1.M Medium Galv Plain Clamshell ¾ ZX11EAANR 1.M Medium Galv Plain Clamshell 1 ZX13EAANR 1.M Medium Galv Plain Clamshell 13⁄8 ZX16EAANR 1.M Medium Galv Plain Clamshell 15⁄8 ZX18EAANR 0.8M Medium Galv Plain Clamshell 2 ZX21EAANR 0.8M Medium Galv Plain Clamshell

Finish Nails Straight Strip

FASTENERS

23 Ga. Micro Pins, Straight Strip

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

Headless Pins Straight Strip

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

Finish Nails Angled Strip

Medium Head Pins Straight Strip

16 ga. Stright Strip 16 ga 200 Angled Strip

Brad NailsHeadless & Slight Head 34°16GA

1534°

GA1115°

GA 1434°

GA 1620°

GA 30° 30°34°23 20°18GA GA

Page 29: Senco Product Catalog

HF27

.120(10d)

3_

.113 .113 .120

GE21

GE24

HE27

(6d) (10d)(8d)

3_

23/8__

2_

FP325XP, FP601, SN901XPSN951XP

FP325XP, FP601, SN901XP, SN951XP

BoxLength Item Code Count Point Finish Coating

SENCO® 34˚ Ring Shank Paper Taped Collated NailsFraming, sheathing, sub�oor, decks, trusses and pallets

BoxLength Item Code Count Point Finish Coating

SENCO® 34˚ Screw Shank Paper Taped Collated NailsFraming, sheathing, sub�oor, decks, trusses and pallets

2 x .113 GE21APAX 2.5M Diamond Bright Plain 23⁄8 x .113 GE24APBX 2.5M Diamond Bright Sencote 2 x .113 GE21ASBX 2.5M Diamond Hot Dip Sencote 23⁄8 x .113 GE24ASBX 2.5M Diamond Hot Dip Sencote 3 x .120 HE27ASBX 2.5M Diamond Hot Dip Sencote 23⁄8 x .113 GE24AGBK 1.M Diamond Stainless Sencote

3 x .120 HF27EPAK 3.1M Chisel Bright Plain 3 x .120 HF27EDB 1.M Chisel Exterior Sencote 3 x .120 HF27AGBK 1.M Diamond Stainless Sencote

BoxLength Item Code Count Point Finish Coating 2¼ x .113 GC23AHAK 1.0M Diamond Bt. Hardened Plain 2 x .113 GC21APBX 2.5M Diamond Bright Sencote 2¼ x .113 GC23APBX 2.5M Diamond Bright Sencote 23⁄8 x .113 GC24APBX 2.5M Diamond Bright Sencote 2½ x .113 GC25APBX 2.5M Diamond Bright Sencote 3 x .120 HC27APBX 2.5M Diamond Bright Sencote 3¼ x .120 HC28APBX 2.5M Diamond Bright Sencote 3 x .131 KC27APBX 2.5M Diamond Bright Sencote 3¼ x .131 KC28APBX 2.5M Diamond Bright Sencote 3½ x .131 KC29APBX 2.5M Diamond Bright Sencote 3½ x .135 LC29APBK 2.5M Diamond Bright Sencote 4 x .131 KC31APBX 2.5M Diamond Bright Sencote 2½ x .113 GC25AABX 2.5M Diamond Galv Sencote 23⁄8 x .113 GC24ASBX 2.5M Diamond Hot Dip Sencote 3 x .120 HC27ASBX 2.5M Diamond Hot Dip Sencote 3 x .131 KC27ASBX 2.5M Diamond Hot Dip Sencote 3¼ x .131 KC28ASBX 2.5M Diamond Hot Dip Sencote 3½ x .131 KC29ASBX 2.5M Diamond Hot Dip Sencote 3 x .131 KC27AGBK 1.M Diamond Stainless Sencote

Framing, sheathing, sub�oor, decks, trusses and palletsSENCO® 34˚ Smooth Shank Paper Taped Collated Nails

.131.131

.120.113.113 .113KC

28

KC27

HC27

GC21

GC23

GC25

.120

HC28

(10d)(6d).113

GC24

(8d)(7d) (8d)

(10d) (12d).131, .135

KC29

, LC2

9

(16d)(12d)

FP325XP, FP601

SN951XP

SN951XP

FP325XP, SN901XP

2_

21/4__

.113

GC23

AHAK

(7d)

21/4__

23/8__21/2__

3_

3_

31/4__ 31/4__

31/2__

.131

KC31

(16d)

4_

FP601

SN901XP

Wood to masonry hardened nail

Framing Nails Paper Taped Ring Shank

Framing Nails Paper Taped Screw Shank

55

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

Framing Nails Paper Taped Smooth Shank

54

FASTENERSFASTENERS

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA34°16GA

1534°

GA1115°

GA 1434°

GA 1620°

GA 30° 30°34°23 20°18GA GA

Page 30: Senco Product Catalog

Scan to learn moreYou can also enter this link in your web browser:

https://www.facebook.com/SencoBrands, click on Videos/Senco Fasteners

SENCO® ProHead® Smooth Paper Taped NailsFraming, sheathing, sub�oor, decks, trusses and pallets

Framing, sheathing, sub�oor, decks, trusses and pallets

BoxLength Item Code Count Point Finish Coating

3 x .120 H527APBXR 0.5M Diamond Bright Sencote

3 x .131 K527APBXR 0.5M Diamond Bright Sencote

3¼ x .131 K528APBXR 0.5M Diamond Bright Sencote

3 x .131 K527ASBXR 0.5M Diamond Hot Dip Sencote

3¼ x .131 K528ASBXR 0.5M Diamond Hot Dip Sencote

2 x .113 G521APBXN 2.5M Diamond Bright Sencote

23⁄8 x .113 G524APBXN 2.5M Diamond Bright Sencote

3 x .120 H527APBXN 2.5M Diamond Bright Sencote

2½ x .131 K525APBXN 2.5M Diamond Bright Sencote

3 x .131 K527APBXN 2.5M Diamond Bright Sencote

3¼ x .131 K528APBXN 2.5M Diamond Bright Sencote

3½ x .131 K529APBXN 2.5M Diamond Bright Sencote

2 x .113 G521ASBXN 2.5M Diamond Hot Dip Sencote

2 3⁄8 x .113 G524ASBXN 2.5M Diamond Hot Dip Sencote

3 x .120 H527ASBXN 2.5M Diamond Hot Dip Sencote

3 x .131 K527ASBXN 2.5M Diamond Hot Dip Sencote

3¼ x .131 K528ASBXN 2.5M Diamond Hot Dip Sencote

3½ x .131 K529ASBXN 2.5M Diamond Hot Dip Sencote

2 3⁄8 x .113 G624ASBXNR 0.5M Diamond Hot Dip Sencote

3 x .120 H627ASBXNR 0.5M Diamond Hot Dip Sencote

2 x .113 G621APBXN 2.5M Diamond Bright Sencote

2 3⁄8 x .113 G624APBXN 2.5M Diamond Bright Sencote

3 x .120 H627APBXN 2.5M Diamond Bright Sencote

3¼ x .131 K628APBXN 2.5M Diamond Bright Sencote

2 x .113 G621ASBXN 2.5M Diamond Hot Dip Sencote

2 3⁄8 x .113 G624ASBXN 2.5M Diamond Hot Dip Sencote

3 x .120 H627ASBXN 2.5M Diamond Hot Dip Sencote

3 x .131 K627ASBXN 2.5M Diamond Hot Dip Sencote

3¼ x .131 K628ASBXN 2.5M Diamond Hot Dip Sencote

3½ x .131 K629ASBXN 2.5M Diamond Hot Dip Sencote

BoxLength Item Code Count Point Finish Coating

SENCO® ProHead® Ring Paper Taped Nails

FP601, FP701XP, FP751XP

FP601, FP701XP, FP751XP

FP325XP, SN901XP

FP325XP, SN901XP

SN951XP

SN951XP

.113

G524

(8d).131

K525

(10d).131

K528

(12d).131

K529

(16d).120

H527

(10d)

.113

G624

(8d).120

H627

(10d)

2 3/8__

.113

G621

(6d)

2 __

3_

3_

.131

K627

(10d)

3_

23/8__

.113

G521

(2d)

2__

2½_

31/4__

31/2__

.131

K527

(10d)

3_

31/4__

.131

K628

(12d)

31/2__

.131

K629

(12d)

Note: Fits FramePro601 released 2012

FASTENERS

56

NEW SENCO’s offset full round head nail.This design allows round ProHead nails to be collated in a “nested” shank-to-shank 34̊ strip

PROHEAD®

Fastener SpecificationsDiameter ...........113" thru .131"Shank ...............Smooth & RingLength ..............2” thru 3½” (50mm-90mm)Point .................DiamondFinish ...............Bright Basic & Hot DippedCoating .............Sencote®Collation ...........30° 34° paper tape stripFeatures and Benefits

• Superior holding power. ProHead® is a uniquely engineered fastener with a robust head configuration that beats competitors’ offset full round head in head pull through testing.

• Fewer partial-drives. Sencote® is a proprietary coating that acts as a lubricant to ensure more fully completed drives.

• Less pull-outs. Sencote® is also an adhesive, scoring SENCO fasteners one of the highest withdrawal values in the industry.

• Superior strip integrity. SENCO uses processes that yield clean wire, producing nail strips that have superior tape adhesion for high humidity environments.

• Proudly manufactured in Cincinnati, Ohio.

Fits

SN901XP

SN951XP

FramePro®701XP

FramePro®751XP

FramePro®601

FramePro®325XP

57

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

Framing Nails ProHead Smooth & Ring Shank Paper Taped

Page 31: Senco Product Catalog

Full Round Head Strip Nails

.131

.131.120

.148

.131.113.113 .113

.148

KD28

KD25

KD27

HD27

GD21

GD23

GD25

MD2

3

MD2

7

.120

HD28

(10d)

.120

HJ25

*

(10d)

(10d)

(6d).113

GD24

(8d)

.148

MD2

8

(7d)

(10d)

(8d) (8d) (10d)

(12d) (12d).131

KD29

(16d)

(12d)

Roof Tile NailOversize Head

FP325FRHXP, FP602, SN902XP

FP325FRHXPSN902XP

FP325FRHXPSN902XP

FP602SN952XP

2_

21/4__

23/8__

21/2__21/2__

21/2__

3_3_

3_

31/4__

31/4__31/4__

31/2__

.162

M00

2103

(16d)

31/2__

21/4__

SN952XP

BoxLength Item Code Count Point Finish Coating

3 x .131 KD27APBSR 0.5M Diamond Bright Sencote 3¼ x .131 KD28APBSR 0.5M Diamond Bright Sencote 3 x .131 KD27ASBSR 0.5M Diamond Hot Dip Sencote 3¼ x .131 KD28ASBSR 0.5M Diamond Hot Dip Sencote 2¼ x .113 GD23AHAS 2.8M Diamond Bt. Hardened Plain 2 x .113 GD21APBSN 5.M Diamond Bright Sencote 2¼ x .148 MD23APBSN 4.M Diamond Bright Sencote 23⁄8 x .113 M002038 2.5M Diamond Bright Sencote 23⁄8 x .113 GD24APBSN 5.M Diamond Bright Sencote 2½ x .113 GD25APBSN 5.M Diamond Bright Sencote 2½ x .131 KD25APBSN 4.M Diamond Bright Sencote 2½ x .131 M002105 2.5M Diamond Bright Sencote 3 x .120 HD27APBSN 4.M Diamond Bright Sencote 3 x .131 KD27APBSN 4.M Diamond Bright Sencote 3 x .131 KD27APBSR 0.5M Diamond Bright Sencote 3 x .148 MD27APBSN 4.M Diamond Bright Sencote 3 x .148 M002102 2.M Diamond Bright Sencote 3¼ x .120 HD28APBSN 4.M Diamond Bright Sencote 3¼ x .131 KD28APBSN 4.M Diamond Bright Sencote 3¼ x .131 KD28APBSR 0.5M Diamond Bright Sencote 3¼ x .148 MD28APBSN 4.M Diamond Bright Sencote 3½ x .131 KD29APBSN 4.M Diamond Bright Sencote 3½ x .131 M002101 2.5M Diamond Bright Sencote 2½ x .113 GD25AABSN 5.M Diamond Galv Sencote 2½ x .120 HJ25ADBS* 2.3M Diamond Exterior Sencote 2½ x .131 KD25AABS 2.5M Diamond Galv Sencote 3 x .131 KD27ASBS 2.5M Diamond Hot Dip Sencote 3 x .131 KD27ASBSR 0.5M Diamond Hot Dip Sencote 3 x .131 KD27AABSN 4.M Diamond Galv Sencote 3¼ x .131 KD28ASBS 2.5M Diamond Hot Dip Sencote 3¼ x .131 KD28ASBSR 0.5M Diamond Hot Dip Sencote 3¼ x .131 KD28AABSN 4.M Diamond Galv Sencote 3½ x .131 KD29ASBS 2.5M Diamond Hot Dip Sencote 3½ x .131 KD29AABSN 4.M Diamond Galv Sencote 3¼ x .131 KD28AGBS 1.M Diamond Stainless Sencote

* Roof tile nails, drive with the FramePro®752XP or SN952XP

SENCO® 20˚ Smooth Shank Plastic Collated NailsFraming, sheathing, sub�oor, decks, trusses and pallets

59

Framing Nails Full Round Head Smooth Shank

58

FASTENERS

M00

2261

BB,

M00

2262

Gal

v.

MD1

7, M

0022

63 B

B, M

0022

64 G

alv.

MD2

5, M

0022

65 B

B, M

0022

66 G

alv.

M00

2267

BB,

M00

2268

1½_

1½_

.131 .148

2½_

.148HN250

HN150

2½_

.162

1½_ 1½_

.131 .148

2½_

.148SN60MC

KJ17

MD

17

MD

25

1½ x .131 M002261 2.M Diamond Bright Plain 34˚ Paper Tape, Strip 1½ x .148 M002263 2.M Diamond Bright Plain 34˚ Paper Tape, Strip 2½ x .148 M002265 1.5M Diamond Bright Plain 34˚ Paper Tape, Strip 2½ x .162 M002267 1.2M Diamond Bright Plain 34˚ Paper Tape, Strip 1½ x .131 M002262 2.M Diamond Hot Dip Plain 34˚ Paper Tape, Strip 1½ x .148 M002264 2.M Diamond Hot Dip Plain 34˚ Paper Tape, Strip 2½ x .148 M002266 1.5M Diamond Hot Dip Plain 34˚ Paper Tape, Strip 2½ x .162 M002268 1.2M Diamond Hot Dip Plain 34˚ Paper Tape, Strip

SENCO® 34˚ Non-Heat Treated Metal Connector NailsJoist hangers, foundation anchors, seismic and hurricane straps and ties,standard tensile, non-hardened nails. BoxLength Item Code Count Point Finish Coating Collation

1½ x .148 MD17APAT 2.M Diamond Bright Plain 20˚ Paper Tape, Strip 2½ x .148 MD25APBT 2.M Diamond Bright Plain 20˚ Paper Tape, Strip 1½ x .131 KJ17ASAT 2.M Diamond Hot Dip Plain 20˚ Paper Tape, Strip 1½ x .148 MD17ASAT 2.M Diamond Hot Dip Plain 20˚ Paper Tape, Strip 2½ x .148 MD25ASBT 2.M Diamond Hot Dip Plain 20˚ Paper Tape, Strip

SENCO® 20˚ Non-Heat Treated Metal Connector NailsJoist hangers, foundation anchors, seismic and hurricane straps and ties,standard tensile, non-hardened nails Box,Length Item Code Count Point Finish Coating Collation

KJ17

MD1

7

KJ25

, MD2

5

ND25

1½_

1½_

.131 .148

2½_

.131, .148JoistPro 250

JoistPro150

2½_

.162

1½ x .131 KJ17AHBD 2.M Diamond Bright Plain 34˚ Paper Tape, Strip 1½ x .148 MD17AHBD 2.M Diamond Bright Plain 34˚ Paper Tape, Strip 2½ x .131 KJ25AHBD 2.M Diamond Bright Plain 34˚ Paper Tape, Strip 2½ x .148 MD25AHBD 1.5M Diamond Bright Plain 34˚ Paper Tape, Strip 2½ x .162 ND25AHBD 1.2M Diamond Bright Plain 34˚ Paper Tape, Strip 1½ x .131 KJ17AEBD 2.M Diamond Hot Dip Plain 34˚ Paper Tape, Strip 1½ x .148 MD17AEBD 2.M Diamond Hot Dip Plain 34˚ Paper Tape, Strip 2½ x .131 KJ25AEBD 2.M Diamond Hot Dip Plain 34˚ Paper Tape, Strip 2½ x .148 MD25AEBD 1.5M Diamond Hot Dip Plain 34˚ Paper Tape, Strip 2½ x .162 ND25AEBD 1.2M Diamond Hot Dip Plain 34˚ Paper Tape, Strip

SENCO® 34˚ Heat Treated Metal Connector NailsJoist hangers, foundation anchors, seismic and hurricane straps and ties.

BoxLength Item Code Count Point Finish Coating Collation

Metal Connector

FASTENERS

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA34°16GA

1534°

GA1115°

GA 1434°

GA 1620°

GA 30° 30°34°23 20°18GA GA

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

Page 32: Senco Product Catalog

HL27

.120.113 .113.099

BE23

, BL2

3

GL21

GL24

SCN60XP, SCN49 PAL100

PAL130

SCN65XP

(7d).099

BL21

(6d).099

BT21

(6d) (6d) (8d) (10d)

GD24

GD25

HD27

HD28

KD27

KD28

KD29

.113.113 .120 .131 .131 .131.120

SCN60XP PAL130

SCN65XP

GD21

.113(6d) (8d) (8d) (10d) (12d) (10d)

KD25

.131(8d) (12d) (16d)

2_

23/8__

21/2__ 21/2__

3__

31/ 4__

3__

31/4__

31/2__

2_ 2_

21/4_

2_

23/8_

3_

PAL100

SCN49 SENCO® Smooth Shank Framing Coil Nails

SENCO® Ring Shank Framing Coil Nails

BoxLength Item Code Count Point Finish Coating Collation

2 x .113 GD21APBF 6.M Diamond Bright Sencote Angular, �at wire wound 23⁄8 x .113 GD24APBF 6.M Diamond Bright Sencote Angular, �at wire wound 2½ x .113 GD25APBF 6.M Diamond Bright Sencote Angular, �at wire wound 2½ x .131 KD25APBF 3.6M Diamond Bright Sencote Angular, �at wire wound 2½ x .131 M003014 2.4M Diamond Bright Sencote Angular, �at wire wound 3 x .120 HD27APBF 4.M Diamond Bright Sencote Angular, �at wire wound 3 x .131 KD27APBF 3.6M Diamond Bright Sencote Angular, �at wire wound 3 x .131 M003007 2.4M Diamond Bright Sencote Angular, �at wire wound 3¼ x .120 HD28APBF 4.M Diamond Bright Sencote Angular, �at wire wound 3¼ x .131 KD28APBF 3.6M Diamond Bright Sencote Angular, �at wire wound 3¼ x .131 M003009 2.4M Diamond Bright Sencote Angular, �at wire wound 3½ x .131 KD29APBF 3.6M Diamond Bright Sencote Angular, �at wire wound 5 x .148 MD34APBF 1.8M Diamond Bright Sencote Angular, �at wire wound 2 x .113 GD21AABF 6.M Diamond Galv Sencote Angular, �at wire wound 2½ x .113 GD25AABF 6.M Diamond Galv Sencote Angular, �at wire wound 3 x .131 KD27AABF 3.6M Diamond Galv Sencote Angular, �at wire wound 3 x .131 KD27ASBF 2.4M Diamond Hot Dip Sencote Angular, �at wire wound 3¼ x .131 KD28AABF 3.6M Diamond Galv Sencote Angular, �at wire wound 3¼ x .131 KD28ASBF 2.4M Diamond Hot Dip Sencote Angular, �at wire wound

BoxLength Item Code Count Point Finish Coating Collation

2 x .099 BL21APBF 6.6M Diamond Bright Sencote Angular, �at wire wound 2 x .099 BT21APBF 6.6M Diamond Bright Sencote Angular, �at wire wound 2 x .113 GL21APBF 6.M Diamond Bright Sencote Angular, �at wire wound 2¼ x .099 BL23APBF 6.6M Diamond Bright Sencote Angular, �at wire wound 23⁄8 x .113 GL24APBF 6.M Diamond Bright Sencote Angular, �at wire wound 2¼ x .099 BE23AABF 6.6M Diamond Galv Sencote Angular, �at wire wound 23⁄8 x .113 GL24AABF 6.M Diamond Galv Sencote Angular, �at wire wound 23⁄8 x .113 GL24ASBF 2.7M Diamond Hot Dip Sencote Angular, �at wire wound 3 x .120 HL27AABF 3.6M Diamond Galv Sencote Angular, �at wire wound 3 x .120 HL27ASBF 2.4M Diamond Hot Dip Sencote Angular, �at wire wound 23⁄8 x .113 GL24AGBF 2.7M Diamond Stainless Sencote Angular, �at wire wound 3 x .120 HL27AGBF 2.4M Diamond Stainless Sencote Angular, �at wire wound

Framing, sheathing, pallets, sub�oor, decks and trusses

Framing, sheathing, pallets, sub�oor, decks and trusses

Wire WeldCoil Nails

15˚

MD

_ 5

.148.113 .113 .120

GL21

GL24

HL27

(6d) (10d)(8d)

2_

2 3/8__

3_

FP325FRHXP, FP602, SN902XP

SN952XP

23⁄8 x .113 GL24ASBSR 0.5M Diamond Hot Dip Sencote 2 x .113 GL21APBSN 5.M Diamond Bright Sencote 23⁄8 x .113 GL24APBSN 5.M Diamond Bright Sencote 23⁄8 x .113 M002041 2.5M Diamond Bright Sencote 2 x .113 GL21ASBS 2.5M Diamond Hot Dip Sencote 23⁄8 x .113 GL24AABSN 5.M Diamond Galv Sencote 23⁄8 x .113 M002042 2.5M Diamond Galv Sencote 23⁄8 x .113 GL24ASBS 2.5M Diamond Hot Dip Sencote 3 x .120 HL27AABSN 4.M Diamond Galv Sencote 3 x .120 HL27ASBS 2.5M Diamond Hot Dip Sencote23⁄8 x .113 GL24AGBS 1.M Diamond Stainless Sencote 3 x .120 HL27AGBS 1.M Diamond Stainless Sencote

SENCO® 20˚ Ring Shank Plastic Collated NailsFraming, sheathing, sub�oor, decks, trusses, and pallets BoxLength Item Code Count Point Finish Coating

SENCO’s BT21APBF Coil Flooring Nails

Flooring Nails Full Round Head Ring Shank

2BT (.099)

Fastener Speci�cations: Full Ring Shank Coil Nail: .099" x 2¼” Item Code Diameter Wound/Shank Length Point Finish Coating Features M/Box Wt/Box BT21APBF .099 Coil, angular, �at wound 2 Diamond Bright Basic. Sencote Unique ring shank design 6.6 30.5 lbs

Framing Nails Smooth & Ring Shank

61

15°Framing Nails Full Round Head Ring Shank

60

34°16GA15

34°GA11

15°GA 14

34°GA 16

20°GA 30° 30°34°23 20°18GA GA

Superior fastening in floor applications.

• Ideal for use in SENCO’s SCN60XP nailer

• Patented unique ring shank design reduces the potential of the nail “backing out”- address one of the most common flooring problems.

• The BT21APBF has been tested and proven under actual conditions - is preferred.

• Expect to not experience squeaky floors, uneven surfaces, raised fasteners and minimize problems and call-backs.

FASTENERSFASTENERS

15°

Page 33: Senco Product Catalog

SCN40DW(4d) (5d).099

BG17

.099

BG18

15/8__

1½__

.082

.092 .092

ED19

ED21

, EJ2

1

SCN49, PAL57F

.082.082 .092.092 .092

SE19

EL20

EL23

SE17

SE15

(6d).092

ED23

, EJ2

3

(7d)

(3d) (4d) (5d)

(5d)

(6d)

EL19

(5d) (7d)

SCN49, PAL57F

13/4__

2__

21/4__

21/4__

.092

EL21

(7d)

2__

17/8__

13/4__13/4__

11/2__

11/4__

Packaging, siding, fencing, pallets and underlayment

SENCO® Ring Shank-Packaging and Siding Coil Nails

SENCO® Smooth Shank-Packaging and Siding Coil Nails

BoxLength Item Code Count Point Finish Coating Collation

1¾ x .092 ED19ASBC 3.6M Diamond Hot Dip Sencote Angular plastic carrier strip wound 2 x .092 ED21AABH 3.6M Diamond Galv Sencote Angular, �at wire wound 2 x .092 ED21ADBH 3.6M Diamond Exterior Sencote Angular, �at wire wound 2 x .092 EJ21ADBC 6.4M Diamond Exterior Sencote Angular plastic carrier strip wound 2 x .092 EJ21ADBH 7.2M Diamond Exterior Sencote Angular, �at wire wound 2¼ x .092 ED23AABH 3.6M Diamond Galv Sencote Angular, �at wire wound 2¼ x .092 ED23ADBH 3.6M Diamond Exterior Sencote Angular, �at wire wound 2¼ x .092 ED23ASBC 3.6M Diamond Hot Dip Sencote Angular plastic carrier strip wound 2¼ x .092 EJ23ADBH 7.2M Diamond Exterior Sencote Angular, conical wire wound 2¼ x .092 EJ23ASBC 3.6M Diamond Hot Dip Sencote Angular plastic carrier strip wound

BoxLength Item Code Count Point Finish Coating Collation

1½ x .099 BG17AAA 9.6M Diamond Galv Plain Angular, conical wire wound 1½ x .099 BG17AAAQ 6.4M Diamond Galv Plain Angular, conical wire wound 15⁄8 x .099 BG18AAA 9.6M Diamond Galv Plain Angular, conical wire wound 15⁄8 x .099 BG18AAAQ 6.4M Diamond Galv Plain Angular, conical wire wound

SENCO® Drywall Ring Shank Bugle Head Coil Nails

BoxLength Item Code Count Point Finish Coating Collation

1¼ x .082 SE15APB 15.M Diamond Bright Sencote Angular, conical wire wound 1¼ x .082 SE15APBH 14.M Diamond Bright Sencote Angular, �at wire wound 1½ x .082 SE17APB 12.M Diamond Bright Sencote Angular, conical wire wound 1½ x .082 SE17APBH 11.2M Diamond Bright Sencote Angular, �at wire wound 1¾ x .082 SE19APB 12.M Diamond Bright Sencote Angular, conical wire wound 1¾ x .082 SE19APBH 11.2M Diamond Bright Sencote Angular, �at wire wound 1½ x .092 EL17ADBH 9.M Diamond Exterior Sencote Angular, �at wire wound 1¾ x .092 EL19ASBC 3.6M Diamond Hot Dip Sencote Angular plastic carrier strip wound 1¾ x .092 EL19ASBH 3.6M Diamond Hot Dip Sencote Angular, �at wire wound 17⁄8 x .092 EL20AABH 3.6M Diamond Galv Sencote Angular, �at wire wound 17⁄8 x .092 EL20ASBH 3.6M Diamond Hot Dip Sencote Angular, �at wire wound 2 x .092 EL21ASBH 3.6M Diamond Hot Dip Sencote Angular, �at wire wound 2¼ x .092 EL23AABH 3.6M Diamond Galv Sencote Angular, �at wire wound 2¼ x .092 EL23ASBC 3.6M Diamond Hot Dip Sencote Angular plastic carrier strip wound 2¼ x .092 EL23ASBH 3.6M Diamond Hot Dip Sencote Angular, �at wire wound 1¾ x .092 EL19AGBH 3.6M Diamond Stainless Sencote Angular, �at wire wound 17⁄8 x .092 EL20AGBH 3.6M Diamond Stainless Sencote Angular, �at wire wound 2 x .092 EL21AGBH 3.6M Diamond Stainless Sencote Angular, �at wire wound 2¼ x .092 EL23AGBH 3.6M Diamond Stainless Sencote Angular, �at wire wound

Packaging, siding, fencing, wood shingles, crating and pallets

Packaging, Siding Smooth & Ring Shank

Drywall Nails Ring Shank

15°

15°

Framing Nails Screw, Duplex Shanks & Wood to Masonry Smooth Shank

BK25

HK27

BK23

BK21

.120.099.099 .099(6d) (7d) (8d) (10d)

PAL100PAL130

SCN49SCN60XP

SCN65XP

SCN60XPModi�ed*

2__

21/4__

21/2__

3__

HR74

*

HR22

*

.120.120(10d)(10d)

M00

3011

.099

M00

3012

.099SCN65XP

11/2__

21/4__

2 7⁄8__

2 1⁄8__

SENCO® Screw Shank Framing Coil Nails

SENCO® Duplex Smooth Shank Coil Nails

Wood to masonry

SENCO® Smooth Shank Sti� Stock Coil Nails

BoxLength Item Code Count Point Finish Coating Collation

2 x .099 BK21BPBFN 9.M Blunt Dia. Bright Sencote Angular, �at wire wound 2 x .099 BK21EPBF 6.6M Chisel Bright Sencote Angular, �at wire wound 2¼ x .099 BK23BPBFN 9.M Blunt Dia. Bright Sencote Angular, �at wire wound 2¼ x .099 BK23EPBF 6.6M Chisel Bright Sencote Angular, �at wire wound 2½ x .099 BK25BPBFN 6.M Blunt Dia. Bright Sencote Angular, �at wire wound 3 x .120 HK27APBFN 4.M Diamond Bright Sencote Angular, �at wire wound

Framing, sheathing, pallets, sub�oor, decks and trusses

BoxLength Item Code Count Point Finish Coating Collation

1½ x .099 M003011 3.M Diamond Bright Sencote Angular, �at wire wound 2¼ x .099 M003012 3.M Diamond Bright Sencote Angular, �at wire wound

Framing, trusses, crating and concrete forms BoxLength Item Code Count Point Finish Coating Collation 21⁄8 x .120 HR22APAF 5.4M Diamond Bright Plain Angular, �at wire wound27⁄8 x .120 HR74APAF 3.6M Diamond Bright Plain Angular, �at wire wound*Requires a special order modi�ed SCN60XP Tool (order XA1739)

62

15°

63

FASTENERSFASTENERS

Page 34: Senco Product Catalog

Also Fits:SENCO: SCN56, HITACHI®: NV65AH, NV75AG

Fine Wire Staples

65

B08B06

B05

Crown: 1/2 (12.7mm)Width: .030Thickness: .0215Gauge: 22

5⁄16

3⁄81⁄2

SFT10XP-B

D10

A08A06A04

Crown: 3/16 (4.8mm)Width: .030Thickness: .0215Gauge: 22

1⁄43⁄8

1⁄2

5⁄8

3⁄16 3⁄16 3⁄16

3⁄16

SFT10XP-A/D

SFT10XP-A/D

C10C08C07

C06C05C04

C03C02

SFW09

SFT10XP-C, SFW09

SFT10XP-C, SFW09

Crown: 3/8 (9.5mm)Width: .030Thickness: .0215Gauge: 22

5/32 3/16

1/4 5/16 3/8

7/16 1/25/8

½B04

1⁄4½

½ ½

3/8

3/8

3/8

3/8 3/8

3/8 3/83/8

¼ A04BAAN 10.M Chisel Galv Sencote 3⁄8 A06BABN 30.M Chisel Galv Sencote 3⁄8 A06BABP 40.M Chisel Galv Sencote ½ A08BAB 20.M Chisel Galv Sencote ½ A08BABP 30.M Chisel Galv Sencote 5⁄8 D10BABN 20.M Chisel Galv Sencote 5⁄8 D10BABPN 23.M Chisel Galv Sencote

Furniture upholstery, felt, insulation, casebacks, screening and shoes BoxLength Item Code Count Point Finish Coating

¼ B04BAAPN 25.M Chisel Galv Plain 5⁄16 B05BAAP 45.M Chisel Galv Plain 5⁄16 B05DAA 45.M Outside Chisel Galv Plain 3⁄8 B06BAAP 40.M Chisel Galv Plain ½ B08BAAP 25.M Chisel Galv Plain

SENCO® 22 Ga. 1/2" Crown Fine Wire

BoxLength Item Code Count Point Finish Coating

5⁄32 C02BAAPN 60.M Chisel Galv Plain 3⁄16 C03BAAPN 55.M Chisel Galv Plain ¼ C04BAAP 35.M Chisel Galv Plain 5⁄16 C05BAAPN 28.M Chisel Galv Plain 3⁄8 C06BAAP 50.M Chisel Galv Plain 7⁄16 C07BAAPN 40.M Chisel Galv Plain ½ C08BAAP 35.M Chisel Galv Plain 5⁄8 C10BAAP 27.M Chisel Galv Plain 3⁄16 C03BGAN 25.M Chisel Stainless Plain ¼ C04BGAN 25.M Chisel Stainless Plain 3⁄8 C06BHA 10.M Chisel Stainless* Plain 3⁄8 C06BGA 10.M Chisel Stainless Plain

SENCO® 22 Ga. 3/8" Crown Fine Wire

BoxLength Item Code Count Point Finish Coating

Furniture upholstery, felt, insulation, casebacks, screening and shoes

Furniture upholstery, felt, insulation, casebacks, screening and shoes

SENCO® 22 Ga. 3/16" Crown Fine Wire

CROWN WIDTH

LEGLENGTH

THICKNESS

W10 W11

Crown: 3/16 (4.8mm)Width: .032Thickness: .025Gauge: 21

5/83/4

3/163/16

Cabinets, casebacks, so�ts, molding & lattice

5⁄8 W10BAB 10.M Chisel Galv Sencote 3⁄4 W11BABN 10.M Chisel Galv Sencote

SENCO® 21 Ga. 3/16" Crown Fine Wire

BoxLength Item Code Count Point Finish Coating

*Stainless Steel High Tensile AISI-304

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

Plastic Carrier Strip Smooth and Ring Siding Nails

Roofing Nails Smooth Shank

64

M00

3102

M00

3103

M00

3104

M00

3105

M00

3106

M00

3101

RoofPro450 / 455XP

.120.120.120.120 .120(4d)(3d) (5d)(1d)

.120(2d)

7/8 __

1_

3/4__

11/4 __

11/2 __

13/4__

SENCO® Smooth Shank Roo�ng Coil Nails

Box Length Item Code Count Point Finish Coating Collation

¾ x .120 M003101 7.2M Diamond Galv Plain Angular, �at wire wound

7⁄8 x .120 M003102 7.2M Diamond Galv Plain Angular, �at wire wound

1 x .120 M003103 7.2M Diamond Galv Plain Angular, �at wire wound

1¼ x .120 M003104 7.2M Diamond Galv. Plain Angular, �at wire wound

1½ x .120 M003105 7.2M Diamond Galv Plain Angular, �at wire wound

1¾ x .120 M003106 7.2M Diamond Galv Plain Angular, �at wire wound

Asphalt & �berglass shingles, siding and vapor barriers

15°

2¼EL (.092)

ED (.092)2¼

Fastener Specifications: Plastic Carrier Strip Coil Nails: 1¾" – 2¼”

2EJ (.092)

2¼(.218)

(.218)(.233)

Item Code Diameter Wound/Shank/Head Length Point Finish Coating Features M/Box Wt/Box Box/Skid UPC Code ED19ASBC .092 Flat., Smooth FRH (.218) 1¾ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil 3.6 14 lbs 24 7-41474-06104-2 ED23ASBC .092 Flat., Smooth FRH (.218) 2¼ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil 3.6 17 lbs 24 7-41474-06105-9 EJ21ASBC .092 Flat., Smooth, Oversize FRH (.233) 2 Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil 3.6 15 lbs 24 7-41474-06106-6 EJ23ASBC .092 Flat., Smooth, Oversize FRH (.233) 2¼ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil 3.6 17 lbs 24 7-41474-06107-3 EL19ASBC .092 Flat., Ring, FRH (.218) 1¾ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil 3.6 14 lbs 24 7-41474-06108-0EL23ASBC .092 Flat., Ring, FRH (.218) 2¼ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil 3.6 17 lbs 24 7-41474-06109-7

ApplicationsThese nails are primarily intended for siding, fencing, light pallets, packaging and crating.

Features and Benefits• No flagging or wire fragments under the nail head results

in no rust stains or cut fingers from sharp wire• Hot-dipped galvanization provides excellent corrosion

resistance

Works best with SCN491¼" - 2½" Coil Nailer Item#: 5J0001N See page 23 for tool specifications

SENCO’s hot-dipped, full round head, plastic carrier strip coil siding nails eliminate the wire flagging that may occur with wire collated siding nails. By using Plastic Carrier Strip Nails you eliminate wire flagging, improve the overall appearance of your work, reduce the risk of rust, stains and improve the application of paints and sealants. Our hot-dipped galvanization meets or exceeds ASTM A153 Class D, the accepted and code-specified standard for hot-dipped galvanization. These nails may be used with pressure treated lumber, including ACQ.

SENCO has a complete line of tools, fasteners, and compressors for all your roofing applications.

15°

FASTENERSFASTENERS

Page 35: Senco Product Catalog

K13K12K11K10K08SLS20XP-K

SLS20XP-RSLS20XP-HF

Crown: 3/16 (5mm)Width: .045Thickness: .030Gauge: 19

1/2

1/2

5/83/4

7/8

3⁄16 3⁄16 3⁄16

1

¼ ¼ ¼ ¼ ¼

¼ ¼ ¼ ¼ ¼

¼ ¼ ¼ ¼ ¼

R10 R11 R13

5/83/4

1

SLS18Mg, SLS20XP-L SLS25XP-L

SKSXP-LSLS150Mg

FinishPro 2N1

L11L08L06 L10L07

3/87/16

1/2 5/83/4

L17L15L14L13L12

7/8

111/8

11/4

11/2

Crown: 1/4 (6.4mm)Width: .050Thickness: .044Gauge: 18

SKSXP-L, SLS150Mg, SLS18Mg, SLS20XP-L, SLS25XP-L

3⁄16

R08

Crown: ¼ (6.4mm)Width: .045Thickness: .030Gauge: 19

FinishPro 2N1

SENCO® 19 Ga. 1/4" Crown Medium Wire

BoxLength Item Code Count Point Finish Coating

Cabinets, drawers, so�ts, lattice, casebacks

SENCO® 18 Ga. 1/4" Crown Medium Wire

BoxLength Item Code Count Point Finish Coating Package ¾ L11BRB 5.M Chisel Bright Sencote Box 1 L13BRBN 5.M Chisel Bright Sencote Box 1 L13BRBP 5.M Chisel Bright Sencote Box 11⁄8 L14BRB 5.M Chisel Bright Sencote Box 1¼ L15BRB 5.M Chisel Bright Sencote Box 3⁄8 L06BAB 10.M Chisel Galv Sencote Box 7⁄16 L07BABP 24.M Chisel Galv Sencote Box 7⁄16 L07BQBP 24.M Chisel Class1 Galv Sencote Box ½ L08BABN 5.M Chisel Galv Sencote Box ½ L08BAB 10.M Chisel Galv Sencote Box 5⁄8 L10BABN 5.M Chisel Galv Sencote Box 5⁄8 L10HABN 5.M Cross Cut Chisel Galv Sencote Box ¾ L11BAB 5.M Chisel Galv Sencote Box ¾ L11HBB 5.M Cross Cut Chisel Galv* Sencote Box ¾ L11HAB 5.M Cross Cut Chisel Galv Sencote Box 7⁄8 L12BAB 5.M Chisel Galv Sencote Box 7⁄8 L12BQB 5.M Chisel Class1 Galv Sencote Box 1 L13BABN 5.M Chisel Galv Sencote Box 1 L13HABN 5.M Cross Cut Chisel Galv Sencote Box 11⁄8 L14BAB 5.M Chisel Galv Sencote Box 1¼ L15BAB 5.M Chisel Galv Sencote Box 1½ L17BAB 5.M Chisel Galv Sencote Box 5⁄8 A800629 1.2M Chisel Galv Sencote Clamshell ¾ A800759 .9M Chisel Galv Sencote Clamshell 1 A801009 .9M Chisel Galv Sencote Clamshell 1¼ A801259 .7M Chisel Galv Sencote Clamshell 1½ A801509 .6M Chisel Galv Sencote Clamshell Variety A809909 .9M Chisel Galv Sencote ClamshellThe A809909 variety packs contain 900 assorted 1/2”, 1” and 1-1/2” 18 gauge 1/4” crown staples. 5⁄8 L10BHA 5.M Chisel Stainless** Plain Box ¾ L11BGA 5.M Chisel Stainless Plain Box 11⁄8 L14BGA 5.M Chisel Stainless Plain Box

Cabinets,casebacks, drawers, upholstery, so�ts, underlayment, lattice & insulative sheathing

SENCO® 19 Ga. 3/16" Crown Medium Wire

BoxLength Item Code Count Point Finish Coating

Hardwood �ooring, cabinets, drawers, lattice

½ R08BAB 5.M Blunt Galv Sencote 5⁄8 R10BAB 5.M Blunt Galv Sencote ¾ R11BAB 5.M Blunt Galv Sencote 1 R13BAB 5.M Blunt Galv Sencote

½ K08BABN 10.M Chisel Galv Sencote 5⁄8 K10BABN 10.M Chisel Galv Sencote ¾ K11BAB 10.M Chisel Galv Sencote 7⁄8 K12BAB 5.M Chisel Galv Sencote 1 K13BABN 5.M Chisel Galv Sencote

* Galv High Tensile**Stainless High Tensile AISI-304

Medium Wire Staples

67

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

Fine Wire Staples

66

F04

F05 F06 F08

SFT10XP-F

DFPXP Self-Clinching

1/4

5/16 3/81/2Crown: 1/2 (12.7mm)

Width: .050Thickness: .019Gauge: 20

G10G08G06G04

SFT10XP-G

Crown: 3/8 (9.5mm)Width: .045Thickness: .023Gauge: 20

1/4

5/8

3/8

3/8 3/8 3/8 3/8

1/2

H06

SFT10-HA11

Crown: 7/16 (11mm)Width: .050Thickness: .019Gauge: 20

3/8

J06 J08 J10

F75SXP, F75LXP

Crown: 7/16 (11mm)Width: .075Thickness: .023Gauge: 18

3/81/2

5/8

½

½ ½ ½

7/16

7/16 7/16 7/16

Insulation, vapor barriers & roo�ng felt

Upholstery, felt, insulation and casebacks, D Tool: Bedding, packaging and set-up boxes

Upholstery, felt, insulation and casebacks

Packaging, joining materials to corrugated

¼ F04BAAN 10.M Chisel Galv Plain ¼ F04BAAP 17.M Chisel Galv Plain 5⁄16 F05BAAP 24.M Chisel Galv Plain 3⁄8 F06BAA 10.M Chisel Galv Plain 3⁄8 F06BAAP 24.M Chisel Galv Plain ½ F08BAAN 10.M Chisel Galv Plain ½ F08BAAP 15.M Chisel Galv Plain 3⁄8 F06BGA 10.M Chisel Stainless Plain ½ F08BGA 10.M Chisel Stainless Plain

SENCO® 20 Ga. 1/2" Crown Fine Wire

BoxLength Item Code Count Point Finish Coating

¼ G04BAAN 10.M Chisel Galv Plain 3⁄8 G06BABN 5.M Chisel Galv Plain ½ G08BAB 5.M Chisel Galv Plain 5⁄8 G10BAB 5.M Chisel Galv Plain 3⁄8 G06FHA 5.M Divergent Stainless* Plain

SENCO® 20 Ga. 3/8" Crown Fine Wire

BoxLength Item Code Count Point Finish Coating

3⁄8 J06BAA 5.M Chisel Galv Plain ½ J08BAAN 5.M Chisel Galv Plain 5⁄8 J10BAAN 5.M Chisel Galv Plain

SENCO® 18 Ga. 7/16" Crown Fine Wire

BoxLength Item Code Count Point Finish Coating

3⁄8 H06BAA 5.M Chisel Galv Plain

SENCO® 20 Ga. 7/16" Crown Fine Wire

BoxLength Item Code Count Point Finish Coating

3⁄163⁄163⁄16

E10E08E06

SFT10XP-E

3/81/2

5/8Crown: 3/16 (4.8mm)Width: .050Thickness: .019Gauge: 20

3⁄8 E06BAA 10.M Chisel Galv Plain ½ E08BAA 10.M Chisel Galv Plain 5⁄8 E10BAA 5.M Chisel Galv Plain

SENCO® 20 Ga. 3/16" Crown Fine WireFurniture upholstery, felt, insulation, casebacks, screening and shoes BoxLength Item Code Count Point Finish Coating

*Stainless Steel High Tensile AISI-304

FASTENERS

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

FASTENERS

Page 36: Senco Product Catalog

15/813/4

2

N21N19N18

5/83/4

7/8

111/8

11/4

N14N13N12N11N10

Crown: 7⁄16 (11.1mm)Width: .062Thickness: .055Gauge: 16

SNS41, SNS200XP, SNS200XP-BST

SNS41, SNS200XP, SNS200XP-BST

SKSXP-N

SKSXP-N

7⁄16 7⁄16 7⁄16 7⁄16 7⁄16

N08

7⁄16

N15

7⁄16 7⁄167⁄167⁄16

13/8

11/2

1/2

N17N16

7⁄16

11/2

M004064

1⁄2

7⁄16

16 Gauge 1/2” Crown staple �ts:Paslode: Cordless 16 Gauge Standard Crown Stapler, Impulse 200-S16, 3150-S16, 3200-S16, 3200-S16P, 3200-S16, MA-S16L, S200-S16, PA-200, DeWalt: D51431Fasco: R3C HD-40 VIL-SID, Spotnails: MS76-86501, XS76-8650,

SENCO® 16 Ga. 7/16" Crown Heavy Wire

BoxLength Item Code Count Point Finish Coating Collation ¾ N11BRB 5.M Chisel Bright Sencote Glued 1 N13BRB 5.M Chisel Bright Sencote Tape 11⁄8 N14BRB 10.M Chisel Bright Sencote Tape 1¼ N15BRB 10.M Chisel Bright Sencote Tape 13⁄8 N16BRB 10.M Chisel Bright Sencote Tape 13⁄8 N16RRB 10.M Step Bright Sencote Tape 1½ N17BRB 10.M Chisel Bright Sencote Tape 15⁄8 N18BRB 10.M Chisel Bright Sencote Tape 1¾ N19BRB 10.M Chisel Bright Sencote Tape 2 N21BRB 10.M Chisel Bright Sencote Tape ½ N08BABN 5.M Chisel Class1 Galv Sencote Tape ½ N08BBBN 5.M Chisel Galv* Sencote Glued ½ N08FBB 5.M Divergent Galv* Sencote Glued 5⁄8 N10BAB 5.M Chisel Class1 Galv Sencote Glued ¾ N11BAB 5.M Chisel Class1 Galv Sencote Glued ¾ N11FBB 5.M Divergent Galv* Sencote Glued 7⁄8 N12BABN 5.M Chisel Class1 Galv Sencote Glued 7⁄8 N12FABN 5.M Divergent Class1 Galv Sencote Glued 1 N13BAB 5.M Chisel Class1 Galv Sencote Glued 1 N13FAB 5.M Divergent Class1 Galv Sencote Glued 11⁄8 N14BAB 10.M Chisel Class1 Galv Sencote Tape 11⁄8 N14FAB 10.M Divergent Class1 Galv Sencote Glued 1¼ N15BAB 10.M Chisel Class1 Galv Sencote Tape 1¼ N15FAB 10.M Divergent Class1 Galv Sencote Glued 13⁄8 N16BAB 10.M Chisel Class1 Galv Sencote Tape 1½ N17BAB 10.M Chisel Class1 Galv Sencote Tape 1½ N17BPE 10.M Chisel Reg. Galv Sencote Tape 15⁄8 N18BAB 10.M Chisel Class1 Galv Sencote Glued 1¾ N19BAB 10.M Chisel Class1 Galv Sencote Tape 1¾ N19BPE 10.M Chisel Reg. Galv Sencote Glued 2 N21BAB 10.M Chisel Class1 Galv Sencote Tape 2 N21BPE 10.M Chisel Reg. Galv Sencote Glued 1¼ N15BGB 3.M Chisel Stainless Sencote Glued 1½ N17BGB 3.M Chisel Stainless Sencote Glued 1¾ N19BGBN 3.M Chisel Stainless Sencote Glued 2 N21BGBN 3.M Chisel Stainless Sencote Glued

Cabinets, casebacks, drawers, upholstery, so�ts, underlayment, lattice and sheathing

Note:

CROWN WIDTH

LEGLENGTH

THICKNESS

* Galv High tensileNote: Class1 Galv. �nish is required to meet most building code requirements.

Model numbers specify which tool or tools drive designated fasteners.

SENCO® 16 Ga. 1/2" Crown Heavy Wire BoxLength Item Code Count Point Finish Coating Collation 1½ M004064 10.M Chisel Reg. Galv Sencote Tape

M17M15M13M12

M11M10M08M06

SKSXP-M

SKSXP-MSLS20XP-M / SLS25XP-M

SLS20XP-M / SLS25XP-M

5/83/4

7/8

1

11/4

11/2

Crown: 3/8 (9.5mm)Width: .050Thickness: .044Gauge: 18

3/81/2

3⁄8 3⁄8 3⁄8 3⁄8

3⁄8 3⁄8 3⁄8 3⁄8

SENCO® 18 Ga. 3/8" Crown Medium Wire

BoxLength Item Code Count Point Finish Coating 5⁄8 M10BRBN 5.M Chisel Bright Sencote ¾ M11BRBN 5.M Chisel Bright Sencote 1 M13BRB 5.M Chisel Bright Sencote 3⁄8 M06BABN 10.M Chisel Galv Sencote ½ M08BAB 10.M Chisel Galv Sencote 5⁄8 M10BABN 5.M Chisel Galv Sencote ¾ M11BABN 5.M Chisel Galv Sencote 7⁄8 M12BAB 5.M Chisel Galv Sencote 1 M13BAB 5.M Chisel Galv Sencote 1¼ M15BAB 10.M Chisel Galv Sencote 1½ M17BAB 10.M Chisel Galv Sencote

Cabinets, casebacks, drawers, upholstery, so�ts, underlayment, lattice and sheathing

13/8

15/8

O18O16

Crown: 7⁄16 (11.1mm)Width: .058Thickness: .050Gauge: 17

11/4

O15

7⁄16 7⁄16

13/4

O19

7⁄16

11/2

O17

7⁄167⁄16

SENCO® 17 Ga. 7/16" Crown Heavy WireFurniture frames and crates BoxLength Item Code Count Point Finish Coating Collation 1¼ O15BRBB 10.M Chisel Bright Sencote Glued 13⁄8 O16BRBB 10.M Chisel Bright Sencote Glued 1½ O17BRBB 10.M Chisel Bright Sencote Glued 15⁄8 O18BRBB 10.M Chisel Bright Sencote Glued 13⁄4 O19BRBB 10.M Chisel Bright Sencote Glued

SNS200XP, SNS200-XP-BSTSNS41*, SNS44XP*, SNS45XP*

* Drives only from SNS44XP and SNS45XP staplers manufactured after 05/2010, and SNS41 manufactured after 09/2010. For older tools, order upgrade kits: SNS41-YK0794, SNS44-YK0793, SNS45-FA0186

Heavy Wire Staples

69

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

Medium Wire Staples

68

Heavy Wire Staples

FASTENERS

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

FASTENERS

Page 37: Senco Product Catalog

SHFS200

SHF200, SHF50, SHF15

SLSXP-HF

.063

GT40CPSCP40XP

11/2__

13/4__

2_

1⁄2

5/83/4

2

1

3⁄16

1½ FL17BAB 5.2M Chisel Galv. Sencote® 13⁄4 FL19BAB 5.2M Chisel Galv. Sencote® 2" FL21BAB 5.2M Chisel Galv. Sencote®

SENCO® 15.5 Ga. ½" Crown Flooring StaplesInstallation of ½" - ¾

Length Item Code Box Count Point Finish Coating

1½ x .063 RW17BPE 1.M Blunt Diamond Bright Straight Glued, strip 13⁄4 x .063 RW19BPE 1.M Blunt Diamond Bright Straight Glued, strip 2 x .063 RW21BPE 1.M Blunt Diamond Bright Straight Glued, strip 2 x .063 RW21BGE 1.M Blunt Diamond Stainless Straight Glued, strip

SENCO® 16 Ga. L Head Flooring Cleat NailsInstallation of ½" - 33⁄32" hardwood �ooring

Length Item Code Box Count Point Finish Collation

Length x Shank Item Code Box Count Head Diam Shank Style Finish Collation ½” x .109/118“ W3050YXS 1.M .250” Smooth/Step Zinc Plated Standard Washer Style ¾“ x .109” W3075PXC 1.M .250” Smooth Black Oxide Standard Washer Style ¾” x .109” W3075YXC 1.M .250” Smooth Zinc Plated Standard Washer Style 1“ x .109” W3100YXC 1.M .250” Smooth Zinc Plated Standard Washer Style 1¼” x .109” W3125YXC 1.M .250” Smooth Zinc Plated Standard Washer Style

SENCO® Concrete and Steel Collated PinsFastening drywall track, wood furring, hat channel, metal washers, ceiling grid to concrete, concrete block and steel .

X04 X06 X08

SC2

3/8__1/2__

1/4__

Y05 Y07 Y09

Crown: 7/16 (11mm)Thickness: .020Gauge: 25

5/16__7/16__

9/16__

Crown: 1" (25mm)Thickness: .020Gauge: 25 SC1XP

1 1 1

7/167/167/16

1 x 1/4 X04NRA 8.M Sharp Chisel Bright Plain 1 x 3/8 X06NRA 5.M Sharp Chisel Bright Plain 1 x 1/2 X08NRA 4.M Sharp Chisel Bright Plain

SENCO® Sencor® 25 Ga. Corrugated FastenerButt and miter jointsCrown x Length Item Code Box Count Point Finish Coating

7/16 x 5/16 Y05BFA 3.M Chisel Bright Plain 7/16 x 7/16 Y07BFA 3.M Chisel Bright Plain 7/16 x 9/16 Y09BFA 3.M Chisel Bright Plain

SENCO® Senclamp® 25 Ga. Joint FastenerButt and miter joints

1

.109/.118 .109 .109 .109

¾

½

For A36 Steel ½” W3050YXS Zinc Plated

For Concrete and Masonry ¾“ W3075PXC Black Oxide ¾” W3075YXC Zinc Plated 1“ W3100YXC Zinc Plated 1¼” W3125YXC Zinc Plated1000 pins per pack, standard washer style.

Crown x Length Item Code Box Count Point Finish Coating

SENCO® 19 Ga. 3/16" CrownSLS20XP-HF Hardwood �ooring Staples

5⁄8 R10BAB 5.M Blunt Galv Sencote ¾ R11BAB 5.M Blunt Galv Sencote 1 R13BAB 5.M Blunt Galv Sencote

BoxLength Item Code Count Point Finish Coating

For ¼", 5/16", and 3/8" thick solid hardwood and hardwood laminate �oors.

P15P13P12

P11P10P08

WC150XP, WC150RXP PW

* WC150XP PW

MWXP WC150XP, WC150RXP

MWXP

PW* WC150XP

MWXP, PW, WC150XP, WC150RXP, WC200XP

WC200XP

5/83/4

1/2

P06

3/8

7/8

1

11/4

P17 P19 P21

11/2

13/4

2

Crown: 1 (25.4mm)Width: .062Thickness: .055Gauge: 16

Q25Q23Q21Q19Q17Q15

SQS55XP

Crown: 7/16 (11.1mm)Width: .074Thickness: .067Gauge: 15

1

1 1 1

1 1 1

1 1 1

11/4

11/2

13/4

2

21/4

21/2

7/16 7/167/16 7/16 7/16 7/16

* WC150XP Short Staples – Order block-out kit YK0786 to drive staples under ¾”

3⁄8 P06BAA 10.M Chisel Class1 Galv Plain Glued ½ P08BABT 10.M Chisel Class1 Galv Sencote Glued 5⁄8 P10BAB 10.M Chisel Class1 Galv Sencote Glued 5⁄8 P10FAB 10.M Divergent Class1 Galv Sencote Glued 5⁄8 P10BPE 10.M Chisel Reg. Galv Coated Glued ¾ P11BAB 10.M Chisel Class1 Galv Sencote Glued ¾ P11BPE 10.M Chisel Reg. Galv Coated Glued 7⁄8 P12BAB 10.M Chisel Class1 Galv Sencote Glued 1 P13BAB 10.M Chisel Class1 Galv Sencote Glued 1 P13BPE 10.M Chisel Reg. Galv Sencote Glued 1¼ P15BAB 10.M Chisel Class1 Galv Sencote Taped 1¼ P15BRE 10.M Chisel Reg. Galv Sencote Taped 1¼ P15BPE 10.M Chisel Reg. Galv Coated Glued 1½ P17BAB 10.M Chisel Class1 Galv Sencote Taped 1¾ P19BAB 5.M Chisel Class1 Galv Sencote Taped 2 P21BAB 5.M Chisel Class1 Galv Sencote Taped 2 P21BPE 5.M Chisel Reg. Galv Coated Glued 1 P13BGBN 5.M Outside Chisel Stainless Sencote Taped

SENCO® 16 Ga. 1" Crown Heavy Wire

BoxLength Item Code Count Point Finish Coating Collation

Sheathing, house wrap, composite roo�ng, roo�ng felt, corrugated containers, foam insulation board,furniture/cabinet frames and butt-joints

SENCO® 15 Ga. 7/16" Crown Heavy Wire

BoxLength Item Code Count Point Finish Coating Collation

Framing, sheathing, sub�ooring, decking, lathing, door & window units, fencing, pallets, crate and box assembly, furring and furniture framing

1½ Q17BRB 5.M Chisel Bright Sencote Taped 1¾ Q19BRB 5.M Chisel Bright Sencote Taped 2 Q21BRB 5.M Chisel Bright Sencote Taped 2¼ Q23BRB 5.M Chisel Bright Sencote Taped 2½ Q25BRB 5.M Chisel Bright Sencote Taped 1¼ Q15BAB 5.M Chisel Class1 Galv Sencote Taped 1½ Q17BAB 5.M Chisel Class1 Galv Sencote Taped 1¾ Q19BAB 5.M Chisel Class1 Galv Sencote Taped 2 Q21BAB 5.M Chisel Class1 Galv Sencote Taped 2¼ Q23BAB 5.M Chisel Class1 Galv Sencote Taped 2½ Q25BAB 5.M Chisel Class1 Galv Sencote Taped 1¾ Q19BGBN 2.2M Chisel Stainless Sencote Taped 2½ Q25BGBN 1.M Chisel Stainless Sencote Taped

Note: Class1 Galv. �nish is required to meet most building code requirements.

Note: Class1 Galv. �nish is required to meet most building code requirements.

SCP40XP drives pins form 1/2" to 1-1/2"

71

Corrugated Fasteners

SPECIALTY FASTENERSFlooring Cleats and Staples

Concrete and Steel Pins

Heavy Wire Staples

70

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

16GA 15GA 11GA22 18GA19GA 17GAGA 21GA 20GA25GA

See page 72 for specfications on magnetic nosepiece for attaching 1-1/4" galvanized metal washers (must be purchased separately)

FASTENERS

SHF200 Cleats Nailer

SHFS200 Stapler SLSXP-HF Stapler

Page 38: Senco Product Catalog

10 M 075 Y K F T 4 X

#10" 3/4" Yellow Zinc Box 1M Flat Pan Fine 22 TPI T4 Rex

3rd Digit: Application/FeaturesExample of 12-Digit Code10M075YKFT4X:

1-2 3 4-6 7 8 9 10 11 12

1-2 Digits 3 Digit 4-6 Digits 7 Digit 8 Digit 9 Digit 10 Digit 11 Digit 12 DigitDiameter Application Length Coating/Finish Carton Count Head Type Thread Point Drive Type

06 #6 A Drywall to Wood 044 7/16" 11mm C Clear Zinc B Bulk A Round Washer C Coarse 3 T3 P Phillips

07 #7 B Drywall to Lt. Ga. Steel 050 1/2" 12mm P Phosphate K Box B Bugle Head D Double 4 T4 S Square

08 #8 C Drywall to Heavy. Ga. Steel 062 5/8” 16mm S Stainless Steel T Tub C Composite Deck E Fine 18 TPI 5 T5 X Rex

09 #9 D Decking – Wood to Wood 075 3/4" 19mm W Exterior L Loose F Flat Pan F Fine A Wing T3

10 #10 F Flooring – Plywood to Wood 087 7/8" 22mm Y Yellow Zinc H Hex H Hi-Lo B Wing T4

12 #12 G Sheathing to Steel 100 1" 25mm L Flat T Fine 22 TPI C Wing T5

14 #14 L Flooring (Novadeck) 125 1-1/4" 32mm N Reduced Wafer D Drill

M Metal to Metal 150 1-1/2" 38mm M Mod. Flat Pan N Spoon

Q Underlayment 162 1-5/8" 41mm P Pan P Pilot

R Composite Decking-Trim Hd 175 1-3/4" 44mm R Reduced Mod. Truss S Sharp

S Composite Deck-Cup Hd 200 2" 50mm T Trim T Type 17

T Cement Board 250 2-1/2" 65mm W Wafer Head W Wing

X Specialty 300 3" 75mm

10 Digit Painted Composite Deck Screws Coding1-2 Digits 3 Digit 4-6 Digits 7 Digit 8-10 Digits Diameter Application Length Coating/Finish Painted screws only Carton Count Head Type Thread Point Drive Type

08 #8 S Composite Deck-Cup Head 250 2-1/2" 65mm W Exteriors 003 Gray 800 Tub Composite Deck 1/2 Coarse Sharp Square

300 3" 75mm 316 SS316

497 Brown

592 Tan

596 Red

Head Type Point Drive Thread Finish

Wood Bugle Sharp Phillips Coarse Grey PhosphateLight Steel Bugle Sharp Phillips Double Thread Grey PhosphateHeavy Steel Bugle Drill Phillips Fine Clear Zinc/ExteriorHeavy Steel Bugle Drill Phillips Fine Clear Zinc/ExteriorWood Flat Sharp/ Type 17 Square Coarse or ¾ Coarse Yellow ZincWood Trim Head + nibs Sharp Square High Low Yellow ZincInterior Flat Sharp Square Coarse or ¾ Coarse Yellow ZincExterior Flat Type 17 Square ¾ Coarse Stainless/ExteriorWood Flat Sharp / Type 17 Square Coarse or ¾ Coarse Clear/ Yellow ZincLight Steel Flat Sharp Square Double Thread Clear ZincHeavy Steel Flat/Wafer/Wafer+Nibs/Reduced Wafer Drill/Pilot/Wing Drill Square/Phillips/Rex Fine Clear / Yellow Zinc or ExteriorWood Flat Type 17 Square ¾ Coarse Stainless/ExteriorComposite Cupped Pan or Trim Sharp/ Type 17 Square ½ or ¾ Coarse Colored ExteriorWood Flat Type 17 Square Coarse Clear ZincWood Trim Head+Nibs Sharp Phillips/Square High Low Grey PhosphateWood Wafer + Nibs Spoon Square High Low ExteriorSteel Wafer + Nibs Drill Square Fine ExteriorLight Gauge Metal Framing Pan/Reduce Mod Truss Sharp/Drill Phillips Fine / Double Grey Phosphate / Clear ZincHeavy Gauge Metal Flat Pan/Mod Flat Pan/Reduced Wafer Drill Square/Phillips/Rex Fine / 22 TPI Clear / Yellow ZincNon Countersinking/Applications Round Washer Drill / Type 17 Square Coarse / Double Clear ZincWood Trim Head+Nibs Sharp PhillipsSquare High Low Grey Phosphate

Mat

eria

l or

App

licat

ions Interior Drywall

Exterior Drywall/Gypsum SheathingSubflooring-Wood

Subflooring-Engineered Lumber

Wood Framing

Sheathing

Decking

Wood FlooringCrating & Pallets

Cement Board

Metal Framing

General PurposeUnderlayment

When Fastening to/Application

Profiles & Features for Fasteners by Application

SCREW IDENTIFICATION

12-digit Screw Coding

73

SENCO® AUTO-FEED SCREWS

72

SPECIALTY FASTENERSBuilding Wrap & Felt Fastening System

5⁄8__

1

Crown: 1⁄2 (12.7mm)Gauge: 21

½

1”

M004092 1" Button Cap & ½" Crown 21 Ga. StapleHouse wrap and roof felt installation Box Item# Fastener Crown x Length Count Point Finish Collation Fits

M004092 Staple 1/2”x 5/8” 2.2M Chisel Galv Glued strip BC58

Button Cap 1” Button Plastic Laser weld stack

• Fits BC58 Buton Cap Stapler System, 2200 caps and staples per box. Drives staple and 1” plastic button cap in tandem saving time and money when installing felt paper and house wrap.

Features:

Plaster, Stucco & Building Wrap Fastening Systems

Senco galvanized metal washers are ideal for installation and repair of plaster and stucco. Washers are designed for use with screws or concrete pins.

• Reduce install time by using collated screws or pins

TyRex DCF5000 1¼” NPC021

TyRex TY5100

Auto-feed Screw SystemsFits Tools Range Item#SENCO DS275-18v 1¼” NPC030SENCO DS300-AC

Concrete Pinners Fits Tools Range Item#GT40CP 1¼” NPC035SCP40XP

Auto-feed Screw SystemsFits Tools Range Item#SENCO DS275-18v 1¾” NPC029SENCO DS300-AC

TyRex DCF5000 1¾” NPC028

TyRex TY5100

Box FitsItem# Diameter Count Screw SeriesSWM125A 1¼” 1M 06A, 06B, 06C, 07A

Box FitsItem# Diameter Count GT40CP, SCP40XP pinsSWM125B 1¼” 1M .109” Dia. Concrete Pins

Box FitsItem# Diameter Count Screw SeriesSWM175A 1¾” 1M 06A, 06B, 06C, 07A (forms seal around screw)

Galvanized Metal Washer

Plastic Washer Plastic washers are designed to secure building wrap products and felt paper to the exterior of buildings. We offer screws for steel or wood studs.

• Simple snap-in washer holders available for selected Senco & TyRex auto-feed screw systems and SCP40XP pneumatic or GT40CP gas concrete pinners.

• Fasteners available for wood, steel, concrete, and block substrates.

Metal Washer Nose Pieces

Plastic Washer Nose Pieces

Metal & Plastic Washers Nose Pieces for Washer

Magnetic washer nose piece

Page 39: Senco Product Catalog

Wood to Heavy Steel Wood to Heavy Steel (continued)

Item Code Gauge Length Thread Finish Qty08G200CKLFPS #8 2” Fine Clear Zinc 1000 Box

Item Code Gauge Length Thread Finish Qty08G162CTWFWS #8 1 5/8” Fine Clear Zinc 1000 Tub10G162CTWFWS #10 1 5/8” Fine Clear Zinc 1000 Tub08G200CTWFWS #8 2” Fine Clear Zinc 1000 Tub08G250CTWFWS #8 2 1/2” Fine Clear Zinc 800 Tub08G300CTWFWS #8 3” Fine Clear Zinc 800 Tub

Item Code Gauge Length Thread Finish Qty08G200WTWFWS #8 2” Fine Exterior 1000 Tub

Item Code Gauge Length Thread Finish Qty08G100CKNFDP #8 1” Fine Clear Zinc 1000 Box

Item Code Gauge Length Thread Finish Qty10G125CBWFDS #10 1 1/4” Fine Clear Zinc 4000 Box

Item Code Gauge Length Thread Finish Qty12G175YKLFAX #12 1 3/4” Fine Yellow Zinc 1000 Box

Item Code Gauge Length Thread Finish Qty12G200YKLFCX #12 2” Fine Yellow Zinc 1000 Box12G250YKLFCX #12 2 1/2” Fine Yellow Zinc 1000 Box

APPLICATIONS AND FEATURESPilot point screw designed for use in sheathing to heavy steel.

APPLICATIONS AND FEATURESUp to 7/16" thick, wing drill point screws designed for use in sheathing to steel members.

APPLICATIONS AND FEATURESUp to 1/2" thick, wing drill point screws designed for use in sheathing to steel members.

APPLICATIONS AND FEATURESDrill point screw designed for sheathing to heavy steel.

APPLICATIONS AND FEATURESWing Drill point screws designed for use in sheathing to heavy steel.

APPLICATIONS AND FEATURESLow profile head ideal for sheathing to steel studs where sheathing density or finish requirements restrict deep countersinking of the fastener.

#2 Square Flat Pilot

#2 Square Wafer + nibs Wing drill

Reducedwafer

Drill#2 Phillips

#2 Square DrillWafer

FlatRex Wing T3 drill

FlatRex Wing T5 drill

Wood to Light Steel

Item Code Gauge Length Thread Finish Qty08G150CTLDSS #8 1 1/2” Double Clear Zinc 1000 Tub

APPLICATIONS AND FEATURESSharp point wood screw designed for use in sheathing to metal applications.

#2 Square Flat Sharp

Fastener Applications

Fastener Finishes

DRYWALL/ GYPSUM SHEATHING COMPOSITEDECKING

SHEATHING (SUBFLOOR,UNDERLAYMENT,CEMENT BOARD) SPECIALTY DECKING

METAL TOMETAL

Exterior/Brown Exterior/Red Exterior/TanExterior/Gray

Stainless 304 Zinc, Yellow Zinc, Clear

Exterior

Gray Phosphate

Drywall to Wood

Drywall to Light Steel

Drywall to Heavy Steel

Item Code Gauge Length Thread Finish Qty06A125P #6 1 1/4” Coarse Gray Phosphate 1000 Tub06A125PB #6 1 1/4” Coarse Gray Phosphate 4000 Box06A162P #6 1 5/8” Coarse Gray Phosphate 1000 Tub06A162PB #6 1 5/8” Coarse Gray Phosphate 4000 Box07A200P #7 2” Coarse Gray Phosphate 1000 Tub08A250PK #8 2 1/2” Coarse Gray Phosphate 1000 Box

Item Code Gauge Length Thread Finish Qty06A162W #6 1 5/8” Coarse Exterior 1000 Tub

Item Code Gauge Length Thread Finish Qty06B125P #6 1 1/4” Double Thread Gray Phosphate 1000 Tub06B125PB #6 1 1/4” Double Thread Gray Phosphate 4000 Box06B162P #6 1 5/8” Double Thread Gray Phosphate 1000 Tub

Item Code Gauge Length Thread Finish Qty06C100C #6 1” Fine Clear Zinc 1000 Tub06C125C #6 1 1/4” Fine Clear Zinc 1000 Tub06C125CB #6 1 1/4” Fine Clear Zinc 4000 Box06C162C #6 1 5/8” Fine Clear Zinc 1000 Tub06C162CB #6 1 5/8” Fine Clear Zinc 4000 Box06C200C #6 2” Fine Clear Zinc 1000 Tub

Item Code Gauge Length Thread Finish Qty06C125WK #6 1 1/4” Fine Exterior 1000 Box06C162WK #6 1 5/8” Fine Exterior 1000 Box08C300WK #8 3” 2/3 Fine Exterior 1000 Box

APPLICATIONS AND FEATURESSharp point drywall screws used for fastening interior Drywall to wood.

APPLICATIONS AND FEATURESSharp point, fine thread, Drywall screws used for fastening interior Drywall to light gauge metal studs.

APPLICATIONS AND FEATURESDrywall screws with a self drilling point used for fastening interior Drywall board to heavy gauge metal studs.

Gypsum to Heavy SteelAPPLICATIONS AND FEATURESScrews with a self drilling point used for fastening exterior Gypsum board to heavy gauge metal studs.

Sharp#2 Phillips Bugle

#2 Phillips Bugle Sharp

Drill#2 Phillips Bugle

Wood to Wood

Item Code Gauge Length Thread Finish Qty08F150Y #8 11/2” Coarse Yellow Zinc 1000 Tub08F175Y #8 1 3/4” 2/3 Coarse Yellow Zinc 1000 Tub08F200Y #8 2” 2/3 Coarse Yellow Zinc 1000 Tub08F250Y #8 2 1/2” 2/3 Coarse Yellow Zinc 800 Tub08F300Y #8 3” 2/3 Coarse Yellow Zinc 800 Tub10F200Y #10 2” 2/3 Coarse Yellow Zinc 1000 Tub

Item Code Gauge Length Thread Finish Qty08F200YBTHSS #8 2” High Low Yellow Zinc 4000 Box

APPLICATIONS AND FEATURESGeneral purpose wood screws commonly used for interior subflooring.

APPLICATIONS AND FEATURESType 17 point for quick drives, commonly used for interior Nova Deck (same as particle board) and subflooring.

APPLICATIONS AND FEATURESSpecially designed wood screw intended for use in harder engineered lumber and flooring materials.

Item Code Gauge Length Thread Finish Qty08L175YB #8 1 3/4” Coarse Yellow Zinc 4000 Box

#2 Square Flat Sharp

#2 Square SharpTrimhead + nibs

#2 Square Flat Type 17

Underlayment

Item Code Gauge Length Thread Finish Qty07Q100PB #7 1” High Low Gray Phosphate 4000 Box07Q125PB #7 1 1/4” High Low Gray Phosphate 4000 Box

Item Code Gauge Length Thread Finish Qty07Q125PBQ #7 1 1/4” High Low Gray Phosphate 4000 Box

APPLICATIONS AND FEATURESTrim head screws designed for underlayment, high speed wood to wood and crating/pallet applications.

Sharp#2 Phillips

Sharp#2 Square

Trim head + nibs

Trim head + nibs

7574

SENCO® AUTO-FEED SCREWSSENCO® AUTO-FEED SCREWS

Page 40: Senco Product Catalog

Metal to Metal

Item Code Gauge Length Thread Finish Qty10M075CTMFDS #10 3/4” Fine Clear Zinc 1000 Tub10M100CKMFDS #10 1’ Fine Clear Zinc 1000 Box

Item Code Gauge Length Thread Finish Qty10M075YTFFDX #10 3/4” Fine Yellow Zinc 1000 Tub

Item Code Gauge Length Thread Finish Qty10M075CKNFDP #10 3/4” Fine Clear Zinc 1000 Box

Item Code Gauge Length Thread Finish Qty10M075YLFT4X #10 3/4” 22 TPI Clear Zinc 8000 Loose10M075YKFT4X #10 3/4” 22 TPI Clear Zinc 1000 Box12M087YKFF4X #12 7/8” Fine Yellow Zinc 1000 Box

Item Code Gauge Length Thread Finish Qty12M100YKFF3X #12 1” Fine Yellow Zinc 1000 Box

Item Code Gauge Length Thread Finish Qty10M062CBFFDX #10 5/8” Fine Clear Zinc 6000 Box12M150CTFFDX #12 1 1/2” Fine Clear Zinc 1000 Tub

APPLICATIONS AND FEATURESGeneral purpose metal to metal screws

#2 Square Modifiedflat pan

Drill

Reducedwafer

Drill#2 Phillips

DrillRex Drive Flat pan

Rex Drive Flat pan T4 Drill

Rex Drive Flat pan T3 Drill

DrillRex Drive Flat pan

Light Metal Framing

Item Code Gauge Length Thread Finish Qty07M044PTPDSP #7 7/16” Double Grey Phosphate 1000 Tub

Item Code Gauge Length Thread Finish Qty08M050CTRFDP #8 1/2” Fine Clear Zinc 1000 Tub

Item Code Gauge Length Thread Finish Qty08M050CTRFSP #8 1/2” Fine Clear Zinc 1000 Tub

APPLICATIONS AND FEATURESSelf taping metal framing screw.

#2 Phillips Framing pan Sharp

DrillReducedmod truss

#2 Phillips

SharpReducedmod truss

#2 Phillips

Specialty

Item Code Gauge Length Thread Finish Qty08X125CKADDS #8 1 1/4”” Double Clear Zinc 1000 Box08X200CKADDS #8 1 1/2” Double Clear Zinc 1000 Box

APPLICATIONS AND FEATURESGeneral purpose screws used in a wide array of applications including window installation and crating. Ideal for applications where the screw is not intended to countersink below the surface.

Item Code Gauge Length Thread Finish Qty08X125CBACTS #8 1 1/4” Coarse Clear Zinc 4000 Box

#2 Square DrillRound Washer

#2 Square Round washer Type 17

Fastener Applications

Fastener Finishes

DRYWALL/ GYPSUM SHEATHING COMPOSITEDECKING

SHEATHING (SUBFLOOR,UNDERLAYMENT,CEMENT BOARD) SPECIALTY DECKING

METAL TOMETAL

Exterior/Brown Exterior/Red Exterior/TanExterior/Gray

Stainless 304 Zinc, Yellow Zinc, Clear

Exterior

Gray Phosphate

Cement Board

Item Code Gauge Length Thread Finish Qty08T125W #8 1 1/4” High Low Exterior 1000 Tub08T200W #8 2” High Low Exterior 1000 Tub

Item Code Gauge Length Thread Finish Qty08T150WBWFDS #8 1 1/2” Fine Exterior 4000 Box

APPLICATIONS AND FEATURESCement board, Hardie® board to wood. Exterior finish.

APPLICATIONS AND FEATURESCement board, Hardie® board to steel studs. Exterior finish.

Wafer + nibs#2 Square Spoon

Wafer + nibs#2 Square Drill

Decking and Docks

Composite Decking

Item Code Gauge Length Thread Finish Qty08D175W #8 1 3/4” 2/3 Coarse Exterior 1000 Tub08D200W #8 2” 2/3 Coarse Exterior 1000 Tub08D250W #8 2 1/2” 2/3 Coarse Exterior 800 Tub08D300W #8 3” 2/3 Coarse Exterior 800 Tub08D250S #8 2 1/2” 2/3 Coarse Stainless 304 800 Tub09D300S #9 3” 2/3 Coarse Stainless 304 800 Tub

Item Code Gauge Length Thread Finish Qty08R250W #8 2 1/2” 2/3 Coarse Exterior 800 Tub08R300W #8 3” 2/3 Coarse Exterior 800 Tub08R250S #8 2 1/2” 2/3 Coarse Stainless 304 800 Tub

Item Code Gauge Length Thread Finish Qty08S250W003 #8 2 1/2” 1/2 Coarse Exterior/Gray 800 Tub08S300W003 #8 3” 1/2 Coarse Exterior/Gray 800 Tub

Item Code Gauge Length Thread Finish Qty08S250W592 #8 2 1/2” 1/2 Coarse Exterior/Tan 800 Tub08S300W592 #8 3” 1/2 Coarse Exterior/Tan 800 Tub

Item Code Gauge Length Thread Finish Qty08S250W596 #8 2 1/2” 1/2 Coarse Exterior/Red 800 Tub08S300W596 #8 3” 1/2 Coarse Exterior/Red 800 Tub

Item Code Gauge Length Thread Finish Qty08S250W497 #8 2 1/2” 1/2 Coarse Exterior/Brown 800 Tub08S300W497 #8 3” 1/2 Coarse Exterior/Brown 800 Tub

APPLICATIONS AND FEATURESTrim head screws for attaching composite decking to wood.

APPLICATIONS AND FEATURESSpecially designed cup head screws eliminate the mushrooming around the screw head common with composite deck installation.

APPLICATIONS AND FEATURESExterior wood screws for any exterior project like decks, fencing, siding, docks and more.

#2 Square Cupped Pan Sharp

#2 Square Flat Type 17

#2 Square Trim Type 17

Stainless 304

Stainless 304

Wood Flooring

Item Code Gauge Length Thread Finish Qty08L125CBLCTS #8 1 1/4” Coarse Clear Zinc 4000 Box

APPLICATIONS AND FEATURESSelf tapping interior screw for attaching wood flooring to wood.

#2 Square Flat Type 17

7776

SENCO® AUTO-FEED SCREWSSENCO® AUTO-FEED SCREWS

Page 41: Senco Product Catalog

Attachment Kits include 3 bits

For use with prior Duraspin tools

Integrated tools include 2 bits

Bits Fits item# item# item#DS200-AC EA0122 EA0123 EA0269 DS202-14VDS205-14VDS212-18V EA0297 EA0298 EA0299DS215-18V DS232-AC DS235-AC DS275-18V EA0140 EA0141 EA0270DS300-AC DS312-18V EA0300 EA0301 EA0302

DS332-AC

Bits Fits item# item# item#DS325AC EA0271 EA0272 EA0273DS340AC DS425AC EA0314 EA0315 EA0316DS440AC

Bits Fits item#SG2510 EA0308SG4100

BitsIntegrated Auto-Feed Screw System two drive bits per pack

Bit TipsBulk Screwdriver10 drive bits per pack

BitsScrewdriver Attachment Kit two drive bits per pack

Bits Screwdriver & Attachments two drive bits per pack

SENCO SG2510 item# item# item#

+ DS110 EA0277 EA0278 EA0279

+ DS210 EA0277 EA0278 EA0279

+ DS220 EA0311 EA0312 EA0313

+ DS310 EA0271 EA0272 EA0273

+ DS320 EA0314 EA0315 EA0316SENCO SG4100+ DS110 EA0277 EA0278 EA0279

+ DS210 EA0277 EA0278 EA0279

+ DS220 EA0311 EA0312 EA0313

+ DS310 EA0271 EA0272 EA0273

+ DS320 EA0314 EA0315 EA0316Makita with ADP019 and MB0174

+ DS110 EA0277 A0278 EA0279

+ DS210 EA0277 EA0278 EA0279

+ DS220 EA0311 EA0312 EA0313

+ DS310 EA0271 EA0272 EA0273

+ DS320 EA0314 EA0315 EA0316Makita with ADP011 and AD0020

+ DS110 EA0280 EA0281 EA0282

+ DS210 EA0280 EA0281 EA0282

+ DS220 EA0317 EA0318 EA0319

+ DS310 EA0274 EA0275 EA0276

+ DS320 EA0320 SEA0321 EA0322Black & Decker, DeWalt, Hitachi, Makita with ADP011 ADP020, TY1800

+ DS110 EA0280 EA0281 EA0282

+ DS210 EA0280 EA0281 EA0282

+ DS310 EA0274 EA0275 EA0276

+ DS220 EA0317 EA0318 EA0319

+ DS320 EA0320 EA0321 EA0322

Bit Tip Holder Bit Tips Fits item# item# item#DS162-14V XC0067 EA0142 EA0143 DS200-ACDS200-14VDS202-14VDS205-14VDS275-18V XC0070DS300-ACDS300-24V

Bit Tips & HoldersAuto-Feed Screw System five bit tips and one holder per pack

Screwdriver & Attachment Combinations

7978

SENCO AUTO-FEED SCREWS ACCESSORIESSENCO AUTO-FEED SCREWS ACCESSORIES

Nosepieces & Metal Washers for Lath & Building Wrap, Plaster, PM, Stucco, One Coat And Hard Coat Applications

Item# Diameter Box Count Fits Screw SeriesSWM125A 1¼” 1M 06A, 06B, 06C, 07A

Nosepieces & Plastic WashersBuilding Wrap, Eifs Installation, PB, PM, Stucco, One Coat And Hard Coat Applications

Item# Diameter Box Count Fits Screw SeriesSWM175A 1¾” 1M 06A, 06B, 06C, 07A (forms seal around screw)

Nosepieces for Wood, Drywall & Metal Framing Applications

SENCO Wood Drywall Metal Framing Fits Tools Range item# item# Range item#

DS200 1"-2" FA0211 FA0198 7⁄16" - 1¼" FC0489

DS200-S4

DS200-AC

DS202-14v

DS212-18v 1'-2" FB0157 FC0878 ½" - 2" FC0822

DS215-18v

DS220

DS232-AC

DS235-AC

DS312-18v 1"-3" FB0159 FC0895 ½" - 2" FC0887

DS320

DS332-AC

DS425AC

DS44OAC

TyRexDCF5000 1¼” NPC021

TY5100

SENCOFits Tools Range Item#DS275-18v 1¼” NPC030DS300-AC

TyRexDCF5000 1¾” NPC028

TY5100

SENCOFits Tools Range Item#DS275-18v 1¾” NPC029DS300-AC

SENCO AUTO-FEED SCREWS ACCESSORIES

Page 42: Senco Product Catalog

PC0436

PC0057 PC0051

ACCESSORIES Filters, Regulators, Lubricants, Plugs, Couplers, Hoses, Part Kits and more.

80

SENCO's assortment of filters, regulators, lubricators and gauges are precision engineered to meet the demanding requirements of professional contractors. Be sure that your compressor is running at peak performance by using SENCO certified replacement parts and accessories.

PC0656 PC0653 PC0657

Item # Description Max psig Max airflow FPT Size NPT GaugePC0660 Filter/Regulator with Gauge 150 14 SCFM 1/4" 1/8"PC0655 Filter 150 14 SCFM 1/4"

Item # Description Max psig FPT Size MPT GaugePC0436 In-Line Regulator 150 1/4" 1/4" Regulate multiple tools from one compressor PC0057 Back-Mount Pressure Gauge 160 1/8"PC0051 Back-Mount Pressure Gauge 160 1/4"

Filters, Regulators & Lubricators

81

SENCO AUTO-FEED SCREWS ACCESSORIES

Adapter for Bulk Screwdrivers

Screwdriver

AdapterSENCO Fits Tools item#SG2510 MB0173

SG4100

SG2500 ADP015

SG4000

DeWaltDW252 ADP009

DW253

DW255

DW257

DW266

DW272

DW276

MAKITAFS2200 ADP019

FS2500

FS4200

FS6200

FS2701 MB0174

6805BV ADP020

6827

6820 ADP011

6821

6823

6824

6825

68261

HITACHIW6V4 ADP010

W6VA4

W6VB3

W6VM

W8VB2

WH14DM ADP017

TyRexTY1800 ADP014

SIOUXScrewdrivers with ¼" Internal Hex feature ADP018

For use when attaching bulk screwdrivers to attachments

Battery Systems

Works with all 18-volt Li-ion SENCO FUSION and Duraspin II tools.18v Li-ion Battery

18v Li-ion Battery item# VB0155

Fits DS212-18v

DS215-18v

DS315-18v

18v Li-ion Charger item# VB0156

ChargesVB0155

VB0118

14.4v NiCd Battery item# VB0023

Fits DS202-14v

DS205-14v

18v (NiCd) Battery item# VB0036

FitsDS275-18v

NiCd Charger item# VB0002

ChargesVB0023

VB0036

Air Regulation Accessories: Regulator with GaugeItem # Description Max psig Max airflow FPT Size NPT GaugePC0656 Mini Regulator with Gauge 250 14 SCFM 1/4" 1/8PC0653 Regulator with Gauge 300 14 SCFM 1/4" 1/8"PC0657 Regulator with Gauge 300 80 SCFM 3/8" 1/8"

PC0660 PC0655 PC0661

Plug and Coupler Hose Assembly SetsIndustrial Interchange

PC0563

PC0565

• Blister-packed for easy display• Also available bulk-packed in boxes of 10• Stainless steel locking ball bearings• Positive alignment and free swiveling action to reduce hose torque• Packaged hose assembly sets include a plug and a coupler

Plugs & Couplers Available StylesPlugs and couplers come in two styles, Industrial Interchange and Tru-Flate. Stay within one of these two system, or use a universal coupler to complete the connection.

Item # Description Body Size NPT Size Pack QtyPC0563 Connects to hose with MPT fittings 1/4" 1/4" FTP 1PC0565 Connects to hose without MPT fittings 1/4" 1/4" LHB 1

female

male

Universal Couplers Just push plug into coupler, no need to pull back on sleeveItem # Description BodySize NPT Size Pack QtyPC0900 Universal Coupler (female) 1/4" 1/4" FTP 1PC0698 Universal Coupler (female) 1/4" 1/4" FTP 10PC0901 Universal Coupler (male) 1/4" 1/4" FTP 1PC0699 Universal Coupler (male) 1/4" 1/4" FTP 10

Page 43: Senco Product Catalog

Bulk Gray Hose

Gray without fittings

Gray with MPT ends

Gray with Plug & Coupler

ProFlex with MPT ends

PVC with MPT ends

83

ACCESSORIESPlugs & Couplers Industrial Interchange

ACCESSORIES

82

Plugs Industrial InterchangeItem # Description Body Size Size Pack QtyPC0479 Plug (male) 1/4" 1/4" MTP 2PC0231 Plug (male) 1/4" 1/4" MTP 10PC0480 Plug (male) 1/4" 3/8" MTP 2PC0413 Plug (male) 1/4" 3/8" MTP 10PC0486 Plug (male) 3/8" 1/4" MTP 2PC0485 Plug (male) 3/8" 3/8" MTP 2PC0477 Plug (female) 1/4" 1/4" FTP 2PC0239 Plug (female) 1/4" 1/4" FTP 10PC0478 Plug (female) 1/4" 3/8" FTP 2PC0410 Plug (female) 1/4" 3/8" FTP 10PC0576 Plug (push-on barb) 1/4" 1/4" LHB 1PC0235 Plug (push-on barb) 1/4" 1/4" LHB 10PC0577 Plug (push-on barb) 1/4" 3/8" LHB 1PC0412 Plug (push-on barb) 1/4" 3/8" LHB 10PC0243 Plug (push-on barb) 1/4" 1/4" SHB 10

Couplers Industrial InterchangeItem # Description Body Size Size Pack QtyPC0503 Coupler (male) 1/4" 1/4" MPT 1PC0201 Coupler (male) 1/4" 1/4" MPT 10PC0504 Coupler (male) 1/4" 3/8" MPT 1PC0380 Coupler (male) 1/4" 3/8" MPT 10PC0509 Coupler (male) 3/8" 3/8" MPT 1PC0510 Coupler (male) 3/8" 1/4" MPT 1PC0501 Coupler (female) 1/4" 1/4" FPT 1PC0209 Coupler (female) 1/4" 1/4" FPT 10PC0502 Coupler (female) 1/4" 3/8" FPT 1PC0378 Coupler (female) 1/4" 3/8" FPT 10PC0507 Coupler (female) 3/8" 3/8" FPT 1PC0505 Coupler (push-on barb) 1/4" 1/4" LHB 1PC0205 Coupler (push-on barb) 1/4" 1/4" LHB 10PC0506 Coupler (push-on barb) 1/4" 3/8" LHB 1PC0379 Coupler (push-on barb) 1/4" 3/8" LHB 10PC0213 Coupler (push-on barb) 1/4" 1/4" SHB 10

Plug Male Coupler MalePlug Female Coupler FemalePlug Push-On Locking Barb CouplerPush-On Locking BarbPlug Push-On Standard Barb Coupler Push-On Standard Barb

Air HosesSENCO offers a wide variety of air hoses in various materials, sizes and specifications for your job site.Quick Couple Rubber Hose – SENCO’s Best• Handles up to 250 psi working pressure • 4 to 1 working pressure to burst safety factor • Oil resistant nitrile tube • Tough, flexible neoprene cover• Braided textile reinforcing for max strength & kink resistance • Remains flexible, temperature ranges: -40 ˚F to 200 ˚FItem # Description Hose Size Length Qty.PC0045 Gray without fittings (Use with LHB type fittings) 1/4" 50 ft. 1PC0046 Gray without fittings (Use with LHB type fittings) 1/4" 100 ft. 1PC0048 Gray without fittings (Use with LHB type fittings) 3/8" 50 ft. 1PC0049 Gray without fittings (Use with LHB type fittings) 3/8" 100 ft. 1PC0059 Gray with MPT ends (Use with FPT type fittings) 1/4" 50 ft. 1PC0060 Gray with MPT ends (Use with FPT type fittings) 1/4" 100 ft. 1PC0062 Gray with MPT ends (Use with FPT type fittings) 3/8" 50 ft. 1PC0063 Gray with MPT ends (Use with FPT type fittings) 3/8" 100 ft. 1PC0064 Gray with Indusstrial Interchange Plug & Coupler fittings 1/4" 50 ft. 1PC1152 Gray with Indusstrial Interchange Plug & Coupler fittings 1/4" 100 ft. 1PC0065 Gray with Indusstrial Interchange Plug & Coupler fittings 3/8" 50 ft. 1PC0041 Bulk Gray without fittings (Use with LHB type fittings) 1/4" 450 ft. & up 1PC0042 Bulk Gray without fittings (Use with LHB type fittings) 3/8" 450 ft. & up 1Bulk hose can only be purchased in reels of 450 feet and up combined length with a maximum of four sections. Priced by the foot. Not packaged for retail.

Air HosesProFlex™ Reinforced Polyurethane Red Air Hose Lightest available non-marring flexible hose!• Flexible in cold weather, temperature range: -48 ˚F to 150 ˚F •Durable – oil and fuel resistant • Working pressure: 250 psi • With MPT Threaded EndsItem # Description Hose Size Length Qty.PC0977 ProFlex with MPT ends (Use with FPT type fittings) 1/4" 50 ft. 1PC0978 ProFlex with MPT ends (Use with FPT type fittings) 1/4" 100 ft. 1PC0979 ProFlex with MPT ends (Use with FPT type fittings) 3/8" 50 ft. 1PC0980 ProFlex with MPT ends (Use with FPT type fittings) 3/8" 100 ft. 1

PVC Air Hose • Specially formulated polyvinyl chloride • Resistant to lubricating oils, chemicals and ultraviolet sunlight • Flexible temperatures: -20 ˚F to 150 ˚F • Handles up to 300 psi working pressure • With MPT Threaded EndsItem # Description Hose Size Length Qty.PC0975 PVC with MPT ends (Use with FPT type fittings) 1/4" 50 ft. 1PC0978 PVC with MPT ends (Use with FPT type fittings) 3/8" 50 ft. 1

Air Hose AccessoriesSplicer Item # Description Size Pack QtyPC0643 Push-On Barbed Hose Splicer 1/4" LHB 2PC0644 Push-On Barbed Hose Splicer 3/8" LHB 2

ProFlex Hose Fittings Item # Description Size Pack QtyPC0983 Brass hose end 1/4" MPT 1PC0984 Brass hose end 3/8" MPT 1PC0987 Brass hose end & Splicer 1/4" MPT 1PC0988 Brass hose end & Splicer 3/8" MPT 1

Hose ClampsItem # Description Pack QtyPC0352 1/4" Hose Clamp 1PC0353 3/8" Hose Clamp 1PC0354 5/8" Hose Clamp 1PC0443 Hose Clamp Crimping Pliers 1

Tri-Pod ManifoldItem # Description Inlet Thread Outlet ThreadPack QtyPC0444 3-Way Round Manifold 3/8" FPT 1/4" FPT 1PC1138 3-Way Flat Manifold 1/4" plug 1/4" coupler 1 Industrial Interchange

Blow GunItem # Description Inlet Thread QtyPC0489 Air Blow Gun 31/4" FPT 1

Teflon® Thread Sealing TapeItem # Description Qty PC0349 1/2" x 260 ft. Sealing Tape 1

LHB - Locking Hose Barb, no clamp required when used with SENCO Quick Couple Hose. SHB - Standard Hose Barb, requires hose clamps. See page 83 for hose clamps.Danger: Failure to use proper hose clamp with SHB fittings may result in hose detaching from fitting and causing personal injury.

Page 44: Senco Product Catalog

Standard width X-wide width FIP42XP Belt Hook

LED Fuel GaugeCharging Indicator display

85

ACCESSORIES

84

Safety GlassesSENCO’s safety glasses offer the ultimate in style and comfort while providing the highest level of eye protection. Produced with a strong, lightweight poly carbonate lens that meets or exceeds ANSI Z87.1 and CE EN 166 safety standards. Item # Description Case Qty.PC1166 Wrap-around design filters 99.9% of UVA & UVB rays. For indoor and outdoor us 10PC1284 Standard Clear Glasses 10

Tool Belt HooksItem # Description Size Qty.PC0350 Attaches to 1/4" air fitting on tool Standard 1PC0629 Attaches to 1/4" air fitting on tool X-Wide 1PC0351 Attaches to 3/8" air fitting on tool Standard 1PC0629 Attaches to 3/8" air fitting on tool X-Wide 1PC0934 Attaches to BELT Fits FinishPro42XP 1

Drain CockItem # Description Size Qty.PC0357 Drains moisture from tank, finger adjustable. 1/4" MPT 1

No-Mar PadsNo-Mar Pads replacement, one per pack

*Reverse Safety, After Fall 2006 **Forward Safety, Pre-Fall 2006

Lubricants, Oil, Cleaners and Coating

ACCESSORIES

Pneumatic Tool Oil • Premium-grade oils formulated with high-quality paraffin distillate stocks• Contains a carefully balanced rust and oxidation inhibitor with an effective anti-foaming additiveItem # Description BottleSize Case Qty.PC0101 Pneumatic Tool Oil 1/2 pint 8 oz 12PC0102 Pneumatic Tool Oil 1 quart 32 oz 12PC0103 Pneumatic Tool Oil 1 gallon 128 oz 4

Compressor Pump Oil• Premium-grade oils formulated with high-quality naphthenic distillate stocks • Recommended for all oil-splash compressors• Protects against corrosion • Lubricates to extend part lifeItem # Description BottleSize Case Qty.PC0344 Compressor Pump Oil 1 quart 32 oz 12

Moisture Shield Tool Lubricant• For use in cold weather and/or high moisture areas • Protects against corrosion• Lubricates to extend part life • Special additive to minimize exhaust fogItem # Description BottleSize Case Qty.PC1295 Moisture Shield Tool Lubricant 1 quart 32 oz 12

Tool Lubricant• Protects against corrosion • Lubricates to extend part life • Special additive to minimize exhaust fogItem # Description BottleSize Case Qty.YB0123 Tube of Tool Lubricant 4 oz tube 12

Item # No-Mar Pads Fit: HC0626 GT65DA HC0625 GT65RHAHA0200 GT90CHHA0201 GT90FRHHC0536 SCN49070063 SCN56HF0079 SFN30, SFN40, SFNI HB0057 SFN2 HC0507 SLS15, SLS18HC0572 SLS15MG, SLS18Mg HF0028 SLS20, SLS20XP (K, L, & R crowns)HF0029 SLS20, SLS20XP (M crown)HF0028 SLS25-L, SLS25XP-L

Item # No-Mar Pads Fit:HF0083 AF25, CF25HF0079 AF41, CF41HC0463 FIP11HC0506 FIP15, FIP18HC0571 FIP15Mg, FIP18MgHF0064 FIP25XPHC0396 FIP32*HCO401 FIP32**HF0079 FIP41XP, FIP42XPHF0113 FN55AX HF0110 FN65DAHF0046 & HC0253 FP600-650 SeriesHA0170 FP601, FP602, FP651, FP652HF0046 & HC0253 FP700 SeriesAF: AirFree, CF: Cordless Finish, FIP: FinishPro®, FP: FramePro®, FN: Fusion, GTL: Gas Tool

Li-ion Batteries and Chargers

VB0156VB0155

Li-ion Battery ChargerCharges these batteries: VB0118, VB0155

One Common Battery Platform. Works with all 18-volt Li-ion SENCO FUSION and Duraspin II tools.SENCO's 18-volt Li-ion battery is designed for long running times with quick recharges and operates at full speed until depleted, so there is no gradual drop in power during use. Batteries can be charged hundreds of times without any noticeable loss in capacity, and a special LED fuel gauge displays the battery life with a touch of a button.

VB0155 18 volt Li-ion Battery• SENCO's VB0155 18v Li-ion battery is compatible with all

the SENCO 18v Li-ion cordless tools.• High quality, reliable cells • 1.5 amp hour• Low self-discharge rate – longer storage life• Charges to 80% in 15-20 minutesNOTE: VB0155 battery requires the SENCO battery charger model VB0156

VB0156 18 volt Li-ion Battery Charger• VB0156 Battery Charger can be used interchangeably with

SENCO VB0155 and VB0118 batteries.• Quick charging system reaches 80% in just 15-20 minutes• Battery charge indicators display the charge status of

your batteryNOTE: Older charger model VB0120 included with early Fusion tools will NOT charge the NEW VB0155 battery

Li-ion Battery Fits these FUSION Tools: F-15 (5N0001N), F-16A (5P0001N), F-16S (6U0001N) F-18 (6E0001N)Fits these Duraspin tools: DS215-18v (7W0001N), DS212 (7X0001N), DS312-18v (7Y0001N)

Scan for more on SENCO's 18 volt Li-ion battery &

charger.

Item# NiCd Slide Battery Systems Qty Fits

VB0023 Battery 14.4v (2.0Ah) 1 From 06/05 on: DS202-14v, DS205-14v, AirFree®25, 32 & 41, Cordless Finish 25, 32 and 41VB0036 Battery 18v (2.0Ah) 1 DS275-18v VA0037 Battery 24v (2.0Ah) 1 DS300-24vVB0002 Charger 9.6v-24v 1 Charges VB0022, VB0023, VB0036 & VB0037 Batteries

NiCd Slide Batteries and ChargerNiCd Powered DuraSpin, Finish Cordless, AirFree Cordless Tools

VB0002VB0036VB0023

Page 45: Senco Product Catalog

1G0101N . . . . FramePro 601 Framing Nailer ((30º-34º) . . . . . . . . . . . . . . . 2" Thru 3-1/2" . . . . . . . . . . . . . 13

1U0021N . . . FinishPro 18Mg 18 gauge Brad Nailer . . . . . . . . . . . . . . . . . 5/8" Thru 2-1/8" . . . . . . . . . . . . 8

1W0021N . . . SLS 18Mg 18 gauge (L wire 1/4" crown), w/case . . . . . . . . 3/8" Thru 1-5/8" . . . . . . . . . . . 27

1X0201N . . . . FinishPro 32, 16 gauge, Finish Nailer, w/case . . . . . . . . . . . 1-1/4" Thru 2-1/2" . . . . . . . . . . 7

2C0001N . . . . FinishPro 10, 23 gauge Micro Pinner . . . . . . . . . . . . . . . . . . 1/2" Thru 1". . . . . . . . . . . . . . . . 9

2D0101N . . . . FinishPro 2N1, 18 gauge, w/case . . . . . . . . . . . . 5/8"–1-1/4" Brads, 1/2"–1" Staples . . . . 8

220101N . . . . SC1XP Senclamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5/16" Thru 9/16". . . . . . . . . . . 33

3C0001N . . . . RoofPro 450 Roofing Coil Nailer . . . . . . . . . . . . . . . . . . . . . . 3/4" Thru 1-3/4" . . . . . . . . . . . 18

3D0101N . . . . RoofPro 455XP Roofing Coil Nailer . . . . . . . . . . . . . . . . . . . . 3/4" Thru 1-3/4" . . . . . . . . . . . 18

3L0003N . . . . SNS41 17-16 gauge. (O/N wire 7/16" crown) w/case . . . . . 1" Thru 2". . . . . . . . . . . . . . 20, 30

300120N . . . . SKSXP -L 18 gauge ( L wire 1/4" crown). . . . . . . . . . . . . . . . 3/4" Thru 1-1/2" . . . . . . . . . . . 28

300152N . . . . SKSXP-M 18 gauge (M wire 3/8" crown) . . . . . . . . . . . . . . . 3/4" Thru 1-1/2" . . . . . . . . . . . 28

300184N. . . . SKSXP-N 16 gauge (N wire 7/16" crown) . . . . . . . . . . . . . . . 3/4" Thru 1-1/2" . . . . . . . . . . . 28

4A0001N . . . BC58 Button Cap Stapler, w/case . . . . . . . . . . . . . . . . . . . . . 5/8" staple into 1" button. . . 19

4C0001N . . . . SFW09 22 gauge (C wire 3/8" crown). . . . . . . . . . . . . . . . . . 5/32" Thru 5/8". . . . . . . . . . . . 27

220101N . . . . SC1XP Senclamp, Cycle-thru restricted trigger. . . . . . . . . . 5/16” Thru 9/16” . . . . . . . . . . . 33

4G0001N . . . FinishPro 42XP 15 ga Finish Nailer, w/case . . . . . . . . . . . . . 1-1/4" Thru 2-1/2" . . . . . . . . . . 5

4H0101N . . . FramePro325FRHXP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2" Thru 3-1/4" . . . . . . . . . . . . . 13

4L0001N . . . . PalletPro 57FXP Coil Nailer. . . . . . . . . . . . . . . . . . . . . . . . . . . 1" Thru 2-1/4" . . . . . . . . . . . . . 23

4W0001N . . . WC150XP 16 gauge (P wire 1" crown) . . . . . . . . . . . . . . . . . 5/8" Thru 1-1/2" . . . . . . . . . . . 30

4X0001N . . . . WC150RXP Roofing 16 gauge (P wire 1" crown) . . . . . . . . 5/8" Thru 1-1/2" . . . . . . . . . . . 19

4Y0001N . . . . WC200XP Lathing 16 gauge (P wire 1" crown). . . . . . . . . . 7/8" Thru 2". . . . . . . . . . . . . . . 30

4Z0101N . . . . FP325XP Framing Nailer (30º-34º) . . . . . . . . . . . . . . . . . . . . 2” Thru 3-1/4” . . . . . . . . . . . . . 12

430101N . . . . SLP20XP 18 gauge Brad Nailer, w/case . . . . . . . . . . . . . . . . 5/8" Thru 1-5/8" . . . . . . . . . . . . 7

470001N . . . . SC2XP Corrugated Fastener Tool . . . . . . . . . . . . . . . . . . . . . . 1/4" Thru 1/2" . . . . . . . . . . . . . 33

490009N . . . SLS20XP-M 18 gauge (M wire 3/8" crown) Sencomatic . . 3/8" Thru 1-1/2" . . . . . . . . . . . 28

490101N . . . . SLS20XP-K 19 gauge (K wire 1/4" crown) . . . . . . . . . . . . . . 1/2" Thru 1". . . . . . . . . . . . . . . 28

490103N . . . . SLS20XP-L 18 gauge ( L wire 1/4" crown) . . . . . . . . . . . . . . 3/8" Thru 1-1/2" . . . . . . . . . . . 28

490105N . . . . SLS20XP-L 18 gauge (L wire 1/4" crown) w/case . . . . . . . . 3/8" Thru 1-1/2" . . . . . . . . . . . 28

490015N . . . . SLS20XP-L 18 gauge ( L wire 1/4" crown) Sencomatic . . . 3/8" Thru 1-1/2" . . . . . . . . . . . 28

490107N . . . . SLS20XP-M 18 gauge (M wire 3/8" crown) . . . . . . . . . . . . . 3/8" Thru 1-1/2" . . . . . . . . . . . 28

490111N . . . . SLS20XP-R 19 gauge (R wire 3/16" crown) . . . . . . . . . . . . . 1/2" Thru 1". . . . . . . . . . . . . . . 28

490021N . . . . SLS20XP-HF Hardwood Flooring 19 ga. (R wire 3/16" cr.). . 5/8" Thru 1" . . . . . . . . . . . . . . 34

5A0001N . . . SN952XP Framing Nailer (full round head) . . . . . . . . . . . . . 2-3/8" Thru 3-1/2" . . . . . . 13, 20

5B0001N . . . SN951XP Framing Nailer (30º-34º) . . . . . . . . . . . . . . . . . . . 2-3/8" Thru 4" . . . . . . . . . . . . . 12

5J0001N . . . . SCN49XP Siding Coil Nailer . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/4 Thru 2-1/2" . . . . . . . 20, 23

5L0001N . . . . PalletProXP100 Coil Nailer . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1/4" Thru 4" . . . . . . . . . . . . . 24

5M0001N . . . PalletProXP130 Coil Nailer . . . . . . . . . . . . . . . . . . . . . . . . . . . 3" Thru 5 1/8". . . . . . . . . . . . . 24

5N0001N . . . FUSION F-15 Battery 15 ga. 34º Finish Nailer, w/case . . . . 1-1/4" Thru 2-1/2" . . . . . . . . . . 3

5P0001N. . . . FUSION F-16A Battery 16 ga. 20º Finish Nailer, w/case . . 1-1/4" Thru 2-1/2" . . . . . . . . . . 3

520101N . . . . SCN60XP Coil Nailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2" Thru 2-3/4" . . . . . . . . . . . . . 22

540101N . . . . SCN65XP Coil Nailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2" Thru 3-1/2" . . . . . . . . . . . . . 22

540104N . . . SCN65XP Coil Nailer, Toenail Safety . . . . . . . . . . . . . . . . . . . 2" Thru 3-1/2" . . . . . . . . . . . . . 22

6E0001N . . . . FUSION F-18 Battery 18 gauge Brad Nailer, w/case . . . . . . 5/8" Thru 2-1/8" . . . . . . . . . . . . 4

GF0001N . . . FinishPro 33Mg 16 gauge 20º Finish Nailer, w/case. . . . . . 1-1/4" Thru 2-1/2" . . . . . . . . . . 6

6G0001N . . . FinishPro35Mg 15 gauge 34º Finish Nailer, w/case. . . . . . 1-1/4" Thru 2-1/2" . . . . . . . . . . 6

6K0001N. . . . JoistPro250XP Metal connector nailer . . . . . . . . . . . . . . . . . 1-1/2" Thru 2-1/2" . . . . . . . . . 14

6S0001N . . . . SFT10XP-A/D 22 gauge (A/D wire 3/16 crown). . . . . . . . . . 1/4" Thru 5/8" . . . . . . . . . . . . . 26

6S0101N . . . . SFT10XP-A/D Auto 22 gauge (A/D wire 3/16 crown) . . . . . 1/4” Thru 5/8” . . . . . . . . . . . . . 26

6S0101N . . . . SFT10XP-A/D Auto 22 gauge (A/D wire 3/16 crown) . . . . . 1/4" Thru 5/8" . . . . . . . . . . . . . 26

6S0211N . . . . SFT10XP-B D/L 22 gauge (B wire 1/2” crown). . . . . . . . . . . 1/4" Thru 1/2" . . . . . . . . . . . . . 26

ITEM CODE TOOL INDEX

6S0311N . . . . SFT10XP-B D/L 22 gauge (B wire 1/2” crown). . . . . . . . . . . .1/4" Thru 1/2" . . . . . . . 26

6S0011N . . . . SFT10XP-B Auto D/L 22 gauge (B wire 1/2” crown) . . . . . . .1/4" Thru 1/2" . . . . . . . 26

6S0021N . . . . SFT10XP-C 22 gauge (C wire 3/8" crown) . . . . . . . . . . . . . . .5/32" Thru 5/8" . . . . . . 26

6S0121N . . . . SFT10XP-C Auto 22 gauge (C wire 3/8" crown). . . . . . . . . . .5/32" Thru 5/8" . . . . . . 26

6S0221N . . . . SFT10XP-C D/L 22 gauge (C wire 3/8" crown) . . . . . . . . . . . .5/32" Thru 5/8" . . . . . . 26

6S0321N . . . . SFT10XP-C Auto D/L 22 gauge (C wire 3/8" crown) . . . . . . .5/32" Thru 5/8" . . . . . . 26

6S0421N . . . . SFT10XP-C Long nose 22 gauge (C wire 3/8" crown). . . . . .5/32" Thru 5/8" . . . . . . 26

6S0031N . . . . SFT10XP-E 20 gauge (E wire 3/16" crown). . . . . . . . . . . . . . .3/8" Thru 5/8" . . . . . . . 26

6S0041N . . . . SFT10XP-F 20 gauge (F wire 1/2" crown). . . . . . . . . . . . . . . .1/4" Thru 1/2" . . . . . . . 26

6S0341N . . . . SFT10XP-F Auto 20 gauge (F-wire 1/2" crown) . . . . . . . . . .1/4" Thru 1/2" . . . . . . . 26

6S0051N . . . . SFT10XP-G 20 gauge (G wire 3/8” crown) . . . . . . . . . . . . . . .1/4" Thru 5/8" . . . . . . . 26

6S0251N . . . . SFT10XP-G D/L 20 gauge G wire 3/8” crown) . . . . . . . . . . . .1/4" Thru 5/8" . . . . . . . 26

6S0351N . . . . SFT10XP-G Auto D/L 20 gauge (G wire 3/8” crown). . . . . . .1/4" Thru 5/8" . . . . . . . 26

6S0361N . . . . SFT10XP-H Auto D/L 20 gauge (H wire 7/16” crown). . . . . .3/8" . . . . . . . . . . . . . . . . 26

6U0001N . . . FUSION F-16S Battery 16 ga. Finish Nailer, w/case. . . . . . . .3/4" Thru 2-1/2" . . . . . . 4

6X0002N . . . SG2510 2500 RPM Screwdriver . . . . . . . . . . . . . . . . . . . . . . . .Bulk Screws . . . . . . . . . 47

6X0004N . . . SG4100 4000 RPM Screwdriver . . . . . . . . . . . . . . . . . . . . . . . .Bulk Screws . . . . . . . . . 47

6W0001N . . . DS220 Auto-Feed Screw Driver Attachment . . . . . . . . . . . . .1” Thru 2” . . . . . . . . . . 45

6W0003N . . . DS320 Auto-Feed Screw Driver Attachment . . . . . . . . . . . . .1” Thru 2” . . . . . . . . . . 45

6W0011N . . . DS440AC Auto-Feed Screw Driver Attachment Kit . . . . . . .1” Thru 3” . . . . . . . . . . 46

6W0012N . . . DS425AC Auto-Feed Screw Driver Attachment Kit. . . . . . . .1” Thru 3” . . . . . . . . . . 46

620002N . . . SFN30 15 gauge Finish Nailer, w/case . . . . . . . . . . . . . . . . . .1" Thru 2" . . . . . . . . . . . . 6

660101N . . . . SQS55XP 15 gauge (Q wire 7/16" crown) . . . . . . . . . . . . . . . .1-1/4" Thru 2-1/2". . . . 31

7B0001N . . . SNS200XP, 16-17 gauge (O &N wire 7/16 crown) . . . . . . . . .1" Thru 2" . . . . . . . . 20, 31

7C0001N . . . . SNS200XP-BST, 16-17 gauge (O &N wire 7/16 crown) . . . . .1" Thru 2" . . . . . . . . 20, 31

7J0001N . . . . SCP40XP Pneumatic Concrete and Steel Pinner . . . . . . . . . .1/2" Thru 1-1/2" . . . . . 33

7L0001N . . . . JoistPro150XP Joist hanger nailer . . . . . . . . . . . . . . . . . . . . . .1-1/2" . . . . . . . . . . . . . . 14

7T0001N . . . . DS235-AC Auto-Feed Screw Driver . . . . . . . . . . . . . . . . . . . . .1” Thru 2” . . . . . . . . . . 44

7U0001N . . . DS232-AC Auto-Feed Screw Driver . . . . . . . . . . . . . . . . . . . . .1” Thru 2” . . . . . . . . . . 44

7V0001N . . . DS332-AC Auto-Feed Screw Driver . . . . . . . . . . . . . . . . . . . . .1” Thru 3” . . . . . . . . . . 44

7W0001N . . . DS215-18v Auto-Feed Screw Driver . . . . . . . . . . . . . . . . . . . .1” Thru 2” . . . . . . . . . . 43

7X0001N. . . . DS212-18v Auto-Feed Screw Driver . . . . . . . . . . . . . . . . . . . .1” Thru 2” . . . . . . . . . . 43

7Y0001N. . . . DS312-18v Auto-Feed Screw Driver . . . . . . . . . . . . . . . . . . . .1” Thru 3” . . . . . . . . . . 43

760102N . . . . FinishPro25XP, 18 Gauge Brad Nailer, w/case . . . . . . . . . . . .5/8" Thru 2-1/8" . . . . . . 7

8C0001N . . . . SLS150Mg-L 18 gauge (L wire 1/4” crown) . . . . . . . . . . . . . .1/2” Thru 1-9/16” . . . . 27

8D0001N . . . SHF200 Hardwood Flooring Nailer . . . . . . . . . . . . . . . . . . . . .1-1/2” Thru 2” . . . . . . . 34

8D0002N . . . SHFS200 Hardwood Flooring Stapler . . . . . . . . . . . . . . . . . . .1/2” Thru 2” . . . . . . . . . 34

8F0001N . . . . FinishPro23SXP, 23 gauge Headless Pinner, w/case . . . . . .1/2” Thru 1-3/8” . . . . . . 9

8H0001N . . . DFPXP Staples Clinch tool 20 gauge (F wire 1/2 crown . . . .5/16” Thru 1/2” . . . . . . 35

8J0001N . . . F75SXP Staples Sisal Anvil tool 18 gauge (J wire 7/16 crown 5/16” Thru 5/8” . . . . 35

8J0002N . . . F75LXP Staples Clinch tool 18 gauge (J wire 7/16 crown . .5/16” Thru 5/8” . . . . . . 35

8L0001N . . . . FinishPro23LXP, 23 gauge Headless Pinner, w/case. . . . . . .1/2” Thru 2” . . . . . . . . . . 9

8M0001N . . . FinishPro21LXP, 21 gauge Medium Head Pinner, w/case . .1” Thru 2” . . . . . . . . . . . . 8

820103N . . . . SLS25XP-L 18 gauge (L wire 1/4" crown). . . . . . . . . . . . . . . .3/8" Thru 1-1/2" . . . . . 28

820107N . . . . SLS25XP-M 18 gauge (M wire 3/8" crown). . . . . . . . . . . . . .3/8" Thru 1-1/2" . . . . . 28

MA0013 . . . . Vinyl Siding attachment for RoodPro455XP (3D0101N) . . .3/4" Thru 1-3/4" . . . . . 18

PC0700 . . . . . A11 Stapling Hammer 20 gauge (H wire 7/16" crown) . . . .3/8" . . . . . . . . . . . . . . . . 19

PC0781 . . . . . A20 Hand Nailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2" Thru 7" . . . . . . . . . . . 15

PC0947 . . . . . 18 ga. Brad Nailer & Compressor Kit. . . . . . . . . . . . . . . . . . . .5/8" Thru 2" . . . . . . . . . 36

PC0974 . . . . . FinishPro 10 Micro Pinner Compressor Kit. . . . . . . . . . . . . . .1/2" Thru 1" . . . . . . . . . 36

PC1195 . . . . . Mini Hand Nailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2" Thru 3-1/2" . . . . . . . 15

Item Code Description Fasteners Used pageItem Code Description Fasteners Used page

87

SENCO repair kits are designed to provide the parts normally needed to properly maintain and service your Senco tools.

• For XP tools, there are two kits available: a Firing/Triggering System Kit to repair top air leaks or sluggish operation and a Piston Stop Kit to repair bottom air leaks or poor return.

• For Pro Series tools, these two kits are combined into one convenient kit.

Tool Model Description Kit No.FinishPro 15, 18, 2N1 ....................................Repair Kit ................................... YK0393FinishPro 15Mg, 18Mg ..................................Repair Kit ................................... YK0780FinishPro23LXP .............................................Repair Kit ................................... YK0855FinishPro23SXP .............................................Repair Kit ................................... YK0854 FinishPro 25XP .............................................Frg/Trg System Kit .................... YK0281FinishPro 25XP .............................................Piston Stop Kit ........................... YK0282FinishPro 32 ..................................................Repair Kit ................................... YK0394FinishPro 33Mg .............................................Repair Kit ................................... YK0787FinishPro 35 ..................................................Repair Kit ................................... YK0365FinishPro 41XP, 42XP ....................................Frg/Trg System Kit .................... YK0361FinishPro 41XP, 42XP ....................................Piston Stop Kit ........................... YK0362FramePro 601, 602, 651, 652 ........................Repair Kit ................................... YK0360FramePro XP 701, 752, 702, 752 ...................Frg/Trg System Kit .................... YK0243FramePro XP 701, 752, 702, 752 ....................Piston Stop Kit............................ YK0244HN150, HN250 ...............................................Repair Kit ................................... BA0158JoistPro150XP ................................................Repair Kits .................................. YK0823, YK824JoistPro250XP ...............................................Repair Kits .................................. YK0825, YK0826LS1XP .............................................................Repair Kit ................................... YK0858MW ...............................................................Repair Kit ................................... YK0371PAL57F ..........................................................Repair Kit ................................... YK0446PAL70 ............................................................Repair Kit ................................... YK0447PAL90 ............................................................Repair Kit ................................... YK0774PAL100 ..........................................................Repair Kit ................................... YK0777PW150, PW200 .............................................Repair Kit ................................... YK0402PW150R ........................................................Repair Kit ................................... YK0403RoofPro™ 455XP ...........................................Frg/Trg System Kit .................... YK0424RoofPro 455XP ..............................................Piston Stop Kit ........................... YK0425RoofPro 450 ..................................................Repair Kit ................................... YK0426SC1 ................................................................Repair Kit ................................... YK0370SC2 ................................................................Repair Kit ................................... YK0371SCN48 ............................................................Repair Kit ................................... YK0769SCN49 ............................................................Repair Kit ................................... YK0771SCN60, SCN65 ...............................................Repair Kit ................................... YK0366SFN1, SKS, SPS ..............................................Repair Kit ................................... YK0376SFN1, SKS, SPS ...............................................Retrofit Kit ................................. Yj0035SFN30 ............................................................Repair Kit ................................... YK0368SFN40 ...........................................................Repair Kit ................................... YK0367SFT10XP, SFT10XP D/L, SFT10XP Long Nose .Piston Stop Kit............................ YK0802SFT10XP, SFT10XP D/L, SFT10XP Long Nose ..Kit Frg/Trg System Kit ............... YK0803SFT10XP (Auto) ..............................................Piston Stip Kit............................. YK0802SFT10XP (Auto) ..............................................Kit Frg/Trg System Kit ................ YK0804SFT10XP (Auto D/L) .......................................Piston Stip Kit ............................ YK0802SFT10XP (Auto D/L) ......................................Kit Frg/Trg System Kit ................ YK0804SFW09 ..........................................................Repair Kit ................................... YK0775SFW10XP ......................................................Piston Stop Kit ........................... YK0321SFW10XP .......................................................Frg/Trg System Kit .................... YK0322SLP20 ............................................................Repair Kit ................................... YK0373SLS15, SLS18 .................................................Repair Kit ................................... YK0393SLS15Mg, 18Mg .............................................Repair Kit ................................... YK0780SLS20 ............................................................Repair Kit ................................... YK0372SLS25XP ........................................................Piston Stop Kit ........................... YK0291SLS25XP ........................................................Frg/Trg System Kit .................... YK0359SCP40XP ........................................................Frg/Trg System Kit ..................... YK0444SCP40XP ........................................................Piston Stop Kit............................ YK0445SN901XP, SN902XP, FramePro325XP.............Frg/Trg System Kit .................... YK0444SN901XP, SN902XP, FramePro325XP.............Piston Stop Kit............................ YK0445SN951XP, SN952XP .......................................Frg/Trg System Kit .................... YK0444SN951XP, SN952XP ........................................Piston Stop Kit............................ YK0768SNS40 ...........................................................Repair Kit ................................... YK0374SNS41 ............................................................Repair Kit ................................... YK0423 SNS41 (Retrofit Kit) ......................................Cap/Firing valve ........................ YJ0034SNS44XP .......................................................Frg/Trg System Kit .................... YK0421SNS44XP .......................................................Piston Stop Kit ........................... YK0422SNS45XP .......................................................Frg/Trg System Kit .................... YK0230SNS45XP .......................................................Piston Stop Kit ........................... YK0231SNS50XP, SQS55XP ........................................Repair Kit ................................... YK0375SNS200XP-BST ..............................................Frg/Trg System Kit ..................... YK0838SNS200XP-BST ..............................................Piston Kit .................................... YK0839SNS200XP ......................................................Frg/Trg System Kit ..................... YK0840SNS200XP ......................................................Piston Kit .................................... YK0841SNS200XP ......................................................Block Out Kit .............................. YK0850SNS200XP ......................................................Siding Safety Kit ........................ HC0748WC150RXP, WC150XP, WC200XP ...................Repair Kit ................................... YK0783WC150RXP, WC150XP, WC200XP ...................Block Out Kit .............................. YK0783WC150XP .......................................................3/4" Staples Block Out Kit .......... YK0786WC150RXP, WC150XP, WC200XP ...................Retrofit Kit – Solid Safety .......... YJ0037See tool parts chart for complete list of available individual parts.Download SENCO tool parts charts at www.senco.com

PARTS KITS

86

Page 46: Senco Product Catalog

Limited WarrantySenco Brands, Inc.

Senco Brands, Inc. (“SENCO”) designs and constructs its products using the highest standards of material and workmanship. SENCO warrants to the original retail purchaser that the following products will be free from defects in material or workmanship for the warranty period specified below:

Air Compressors Palm/Hand Nailers & Pneumatic Tools: Fusion Tools: DuraSpin Tools: and Combo Kits: Gas Tools: Stapling Hammer: Five Years Two Years One Year One Year Two Years One Year

SENCO Batteries and Chargers:1. Subject to the exceptions, exclusions and limitations described below, SENCO warrants that the batteries and chargers used with SENCO Cordless tools will

be free from defects in material and workmanship for one year after the purchase date.

During the warranty period (which begins on the purchase date), SENCO will repair or replace, at SENCO’s option and expense, any product or part that is defective in materials or workmanship after examination by a SENCO Authorized Warranty Service Center, subject to the exceptions, exclusions and limitations described below. Any replacement product or part will carry a warranty for the balance of the warranty period applicable to the replaced product or part. A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS REQUIRED TO MAKE A WARRANTY CLAIM. Product registration can be accomplished through on-line Product Registration at www.senco.com or by completing and returning the postage paid product registration form included with your Operator’s manual/parts chart information, found inside the product carton. To make a warranty claim, you must return the product, with proper receipt/proof of purchase and return transportation charges prepaid, to a SENCO Authorized Warranty Service Center. A list of SENCO Authorized Warranty Service Centers can be found at www.senco.com or by calling 1-800-543-4596 toll free. SENCO will perform its obligations under this warranty, within a reasonable time after approval of the warranty claim.

WARRANTY EXCLUSIONSThe following warranty exclusions apply:1. Normal wear parts are not covered under this warranty. Normal wear parts include, for example, isolators, drive belts, air filters, rubber O-rings, seals, driver

blades, piston stops, piston/driver assembly, and fuel stems.2. This warranty does not cover parts damaged due to normal wear, misapplication, misuse, accidents, operation at other than recommended speeds or voltage

(electric units only), improper storage, or damage resulting during shipping.3. Products used in production/industrial applications as defined by SENCO are excluded from this warranty.4. Labor charges or loss or damage resulting from improper operation, maintenance or repairs are not covered by this warranty.

GENERAL WARRANTY CONDITIONSThis warranty will be honored, only if:A. Clean, dry, regulated compressed air has been used, at air pressure not exceeding the maximum indicated on the tool casting;B. No evidence of abuse, abnormal conditions, accident, neglect, misuse or improper modifications or storage of the product; andC. No Deviation from operating instructions, specifications, and maintenance schedules exists (read Operator Manual for use, specifications, and maintenance

instructions).

THIS WARRANTY IS THE ONLY WARRANTY ON THE PRODUCT, AND SENCO DISCLAIMS ALL OTHER WARRANTIES. ANY IMPLIED WARRANTIES WILL BE LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD SPECIFIED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOUR REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. SENCO SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL SENCO’S LIABILITY EXCEED THE PRICE OF THE PRODUCT WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE. NO EMPLOYEE OR REPRESENTATIVE OF SENCO OR ANY DISTRIBUTOR OR DEALER IS AUTHORIZED TO MAKE ANY CHANGE OR MODIFICATION TO THIS WARRANTY.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

REPLACEMENT OF TOOL DUE TO NATURAL DISASTERSENCO will replace any tool destroyed by an Act of God such as flood, earthquake, hurricane or other disaster resulting only from the forces of nature. Such a claim will be honored provided that such original retail purchaser had previously submitted a completed warranty registration card for the tool, and then submits proof of ownership and an acceptable statement describing such Act of God documented by an insurance carrier, police department, or other official governmental source. To obtain instructions for filing a claim call 1-800-543-4596.

CUSTOMER SATISFACTIONOne hundred percent customer satisfaction is our #1 goal. If for any reason the product does not perform to the original purchaser’s satisfaction, it can be returned to the place of purchase within thirty days from the date of purchase with dated sales receipt for a full refund of the purchase price.

©2013 by SENCO Brands, Inc. Cincinnati, Ohio 45245 USA www.senco.com082113

WARRANTY

88