sena va30 valve. - Valvulas Arco · SENA series are manually operated metallic ball valves that by...
Transcript of sena va30 valve. - Valvulas Arco · SENA series are manually operated metallic ball valves that by...
SENA series are manually operated metallic ball valves that by its design and raw materials are intended to be used in:
Drinking water networks.Water supply connection.Plumbing networksHot water networks.Heating systems.
In general all those applications where it is required a valve to stop the fluid supply, assuring the leaktightness in accordance to the working conditions.
Nominal pressure: 30 bar Test pressure: 45 bar Temperature range: -20ºC up to120ºC, excluding frozen.Fluid: Drinking water and hot water.
WATERSERIES
sena va30valve.
SCOPE
COMPONENTS
SERVICE CONDITIONS
TECHNICAL SHEET 07/2015 | IP18010
PAG. 1/8
Item Component Material Treatment
1 Cover LDPE
2 Handle Steel Geomet®
3 Handle nut Steel Geomet®
4 Stem European Brass CW614N Zinc plated
5 Sealing gland nut Brass Nickel plated
6 Sealing gland PTFE
7 Lateral European Brass CW617N Nickel plated
8 Ball Brass Chrome
9 Seat PTFE
10 Body European Brass CW617N Nickel plated
2 3 4 5 61
10 9 8 7
QUALITY BY TRADITION
PAG. 2/8
COMPONENTS
Item Component Material Treatment
1 Butterfly handle Metal Red epoxy
2 Handle nut Steel Geomet®
3 Stem European Brass CW614N Zinc plated
4 Sealing gland nut Brass Nickel plated
5 Sealing gland PTFE
6 Body European Brass CW617N Nickel plated
7 Seat PTFE
8 Ball Brass Chrome plated
9 Lateral European Brass CW617N Nickel plated
10 Nut European Brass CW617N Nickel plated
11 O-ring Elastomeric
12 Coupling European BrassCW617N Nickel plated
Item Component Material Treatment
1 Lateral European Brass CW617N Nickel plated
2 Handle nut Steel Geomet®
3 Stem European Brass CW614N Zinc plated
4 Sealing gland nut Brass Niquelado
5 Handle Steel Geomet®
6 Cover LDPE
7 Sealing gland PTFE
8 Body European Brass CW617N Nickel plated
9 Seat PTFE
10 Manual air vent Brass Nickel plated
11 Cap Brass Nickel plated
12 Ball Brass Chrome plated
2 3 4 5 61
101112 9 8 7
2 3 4 5 61
897
12 10 11
QUALITY BY TRADITION
Sealing gland
Body
Seat PTFE
PAG. 3/8
MAIN CONSTUCTIVE FEATURES
Body and lateral Main body and lateral manufactured in European brass alloy CW617N, by the mean of a hot stamping process. This process confers to the European brass alloy the following advantages against casting parts:
- Pores absence.
- Surfaces with better finished and without bumpy texture.
- Higher mechanical endurance .
Seats and sealing gland Seats and sealing gland are made in PTFE, avoiding internal and external leaktighness due to its perfect fit on metallic surfaces.
Spherical closure Spherical closure is made in brass, ensuring a higher mechanical endurance against high pressure and maneuvers.
Its diamond mechanized and the following chrome plated applied on the ball surface assure a long lifespan and a smooth maneuver.
Internal leaktightness (Close position) Internal leaktightness is assured in both directions by the PTFE seat that press against the spherical closure.
External leaktightness (Open position)
External leaktighness through the stem is assured by a PTFE sealing gland allowing its retightening if necessary.
Connections
Within the series SENA can find two types of threaded fasteners. The most common is the ISO 228 although female / female threaded version junctions can find NPT (ANSI / ASME B.120.1).
Lateral
QUALITY BY TRADITION
PAG. 4/8
DIMENSIONS
Female-Female. Lever Handle
G Thread (T) ISO 228 or NPT depending model
G Thread (T) ISO 228
Female-Female. Butterfly Handle
QUALITY BY TRADITION
Size A B C D E
1/4F x 1/4F 44 70 40 HEX17 G 1/4
3/8F x 3/8F 44 70 40 HEX17 G 3/8
1/2F x 1/2F 48 93 49 HEX25 G 1/2
3/4F x 3/4F 57 93 53 HEX30 G 3/4
1F x 1F 67 113 61 OCT 37 G 1
11/4F x 11/4F 76 113 66 OCT 47 G 1 1/4
11/2F x 11/2F 90 153 74 OCT 54 G 1 1/2
2F x 2F 107 153 81 OCT 67 G 2
21/2F x 21/2F 134 173 90 OCT 82 G 2 1/2
3F x 3F 152 238 116 OCT 96 G 3
4F x 4F 169 238 124 OCT120 G 4
B
A
C
D EE
Size A B C D E
3/8F x 3/8F 44 49 38 HEX17 G 3/8
1/2F x 1/2F 48 56 40 HEX25 G 1/2
3/4F x 3/4F 57 56 44 HEX30 G 3/4
1F x 1F 67 80 52 OCT 37 G 1
B
A
C
DEE
DIMENSIONS
PAG. 5/8
Male-Female. Lever Handle
G Thread (T) ISO 228
G Thread (T) ISO 228
Male-Female. Butterfly Handle
QUALITY BY TRADITION
Size A B C D E
3/8M x 3/8F 49 70 40 HEX17 G 3/8
1/2M x 1/2F 55 93 49 HEX25 G 1/2
3/4M x 3/4F 63 93 53 HEX30 G 3/4
1M x 1F 72 113 61 OCT 37 G 1
11/4M x 11/4F 85 113 66 OCT 47 G 1 1/4
11/2M x 11/2F 98 153 74 OCT 54 G 1 1/2
2M x 2F 119 153 81 OCT 67 G 2
Size A B C D E
3/8M x 3/8F 49 49 38 HEX17 G 3/8
1/2M x 1/2F 55 56 40 HEX25 G 1/2
3/4M x 3/4F 63 56 44 HEX30 G 3/4
1M x 1F 72 80 52 13789 G 1
B
A
C
B
A
C
DE
DE
E
E
DIMENSIONS
PAG. 6/8
Male - male. Lever Handle
G Thread (T) ISO 228
G Thread (T) ISO 228
Male - male. Butterfly Handle
G Thread (T) ISO 228
Manifold. Butterfly Handle
QUALITY BY TRADITION
Size A B C D
3/8M x 3/8M 50 70 40 G 3/8
1/2M x 1/2M 54 93 49 G 1/2
3/4M x 3/4M 62 93 53 G 3/4
1M x 1M 72 113 61 G 1
Size A B C D
3/8M x 3/8M 50 49 38 G 3/8
1/2M x 1/2M 54 56 40 G 1/2
3/4M x 3/4M 62 56 44 G 3/4
1M x 1M 72 80 52 G 1
Size A B C D
1/2F x3/4M 78 56 40 G 1/2
3/4F x 1M 80 56 44 G 3/4
1F x 11/4M 95 80 52 G 1
11/4F x 11/4M 115 80 56 G 1 1/4
B
A
C
B
A
C
B
A
C
D
DD D
D
D
QUALITY BY TRADITION
PAG. 7/8
DIMENSIONS
Size A B C D E
1/2F x3/4M 54 56 40 71 G 1/2
3/4F x 1M 63 56 44 75 G 3/4
1F x 11/4M 70 80 48 80 G 1
G Thread (T) ISO 228
Angle mainfoldB
A
D
C
EBB
C
E
Size A B C
1/2F x 1/2F 70 G 1/2 56
3/4F x 3/4F 97 G 3/4 56
1F x 1F 116 G 1 80
G Thread (T) ISO 228Butterfly handle available
Female - female with FILTER - Lever handle
Size A B C
1/2F x 3/4M 78 G 1/2 20
G Thread (T) ISO 228
Mainfold. Square handle
C
A
A
B
HYDRAULIC FEATURES
INSTALATION AND ASSEMBLY
The SENA series has been tested by our laboratory to determine the hydraulic characteristics of flow rate vs losses to European standard EN 1267.
Hold the valve from faces of the hexagons, never from the central part or its neck, that will avoid internal components deformations (in other case valve could be damaged inevitably).
The maximum valve life is obtained with the closure sphere in the full open or close position, it is recommended do not work in intermediate positions for long time periods.
Valve must be maneuver every 3 months, this frequencies must be increased for waters with a French hardness over 50º.
QUALITY BY TRADITION
PAG. 8/8
Av. del Cid, 1646134 | Foios | Valencia | Spain
Engineering departament:Tel: +34 963 171 [email protected]
valvulasarco.com
Every product has an impact on the environment during all stages of its life-cycle, including final disposal. All components of these valves can be recycled, deposit the valve in a green or recycled point when no longer useful.Válvulas ARCO, SL reserves the right to change our products and specifications at any time and without prior notice.
QUALITY BY TRADITION
Loss
of
pres
sure
(ba
r)
Flow (l/sec.)
Flow vs. Loss of pressure
Loss
of
pres
sure
(ba
r)
Flow (l/sec.)
Flow vs. Loss of pressure