SEMPERGUARD ZASTITNE RUKAVICE

6

Click here to load reader

description

ZASTITNE RUKAVICE

Transcript of SEMPERGUARD ZASTITNE RUKAVICE

Page 1: SEMPERGUARD ZASTITNE RUKAVICE

DAILY PROTECTION

PROTECTIVE GLOVESFOR SAFETY AT WORK

Page 2: SEMPERGUARD ZASTITNE RUKAVICE

SEMPERIT Technische Produkte Gesellschaft m.b.H. www.sempermed.com

PROTECTIVE GLOVES FOR SAFETY AT WORKProtective gloves are now essential in many areas of business. Different fields of application make different de-mands on the gloves. Whether for hygienic reasons; as protection against injury or skin irritation due to aggressive substances such as chemicals, dirt, grease, oils, paints etc.– Semperguard® gloves provide optimum skin protec-tion. To provide optimum protection for the health and safety of users, in the EU, Directive 89/686 specifies the basic requirements for PPE (personal protective equipment).

Depending on the risk against which they are intended to provide protection, PPE is divided into three categories:

Category I: Protection against slight risks (simple PPE)For this category, the manufacturer assumes that the user is able to evaluate the potential protection against slight risks and will notice if the barrier effect has reduced in good time.Category I includes PPE for protection against:Mildly aggressive cleaning agents (protective gloves for diluted cleaning solutions).However, they are not intended to provide protection against (aggressive) chemicals.

Category II: Protection against moderate risksThis includes all PPE which is not included in Category I or Category III.

Category III: Protection against lethal hazards or serious and irreversible damage to health (complex PPE)In this case, the manufacturer assumes that the user cannot recognise the immediate effect in good time, e.g. in the case of penetration of hazardous chemicals.Complex PPE with regard to protective gloves includes PPE, which only provides protection against the effects of chemicals for a limited period. Semperguard® protective gloves are tested for handling a wide range of chemicals* and most are certified as Category III PPE products.

Page 3: SEMPERGUARD ZASTITNE RUKAVICE

COmPARISON OF mATERIALS Due to the various protection requirements for the particular work, it is especially important to know about the properties of the materials in order to select the right product. Sempermed recommends the use of nitrile gloves, as these have good mechanical properties and are resistant to chemicals, so that they are especially suitable for use in a large number of industrial protection applications.

+Robust and comfortable to wear

Protection against grease, oils and other skin irritants

Excellent elasticityVery comfortable to wear

Good resistance to common chemi-cals* (acids, alkalis, salt solutions)

Suitable for minor hygienic applica-tions with no particular mechanical stress

–Can cause allergieswith sensitive skin

Less resistant to fats and oils

Low mechanicalresistance

NITRILE LATEX VINYL

* According to the Chemical Resistance List (www.sempermed.com)

Page 4: SEMPERGUARD ZASTITNE RUKAVICE

SEMPERIT Technische Produkte Gesellschaft m.b.H. www.sempermed.com

STANDARDS AND PICTOGRAmS

PERMEATIon:The pictogram with a beaker stands for waterproof gloves and slight protection against chemical haz-ards. It confirms that the glove has been tested for the penetration of certain chemicals.

PEnETRATIon:The pictogram for protection against bacteriologi-cal contamination states whether the glove is free of holes and therefore is proof against micro-organisms according to the definition in the standard. It is tested at AQL level during production.

MECHAnICAL RESISTAnCE:Standard En 388 is primarily relevant for reusable protective gloves. It specifies the resistance of the glove for various hazards (mechanical risks) and for better indication it categorises 4 different features in

performance levels (wear, cutting, tearing and stab protection).

CE MARk:Products with the CE mark comply with the currently valid EU safety regulations, which in this case means compliance with the PPE Directive, which in turn is mandatory for this labelling.

In the EU, there are a large number of standards for gloves which are labelled as PPE. The basis is En 420, which defines the general requirements for protective gloves, e.g. the contents of the information for users, the safety of the glove material, as well as the characteristics of the product (e.g.: length, size, etc.). In combination with En 420, standard En 374 also applies.

Category I: Protection against minimal risks

Category II: Protection against moderate risks

Category III: Protection against complex risks

PPE Cat. I-III – The requirements for personal protective equipment are regulated by EU Directive 89/686/EEC, in order to guarantee the health and safety of the user.

En374

En374

En388

Page 5: SEMPERGUARD ZASTITNE RUKAVICE

ChemiCal resistanCe list Break-through time according to EN 374-3 in minutes

CHEMICAL (SYNONYMS)SEMPERGUARD®

LATEX ComfortSEMPERGUARD®

LATEX PF ICSEMPERGUARD®

Nitril XpertSEMPERGUARD®

Nitril ComfortSEMPERGUARD®

Nitril Xtra Lite/Style

Acetone (2-propane, ketone propane) X X X X X

Acetonitrile (methyl cyanide, ethane nitrile) X X X X X

Acrylamide (40%) (acrylic acid amide) Level 6 Level 6 Level 6 Level 6

Ammonia (25%) (ammonium hydroxide, liquid ammonia) A A A

Benzalconium chloride liq. (quarternary ammonium compound, quats) Level 6

Petrol (heavy bp 150 – 190° - CAS 8032-32-4) X X X X X

Chlorhexidine digluconate (0.5%)

Chloroform (trichlormethane) X X X X X

Cyclohexanol (hexaline / at 23°C) Level 1 Level 4 Level 3

Dichlormethane (methylene dichloride, freon 30) X X X X X

Diethylamine (DEA) X X X X X

Diethyl-ether (diethyl oxide, ethoxyethane) X X X X X

Dimethyl sulfoxide DMSO (methyl sulfonyl methane) X X X X X

Acetic acid (10%) (methyl carbonic acid) Level 2 Level 2 Level 6 Level 6

Ethanol (20%) (ethyl alcohol, methyl carbinol) A Level 6 Level 6 Level 1

Ethanol (40%) (ethyl alcohol, methyl carbinol) X X Level 1 Level 1 A

Ethanol (70%) (ethyl alcohol, methyl carbinol) X X Level 1 Level 1 A

Ethanol (80%) (ethyl alcohol, methyl carbinol) X X Level 1 A A

Ethanol p.a. (ethyl alcohol, methyl carbinol) X X A

Ethidium bromide (1%) (homidium bromide) X X Level 6 Level 6 Level 6

Ethyl acetate (acetic acid ether) X X A A X

Hydrofluoric acid (40%) (hydrogen fluoride) Level 1 A

Formaldehyde (37%) in methanol (10%) (formaline, formic acid aldehyde) Level 1 Level 6 Level 3 Level 1

Glutaraldehyde (5%) (pentane-1,5- dial, glutaral) Level 6 Level 6 Level 6 Level 6

Isopropyl alcohol (40%) (2-propanol, isopropanol, IPA) A A Level 1 Level 1 Level 1

Isopropyl alcohol (70%) (2-propanol, isopropanol, IPA) A A Level 1 Level 1 Level 1

Isopropyl alcohol p.a. (2-propanol, isopropanol, IPA) X A Level 1 Level 1

Potassium hydroxide (30%) (caustic potash) Level 1 Level 6 Level 6 Level 6

Linseed oil

Methanol 5% (methyl alcohol, carbinol) Level 6

Methanol p.a. (methyl alcohol, carbinol) X X A A X

Sodium hydroxide (30%) (caustic soda, caustic soda solution) Level 4 Level 6 Level 6 Level 6 Level 6

Sodium hydroxide (40%) (caustic soda, caustic soda solution) Level 4 Level 6 Level 6 Level 6 Level 6

n-heptane (CAS 142-82-5) X X A X X

n-hexane (CAS 110-54-3) X X A A A

Phenol (10%) (carbolic acid, hydroxybenzol) A Level 2 A A

Phenol (80%) (carbolic acid, hydroxybenzol) Level 2 A A

Phosphoric acid (30%) (orthophosphoric acid) Level 6 Level 6 Level 6

Nitric acid (10%) Level 6 Level 6 Level 6 Level 6 Level 6

Nitric acid (36%) Level 6 Level 4 Level 6

Nitric acid (50%) A Level 4 A A

Hydrochloric acid (36%) A Level 1 Level 3 Level 2 A

Sulphuric acid (96%) (vitriol, dihydrosulphate) Level 1 Level 1 A

Toluol (methyl benzol, toluene, phenyl methane) X X X X X

Trichlorethane (methylene chloroform, vinyl trichloride) X X X X X

Xylol (dimethylbenzol, xylene) X X X X X

The following table shows an overview of the most commonly used Semperguard® disposable gloves and the most frequently required chemical resistances.

Not recommendedA: only recommended for splash protection - change gloves immediately after contactLevel 1: recommended for short contact (from 10 to 30 min)Level 2: for applications from 30 to 60 min

Level 3: for applications from 60 to 120 minLevel 4: applications from 120 to 240 minLevel 5: for applications from 240 to 480 minLevel 6: for applications over 480 min*

* Higher measurement values not available

Page 6: SEMPERGUARD ZASTITNE RUKAVICE

Vers

ion

1 6/

2013

DM

2991

132

DisPOsaBle GlOVes

Product nameSemperguard®

Nitril XpertSemperguard®

Nitril ComfortSemperguard®

Nitril Xtra LiteSemperguard®

Style Semperguard®

Latex powderfree ICSemperguard® Latex Comfort

Semperguard®

Latex powderedSemperguard®

Vinyl

Product characteristics

ROBUST NITRILE• Signal colour blue

(HACCPP standard)• Greater thickness• Greater resilience• Good chemical

resistance*• Silicone-free

COMFORTABLE NITRILE• Signal colour

blue (HACCP standard)

• Extremely comfortable to wear

• Good chemical resistance*

LIGHTWEIGHT NITRILE• Lavender

blue, offering compliance with HACCP standards

• Excellent elasticity

• Skin-friendly

BLACK NITRILE• Black• Excellent

elasticity• Especially

suitable for applications which are visible to the public

THE ALL-ROUND-ER• Natural• Inner coating• Highly tear-

resistant/excellent elasticity

• Good tactility/very comfortable to wear

COMFORTABLE LATEX• Natural• Chlorinated• Excellent

elasticity• Good tactility/

very comfortable to wear

THE POWDERED OPTION• Natural• Powdered• Easy to put on -

even with moist hands

• Excellent value for money

SKIN-FRIENDLY• Transparent and

signal colour blue (HACCP standard)

• No latex proteins or accelerators

• Free from DOP• For handling fat-

free foods

Material Nitrile Nitrile Nitrile Nitrile Natural latex Natural latex Natural latex Vinyl

Interior Powder-free Powder-free Powder-free Powder-free Powder-free Powder-free Powdered Powdered/powder-free

Exterior Textured Textured fingers Textured fingers Textured fingers Textured Textured fingers Textured fingers Smooth

Length Median 240 mm Median 240 mm Median 240 mm Median 240 mm Median 240 mm Median 240 mm Median 240 mm Median 240 mm

Thickness(double) 0.26 mm 0.20 mm 0.14 mm 0.14 mm 0.24 mm 0.20 mm 0.20 mm 0.15 mm

MD classification

CE Class I CE Class I CE Class I CE Class I CE Class I CE Class I

PPE PPE category IIIComplex risks

PPE category IIIComplex risks

PPE category IIIComplex risks

PPE category IIIComplex risks

PPE category IIIComplex risks

PPE category IIIComplex risks

PPE category IIIComplex risks

PPE category IMinimal risks

All protective gloves in the Sem-permed product range are of very high quality and have been tested in ac-cordance with the specified standards.

PLEASE CONTACT US.

Semperit Technische Produkte Gesellschaft m.b.H. . Segment SempermedAustria. 1031 Vienna . Modecenterstr. 22 . Tel.: +43 1 79 777-0 . Fax: +43 1 79 777-630 e-mail: [email protected] . www.sempermed.com

reusaBle PrOteCtiVe GlOVes

Product name Semperstar Sempersoft Semperplus Sempervelvet Sempertip Semperfit

Productcharacteristics

SKIN-FRIENDLY

• Phthalate-free• Extra thickness for

greater safety• Good chemical

resistance

COMFORTABLE VINYL

• Phthalate-free• Particularly skin-

friendly• Extremely com-

fortable to wear

ROBUSTNITRILE• Latex-free• Extra length for

greater protection

THE ALL-ROUNDER

• Flocklined• Rolled edge for

better drip protec-tion

LIGHTWEIGHT

• Flocklined• Good grip in wet

environments

SAFETY

• Easy to put on, thanks to synthetic lining

• Rolled edge for better drip protec-tion

Material Vinyl Vinyl Nitrile Natural latex Natural latex Natural latex

Interior Flocklined with cotton

Flocklined with cotton

Flocklined with cotton

Flocklined with cotton

Flocklined with cotton No flocklining

Exterior Structured Structured Diamond pattern Honeycomb pattern

Honeycomb pattern

Honeycomb pattern

Length Median 320 mm Median 320 mm Median 330 mm Median 300 mm Median 300 mm Median 300 mm

Thickness(single) 0.6 mm 0.5 mm 0.38 mm 0.45 mm 0.40 mm 0.40 mm

PPEPPE category III

Complex risks

PPE category III

Complex risks

PPE category III

Complex risks

PPE category III

Complex risks

PPE category I

Minimal risksPPE category IIIComplex risks

imPOrtant nOte: At the time of printing, all of the listed Semperguard® protective gloves comply with the specified standards and EU directives. The latest product brochures can be found at www.sempermed.com. Failure to observe this information, in particular with regard to (chemical) resistance, frequency of use and tolerability of the gloves, can result in personal injury and/or material damage. Semperit does not accept any liability for incorrect use of the gloves. In case of doubt, obtain expert advice before use. The information and classification correspond to the latest status prior to printing. Subject to mistakes, printing errors and amendments.CautiOn: Natural latex can cause allergic reactions, including anaphylactic shock.

*see chemical resistance list on www.sempermed.com