Semester 2
description
Transcript of Semester 2
33Semester 2Semester 2
MODULE 3 REVIEWMODULE 3 REVIEW
JEOPARDYJEOPARDY
AcronymsAcronyms PotpourriPotpourri InterfaceInterface A la ModeA la Mode GlobalGlobal
100 100 100 100 100
200 200 200 200 200
300 300 300 300 300
400 400 400 400 400
500 500 500 500 500
ShowShow
100
200
300
400
500
Acronyms100
Acronyms100
CLICLI
What is Command Line Interface?
What is Command Line Interface?
Acronyms 200
Acronyms 200
What is Trivial File Transfer Protocol?What is Trivial File Transfer Protocol?
TFTPTFTP
Acronyms 300
Acronyms 300
What is Domain Name System?What is Domain Name System?
DNSDNS
Acronyms 400
Acronyms 400
What is Message-of-the-day?What is Message-of-the-day?
MOTDMOTD
Acronyms 500
Acronyms 500
What is Virtual Terminal?What is Virtual Terminal?
VTYVTY
Potpourri100
Potpourri100
What is Exit?What is Exit?
This command is used to move from the interface configuration mode to the global
configuration mode.
This command is used to move from the interface configuration mode to the global
configuration mode.
Potpourri 200
Potpourri 200
What is End? (also Ctrl-Z)What is End? (also Ctrl-Z)
This command exits from any configuration mode back to privileged
EXEC mode.
This command exits from any configuration mode back to privileged
EXEC mode.
Potpourri 300
Potpourri 300
What is Shutdown?What is Shutdown?
The command to disable an interface.The command to disable an interface.
Potpourri 400
Potpourri 400
Where is NVRAM?Where is NVRAM?
The command copy running-config startup-config stores a backup configuration file here.
The command copy running-config startup-config stores a backup configuration file here.
Potpourri 500
Potpourri 500
What is This router must be on TODAY?What is This router must be on TODAY?
The result of the following command:
banner motd This router must be on TODAY!
The result of the following command:
banner motd This router must be on TODAY!
Interface100
Interface100
What is ip address <ip address> <netmask>?
What is ip address <ip address> <netmask>?
Enter this command to assign an address to an interface.
Enter this command to assign an address to an interface.
Interface200
Interface200
What is no shutdown?What is no shutdown?
Enter this command to enable an interface.
Enter this command to enable an interface.
Interface300
Interface300
What is clock rate 56000?What is clock rate 56000?
Enter this command to set a DCE serial port’s signaling rate.
Enter this command to set a DCE serial port’s signaling rate.
Interface400
Interface400
What is the description command?What is the description command?
This command allows one to clearly identify an interface.
This command allows one to clearly identify an interface.
Interface500
Interface500
What is interface serial 0? (or interface serial 0/0)
What is interface serial 0? (or interface serial 0/0)
From global configuration mode, this command allows one to configure a
router’s first serial interface.
From global configuration mode, this command allows one to configure a
router’s first serial interface.
A la Mode100
A la Mode100
What is Global configuration mode?What is Global configuration mode?
Chicago(config)#Chicago(config)#
A la Mode200
A la Mode200
What is privileged EXEC mode?What is privileged EXEC mode?
Bora#Bora#
A la Mode300
A la Mode300
What is Router configuration mode?What is Router configuration mode?
Quito(config-router)#Quito(config-router)#
A la Mode400
A la Mode400
What is Line configuration mode?What is Line configuration mode?
La_Paz(config-line)#La_Paz(config-line)#
A la Mode500
A la Mode500
What is Interface configuration mode?What is Interface configuration mode?
Quebec(config-if)#Quebec(config-if)#
Global 100
What is configure terminal?What is configure terminal?
Enter this command to edit a router’s configuration.Enter this command to edit a router’s configuration.
Global 200
Global 200
What is hostname?What is hostname?
Enter this command to name a router.Enter this command to name a router.
Global 300
Global 300
What is enable secret?What is enable secret?
Enter this command to set an encrypted password.
Enter this command to set an encrypted password.
Global 400
Global 400
What are:
password <cisco>
login
What are:
password <cisco>
login
From the Router(config-line)# prompt, enter these two lines to allow remote
login.
From the Router(config-line)# prompt, enter these two lines to allow remote
login.
Global 500
Global 500
What is ip host <device name> <ip address>?
What is ip host <device name> <ip address>?
Use this command to add a manual entry into a host table.
Use this command to add a manual entry into a host table.
Show 100
What is show running-configuration?What is show running-configuration?
You need to view the current configuration.You need to view the current configuration.
Show 200Show
200
What is show interfaces?What is show interfaces?
You need to view how much data has passed through all router ports.
You need to view how much data has passed through all router ports.
Show 300Show
300
What is show interface serial 0/1?What is show interface serial 0/1?
You need to view statistics only for serial 0/1.
You need to view statistics only for serial 0/1.
Show 400Show
400
What is show protocol?What is show protocol?
You need to view the status of IP, IPX, and Appletalk.
You need to view the status of IP, IPX, and Appletalk.
Show 500Show
500
What is show startup-configuration?What is show startup-configuration?
You need to view what the router configuration will be after the router has
been power cycled.
You need to view what the router configuration will be after the router has
been power cycled.