SEMA New Products
-
Upload
catherine-page -
Category
Automotive
-
view
114 -
download
0
Transcript of SEMA New Products
Rigid Industries®New Products Being Launched At
SEMA 2014
Rigid’s New RDS-Series® Grille Kits
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
•Made with 2 piece, 16 gauge, custom laser-cut 304 stainless steel; no welds
•Finished with a high quality powder coat finish•304 stainless steel hardware included for secure installation•2 slots for mounting positions of the RDS Light Bar. This
ensures the best placement of the light bar and gives you a clean look to fit the contour of the grille
•Includes the ONLY PATENTED Radius Light Bar on the Market; U.S. Patent #D713,574 S•Grille Emblem included•Limited Lifetime Warranty
OEM RDS Grille Kits• 2011-2013 Ford® F250®/350® RDS Grille & 30” RDS Light Bar• 2013-2014 Ford F150® RDS Grille & 30” RDS Light Bar
• 2009-2015 Ford Raptor® RDS Grille (w/camera) & 30” RDS Light Bar• 2009-2015 Ford Raptor RDS Grille (no camera) & 30” RDS Light Bar• 2009-2012 Dodge® RAM® 1500 RDS Grille & 30” RDS Light Bar• 2010-2012 Dodge RAM 2500/3500 RDS Grille & 20” RDS Light Bar• 2013-2014 Dodge RAM 2500/3500 RDS Grille & 30” RDS Light Bar
• 2013-2014 Dodge RAM 1500 Grille & 30” RDS Light Bar• 2011-2013 GMC® 1500 RDS Grille & 20” RDS Light Bar
• 2011-2014 GMC 2500/3500 RDS Grille & 20” RDS Light Bar• 2015 GMC Yukon RDS Grille & 30” RDS Light Bar
• 2015 GMC 2500/3500 RDS Grille & 30” RDS Light Bar• 2015 Chevy® Silverado® 2500/3500 RDS Grille & 30” RDS Light Bar
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
OEM RDS Grille Kits
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
Rigid Industries Jeep® JK Grille2007-2014 Jeep JK Grille fits a 20” E-Series
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
New Rigid Industries OE Mounts2013.5-2014 KTM® Mount
2014 Chevy Silverado 1500 Fog Light Mount
Arctic Cat® Wildcat® Sport Mount
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
Dually XL™ and Dually XL2™
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
• New form factor which provides either 9 LEDs with the Hybrid Optics or 12 LEDs with the Specter® Optics
• Die cast housing and bezel
• Bulkhead plug (no pigtail) which is a more compact design
• Standard U bracket with rubber isolator
• Pricing is comparable to the E-4”, but the Dually XL is square
• Dually XL is offered in the Hybrid Spot, Hybrid Flood, Hybrid Diffused; the Dually XL2 is offered in the Specter® Driving, Specter Diffused and Hyperspot™. Not offered in Specter Wide.
Size comparison of standard D2® and Dully XL2
• *Also available in Marine
New 2 Piece SR® and SR2® Series• Available in 6” and 10” SR and
SR2 light bars• 2 piece cast design• Reasons for change: ease of
manufacturing, ease of assembly and better reliability
• With 2 piece design, less can go wrong and maintaining the IP68 and IP69K Certification is easier
• New vertical heat sink for better cooling
*Also available in Marine
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
R-Series® • Rigid’s first round light• Available in all standard optic
configurations and combos; Hybrid Spot & Flood; Specter Driving & Wide and Hyperspot
• Die cast housing• Oversized heat sync• Integrated plug; no pigtail• U bracket mount to provide great
adjustability• Injection molded polycarbonate lens,
which allows it to have a dome shape; UV and scratch resistant
• Designed as a PAR46 retro fit, for direct replacement of Unity Light on police cars
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
*Also available in Marine
E-Mark Certified Lighting SolutionsRigid industries is proud to announce
the certification of our U.S. manufacturing facility to comply
with the stringent E-Mark regulations in Europe. E-Mark
certification allows Rigid Industries to both manufacture and sell E-Mark
certified products. E-Mark certification allows our lights to be
used on the road in European countries that follow E-Mark
regulations. Rigid Industries is one of the few U.S. lighting
manufacturers that have received E-Mark certification.
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
Rigid’s SAE Approved Lighting
• Available in a D-Series® SAE Fog Light and an E-Series® 6” SAE Auxiliary Drive Light
• Fog light is SAE583 certified and the driving light is SAEJ581 certified
• Lenticular lens that spreads the light horizontally with no spill light; very focused thin beam
• Only sold in sets; pair harness and switch included
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
Rigid Industries DC Scene Lighting• New, white polished
polycarbonate reflector, which provides 98% reflectivity
• No optics, just 9 straight LEDs which provide 9K raw lumens
• No loss of intensity of the LED’s• Very big and wide spreading beam;
120°spread; compared to our diffused lens, which provides a 60°spread
• No pigtail or plug; hardwire into application; Marine has a pigtail
• 2 options to choose from: Q-series™ and E 10” form factors
• Q-Series comes with bracket mount and E-Series™ comes with cradle mount
• Also available in Marine
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
12
High/Low Lights
• Specter Driving Optic• Available in D2, E2® 4” & 6”, SR2®
4” & 6”, SR-M2® and SR-Q2®• High = Standard high output• Low = 20% drive current; doesn’t
correlate to 20% output, but close and you still have a significant amount of light
• Standard harness with a 3rd wire and a 3 position switch: Off/High/Low
• SR-M2 and SR-Q2 are available in Marine
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
Rigid’s Amber/White E-Series
Rigid’s Amber/White E-Series is available in sizes 20”-50”. It is a
standard E-Series Hybrid Spot/Flood Combo light, however one row is
White and the other row is Amber. Perfect for markets where people
are driving in snow or dust and need the ability to switch between the
two colors. Includes a 3 wire harness and a 3 position switch for
Off, White and Amber.
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
Docking Light
• 316 Polished Stainless Steel• Primary light is an SRM and an A-
Series light is the secondary light on the rear
• Surface mount has holes in the housing, so it can be mounted externally
• Stealth Mount which has no visible hardware on the face; light is mounted from the inside of the hull of the boat
• Available in pairs only
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
MIL-STD-461F Lights
• Compliant with MIL-STD-461F RFI (Radio Frequency Interference), mostly an issue for military, law enforcement and airport customers
• Circuit board is what makes the difference; otherwise they are standard D2 Driving, Wide or Diffused and E 6” & 10” Spot, Flood or Combo
• All black brackets and hardware
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com
Thank You
779 N Colorado St, Gilbert, AZ 85233P: 480.655.0100 / www.rigidindustries.com