Self-Service Administration in Exchange Online Dedicated...

Exchange Online Dedicated Self-Service Administration Feature Guide- Exchange Server 2010

Office 365 Dedicated & ITAR-Support Plans

Revised: March 19, 2014

© 2014 Microsoft Corporation. All rights reserved.

Self-Service Administration in Exchange Online Dedicated

– Exchange Server 2010

IT Professional & Customer Service Desk Feature Guide

Self-Service Administration for Exchange Online Dedicated – Exchange Server 2010 © 2014 Microsoft Corporation. All rights reserved.

2

The information contained in this document represents the latest available subject matter available to Microsoft

Corporation as of the date of publication. Since Microsoft must respond to changing market conditions, this document

should not be interpreted as a commitment of any type on the part of Microsoft. Further, Microsoft cannot guarantee

the accuracy of any information presented after the date of publication.

The content of this document is proprietary and confidential. The material is intended only for customers of the

dedicated and ITAR-support plans of Office 365 for enterprises. This content is provided to you under a Non-Disclosure

Agreement and cannot be distributed without the express written permission of Microsoft Corporation. Complying with

all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this

document may be reproduced, stored in, or introduced into, a retrieval system or transmitted in any form or by any

means (electronic, mechanical, photocopying, recording, or otherwise) or for any purpose without the express written

permission of Microsoft Corporation.

Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering

subject matter in this document. Except as expressly provided in any written license agreement from Microsoft; the

furnishing of this document does not give you any license to these patents, trademarks, copyrights, or any other

intellectual property. Reference http://www.microsoft.com/permission for additional information.

Descriptions in this document of the products of other companies, if any, are provided only as a convenience. Such

references should not be considered an endorsement of a product by Microsoft nor as an indication of support

provided by Microsoft for a third party product. Microsoft cannot guarantee the accuracy of the third party references

since product offerings of these companies may change over time. In addition, the descriptions are intended to be brief

highlights to aid understanding rather than as thorough subject matter coverage. For authoritative descriptions of

these third party products, please consult their respective manufacturer.

MICROSOFT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, IN THIS DOCUMENT.

Microsoft and Windows are either registered trademarks of Microsoft Corporation in the United States and/or other

countries. The names of actual companies and products mentioned herein may be the trademarks of their respective

owners.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical,

without the expressed written permission of the Microsoft Corporation.

© 2014 Microsoft Corporation. All rights reserved.

http://www.microsoft.com/permission


3

About this guide 4

Overview 4

What’s New in Self-Service Administration 4

Glossary of Terms Used in this Document 5

What is self-service administration? 6

Establishing a self-service administration environment 9

Client System Configuration for Windows PowerShell 9

Authorizing Support Personnel to use Windows PowerShell or ECP 10

Administration Functions and Required Security Groups 11

Connecting Windows PowerShell Session to Exchange Online 15

Getting Help in Windows PowerShell 17

Exchange Control Panel 18

Users & Groups 18

Mail Control 19

Phone & Voice 19

Getting Help in Exchange Control Panel 19

Appendix A: Windows PowerShell cmdlets & parameters 20

Default Feature Role Groups 21

Audit Reporting Mailbox 21

DDG Management 21

EAS Policy Editor 23

EAS User Settings 26

EAS Wipe Device 27

EWS Application Impersonation 28

Limited Recipient Management 28

Mail Tips Author 34

Mailbox Permissions 35

Mailbox Search 38

Message Tracking 39

Protocol Control 39

RBA Settings 42

Receive Connector VO 43

Search & Destroy 44

Transport Rules 45

User MRM Management 48

VO Admin 50

Optional Feature Role Groups 55

Litigation Hold 55

MyMailboxDelegation 56

UM Management 56

Appendix B: Exchange Control Panel administration features 62


4

About this guide

Overview

This document introduces the concept of self-service administration within the dedicated and ITAR-support plan

offerings of Exchange Online. The following topics are described:

An overview of self-service administration

How self-service administration is configured and managed to support Exchange Online

How to connect to an Exchange Online environment to use Windows PowerShell and the Exchange Control

Panel (ECP) to perform administration tasks

A summary of Role-Based Access Control (RBAC) administrative groups, their corresponding Windows

PowerShell cmdlets and parameters, and the ECP feature set available for self-service administration

Specific feature guides to available which describe detailed information and examples for self-service

administration

The Self-Service Administration Feature Guide is for IT Professionals and Service Desk personnel that support the

Exchange 2010 release of Exchange Online.

Note

Self-service administration for default Exchange Online features is configured at the time of a

customer transition to Office 365 and when Exchange Online release updates become available;

configuring self-service functionality for optional Exchange Online features may require customer

engagement with Microsoft Deployment teams.

What’s New in Self-Service Administration

Functionality updates and cmdlet and/or parameter updates have been added to several existing role groups within

the self-service administration model for Exchange Online Dedicated. All changes have been noted in the role group

tables shown in Appendix A: Windows PowerShell cmdlets & parameters. Also added to the Universal Group and

Role Group is guidance for the EWS Application Impersonation cmdlet.


5

Glossary of Terms Used in this Document

The table below contains a list of common terms used throughout this module. These terms are specific to

management concepts and may not be specific to Exchange Server 2010 or Exchange Online.

Term Definition

Service Desk

Support staff personnel within a customer organization that service requests for assistance with

issues related to messaging. Service Desk staff are generally responsible for mailbox recipient

management tasks.

Organization An Exchange organization is a collection of Exchange servers that provide messaging services,

bound by an identifying namespace.

RBAC Role Based Access Control – the new model used by Exchange 2010 to limit access to a

management task based on a role definition that requires that task.

Windows

PowerShell An extensible command-line shell and associated scripting language from Microsoft.

Cmdlet

Pronounced "command-let", this is the smallest unit of functionality in Windows PowerShell.

Cmdlets resemble built-in commands found in other execution shells, for example, the dir

command found in a Command Prompt window. Like these familiar commands, cmdlets can be

called directly from the command line in Windows PowerShell and run under the context of the

shell rather than as a separate process.


6

What is self-service administration? Self-service administration allows administrators to manage their Exchange Server environment within Exchange Online

Dedicated without having to contact Microsoft Online Services Support to assist with common administrative tasks.

With Exchange Server 2010, three self-service administration options are available: the command line oriented

Windows PowerShell, the menu driven Exchange Control Panel (ECP), and the Customer Management Portal

(CMP) which provides a menu driven interface to provide enhanced administrative capabilities for only Exchange Online

Dedicated and ITAR-support plan customers.

Windows PowerShell can be run on a local computer by IT Professional and Service Desk personnel to remotely

connect to an Exchange Online Dedicated environment and perform management tasks (a feature capability also

referred to as “remote PowerShell”). When a connection is established to the dedicated Exchange Server environment,

cmdlets and exposed parameters for each cmdlet can be executed. Only members of specific Active Directory Universal

Security Groups (USGs) which represent “role groups” within the Role Based Access Control (RBAC) permissions model

of the Exchange Online Dedicated environment are allowed to execute Windows PowerShell cmdlets assigned to a

specific role. RBAC is core functionality of Exchange Server 2010. Remote PowerShell also can be used to create scripts

to automate routine tasks or to perform batch processing.

Through the Web browser based Outlook Web App, the Exchange Control Panel (ECP) provides the ability to perform

select system level administrative functions. ECP also is available to all end users to allow them to perform

administrative tasks within their personal operating environment. Similar to Windows PowerShell, support personnel

added to specific Active Directory security groups will be able to utilize an extended set of system level administrative

commands available within ECP.

The Customer Management Portal (CMP) offers the following extended set of self-service functions for mailbox

administration:

Ability to manage mailbox permissions (i.e., alternate recipients, full mailbox, send-on-behalf, and send-as)

Assisting with the application of mailbox setting changes (e.g., custom e-mail forwarding rules, setting out-of-

office messages, changing conference room settings within resource mailboxes, and recovering deleted

mailbox items)

Performing bulk .pst file exports

The balance of this document will describe the use of Windows PowerShell and ECP. Additional documentation

describing CMP can be found within the Release Documentation and Training Material area of the Office 365

Dedicated & ITAR-support Plans Customer Extranet site – see the Customer Management Portal landing page.

Note

Another administrative tool available within an on-premises Exchange Server 2010 environment is

the Exchange Management Console (EMC) – a graphical user interface snap-in for the Microsoft

Management Console (MMC). The EMC tool is not available within Exchange Online Dedicated.

https://sharepoint.partners.extranet.microsoft.com/sites/MMS%20Knowledge%20Base/Documents/Release%20Documentation.aspx


7

The following table includes examples of Exchange Server administrative scenarios, the role groups containing users

that are allowed to execute administrative commands to address each scenario, and the self-service tool to address the

scenario. Several examples showing the use of remote PowerShell and ECP follow.

Scenario Role Group Tool

1. View/Add/Remove full mailbox or send as permissions Mailbox Permissions Windows PowerShell

2. View Receive connector settings Receive Connector VO Windows PowerShell

3. Create, modify, delete ActiveSync policies EAS Policy Editor

ECP /

Windows PowerShell

4. View, create, or modify a transport rule Transport Rules ECP /

Windows PowerShell

5. Search for a message through the tracking logs Message Tracking

Recipient Admin VO

ECP /

Windows PowerShell

If a user [email protected] requires access to the shared mailbox of the Travel team (scenario #2 in table), this

administrative task can be addressed using the Add-MailboxPermissions cmdlet as shown below.

Add-MailboxPermissions [email protected] -AccessRights FullAccess -User Contoso\john

To view ActiveSync device policies (scenario #3 in table), a Service Desk member could use ECP or Windows PowerShell

as shown in the following examples:

Exchange Control Panel Example: View ActiveSync policies

Using Outlook Web Access, the support team member would select Options (upper right corner drop-down) > See

All Options… (drop-down selection) > Options (upper left corner drop-down) > Manage My Organization (drop-down

selection) > Phone & Voice (left navigation link) > ActiveSync Device Policy (button).

At this level, new policies can be created and existing policies can be deleted.


8

Windows PowerShell Example: View ActiveSync policies

The following Windows PowerShell example retrieves all ActiveSync policies in effect and the output is then

formatted

Get-ActiveSyncMailboxPolicy | format-table –property name

Remote PowerShell cmdlets also are available to create new policies and delete existing policies.

Appendix A of this document lists all of the role groups and their exposed cmdlets for the RBAC roles that exist within

the latest release of self-service administration for Exchange Online Dedicated. Appendix B contains has an overview of

the administrative capabilities exposed via ECP. Included within each appendix is a link to the Exchange Online

Dedicated landing page within the Release Documentation & Training Materials area of the Customer Extranet site

for the dedicated and ITAR-support plans of Office 365. The landing page contains links to topic-specific Feature

Guides which include detailed examples of common self-service administration tasks.

Additional information describing the purpose of, and implementation requirements for, the RBAC model can be found

in the Microsoft TechNet article Understanding Role Based Access Control.

https://sharepoint.partners.extranet.microsoft.com/sites/MMS%20Knowledge%20Base/Release%20Docs/Exchange/Exchange%20Rel%20Docs.htm


http://technet.microsoft.com/en-us/library/dd298183.aspx


9

Establishing a self-service administration environment To utilize Windows PowerShell for system level self-service administration of Exchange Online, the following steps must

be addressed:

1. The Windows Management Framework must be installed.

2. The Windows PowerShell user is authorized within the RBAC model of Exchange Online to execute remote

Windows PowerShell cmdlets for the desired administrative tasks.

3. The fully qualified domain name (FQDN) of the Exchange Server 2010 environment to receive remote

administration within Exchange Online is available to the Windows PowerShell user.

4. TCP port 443 (HTTPS) on the client computer and the remote Exchange Server 2010 is open.

Additional information for each of the above steps is described within this section. The use of ECP by an end user or

support personnel requires the use of a Web browser. Administrative users also must be authorized to execute specific

Windows PowerShell cmdlets within the RBAC model of Exchange.

Client System Configuration for Windows PowerShell

The Windows Management Framework is required to establish remote Windows PowerShell connectivity with

Exchange Online. The Windows PowerShell environment comes preinstalled within Windows 7 and Windows 8

clients and Windows Server 2008 R2 and Windows Server 2012; the latest framework package must be installed for

all other Windows environments. The current release is Windows Management Framework 3.0 and this package is

available in the Microsoft Download Center. System requirements and installation instructions are described on the

Download Center page. The following notes apply to the framework package installation:

1. When performing the installation, Windows PowerShell and WinRM must be selected as features to be

installed. Optionally, the Windows PowerShell Integrated Scripting Environment (ISE) component (a

graphical Windows PowerShell host used to view and write scripts) can be installed.

http://www.microsoft.com/en-us/download/details.aspx?id=34595


10

2. Perform the following to set the Windows PowerShell script

execution policy to allow locally created unsigned scripts and

signed scripts obtained from the Internet to run within the

Windows PowerShell environment:

a. Click Start > All Programs > Accessories > Windows

PowerShell

b. Right-click Windows PowerShell application and

select Run as administrator.

c. In Windows PowerShell, type the command below

followed by ENTER.

Set-ExecutionPolicy RemoteSigned

d. Close Windows PowerShell.

Authorizing Support Personnel to use Windows PowerShell or ECP

Within the on-premises environment of the customer, several Active Directory Universal Security Groups (USGs)

representing role groups of the RBAC model must exist to support self-service administration. The groups will

contain the names of authorized users (administrators or specific users) that have been granted self-service

administration roles within Exchange Online Dedicated. Standard Office 365 Dedicated processes will be followed to

provision the group within the on-premises environment. After the USGs are established, authorized administrators

in the customer organization can grant or revoke group membership for users and/or other security groups using

the same method used to manage the membership list of any other Active Directory security group. Placing a user

in multiple role groups grants this user rights to perform more than one administrative function.

When an Exchange Online Dedicated environment is established, Microsoft provides specific instructions to create

the initial set of USGs in the on-premises environment that are shown in Table 1 below. In Table 2, listed are security

groups which must be added if optional features of Exchange Online Dedicatd are requested by the customer. If an

optional feature is required, a Microsoft Service Delivery Manager can assist with placed a Configuration Request to

activate the feature.

Note

This is the only time when Windows PowerShell will need to be executed as the Administrator.


11

Important: When a new security group is manually created, the prefix format for existing

security groups in your environment must be used per the following:

E2010-MSO Self Service – <security group name> (legacy customers)

or

MSFT SS <security group name> (newer customers)

Examples:

E2010-MSO Self Service – Audit Reporting Mailbox

or

MSFT SS Audit Reporting Mailbox

Administration Functions and Required Security Groups

The tables below describe self-service administration functions and the default and optional Active Directory

security groups required to support the functions in Exchange Online Dedicated. Any new management capabilities

assigned to a role group since the last self-service administration release are shown in yellow. A description of the

exposed cmdlets available to members of each role group is provided in Appendix A: Windows PowerShell cmdlets

& parameters.

Table 1: Administration scenarios and security groups for default Exchange Online Dedicated features

Scenario Name of Active Directory Universal Security Group Description

Mailbox Audit Reporting Audit Reporting Mailbox

Group members have access to the

Mailbox Audit Reporting feature to

search and read mailbox audit logs.

Manage Dynamic

Distribution Groups DDG Management

Group members can create, edit, and

remove Dynamic Distribution Groups

EAS Device Wipe EAS Wipe Device

Exchange ActiveSync (EAS) Device

Wipe enables the Exchange server to

set a mobile phone to delete all data

the next time that the device

connects to the Exchange server

Exchange ActiveSync (EAS)

Policy Management EAS Policy Editor

Group members can create, modify,

and remove an ActiveSync policy and

set organizational configuration

allow/block/quarantine device lists

Mailbox Policy Assignment EAS User Settings Group members can view/change

mailboxes assigned to an EAS policy


12


Impersonation Rights for

Exchange Web Service

Applications

EWS Application Impersonation

Group members (Service Accounts)

will be granted impersonation rights

to all mailboxes in the Exchange

organization for use with Exchange

Web Service applications.

Note: The cmdlet associated with

this role works differently than

normal cmdlets. Members of the

EWS Application Impersonation role

group cannot run the Impersonate-

ExchangeUser cmdlet. The cmdlet

allows a group member to develop

code to impersonate users using

EWS. See support.microsoft.com

article Impersonation rights are not

working in Office 365

Dedicated/ITAR for more

information.

Recipient Management Limited Recipient Management

Group members can perform a select

set of administrative functions

related to the management of

recipient mailbox properties:

Modify junk email rule settings

for a mailbox

Add and remove alternate

recipients

Hide and unhide mailboxes from

the address book

Modify rules quota for a mailbox

View users in environment

Modify external out of office

(OOF) options for a mailbox

View regional settings (time

zone, time format, date and

language settings)

Configure an out of office

message (OOF)

View Outlook Web Access spell

checking settings

View status of cross-forest

relationships associated with

federated sharing.

Manage server-side Inbox rules

View management role

information

http://support.microsoft.com/kb/2932679/en-us




13


MailTips Authoring Mail Tips Author

Group members can edit MailTips for

mailboxes, distribution groups, or

contacts.

Mailbox Permissions Mailbox Permissions

Group members can assign full

mailbox rights to individual

mailboxes

View send as permissions

Modify full access to a mailbox

Modify send-as permissions to a

mailbox

Add and modify folder level

permissions to a mailbox

Add send on behalf rights to a

distribution group

Add send on behalf rights to a

dynamic distribution group

Allow send-on-behalf rights to

be assigned for specific cross-

forest delegate/delegator

scenarios.

Multi-mailbox Search Mailbox Search

Group members can search the

content of mailboxes in an

organization.

Message Tracking Message Tracking Group members can track messages

in the Exchange organization

Client Protocol Control Protocol Control

Group members can enable or

disable each connection protocol for

mailboxes.

Modify Resource Booking

Assistant (RBA) Settings RBA Settings

Group members can modify RBA

settings for resource mailboxes (e.g.,

conference rooms) in bulk without

using Outlook Web Access. Settings

include conference room capacity,

custom resource attribute, calendar

processing.

View Only Rights to

Receive and Send

Connectors

Receive Connector VO

Group members can view receive

and send connector configuration in

the Exchange environment to

validate named IP addresses for relay

functionality.


14


Search and Destroy

Functionality Search & Destroy

Group members will be granted

permission to use the search and

destroy functionality in Exchange

allowing for individual items to be

removed from all mailboxes.

Members of the group also are able

to use self-service cmdlets to

manually restore the contents of a

disconnected mailbox by applying

the contents to an active mailbox.

See the support.microsoft.com article

You can't complete a mailbox restore

in Office 365 dedicated/ITAR for an

overview of how to perfom a self-

service mailbox restore.

Transport Rule Transport Rules

Group members can manage

transport rules, remote domains, and

message classifications.

Messaging Records

Management (MRM)

Policy Assignment

User MRM Management

Group members can manage

message retention policies, managed

folders, and managed content

settings and also manually start/stop

MRM processing.

View-only Recipient

Administration VO Admin

Group members can view properties

of mailboxes in the Exchange

organization, status of cross-forest

relationships associated with

federated sharing, and management

role information.

Table 2: Administration scenarios and security groups for optional Exchange Online Dedicated features

Scenario Name of Active Directory Universal Security Group

(add name to appropriate prefix format) Description

Legal Hold Litigation Hold

Group members can execute

administrative functions for the Legal

Hold feature.

Mailbox Delegation MyMailboxDelegation

Allows non-owners with full mailbox

and write personal information

permission to add delegates.

Unified Messaging UM Management

Group members can execute

administrative functions for the

Unified Messaging feature.

http://support.microsoft.com/kb/2958923

http://support.microsoft.com/kb/2958923


15

Connecting Windows PowerShell Session to Exchange Online

During the deployment phase of Exchange Online, the FQDN to invoke a remote Windows PowerShell session will

be provided by Microsoft to the customer. In addition, the customer and Microsoft will confirm TCP port 443 is open

and accessible within their respective environments. Execute the following steps to establish a remote Windows

PowerShell session:

1. Access the Start folder for Windows PowerShell on the client systems (Start > All Programs > Accessories >

Windows PowerShell) followed by clicking on Windows PowerShell will invoke a local session of the

Windows PowerShell environment.

2. Declare a variable named $cred and sets its value equal to the results of the Get-Credential prompt

(capture of username and password credentials).

$cred = Get-Credential

a. Press ENTER after typing the above

command.

b. When the Get-Credential cmdlet

prompts you for credentials, enter

the credentials to be used to

authenticate with the remote

Exchange Server 2010. The

credentials entered are stored in

the $cred variable.

3. In the next command, a variable named $session is declared and its value is set to a new Windows

PowerShell remote session using the New-PSSession cmdlet with assigned parameters.

$session = New-PSSession -Authentication basic -Credential $cred -ConnectionUri

https://mail.contoso.com/PowerShell/ -ConfigurationName Microsoft.Exchange -AllowRedirection


16

The following is a description of the parameters used with the New-PsSession cmdlet:

Parameter Value Description

- Authentication basic This sets the authentication mode in the new session to basic.

-Credential $cred The new session calls the variable $cred created in step one. It

contains the credentials you previously entered.

-ConnectionUri https://mail.contoso.com/PowerShell

This provides the Fully Qualified Domain Name for the Remote

PowerShell connection using HTTPS. You should replace

mail.contoso.com with your company’s Outlook Web App domain.

-ConfigurationName Microsoft.Exchange Configures the new Windows PowerShell session for Exchange.

-AllowRedirection Allows your PowerShell session to be redirected to the correct

Exchange Online endpoint.

4. The final step in the connection process imports the remote session stored in the variable $session and runs

it in your local console window to establish a remote PowerShell connection with the system specified in the

ConnectionUri string of the New-PSSession cmdlet.

Import-PSSession $session

5. To disconnect from the server-side session that is defined by the $session variable, run the following

command:

Remove-PSSession $session

For additional information regarding this scripting example, see TechNet Blog article Learn How to Manage Remote

PowerShell Sessions. Additional general information describing the use of Windows PowerShell can be found in the

TechNet article Exchange Management Shell Basics. If issues arise with establishing a remote Windows PowerShell

session, a request for assistance can be placed by the customer with Microsoft Online Services Support.

Note: If you close the Windows PowerShell window without disconnecting from the server-side session,

your connection will remain open for 15 minutes. Your account can have only three connections to the

server-side session at one time.

http://blogs.technet.com/b/heyscriptingguy/archive/2011/11/17/learn-how-to-manage-remote-powershell-sessions.aspx

http://blogs.technet.com/b/heyscriptingguy/archive/2011/11/17/learn-how-to-manage-remote-powershell-sessions.aspx

http://technet.microsoft.com/en-us/library/dd351152(EXCHG.140).aspx


17

Getting Help in Windows PowerShell

Within Windows PowerShell, detailed Help topics explaining the purpose of a cmdlet and syntax can be retrieved by

typing the following:

Get-Help <cmdlet>

In the previous section, for example, the Get-Credential cmdlet was used to prompt for credentials. To view

additional information about the Get-Credential cmdlet, the following can be used:

Get-Help Get-Credential

The Get-help command also offers the following options:

Usage examples:

Get-help <command> -examples

For complete cmdlet information:

Get-help <command> -full


18

Exchange Control Panel

The Exchange Control Panel is a new and simplified Web-based

management console targeted for end users, IT administrators, and

specialists. End users can perform a select set of mailbox administration

tasks such as creating inbox rules or configuring mobile access. As members

of specific RBAC role groups, Administrators can use ECP to manage users,

groups, roles, auditing, mail control, and mobile devices.

The Exchange Control Panel (ECP) can be accessed by logging into Outlook

Web App and selecting Options (upper right corner drop-down) > See All

Options… (drop-down selection) > Options (upper left corner drop-down).

The default view in ECP is Manage Myself. Within this view, end-users are able to personalize their Exchange Online

experience by changing the look or behavior of features such as language settings, message options, and calendar

options. Users who are members of the security groups authorized to invoke system level administrative commands

within the Exchange Online environment have access to extended ECP functionality.

In the upper left corner of the ECP user interface, the Manage Myself drop-down

can be used to expose administrative options capable of being applied at the

organizational level (My Organization) or for another user (Another User).

For the My Organization view, ECP displays the organizational level views

illustrated below. Each view has a series of intuitive optional selections to allow

specific administrative tasks to be completed.

Users & Groups

Clicking Users & Groups provides the

ability to manage the following

organizational level areas:

Mailboxes

Distribution Groups

External Contacts


19

Mail Control

Clicking Mail Control provides the

ability to manage the following

organizational level areas:

Rules

Journaling

Discovery

Delivery Reports

Phone & Voice

Clicking Phone & Voice provides

the ability to manage the

following organizational level

areas:

ActiveSync Access

ActiveSync Device

Policies

Getting Help in Exchange Control Panel

Clicking the Help icon in ECP provides context-sensitive Help information for the section of ECP currently being

accessed.

Note: The Roles & Auditing functions of the on-premises version of Exchange Control Panel are not

available within the dedicated and ITAR-support plan versions of Exchange Online. To perform an audit of

a mailbox to investigate unexpected updates or deletions from a mailbox, refer to Microsoft Support

article How to investigate missing or unexpectedly updated mailbox items by using mailbox audit logging

in Office 365 dedicated.

http://support.microsoft.com/kb/2792663/EN-US

http://support.microsoft.com/kb/2792663/EN-US


20

Appendix A: Windows PowerShell cmdlets & parameters Links to all of the available default and optional self-service administration role groups, their associated cmdlets, and

their exposed parameters within Exchange Online Dedicated are provided below. The groups described apply to the

use of remote Windows PowerShell and the Exchange Control Panel. Included, where applicable, are Common

Parameters (e.g., Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer and

OutVariable) for remote PowerShell. All cmdlet additions for the latest self-service administration update are

highlighted in yellow and deletions are shown in blue.

Notes For security and implementation constraint reasons, not all parameters described within the TechNet reference articles for a cmdlet are exposed to the RBAC defined roles of Exchange Online.

See the Authorizing support personnel to use Windows PowerShell or ECP section for a description of the prefix format to use with each security group name shown below when the group is applied to the on-premises Active Directory environment.

Self-service administration details for specific Exchange Online features can be found in a corresponding Feature Guide held within the Release Documentation & Training Materials area of the Customer Extranet site for dedicated & ITAR-support plan customers – see links on the Exchange Online Dedicated landing page.

Default Feature Role Groups Optional Feature Role Groups

Audit Reporting Mailbox

DDG Management

EAS Policy Editor

EAS User Settings

EAS Wipe Device


Limited Recipient Management

Mail Tips Author

Mailbox Permissions

Mailbox Search

Message Tracking

Protocol Control

RBA Settings


VO Admin

Search & Destroy

Transport Rules

User MRM Management

Litigation Hold

MyMailboxDelegation

UM Management



21

Default Feature Role Groups

Audit Reporting Mailbox

Cmdlet Parameters

New-MailboxAuditLogSearch {Confirm, Debug, DomainController, EndDate, ErrorAction, ErrorVariable, ExternalAccess, LogonTypes, Mailboxes, Name, OutBuffer, OutVariable, ShowDetails, StartDate, StatusMailRecipients, Verbose, WarningAction, WarningVariable, WhatIf}

Search-MailboxAuditLog {Debug, DomainController, EndDate, ErrorAction, ErrorVariable, ExternalAccess, Identity, LogonTypes, Mailboxes, OutBuffer, OutVariable, ResultSize, ShowDetails, StartDate, Verbose, WarningAction, WarningVariable}

Return to list

DDG Management

Cmdlet Parameters

Get-ADServerSettings {Debug, ErrorAction, ErrorVariable, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-DistributionGroup

{Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, ManagedBy, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}

Get-DistributionGroupMember {Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity, IgnoreDefaultScope, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Verbose, WarningAction, WarningVariable}

Get-DomainController {Credential, Debug, DomainName, ErrorAction, ErrorVariable, Forest, GlobalCatalog, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-DynamicDistributionGroup

{Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, ManagedBy, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}

Get-OrganizationalUnit {Debug, DomainController, ErrorAction, ErrorVariable, Identity, IncludeContainers, OutBuffer, OutVariable, SingleNodeOnly, Verbose, WarningAction, WarningVariable}

New-DynamicDistributionGroup

{Alias, ArbitrationMailbox, ConditionalCompany, ConditionalCustomAttribute1, ConditionalCustomAttribute10, ConditionalCustomAttribute11, ConditionalCustomAttribute12, ConditionalCustomAttribute13, ConditionalCustomAttribute14, ConditionalCustomAttribute15, ConditionalCustomAttribute2, ConditionalCustomAttribute3, ConditionalCustomAttribute4, ConditionalCustomAttribute5, ConditionalCustomAttribute6, ConditionalCustomAttribute7, ConditionalCustomAttribute8, ConditionalCustomAttribute9, ConditionalDepartment, ConditionalStateOrProvince, Confirm, Debug, DisplayName, DomainController, ErrorAction, ErrorVariable, IncludedRecipients, ModeratedBy, ModerationEnabled, Name, OrganizationalUnit, OutBuffer, OutVariable, PrimarySmtpAddress, RecipientContainer, RecipientFilter, SendModerationNotifications, Verbose, WarningAction, WarningVariable, WhatIf}


22

DDG Management

Cmdlet Parameters

Remove-DynamicDistributionGroup {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, IgnoreDefaultScope, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Set-ADServerSettings

{ConfigurationDomainController, Confirm, Debug, ErrorAction, ErrorVariable, OutBuffer, OutVariable, PreferredGlobalCatalog, PreferredServer, RecipientViewRoot, RunspaceServerSettings, SetPreferredDomainControllers, Verbose, ViewEntireForest, WarningAction, WarningVariable, WhatIf}

Set-DynamicDistributionGroup

{AcceptMessagesOnlyFrom, AcceptMessagesOnlyFromDLMembers, AcceptMessagesOnlyFromSendersOrMembers, Alias, BypassModerationFromSendersOrMembers, ConditionalCompany, ConditionalCustomAttribute1, ConditionalCustomAttribute10, ConditionalCustomAttribute11, ConditionalCustomAttribute12, ConditionalCustomAttribute13, ConditionalCustomAttribute14, ConditionalCustomAttribute15, ConditionalCustomAttribute2, ConditionalCustomAttribute3, ConditionalCustomAttribute4, ConditionalCustomAttribute5, ConditionalCustomAttribute6, ConditionalCustomAttribute7, ConditionalCustomAttribute8, ConditionalCustomAttribute9, ConditionalDepartment, ConditionalStateOrProvince, Confirm, CustomAttribute1, CustomAttribute10, CustomAttribute11, CustomAttribute12, CustomAttribute13, CustomAttribute14, CustomAttribute15, CustomAttribute2, CustomAttribute3, CustomAttribute4, CustomAttribute5, CustomAttribute6, CustomAttribute7, CustomAttribute8, CustomAttribute9, Debug, DisplayName, DomainController, EmailAddresses, EmailAddressPolicyEnabled, ErrorAction, ErrorVariable, ExpansionServer, ExtensionCustomAttribute1, ExtensionCustomAttribute2, ExtensionCustomAttribute3, ExtensionCustomAttribute4, ExtensionCustomAttribute5, ForceUpgrade, GrantSendOnBehalfTo, HiddenFromAddressListsEnabled, Identity, IgnoreDefaultScope, IncludedRecipients, MailTip, MailTipTranslations, ManagedBy, MaxReceiveSize, MaxSendSize, ModeratedBy, ModerationEnabled, Name, Notes, OutBuffer, OutVariable, PhoneticDisplayName, PrimarySmtpAddress, RecipientContainer, RecipientFilter, RejectMessagesFrom, RejectMessagesFromDLMembers, RejectMessagesFromSendersOrMembers, ReportToManagerEnabled, ReportToOriginatorEnabled, RequireSenderAuthenticationEnabled, SendModerationNotifications, SendOofMessageToOriginatorEnabled, SimpleDisplayName, Verbose, WarningAction, WarningVariable, WhatIf, WindowsEmailAddress}

Write-AdminAuditLog {Comment, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Return to list


23

EAS Policy Editor

Cmdlet Parameters

Disable-RemoteMailbox {Archive, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, IgnoreDefaultScope, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Enable-RemoteMailbox

{Alias, Archive, ArchiveName, Confirm, Debug, DisplayName,DomainController, Equipment, ErrorAction, ErrorVariable, Identity, IgnoreExistingArchive, MacAttachmentFormat, MessageBodyFormat, MessageFormat, OutBuffer, OutVariable, PrimarySmtpAddress, RemoteRoutingAddress, Room, UsePreferMessageFormat, Verbose, WarningAction, WarningVariable, WhatIf}

Get-ActiveSyncDevice {Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, Mailbox, OrganizationalUnit, OutBuffer, OutVariable, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}

Get-ActiveSyncDeviceAccessRule {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-ActiveSyncDeviceClass {Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, OutBuffer, OutVariable, SortBy, Verbose, WarningAction, WarningVariable}

Get-ActiveSyncDeviceStatistics {Debug, DomainController, ErrorAction, ErrorVariable, GetMailboxLog, Identity, Mailbox, NotificationEmailAddresses, OutBuffer, OutVariable, ShowRecoveryPassword, Verbose, WarningAction, WarningVariable}

Get-ActiveSyncMailboxPolicy {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-ActiveSyncOrganizationSettings {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


Get-CASMailbox

{Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ProtocolSettings, ReadFromDomainController, ResultSize, SortBy, Verbose, WarningAction, WarningVariable ActiveSyncDebugLogging, Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ProtocolSettings, ReadFromDomainController, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}

Get-ClientAccessArray {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Site, Verbose, WarningAction, WarningVariable}


Get-OutlookProvider {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-RpcClientAccess {Debug, DomainController, ErrorAction, ErrorVariable, OutBuffer, OutVariable, Server, Verbose, WarningAction, WarningVariable}

Get-ThrottlingPolicyAssociation {Anr, Debug, DomainController, ErrorAction, ErrorVariable,Identity, OutBuffer, OutVariable, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}

New-ActiveSyncDeviceAccessRule {AccessLevel, Characteristic, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, OutBuffer, OutVariable, QueryString, Verbose, WarningAction, WarningVariable, WhatIf}


24

EAS Policy Editor

Cmdlet Parameters

New-ActiveSyncMailboxPolicy

{AllowBluetooth, AllowBrowser, AllowCamera, AllowConsumerEmail, AllowDesktopSync, AllowExternalDeviceManagement, AllowHTMLEmail, AllowInternetSharing, AllowIrDA, AllowMobileOTAUpdate, AllowNonProvisionableDevices, AllowPOPIMAPEmail, AllowRemoteDesktop, AllowSimpleDevicePassword, AllowSMIMEEncryptionAlgorithmNegotiation, AllowSMIMESoftCerts, AllowStorageCard, AllowTextMessaging, AllowUnsignedApplications, AllowUnsignedInstallationPackages, AllowWiFi, AlphanumericDevicePasswordRequired, ApprovedApplicationList, AttachmentsEnabled, Confirm, Debug, DeviceEncryptionEnabled, DevicePasswordEnabled, DevicePasswordExpiration, DevicePasswordHistory, DevicePolicyRefreshInterval, DomainController, ErrorAction,ErrorVariable, IrmEnabled, IsDefaultPolicy, MaxAttachmentSize, MaxCalendarAgeFilter, MaxDevicePasswordFailedAttempts,MaxEmailAgeFilter, MaxEmailBodyTruncationSize, MaxEmailHTMLBodyTruncationSize, MaxInactivityTimeDeviceLock, MinDevicePasswordComplexCharacters, MinDevicePasswordLength, Name, OutBuffer, OutVariable, PasswordRecoveryEnabled, RequireDeviceEncryption, RequireEncryptedSMIMEMessages, RequireEncryptionSMIMEAlgorithm, RequireManualSyncWhenRoaming, RequireSignedSMIMEAlgorithm, RequireSignedSMIMEMessages, RequireStorageCardEncryption, UnapprovedInROMApplicationList, UNCAccessEnabled, Verbose, WarningAction, WarningVariable, WhatIf, WSSAccessEnabled}

Remove-ActiveSyncDeviceAccessRule {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-ActiveSyncDeviceClass {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-ActiveSyncMailboxPolicy {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Force, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Set-ActiveSyncDeviceAccessRule {AccessLevel, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Set-ActiveSyncMailboxPolicy

{AllowBluetooth, AllowBrowser, AllowCamera, AllowConsumerEmail, AllowDesktopSync, AllowExternalDeviceManagement, AllowHTMLEmail, AllowInternetSharing, AllowIrDA, AllowMobileOTAUpdate, AllowNonProvisionableDevices, AllowPOPIMAPEmail, AllowRemoteDesktop, AllowSimpleDevicePassword, AllowSMIMEEncryptionAlgorithmNegotiation, AllowSMIMESoftCerts, AllowStorageCard, AllowTextMessaging, AllowUnsignedApplications, AllowUnsignedInstallationPackages, AllowWiFi, AlphanumericDevicePasswordRequired, ApprovedApplicationList, AttachmentsEnabled, Confirm, Debug, DeviceEncryptionEnabled, DevicePasswordEnabled, DevicePasswordExpiration, DevicePasswordHistory, DevicePolicyRefreshInterval, DomainController, ErrorAction, ErrorVariable, Identity, IrmEnabled, IsDefaultPolicy, MaxAttachmentSize, MaxCalendarAgeFilter, MaxDevicePasswordFailedAttempts, MaxEmailAgeFilter, MaxEmailBodyTruncationSize, MaxEmailHTMLBodyTruncationSize, MaxInactivityTimeDeviceLock, MinDevicePasswordComplexCharacters, MinDevicePasswordLength, Name, OutBuffer, OutVariable, PasswordRecoveryEnabled, RequireDeviceEncryption, RequireEncryptedSMIMEMessages, RequireEncryptionSMIMEAlgorithm, RequireManualSyncWhenRoaming, RequireSignedSMIMEAlgorithm, RequireSignedSMIMEMessages, RequireStorageCardEncryption, UnapprovedInROMApplicationList, UNCAccessEnabled, Verbose, WarningAction, WarningVariable, WhatIf, WSSAccessEnabled}

Set-ActiveSyncOrganizationSettings {AdminMailRecipients, Confirm, Debug, DefaultAccessLevel, DomainController, ErrorAction, ErrorVariable, Identity, OtaNotificationMailInsert, OutBuffer, OutVariable, UserMailInsert, Verbose, WarningAction, WarningVariable, WhatIf}




25

EAS Policy Editor

Cmdlet Parameters

Set-CASMailbox

{ActiveSyncAllowedDeviceIDs, ActiveSyncBlockedDeviceIDs, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf ActiveSyncDebugLogging, ActiveSyncEnabled, ActiveSyncMailboxPolicy, Confirm, Debug, DomainController, ECPEnabled, EmailAddresses, ErrorAction, ErrorVariable, EwsAllowEntourage, EwsAllowList, EwsAllowMacOutlook, EwsAllowOutlook, EwsApplicationAccessPolicy, EwsBlockList, EwsEnabled, HasActiveSyncDevicePartnership, Identity, ImapSuppressReadReceipt, OutBuffer, OutVariable, PopSuppressReadReceipt, ShowGalAsDefaultView, Verbose, WarningAction, WarningVariable, WhatIf}

Set-ThrottlingPolicyAssociation {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ThrottlingPolicy, Verbose, WarningAction, WarningVariable, WhatIf}


Set-OwaMailboxPolicy

{ActionForUnknownFileAndMIMETypes, ActiveSyncIntegrationEnabled, AllAddressListsEnabled, AllowedFileTypes, AllowedMimeTypes, BlockedFileTypes, BlockedMimeTypes, CalendarEnabled, ChangePasswordEnabled, Confirm, ContactsEnabled, Debug, DefaultClientLanguage, DefaultTheme, DelegateAccessEnabled, DirectFileAccessOnPrivateComputersEnabled, DirectFileAccessOnPublicComputersEnabled, DomainController, ErrorAction, ErrorVariable, ExplicitLogonEnabled, ForceSaveAttachmentFilteringEnabled, ForceSaveFileTypes, ForceSaveMimeTypes, ForceWebReadyDocumentViewingFirstOnPrivateComputers, ForceWebReadyDocumentViewingFirstOnPublicComputers, GlobalAddressListEnabled, Identity, InstantMessagingEnabled, InstantMessagingType, IRMEnabled, JournalEnabled, JunkEmailEnabled, LogonAndErrorLanguage, Name, NotesEnabled, OrganizationEnabled, OutboundCharset, OutBuffer, OutVariable, OWALightEnabled, OWAMiniEnabled, PhoneticSupportEnabled, PremiumClientEnabled, PublicFoldersEnabled, RecoverDeletedItemsEnabled, RemindersAndNotificationsEnabled, RulesEnabled, SearchFoldersEnabled, SignaturesEnabled, SilverlightEnabled, SMimeEnabled, SpellCheckerEnabled, TasksEnabled, TextMessagingEnabled, ThemeSelectionEnabled, UMIntegrationEnabled, UNCAccessOnPrivateComputersEnabled, UNCAccessOnPublicComputersEnabled, UseGB18030, UseISO885915, Verbose, WarningAction, WarningVariable, WebReadyDocumentViewingForAllSupportedTypes, WebReadyDocumentViewingOnPrivateComputersEnabled, WebReadyDocumentViewingOnPublicComputersEnabled, WebReadyDocumentViewingSupportedFileTypes, WebReadyDocumentViewingSupportedMimeTypes, WebReadyFileTypes, WebReadyMimeTypes, WhatIf, WSSAccessOnPrivateComputersEnabled, WSSAccessOnPublicComputersEnabled}

Remove-ActiveSyncDevice {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Get-ThrottlingPolicy {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Remove-OwaMailboxPolicy {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Force, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Get-OwaMailboxPolicy {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

New-OwaMailboxPolicy {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Name, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Return to list


26

EAS User Settings

Cmdlet Parameters

Disable-RemoteMailbox {Archive, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity,

IgnoreDefaultScope, OutBuffer, OutVariable, Verbose, WarningAction,

WarningVariable, WhatIf}

Enable-RemoteMailbox {Alias, Archive, ArchiveName, Confirm, Debug, DisplayName,DomainController,

Equipment, ErrorAction, ErrorVariable, Identity, IgnoreExistingArchive,

MacAttachmentFormat, MessageBodyFormat, MessageFormat, OutBuffer, OutVariable,

PrimarySmtpAddress, RemoteRoutingAddress, Room, UsePreferMessageFormat, Verbose,

WarningAction, WarningVariable, WhatIf}

Get-ActiveSyncDevice {Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, Mailbox,

OrganizationalUnit, OutBuffer, OutVariable, ResultSize, SortBy, Verbose,

WarningAction, WarningVariable}

Get-ActiveSyncDeviceAccessRule {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,

OutVariable, Verbose, WarningAction, WarningVariable}

Get-ActiveSyncDeviceClass {Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, OutBuffer,

OutVariable, SortBy, Verbose, WarningAction, WarningVariable}

Get-ActiveSyncDeviceStatistics {Debug, DomainController, ErrorAction, ErrorVariable, GetMailboxLog, Identity,

Mailbox, NotificationEmailAddresses, OutBuffer, OutVariable, ShowRecoveryPassword,

Verbose, WarningAction, WarningVariable}

Get-ActiveSyncMailboxPolicy {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,


Get-ActiveSyncOrganizationSettings {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,


Get-ADServerSettings {Debug, ErrorAction, ErrorVariable, OutBuffer, OutVariable, Verbose, WarningAction,

WarningVariable}

Get-CASMailbox {ActiveSyncDebugLogging, Anr, Credential, Debug, DomainController, ErrorAction,

ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer,

OutVariable, ProtocolSettings, ReadFromDomainController, ResultSize, SortBy,

Verbose, WarningAction, WarningVariable Anr, Credential, Debug, DomainController,

ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope,

OrganizationalUnit, OutBuffer, OutVariable, ProtocolSettings,

ReadFromDomainController, ResultSize, SortBy, Verbose, WarningAction,

WarningVariable}

Get-ClientAccessArray {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,

OutVariable, Site, Verbose, WarningAction,WarningVariable}

Get-DomainController {Credential, Debug, DomainName, ErrorAction, ErrorVariable, Forest, GlobalCatalog,

OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-OutlookProvider {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,


Get-RpcClientAccess {Debug, DomainController, ErrorAction, ErrorVariable, OutBuffer, OutVariable,

Server, Verbose, WarningAction, WarningVariable}

Set-ADServerSettings {ConfigurationDomainController, Confirm, Debug, ErrorAction, ErrorVariable,

OutBuffer, OutVariable, PreferredGlobalCatalog, PreferredServer, RecipientViewRoot,

RunspaceServerSettings, SetPreferredDomainControllers, Verbose, ViewEntireForest,



27

EAS User Settings

Cmdlet Parameters

Set-CASMailbox {ActiveSyncDebugLogging, ActiveSyncEnabled, ActiveSyncMailboxPolicy, Confirm,

Debug, DomainController, ECPEnabled, EmailAddresses, ErrorAction, ErrorVariable,

EwsAllowEntourage, EwsAllowList, EwsAllowMacOutlook, EwsAllowOutlook,

EwsApplicationAccessPolicy, EwsBlockList, EwsEnabled,

HasActiveSyncDevicePartnership, Identity, ImapSuppressReadReceipt, OutBuffer,

OutVariable, PopSuppressReadReceipt, ShowGalAsDefaultView, Verbose, WarningAction,

WarningVariable, WhatIf ActiveSyncAllowedDeviceIDs, ActiveSyncBlockedDeviceIDs,

Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,

OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Write-AdminAuditLog {Comment, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, OutBuffer,




Return to list

EAS Wipe Device

Cmdlet Parameters

Clear-ActiveSyncDevice {Cancel, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, NotificationEmailAddresses, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}




Get-CASMailbox

{ActiveSyncDebugLogging, Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ProtocolSettings, ReadFromDomainController, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}


Get-Mailbox

{Anr, Archive, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope,OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, Server, SortBy, Verbose, WarningAction, WarningVariable}





28

EAS Wipe Device

Cmdlet Parameters


Return to list


Note: The cmdlet associated with this role works differently than normal

cmdlets. Members of the EWS Application Impersonation role group cannot

run the Impersonate-ExchangeUser cmdlet. The cmdlet allows a group member

to develop code to impersonate users using EWS. See support article

Impersonation rights are not working in Office 365 Dedicated/ITAR for more

information.

Cmdlet Parameters

Impersonate-ExchangeUser {}

Return to list


Cmdlet Parameters

Disable-InboxRule {AlwaysDeleteOutlookRulesBlob, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Force, Identity, Mailbox, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Enable-InboxRule {AlwaysDeleteOutlookRulesBlob, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Force, Identity, Mailbox, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Get-AcceptedDomain

{Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}





Get-AvailabilityAddressSpace {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-CalendarNotification {Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Verbose, WarningAction, WarningVariable}



29


Cmdlet Parameters

Get-CalendarProcessing {ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, WarningAction, WarningVariable}

Get-Contact

{Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}

Get-CASMailbox








Get-Group


Get-InboxRule {Debug, DescriptionTimeFormat, DescriptionTimeZone, DomainController, ErrorAction, ErrorVariable, Identity, Mailbox, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-LogonStatistics {Database, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Server, Verbose, WarningAction, WarningVariable}

Get-Mailbox

{Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable Anr, Arbitration, Archive, Credential, Database, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, RemoteArchive, ResultSize, Server, SortBy, Verbose, WarningAction, WarningVariable Anr, Archive, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, Server, SortBy, Verbose, WarningAction, WarningVariable}

Get-MailboxAutoReplyConfiguration {Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Verbose, WarningAction, WarningVariable}

Get-MailboxCalendarConfiguration {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-MailboxCalendarFolder {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


30


Cmdlet Parameters

Get-MailContact


Get-MailboxDatabase {Debug, DomainController, DumpsterStatistics, ErrorAction, ErrorVariable, Identity, IncludePreExchange2010, OutBuffer, OutVariable, Server, Status, Verbose, WarningAction, WarningVariable}

Get-MailboxFolderPermission {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, User, Verbose, WarningAction, WarningVariable}

Get-MailboxFolderStatistics {Archive, Debug, DomainController, ErrorAction, ErrorVariable, FolderScope, Identity, IncludeAnalysis, IncludeOldestAndNewestItems, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-MailboxJunkEmailConfiguration {Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Verbose, WarningAction, WarningVariable}

Get-MailboxMessageConfiguration {Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Verbose, WarningAction, WarningVariable}

Get-MailboxPermission {Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Owner, ReadFromDomainController, ResultSize, User, Verbose, WarningAction, WarningVariable}

Get-MailboxRegionalConfiguration {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, VerifyDefaultFolderNameLanguage, WarningAction, WarningVariable}

Get-MailboxSpellingConfiguration

{Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, WarningAction, WarningVariable}

Get-MailboxStatistics {Archive, Database, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Server, Verbose, WarningAction, WarningVariable}

Get-MailUser

{Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}

Get-ManagementRole {Cmdlet, CmdletParameters, Debug, DomainController, ErrorAction, ErrorVariable, GetChildren, Identity, OutBuffer, OutVariable, Recurse, RoleType, Script, ScriptParameters, Verbose, WarningAction, WarningVariable}

Get-ManagementRoleAssignment

{AssignmentMethod, ConfigWriteScope, CustomConfigWriteScope, CustomRecipientWriteScope, Debug, Delegating, DomainController, Enabled, ErrorAction, ErrorVariable, Exclusive, ExclusiveConfigWriteScope, ExclusiveRecipientWriteScope, GetEffectiveUsers, Identity, OutBuffer, OutVariable, RecipientOrganizationalUnitScope, RecipientWriteScope, Role, RoleAssignee, RoleAssigneeType, Verbose, WarningAction, WarningVariable, WritableRecipient}

Get-ManagementRoleEntry {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Parameters, PSSnapinName, Type, Verbose, WarningAction, WarningVariable}

Get-MessageCategory {Debug, DomainController, ErrorAction, ErrorVariable, Identity, Mailbox, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


31


Cmdlet Parameters

Get-MessageClassification {Debug, DomainController, ErrorAction, ErrorVariable, Identity, IncludeLocales, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-OfflineAddressBook {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Server, Verbose, WarningAction, WarningVariable}


Get-OrganizationRelationship {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


Get-Recipient

{Anr, BookmarkDisplayName, ErrorAction, ErrorVariable, Filter, Identity, IncludeBookmarkObject, OrganizationalUnit, OutBuffer, OutVariable, PropertySet, RecipientType, RecipientTypeDetails, ResultSize, SortBy, WarningAction, WarningVariable Anr, BookmarkDisplayName, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, IncludeBookmarkObject, OrganizationalUnit, OutBuffer, OutVariable, PropertySet, ReadFromDomainController, RecipientPreviewFilter, RecipientType, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable Anr, BookmarkDisplayName, ErrorAction, ErrorVariable, Filter, Identity, IncludeBookmarkObject, OrganizationalUnit, OutBuffer, OutVariable, PropertySet, RecipientPreviewFilter, RecipientType, RecipientTypeDetails, ResultSize, SortBy, WarningAction, WarningVariable}

Get-RemoteMailbox

{Anr, Archive, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OnPremisesOrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}

Get-ResourceConfig {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-RoleGroup {Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, ShowPartnerLinked, SortBy, Verbose, WarningAction, WarningVariable}

Get-RoleGroupMember { Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Verbose, WarningAction, WarningVariable}

Get-SecurityPrincipal {Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IncludeDomainLocalFrom, OrganizationalUnit, OutBuffer, OutVariable, ResultSize, RoleGroupAssignable, Types, Verbose, WarningAction, WarningVariable}

Get-TextMessagingAccount {Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Verbose, WarningAction, WarningVariable}

Get-Trust {Debug, DomainName, ErrorAction, ErrorVariable, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-User

{Anr, Arbitration, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}


32


Cmdlet Parameters

Get-UserPrincipalNamesSuffix {Debug, ErrorAction, ErrorVariable, OrganizationalUnit, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

New-InboxRule

{AlwaysDeleteOutlookRulesBlob, ApplyCategory, BodyContainsWords, Confirm, CopyToFolder, Debug, DeleteMessage, DomainController, ErrorAction, ErrorVariable, ExceptIfBodyContainsWords, ExceptIfFlaggedForAction, ExceptIfFrom, ExceptIfFromAddressContainsWords, ExceptIfHasAttachment, ExceptIfHasClassification, ExceptIfHeaderContainsWords, ExceptIfMessageTypeMatches, ExceptIfMyNameInCcBox, ExceptIfMyNameInToBox, ExceptIfMyNameInToOrCcBox, ExceptIfMyNameNotInToBox, ExceptIfReceivedAfterDate, ExceptIfReceivedBeforeDate, ExceptIfRecipientAddressContainsWords, ExceptIfSentOnlyToMe, ExceptIfSentTo, ExceptIfSubjectContainsWords, ExceptIfSubjectOrBodyContainsWords, ExceptIfWithImportance, ExceptIfWithinSizeRangeMaximum, ExceptIfWithinSizeRangeMinimum, ExceptIfWithSensitivity, FlaggedForAction, Force, ForwardAsAttachmentTo, ForwardTo, From, FromAddressContainsWords, FromMessageId, HasAttachment, HasClassification, HeaderContainsWords, Mailbox, MarkAsRead, MarkImportance, MessageTypeMatches, MoveToFolder, MyNameInCcBox, MyNameInToBox, MyNameInToOrCcBox, MyNameNotInToBox, Name, OutBuffer, OutVariable, Priority, ReceivedAfterDate, ReceivedBeforeDate, RecipientAddressContainsWords, RedirectTo, SentOnlyToMe, SentTo, StopProcessingRules, SubjectContainsWords, SubjectOrBodyContainsWords, ValidateOnly, Verbose, WarningAction, WarningVariable, WhatIf, WithImportance, WithinSizeRangeMaximum, WithinSizeRangeMinimum, WithSensitivity}

Remove-InboxRule {AlwaysDeleteOutlookRulesBlob, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Force, Identity, Mailbox, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}



Set-DistributionGroup

{BypassModerationFromSendersOrMembers, BypassNestedModerationEnabled, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, ForceUpgrade, GrantSendOnBehalfTo, HiddenFromAddressListsEnabled, ManagedBy, ModeratedBy, ModerationEnabled, OutBuffer, OutVariable, RoomList, SendModerationNotifications, Verbose, WarningAction, WarningVariable, WhatIf}

Set-InboxRule

{AlwaysDeleteOutlookRulesBlob, ApplyCategory, BodyContainsWords, Confirm, CopyToFolder, Debug, DeleteMessage, DomainController, ErrorAction, ErrorVariable, ExceptIfBodyContainsWords, ExceptIfFlaggedForAction, ExceptIfFrom, ExceptIfFromAddressContainsWords, ExceptIfHasAttachment, ExceptIfHasClassification, ExceptIfHeaderContainsWords, ExceptIfMessageTypeMatches, ExceptIfMyNameInCcBox, ExceptIfMyNameInToBox, ExceptIfMyNameInToOrCcBox, ExceptIfMyNameNotInToBox, ExceptIfReceivedAfterDate, ExceptIfReceivedBeforeDate, ExceptIfRecipientAddressContainsWords, ExceptIfSentOnlyToMe, ExceptIfSentTo, ExceptIfSubjectContainsWords, ExceptIfSubjectOrBodyContainsWords, ExceptIfWithImportance, ExceptIfWithinSizeRangeMaximum, ExceptIfWithinSizeRangeMinimum, ExceptIfWithSensitivity, FlaggedForAction, Force, ForwardAsAttachmentTo, ForwardTo, From, FromAddressContainsWords, HasAttachment, HasClassification, HeaderContainsWords, Identity, Mailbox, MarkAsRead, MarkImportance, MessageTypeMatches, MoveToFolder, MyNameInCcBox, MyNameInToBox, MyNameInToOrCcBox, MyNameNotInToBox, Name, OutBuffer, OutVariable, Priority, ReceivedAfterDate, ReceivedBeforeDate, RecipientAddressContainsWords, RedirectTo, SentOnlyToMe, SentTo, StopProcessingRules, SubjectContainsWords, SubjectOrBodyContainsWords, Verbose, WarningAction, WarningVariable, WhatIf, WithImportance, WithinSizeRangeMaximum, WithinSizeRangeMinimum, WithSensitivity}


33


Cmdlet Parameters

Set-Mailbox

{ErrorAction, ErrorVariable, ExternalOofOptions, Identity, Languages, OutBuffer, OutVariable, WarningAction, WarningVariable Confirm, Debug, DeliverToMailboxAndForward, DomainController, ErrorAction, ErrorVariable, ForwardingAddress, ForwardingSmtpAddress, GrantSendOnBehalfTo, HiddenFromAddressListsEnabled, Identity, OutBuffer, OutVariable, ResourceCapacity, ResourceCustom, RulesQuota, Verbose, WarningAction, WarningVariable, WhatIf}

Set-MailboxAutoReplyConfiguration

{AutoReplyState, Confirm, Debug, DomainController, EndTime, ErrorAction, ErrorVariable, ExternalAudience, ExternalMessage, Identity, IgnoreDefaultScope, InternalMessage, OutBuffer, OutVariable, StartTime, Verbose, WarningAction, WarningVariable, WhatIf}

Set-MailboxCalendarConfiguration

{Confirm, Debug, DefaultReminderTime, DomainController, ErrorAction, ErrorVariable, FirstWeekOfYear, Identity, OutBuffer, OutVariable, RemindersEnabled, ReminderSoundEnabled, ShowWeekNumbers, TimeIncrement, Verbose, WarningAction, WarningVariable, WeekStartDay, WhatIf, WorkDays, WorkingHoursEndTime, WorkingHoursStartTime, WorkingHoursTimeZone}

Set-MailboxCalendarFolder

{Confirm, Debug, DetailLevel, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, PublishDateRangeFrom, PublishDateRangeTo, PublishEnabled, ResetUrl, SearchableUrlEnabled, Verbose, WarningAction, WarningVariable, WhatIf}

Set-MailboxJunkEmailConfiguration

{BlockedSendersAndDomains, Confirm, ContactsTrusted, Debug, DomainController, Enabled, ErrorAction, ErrorVariable, Identity, IgnoreDefaultScope, OutBuffer, OutVariable, TrustedListsOnly, TrustedSendersAndDomains, Verbose, WarningAction, WarningVariable, WhatIf}

Set-MailboxMessageConfiguration

{AfterMoveOrDeleteBehavior, AlwaysShowBcc, AlwaysShowFrom, AutoAddSignature, Confirm, ConversationSortOrder, Debug, DefaultFontColor, DefaultFontFlags, DefaultFontName, DefaultFontSize, DefaultFormat, DomainController, EmptyDeletedItemsOnLogoff, ErrorAction, ErrorVariable, HideDeletedItems, Identity, IgnoreDefaultScope, NewItemNotification, OutBuffer, OutVariable, PreviewMarkAsReadBehavior, PreviewMarkAsReadDelaytime, ReadReceiptResponse, ShowConversationAsTree, SignatureHtml, SignatureText, Verbose, WarningAction, WarningVariable, WhatIf}

Set-MailboxRegionalConfiguration

{Confirm, DateFormat, Debug, DomainController, ErrorAction, ErrorVariable, Identity, Language, LocalizeDefaultFolderName, OutBuffer, OutVariable, TimeFormat, TimeZone, Verbose, WarningAction, WarningVariable, WhatIf Confirm, DateFormat, ErrorAction, ErrorVariable, Identity, Language, LocalizeDefaultFolderName, OutBuffer, OutVariable, TimeFormat, TimeZone, WarningAction, WarningVariable, WhatIf}

Set-MailboxSpellingConfiguration

{CheckBeforeSend, Confirm, Debug, DictionaryLanguage, DomainController, ErrorAction, ErrorVariable, Identity, IgnoreMixedDigits, IgnoreUppercase, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf CheckBeforeSend, Confirm, DictionaryLanguage, ErrorAction, ErrorVariable, Identity, IgnoreMixedDigits, IgnoreUppercase, OutBuffer, OutVariable, WarningAction, WarningVariable, WhatIf}


Return to list


34

Mail Tips Author

Cmdlet Parameters







Get-Mailbox


Get-OrganizationConfig { Debug, DomainController, ErrorAction, ErrorVariable, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-Recipient

{Anr, BookmarkDisplayName, ErrorAction, ErrorVariable, Filter, Identity, IncludeBookmarkObject, OrganizationalUnit, OutBuffer, OutVariable, PropertySet, RecipientPreviewFilter, RecipientType, RecipientTypeDetails, ResultSize, SortBy, WarningAction, WarningVariable Anr, BookmarkDisplayName, ErrorAction, ErrorVariable, Filter, Identity, IncludeBookmarkObject, OrganizationalUnit, OutBuffer, OutVariable, PropertySet, RecipientType, RecipientTypeDetails, ResultSize, SortBy, WarningAction, WarningVariable}



Set-DistributionGroup {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, ForceUpgrade, Identity, IgnoreDefaultScope, IgnoreNamingPolicy, MailTip, MailTipTranslations, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Set-DynamicDistributionGroup {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, MailTip, MailTipTranslations, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Set-Mailbox {Confirm, Debug, ErrorAction, ErrorVariable, Force, Identity, ImmutableId, MailTip, MailTipTranslations, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Set-OrganizationConfig

{Confirm, Debug, DomainController, ErrorAction, ErrorVariable, MailTipsAllTipsEnabled, MailTipsExternalRecipientsTipsEnabled, MailTipsGroupMetricsEnabled, MailTipsLargeAudienceThreshold, MailTipsMailboxSourcedTipsEnabled, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}


Return to list


35

Mailbox Permissions

Cmdlet Parameters

Add-ADPermission

{AccessRights, ChildObjectTypes, Confirm, Debug, Deny, DomainController, ErrorAction, ErrorVariable, ExtendedRights, Identity, InheritanceType, InheritedObjectType, Instance, OutBuffer, OutVariable, Owner, Properties, User, Verbose, WarningAction, WarningVariable, WhatIf}

Add-MailboxFolderPermission {AccessRights, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, User, Verbose, WarningAction, WarningVariable, WhatIf}

Add-MailboxPermission {AccessRights, AutoMapping, Confirm, Debug, Deny, DomainController, ErrorAction, ErrorVariable, Identity, IgnoreDefaultScope, InheritanceType, Instance, OutBuffer, OutVariable, Owner, User, Verbose, WarningAction, WarningVariable, WhatIf}

Get-AcceptedDomain {DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


Get-ADPermission {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Owner, User, Verbose, WarningAction, WarningVariable}


Get-CASMailbox


Get-Contact








Get-Group



36

Mailbox Permissions

Cmdlet Parameters

Get-Mailbox

{Anr, Arbitration, Archive, Credential, Database, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, RemoteArchive, ResultSize, Server, SortBy, Verbose, WarningAction, WarningVariable Anr, Archive, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, Server, SortBy, Verbose, WarningAction, WarningVariable Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}


Get-MailboxDatabase {Debug, DomainController, DumpsterStatistics, ErrorAction, ErrorVariable, Identity, IncludePreExchange2010, OutBuffer, OutVariable, Server, Status, Verbose, WarningAction, WarningVariable}

Get-MailboxFolderPermission {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, User, Verbose, WarningAction,WarningVariable}


Get-MailContact


Get-MailUser


Get-ManagedFolderMailboxPolicy {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


Get-Recipient

{Anr, BookmarkDisplayName, ErrorAction, ErrorVariable, Filter, Identity, IncludeBookmarkObject, OrganizationalUnit, OutBuffer, OutVariable, PropertySet, RecipientPreviewFilter, RecipientType, RecipientTypeDetails, ResultSize, SortBy, WarningAction, WarningVariable Anr, BookmarkDisplayName, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, IncludeBookmarkObject, OrganizationalUnit, OutBuffer, OutVariable, PropertySet, ReadFromDomainController, RecipientPreviewFilter, RecipientType, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable Anr, BookmarkDisplayName, ErrorAction, ErrorVariable, Filter, Identity, IncludeBookmarkObject, OrganizationalUnit, OutBuffer, OutVariable, PropertySet, RecipientType, RecipientTypeDetails, ResultSize, SortBy, WarningAction, WarningVariable}

Get-RoleAssignmentPolicy {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}



37

Mailbox Permissions

Cmdlet Parameters

Get-Trust {Debug, DomainName, ErrorAction, ErrorVariable, OutBuffer,OutVariable, Verbose, WarningAction, WarningVariable}

Get-User

{Anr, Arbitration, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}


Remove-ADPermission

{AccessRights, ChildObjectTypes, Confirm, Debug, Deny, DomainController, ErrorAction, ErrorVariable, ExtendedRights, Identity, InheritanceType, InheritedObjectType, Instance, OutBuffer, OutVariable, Properties, User, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-MailboxFolderPermission {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, User, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-MailboxPermission {AccessRights, Confirm, Debug, Deny, DomainController, ErrorAction, ErrorVariable, Identity, IgnoreDefaultScope, InheritanceType, Instance, OutBuffer, OutVariable, User, Verbose, WarningAction, WarningVariable, WhatIf}



Set-DistributionGroup {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, GrantSendOnBehalfTo, Identity, IgnoreDefaultScope, IgnoreNamingPolicy, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Set-DynamicDistributionGroup

{Confirm, Debug, DomainController, ErrorAction, ErrorVariable, ExtensionCustomAttribute1, ExtensionCustomAttribute2, ExtensionCustomAttribute3, ExtensionCustomAttribute4, ExtensionCustomAttribute5, GrantSendOnBehalfTo, Identity, IgnoreDefaultScope, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Set-Mailbox {ErrorAction, ErrorVariable, ExternalOofOptions, GrantSendOnBehalfTo, Identity, Languages, OutBuffer, OutVariable, WarningAction, WarningVariable}

Set-MailboxAutoReplyConfiguration

{AutoReplyState, Confirm, Debug, DomainController, EndTime, ErrorAction, ErrorVariable, ExternalAudience, ExternalMessage, Identity, IgnoreDefaultScope, InternalMessage, OutBuffer, OutVariable, StartTime, Verbose, WarningAction, WarningVariable, WhatIf}

Set-MailboxFolderPermission {AccessRights, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, User, Verbose, WarningAction, WarningVariable, WhatIf}

Set-MailUser

{Confirm, Debug, DomainController, ErrorAction, ErrorVariable, GrantSendOnBehalfTo, Identity, MacAttachmentFormat, MailTip, MailTipTranslations, MessageBodyFormat, MessageFormat, ModeratedBy, ModerationEnabled, OutBuffer, OutVariable, SendModerationNotifications, UseMapiRichTextFormat, UsePreferMessageFormat, Verbose, WarningAction, WarningVariable, WhatIf}


Return to list


38

Mailbox Search

Cmdlet Parameters



Get-Mailbox


Get-MailboxSearch {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ResultSize, Verbose, WarningAction, WarningVariable}

Get-Recipient

{Anr, BookmarkDisplayName, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, IncludeBookmarkObject, OrganizationalUnit, OutBuffer, OutVariable, PropertySet, ReadFromDomainController,RecipientPreviewFilter, RecipientType, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}

New-MailboxSearch

{Confirm, Debug, DomainController, DoNotIncludeArchive, EndDate, ErrorAction, ErrorVariable, EstimateOnly, ExcludeDuplicateMessages, Force, IncludeUnsearchableItems, Language, LogLevel, MessageTypes, Name, OutBuffer, OutVariable, Recipients, SearchDumpster, SearchQuery, Senders, SourceMailboxes, StartDate, StatusMailRecipients, TargetMailbox, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-MailboxSearch {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Search-Mailbox

{Confirm, Debug, DomainController, DoNotIncludeArchive, ErrorAction, ErrorVariable, EstimateResultOnly, Force, Identity, IncludeUnsearchableItems, LogLevel, LogOnly, OutBuffer,OutVariable, SearchDumpster, SearchDumpsterOnly, SearchQuery, TargetFolder, TargetMailbox, Verbose, WarningAction, WarningVariable, WhatIf}



Set-MailboxSearch

{Confirm, Debug, DomainController, DoNotIncludeArchive, EndDate, ErrorAction, ErrorVariable, EstimateOnly, ExcludeDuplicateMessages, Force, Identity, IncludeUnsearchableItems, Language, LogLevel, MessageTypes, Name, OutBuffer, OutVariable, Recipients, SearchDumpster, SearchQuery, Senders, SourceMailboxes, StartDate, StatusMailRecipients, TargetMailbox, Verbose, WarningAction, WarningVariable, WhatIf}

Start-MailboxSearch {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Force, Identity, OutBuffer, OutVariable, Resume, Verbose, WarningAction, WarningVariable, WhatIf}

Stop-MailboxSearch {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}


Return to list


39

Message Tracking

Cmdlet Parameters


Get-ExchangeServer {Debug, Domain, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Status, Verbose, WarningAction, WarningVariable}

Get-Mailbox

{Anr, Arbitration, Archive, Credential, Database, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, RemoteArchive, ResultSize, Server, SortBy, Verbose, WarningAction, WarningVariable}

Get-MessageTrackingLog

{Debug, DomainController, End, ErrorAction, ErrorVariable,EventId, InternalMessageId, MessageId, MessageSubject, OutBuffer, OutVariable, Recipients, Reference, ResultSize, Sender, Server, Start, Verbose, WarningAction, WarningVariable}

Get-MessageTrackingReport

{BypassDelegateChecking, Debug, DetailLevel, DomainController, DoNotResolve, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, RecipientPathFilter, Recipients, ReportTemplate, ResultSize, Status, TraceLevel, Verbose, WarningAction, WarningVariable}

Get-Recipient


Search-MessageTrackingReport

{BypassDelegateChecking, Confirm, Debug, DomainController,DoNotResolve, ErrorAction, ErrorVariable, Identity, MessageEntryId, MessageId, OutBuffer, OutVariable, Recipients, ResultSize, Sender, Subject, TraceLevel, Verbose, WarningAction, WarningVariable, WhatIf}





Return to list

Protocol Control

Cmdlet Parameters




40

Protocol Control

Cmdlet Parameters

Get-ActiveSyncDeviceAccessRule {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-ActiveSyncDeviceClass {Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, OutBuffer, OutVariable, SortBy, Verbose, WarningAction, WarningVariable}



Get-ActiveSyncOrganizationSettings {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}




Get-CASMailbox

{ActiveSyncDebugLogging, Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ProtocolSettings, ReadFromDomainController, ResultSize, SortBy, Verbose, WarningAction, WarningVariable Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ProtocolSettings, ReadFromDomainController, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}

Get-ClientAccessArray {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Site, Verbose, WarningAction,WarningVariable}

Get-Contact



Get-Mailbox


Get-MailboxDatabase {Debug, DomainController, DumpsterStatistics, ErrorAction,ErrorVariable, Identity, IncludePreExchange2010, OutBuffer, OutVariable, Server, Status, Verbose, WarningAction, WarningVariable}

Get-MailContact


Get-MailUser



41

Protocol Control

Cmdlet Parameters

Get-OfflineAddressBook {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Server, Verbose, WarningAction, WarningVariable}


Get-OutlookProvider {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


Get-Recipient

{Anr, BookmarkDisplayName, ErrorAction, ErrorVariable, Filter, Identity, IncludeBookmarkObject, OrganizationalUnit, OutBuffer, OutVariable, PropertySet, RecipientPreviewFilter,RecipientType, RecipientTypeDetails, ResultSize, SortBy, WarningAction, WarningVariable}


Get-RpcClientAccess {Debug, DomainController, ErrorAction, ErrorVariable, OutBuffer, OutVariable, Server, Verbose, WarningAction, WarningVariable}


Get-Trust {Debug, DomainName, ErrorAction, ErrorVariable, OutBuffer,OutVariable, Verbose, WarningAction, WarningVariable}

Get-User





Set-CASMailbox

{ActiveSyncDebugLogging, ActiveSyncEnabled, ActiveSyncMailboxPolicy, Confirm, Debug, DomainController, ECPEnabled, ErrorAction, ErrorVariable, EwsAllowEntourage, EwsAllowList, EwsAllowMacOutlook, EwsAllowOutlook, EwsApplicationAccessPolicy, EwsBlockList, EwsEnabled, HasActiveSyncDevicePartnership, Identity, ImapEnabled, ImapEnableExactRFC822Size, ImapMessagesRetrievalMimeFormat, ImapSuppressReadReceipt, ImapUseProtocolDefaults, MAPIBlockOutlookNonCachedMode, MAPIBlockOutlookRpcHttp, MAPIBlockOutlookVersions, MAPIEnabled, OutBuffer, OutVariable, OWAEnabled, OwaMailboxPolicy, PopEnabled, PopEnableExactRFC822Size, PopMessagesRetrievalMimeFormat, PopSuppressReadReceipt, PopUseProtocolDefaults, ShowGalAsDefaultView, Verbose, WarningAction, WarningVariable, WhatIf ActiveSyncAllowedDeviceIDs, ActiveSyncBlockedDeviceIDs, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}


Return to list


42

RBA Settings

Cmdlet Parameters




Set-CalendarProcessing

{AddAdditionalResponse, AdditionalResponse, AddNewRequestsTentatively, AddOrganizerToSubject, AllBookInPolicy, AllowConflicts, AllowRecurringMeetings, AllRequestInPolicy, AllRequestOutOfPolicy, AutomateProcessing, BookingWindowInDays, BookInPolicy, Confirm, ConflictPercentageAllowed, Debug, DeleteAttachments, DeleteComments, DeleteNonCalendarItems, DeleteSubject, DomainController, EnableResponseDetails, EnforceSchedulingHorizon, ErrorAction, ErrorVariable, ForwardRequestsToDelegates, Identity, IgnoreDefaultScope, MaximumConflictInstances, MaximumDurationInMinutes, OrganizerInfo, OutBuffer, OutVariable, ProcessExternalMeetingMessages, RemoveForwardedMeetingNotifications, RemoveOldMeetingMessages, RemovePrivateProperty, RequestInPolicy, RequestOutOfPolicy, ResourceDelegates, ScheduleOnlyDuringWorkHours, TentativePendingApproval, WarningAction, WarningVariable, WhatIf}


Set-ResourceConfig {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, OutBuffer, OutVariable, ResourcePropertySchema, Verbose, WarningAction, WarningVariable, WhatIf}

Get-Mailbox


Get-AcceptedDomain {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


Get-Group




Set-DistributionGroup {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, ForceUpgrade, HiddenFromAddressListsEnabled, ManagedBy, OutBuffer, OutVariable, RoomList, Verbose, WarningAction, WarningVariable, WhatIf}




43

RBA Settings

Cmdlet Parameters

Get-User

{Anr, Arbitration, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}


Get-ClientAccessServer {IncludeAlternateServiceAccountCredentialPassword}


Set-DistributionGroup

{BypassModerationFromSendersOrMembers, BypassNestedModerationEnabled, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, ForceUpgrade, GrantSendOnBehalfTo, HiddenFromAddressListsEnabled, ManagedBy, ModeratedBy, ModerationEnabled, OutBuffer, OutVariable, RoomList, SendModerationNotifications, Verbose, WarningAction, WarningVariable, WhatIf}

Set-Mailbox {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, OutBuffer, OutVariable, ResourceCapacity, ResourceCustom, Verbose, WarningAction, WarningVariable, WhatIf}

Get-Recipient

{Anr, BookmarkDisplayName, ErrorAction, ErrorVariable, Filter, Identity, IncludeBookmarkObject, OrganizationalUnit, OutBuffer, OutVariable, PropertySet, RecipientType, RecipientTypeDetails, ResultSize, SortBy, WarningAction, WarningVariable}




Get-MailUser


Return to list


Cmdlet Parameters





44


Cmdlet Parameters

Get-ReceiveConnector {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Server, Verbose, WarningAction, WarningVariable}

Get-SendConnector {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-TransportServer {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


Return to list

Search & Destroy

Cmdlet Parameters

Get-Mailbox

{Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, Server, SortBy, Verbose, WarningAction, WarningVariable}

Get-MailboxRestoreRequest {BatchName, ErrorAction, ErrorVariable, HighPriority, Identity, Name, OutBuffer, OutVariable, ResultSize, SourceDatabase, Status, Suspend, TargetDatabase, TargetMailbox, WarningAction, WarningVariable}

Get-MailboxRestoreRequestStatistics {Debug, DomainController, ErrorAction, ErrorVariable, Identity, IncludeReport, MRSInstance, OutBuffer, OutVariable, RequestGuid, RequestQueue, Verbose, WarningAction, WarningVariable}

New-MailboxRestoreRequest

{AcceptLargeDataLoss, AssociatedMessagesCopyOption, BadItemLimit, BatchName, Confirm, ConflictResolutionOption, ErrorAction, ErrorVariable, ExcludeDumpster, ExcludeFolders, IncludeFolders, Name, OutBuffer, OutVariable, SourceDatabase, SourceRootFolder, SourceStoreMailbox, Suspend, SuspendComment, TargetIsArchive, TargetMailbox, TargetRootFolder, WarningAction, WarningVariable, WhatIf}

Remove-MailboxRestoreRequest {Confirm, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, RequestGuid, RequestQueue, WarningAction, WarningVariable, WhatIf}

Resume-MailboxRestoreRequest {Confirm, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, WarningAction, WarningVariable, WhatIf}

Search-Mailbox

{Confirm, Debug, DeleteContent, DomainController, DoNotIncludeArchive, ErrorAction, ErrorVariable, EstimateResultOnly, Force, Identity, IncludeUnsearchableItems, LogLevel, LogOnly, OutBuffer, OutVariable, SearchDumpster, SearchDumpsterOnly, SearchQuery, TargetFolder, TargetMailbox, Verbose, WarningAction, WarningVariable, WhatIf}



Set-MailboxRestoreRequest {AcceptLargeDataLoss, BadItemLimit, BatchName, Confirm, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, WarningAction, WarningVariable, WhatIf}

Suspend-MailboxRestoreRequest {Confirm, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, SuspendComment, WarningAction, WarningVariable, WhatIf}


45

Search & Destroy

Cmdlet Parameters


Return to list

Transport Rules

Cmdlet Parameters

Disable-TransportRule {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Enable-TransportRule {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}



Get-MessageClassification {Debug, DomainController, ErrorAction, ErrorVariable, Identity, IncludeLocales, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-OrganizationRelationship { Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-Recipient


Get-RemoteDomain {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-SystemMessage {Debug, DomainController, ErrorAction, ErrorVariable, Identity, Original, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-TransportConfig {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-TransportRule {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, State, Verbose, WarningAction, WarningVariable}

Get-TransportRuleAction {Debug, ErrorAction, ErrorVariable, Name, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-TransportRulePredicate {Debug, ErrorAction, ErrorVariable, Name, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

New-MessageClassification

{ClassificationID, Confirm, Debug, DisplayName, DisplayPrecedence, DomainController, ErrorAction, ErrorVariable, Locale, Name, OutBuffer, OutVariable, PermissionMenuVisible, RecipientDescription, RetainClassificationEnabled, SenderDescription, Verbose, WarningAction, WarningVariable, WhatIf}


46

Transport Rules

Cmdlet Parameters

New-RemoteDomain {Confirm, Debug, DomainController, DomainName, ErrorAction, ErrorVariable, Name, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

New-TransportRule

{AdComparisonAttribute, AdComparisonOperator, AddManagerAsRecipientType, AddToRecipients, AnyOfCcHeader, AnyOfCcHeaderMemberOf, AnyOfRecipientAddressContainsWords, AnyOfRecipientAddressMatchesPatterns, AnyOfToCcHeader, AnyOfToCcHeaderMemberOf, AnyOfToHeader, AnyOfToHeaderMemberOf, ApplyClassification, ApplyHtmlDisclaimerFallbackAction, ApplyHtmlDisclaimerLocation, ApplyHtmlDisclaimerText, ApplyRightsProtectionTemplate, AttachmentContainsWords, AttachmentIsUnsupported, AttachmentMatchesPatterns, AttachmentNameMatchesPatterns, AttachmentSizeOver, BetweenMemberOf1, BetweenMemberOf2, BlindCopyTo, Comments, Confirm, CopyTo, Debug, DeleteMessage, DomainController, Enabled, ErrorAction, ErrorVariable, ExceptIfAdComparisonAttribute, ExceptIfAdComparisonOperator, ExceptIfAnyOfCcHeader, ExceptIfAnyOfCcHeaderMemberOf, ExceptIfAnyOfRecipientAddressContainsWords, ExceptIfAnyOfRecipientAddressMatchesPatterns, ExceptIfAnyOfToCcHeader, ExceptIfAnyOfToCcHeaderMemberOf, ExceptIfAnyOfToHeader, ExceptIfAnyOfToHeaderMemberOf, ExceptIfAttachmentContainsWords, ExceptIfAttachmentIsUnsupported, ExceptIfAttachmentMatchesPatterns, ExceptIfAttachmentNameMatchesPatterns, ExceptIfAttachmentSizeOver, ExceptIfBetweenMemberOf1, ExceptIfBetweenMemberOf2, ExceptIfFrom, ExceptIfFromAddressContainsWords, ExceptIfFromAddressMatchesPatterns, ExceptIfFromMemberOf, ExceptIfFromScope, ExceptIfHasClassification, ExceptIfHasNoClassification, ExceptIfHeaderContainsMessageHeader, ExceptIfHeaderContainsWords, ExceptIfHeaderMatchesMessageHeader, ExceptIfHeaderMatchesPatterns, ExceptIfManagerAddresses, ExceptIfManagerForEvaluatedUser, ExceptIfMessageTypeMatches, ExceptIfRecipientADAttributeContainsWords, ExceptIfRecipientADAttributeMatchesPatterns, ExceptIfRecipientAddressContainsWords, ExceptIfRecipientAddressMatchesPatterns, ExceptIfSCLOver, ExceptIfSenderADAttributeContainsWords, ExceptIfSenderADAttributeMatchesPatterns, ExceptIfSenderManagementRelationship, ExceptIfSentTo, ExceptIfSentToMemberOf, ExceptIfSentToScope, ExceptIfSubjectContainsWords, ExceptIfSubjectMatchesPatterns, ExceptIfSubjectOrBodyContainsWords, ExceptIfSubjectOrBodyMatchesPatterns, ExceptIfWithImportance, From, FromAddressContainsWords, FromAddressMatchesPatterns, FromMemberOf, FromScope, HasClassification, HasNoClassification, HeaderContainsMessageHeader, HeaderContainsWords, HeaderMatchesMessageHeader, HeaderMatchesPatterns, ManagerAddresses, MessageTypeMatches, Name, OutBuffer, OutVariable, PrependSubject, Priority, RecipientADAttributeContainsWords, RecipientADAttributeMatchesPatterns, RecipientAddressContainsWords, RecipientAddressMatchesPatterns, RedirectMessageTo, RejectMessageEnhancedStatusCode, RejectMessageReasonText, RemoveHeader, SCLOver, SenderADAttributeContainsWords, SenderADAttributeMatchesPatterns, SenderManagementRelationship, SentTo, SentToMemberOf, SentToScope, SetHeaderName, SetHeaderValue, SetSCL, SmtpRejectMessageRejectStatusCode, SmtpRejectMessageRejectText, SubjectContainsWords, SubjectMatchesPatterns, SubjectOrBodyContainsWords, SubjectOrBodyMatchesPatterns, Verbose, WarningAction, WarningVariable, WhatIf, WithImportance}

Remove-MessageClassification {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-RemoteDomain {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-TransportRule {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Set-SystemMessage {Confirm, ErrorAction, ErrorVariable, Identity, Name, Original, OutBuffer, OutVariable, Text, WarningAction, WarningVariable, WhatIf}


47

Transport Rules

Cmdlet Parameters

Set-TransportConfig {ClearCategories, Confirm, ErrorAction, ErrorVariable, ExternalPostmasterAddress, Identity, OutBuffer, OutVariable, VoicemailJournalingEnabled, WarningAction, WarningVariable, WhatIf}

Set-TransportRule

{AdComparisonAttribute, AdComparisonOperator, AddManagerAsRecipientType, AddToRecipients, AnyOfCcHeader, AnyOfCcHeaderMemberOf, AnyOfRecipientAddressContainsWords, AnyOfRecipientAddressMatchesPatterns, AnyOfToCcHeader, AnyOfToCcHeaderMemberOf, AnyOfToHeader, AnyOfToHeaderMemberOf, ApplyClassification, ApplyHtmlDisclaimerFallbackAction, ApplyHtmlDisclaimerLocation, ApplyHtmlDisclaimerText, ApplyRightsProtectionTemplate, AttachmentContainsWords, AttachmentIsUnsupported, AttachmentMatchesPatterns, AttachmentNameMatchesPatterns, AttachmentSizeOver, BetweenMemberOf1, BetweenMemberOf2, BlindCopyTo, Comments, Confirm, CopyTo, Debug, DeleteMessage, DomainController, ErrorAction, ErrorVariable, ExceptIfAdComparisonAttribute, ExceptIfAdComparisonOperator, ExceptIfAnyOfCcHeader, ExceptIfAnyOfCcHeaderMemberOf, ExceptIfAnyOfRecipientAddressContainsWords, ExceptIfAnyOfRecipientAddressMatchesPatterns, ExceptIfAnyOfToCcHeader, ExceptIfAnyOfToCcHeaderMemberOf, ExceptIfAnyOfToHeader, ExceptIfAnyOfToHeaderMemberOf, ExceptIfAttachmentContainsWords, ExceptIfAttachmentIsUnsupported, ExceptIfAttachmentMatchesPatterns, ExceptIfAttachmentNameMatchesPatterns, ExceptIfAttachmentSizeOver, ExceptIfBetweenMemberOf1, ExceptIfBetweenMemberOf2, ExceptIfFrom, ExceptIfFromAddressContainsWords, ExceptIfFromAddressMatchesPatterns, ExceptIfFromMemberOf, ExceptIfFromScope, ExceptIfHasClassification, ExceptIfHasNoClassification, ExceptIfHeaderContainsMessageHeader, ExceptIfHeaderContainsWords, ExceptIfHeaderMatchesMessageHeader, ExceptIfHeaderMatchesPatterns, ExceptIfManagerAddresses, ExceptIfManagerForEvaluatedUser, ExceptIfMessageTypeMatches, ExceptIfRecipientADAttributeContainsWords, ExceptIfRecipientADAttributeMatchesPatterns, ExceptIfRecipientAddressContainsWords, ExceptIfRecipientAddressMatchesPatterns, ExceptIfSCLOver, ExceptIfSenderADAttributeContainsWords, ExceptIfSenderADAttributeMatchesPatterns, ExceptIfSenderManagementRelationship, ExceptIfSentTo, ExceptIfSentToMemberOf, ExceptIfSentToScope, ExceptIfSubjectContainsWords, ExceptIfSubjectMatchesPatterns, ExceptIfSubjectOrBodyContainsWords, ExceptIfSubjectOrBodyMatchesPatterns, ExceptIfWithImportance, From, FromAddressContainsWords, FromAddressMatchesPatterns, FromMemberOf, FromScope, HasClassification, HasNoClassification, HeaderContainsMessageHeader, HeaderContainsWords, HeaderMatchesMessageHeader, HeaderMatchesPatterns, Identity, ManagerAddresses, MessageTypeMatches, Name, OutBuffer, OutVariable, PrependSubject, Priority, RecipientADAttributeContainsWords, RecipientADAttributeMatchesPatterns, RecipientAddressContainsWords, RecipientAddressMatchesPatterns, RedirectMessageTo, RejectMessageEnhancedStatusCode, RejectMessageReasonText, RemoveHeader, SCLOver, SenderADAttributeContainsWords, SenderADAttributeMatchesPatterns, SenderManagementRelationship, SentTo, SentToMemberOf, SentToScope, SetHeaderName, SetHeaderValue, SetSCL, SmtpRejectMessageRejectStatusCode, SmtpRejectMessageRejectText, SubjectContainsWords, SubjectMatchesPatterns, SubjectOrBodyContainsWords, SubjectOrBodyMatchesPatterns, Verbose, WarningAction, WarningVariable, WhatIf, WithImportance}

Set-RemoteDomain

{AllowedOOFType, AutoForwardEnabled, AutoReplyEnabled, ByteEncoderTypeFor7BitCharsets, CharacterSet, Confirm, ContentType, Debug, DeliveryReportEnabled, DisplaySenderName, DomainController, ErrorAction, ErrorVariable, Identity, IsCoexistenceDomain, IsInternal, LineWrapSize, MeetingForwardNotificationEnabled, Name, NDRDiagnosticInfoEnabled, NDREnabled, NonMimeCharacterSet, OutBuffer, OutVariable, PreferredInternetCodePageForShiftJis, RequiredCharsetCoverage, TargetDeliveryDomain, TNEFEnabled, TrustedMailInboundEnabled, TrustedMailOutboundEnabled, UseSimpleDisplayName, Verbose, WarningAction, WarningVariable, WhatIf}


48

Transport Rules

Cmdlet Parameters

Set-MessageClassification

{ClassificationID, Confirm, Debug, DisplayName, DisplayPrecedence, DomainController, ErrorAction, ErrorVariable, Identity, Name, OutBuffer, OutVariable, PermissionMenuVisible, RecipientDescription, RetainClassificationEnabled, SenderDescription, Verbose, WarningAction, WarningVariable, WhatIf}


Return to list

User MRM Management

Cmdlet Parameters



Get-Contact



Get-Mailbox


Get-MailContact


Get-MailUser {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}

Get-ManagedContentSettings {Debug, DomainController, ErrorAction, ErrorVariable, FolderName, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-ManagedFolder {Debug, DomainController, ErrorAction, ErrorVariable, Identity, Mailbox, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-ManagedFolderMailboxPolicy {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


Get-Recipient

{Anr, BookmarkDisplayName, ErrorAction, ErrorVariable, Filter, Identity, IncludeBookmarkObject, OrganizationalUnit, OutBuffer, OutVariable, PropertySet, RecipientType, RecipientTypeDetails, ResultSize, SortBy, WarningAction, WarningVariable}


49

User MRM Management

Cmdlet Parameters

Get-RetentionPolicy {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-RetentionPolicyTag {Debug, DomainController, ErrorAction, ErrorVariable, Identity, IncludeSystemTags, Mailbox, OptionalInMailbox, OutBuffer, OutVariable, Types, Verbose, WarningAction, WarningVariable}



Set-Mailbox

{Debug, DomainController, EndDateForRetentionHold, ErrorAction, ErrorVariable, Identity, ManagedFolderMailboxPolicy, OutBuffer, OutVariable, RemoveManagedFolderAndPolicy, RetentionComment, RetentionHoldEnabled, RetentionPolicy, RetentionUrl, StartDateForRetentionHold, Verbose, WarningAction, WarningVariable, WhatIf}


New-RetentionPolicyTag

{AddressForJournaling, AgeLimitForRetention, Comment, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, JournalingEnabled, LabelForJournaling, LocalizedComment, LocalizedRetentionPolicyTagName, ManagedFolderToUpgrade, MessageClass, MessageFormatForJournaling, MustDisplayCommentEnabled, Name, OutBuffer, OutVariable, RetentionAction, RetentionEnabled, RetentionId, SystemTag, Type, Verbose, WarningAction, WarningVariable, WhatIf}

Set-RetentionPolicyTag

{AddressForJournaling, AgeLimitForRetention, Comment, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Force, Identity, JournalingEnabled, LabelForJournaling, LegacyManagedFolder, LocalizedComment, LocalizedRetentionPolicyTagName, Mailbox, MessageClass, MessageFormatForJournaling, MustDisplayCommentEnabled, Name, OptionalInMailbox, OutBuffer, OutVariable, RetentionAction, RetentionEnabled, RetentionId, SystemTag, Verbose, WarningAction, WarningVariable, WhatIf}

Stop-ManagedFolderAssistant {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-ManagedFolderMailboxPolicy {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Force, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Start-ManagedFolderAssistant {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, HoldCleanup, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Set-ManagedFolder

{BaseFolderOnly, Comment, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, FolderName, Identity, LocalizedComment, LocalizedFolderName, MustDisplayCommentEnabled, Name, OutBuffer, OutVariable, StorageQuota, Verbose, WarningAction, WarningVariable, WhatIf}

New-RetentionPolicy {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Name, OutBuffer, OutVariable, RetentionId, RetentionPolicyTagLinks, Verbose, WarningAction, WarningVariable, WhatIf}

New-ManagedFolderMailboxPolicy {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, ManagedFolderLinks, Name, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-RetentionPolicy {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Force, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-ManagedContentSettings {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}


50

User MRM Management

Cmdlet Parameters

Set-RetentionPolicy {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Force, Identity, Name, OutBuffer, OutVariable, RetentionId, RetentionPolicyTagLinks, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-RetentionPolicyTag {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Set-ManagedFolderMailboxPolicy {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, ManagedFolderLinks, Name, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-ManagedFolder {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

New-ManagedContentSettings

{AddressForJournaling, AgeLimitForRetention, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, FolderName, JournalingEnabled, LabelForJournaling, MessageClass, MessageFormatForJournaling, MoveToDestinationFolder, Name, OutBuffer, OutVariable, RetentionAction, RetentionEnabled, TriggerForRetention, Verbose, WarningAction, WarningVariable, WhatIf}

New-ManagedFolder

{BaseFolderOnly, Comment, Confirm, Debug, DefaultFolderType, DomainController, ErrorAction, ErrorVariable, FolderName, LocalizedComment, LocalizedFolderName, MustDisplayCommentEnabled, Name, OutBuffer, OutVariable, StorageQuota, Verbose, WarningAction, WarningVariable, WhatIf}

Set-ManagedContentSettings

{AddressForJournaling, AgeLimitForRetention, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, JournalingEnabled, LabelForJournaling, MessageFormatForJournaling, MoveToDestinationFolder, Name, OutBuffer, OutVariable, RetentionAction, RetentionEnabled, TriggerForRetention, Verbose, WarningAction, WarningVariable, WhatIf}

Return to list

VO Admin

Cmdlet Parameters




Get-AddressList {Container, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


Get-AvailabilityAddressSpace {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


51

VO Admin

Cmdlet Parameters

Get-CalendarDiagnosticLog {Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity, LogLocation, MeetingID, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Subject, Verbose, WarningAction, WarningVariable}


Get-CalendarProcessing {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Verbose, WarningAction, WarningVariable}

Get-CASMailbox


Get-Contact








Get-Group


Get-InboxRule {Debug, DescriptionTimeFormat, DescriptionTimeZone, DomainController, ErrorAction, ErrorVariable, Identity, Mailbox, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-LogonStatistics {Database, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Server, Verbose, WarningAction, WarningVariable}

Get-Mailbox

{Anr, Arbitration, Archive, Credential, Database, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, RemoteArchive, ResultSize, Server, SortBy, Verbose, WarningAction, WarningVariable}


Get-MailboxCalendarConfiguration {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


52

VO Admin

Cmdlet Parameters

Get-MailboxCalendarFolder {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-MailboxComplianceConfiguration


Get-MailboxFolderPermission {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, User, Verbose, WarningAction,WarningVariable}

Get-MailboxFolderStatistics {Archive, Debug, DomainController, ErrorAction, ErrorVariable, FolderScope, Identity, IncludeAnalysis, IncludeOldestAndNewestItems, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-MailboxJunkEmailConfiguration {Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Verbose, WarningAction, WarningVariable}

Get-MailboxMessageConfiguration {Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Verbose, WarningAction, WarningVariable}


Get-MailboxRegionalConfiguration {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, VerifyDefaultFolderNameLanguage, WarningAction, WarningVariable}

Get-MailboxSpellingConfiguration {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-MailboxStatistics {Archive, Database, Debug, DomainController, ErrorAction, ErrorVariable, Identity, IncludeMoveHistory, IncludeMoveReport, OutBuffer, OutVariable, Server, Verbose, WarningAction, WarningVariable}

Get-MailContact


Get-MailPublicFolder {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Server, SortBy, Verbose, WarningAction, WarningVariable}

Get-MailUser


Get-ManagementRole {Cmdlet, CmdletParameters, Debug, DomainController, ErrorAction, ErrorVariable, GetChildren, Identity, OutBuffer, OutVariable, Recurse, RoleType, Script, ScriptParameters, Verbose, WarningAction, WarningVariable}

Get-ManagementRoleAssignment

{AssignmentMethod, ConfigWriteScope, CustomConfigWriteScope, CustomRecipientWriteScope, Debug, Delegating, DomainController, Enabled, ErrorAction, ErrorVariable, Exclusive, ExclusiveConfigWriteScope, ExclusiveRecipientWriteScope, GetEffectiveUsers, Identity, OutBuffer, OutVariable, RecipientOrganizationalUnitScope, RecipientWriteScope, Role, RoleAssignee, RoleAssigneeType, Verbose, WarningAction, WarningVariable, WritableRecipient}


53

VO Admin

Cmdlet Parameters

Get-ManagementRoleEntry {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Parameters, PSSnapinName, Type, Verbose, WarningAction, WarningVariable}

Get-MessageTrackingLog {Debug, DomainController, End, ErrorAction, ErrorVariable,EventId, InternalMessageId, MessageId, MessageSubject, OutBuffer, OutVariable, Recipients, Reference, ResultSize, Sender, Server, Start, Verbose, WarningAction, WarningVariable}

Get-MessageTrackingReport

{BypassDelegateChecking, Debug, DetailLevel, DomainController, DoNotResolve, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, RecipientPathFilter, Recipients, ReportTemplate, ResultSize, Status, TraceLevel, Verbose, WarningAction, WarningVariable}

Get-MoveRequest

{BatchName, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity, MoveStatus, Offline, OrganizationalUnit, OutBuffer, OutVariable, Protect, RemoteHostName,ResultSize, SortBy, SourceDatabase, Suspend, SuspendWhenReadyToComplete, TargetDatabase, Verbose, WarningAction, WarningVariable}

Get-MoveRequestStatistics {Debug, DomainController, ErrorAction, ErrorVariable, Identity, IncludeReport, MailboxGuid, MoveRequestQueue, MRSInstance, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}


Get-OrganizationRelationship {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-Recipient




Get-RoleGroup {Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, ShowPartnerLinked, SortBy, Verbose, WarningAction, WarningVariable}

Get-RoleGroupMember {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Verbose, WarningAction, WarningVariable}


Get-UMCallDataRecord {Debug, DomainController, ErrorAction, ErrorVariable, Mailbox, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-UMMailbox


Get-UMMailboxConfiguration {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable}

Get-UMMailboxPIN {Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity, IgnoreDefaultScope, IgnoreErrors, OutBuffer, OutVariable, ReadFromDomainController, ResultSize, Verbose, WarningAction, WarningVariable}


54

VO Admin

Cmdlet Parameters

Get-User

{Anr, Arbitration, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController, RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}

Search-MessageTrackingReport

{BypassDelegateChecking, Confirm, Debug, DomainController,DoNotResolve, ErrorAction, ErrorVariable, Identity, MessageEntryId, MessageId, OutBuffer, OutVariable, Recipients, ResultSize, Sender, Subject, TraceLevel, Verbose, WarningAction, WarningVariable, WhatIf}



Return to list


55

Optional Feature Role Groups

Litigation Hold

Cmdlet Parameters

Enable-Mailbox {IgnoreExistingArchive}


WarningVariable}

Get-DistributionGroup {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter,

Identity, IgnoreDefaultScope, ManagedBy, OrganizationalUnit, OutBuffer, OutVariable,

ReadFromDomainController, RecipientTypeDetails, ResultSize, SortBy, Verbose,

WarningAction,WarningVariable}



Get-DynamicDistributionGroup {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter,



WarningVariable}

Get-MailboxFolderPermission {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,

OutVariable, User, Verbose, WarningAction, WarningVariable}

Get-LogonStatistics {Database, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,

OutVariable, Server, Verbose, WarningAction, WarningVariable}

Get-Mailbox {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter,

Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable,



Get-MailboxDatabase {Debug, DomainController, DumpsterStatistics, ErrorAction, ErrorVariable, Identity,

IncludePreExchange2010, OutBuffer, OutVariable, Server, Status, Verbose,


Get-MailboxStatistics {Archive, Database, Debug, DomainController, ErrorAction, ErrorVariable, Identity,

OutBuffer, OutVariable, Server, Verbose, WarningAction, WarningVariable}

Get-MailContact {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter,




Get-MailUser {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter,



WarningVariable}

Get-Recipient {Anr, BookmarkDisplayName, Credential, Debug, DomainController, ErrorAction,

ErrorVariable, Filter, Identity, IgnoreDefaultScope, IncludeBookmarkObject,

OrganizationalUnit, OutBuffer, OutVariable, PropertySet, ReadFromDomainController,

RecipientPreviewFilter, RecipientType, RecipientTypeDetails, ResultSize, SortBy,


Get-SecurityPrincipal {Debug, DomainController, ErrorAction, ErrorVariable, Filter, Identity,

IncludeDomainLocalFrom, OrganizationalUnit, OutBuffer, OutVariable, ResultSize,

RoleGroupAssignable, Types, Verbose, WarningAction, WarningVariable}


56

Litigation Hold

Cmdlet Parameters

Get-Trust {Debug, DomainName, ErrorAction, ErrorVariable, OutBuffer, OutVariable, Verbose,


Get-User {Anr, Arbitration, Credential, Debug, DomainController, ErrorAction, ErrorVariable,

Filter, Identity, IgnoreDefaultScope, OrganizationalUnit, OutBuffer, OutVariable,


WarningAction, WarningVariable Anr, Credential, Debug, DomainController,


OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController,

RecipientTypeDetails, ResultSize, SortBy, Verbose, WarningAction, WarningVariable}





Set-Mailbox {Identity, LitigationHoldDate, LitigationHoldEnabled, LitigationHoldOwner,

ManagedFolderMailboxPolicy, RemoveManagedFolderAndPolicy, RetentionComment,

RetentionPolicy, RetentionUrl, SingleItemRecoveryEnabled, Confirm, Debug,

DomainController, ErrorAction, ErrorVariable, Force, OutBuffer, OutVariable,

RetainDeletedItemsFor, UseDatabaseRetentionDefaults, Verbose, WarningAction,




Return to list

MyMailboxDelegation

Cmdlet Parameters

Set-Mailbox {GrantSendOnBehalfTo, Identity}

Get-Mailbox {Anr, Archive, Credential, Debug, DomainController, ErrorAction, ErrorVariable,


ReadFromDomainController, RecipientTypeDetails, ResultSize, Server, SortBy, Verbose,


Return to list

UM Management

Cmdlet Parameters

Disable-UMAutoAttendant {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,


Disable-UMIPGateway {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, Immediate,

OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}


57

UM Management

Cmdlet Parameters

Disable-UMMailbox {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity,

IgnoreDefaultScope, KeepProperties, OutBuffer, OutVariable, Verbose, WarningAction,


Enable-UMAutoAttendant {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,


Enable-UMIPGateway {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,


Enable-UMMailbox {AutomaticSpeechRecognitionEnabled, Confirm, Debug, DomainController, ErrorAction,

ErrorVariable, Extensions, Identity, IgnoreDefaultScope, NotifyEmail, OutBuffer,

OutVariable, PilotNumber, Pin, PinExpired, SIPResourceIdentifier, UMMailboxPolicy,

ValidateOnly, Verbose, WarningAction, WarningVariable, WhatIf}

Export-UMCallDataRecord {ClientStream, Confirm, Date, Debug, DomainController, ErrorAction, ErrorVariable,

OutBuffer, OutVariable, UMDialPlan, UMIPGateway, Verbose, WarningAction,


Export-UMPrompt {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, OutBuffer,

OutVariable, PromptFileName, UMAutoAttendant, UMDialPlan, Verbose, WarningAction,


Get-AddressList {Container, Debug, DomainController, ErrorAction, ErrorVariable, Identity,



WarningVariable}

Get-Contact {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter,




Get-DistributionGroup {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter,






Get-DynamicDistributionGroup {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter,



WarningVariable}

Get-ExchangeCertificate {Debug, DomainController, DomainName, ErrorAction, ErrorVariable, Instance,

OutBuffer, OutVariable, Server, Thumbprint, Verbose, WarningAction, WarningVariable}

Get-Mailbox {Anr, Arbitration, Archive, Credential, Database, Debug, DomainController,


OrganizationalUnit, OutBuffer, OutVariable, ReadFromDomainController,

RecipientTypeDetails, RemoteArchive, ResultSize, Server, SortBy, Verbose,


Get-MailboxJunkEmailConfiguration {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,

OutVariable, Verbose, WarningAction}


58

UM Management

Cmdlet Parameters

Get-MailContact {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter,




Get-MailUser {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter,



WarningVariable}

Get-OrganizationalUnit {Debug, DomainController, ErrorAction, ErrorVariable, Identity, IncludeContainers,

OutBuffer, OutVariable, SingleNodeOnly, Verbose, WarningAction, WarningVariable}

Get-ResourceConfig {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,


Get-Recipient {Anr, BookmarkDisplayName, Credential, Debug, DomainController, ErrorAction,

ErrorVariable, Filter, Identity, IgnoreDefaultScope, IncludeBookmarkObject,

OrganizationalUnit, OutBuffer, OutVariable, PropertySet, ReadFromDomainController,

RecipientPreviewFilter, RecipientType, RecipientTypeDetails, ResultSize, SortBy,


Get-UMActiveCalls {Debug, DialPlan, DomainController, ErrorAction, ErrorVariable, InstanceServer,

IPGateway, OutBuffer, OutVariable, Server, Verbose, WarningAction, WarningVariable}

Get-UMAutoAttendant {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,

OutVariable, UMDialPlan, Verbose, WarningAction, WarningVariable}

Get-UMIPGateway {Debug, DomainController, ErrorAction, ErrorVariable, Identity, IncludeSimulator,


Get-UMMailbox {Anr, Credential, Debug, DomainController, ErrorAction, ErrorVariable, Filter,



WarningVariable}

Get-UMMailboxPIN {Credential, Debug, DomainController, ErrorAction, ErrorVariable, Identity,

IgnoreDefaultScope, IgnoreErrors, OutBuffer, OutVariable, ReadFromDomainController,

ResultSize, Verbose, WarningAction, WarningVariable}

Get-UMMailboxPolicy {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,

OutVariable, UMDialPlan, Verbose, WarningAction, WarningVariable}

Get-UMCallSummaryReport {Debug, DomainController, ErrorAction, ErrorVariable, GroupBy, OutBuffer,

OutVariable, UMDialPlan, UMIPGateway, Verbose, WarningAction, WarningVariable}

Get-UMCallDataRecord {Debug, DomainController, ErrorAction, ErrorVariable, Mailbox, OutBuffer,


Get-UMDialPlan {Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,


Get-UMHuntGroup {DomainController, Identity, UMDialPlan}

Get-UMIPGateway {DomainController, Identity, IncludeSimulator}

Get-User {Anr, Arbitration, Credential, Debug, DomainController, ErrorAction, ErrorVariable,





59

UM Management

Cmdlet Parameters

Import-UMPrompt {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, OutBuffer,

OutVariable, PromptFileData, PromptFileName, PromptFileStream, UMAutoAttendant,

UMDialPlan, Verbose, WarningAction, WarningVariable, WhatIf}

New-UMAutoAttendant {Confirm, Debug, DomainController, DTMFFallbackAutoAttendant, ErrorAction,

ErrorVariable, Name, OutBuffer, OutVariable, PilotIdentifierList, SpeechEnabled,

Status, UMDialPlan, Verbose, WarningAction, WarningVariable, WhatIf}

New-UMDialPlan {AccessTelephoneNumbers, Confirm, CountryOrRegionCode, Debug, DefaultLanguage,

DomainController, ErrorAction, ErrorVariable, FaxEnabled, GenerateUMMailboxPolicy,

Name, NumberOfDigitsInExtension, OutBuffer, OutVariable, URIType, Verbose,

VoIPSecurity, WarningAction, WarningVariable, WhatIf}

New-UMHuntGroup { Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Name, OutBuffer, OutVariable, PilotIdentifier, UMDialPlan, UMIPGateway, Verbose, WarningAction,


New-UMIPGateway {Address, Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Name,

OutBuffer, OutVariable, UMDialPlan, Verbose, WarningAction, WarningVariable, WhatIf}

New-UMMailboxPolicy {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Name, OutBuffer,

OutVariable, UMDialPlan, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-UMAutoAttendant {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,


Remove-UMDialPlan {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,


Remove-UMHuntGroup { Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer, OutVariable, Verbose, WarningAction, WarningVariable, WhatIf}

Remove-UMIPGateway {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,


Remove-UMMailboxPolicy {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity, OutBuffer,






Set-UMAutoAttendant {AfterHoursKeyMapping, AfterHoursKeyMappingEnabled,

AfterHoursMainMenuCustomPromptEnabled, AfterHoursMainMenuCustomPromptFilename,

AfterHoursTransferToOperatorEnabled, AfterHoursWelcomeGreetingEnabled,

AfterHoursWelcomeGreetingFilename, AllowDialPlanSubscribers,

AllowedInCountryOrRegionGroups, AllowedInternationalGroups, AllowExtensions,

BusinessHoursKeyMapping, BusinessHoursKeyMappingEnabled,

BusinessHoursMainMenuCustomPromptEnabled, BusinessHoursMainMenuCustomPromptFilename,

BusinessHoursSchedule, BusinessHoursTransferToOperatorEnabled,

BusinessHoursWelcomeGreetingEnabled, BusinessHoursWelcomeGreetingFilename,

BusinessLocation, BusinessName, CallSomeoneEnabled, Confirm, ContactAddressList,

ContactRecipientContainer, ContactScope, Debug, DomainController,

DTMFFallbackAutoAttendant, ErrorAction, ErrorVariable, ForceUpgrade,

HolidaySchedule, Identity, InfoAnnouncementEnabled, InfoAnnouncementFilename,

Language, MatchedNameSelectionMethod, Name, NameLookupEnabled, OperatorExtension,

OutBuffer, OutVariable, PilotIdentifierList, SendVoiceMsgEnabled, SpeechEnabled,

TimeZone, TimeZoneName, Verbose, WarningAction, WarningVariable, WeekStartDay,

WhatIf}


60

UM Management

Cmdlet Parameters

Set-UMDialPlan {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity,

InfoAnnouncementEnabled, InfoAnnouncementFilename, Verbose, WarningAction,

WarningVariable, WelcomeGreetingEnabled, WelcomeGreetingFilename, WhatIf

AccessTelephoneNumbers, AllowDialPlanSubscribers, AllowedInCountryOrRegionGroups,

AllowedInternationalGroups, AllowExtensions,

AllowHeuristicADCallingLineIdResolution, AudioCodec,

AutomaticSpeechRecognitionEnabled, CallAnsweringRulesEnabled, CallSomeoneEnabled,

ConfiguredInCountryOrRegionGroups, ConfiguredInternationalGroups, Confirm,

ContactAddressList, ContactRecipientContainer, ContactScope, CountryOrRegionCode,

Debug, DefaultLanguage, DialByNamePrimary, DialByNameSecondary, DomainController,

EquivalentDialPlanPhoneContexts, ErrorAction, ErrorVariable, Extension, FaxEnabled,

ForceUpgrade, Identity, InCountryOrRegionNumberFormat, InfoAnnouncementEnabled,

InfoAnnouncementFilename, InputFailuresBeforeDisconnect, InternationalAccessCode,

InternationalNumberFormat, LegacyPromptPublishingPoint,

LogonFailuresBeforeDisconnect, MatchedNameSelectionMethod, MaxCallDuration,

MaxRecordingDuration, Name, NationalNumberPrefix, NumberingPlanFormats,

OperatorExtension, OutBuffer, OutsideLineAccessCode, OutVariable,

PilotIdentifierList, RecordingIdleTimeout, SendVoiceMsgEnabled,

TUIPromptEditingEnabled, UMAutoAttendant, Verbose, VoIPSecurity, WarningAction,

WarningVariable, WelcomeGreetingEnabled, WelcomeGreetingFilename, WhatIf}

Set-UMIPGateway {Address, Confirm, Debug, DelayedSourcePartyInfoEnabled, DomainController,

ErrorAction, ErrorVariable, ForceUpgrade, Identity, MessageWaitingIndicatorAllowed,

Name, OutBuffer, OutcallsAllowed, OutVariable, Port, Simulator, Status, Verbose,


Set-UMMailbox {AllowUMCallsFromNonUsers, AnonymousCallersCanLeaveMessages,

AutomaticSpeechRecognitionEnabled, CallAnsweringAudioCodec,

CallAnsweringRulesEnabled, Confirm, Debug, DomainController, ErrorAction,

ErrorVariable, FaxEnabled, Identity, IgnoreDefaultScope,

MissedCallNotificationEnabled, Name, OperatorNumber, OutBuffer, OutVariable,

PinlessAccessToVoiceMailEnabled, PlayOnPhoneEnabled, SubscriberAccessEnabled,

TUIAccessToCalendarEnabled, TUIAccessToEmailEnabled, UMMailboxPolicy,

UMSMSNotificationOption, Verbose, WarningAction, WarningVariable, WhatIf}

Set-UMMailboxPIN {Confirm, Debug, DomainController, ErrorAction, ErrorVariable, Identity,

IgnoreDefaultScope, LockedOut, NotifyEmail, OutBuffer, OutVariable, Pin, PinExpired,

SendEmail, Verbose, WarningAction, WarningVariable, WhatIf}


61

UM Management

Cmdlet Parameters

Set-UMMailboxPolicy {AllowAutomaticSpeechRecognition, AllowCallAnsweringRules, AllowCommonPatterns,

AllowDialPlanSubscribers, AllowedInCountryOrRegionGroups,

AllowedInternationalGroups, AllowExtensions, AllowFax, AllowMessageWaitingIndicator,

AllowMissedCallNotifications, AllowPinlessVoiceMailAccess, AllowPlayOnPhone,

AllowSMSNotification, AllowSubscriberAccess, AllowTUIAccessToCalendar,

AllowTUIAccessToDirectory, AllowTUIAccessToEmail, AllowTUIAccessToPersonalContacts,

AllowVoiceMailAnalysis, AllowVoiceMailPreview,

AllowVoiceResponseToOtherMessageTypes, Confirm, Debug, DomainController,

ErrorAction, ErrorVariable, FaxMessageText, FaxServerURI, ForceUpgrade, Identity,

InformCallerOfVoiceMailAnalysis, LogonFailuresBeforePINReset, MaxGreetingDuration,

MaxLogonAttempts, MinPINLength, Name, OutBuffer, OutVariable, PINHistoryCount,

PINLifetime, ProtectAuthenticatedVoiceMail, ProtectedVoiceMailText,

ProtectUnauthenticatedVoiceMail, RequireProtectedPlayOnPhone, ResetPINText,

SourceForestPolicyNames, UMDialPlan, UMEnabledText, Verbose,

VoiceMailPreviewPartnerAddress, VoiceMailPreviewPartnerAssignedID,

VoiceMailPreviewPartnerMaxDeliveryDelay, VoiceMailPreviewPartnerMaxMessageDuration,

VoiceMailText, WarningAction, WarningVariable, WhatIf}

Test-UMConnectivity {CertificateThumbprint, Confirm, Debug, DiagDtmfDurationInMilisecs,

DiagDtmfSequence, DiagInitialSilenceInMilisecs, DiagInterDtmfDiffGapInMilisecs,

DiagInterDtmfGapInMilisecs, DomainController, ErrorAction, ErrorVariable, From,

ListenPort, MediaSecured, MonitoringContext, OutBuffer, OutVariable, Phone, PIN,

RemotePort, ResetPIN, Secured, Timeout, TUILogon, TUILogonAll, UMDialPlan,

UMIPGateway, Verbose, WarningAction, WarningVariable, WhatIf}



Return to list


62

Appendix B:

Exchange Control Panel administration features Described below is a summary of the current available ECP administration features. To utilize the ECP feature, a user

must be a member of the required Universal Security Group (a.k.a. “role group”) associated with the feature described

in Appendix A.

Note Self-service administration details for specific Exchange Online features can be found in a corresponding Feature Guide held within the Release Documentation & Training Materials area of the Customer Extranet site for dedicated & ITAR-support plan customers – see links on the Exchange Online landing page.

Delivery Reports. Using ECP, end users are able to perform a custom search to obtain a report of messages

delivered to, or received from, specific mail addresses. IT professionals assigned appropriate role-based access

control (RBAC) permissions can view messaging tracking information for multiple users. Allowing users to view

this information using self-service administration helps to reduce one of the most common types of Service

Desk calls. The amount of delivery report data held within Exchange Online will vary based upon storage

constraints; typically one week of information is available.

Multi-Mailbox Search. Compliance and security officials assigned appropriate RBAC permissions can search a

variety of mailbox items including email, attachments, calendar appointments, tasks, and contacts through ECP.

Litigation Hold. ECP can be used to place a specific user mailbox in legal hold or to disable the setting.

Remote Device Wipe. With this ECP feature, users can manage the process of remotely erasing lost, stolen, or

otherwise compromised mobile devices.

ActiveSync device and policy management. Using ECP, administrators can carry out a variety of tasks related

to Exchange ActiveSync mobile phones and devices. These tasks include the following:

o Manage the default access level for all or specific mobile phones and devices.

o Set up email alerts when a mobile phone or device is quarantined.

o Personalize the message that users receive when their mobile phone or device is either recognized or

quarantined.

o Provide a list of quarantined mobile phones or devices.

o Create and manage Exchange ActiveSync device access rules.

MailTips. With this feature, informative messages are displayed to users while they are composing a message.

These messages, which provide information about the recipient to help avoid non-delivery reports (NDRs), can

be configured using ECP.

Resource Booking Agent. Within ECP, reservation or delegation settings can be set on a resource mailbox

which represents a meeting room mailbox or an equipment mailbox. A resource mailbox can be configured, for

example, to designate users who can reserve the resource without approval or to prevent users from scheduling

repeating reservations. Attributes representing room capacity and the ability for Exchange Online to

automatically accept or decline booking requests can be configured.

Transport Rule Management. Transport rules provide the ability to apply messaging policies and message

hygiene restrictions consistently to email messages as they pass through the transport pipeline during message

delivery. Using ECP, transport rules can be created using drop-down menu selections.


Self-Service Administration in Exchange Online Dedicated...

Documents

Transcript of Self-Service Administration in Exchange Online Dedicated...