Self-Propelled Telescopic Booms - Genie PolskaUnited Kingdom and MESART The Maltings, Wharf Road,...
2
www.genielift.com/en-gb Self-Propelled Telescopic Booms Specifications SX-180 Model SX-180 * The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height. ** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings. *** Weight will vary depending on options and/or country standards. Range Of Motion SX-180 -20 ft -10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft 70 ft 80 ft 90 ft -6.1 m -3.05 m 0 m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m 18.29 m 21.34 m 24.38 m 27.42 m 190 ft 57.91 m 180 ft 54.86 m 170 ft 51.81 m 160 ft 48.77 m 150 ft 45.72 m 140 ft 42.67 m 130 ft 39.62 m 120 ft 36.58 m 110 ft 33.53 m 100 ft 30.48 m 90 ft 27.43 m 80 ft 24.38 m 70 ft 21.34 m 60 ft 18.29 m 50 ft 15.24 m 40 ft 12.19 m 30 ft 9.14 m 20 ft 6.1 m 10 ft 3.05 m 0 ft 0 m Measurements Metric US Working height maximum* 56.86 m 186 ft Platform height maximum 54.86 m 180 ft Horizontal reach maximum 24.38 m 80 ft Below ground reach 0.61 m 2 ft Platform length 0.91 m 3 ft Platform width 2.44 m 8 ft Height - stowed 3.05 m 10 ft Length - stowed 16.18 m 53 ft 1 in Length - transport (jib tucked under) 13 m 42 ft 8 in Width - axles retracted 2.49 m 8 ft 2 in Width - axles extended 5.03 m 16 ft 6 in Wheelbase - axles retracted 5.03 m 16 ft 6 in Wheelbase - axles extended 4.72 m 15 ft 6 in Ground clearance - center 0.38 m 1 ft 3 in Productivity Lift capacity 340 kg 750 lbs Platform rotation 160° 160° Vertical jib rotation 135° 135° Horizontal jib rotation 60° 60° Turntable rotation 360° continuous Turntable tailswing - axle retracted 1.14 m 3 ft 9 in Turntable tailswing - axle extended 1.06 m 3 ft 6 in Drive speed - stowed 4.02 km/h 2.5 mph Drive speed - out of stowed below 38.10 m (125 ft) 0.65 km/h 0.4 mph above 38.10 m (125 ft) 0.17 km/h 0.1 mph Gradeability - stowed** 35% 35% Turning radius - axle retracted: inside 6.28 m 20 ft 7 in outside 8.56 m 28 ft 1 in Turning radius - axle extended: inside 3.02 m 9 ft 11 in outside 7.34 m 24 ft 1 in Controls 12 V DC proportional Tyres 445/65D 22.5 18 ply foam-filled Power Power source Deutz Stage IIIA TD 2011 L04i 4-cylinder, 74 hp (55 kW), air cooled Deutz Stage IIIB TD 2.9L4 4-cylinder, 74 hp (55 kW), water cooled Auxiliary power unit 12 V DC 12 V DC Hydraulic tank capacity 416 L 110 gal Fuel tank capacity 189.3 L 50 gal Weight*** 4WD 24,948 kg 55,000 lbs Standards Compliance EU Directives: 2006/42/EC - Machinery Directive Harmonized Standards: EN280; 2004/108/EC (EMC); 2000/14/EC (Outdoor Noise) A B C D E F G A B C C D D E E F F G G -20 ft -15 Ft -10 ft -5ft 0 ft 5 ft 10 ft 15 ft 20 ft -6.1 m -4.57 m -3.05 m -1.52 m 0 m 1.52 3.05 m 4.57 m 6.1 m 20 ft 6.1 m 15 ft 4.57 m 10 ft 3.05 m 5 ft 1.52 m 0 ft 0 m -5 ft -1.52 m -10 ft -3.05 m -15 ft -4.57 m -20 ft -6.1 m
Transcript of Self-Propelled Telescopic Booms - Genie PolskaUnited Kingdom and MESART The Maltings, Wharf Road,...
www.genielift.com/en-gb
Self-Propelled Telescopic Booms
SpecificationsSX-180
Model SX-180
* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings.
*** Weight will vary depending on options and/or country standards.
Range Of Motion SX-180
-20 ft -10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft 70 ft 80 ft 90 ft -6.1 m -3.05 m 0 m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m 18.29 m 21.34 m 24.38 m 27.42 m
190 ft57.91 m
180 ft54.86 m
170 ft51.81 m
160 ft48.77 m
150 ft45.72 m
140 ft42.67 m
130 ft39.62 m
120 ft36.58 m
110 ft33.53 m
100 ft30.48 m
90 ft27.43 m
80 ft24.38 m
70 ft21.34 m
60 ft18.29 m
50 ft15.24 m
40 ft12.19 m
30 ft9.14 m
20 ft6.1 m
10 ft3.05 m
0 ft0 m
Measurements Metric US Working height maximum* 56.86 m 186 ft Platform height maximum 54.86 m 180 ftHorizontal reach maximum 24.38 m 80 ftBelow ground reach 0.61 m 2 ft Platform length 0.91 m 3 ft Platform width 2.44 m 8 ft Height - stowed 3.05 m 10 ft Length - stowed 16.18 m 53 ft 1 in Length - transport (jib tucked under) 13 m 42 ft 8 in Width - axles retracted 2.49 m 8 ft 2 in Width - axles extended 5.03 m 16 ft 6 in Wheelbase - axles retracted 5.03 m 16 ft 6 in Wheelbase - axles extended 4.72 m 15 ft 6 in Ground clearance - center 0.38 m 1 ft 3 in ProductivityLift capacity 340 kg 750 lbsPlatform rotation 160° 160°Vertical jib rotation 135° 135°Horizontal jib rotation 60° 60°Turntable rotation 360° continuousTurntable tailswing - axle retracted 1.14 m 3 ft 9 inTurntable tailswing - axle extended 1.06 m 3 ft 6 inDrive speed - stowed 4.02 km/h 2.5 mphDrive speed - out of stowed below 38.10 m (125 ft) 0.65 km/h 0.4 mph above 38.10 m (125 ft) 0.17 km/h 0.1 mphGradeability - stowed** 35% 35%Turning radius - axle retracted: inside 6.28 m 20 ft 7 in outside 8.56 m 28 ft 1 inTurning radius - axle extended: inside 3.02 m 9 ft 11 in outside 7.34 m 24 ft 1 inControls 12 V DC proportionalTyres 445/65D 22.5 18 ply foam-filled
PowerPower source Deutz Stage IIIA TD 2011 L04i 4-cylinder, 74 hp (55 kW), air cooled Deutz Stage IIIB TD 2.9L4 4-cylinder, 74 hp (55 kW), water cooled
Auxiliary power unit 12 V DC 12 V DCHydraulic tank capacity 416 L 110 gal Fuel tank capacity 189.3 L 50 gal
Weight***4WD 24,948 kg 55,000 lbs
Standards Compliance EU Directives: 2006/42/EC - Machinery Directive Harmonized Standards: EN280; 2004/108/EC (EMC); 2000/14/EC (Outdoor Noise)
A
B
C
D
E
F
G
A
B
C C
D D
E E
F F
G G
-20 ft -15 Ft -10 ft -5ft 0 ft 5 ft 10 ft 15 ft 20 ft -6.1 m -4.57 m -3.05 m -1.52 m 0 m 1.52 3.05 m 4.57 m 6.1 m
20 ft6.1 m
15 ft4.57 m
10 ft3.05 m
5 ft1.52 m
0 ft0 m
-5 ft-1.52 m
-10 ft-3.05 m
-15 ft-4.57 m
-20 ft-6.1 m
United Kingdom and MESARTThe Maltings, Wharf Road, Grantham NG31 6BH, T: +44 800 988 3739 (toll free), Fax +44 (0)1476 584334, Email [email protected] East, Southern Africa, Russia and Turkey, T: +971 4 399 0381, Email [email protected] Visit www.genielift.com/en-gb/about-genie/locations to view our global locations list.
Worldwide Manufacturing And DistributionAustralia · Brazil · Caribbean · Central America · China · France · Germany · Italy · Japan · Korea · Mexico · Russia · Southeast Asia · Spain · Sweden · United Arab Emirates · United Kingdom · United States
Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2019 Terex Corporation.
GEN0001 Updated: 04/19 www.genielift.com/en-gb
Features
Self-Propelled Telescopic BoomsSX-180
Platform• 2.44 m (8 ft) tri-entry platform with side
swing gate (standard)
Jib• 3.05 m (10 ft) rotating jib
Engine Options• Deutz Stage IIIA diesel 74 hp (55 kW)• Deutz Stage IIIB diesel 74 hp (55 kW)
Drive/Steer• 4 x 4 (standard)• 4 wheel steer (standard)
Axles• X-ChassisTM extendable axles (standard)
Tyres• Rough terrain foam-filled (standard)
Productivity Options • Half-mesh platform inserts • Platform auxiliary top rail• Hostile environment package (1)
• Dual axis joystick steering• Tool tray• Work lights package (2 on chassis,
2 on platform) (1)
• Biodegradable Hydraulic Oil (1)
• Airline to Platform (1)
• Anemometer• Chassis tilt lift function cut-out• Lockable platform control box
covers (1)
• Track & Trace (2) (GPS unit providing machine location & operating information)
• Operator Protective Structure (3)
Power Options• AC generator packages, both 7,5
kW (120V/50Hz with dual sockets in platform - 240-415V/50Hz 3 phase with 5 pole 3 phase socket and 240V socket)
• Cold Weather Packages (1)
• Diesel scrubber/spark arrestor muffler (catalytic muffler), Stage IIIA engine only(1)
• Intake air pre-cleaner (1)
Options & Accessories
MeasurementsSX-180• 57 m (186 ft) working height• 24.40 m (80 ft) horizontal reach• 340 kg (750 lb) lift capacity
Productivity• Self-leveling platform• 160° Hydraulic platform rotation• Proportional joystick controls• Hydraulic oil cooler• Thumb rocker steering• Chassis tilt drive function cut-out• Drive enable system• AC power to platform• Horn• Hour meter• Tilt alarm• Descent alarm• Alarm package• 360° continuous turntable rotation• Positive traction drive• Two speed wheel motors• Four wheel high angle steer• Four steering modes: front, rear, crab
and coordinated• Four wheel brakes• Ground control box cover• Welder Ready package• Engine status display• Telematics-Ready Connector• Lift Guard™ Contact Alarm
Power• All engines are emissions compliant• 7.5 kW generator- 415V/240V/50Hz (Europe)- 110V/55V/50Hz (UK)• 12 V DC auxiliary power• Anti-restart engine protection• Auto engine fault shutdown• Intake air heater• Engine gauge display
Easily Configured To Meet Your Needs Standard Features
(1) Factory-fit option only(2) Includes a first 2 years subscription(3) Aftermarket only
