SELECTING WHAT WOOD TO USE FOR YOUR SMOKER · Logs are full pieces of wood, like you would use in a...

6

Transcript of SELECTING WHAT WOOD TO USE FOR YOUR SMOKER · Logs are full pieces of wood, like you would use in a...

Page 1: SELECTING WHAT WOOD TO USE FOR YOUR SMOKER · Logs are full pieces of wood, like you would use in a fireplace or to build a campfire. These are best reserved for barbecuing in a pit
Page 2: SELECTING WHAT WOOD TO USE FOR YOUR SMOKER · Logs are full pieces of wood, like you would use in a fireplace or to build a campfire. These are best reserved for barbecuing in a pit

SELECTING WHAT WOOD TO USE FOR YOUR SMOKER

Smoke produced from charcoal will lend a very slight smokiness to food (the old, charcoal tastes

better than gas debate), but you need to step up your game if you want real flavor out of your grilling

medium.

Grilling with wood is one of the greatest advantages to cooking food over a fire in my book, providing

the unique opportunity to add a flavor that just can't be accomplished to the same degree inside a

kitchen. Unlike the past few days of tips, this is one that will require a bit more experimenting on your

part, since more variables are in play and taste for smoke is incredibly subjective. That being said,

here are some tips and advice to get you headed down the right path.

Chips vs. Chunks vs. Logs

Page 3: SELECTING WHAT WOOD TO USE FOR YOUR SMOKER · Logs are full pieces of wood, like you would use in a fireplace or to build a campfire. These are best reserved for barbecuing in a pit

The first order of business is choosing the right size of wood from three basic options: chips, chunks,

and logs.

Chips are scraps and shavings of wood that ignite quickly, but also burn out pretty fast. The biggest

advantage to these are they're more readily available in a wide variety in stores. Other than that, I find

the short burn time a reason to skip them unless totally necessary.

Chunks are usually about fist-size pieces of wood and my choice for getting things smoking. They

take longer to fully ignite than chips, but burn for a good hour in a grill, and hours in a smoker. For city

dwellers like myself, who may not have a natural supply of wood to forage from, chunks are sold

pretty inexpensively all over the internet.

Logs are full pieces of wood, like you would use in a fireplace or to build a campfire. These are best

reserved for barbecuing in a pit or with an offset smoker, but we're talking grilling, and I don't think

logs serve much of a use here. They take a long time to get to the point where you cook over them

and produce more smoke than you'll probably ever need when grilling.

Types of Wood

you always want a hardwoods—softwoods like pine and cedar create a nasty, sooty smoke

Page 4: SELECTING WHAT WOOD TO USE FOR YOUR SMOKER · Logs are full pieces of wood, like you would use in a fireplace or to build a campfire. These are best reserved for barbecuing in a pit

With the right size down, wood selection is up next. When picking a wood to grill with, you always

want a hardwoods—softwoods like pine and cedar create a nasty, sooty smoke that have the

potential to be dangerous to your health. Although each wood has its own unique flavor, without

tasting them side-by-side, it's usually too subtle to really distinguish. That's why it's best to pick wood

based on the level of smokiness it will impart, rather than obsessing over the minuteness of flavor. I

break smoking woods down to three general categories: mild, medium, and heavy.

Mild Woods

These include alder and fruitwoods like apple and cherry. The smokiness in these woods tend to be

mild, with hints of a fruitiness or sweetness. The mild woods pair best with more delicate meats like

chicken and fish, where a little smoke goes a long way.

Medium Woods

Oak and hickory are the workhorses of medium woods. Oak is my go-to wood for almost anything,

imparting that distinct smoke flavor without being overpowering. Hickory is heavier than oak, with a

stronger flavor that's good for larger cuts of meat and just about any barbecue. Both of these work

great with pork and beef—meats that can withstand stronger smokes.

Heavy Woods

This is really a special case for mesquite, which is strongest of all the smoke woods. The wood of

choice for Texas barbecue, because brisket is one of the few things that can stand up against the

hefty flavor imparted from mesquite.

Those examples is just the tip of the iceberg, and there are many more woods to mess around with.

With any wood though, but especially ones falling into the medium and heavy categories, take caution

not to use too much. Smoke can quickly overpower all other flavors, so if you're just getting started, I

recommended using one chunk at first and increasing the amount as you find the right balance of

smokiness—something that may also be achieved using a combination of woods.

Should I Soak the Wood?

The rule of thumb around my house is if it's chips, give them a bath, otherwise burn them dry.

Page 5: SELECTING WHAT WOOD TO USE FOR YOUR SMOKER · Logs are full pieces of wood, like you would use in a fireplace or to build a campfire. These are best reserved for barbecuing in a pit

Many grilling books and guides will recommended soaking of wood chips, chunks, and logs prior to

usage. The rule of thumb around my house is if it's chips, give them a bath, otherwise burn them dry.

With chips, soaking is a must—without some added moisture the chips will ignite and extinguish

before any real flavor can be delivered to the food. For chunks, I find soaking pretty unnecessary,

since they take a long time to fully burn out already and the added water just impedes the amount of

time it takes to get them started.

To soak wood chips, place the amount of chips you'll be using in a bowl and cover fully with water.

Allow to soak for 30 minutes before placing them over the coals.

Ignition

Like charcoal, hardwood needs to be ignited and burning properly before introducing the food. To do

this, place the wood on top of some hot coals and let it burn until its no longer flaming and is

producing smoke. For chips, this is almost immediate, while chunks will take a little bit of time to get

to the right stage, about 5 minutes depending on the type of wood and its size.

You can technically cook over hardwood exclusively, but for grilling, I think the best results are

achieved by burning just the right amount of wood needed over charcoal. This gives the ultimate

control between heat and smokiness that will keep foods coming out as perfect as possible.

Page 6: SELECTING WHAT WOOD TO USE FOR YOUR SMOKER · Logs are full pieces of wood, like you would use in a fireplace or to build a campfire. These are best reserved for barbecuing in a pit

The Smoke Ring

Although it's more prevalent in barbecue and you may never see it when grilling with wood, I want to

give a quick primer to the smoke ring—a pink discoloration at the surface of the meat which is too

often confused as a sign of it being undercooked. When cooking with smoke, especially for long

times, a chemical reaction happens between the smoke and meat. When nitrogen dioxide from wood

combustion mixes with the natural moisture in the meat, it forms nitric acid, causing the pink smoke

ring.

A smoke ring is a surefire way to tell if something has been properly barbecued, and although I doubt

it'll rear it's head in quickly grilled foods, if you happen to see it, it's definitely something to brag about

rather than fear.