Select a Product from this list. - Sweet Manufacturing...MTPH TPH CFH BPH MTPH TPH Material...
Transcript of Select a Product from this list. - Sweet Manufacturing...MTPH TPH CFH BPH MTPH TPH Material...
Select a Product from this list.
1. Bucket Elevator
2. Flite-Veyor® Horizontal Flat Bottom Drag Conveyor
3. Flite-Veyor® Incline Flat Bottom Drag Conveyor
4. Flite-Veyor® Round Bottom Drag Conveyor
5. Formed Channel Belt Conveyor
6. Quick-Key® Belt Conveyor
7. Silver Span® Support System
8. Goliath® I and II Support Tower
9. CalorMatic® Heat Processor
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALES
Standard V-belt Hollow Shaft Gearmotor Inline Hollow Shaft
Gearmotor R.A. Hollow Shaft Other Type of Unit
If Customer/Brand?
Date: Date:
No No
what percentage?
Yes No
what percentage?
Capacity:MTPH TPH
CFH BPH
in.
mm.
% of total
in.
mm.
% of total% of total
in.
mm.
MTPH TPH
Yes
what percentage?
Yes
mm.Average Lump Size:
% of total
CFH
Moisture Content:Yes No
what percentage?
lb/ft³
kg/m³
lb/ft³
kg/m³Material Density:
lb/ft³
kg/m³
BPH
kg/m³
in.
CFH BPH
MTPH TPH
CFH BPH
MTPH TPH
Material Characteristics (e.g, sticky, free
flowing, oily, hot, etc):
OPTIONAL ACCESSORIES DRIVE ASSEMBLY SPECIFICATIONSHead Service Platform?
Distributor Platform?
Yes No
Yes No
Ladder Required? Yes No #feet
Safety Cage Required? Yes No #feet
lb/ft³
Intermediate Platform? Yes No Qty:
PRODUCT SPECIFICATIONS Material #1 Material #2 (if applicable)
_____°F ____°C _____°F ____°C
Material #3 (if applicable) Material #4 (if applicable)
_____°F ____°C
Telephone: Telephone:
Material Description
Address: Address:
City/State/Zip Code: City/State/Zip Code:
BUCKET ELEVATOR QUOTATION REQUEST FORM #508CUSTOMER DEALER
Name:
P.O. BOX 1086
SPRINGFIELD, OHIO 45501
Phone: 937-325-1511 Fax: 937-322-1963
WWW.SWEETMFG.COM
RD. Straight One Side RD. Center Drop
Dimensions:
Name:
Material Temperature (Intake): _____°F ____°C
Sweet
E-mail: E-mail:
OtherMotor Supplied By:
If other, please specify:
Electric Service
If other, please specify:
Volts 230 380 460 575
30 / 286T
Belt/Speed Monitor?
No
If Customer/Brand?
Hertz 50 Hz 60 Hz
75 / 365T
20 / 256T 25 / 284T
60 / 364T
Guy Brackets?
600
Phase 1 Phase 3 Phase
Bearing Temp Monitor? Yes
250 / 447T
300 / 449T
40 / 324T
Discharge Transition
Liner:125 / 444T 150 / 445T
350 / 449T
10GA AR 200
³̸₁₆" AR 200 ¼" AR 200
Discharge transition to:
200 / 447T
Drive Location:
100 / 405T
Yes No Qty: Left Hand
HP/Frame
Size¼" Urethane 50 / 326T
¼" Hex Ceramic Liner
SQ. Straight One Side SQ. Center Drop
Right Hand
1 / 143T 1.5 / 145T 2 / 145T 3 / 182T 5 / 184T
7.5 / 213T 10 / 215T 15 / 254T
Belt Chain
Drive Type:
Backstop Required? Yes No
ELEVATOR SPECIFICATIONS Elevator Leg Type:
Belt Tracking Monitor?
ELEVATOR SPECIFICATIONS ELEVATOR SPECIFICATIONS
FORM 508 C:\Users\emcgill\Documents\QMS MASTER WORKBOOK 01-16 1 of 3
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALES
10 GA
¼"
MAXILIFT Continuous
Daily Operation: 12 hours 24 hours8 hours
Elevator will discharge into?
Continuous CentrifugalDischarge Type:
Basehead Discharge AreaHeadtop Lined?
Headtop Sides Headtop Center
How will elevator be fed? Control Fed Flood Fed
Construction:Galvanized Stainless
³̸₁₆" ¼"
Other:
Discharge Flange Height:
10GA ³̸₁₆"
See drawing below.
Boot
³̸₁₆"
14GA 12GA
Material Ga.
Head
Casing
12GA 10GA
12GA 10GA
¼"
AR 200 10GA
AR 200 ³̸₁₆"
Polyurethane/Ceramic
Liner:
Boot Hopper Lined? Yes
Abrasion Resistant Steel
Liner:
Headtop
⅜" Polyurethane
¼" Ceramic Tiles
No
Headtop Boot Hopper
¼" Polyurethane
⁵ ̸₁₆" Polyurethane ⁵ ̸₁₆" Polyurethane
AR 400 1/8"
AR 400 ³̸₁₆"
AR 400 ¼"
⅜" Polyurethane
¼" Ceramic Tiles
Boot Hopper
MAXILIFT HD-MAX
Qty/Location for Explosion Vent
Leg Casings:
Shovel Hopper Req'd?
AR 200 ¼"
AR 400 1/8"
AR 400 ³̸₁₆"
AR 400 ¼"
PLASTIC
Sweetheart SS304
Other Liner:
Head Vent Req'd?
Head Expl. Vent Req'd?
MAXILIFT HD-MAX LowPro
Sweetheart SS316
CC Bucket Types Manufacturer/Style
12 GA
TAPCO CC-HD LowPro
MAXILIFT TIGER-TUFF LowPro
Steel
Sweetheart Hot Roll
Yes No
STEEL Manufacturer/StyleGRAIN
MAXILIFT CC-MAX
MAXILIFT TIGER-TUFF
Sweetheart Hot Roll
Steel AA
Plastic
Polyethylene
Nylon
Polyurethane
TAPCO CC-HD
Ductile Iron
Sweetheart SS316
³̸₁₆"
MAXILIFT CC-MAX LowPro
4B CC-S
4B CC-S LowPro
Material Type
¼" Polyurethane
No
Sweetheart SS304
Sweetheart SS316
AR 200
AR 400
10 GA
³̸₁₆"
¼"
Manufacturer
Polyethylene
Nylon
NylonBucket Vent
Description:
VT #1
VT #3
VT #2
PlasticAA
VT #4
Steel Continuous
Gauge
INDUSTRIAL
Seals?
10 GA
12 GASweetheart Hot Roll
Sweetheart SS304
Polyurethane
Polyethylene
Polyurethane
TAPCO AA
MAXILIFT AA
4B AA
MAXILIFT Continuous
4B ContinuousPlastic Continuous
Take-up Type? Screw Gravity
Pillow Block Ball Bearing
Pillow Block Roller Bearing
Yes
Flanged Roller Bearing
Wing
No
NoYes
Yes
NoYesExplosion Casing Req'd?
Flanged Ball BearingBoot Bearing:
DrumBoot Pulley:
Lined same as hopper?
Seals?
AR 200 10GA
AR 200 ³̸₁₆"
AR 200 ¼"
FORM 508 C:\Users\emcgill\Documents\QMS MASTER WORKBOOK 01-16 2 of 3
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALES
% % % %
Relief Door Switch: Chain Slack:
Sprocket: Sprocket:
Seals: Seals:
How will conveyor be fed?Supply Reducer Oil?
Other Requirement: Other Requirement:
CONVEYOR HEAD SPECIFICATIONS CONVEYOR TAIL SPECIFICATIONS
Horizontal Length:If other, please specify:
Design HP Full Load
Startup?C/C Inlet to Discharge:
Backstop Required:
Construction: HP / Frame Size
Net Rise:
Degrees (maximum incline degree for
horizontal is 6 degrees):
Drive Location:
Drive Type:
Electric Service: Volts
CONVEYOR SPECIFICATIONS DRIVE ASSEMBLY SPECIFICATIONS
Horizontal or Incline?Motor Supplied By:
Phase Hertz
If other, please
specify:Daily Operation:
Unit of
measure
Material Characteristics (e.g., sticky, free
flowing, oily, hot, etc):
Moisture Content?If yes, what
percentage?
If yes, what
percentage?
Capacity:Unit of
measure
Unit of
measure
If yes, what
percentage?
If yes, what
percentage?
Unit of
measure
Unit of
measure
% of total
Unit of
measure
Average Lump Size
Unit of
measure
Unit of
measure
Unit of
measure
% of total % of total % of total
Material Density:Unit of
measure
Unit of
measure
Unit of
measure
Material Description:
Material Temperature (Intake):
Date: Date:
PRODUCT SPECIFICATIONS Material #1 Material #2 (if applicable) Material #3 (if applicable) Material #4 (if applicable)
City/State/Zip Code: City/State/Zip Code:
Telephone: Telephone:
E-mail: E-mail:
CUSTOMER DEALER
Name: Name:
Address: Address:
P.O. BOX 1086
SPRINGFIELD, OHIO 45501
Phone: 937-325-1511 Fax: 937-322-1963
WWW.SWEETMFG.COM
HORIZONTAL FLITE-VEYOR® FLAT BOTTOM QUOTATION REQUEST FORM #509
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALES
Type of Liner:
Bottom: Head Disch Trans Liner:
Inter Disch Trans To: Dim:
Side (if applicable): Inter Disch Liner:
Other Requirement:
Extra Inlets? Qty: Intermediate Gate Drive:
Liner Location:Inter Gate Quantity:
Head Discharge Trans To: Dim:
Supplied By? Intermediate GateType:
If Customer/Brand? Manual
10' (3mt.) By-Pass Dump Hopper?Pneumatic
Electric
Supplied By? Pneumatic
If Customer/Brand? Electric
Bearing Sensors?Head Gate Drive:
Other:
OPTIONAL ACCESSORIES OPTIONAL ACCESSORIES
Speed Sensors:Head Gate Type:
Manual
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALES
% % % %
Chain Slack:
Other Requirement: Inlet? If yes, choose an option:
CONVEYOR HEAD SPECIFICATIONS CONVEYOR TAIL SPECIFICATIONS
Address:
FLITE-VEYOR® INCLINE FLAT BOTTOM QUOTATION REQUEST FORM #515CUSTOMER DEALER
P.O. BOX 1086
SPRINGFIELD, OHIO 45501
Phone: 937-325-1511 Fax: 937-322-1963
WWW.SWEETMFG.COM
Name: Name:
Address:
City/State/Zip Code:
Average Lump Size
City/State/Zip Code:
Telephone:
PRODUCT SPECIFICATIONS Material #1 Material #2 (if applicable) Material #3 (if applicable)
Telephone:
Date: Date:
If yes, what
percentage?
% of total
Material #4 (if applicable)
Material Description:
Material Temperature:
Unit of
measure
Straight Incline
Net Rise: Degrees (max. is 6):
C/C Inlet to Discharge:
How will conveyor be fed?
Material Density:
CONVEYOR SPECIFICATIONS
Unit of
measure
Capacity:
% of total
Material Characteristics (e.g., sticky, free
flowing, oily, hot, etc):
Phase Hertz
Unit of
measure
E-mail: E-mail:
Unit of
measure
If yes, what
percentage?
Unit of
measure
If yes, what
percentage?
If yes, what
percentage?
% of total % of total
Unit of
measure
Unit of
measure
Unit of
measure
Unit of
measure
Unit of
measure
Backstop Required:
HP / Frame Size
Moisture Content:
Drive Location:
Electric Service: Volts
Curved Incline
Trough length before
Curve:
Curved Incline (see
drawing):"A"
Unit of
measure
DRIVE ASSEMBLY SPECIFICATIONS
Motor Supplied By: If other, please
specify:
Drive Type:
Unit of
measure
"B"
Supply Reducer Oil?
If other, please specify:
Design HP Full Load
Startup?
Trough length after Curve:
Construction:
Daily Operation:
Relief Door Switch:
Sprocket:
Seals:
Sprocket:
Seals:
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALES
** To clear any selection, hit the delete button on keyboard
Type of Liner:
Bottom: Head Disch Trans Liner:
Inter Disch Trans To: Dim:
Side (if applicable): Inter Disch Liner:
Other Requirement:
Extra Inlets? Qty: Intermediate Gate Drive:
Liner Location:Inter Gate Quantity:
Head Discharge Trans To: Dim:
Supplied By? Intermediate GateType:
If Customer/Brand? Manual
10' (3.1 m) By-Pass Dump Hopper?Pneumatic
Electric
OPTIONAL ACCESSORIES OPTIONAL ACCESSORIESHead Gate Type:
Supplied By?
If Customer/Brand?
Speed Sensors:Manual
Head Gate Drive:
Other:
Pneumatic
Electric
Bearing Sensors?
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALES
% % % %
Address:
FLITE-VEYOR® ROUND BOTTOM QUOTATION REQUEST FORM #514CUSTOMER DEALER
P.O. BOX 1086
SPRINGFIELD, OHIO 45501
Phone: 937-325-1511 Fax: 937-322-1963
WWW.SWEETMFG.COM
Name: Name:
Address:
City/State/Zip Code:
Average Lump Size
City/State/Zip Code:
Telephone:
PRODUCT SPECIFICATIONS Material #1 Material #2 (if applicable) Material #3 (if applicable)
Telephone:
Date: Date:
If yes, what
percentage?
% of total
Material #4 (if applicable)
Other Requirement:
Material Description:
Material Temperature (Intake):
Unit of
measureMaterial Density:
CONVEYOR SPECIFICATIONS
Unit of
measure
Capacity:
% of total
Material Characteristics (e.g., sticky, free
flowing, oily, hot, etc):
Phase Hertz
Unit of
measure
E-mail: E-mail:
Unit of
measure
If yes, what
percentage?
Unit of
measure
If yes, what
percentage?
If yes, what
percentage?
% of total % of total
Unit of
measure
Unit of
measure
Unit of
measure
Unit of
measure
Unit of
measure
Backstop Required:
Degrees (maximum incline degree for
horizontal is 6 degrees):
Horizontal or Incline?
HP / Frame Size
Construction:
Moisture Content:
Drive Location:
Electric Service: Volts
Unit of
measure
DRIVE ASSEMBLY SPECIFICATIONS
Motor Supplied By: If other, please
specify:
Net Rise:
Drive Type:
Daily Operation:
Unit of
measure
Supply Reducer Oil?
CONVEYOR TAIL SPECIFICATIONS
If other, please specify:
Design HP Full Load
Startup?How will conveyor be fed?
Length:
C/C Inlet to Discharge:
CONVEYOR HEAD SPECIFICATIONS
Other Requirement:
Sprocket:
Seals:
Chain Slack:
Sprocket:
Seals:
Relief Door Switch:
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALES
** To clear any selection, hit the delete button on keyboard
Pneumatic
Head Gate Type:
Manual
OPTIONAL ACCESSORIESOPTIONAL ACCESSORIES
Speed Sensors:
If Customer/Brand? Electric
Bearing Sensors?Head Gate Drive:
Other:
Supplied By?
10' (3.1 m) By-Pass Dump Hopper?Pneumatic
Electric
Supplied By? Intermediate GateType:
If Customer/Brand? Manual
Liner Location:Inter Gate Quantity:
Head Discharge Trans To: Dim:
Extra Inlets? Qty: Intermediate Gate Drive:
Side (if applicable): Inter Disch Liner:
Other Requirement:
Type of Liner:
Bottom: Head Disch Trans Liner:
Inter Disch Trans To: Dim:
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALES
% % % %
Supply Reducer Oil?
HP / Frame Size
Drive Location:
OPTIONAL ACCESSORIES DRIVE ASSEMBLY SPECIFICATIONS
Motor Supplied By: If other, please
specify:
Belt Misalignment?
Date: Date:
Electric Service: Volts
Drive Type:
# of FC load skirts:
If yes, specify type:
Hertz
Other Requirement:
Phase
Motion Sensors?
Covers Full or 3/4?
Safety Pull Cord? Bear Temp Monitor?
Covers? Bottom Covers?
Wind Skirt Option?
Belt Scraper Req'd?
Load Skirt Length:
Material Characteristics (e.g., sticky, free
flowing, oily, hot, etc):
Unit of
measure
Unit of
measure
Moisture Content:If yes, what
percentage?
If yes, what
percentage?
If yes, what
percentage?
Capacity:Unit of
measure
Unit of
measure
If yes, what
percentage?
% of total % of total % of total % of total
Unit of
measure
Average Lump Size:
Unit of
measure
Unit of
measure
Unit of
measure
Unit of
measure
Material Density:Unit of
measure
Unit of
measure
Unit of
measure
Material Description:
Material Temperature (Intake):
E-mail: E-mail:
PRODUCT SPECIFICATIONS Material #1 Material #2 (if applicable) Material #3 (if applicable) Material #4 (if applicable)
Address:
City/State/Zip Code: City/State/Zip Code:
Telephone: Telephone:
WWW.SWEETMFG.COM
P.O. BOX 1086
SPRINGFIELD, OHIO 45501
Phone: 937-325-1511 Fax: 937-322-1963
FCS10/DFC20 BELT CONVEYOR QUOTATION REQUEST FORM #510CUSTOMER DEALER
Name: Name:
Address:
Load Skirt:
FC Head Box
Required?
If other, please specify:
Brush Asmy Req'd?
Other Belt Cleaners:
Head Box Transition: Dimensions:
Design HP Full Load
Startup?
Head Box Liner: Backstop Required:
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALES
Horizontal or Incline?
Unit of
measure
CONVEYOR SPECIFICATIONS
** To clear any selection, hit the delete button on keyboard
Daily Operation:
Center Take-Up:
Carry Idler:
Training Idlers Required?
Impact Idlers?
Return Rolls?
How will conveyor be fed?
Diameter of Rolls:
Degrees:
Height of drop to conveyor inlet:Unit of
measure
Center of Inlet to Center of
Disch. Dim "A":
CEMA Spec:
Maximum span between
supports:
Conveyor Walkway Req'd?
Tail Standard Take-Up:
Tail Heavy Duty Take-Up:
Gravity Take-Up:
Belt Cover Thickness:
Belt Fasteners:
Belt Type:
If other, please specify:
Net Rise:
Belt Templates:
PIW of Belt:
Unit of
measure
Construction:
CONVEYOR SPECIFICATIONS
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALES
% % % %
Qty:
CONVEYOR SPECIFICATIONS
Tail Pulley Diameter:
Head Pulley Diameter:
Tail Take-Up Length:
Degrees:
Hertz
HP / Frame Size:
Drive Location:
If other, please specify:
Design HP Full Load
Startup?
Drive Type:
Backstop Required:
Supply Reducer Oil?
Other Requirement:
DRIVE ASSEMBLY SPECIFICATIONS
Motor Supplied By: If other, please
specify:
Electric Service: Volts Phase
Brush Assembly?
Scraper Assembly? Belt Side Guides?
Head Box Transition? Dimensions:
Unit of
measureCapacity:Unit of
measure
Unit of
measure
Material Characteristics (e.g., sticky, free
flowing, oily, hot, etc):
Unit of
measure
If yes, what
percentage?
% of total % of total
Moisture Content:If yes, what
percentage?
Unit of
measure
% of total% of total
Unit of
measure
Unit of
measure
Average Lump Size
Unit of
measure
Unit of
measure
Material Density:Unit of
measure
City/State/Zip Code: City/State/Zip Code:
Telephone: Telephone:
E-mail: E-mail:
QUICK-KEY® BELT CONVEYOR QUOTATION REQUEST FORM #517CUSTOMER DEALER
Name: Name:
Address: Address:
P.O. BOX 1086
SPRINGFIELD, OHIO 45501
Phone: 937-325-1511 Fax: 937-322-1963
WWW.SWEETMFG.COM
Horizontal or Incline? Daily Operation:
Center of Inlet to Center of
Disch Dim "A":
How conveyor is fed?
Construction
Net Rise:
Date:
Bottom Covers
OPTIONAL ACCESSORIES
PRODUCT SPECIFICATIONS Material #1 Material #2 (if applicable) Material #3 (if applicable) Material #4 (if applicable)
Unit of
measure
Material Description:
Material Temperature:
Unit of
measure
Galvanized
Head Box Transition
Liners?
Load Skirt Base
Extension:
Adj. Support Feet:
Date:
If yes, what
percentage?
If yes, what
percentage?
Covers
Motion Sensors? Belt Misalignment?
Safety Pull Cord? Bearing Temp Monitor?
Covers Full or 3/4?
Head Box Extension?
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALES
Belting Requirement:
** To clear any selection, hit the delete button on keyboard
Spool Idlers: Spacing:
Spool Returns? Spacing: Belt Fastner Req.:
SWEET MANUFACTURING COMPANY
QUALITY MANAGEMENT SYSTEM
SALESP.O. BOX 1086
SPRINGFIELD, OHIO 45501
Phone: 937-325-1511 Fax: 937-322-1963
WWW.SWEETMFG.COM
18"Deep 30" Deep
24"Wide 30"Wide 36"Wide
SILVER-SPAN REFERENCE DIAGRAM
must be located directly over a support structure.
extended runs involving multiple conveyors, all drive units
not supplied by Sweet Manufacturing Company. On
Date: Date:
Total Loaded Weight of Equipment: ft m Number
Number of Conveyors: Loaded Weight of Equipment: lb/ft³
Other Information: Free Span Length ft m Number
CUSTOMER DEALERName: Name:
Address: Address:
City/State/Zip Code: City/State/Zip Code:
Telephone:
Customer Signature: Dealer Signature:
SIGNATURES
Note: Attach drawing/sketch of structure.
Allowable Load: Silver-Span length be equal to or exceed the overall
conveyor length. It is the responsibility of the Customer
and Dealer to check the adequacy of support structures
kg/m³
INSTALLATION INFORMATION SILVER-SPAN REQUIREMENTS
Supporting Structure: Sweet Manufacturing Company recomends that the
Free Span Length
Size of Equipment: Length of Run: ft m
Conveyor Width (B):
Model: Model Silver-Span Depth (C):
Type of Equipment on Silver-Span:
SILVER-SPAN QUOTATION REQUEST FORM 507
CONVEYOR INFORMATION SILVER-SPAN INFORMATION
Manufacturer: Expected date of installation: Walkway(A)= 24"
Telephone:
E-mail: E-mail:
P.O. BOX 1086
SPRINGFIELD, OHIO 45501
Phone: 937-325-1511
Fax: 937-322-1963
WWW.SWEETMFG.COM
Model:
8'x8' 10'x10' 12'x12' 12'x14'
14'x14' 14'x16' 16'x16'
Yes No
sketch with spans of Silver-Span II, conveyor sizes and
expected live loads.
Note #2: Tower to elevator leg bracing should be
Other Accessory:
Other Accessory: Other Information:
every 30 feet of tower height.
Optional Accessories:
Distributor Manufacturer & Size:
Other Information:
Other Information:
Cleaner Manufacturer & Size:
Other Accessory:
Goliath I Goliath II
Size:
Special Size Tower Description:
Height*:
engineer for each specific installation.
or is enclosed or modified in any manner, please attach
Tower to Elevator Bracing Req'd
Conveyor Information:
Platform Locations:
"A" Brace Locations:
Silver-Span Information:
Dealer to have the foundation designed by a qualified
* Sweet Manufacturing Company recommends tower
elevator. It is the responsibility of the Customer and
Size: height to equal or to exceed overall height of bucket
Ladder:Yes/No
Ladder:Yes/No
Trunk Dimensions
GOLIATH TOWER INFORMATION
Discharge Ht:
Pit Depth:
Trunk Dim "F"
Trunk Dim "G"
Trunk Dim "I"
Stairs: Yes/No
Trunk Dim "F"
Trunk Dim "G"
Trunk Dim "I"
Stairs: Yes/No
Model :
Capacity:
Trunk Dim "I"
Trunk Dim "F"
Trunk Dim "G"
Elevator Leg #3
Capacity:
Discharge Ht:
Stairs: Yes/No
Ladder:Yes/No
Pit Depth:Pit Depth:
Model :
Capacity:
Discharge Ht:
Model :
BUCKET ELEVATOR INFORMATION
Manufacturer:
Elevator Leg #2
City/State/Zip Code:
Elevator Leg #1
Manufacturer:Manufacturer:
LEG FLANGE DIAGRAM
Telephone:
Name:
E-mail: E-mail:
Address:
DEALERName:
Note #1: If tower is used to support weigh bins, catwalks,
Address:
City/State/Zip Code:
GOLIATH I AND II QUOTATION REQUEST FORM 506CUSTOMER
Telephone:
P.O. BOX 1086
SPRINGFIELD, OHIO 45501
Phone: 937-325-1511
Fax: 937-322-1963
WWW.SWEETMFG.COM
GOLIATH I WITH SPLICE PLATES GOLIATH II WITH CONNECTING FEET
P.O. BOX 1086
SPRINGFIELD, OH 45501
Telephone: 937-325-1511
Fax: 937-322-1963
www.sweetmfg.com
Propane
#1 Material Temperature (Disch.)
Outside
8 Hrs. 12 Hrs 24 Hrs
#1 Average Lump Size
Yes No
#2 Material Temperature (Disch.)
#2 Average Lump Size
#3 Material Temperature (Disch.)
#3 Average Lump Size Yes No
Galv. SS304 SS316
#4 Material Temperature (Disch.)
OPTIONAL ACCESSORIES
Unit being discharged into:
Natural GasFuel Type
Installation Inside
Gas Codes Required:
Enclosure Material
Eagle I Eagle II
Eagle III Eagle IV
EPA Codes Required:
Chain Options:
Air Flow Options:
Capacity #3 Material: TPH MTPH CFH BPH
Capacity #4 Material: TPH MTPH CFH BPH
Extended Chimney
Control Box Options:
in/cm
Other Equipment Options:
Other Equipment Options:
#3 Material Characteristics(e.g.,sticky,free flowing, etc.)
#4 Material Temperature (Intake) ⁰F
Other Equipment Options:
Electrical Safety Options:
Mechanical Options:
Start Up Assistance Required
Other Application Specifications:
#3 Moisture Content before Intake %
Capacity #1 Material: TPH MTPH CFH BPH
Capacity #2 Material: TPH MTPH CFH BPH
MODEL SPECIFICATION
Cardinal I Cardinal II
Bluejay
Other Application Specifications:
Daily Operation
Destination Elevation:
Hertz
#2 Moisture Content before Intake %
Electric Service: Volts
#1 Flash Point of Product ⁰F ⁰C
#2 Material Density
#1 Desired Moisture Content after Discharge %
lb/ft³ kg/m³
Electrical Codes Required:
ft
Phase
m
#1 Material Characteristics(e.g.,sticky,free flowing, etc.)
#3 Material Temperature (Intake)
Unit fed by:
How many Different Products to be handled?
#1 Material Temperature (Intake)
City/State/Zip Code: City/State/Zip Code:
PRODUCT SPECIFICATIONS APPLICATION SPECIFICATIONS
E-mail:
CALORMATIC® HEAT PROCESSOR QUOTATION REQUEST FORM #511CUSTOMER DEALER
Name: Name:
E-mail:
Address: Address:
Telephone: Telephone:
⁰F ⁰CAmbient Temperature Range
#1 Material Density lb/ft³ kg/m³
⁰C
Name of Material #1:
⁰F ⁰C
Hawk
#1 Moisture Content before Intake %
⁰F
⁰F
lb/ft³
⁰C
⁰C
in/cm %of Total
#2 Material Temperature (Intake)
#3 Material Density
#2 Flash Point of Product
⁰C ⁰F
#2 Desired Moisture Content after Discharge %
⁰F ⁰C
#2 Material Characteristics(e.g.,sticky,free flowing, etc.)
%of Total
⁰F ⁰C
⁰F
kg/m³
⁰C
kg/m³
in/cm %of Total
#3 Flash Point of Product
#3 Desired Moisture Content after Discharge %
⁰F
⁰F ⁰C
⁰C
#4 Material Density lb/ft³
P.O. BOX 1086
SPRINGFIELD, OH 45501
Telephone: 937-325-1511
Fax: 937-322-1963
www.sweetmfg.com
#4 Average Lump Size Other Options:
Bottom Clean Out Option:
Other Options: ⁰F ⁰C#4 Flash Point of Product
#4 Material Characteristics(e.g.,sticky,free flowing, etc.) Other Options:
Other Options:
#4 Moisture Content before Intake %
#4 Desired Moisture Content after Discharge %
in/cm %of Total
Other Options: