SeisComp3 at the Seismic network of Georgia Seismic Monitoring Centre, Georgia ILIA STATE UNIVERISTY...
-
Upload
damian-reed -
Category
Documents
-
view
214 -
download
0
Transcript of SeisComp3 at the Seismic network of Georgia Seismic Monitoring Centre, Georgia ILIA STATE UNIVERISTY...
SeisComp3 at the SeisComp3 at the
Seismic network of GeorgiaSeismic network of Georgia
SeisComp3 at the SeisComp3 at the
Seismic network of GeorgiaSeismic network of Georgia
Seismic Monitoring Centre, Georgia
ILIA STATE UNIVERISTYILIA STATE UNIVERISTY
Giorgi BasilaiaGiorgi BasilaiaPotsdam 2010Potsdam 2010
Institute of Earth SciencesInstitute of Earth Sciences
SEISMIC MONITORING CENTRE
Currently there are 30 digital stations operating where 10 stations have online data transmission.Currently there are 30 digital stations operating where 10 stations have online data transmission.Tbilisi local network – 5 stations, Racha Region local network 10 stations +5 field. Enguri dam local
network 5, Javakheti region local network with 5 stations
Current Seismic NetworkCurrent Seismic Network
SEISMIC MONITORING CENTRE
SeisComp3 became the main data acquisition and exchange software from the march of 2010
Receiving online data of 10 Georgian stations and additionally 10 stations located in neighboring countries and sending broadband stations data to Orfeus data centre
SeisComp3 became the main data acquisition and exchange software from the march of 2010
Receiving online data of 10 Georgian stations and additionally 10 stations located in neighboring countries and sending broadband stations data to Orfeus data centre
SEISMIC MONITORING CENTRE
Developed data acquisition plug-ins for SeisComp3 1.Gmsys2009 (TCP, Made in Georgia)
Uses MiniSeed format for internal storage
Developed data acquisition plug-ins for SeisComp3 1.Gmsys2009 (TCP, Made in Georgia)
Uses MiniSeed format for internal storage
Internal additions to SeisComp3
SEISMIC MONITORING CENTRE
Developed data acquisition plug-ins for SeisComp3
2. Netdas digitizer (TCP, Made in USA)www.daqsystems.com
Using Grf Format
Developed data acquisition plug-ins for SeisComp3
2. Netdas digitizer (TCP, Made in USA)www.daqsystems.com
Using Grf Format
Internal additions to SeisComp3
SEISMIC MONITORING CENTRE
Earthquake alarms through SMS services and email, using the scvoice plug-in.Sending data with GSM modem that is attached to the serverusing very detailed database of Georgian Cities, villages.
Example of SMS: 1 . Automatic. 2010-08-16 21:42:47Mag=3.4M. Georgia, 36 KM from Tbilisi, City SagarejoNorth east 11km, Village Manavi
2 . Automatic. 2010-07-21 22:45:08, Mag=3.7M, Depth 1010 KM from the Georgia-Azerbaijan boarder
Earthquake alarms through SMS services and email, using the scvoice plug-in.Sending data with GSM modem that is attached to the serverusing very detailed database of Georgian Cities, villages.
Example of SMS: 1 . Automatic. 2010-08-16 21:42:47Mag=3.4M. Georgia, 36 KM from Tbilisi, City SagarejoNorth east 11km, Village Manavi
2 . Automatic. 2010-07-21 22:45:08, Mag=3.7M, Depth 1010 KM from the Georgia-Azerbaijan boarder
Internal additions to SeisComp3
SEISMIC MONITORING CENTRE
Automatic processing results are sent by SMS, EmailAnd automatically posted on our website.
www.seismo.ge
Automatic processing results are sent by SMS, EmailAnd automatically posted on our website.
www.seismo.ge
Internal additions to SeisComp3
SEISMIC MONITORING CENTRE
Structure of Seiscomp installations:Central server, SeisComp3 is doing data acquisition from all stations using different plug-ins for each kind of digitizer used, also is used for sharing data over seedlink protocol with the partner organizations + automatic processing and data forwarding to other seisComp3 installations.
Structure of Seiscomp installations:Central server, SeisComp3 is doing data acquisition from all stations using different plug-ins for each kind of digitizer used, also is used for sharing data over seedlink protocol with the partner organizations + automatic processing and data forwarding to other seisComp3 installations.
Structure of SeisComp3 at our Centre
SeismicStations
CentralServer
DataSharing
Processing
Data forwarding to Operator
Server
SEISMIC MONITORING CENTRE
Structure of Seiscomp installations:
Secondary server
is located in the room with persons on duty 24/7, it gets data from main server using seedlink is used for eye monitoring and manual processing, Used for sending of SMS messages and forwards data using seedlink to all SC3 installations on internal network (common users, large screen monitor computer).
Structure of Seiscomp installations:
Secondary server
is located in the room with persons on duty 24/7, it gets data from main server using seedlink is used for eye monitoring and manual processing, Used for sending of SMS messages and forwards data using seedlink to all SC3 installations on internal network (common users, large screen monitor computer).
Structure of SeisComp3 at SMC
Main server
Secondary Server
SMS
Manualprocessing
Data forwarding to other
instances of SC3 on network
SEISMIC MONITORING CENTRE
Synchronization of key files and other parameters between all these SC3 installations:
in the Seiscomp ConfigSeiscomp Config menu we added new options: backup and synchronize with serverbackup and synchronize with serverWhen the parameters are altered on the Central server, choosing Backup option will copy all key and configuration files to the special shared folder, while to get new configuration on any machine in network it is needed to do seiscomp config and choose sync with server, sync with server, that will copy those files from the shared folder to work with the server using Seedlink
Synchronization of key files and other parameters between all these SC3 installations:
in the Seiscomp ConfigSeiscomp Config menu we added new options: backup and synchronize with serverbackup and synchronize with serverWhen the parameters are altered on the Central server, choosing Backup option will copy all key and configuration files to the special shared folder, while to get new configuration on any machine in network it is needed to do seiscomp config and choose sync with server, sync with server, that will copy those files from the shared folder to work with the server using Seedlink
Internal additions to SeisComp3