Segregare

Introduction

PROBLEM STATEMENTDesign a manual robot which can separate different colored boxes on a moving conveyer belt.

RulesROAD TO WINThe team able to score max. no. of points by separating the blocks to their respective color zones in given amount of time would win.

RULES TO KEEP IN MIND1. In qualification round, each team would be

allotted 3 mins of time to complete the task.2. In the same round, two teams would be playing at

a time but both teams would be analyzed separately.

3. 32 teams would be selected in the first round, which would be competing against each other in the knock-out round.

4. In knock-out round two teams would compete against each other. Wining team would advance to finals and loosing team would be out of competition.

5. In finals, each team would perform individually with a time slot of 5 mins. Team which would rise and perform best would be declared the winner, others would be ranked accordingly.

6. Dc motors having rating more than 12 volts cannot be used.

7. The organizers reserve the rights to change any or all of the above rules as they deem fit. Change in rules, if any will be highlighted on the website and notified to the registered teams.

8. Violation in any of the above rules will lead to disqualification.

9. Judges' decision shall be considered final and binding on all.

SpecificationsDIMENSIONS AND FABRICATION1. The machine should fit in a box of 250mm x

250mm x 250mm (l x b x h) at every given point of the race. The external device used to control the machine is not included in the size or weight constraint.

2. The machine should not exceed 5kg of weight.

ROBOT CONTROL REQUIREMENTS1. The machine can be controlled wirelessly or with

wires. Off board power supplies are allowed.2. If the machine is wired, then the wire should

remain slack under all circumstances during the competition.

3. If the machine is controlled wirelessly, the machine must have at least a 4 frequency remote control circuit or 2 dual control circuits which may be interchanged before the start of the race to avoid frequencies interference with other teams.

TEAM SPECIFICATIONS1. A team may consist of a maximum of 4

participants, all from the same institute.2. The teams must adhere to the spirit of healthy

competition.3. Any team that is not ready at the time specified

will be disqualified automatically.4. The organizers reserve all the rights to change

any of the above rules as they deem fit. Change in rules if any will be highlighted on the website.

5. In case of any discrepancy, the decision of the judges shall be treated as final and binding on all.

ARENA SPECIFICATION1. The dimensions of conveyer belt are

(3000mm x 2000mm) i.e. (l x b).2. The speed at which conveyer belt will

rotate will be 10 meters per min.3. The dimension of collection box are

(600mm x 400mm).4. There are 5 types of cube each of

dimension (80mm x 80mm x 80mm) And of colors red, green, blue, yellow and white.

Gameplay

The game objective is to collect maximum no. of blocks in their respective colored boxes.

The blocks would be placed on the white strips (100mm) which are in between the colored strips on conveyer belt. The robot has to palace the blocks into their respective colored strips so that they fall in their respective boxes placed beneath the conveyer belt.

Points are to be awarded only when the blocks falls in boxes of matching color

Negative 1 point will be awarded each time bot touches the white block.

Number of points = 5 x (number of white strips crossed)

Negative 5 point for each time bot fall from conveyer belt.

Team collecting maximum points will win.For arena see attached file.

PRIYANSHU VERMAMobile : 09508412763Email : priyanshu@iitg.ernet.in

KAUSHAL KAMAL JAINMobile : 08486665061Email : j.kaushal@iitg.ernet.in

PARTH PARITOSHMobile : 08822625099Email : p.paritosh@iitg.ernet.in

Organizers

M.MANOJ RAHULMobile : 08876721072Email : manoj.rahul@iitg.ernet.in