Seed and Flow Monitoring at its Best - AG …...L P0258K Metri-Pack 2 Pin Spade Fuse Holder & Cover...

http://www.ag-electronics.com

http://www.agdusa.com

http://www.agexpress.com

Seed and Flow Monitoring at its Best

Providing Possibilities!

Monitoring for Drills, Air Seeders and Planters

January 2, 2020

The principals of Ag Express Electronics, Inc. of Des Moines, IA and The Daugherty Companies, Inc. of Warren, IN announced that effective January 1, 2020 Ag Express has acquired the assets of the manufacturing and distribution divisions of The Daugherty Companies. The business will continue to operate in the Warren facil-ities and current employees will be retained.

The Daugherty Companies traces its roots back more than 80 years to March of 1939 when H. L. (Hack) Daugherty founded Warren Farm Supply, a dealership of Case Farm Equipment and Studebaker Automobiles. The chronology of the business in addition to the retail dealership includes representation of agricultural equipment manufacturers throughout the Midwest and the distribution, design and manufacture of agricul-tural electronics.

The Daugherty Companies, Inc. manufactures The Vanguard System® of electronic seed and flow moni-tors, various GPS speed devices, OEM wiring harnesses for major farm equipment manufacturers and low volume–high mix electronic builds. The sale includes Alliance Group Technologies, The Vanguard System®, ag-electronics.com and agdusa.com.

Ag Express® Electronics is a 100% employee-owned, Des Moines, Iowa-based company specializing in the repair, calibration, and maintenance of electronics equipment used in the agricultural industry. Additional services include the design and production of custom wiring harnesses and after-market interfacing of com-petitive OEM implements and machinery. Founded in 1992, Ag Express serves customers primarily in North America, but also globally from facilities in Grand Island, Nebraska; Des Moines, Iowa; and Sulphur Springs, Indiana. More at www.agexpress.com.

www.ag-electronics.com www.agdusa.com www.agexpress.com

P.O. Box 346 • 534 East First Street • Warren, IN 46792Phone 260-375-2415 • Fax 260-375-3800 • [email protected]

Left to Right:Adam Douglas,Craig Murphy,David Daugherty




mailto:sales%40ag-electronics.com?subject=

ContentsPRECISION AG .........................................................................................................................3-14

Power Strips, Connectors and Cables ........................................................................................................................................................ 4-5

Precision Ag Parts and Accessories ............................................................................................................................................................. 6-8

ISO Components / PWM Drive and Accessories ........................................................................................................................................ 9

RAM Mounts ................................................................................................................................................................................................... 10-12

ISO Harnesses / Display Maintenance ......................................................................................................................................................... 13

ISOBUS Monitor System .................................................................................................................................................................................... 14

MONITORING ....................................................................................................................... 15-32Vanguard Monitor Pricing and Accessories ........................................................................................................................................ 16-19

Vanguard VM-5000 Series Monitor Comparison ..................................................................................................................................... 20

Vanguard Monitor Accessories ...................................................................................................................................................................... 21

Visu-Flo™ System Pricing and Accessories .......................................................................................................................................... 22-25

Planter Systems / Visu-Flo™ Systems / Grain Drill Systems ................................................................................................................. 26

Air Drill Systems .................................................................................................................................................................................................. 27

Grain Drill Harness and Sensor Kits .............................................................................................................................................................. 28

Replacement Seed Tubes ................................................................................................................................................................................ 29

Planter Replacement Sensors ......................................................................................................................................................................... 30

Drill and Air Seeder Sensors/Adapters ....................................................................................................................................................... 31

Seed Monitoring Test Equipment & Accessories .................................................................................................................................... 32

THE HARNESS SHOP ........................................................................................................... 33-40Tool Bar Harness ................................................................................................................................................................................................. 34

Folding and Specialty Planter ........................................................................................................................................................................ 35

Extension Cables .......................................................................................................................................................................................... 36-37

Vanguard Adapter and “Y” Cables / Mate-N-Lock Harness ........................................................................................................... 38-39

Worksheet for Custom Harness ..................................................................................................................................................................... 40

DISTANCE SENSORS, GPS SENSORS, RADAR, RADAR CABLES ........................................ 41-46“In-Cab” Radar Adapter Cables ...................................................................................................................................................................... 42

Vanguard Distance Sensors – GPS, Radar and Digital RPM ............................................................................................................ 43-44

Radar “Y” and Adapter Cables ....................................................................................................................................................................... 45

Ag-Electronics Internet Presence ................................................................................................................................................................. 46

CONNECTORS ...................................................................................................................... 47-60AMP CPC® Connectors ................................................................................................................................................................................ 48-49

AMPSeal®, Mate-N-Lock®, Jones .................................................................................................................................................................... 50

Weather Pack® ..................................................................................................................................................................................................... 51

Metri-Pack®, Cooper Bussman ................................................................................................................................................................. 52-53

Deutsch ............................................................................................................................................................................................................ 54-57

Cinch, Molex, Cannon ....................................................................................................................................................................................... 58

Miscellaneous and Parts Kits .................................................................................................................................................................... 59-60

FARM PRODUCTIVITY ......................................................................................................... 61-64Grain Moisture Testers .................................................................................................................................................................................62-63

Soil Compaction Tester .................................................................................................................................................................................... 64

Service and Repair............................................................................................................................................................................................... 64

Precision Ag

PowerProducts

ISOBUS

Conversion Kits

PrecisionFarming

Accessories

Adapter Cables

RAM Mounts

3

4 Providing Possibilities with Quality Products, Competitive Prices and Expert Support

ww

w.a

g-el

ectr

onic

s.co

m

Prec

isio

n A

g Power Options

REF PART NUMBER DESCRIPTION LIST PRICE

A A0318K AMP 3 Pin Lock Ring Connector Kit w/ Sockets – Std for Deere and CNH $ 38.00

B A0317K AMP 3 Pin Threaded Connector Kit w/ Pins – Std for Deere and CNH 30.00

C A0317FK AMP 3 Pin Power Flanged Threaded – Shell Size #17 30.00

D A0326K AMP 3 Pin Power Lock Ring Reverse – Agco – Shell Size #17 38.00

E A0325K AMP 3 Pin Power Threaded Reverse – Agco – Shell Size #17 38.00

F AD017 AMP Dust Cap – Shell Size #17 – Threaded Connectors Only 15.50

G

2319 Splitter Y Cable to divide power 94.00

2319R Splitter Y Cable to divide power (Reverse Connectors – Agco) 94.00

H

4037-218 Power Plug w/ 18” Leads – Std for Deere & CNH 44.00

4037-218R Power Plug w/ 18” Leads (Reverse for Agco) 44.00

J 4036-218 Power Plug w/ 18” Leads Threaded – Std for Deere & CNH 38.00

4036-218R Power Plug w/ 18” Leads Threaded (Reverse Con. Agco) 44.00

K 2316 3 Way Power Splitter 118.00

L 03A-03A-25 3 Pin Power Extension 25 ft. (additional lengths on page 36) 102.00

M 648852 10GA 15 ft. Battery Power Lead – 20 Amp 69.00

N 4035-218 Deere 3 Pin Power Pigtail w/ 18” lead 10.00

97110 Cigarette Plug w/ 10 ft. Cord – 5 Amp (Bare Leads) 12.80

P

97111 Cigarette Plug w/ 10 ft. Cord – 5 Amp (with A0317K Connector) 38.00

Q 2318 Power Strip including 2 Cigarette Lighter Outlets and 3 Amp CPC Outlets 160.00

A DB C

GE F H

Q

J K L M

N P


51-260-375-2415 www.ag-electronics.com

Precision Ag

ww

w.ag-electronics.com

Prices effective 2-1-2020. Subject to change without notice.

HD Power OptionsA DB C

E HF G

KJ L M

REF PART NUMBER DESCRIPTION LIST PRICE

A SS2451 15’ HD Tractor Power Harness $188.00

B

SS2415 15’ HD Power Extension 160.00

SS2430 30’ HD Power Extension 275.00

C SS2450 HD Power Relay Module CALL

D SS2453 3 Motor Relay Harness 184.00

E

SS2410 2 Position Switch Box 129.00


F 8042 4GA SGX 2-Cond Battery Cord $2.40/ft.

G 3214 14GA PVC Jacketed 2-Cond Cord $1.10/ft.

H AP012K HD Power Connector Kit-Dual Gender 8.00

J

HP401 4-Pole Power Socket (shown) 42.00

HP402 4-Pole Power Plug 20.00

K P0254K 6GA Molded 50A Fuse Kit w/ Splices 24.00

L P0258K Metri-Pack 2 Pin Spade Fuse Holder & Cover w/ Contacts 7.50

M P0450K Metri-Pack 4 Pin Relay Connector 24.00

Power ModuleReasonably priced replacement unit for worn out Computer Trak® 100, 200 and 300 power modules. Unlike most replacements, this power module comes with a 12’ cord for flexible mounting options.

Old CT Monitor Power Module CTRM

Price WAS $475.00

OLD NEW

New CT Monitor Power Module CTRMPrice NOW $295.00



ww

w.a

g-el

ectr

onic

s.co

m

Prec

isio

n A

g

REF. PART NO. DESCRIPTION LIST PRICE

A 1493-0050 Ez Lightbar to Raven Monitor $ 38.00

B 1495-0050 Ez Lightbar to Dj Monitor 38.00

C 4001225-1A Ez Guide Cable Splitter 60.00

D 4001225-1AD Ez Guide to DJ Monitor 45.00

E 4001225-1AR Ez Guide to Raven Monitor 45.00

F 800403 Ez 250 Remote Logging 49.00

G 65535A Ez 250 Radar Cable 32.00

H 65536A Ez 250 Ez Steer Harness 32.00

J 63076A Ez 250 NMEA Output Cable 32.00

K 65168A Ez 250 Power w/ Lighter Plug 50.00

L 4000336 Ez 500 Remote Logging Harness 49.00

M 800404 Ez 500 Remote Logging with Relay 49.00

N FP800401 AutoPilot Foot Pedal 115.00

O FP800402 Ez Steer Foot Pedal 115.00

P FP800403 Ez Pilot Foot Pedal 115.00

Q 63076B CFX 750/FmX NMEA Output Cable 38.00

R 77533A Dual Relay Power Cut-Off 160.00

S 67259A FmX/CFX750 to Ez Steer Power Cable 125.00

T 75742A FmX/CFX750 to Ez Steer Cable 100.00

Precision Ag Parts and AccessoriesIntegration of various components of a Precision Ag System often require specialty harnesses as well as other components in order to complete the package. Think of Ag Express Electronics first when your application requires something “out of the ordinary”. Products such as our foot pedal switch that is hinged in the rear for a more natural foot pivot to help alleviate operator fatigue and our various speed output cables are just a few of the special options that we offer. Browse the following pages for ideas that can help you!

A B C D

E F G H

J K L M

N O P Q

R

S

T



Precision Ag

ww




A D12-D12-1.5 FmX/CFX750 can Port Ext $ 41.00

B D4-D4-1.5MXP FmX/CFX750 Power Ext. Cable 15.00

C FMX12P FmX/CFX750 Dust Plug 10.50

D 68461A FmX/CFX750 Radar Output and Coverage Switch Cable 95.00

E 1495-0050D12 FmX/CFX750 Radar out DJ Monitor 68.00

F 67080A Power Adapter CFX to FmX Harness 35.00

G 67070A Power Adapter FmX to CFX Harness 35.00

H 66694A FMX Power Adapter 52.25

J 75528-XXA Field IQ Trimble CAN/PWR Extension CALL

K 67095A Nav Controller Power Adapter 38.00

L 77413A CAN Quick Disconnect Tractor Side 240.00

M 77611-01A CAN Quick Disconnect Implement Side 165.00

N 68463A Ag Leader Yield Monitor to Trimble 162 95.00

O GA16923A Kinze Smart Sensor Adapter 16.50

P ISO-2Y ISO 9-Pin Y Cable 495.00

Q 9C-9C-XX 9 Pin CAN/ISO (see page 37 for options/pricing) CALL

Precision Ag Parts and AccessoriesA B C D

E F G H

J K L M

N O P Q



ww

w.a

g-el

ectr

onic

s.co

m

Prec

isio

n A

g


A 46372-0150S1 Lift Switch $185.00

B 46372-00AL Ag Leader Lift Switch Adapter 5.00

C 46372-00T Trimble Lift Switch Adapter 5.00

D 46550-0220S1 Fan or Shaft RPM Sensor 2 Wire 95.00

E 46697-0014S1 Hall Effect RPM Sensor 3 Wire 125.00

F 46682-0720S3 Hopper Level Sensor 116.00

G 72122 Antenna Cable, Magnetic Base 260.00

H 77282A CFX Power Adapter 65.00

J 67258A Power Lead FmX/CFX 75.00

K 75741A FmX – Nav II Port Replicator 105.00

2000830-6A 6 ft. GPS Antenna Cable 57.00

L




M 22882-10S 900 MHz RTK Radio Whip 185.00

N

50166A Trimble 252/262 Data Power Cable 110.00

50166-1A Trimble 252/262 Data Only Cable (shown) 38.00

P 97132 Ag Leader Strcmd to 20/20 NEMA Adapter 49.00

97160 StarFire® to Dj Radar Port Adapter 115.00

Q 97161 StarFire® to Raven Radar Adapter 115.00

97162 StarFire® to Radar Sig / Ground Output 100.00

Precision Ag Parts and AccessoriesA B C D

F G H

J K L

P

Q

M

E

N


Precision Ag

ww



PWM Drive and Accessories46709-2200S1 PWM Drive $1941.00 The HD4180 is a combination hydraulic motor and PWM valve. The 4180 is suited well for aftermarket installations.

46709-2219 Mounting Bracket $169.00 Universal mounting bracket for HD4180 PWM Drive.

46709-2219S1 Mounting Kit $449.00 Bracket and hardware for HD4180 PWM Drive.

46436-0178S1 Application Rate Sensor $260.00 Measures shaft rotation at 360 pulses per revolution.

11004-0179 AP Rate Sensor Adapter $55.50 Adapter for 1” shaft.

11004-0305 AP Rate Sensor Adapter $101.50 Adapter for 1¼“ shaft.

ISO Components


A 97120 ISO Breakaway Connector $199.90

B 97122 Round 4-Pin Power Kit to Breakaway 35.00

C D0416K Square 4-Pin CAN Kit to Breakaway 9.00

D 97121 ISO Implement Connector Kit w/ Cap 72.00

E D0992K 9-Pin Plug 30.00

F D0991K 9-Pin Diagnostic Receptacle Kit 30.00

G 97123 Terminator 44.00

H P0618K 6-Pin Terminator Connector Kit 7.00

X4418 Twisted Pair 4-Cond CAN Wire $1.35/ft.

Custom ISO and CAN harnesses made upon request.

A DCB

GFE H

10

ww

w.a

g-el

ectr

onic

s.co

m

Prec

isio

n A

g

Providing Possibilities with Quality Products, Competitive Prices and Expert Support

RAM MountsRAM Mounts are the answer to mounting problems in Agricultural vehicles… be it tractors, combines, sprayers or even a laptop in your pickup truck. There are hundreds of RAM Mount components, below are the most popular Ag applications but are not limited to just these. Call us for solutions that will best fit your needs.

A


A R2020 No Drill Laptop/Tablet Vehicle Mounts CALL B RAM-234-3 Tough Tray for Laptop Holder $59.49 C RAM-234-6 Tough Tray II for Netbook/Tablet Holder 37.99

D RAM-HOL-UN7BU Universal Small Phone Cradle (includes 1” Ball) 26.99

RAM-HOL-UN10BU Universal Large Phone Cradle (includes 1” Ball) 30.49 E RAM-HOL-UN8BU X-Grip Universal 7”–8” Tablet Holder (includes 1” Ball) 38.49 F RAM-HOL-UN9U X-Grip Universal 9”–10” Tablet Holder (requires “E” from pg. 12) 73.49 G RAM-HOL-UN11U X-Grip Universal 12” Tablet Holder (requires “E” from pg. 12) 75.99 H RAM-HOL-TABL-LGU Tab-Lock™ Locking Cradle for 10” Tablet (requires “E” from pg. 12) 73.49 I RAM-HOL-TAB8U 10” Tab-Tite™ Cradle (requires “E” from pg. 12) 26.49 J RAP-UN-CAP-4U X-Grip Replacement Caps – 4 pack 5.99 K RAP-105-6D224U Suction Cup with 6” Flex Arm (Fits E,F,G,H,J above) 18.99 L RAM-B-224-1U Single Suction Cup with 1” Ball 17.49 M RAP-333-224-1U Double Suction Cup (requires “E” from pg. 12) 43.97 N RAP-365-224-1U Triple Suction Cup with 11/2” Ball 49.49 O RAP-279C Dashboard Friction Base (use with Single Suction Cup) 18.49

DCB

H-IE-F-G J K

OL M N


Precision Ag

ww



RAM Mounts


A RAM-TRACK-EXA-13U 13” Modular Aluminum Tough-Track $18.49

B RAP-B-354U-TRA1 1” Track Ball with T Bolt 9.99

RAP-354U-TRA1 11/2” Track Ball with T Bolt 13.49 RAP-B-400U 1” Ball Tough-Claw™ - .625” to 1.5” clamping range 30.49

C RAP-B-404U 1” Ball Tough-Claw™ - 1” to 1.875” clamping range 35.49

RAP-400U 11/2” Ball Tough-Claw™ - .625” to 1.5” clamping range 33.99

RAP-404U 11/2” Ball Tough-Claw™ - 1” to 1.875” clamping range 39.49

D RAM-B-231ZU 1/2” to 1” Rail Base with Single U-Bolt & 1” Ball 14.99 RAM-231U 1/2” to 1” Rail Base with Single U-Bolt & 11/2” Ball 17.49

E RAM-235U 1” to 1¼” Rail Base with Double U-Bolt & 11/2” Ball 23.49

RAM-D-235U 1” to 1¼” Rail Base with Double U-Bolt & 2¼” Ball 36.49

F RAP-B-299-4U Cup Holder Base with 1” Ball 25.99

G RAM-B-132BU 16 oz. Drink Holder with 1” Ball 19.49

RAP-B-417BU 32 oz. XL Drink Holder with 1” Ball 37.49 H RAM-B-132RU 16 oz. Drink Holder with Small Claw 38.99

I RAP-393-G1U Dark Green Sun Visor 8” × 13” – 50% Tint – 1” Ball 37.49 RAM-B-201U-A 13/4” Arm for 1” Ball 12.99

J RAM-B-201U 3” Arm for 1” Ball 13.49

RAM-B-201U-C 6” Arm for 1” Ball 18.99

RAM-201U-B 31/2” Arm for 11/2” Ball 19.49

J RAM-201U 6” Arm for 11/2” Ball 21.99

RAM-201U-D 9” Arm for 11/2” Ball 39.49

RAM-D-201U-C 3” Arm for 2¼” Ball 43.99

J RAM-D-201U 6” Arm for 2¼” Ball 62.49

RAM-D-201U-E 12” Arm for 2¼” Ball 75.49

K RAP-BC-201U Adapter Arm between 1” and 11/2” Balls 21.99

J K

A B C D E

F G H I

12

ww

w.a

g-el

ectr

onic

s.co

m

Prec

isio

n A

g


RAM Mounts

N

O

B

K

H I

DA C

GF

J


RAM-B-202U 1” Ball on 21/2” Base $ 7.99

A RAM-202U 11/2” Ball on 21/2” Base 13.49

RAM-D-254U 2¼” Ball on 21/2” Base 21.49

RAM-202AU ¼”-20 threaded 11/2” Ball on 21/2” Base with Stud 17.49

B RAM-202U-MT1 5/16”-18 threaded 11/2” Ball on 21/2” Base 15.49

RAM-202CNSU 3/8”-16 threaded 11/2” Ball on 21/2” Base 15.49

RAM-B-238U 1” Ball Diamond Base 6.99

C RAM-238U 11/2” Ball Diamond Base Common uses: Trimble Displays 250/500/750 11.99

RAM-B-237U 1” Ball with ¼”-20 Male Threaded Post 8.49

D RAM-239U 11/2” Ball with 5/16”-18 Male Threaded Post 13.49

RAM-236U 11/2” Ball with 3/8”-16 Male Threaded Post 9.99

E RAM-111BU 11/2” Ball on a 6¼” x 2” Plate 15.49

F RAM-270U 11/2” Ball Mount for GreenStar Displays 28.99

G

RAM-2461U 11/2” Ball on 35/8” (3.625”) Square Base Common Mount Ag-Leader™ 16.99

RAM-D-2461U 2¼” Ball on 35/8” (3.625”) Square Base Common Mount Ag-Leader™ 25.99

H

RAM-B-273U Add an extra 1” Ball to a 1” Ball Arm 8.99

RAM-273U Add an extra 11/2” Ball to a 11/2” Ball Arm 15.99

I RAP-339U Rare Earth Magnetic Base to add to item (A) above 16.99

J RAM-B-230U 1” Double Ball Adapter 14.49

RAM-230U 11/2” Double Ball Adapter 18.99

K 647141 11/2” Ball Vanguard Monitor Mount Kit with 6” × 2” Plate 37.48

L 647142 11/2” Vanguard Monitor Mount Kit with U-Bolt Base 39.48

M 647143 11/2” Vanguard Monitor Mount Kit with 21/2” Round Base 35.48

N R2031 11/2” Universal Display Mount 50.97

O R2032 11/2” Ag Leader Integra / InSight / Edge / Versa Mount 54.47

P R2042 Bench Top Display Base with 11/2” Ball 41.98

L M

P

E


Precision Ag

ww



Universal Mapping HarnessesUse your ISO virtual terminal as a mapping device from any vehicle

PART NO. DESCRIPTION LIST PRICE

6986868 12v 6 Amp Power Supply $ 75.00

6986869 12v 10 Amp Power Supply 99.00


66695A Trimble® CFX-750 / FmX Power Supply Cable 66.00

725810P 20/20 SeedSense® Power Supply Cable 66.00

66670P Ag Leader® Display Power Supply Cable 66.00

97174 AFS® Pro 600/700 Power Supply Cable 66.00

97174SC AFS® Pro 600/700 Cable (CNH Service Tool Capable) 200.00

97157 GreenStar® 2/3 Power Supply Cable w/ Switch 66.00

add –W 120V AC to 12V DC Wall Power Supply 59.00

Display MaintenancePower your displays at your desk


97170 AFS® Pro 600/700 and IntelliView™ Mapping Harness $230.00

97155 GreenStar® 2/3 Mapping Harness 230.00

97135 Trimble® FMX Mapping Harness 230.00

97136 Trimble® CFX Mapping Harness 230.00

Note: Not wired for 3rd party receivers, but adapters available upon request.

Universal ISO Cab HarnessesUtilize your current virtual terminal in any make of tractor


97172 AFS® Pro 600/700 and IntelliView™ 2WD $ 615.00

97172-4 AFS® Pro 600/700 and IntelliView™ 4WD 690.00

97156 GreenStar® 2/3 2WD 490.00

97156-4 GreenStar® 2/3 4WD 550.00

97156-4H GreenStar® 2/3 4WD High Current 1260.00

97158 Expansion Cable for StarFire® Receiver 190.00

Note: Not wired for 3rd party receivers, but adapters available upon request.


ww

w.a

g-el

ectr

onic

s.co

m

Prec

isio

n A

g ISOBUS Monitor SystemPlanters – Drills – Air SeedersDICKEY-john (PDC) Planter/Drill System provides monitoring of seed population and spacing. Compatible with ISO-compliant virtual terminal already in your tractor.

PART NUMBER DESCRIPTION * LIST PRICE

ISO-6 ISO 16-Row Planter/Drill Kit $1995.00 Includes (1) each: 16-Row Master Module, Module “T” Harness, 6’ CAN Hitch Harness, Terminator, Module Mounting Bracket, Lift Switch (whisker)

ISO-6EX ISO 18-Row Expansion Kit $600.00 Includes (1) each: 18-Row Member Module, Module “T” Harness

*Planter Harness and Sensors not included

OLDto

NEW

The Vanguard System –Monitoring

Systems for…

Planters

Grain Drills

Air Seeders

Liquid Flow

Replacement Seed Tubes

Replacement Seed Sensors

Parts & Accessories

15Monitoring for Drills, Planters and Air Seeders


ww

w.a

g-el

ectr

onic

s.co

m

Mon

itorin

g

Vanguard VM-5000 Series Monitors for Seed and LiquidThe latest in color touchscreen technology with the features at a price you can affordVanguard brings technology to a new level across the full range of our products. Starting with the economical plug and play VM-5100 for basic seed flow monitoring throughout the line to the VM-WiFi Tablet that works with up to 192 sensors monitoring seed and/or liquid fertilizer, Vanguard offers more features and better value. All models feature a full color touchscreen for ease of operation and our setup assist wizard, making multiple setups quick and easy.

Vanguard VM-5100 Seed MonitorOur basic 1-16 row monitor for seed flow only. The VM-5100 has a new look but retains the same great features found in previous models. It comes standard with our exclusive EZ-Convert™ implement harness that connects to either Deere or Dj style planter harnesses. “No Adapters Needed!” If your requirements are for a seed flow monitor only then the VM-5100 is for you. A no-frills monitor that provides peace of mind planting…plug it in and go! No programming required.

646115 VM-5100 Vanguard Monitor $789.00

Vanguard VM-5200 Seed and Flow MonitorThe VM-5200 is our enhanced version with more features than found on the VM-5100. It is capable of using our Visu-Flo™ System to monitor liquid in addition to seeds. Operator can view seeds/second or GPM as a planter average or by rows. Min-Max-Avg and 20 second row history are features not found on comparable monitors.

Use the drop down Insta-Pop™ feature to get an approximation of population or GPA. The VM-5200 offers features at a great price!

646120 VM-5200 Vanguard Monitor – 1-16 Row Version $929.00 646125 VM-5200 Vanguard Monitor – 1-36 Row Version $1039.00

VM-5200

VM-5100


Monitoring

ww



Vanguard VM-5500 / VM-5600Population Monitors for Seed and LiquidDesigned by farmers for farmers and packed with the features you need for today’s agriculture.

7” Color Touchscreen RAM 11/2” Ball Mount Row Sensor Monitoring Supports RPM, VAC and Bar Graphs plus Dashboard View Hopper Level Sensors Supports Visu-Flo™ Technology English/Metric option Optional built-in GPS for speed Shows acres and acres/hour Adjustable Accumulating Time Low Rate Seeding

Vanguard VM-5500 Population Seed & Flow Monitor 1-16 RowsJust because you asked for it! A 1-16 row version of our popular full population monitor. All the features of the 1-32 row VM-5600 monitor. Monitor your seed and flow at the same time on the same screen! No more floating balls to watch plus you know the applied rate as well. This console will monitor up to 16 seed sensors or 16 flow meters or cover up to an 8 row planter with both.

646140 VM-5500 Vanguard Monitor $1224.00 646142 VM-5500 Vanguard Monitor w/ GPS Enabled 1499.00

Vanguard VM-5600 Population Seed and Flow Monitor 1-32 RowsPlant with confidence by knowing how well your equipment is per-forming. View singulation by rows and monitor your liquid application rate all from a choice of a bargraph screen or dashboard. Choose the Trimble GPS Enabled version and never need to hook up a radar or external speed sensor again! When using our Visu-Flo sensors, you can monitor both seed and flow on up to a 16 row planter. The VM-5600 series is our most popular monitor.

646145 VM-5600 Vanguard Monitor $1499.00 646147 VM-5600 Vanguard Monitor w/ GPS Enabled 1724.00

VM-5500

VM-5600

Vanguard VM-5800 Population Monitors for Seed and LiquidA modular system supporting up to 192 sensors...Talk about horsepower, the VM-5800 has it! All the features of the Vanguard Population Monitors on steroids. Couple seed sensors with our Visu-Flo™ sensors to design your own system. Monitor liquids side by side, in furrow or however you want up to one seed sensor per row and up to three flowmeters per row. Then sit back and watch the performance of you system from the cab of your tractor knowing that you are planting and applying at the rates you are expecting. Setup your side dressing equipment with Visu-Flo™ and apply with confidence.

Vanguard VM-5800 Population Seed and Flow MonitorThe VM-5800 system combines the 7” color touch screen monitor with a CAN Bus network of modules on the implement for maximum flexi bility. The basic starter system includes the console, two 5800-32 modules each capable of up to 32 inputs, all harness and installation instructions. To expand the system we offer an expansion kit that includes a module and harness. The system does not include any sen-sor harness. Our standard row harnesses as well as OEM harnesses plug into the 5800 system.

The VM-5800 is a natural for Air Drills and Air Seeders. Design your

system using the VM-5800 and modules. We can supply custom har-nessing to fit your rig. Put our experience in ag electronics to work for you and enjoy the peace of mind knowing your systems are performing as you expect!

646161 VM-5800 Vanguard 2 module system (for up to 64 sensors) Kit includes monitor, two 32 row modules and all harnessing $3459.00646056 Module expansion kit (adds 32 sensors) 979.00


ww

w.a

g-el

ectr

onic

s.co

m

Mon

itorin

g

VM-5800

5800-32


Monitoring

ww



Vanguard VM-WiFi Tablet SystemJust Out and All New!

Just out and all new is the Vanguard VM-WiFi Tablet Monitoring system. Based upon the popular Vanguard 5000 Series Monitors, the VM-WiFi incorporates a wireless module on the implement to transmit CAN signals to a 10.1” Android TAB-A mounted in the cab.

Take advantage of the flexibility of a tablet that can go with you to record information, connect to the internet or be used with other apps on the farm…and eliminate the need for a dedicated monitor in the cab!

With 192 sensor capability in seed, flow or a mix of the two, the VM-WiFi provides the operator with a bar-graph to quickly view individual sensor performance. Switch screens to look at more detailed averages, coverage rates and much more. Work with confidence, knowing your seeding and liquid application rates on a large modern screen.

Vanguard Monitoring comes from a long heritage in agricultural electronics to assure you of a quality product and a name you can trust.

646171 VM-WiFi Vanguard Module System – 1-32 Row $1749.00 (Samsung TAB-A not included)

646056 Module Expansion Kit (add 32 additional sensors) 979.00


ww

w.a

g-el

ectr

onic

s.co

m

Mon

itorin

g

Vanguard VM-5000 Series Monitor Comparison

VM-5100 VM-5200 VM-5500 VM-5600 VM-5800All the Vanguard VM-5000 Series monitors are Made in the USA, come standard with a

7” color touch screen and with a 11/2” RAM Ball on the back for easy mounting solutions.

Row 16 Rows & 1-16 Rows 1-16 Rows 1-32 Rows 1-192 Rows Monitoring 36 Rows

Auto Detects Setup Auto Setup Setup Assist Setup Assist Setup Assist Rows

Seed Monitoring Seed Flow Insta-Pop Full Population Full Population Full Population Capabilities

Liquid Visu-Flo Visu-Flo Visu-Flo Insta-Flo Monitoring GPA GPA GPA

Speed Input ✔ ✔ ✔

Acreage ✔ ✔ ✔ Counter/Hour

EZ-Convert Adapts to Deere or DICKEY-john Harness

AVAILABLE OPTIONS

GPS Speed ✔ ✔ ✔ Option

Lift Switch ✔ ✔ ✔ Capable

Hopper Level 2 Hopper Level 2 Hopper Level 2 Hopper Level Sensors

RPM Sensors 2 RPM Sensors 2 RPM Sensors

VAC Sensors 2 VAC Sensors 2 VAC Sensors

VM-5800VM-5500VM-5100


Monitoring

ww



Accessories Optional RAM accessories are available for custom installation such as an arm and base kit. Vanguard monitors come with 11/2” RAM ball mount. Arm socket and base not included. Choose this kit or a suitable RAM Mount from page 12 for your application.

Vanguard Monitor Accessories


647101 Battery Harness w/ 3-Pin AMP (12’) $75.00

647109 Battery Harness Long (17’) 65.00

647105 Visual Alarm Kit 39.95

647110 Visual Alarm Extension 6’ 14.00

647141 RAM Mount Kit with 6×2 Flat Base 37.48

647142 RAM Mount Kit with U-Bolt Base 39.48

647143 RAM Mount Kit with Round Base 35.48

647122-17 Accessory Harness VM-5600 149.00

647121 12’ Accessory Harness Extension 48.00

647125 24’ Accessory Harness Extension 92.00

647320 GPS Patch Antenna, VM-5500/5600 42.00

62034A Antenna Mounting Plate 15.00

648110 Velo L/S GPS Speed Sensor 359.00

46372-0150S1 Dickey-john Lift Switch w/ Chain 185.00

46372-00D Dickey-john Lift Switch 2WP Adapter 5.00

46372-WLS Whisker Lift Switch w/ Magnet 95.00

46372-MLS Mercury Lift Switch w/ Magnet 95.00

46682-0720S3 Hopper Level Sensor Max 2 116.00

46682-0920S1 Air Pressure Sensor 197.00

46697-0014S1 Hall Effect RPM Sensor 3 Wire 125.00

1690-0005A Sprocket Sensor Kit w/ Cable 157.00

648855-xx VM-5800 CAN Hitch Extension CALL

648845-xx VM-5800 Module to Module Extension CALL

647141 647142 647143


ww

w.a

g-el

ectr

onic

s.co

m

Mon

itorin

g

Vanguard Visu-Flo™ SystemReplace those floating balls with the graphic color touchscreen monitor that does it all and much more! Designed by farmers for farmers, the Vanguard Visu-Flo™ incorporates flow meters on each row to sense application rate.Visu-Flo™ is available on the Vanguard VM-5000 Series of Monitors. Choose from three different flow meters to match your application rate. Use the monitor as a seed monitor and to monitor flow at the same time, or use it as a flow monitor only if you already have seed monitoring. Harnessing is simple and easy to install. A bracket specially designed for the flow meters holds 8 meters in a cluster. Gang brackets together for additional meters.

Home screen of 12 row seed/flow setup. Row 1 failed (VM-5600 shown).

Dash board view of 16 row liquid flow with two rates and two products

(VM-5600 shown).

Home screen of 16 row liquid flow with two rates (VM-5600 shown).

For additional information or to place an order, contact our customer service department at 1-260-375-2415.

Now withVisu-Flo™ Technology

Using the brackets to gang flow meters together makes installation quick and easy.

Flow Meters (JG is John Guest Fitting) PART # DESCRIPTION PRICE

6663JG Flow Meter .013 – .132 GPM $119.00

6664JG Flow Meter .032 – .396 GPM 119.00

6665JG Flow Meter .079 – 2.642 GPM 119.00

6667JG Flow Meter 0.53 – 1.189 GPM 119.00

6668JG Flow Meter 1.32 – 3.96 GPM 119.00

Visu-Flo™ Harness (3’ Sensor Leads) PART # DESCRIPTION PRICE

3706A 6 Sensor Harness w/ 19’ Hitch Cable $185.00

3708A 8 Sensor Harness w/ 19’ Hitch Cable 215.00




Hitch extensions are available; see page 36 for lengths and prices.

Y CablesConnect Visu-Flo™ harness to an existing seed harness PART # DESCRIPTION PRICE

237-8Y Visu-Flo™ Harness to Dj Seed Harness $192.00

237-12Y Visu-Flo™ Harness to Dj Seed Harness 220.00

237-16Y Visu-Flo™ Harness to Dj Seed Harness 257.00

237-8VJ Visu-Flo™ Harness to Deere Seed Harness 192.00




Monitoring

ww



Visu-Flo™ Parts

❝Now you can know you’re sending the right amount of fertilizer to each row. You’ve seen similar monitors for seed; now this Vanguard unit is available for row fertilizer.❞

Tom J. Bechman, March 6, 2017The 5 Most Exciting Innovations from

the National Farm Machinery Show

www.IndianaPrairieFarmer.com

❝The Vanguard monitoring system gives us an enlightened view into the real-time performance of the machinery we are operating. From accurate population and singulation numbers on seed to flow-by-row with the Visu-Flo™ liquid monitoring system. The all-inclusive design puts each critical piece of information in an intuitive layout that is easy to understand and act upon.❞

Greg SpoonerSpecialty Sales Co.

Sumner, GA

http://www.IndianaPrairieFarmer.com


ww

w.a

g-el

ectr

onic

s.co

m

Mon

itorin

g

Visu-Flo™ Parts and Accessories

Orifice Tubing (1/4“ O.D.) PART # DESCRIPTION PRICE / FT.

A45300 Grey 1.3mm – .051 GPM $1.89

A45329 Green 1.5mm – .059 GPM 1.89

A45298 Yellow 1.9mm – .112 GPM 1.89

A45299 Red 2.3mm – .218 GPM 1.89

A96107 Blue 3.1mm – .392 GPM 1.89

NOTE: Photo of tubing not to scale. Flow rates shown are based on 10 foot length at 25 psi.

Accessories PART # DESCRIPTION PRICE

JGT320 1/4” O.D. x 100ft. Tubing $ 25.00

JGT321 3/8” O.D. x 100ft. Tubing 45.00

6698-4 4 Row Manifold 85.00

6698-8 8 Row Manifold 140.00

6675 Bracket for 8 Flow Meters 100.00

46372-WLS Whisker Lift Switch w/ Magnet 95.00

46372-MLS Mercury Lift Switch w/ Magnet 95.00

SS126ST 3/4” FTP 50 Mesh Screen 59.00

VGT-8PU 4-8 Row Pop-Up Fert Kit 949.00

VGT-16PU 12-16 Row Pop-Up Fert Kit 1149.00




SS2453-1 20A 1 Switch Relay Harness 36.00

23120A34PP Pressure Manual Reg. Valve 37.00

2140GXB100 2.5” Glycerine Pressure Gauge 22.00

AA144A1 Directional Valve (2-Way) 108.00

JG985X ¼”, 5/16”, 3/8” Diaphragm Check Body w/ Cap” 21.00

JGVR5X ¼”, 5/16”, 3/8” Variable Rate Check Body w/ Cap 51.00

❝I finally can see what both my liquids are actually doing. No more looking over my shoulder in a cloud of dust at midnight. I love having all the information at my finger tips. Adding in the new orifice tubing saved me from the old always clogging orifice disc which saved me valuable time this season. Balancing the system has never been easier. I have shown it off to several neighbors and will continue to do so.❞

Nathan WoodsFamily Farmer – Pendleton, IN

Orifice Tubing - Eliminate troublesome orifices with a length of this tubing. Cut to length to equalize flow to all rows.


Monitoring

ww



Visu-Flo™ Parts and Accessories REF. PART NO. DESCRIPTION LIST PRICE

JG6000 3/8” JGF to 3/8” MPT Adapter $3.09

JG6006 1/4” JGF to 3/8” MPT Adapter 2.47

A



JG6038 3/8” JGF to 3/8” JGF Union 3.29

B JG6035 5/16” JGF to 5/16” JGF Union 2.60

JG6014 1/4” JGF to 1/4” JGF Union 2.44

JG6011 3/8” JGF to 5/16” JGF Reducing Union 3.37

C JG6010 3/8” JGF to 1/4” JGF Reducing Union 3.31

JG6012 5/16” JGF to 1/4” JGF Reducing Union 2.69

JG6039 3/8” JGF to 3/8” JGF Elbow Union 4.16

D JG6040 5/16” JGF to 5/16” JGF Elbow Union 3.21

JG6041 1/4” JGF to 1/4” JGF Elbow Union 2.78

JG6015 3/8” JGF to 5/16” JGF Elbow Reducing Union 4.62

E

JG6017 3/8” JGF to 1/4” JGF Elbow Reducing Union 4.62

JG6005 3/8” JGF to 3/8” JGF Plug in Elbow 4.26

F JG6018 5/16” JGF to 3/8” JGF Plug in Elbow 3.35

JG6019 1/4” JGF to 3/8” JGF Plug in Elbow 3.35

JG6058 3/8” JGM to 1/2” HB Adapter 3.29


G



JG6009 3/8” JGM to 5/16” JGF Reducer 2.78

H

JG6001 3/8” JGM to 1/4” JGF Reducer 2.69

JG6002 3/8” JGF Union Tee 4.38

I JG6022 5/16” JGF Union Tee 3.64

JG6021 1/4” JGF Union Tee 3.54

JG6024 3/8” JGF Union Ball Valve 7.80

J JG6025 1/4” JGF Union Ball Valve 7.37

A

B

C

D

E

F

JIHG


ww

w.a

g-el

ectr

onic

s.co

m

Mon

itorin

g

Vanguard was the pioneer in grain drill monitoring over 25 years ago. We offer more selections and greater flexibility than any other brand. Systems are offered with all population sensors, mixed popu-lation and blockage sensors or with blockage sensors only. Prices include monitor, implement harness and sensors. For harness and sensor kits only see page 28.

Choose a liquid fertilizer monitoring option. See flow in Gallons Per Acre with one of our population monitors or Gallons Per Minute with our economically priced VM-5200 monitor.

Price includes monitor, harness and flow sensors mounted in centralized location.

Grain Drill Systems

Visu-Flo™ Systems

Planter SystemsSystems for all popular plantersWe specialize in custom built planters and hard to fit machines. Call 1-260-375-2415 for applications not listed below.

Typical planter systems. We fit most standard configurations as well as build custom harness for modified planters. Systems include monitor, planter harness and seed sensors.

DESCRIPTION POPULATION LIST PRICE NON-POPULATION LIST PRICE

4 Row Planter VM-5540-4 $1716.00 VM-5140-4 $1264.00

6 Row Planter VM-5540-6 1956.00 VM-5140-6 1446.00

8 Row Planter VM-5540-8 2200.00 VM-5140-8 1646.00

12 Row Planter VM-5640-12 3130.00 VM-5140-12 2206.00

16 Row Planter VM-5640-16 3658.00 VM-5140-16 2640.00

24 Row 30" Fold VM-5600-2430 6034.00 — —

32 Row 30" Fold VM-5600-3230 7432.00 — —

DESCRIPTION POPULATION LIST PRICE MIXED LIST PRICE BLOCKAGE ONLY LIST PRICE

Deere 15-20' 4 Sensors VM-5510-4 $1776.00 — — VM-5100-410 $1152.00

Other 15-20' 4 Sensors VM-5518-4 1776.00 — — VM-5100-418 1152.00

Deere 15' 24 Sensors VM5610-24 5152.00 VM-5604-24M $4152.00 VM-5610-248 3902.00

Deere 20' 32 Sensors VM-5610-32 6448.00 VM-5604-32M 5050.00 VM-5610-32B 4780.00

Other 15' 24 Sensors VM-5618-24 5152.00 VM-5614-24M 4152.00 VM-5618-24B 4082.00

Other 20' 32 Sensors VM-5618-32 6448.00 VM-5614-32M 5050.00 VM-5618-32B 4780.00

Call us at 1-260-375-2415 for other drill applications. We fit nearly all folding double & triple drills.

DESCRIPTION GALLONS PER ACRE LIST PRICE GALLONS PER MINUTE LIST PRICE

4 Row VM-5540-4V $1850.00 VM-5240-4V $1578.00

6 Row VM-5540-6V 2124.00 VM-5240-6V 1848.00

8 Row VM-5540-8V 2392.00 VM-5240-8V 2116.00

12 Row 30” Fold VM-5500-1230V 3356.00 VM-5200-1230V 3080.00

16 Row 30” Fold VM-5500-1630V 3942.00 VM-5200-1630V 3664.00

There are many configurations of air seeders on the market today. We’ve found each customer and system is unique so we treat our product offerings the same way. Custom kits from Vanguard are available up to 192 sensors. Unlike our competitors, population sensors are not limited and can be placed on any of the rows desired.

Below we’ve used common CCS and tower systems for pricing examples. Give our customer service department a call at 1-260-375-2415 to get a quote for your specific make and model.

Full Population SystemsComplete system including console, harness, sensors, seed tube adapters and instructions.

VM-5600 w/ 24 Sensors VM-5800 w/ 48 Sensors $5,330.00 $10,464.00

Mixed Population/Blockage SystemsComplete system including console, harness, sensors, seed tube adapters and instructions. Systems are priced with 6 population sensors and the balance of the system with blockage sensors. More population sensors can be added at any time.


Blockage Only SystemsComplete system including console, harness, sensors, seed tube adapters and instructions.


VM-2500SE and SM500 Conversion KitsComplete system including console and adapter harnesses. Replace that old troubled module system with a new user friendly design. Cuts cost by leaving existing wiring and sensors.

VM-5800 Adapting 48 Sensors$3,870.00


Monitoring

ww


Air Drill Systems


Perfect for large Air Seeders, our new VM-5800 CAN system will support up to 192 sensors.

See page 18 for more information.

VM-58005800-32


ww

w.a

g-el

ectr

onic

s.co

m

Mon

itorin

g

SEN

SORS

Vanguard Harness and Sensor KitsFor Grain DrillsSystems on this page may be used with customer’s own monitor console.Unless followed by a suffix, all systems are configured with two (2) sensors per drill section. A suffix of -4 indicates four (4) sensors per drill section.

MONITOR MAKE AND TYPE OR MODEL Vanguard VM John Deere DICKEY-john PM Computer Older Kinze KM Trak 10 Pin Agco SM 100, 200, Monitors Series 300, (Rectangular 1000 through 3000 150, 250, 350 Plug)

JOHN DEERE “200” Series “300” Series “400” Series John Deere 750-200 750-300 750-400 2 750-1560/90 15’ $445.00 $446.00 $440.00 John Deere 750-200-4 750-300-4 750-400-4 4 750-1560/90 15’-20’ 718.00 718.00 712.00 John Deere 2750-200H 2750-300H 2750-400H 750-1560/90 30’

4 859.00 872.00 864.00 Houck 2750-200H-4 2750-300H-4 2750-400H-4 Hitch 8 1532.00 1546.00 1534.00 John Deere 2750-200 2750-300 2750-400 750-1560/90 30’

4 859.00 872.00 864.00 Deere 2750-200-4 2750-300-4 2750-400-4 Hitch 8 1532.00 1546.00 1534.00 John Deere 455-200 455-300 455-400 455 30’

6 1044.00 1052.00 1050.00 Triple 455-200-4 455-300-4 455-400-4 Drill 12 2136.00 2136.00 2142.00

KRAUSE KX18-200 KX18-300 KX18-400 Krause 2 $448.00 $460.00 $454.00 Single Drill KX18-200-4 KX18-300-4 KX18-400-4 4 722.00 734.00 726.00 KX3-200 KX3-300 KX3-400 Krause 6 1130.00 1134.00 1050.00 Triple Drill KX3-200-4 KX3-300-4 KX3-400-4 12 2278.00 2278.00 2278.00

GENERAL PURPOSE — CASE IH, GREAT PLAINS, MARLISS, TYE, CRUSTBUSTER, SUNFLOWER, UNITED UX18-200 UX18-300 UX18-400 2 7’–20’ No Till Drills $432.00 $446.00 $438.00 Deere 455/1520/1570 UX18-200-4 UX18-300-4 UX18-400-4 4 690.00 702.00 694.00 GP2-200 GP2-300 GP2-400 Folding 2 Section 4 810.00 819.00 816.00 Drills GP2-200-4 GP2-300-4 GP2-400-4 8 1459.00 1468.00 1465.00 GP3-200 GP3-300 GP3-400 Folding 3 Section 6 1044.00 1052.00 1050.00 Drills GP3-200-4 GP3-300-4 GP3-400-4 12 2182.00 2182.00 2182.00

Kits available for Early Riser Monitors Use -500 suffix and call for price


Monitoring

ww



Replacement Seed Tubes

Vanguard Replacement Seed Tubes for most popular planters. Standard Rate (.500 hole) or High Rate (.730 hole) tubes are available for most models. Our most common tubes are listed. If you do not find yours, call us at 1-260-375-2415 for more choices.

John Deere PART OEM LIST PRICE NUMBER DESCRIPTION PART NO. MODELS (EA.)

76245 Seed Tube w/ .730 hole (High Rate) A55021 7000-7100 MaxEmerge $ 8.95

76240 Seed Tube w/ .500 hole (Std. Rate) A74931 7000-7100 MaxEmerge 8.95

76235 Seed Tube Blank A74932 7000-7100 MaxEmerge 8.95

76260 Curved Seed Tube w/ .500 hole (Std. Rate) A55880 7200-7300 MaxEmerge 2 1700 MaxEmerge Plus MaxEmerge XP 10.95

76265 Curved Seed Tube w/ .730 hole (High Rate) A56788 7200-7300 MaxEmerge 2 1700 MaxEmerge Plus MaxEmerge XP 10.95

76255 Seed Tube Blank A75055 7200-7300 MaxEmerge 2 1700 MaxEmerge Plus MaxEmerge XP Replaces Deere A56788 10.95

Great Plains PART OEM LIST PRICE NUMBER DESCRIPTION PART NO. MODELS (EA.)

76245S1 Seed Tube w/ .730 Hole (High Rate) w/ sun shade 817-471C Planter Row Units $12.95

76240S1 Seed Tube w/ .500 Hole (Std. Rate) w/ sun shade 817-472C Planter Row Units 12.95

76235S1 Seed Tube Blank 817-139C Planter Row Units 12.95

Kinze PART OEM LIST PRICE NUMBER DESCRIPTION PART NO. MODELS (EA.)

76245S1 Seed Tube w/ .730 Hole (High Rate) w/ sun shade GR1771 Planter Row Units $12.95

76240S1 Seed Tube w/ .500 Hole (Std. Rate) w/ sun shade GR1774 Planter Row Units 12.95

76235S1 Seed Tube Blank Planter Row Units 12.95

76250 Kinze Octagon For KPM Series GR1461 3000 Series Planters 9.95

White/Agco PART OEM LIST PRICE NUMBER DESCRIPTION PART NO. MODELS (EA.)

10000-0050 Seed Tube w/ .500 Hole (Std Rate) W248002B 5100, 5700 Planters $35.00

10000-0060 Seed Tube w/ .730 Hole (High Rate) 853775 6000 Series Planter 10.00

Monosem PART OEM LIST PRICE NUMBER DESCRIPTION PART NO. MODELS (EA.)

46514-0020B Seed Tube w/ .730 Hole (High Rate) NG Plus Planters CALL


ww

w.a

g-el

ectr

onic

s.co

m

Mon

itorin

g Planter Replacement Sensors


A 43350-0001V1 Mate & Lock AMP Sensor Only – Std. Rate $ 65.00

B 46170-0270V1 Weather Pack Sensor Only – Std. Rate 65.00

C 46153-0200V1 Cannon Sure-Seal Sensor Only – Std. Rate 73.00

D 10189-0411V1 Allis-Chalmers 52 Planter Sensor 73.00

E 45244-0891AS1 High Rate Infrared Sensor Only 99.00

F 46776-0010S1 Case 1200 High Rate Infrared Sensor Only 115.00

H 45491-0750S1 High Rate Infrared Case/IH Cyclo Tube and Sensor 115.00

J 15135-0008A Chute & Sensor Standard Rate – JD Max Emerge, Kinze, Great Plains Finger pick up 75.50

K 45244-0971 Chute & Sensor High Rate Infrared – JD Max Emerge, Kinze, Great Plains Finger pick up 106.50

L 45244-0881A Chute & Sensor High Rate Infrared – JD Max Emerge 2/Plus – Large top opening in tube 106.50

DICKEY-john Hy Rate Plus LED Sensors G 46283-3000S1 Fits AGCO, Monosem NG Plus $144.00

G 46283-3003S1 Fits John Deere “Flush Face” Seed Tubes. XP Series only 144.00 Does not fit within stamped steel shank for Max Emerge, Max Emerge Plus or Pro

G 46283-3002S1 Fits Great Plains “Red” Seed Tube 817827 144.00

DCA

E

JH K L

B

F G


Monitoring

ww


Drill and Air Seeder Sensors / Adapters


A B

E

A C

FD

G H J


A 46526-0010S1 High Rate Grain Drill and Air Seeder Sensor $110.00

B 46742-0010S1 Recon Grain Drill and Air Seeder Sensor (Non-Counting) 57.00

C 46742-0701S1 Vigilense Blockage Sensor for 1” Hose 73.00

46742-0702S1 Vigilense Blockage Sensor with Stainless Steel for 1” Hose 109.00

46742-0711S1 Vigilense Blockage Sensor for 1¼” Hose 74.00

46742-0712S1 Vigilense Blockage Sensor with Stainless Steel for 1¼” Hose 89.00

46742-0720S1 Vigilense Blockage Sensor for 13/4” Hose 88.00

46742-0721S1 Vigilense Blockage Sensor with Stainless Steel for 13/4” Hose 108.00

D 1650-0001 Adapter Kit – Deere Grain Drill Hard Tubes 26.00 For use with High Rate and Recon Sensors (Pkg. for 2 Sensors)

E 1650-0002 Adapter Kit – Krause Hard Tubes to High Rate 26.00 or Recon Sensors (Pkg. for 2 Sensors)

F 1650-0005 Adapter Kit 1” Air Seeder tubes to High Rate 34.00 or Recon Sensors (Pkg. for 2 Sensors)

G 1650-0006 Adapter Kit 1¼” Air Seeder Tubes to High Rate 26.00 or Recon Sensors (Pkg. for 2 Sensors)

H

40978 Brush Assembly, Short, 1¼” dia. 7.00

46153-0440 Brush Assembly, Long, 2” dia. 8.00

J 66175-0030 SensrTest+ Enhanced Sensor Tester 89.00


ww

w.a

g-el

ectr

onic

s.co

m

Mon

itorin

g


66175-0030 SensrTest+ Enhanced Sensor Tester $ 89.00

AA-10 Adapter to test Single Pin Connector Sensors 18.00

CA-10 Adapter to test Cannon Connector Sensors 18.00

AA-15 Adapter to test Single Pin Connector Harness 19.00

CA-20 Adapter to test Cannon Connector Harness 19.00

66175-0650 Seed Simulator w/ Adapter Cord 249.00

66175-0660 VM4100/5100 Seed Simulator 249.00

66175-0001 Radar Simulator 129.00

66175-0070 Combo Pack – SensrTest+, Seed Simulator and Radar Simulator 442.00

66175-0300 Vanguard Population Display Simulator w/ Base 350.00

66175-0301 Vanguard Non-Population Display Simulator w/ Base 286.00




add –W 120v AC to 12v DC Wall Power Supply 59.00

Seed Monitoring Test Equipmentand Accessories

A complete tool box of diagnostic devices, a must for every farm shop and all service technicians.

The Vanguard SensrTest+ comes with a brand new feature, the ability to send a signal from the row harness to the monitor to simulate seed flow from the sensor point. Now, not only can you check the function of the seed sensor, but verify the harness all the way to the monitor.

The Vanguard Seed Simulator provides signals to most monitors and consoles to verify the ability to detect and monitor seed pulses. Simply connect to your monitor and power it up. Our simulator will generate pulses for 16 rows and the operator can check correct sensor voltage, row fail, all rows fail and row overplant. For population monitors, add the Radar Simulator for speed input.

The Radar Simulator not only provides a speed input for testing population monitors, but is a “must-have” tool for calibrating spray controllers and other devices needing a continuous speed input.

The Harness Shop

Basic Row Harness

Power Cables

Can Harness

Extensions

Adapters

Custom Harness

Prototype Harness &

Design

Harnessing the needs of today’s electronic agriculture 33

Conventional Narrow Drill Number of 30” – 38” Rows 15” – 24” Rows 6” – 12” Rows Rows 16’ Hitch Cable 16’ Hitch Cable 18’ Hitch Cable 3202A 3202J 3402A 3402J 3802A 3802J 2 $103.00 $103.00 $95.00 $95.00 $95.00 $95.00 3204A 3204J 3404A 3404J 3804A 3804J 4 148.00 148.00 134.00 134.00 134.00 134.00 3205A 3205J 3405A 3405J 3805A 3805J 5 167.00 167.00 153.00 153.00 153.00 153.00 3206A 3206J 3406A 3406J 3806A 3806J 6 189.00 189.00 177.00 177.00 173.00 173.00 3207A 3207J 3407A 3407J 3807A 3807J 7 211.00 211.00 199.00 199.00 192.00 192.00 3208A 3208J 3408A 3408J 3808A 3808J 8 237.00 237.00 224.00 224.00 218.00 218.00 3209A 3209J 3409A 3409J 3809A 3809J 9 257.00 257.00 243.00 243.00 237.00 237.00 3210A 3210J 3410A 3410J 3810A 3810J 10 313.00 313.00 295.00 295.00 287.00 287.00 3211A 3211J 3411A 3411J 3811A 3811J 11 415.00 415.00 393.00 393.00 390.00 390.00 3212A 3212J 3412A 3412J 3812A 3812J 12 499.00 499.00 479.00 479.00 466.00 466.00 3213A 3213J 3413A 3413J 3813A 3813J 13 563.00 563.00 543.00 543.00 525.00 525.00 3214A 3214J 3414A 3414J 3814A 3814J 14 582.00 582.00 563.00 563.00 543.00 543.00 3215A 3215J 3415A 3415J 3815A 3815J 15 607.00 607.00 588.00 588.00 563.00 563.00 3216A 3216J 3416A 3416J 3816A 3816J 16 632.00 632.00 613.00 613.00 588.00 588.00 3218A 3218J 3418A 3418J 3818A 3818J 18 726.00 726.00 701.00 701.00 675.00 675.00 3420A 3420J 3820A 3820J 20 N/A N/A 799.00 799.00 766.00 766.00 3422A 3422J 3822A 3822J 22 N/A N/A 894.00 894.00 868.00 868.00 3224A 3224J 3424A 3424J 3824A 3824J 24 995.00 995.00 956.00 956.00 931.00 931.00

See page 40 for instructions on ordering Custom Harness if not shown.Above harness may be combined with a “Y” cable for split row planters (page 39).Harnesses available for Early Riser and Seed Flow monitors, call for pricing.


ww

w.a

g-el

ectr

onic

s.co

m

The

Har

ness

Sho

p Vanguard HarnessTool Bar Harness for Planters and Drills DICKEY-john Style Monitors (Agco, Vanguard, Kinze 1000/3000, DICKEY-john)John Deere Computer Trak® MonitorsAll Harness built with AMP Round 37 Pin connector. Sensor Connectors – 3 Pin Weather Pack.

“A” series DICKEY-john Pin Configuration, “J” series John Deere Pin Configuration.

All harness in this table are non-folding tool bar harness. Folding harness priced separately on page 35.

KIN

ZECA

SEJO

HN

DEE

REW

HIT

E


The Harness Shop

ww


Folding & Specialty Planter


All Harness built with AMP Round 37 Pin connectorAll Harness configured for DICKEY-john Configuration with 3-wire WP Sensors

MAKE MODEL ROWS BAR TYPE PART # LIST PRICE

1200 12 Row Stack Fold 3212CSF $ 452.00

12 Row Front Fold 3212CFF 590.00


1250 16 Row Stack Fold 3216CSB 690.00


16/32 Row Pivot 3216/32CP 2288.00

1720

12 Row 12 Row Stack Fold 3212SB $ 467.00

16 Row 16 Row Stack Fold 3216SB 674.00

7000 12 Row 12 Row Front Fold 3212FF / 3212FFJ* 678.00



12 Row 12 Row NT Front Fold 3212FF2 / 3212FF2J* 678.00

1770NT 16 Row 16 Row NT Front Fold 3216FF2 / 3216FF2J* 860.00

24 Row 24 Row NT Front Fold 3224FF2 / 3224FF2J* 1093.00

1790 16/31 16/31 Row Front Fold 3216/31FF 1482.00

DB44 24 Row – 22” 24 Row Front Fold 3424FF2 1446.00

BB60 24 Row – 30” 24 Row Front Fold 3224FF 1510.00

DB90 36 Row – 30” 36 Row Front Fold 3236FF 2087.00

12 Row Pivot 3212KP $ 480.00

16 Row Pivot 3216KP 608.00

24 Row Pivot 3224KP 957.00

3600 16/31 Row Pivot 3216/31KP 1903.00

16/32 Row Pivot 3216/32KP 1953.00

12/23 Row Pivot 3212/23KP 1505.00

12/24 Row Pivot 3212/24KP 1555.00

3800 36 Row – 30” Pivot 3236KP 1976.00

MONOSEM 12/24 Row – TR Stack Fold 3212/24MSF $ 827.00

6100 Series 12 Row – 30” Vertical Fold 3212WVF $ 548.00

8100 Series

8182 12 Row – 30” All Fold 3212WH 684.00

8186 16 Row – 30” All Fold 3216WH 782.00

8200 Series 8202/8222 12 Row – 30” Wing Fold 3212WWF 560.00

8300 Series 8342 13 Row – Blk Mach 6/13 Row 3213BM 632.00

8500 Series

8524 24 Row – 30” Wide Fold 3224WWF 1336.00

8523 12/23 Row Wide Fold 3212/23WWF 1461.00

8700 Series 8772 12 Row Stack Fold 3212WSF 487.00

8816 16 Row – 30” Narrow Fold 3216WNF 1244.00

8800 Series 8824 24 Row – 30” Narrow Fold 3224WNF 1446.00

8831 16/31 Row Narrow Fold 3216/31WNF 1620.00

* Indicates John Deere Pin Configuration

John

Dee

re S

tyle

Wir

ing

DIC

KEY-

john

Sty

leW

irin

g

“A” SERIES “B” SERIES “C” SERIES 4, 6, 8 ROW 12, 16 ROW ALL PINS FILLED

1–6 ft.

37D-A-6 37D-B-6 37D-C-6 $98.00 $124.00 $212.00

7–12 ft.

37D-A-12 37D-B-12 37D-C-12 112.00 152.00 240.00

13–18 ft.

37D-A-18 37D-B-18 37D-C-18 130.00 168.00 276.00

19–25 ft.

37D-A-25 37D-B-25 37D-C-25 144.00 184.00 310.00

26+ ft.

37D-A-26 37D-B-26 37D-C-26 CALL CALL CALL

1–6 ft.

37J-A-6 37J-B-6 37J-C-6 $98.00 $124.00 $212.00

7–12 ft.

37J-A-12 37J-B-12 37J-C-12 112.00 152.00 240.00

13–18 ft.

37J-A-18 37J-B-18 37J-C-18 130.00 168.00 276.00

19–25 ft.

37J-A-25 37J-B-25 37J-C-25 144.00 184.00 310.00

26+ ft.

37J-A-26 37J-B-26 37J-C-26 CALL CALL CALL

1-6 FT. 7-12 FT. 13-18 FT. 19-25 FT. 26+ FT.

3 Pin AMP 03A-03A-6 03A-03A-12 03A-03A-18 03A-03A-25 03A-03A-26 Power $72.00 $78.00 $86.00 $98.00 CALL

4 Pin AMP 04-04-6 04-04-12 04-04-18 04-04-25 04-04-26 Radar 44.00 52.00 68.00 80.00 CALL

7 Pin 07-07-6 07-07-12 07-07-18 07-07-25 07-07-26 AMP 49.00 67.00 79.00 86.00 CALL

9 Pin 09-09-6 09-09-12 09-09-18 09-09-25 09-09-26 AMP 60.00 68.00 74.00 80.00 CALL

14 Pin 14-14-6 14-14-12 14-14-18 14-14-25 14-14-26 AMP 68.00 74.00 80.00 88.00 CALL

16 Pin 16-16-6 16-16-12 16-16-18 16-16-25 16-16-26 AMP 76.00 85.00 96.00 110.00 CALL

7 Pin 07-07-6TR 07-07-12TR 07-07-18TR 07-07-25TR N/A

Trailer 75.00 95.00 115.00 135.00


ww

w.a

g-el

ectr

onic

s.co

m

The

Har

ness

Sho

p Extension Cables37 Pin Connector

1-6 FT. 7-12 FT. 13-18 FT. 19-25 FT . 26+ FT.

2 Pin 02-02-6 02-02-12 02-02-18 02-01-25 02-02-26 WP $20.00 $22.00 $28.00 $34.00 CALL

3 Pin WP 03-03-6 03-03-12 03-03-18 03-03-25 03-03-26 Sensor 20.00 22.00 28.00 34.00 CALL

4 Pin WP 12-012-6 12-012-12 12-012-18 12-012-25 12-012-26 Square 24.00 30.00 41.00 50.00 CALL

6 Pin WP 17-55-6 17-55-12 17-55-18 17-55-25 17-55-26 Key A, F 21.00 24.00 29.00 37.00 CALL

D6-D6-6 D6-D6-12 D6-D6-18 D6-D6-25 D6-D6-26

6 Pin DT (Standard) DM6-DM6-6 DM6-DM6-12 DM6-DM6-18 DM6-DM6-25 DM6-DM6-26

Deutsch DTM (Miniature)

35.00 39.00 43.00 50.00 CALL

D12-D12-6 D12-D12-12 D12-D12-18 D12-D12-25 D12-D12-26

12 Pin DT (Standard) DM12-DM12-6 DM12-DM12-12 DM12-DM12-18 DM12-DM12-25 DM12-DM12-26

Deutsch DTM (Miniature)

47.00 55.00 63.00 70.00 CALL

9 Pin 9C-9C-6 9C-9C-12 9C-9C-18 9C-9C-25 CAN/ISO 295.00 315.00 350.00 368.00

N/A

35 Pin ER3006 ER3012 ER3018 ER3025 ER3026 Case ER 24 Row 300.00 329.00 358.00 388.00 CALL

18 Pin Deutsch 18-6-6 18-18-12 18-18-18 18-18-25 18-18-26 Frame Harness 198.00 210.00 238.00 264.00 CALL

Conxall (Raven) Extensions 1-6 FT. 7-12 FT. 13-18 FT. 19-25 FT . 26+ FT.

3 Pin 03F-03F-6 03F-03F-12 03F-03F-18 03F-03F-25 03F-03F-26 Flow Meter $45.00 $52.00 $70.00 $79.00 CALL

3 Pin 03R-03R-6 03R-03R-12 03R-03R-18 03R-03R-25 03R-03R-26 Radar 45.00 52.00 70.00 79.00 CALL

4 Pin 04C-04C-6 04C-04C-12 04C-04C-18 04C-04C-25 04C-04C-26 Control Valve 47.00 54.00 72.00 80.00 CALL

4 Pin 04V-04V-6 04V-04V-12 04V-04V-18 04V-04V-25 04V-04V-26 ON/OFF Valve 47.00 54.00 72.00 80.00 CALL

Standard length is the maximum length of each level. We will custom build any length using the above price guides.


The Harness Shop

ww


Extension Cables/Conxall (Raven) Extensions



ww

w.a

g-el

ectr

onic

s.co

m

The

Har

ness

Sho

p Vanguard Planter Monitor Adapter CablesIt’s easy to select your adapter. Find your monitor console plug type in the first column. Then, find the type of harness connector you have in the second column in the same section as your monitor. The part number and price will be to the right of the harness number.

PLANTER MONITOR HARNESS PART NO. LIST PRICE

10 Pin 37D10 $ 85.00

2 – 10 Pin 37D210* 105.00

12 Pin 37D12 100.00

2 – 12 Pin 37D212* 130.00

37 Pin JD 37D37J* 105.00

10 Pin 37J10 85.00

2 – 10 Pin 37J210* 105.00

12 Pin 37J12 100.00

2 – 12 Pin 37J212* 130.00

37 Pin Dj 37J37D* 105.00

37 Pin JD 10A37J 85.00

37 Pin Dj 10A37D 85.00

37 Pin JD 210A37J* 105.00

37 Pin Dj 210A37D* 105.00

37 Pin JD 12A37J 100.00

37 Pin Dj 12A37D 100.00

37 Pin JD 212A37J* 130.00

37 Pin Dj 212A37D* 130.00

37 Pin Dj ER10037D 165.00

37 Pin JD ER10037J 165.00

DICKEY-john Early Riser 37D-ER100 165.00

John Deere Computer Trak Early Riser 37J-ER100 165.00

*Specify number of rows used.

37 PinDj Style

37 PinJD Style

(Computer Trak)

10 Pin

12 Pin

2 – 10 Pin

2 – 12 Pin

Early Riser


The Harness Shop

ww


Vanguard “Y” Cables / Mate-N-Lock HarnessY Cables to Combine Harness for Splitter Planters and other applications. For Early Riser Monitor, use ER Adapter on page 38.

HARNESS DICKEY-JOHN STYLE JOHN DEERE STYLE COMBINATIONS 37 PIN CONNECTORS 37 PIN CONNECTORS

Combine 4/4 or 4/3 Row

237-4Y 237-4YJ $142.00 $142.00


237-6Y 237-6YJ 164.00 164.00


237-8Y 237-8YJ 192.00 192.00


237-12Y 237-12YJ 220.00 220.00


237-16Y 237-16YJ 257.00 257.00

*Custom “Y” cable configurations available upon request.


Mate-N-Lock HarnessVanguard replacement harnesses are guaranteed to perform equal to or better than original equipment. Cable comes complete with Rectangular “Jones” plug and AMP style individual wire, mate and lock sensor connectors on Heavy Duty black jacketed 18 ga. wire.

VANGUARD DICKEY-JOHN JOHN DEERE PART NO. PART NO. PART NO. DESCRIPTION LIST PRICE

UX20410 10254-0004 AB18905 4 Row – 10 Pin $145.00

UX20510 5 Row – 10 Pin for Splitters w/ 26’ Hitch Cable 185.00

UX20610 10254-0006 AB18906 6 Row – 10 Pin 180.00

UX20710 7 Row – 10 Pin for Splitters w/ 26’ Hitch Cable 230.00

UX20810 10254-0008 AB19069 8 Row – 10 Pin 220.00

UX20412 AB19227 4 Row – 12 Pin 160.00

UX20612 AB19228 6 Row – 12 Pin 195.00

UX20812 AB19229 8 Row – 12 Pin 235.00


ww

w.a

g-el

ectr

onic

s.co

m

The

Har

ness

Sho

p Vanguard Custom HarnessCopy this page and fax or mail your requirements for a quick quote on your special harness requirements. Enter numbers or lengths in boxes.

To Tractor 1 10 Pin Jones2 12 Pin Jones3 37 Pin AMP Dj4 37 Pin AMP JD5 35 Pin Deutsch6 Other - Specify

Length from HitchConnector to PottedJunction

ENTER LENGTH OF EACH ROW IN BOXES ABOVE

1 AMP Single Pins Sensor Connector Type 2 Cannon Round 3 3 Pin Weather Pack 4 Kinze Smart Sensor

Distance Sensor Hopper Sensor____ 2 Wire ____ 2 Wire____ 3 Wire ____ 3 Wire____ None ____ None

E-mail to:

Adam Douglas [email protected]

Bill Wentz [email protected]

Fax to:

1-260-375-3800Mail to:

Ag Express ElectronicsP.O. Box 346, Warren, IN 46792

mailto:adouglas%40agexpress.com?subject=Custom%20Harness

mailto:bwentz%40agexpress.com?subject=Custom%20Harness

Distance SensorsVelo L/S Velo L/T

Sprocket Sensors

Radar

Radar Y Cables

Radar Adapters

GPS Interface

In-Cab Distance Outlets

Harnessing information for your precision farming needsDistance and Speed Sensors – Interface Cables – Adapters 41


ww

w.a

g-el

ectr

onic

s.co

m

Dis

tanc

e Se

nsor

s “In-Cab” Radar Adapter CablesRadar Adapters for Deere Tractors with “In Cab” OutletsHooking various monitors up to the Deere “In-Cab” outlets is quick and easy with Vanguard Adapter Cables. We offer a full range of monitor applications for both the 2-pin and the newer 7-pin connector.

If you have multiple monitors, check out our adapter cables with 2, 3 or 4 monitor connections. They can be built to fit your specific monitor combination.

2 Pin Adapter Cables

PART NUMBER DESCRIPTION LIST PRICE

1495-0004 From Deere Outlet to Std AMP 4 Pin Monitor (Most Planter Monitors and Dj built products) $35.00

1695-0004 From Deere Outlet to 2 Monitors (Planter Monitor/ Rawson or Smart Box) 65.00

1696-0004 From Deere Outlet to 3 Monitors (Planter Monitor/Rawson or Smart Box and Spray Control) Specify make and model 75.00

1493-0004 From Deere Outlet to Raven or FMC Capture Monitor 35.00

1494-0004 From Deere Outlet to Hiniker Monitor (may require H-100 sold below) 35.00

7 Pin Adapter Cables

PART NUMBER DESCRIPTION LIST PRICE

1495-0020 From 7 Pin to Std AMP 4 Pin Round (Most Planter Monitors and Dj built products) $52.00

1495-0021 From 7 pin Outlet to 2 monitors (Planter Monitor/Rawson or Smart Box) 75.00

1495-0022 From 7 pin Outlet to one round AMP (Planter Monitor) and Raven 75.00

1495-0030 From 7 pin Outlet to three round AMP (Planter Mon/Rawson/Smart Box) 75.00

1495-0031 From 7 pin Outlet to two round AMP and one Raven 75.00

H-100 Splitter for use with Hiniker Monitors – Sure Seal output 99.00

H-100A Splitter for Hiniker Monitors – AMP 4 pin output 99.00

Vanguard “Radar-Ready” OutletThe Vanguard “Radar-Ready™” Convenience Outlet Kit is an easy way of providing quick plug-in capability for Radar in the tractor. It uses the same Britax outlet used in newer Case tractors. Installation is quick and easy. Up to two additional outlets may be daisy-chained for multiple monitor capability.

Adapter Cords for Case and Vanguard – from Outlet to Monitor

KIT NUMBER DESCRIPTION LIST PRICE

4491 DICKEY-john Monitor Cord (with Enabling Switch for Planter Monitors) $ 42.00

4492 Raven Monitor Cord 42.00

4493 Hiniker Monitor Cord (may require H-100 below) 42.00

4494 Rawson/Smart Box Monitor Cord 42.00

4498 Micro Track MT3400 Cord and Adapter 145.00

4499 Spraying Systems Cord 35.00

H-100 Splitter for use with Hiniker Monitors – Sure Seal output 99.00

H-100A Splitter for Hiniker Monitors – AMP 4 pin output 99.00


Distance Sensors

ww


Vanguard Distance SensorsNow you have a choice:


DICKEY-john™ Radar with mounting hardwarePart # RVSIII

$640.00

Velo L/SSmall compact GPS designed to connect directly to most monitors using an AMP 4 pin connector. Buy the VG2004P optional cigarette plug power cable and it becomes a stand-alone digital speedometer.

Part # 648110 $359.00

We are the largest stocking supplier of Radar and GPS distance sensors and accessory cables in the United States. Our volume permits us to offer the best prices and order turnaround time in the industry. Call us for all your distance sensor needs. 1-260-375-2415.

Velo L/TA new concept in GPS speed sensors with a 3” color touch screen and plenty of power to measure distance, acres and many other functions. A retro screen provides basic speed and acre information.

Part # 648115 $619.00


ww

w.a

g-el

ectr

onic

s.co

m

Dis

tanc

e Se

nsor

s Vanguard Distance Sensors

GPS Speed PART NO. DESCRIPTION LIST PRICE 648110 Velo L/S GPS Speed Sensor $359.00 648115 Velo L/T GPS w/ Touchscreen 619.00 648118 Velo L/T Speed Check (Tractor Pull Monitor) 619.00 647939 Velo L/T Lift Switch Adapter 46.00 647938 Velo L/T Foot Pedal Switch 115.00 46372-0150S1 Lift Switch 185.00 LS02-XX Lift Switch Extension CALL VG2004 4’ Power Cord w/ Stripped Ends 24.00 VG2004P 4’ Power Cord w/ Cigarette Lighter Plug 32.00 647320 GPS Patch Antenna 45.00 62034A Antenna Mounting Plate 15.00

Radar PART NO. DESCRIPTION LIST PRICE RVSIII DICKEY-john Radar w/ Universal Pipe Mounting Kit $640.00

Following radar kits come with OEM connector for direct attachment to tractor wiring harness 1900-0002 DICKEY-john Radar w/ 4 Pin WP Connector (John Deere), Universal Mounting Kit 670.00 1900-0003 DICKEY-john Radar w/ 3 Pin MP Connector (John Deere), Universal Mounting Kit 670.00 1900-0005 DICKEY-john Radar w/ Ford-New Holland Connector, Universal Mounting Kit 670.00 1900-0007 DICKEY-john Radar w/ Deutsch Caterpillar Connector, Universal Mounting Kit 670.00 1900-0008 DICKEY-john Radar w/ 4 Pin WP Connector (Case), Universal Mounting Kit 670.00 46783-0760 DICKEY-john Radar Hardware Kit 32.00 46783-0781 DICKEY-john Radar Vibration Isolation Hardware 26.00

Sprocket Sensors PART NO. DESCRIPTION LIST PRICE 1690-0005A Sprocket Sensor Kit w/ Cable $157.00 647128 Sprocket Sensor Only 64.00 45910-0190 Set of 60 extra Magnets for wheels larger than 151/2” 41.00

Radar Adapter Cables (To connect Radar or Velo G/S directly to an OEM wiring harness) PART NO. DESCRIPTION LIST PRICE 1690-0052 Deere / Magnavox / Phillips 4 Pin Square $35.00 1690-0053 Deere 3 Pin Metri-Pack Connector 35.00 1690-0055 Ford, New Holland 35.00 1690-0056 Caterpillar A & B Canon Connector 35.00 1690-0057 Caterpillar C, D, & E Deutsch Connector 35.00 1690-0058 Case/Steiger 4 Pin Square Weather Pack 35.00 1690-0059 Teejet w/ Triangle Deutsch 49.00 1690-0060 Adapter required for Dj / Vanguard / Kinze / Agco 3000 Series Monitor 35.00 1690-0061 Raven Connector 49.00 1690-0062 Hiniker 49.00 1690-0063 Micro Trak-3000 w/ 3 Pin W.P. 49.00 1690-0064 Micro Trak w/ 3 Pin M.P. 35.00

For Vanguard Monitor Systems and other popular Monitor and Control ApplicationsChoose from the following optional distance sensor options to complete your population monitoring system. If your tractor is already equipped with radar, choose one of the Radar Y cables. If you need assistance in which cable you need, call our customer service at 1-260-375-2415.

Velo L/S

RVSIIIVelo L/T


Distance Sensors

ww



Vanguard Distance SensorsFor Interchangeability of Monitors & Distance Sensors

“Y” Cables *Select Prefix– from left column and –Suffix from right column. MONITOR PART NO. RADAR/TRACTOR CONNECTOR PART NO. LIST PRICE

Raven 1693- Std. Dj / Case Magnum (AMP) -0001 $75.00

Hiniker** 1694- Square Magnavox / JD (W-pack) -0002 75.00

Dj / JD / Case 1695- 7000 / 8000 Series JD (M-pack) -0003 75.00

All Dj Built Monitors 1695- 2 Pin John Deere Cab -0004* 65.00

Rawson Accu-Plant 1696- Ford / NH / Case / Genisis -0005 75.00

Mid-Tech 1697- Cat Series A & B -0006 75.00

Cat Series C / Challenger -0007 75.00

Case 4WD / Steiger (W-pack) / NH -0008 75.00

Dj Radar / JD Square to Dash -0010 75.00

Challenger MT / Fendt -0041 75.00

Versatile -0014 75 .00

*1695-0004 $65.00 Double outlet (Monitor, Smart Box) *1696-0004 $75.00 Triple outlet (Monitor, Rawson, Smart Box)**Most Hiniker Models need H-100 Splitter

Adapter Cables *Select Prefix– from left column and –Suffix from right column. MONITOR DIRECTION PART NO. RADAR DIRECTION PART NO. LIST PRICE

Cat A & B Series 1487- Dj Style (AMP Round) -0001 $49.00

Cat C / Challenger 1488- Magnavox / JD (W-pack) -0002 49.00

Steiger / Case / 4WD (W-pack) 1491- JD 7 / 8000 (3 pin M-pack) -0003 49.00

Magnavox / JD (W-pack) 1492- JD 7 / 8000 2 pin Cab Conn. -0004 35.00

Raven 1493- Ford / NH / Case / Genisis -0005 49.00

Hiniker** 1494- Cat A & B Series (SS) -0006 49.00

Dj Style (AMP Round) 1495- Cat C / Challenger (Deutsch) -0007 49.00

Rawson (AMP Round) 1496- Case / Steiger 4WD (W-pack) / NH -0008 49.00

Mid Tech 1497- Challenger MT / Fendt -0041 49.00

JD 7 / 8000 (M-pack 3 pin) 1498- Raven -0013 49.00

Ford / NH / Case / Genisis 1499- Versatile -0014 49.00

**Most Hiniker Models need H-100 Splitter

Dj / Vanguard

Magnavox JD/Case

Challenger Fendt

Caterpillar

Raven

Ford / NH

Deere 2MP

Deere 3MP

Hiniker


ww

w.a

gdus

a.co

m

Dis

tanc

e Se

nsor

s

Ag Express Electronics, an Iowa corporation, is NOT affiliated with the owners of the trademarks used throughout this catalog and of the following enumerated listings: DICKEY-john® is a registered trademark of DICKEY-john® Corporation. Trimble® is a registered trademark of Trimble® Navigation. Tru Count™, Field-IQ™, FieldManager™, FmX®, FM1000™, CFX™, CFX-750™, EZ-Guide®, EZ-Boom®, EZ-Steer®, NavController™, Autopilot™, AgGPS®, are all registered trademarks of Trimble® Navigation. John Deere® is a reg-istered trademark of Deere & Company. GreenStar®, StarFire®, SprayStar®, AutoTrac®, Gator®, SpreadStar®, Computer Trak®, JD®, iTC®, Field Doc™ are all registered trademarks of Deere & Company. Ag Leader® is a registered trademark of AG Leader® Technology. Insight™, Edge™, Integra™, PF Advantage™, PF3000™, are all registered trademarks of Ag Leader® Technology. CNH® is a registered trademark of CNH Global N.V.® AFS®, IntelliView™, Steiger®, Genesis®, New Holland® are all registered trademarks of CNH Global N.V.®. Packard Weather Pack® and Metri-Pack® are registered trademarks of Aptiv® (formerly Delphi Packard Electrical Systems). Raven™ is a registered trademark of Raven™ Industries. AMP®, AMPSeal®, DEUTSCH®, Mate-N-Lok® are registered trademarks of TE Connectivity. Amphenol® is a registered trademark of Amphenol Corp. Hiniker™ is a registered trademark of Hiniker™ Company. Conxall® is a registered trademark of Conxall Corp. Molex® is a registered trademark of Molex. Apple® is a registered trademark of Apple Inc®. iPhone®is registered a trademark of Apple Inc®. Samsung® and Galaxy® are registered trademarks of Samsung Group and Samsung Electronics and it’s listed subsidiaries. Motorola® is a registered trademark of Motorola Trademark Holdings LLC. LG® is a registered trademark of the LG Corporation. HTC® is a registered trademark of the HTC Corporation. Precision Planting® and 20/20 SeedSense® are registered trademarks of Precision Planting LLC. Ag Express Electronics makes no claim to any trade-mark™ or registered trademark® that may be displayed within this catalog nor claims any affiliation with said companies. Any failure to acknowledge is inadvertent and will be corrected in the next printing upon written request.

All returns must be processed within 30 days of purchase for in-house credit. Items must be new in original package and unused. Returns may be subject to a restocking fee.

Scan this code with your

smartphone to link directly to

agdusa.com website.

Scan this code with your

smartphone to link directly to agexpress.com

website.

Buy with confidence….We accept all major

credit cards and PayPal







Connectors

AMP

Cannon

Conxall

AMPSeal

Deutsch

Packard/ Delphi

Cinch

Amphenol

MolexLargest and most diverse stock of agricultural

electronic connectors from one source! 47


ww

w.a

gdus

a.co

m

Conn

ecto

rs AMPAMP Circular Connectors – Repair Kits (Includes housing, cable clamp and terminals)

Part # A0404K4 Pin Threaded

Shell Size #11$22.00

Part # A0403K4 Pin Lock Ring


Part # A0400K4 Pin (Reverse Sex) Threaded

Radar HarnessShell Size #11

$22.00

Part # A0401K4 Pin (Reverse Sex) Flanged

Threaded Radar Harness Shell Size #11

$22.00

Part # A0402KAMP 4 Pin (Reverse Sex)

Lock Ring Radar or SpeedShell Size #11

$22.00

Part # A0317K3 Pin Power Threaded


Part # A0317FK3 Pin Power Flanged

ThreadedShell Size #17

$30.00

Part # A0318K3 Pin Power Lock Ring


Part # A0325K3 Pin Power Threaded

Reverse - AgcoShell Size # 17

$38.00

Part # A0326K3 Pin Power Lock Ring

Reverse – AgcoShell Size #17

$38.00



Part # A1609FK16 Pin Flanged


$32.00





Part # A0905FK9 Pin Flanged Threaded








Part # A0744FK7 Pin (Reversed Sex) Flanged Threaded


Part # A0745K7 Pin (Reversed Sex)

Lock RingShell Size #13

$28.00




(Harness)Shell Size #17

$34.00





$40.00




(Monitor)Shell Size #23

$46.00



$46.00


(Harness)Shell Size #23

$46.00


Part # A1631FK16 Pin Flanged Threaded


Part # A163216 Pin Lock Ring




Part # A2229K22 Pin Flanged Threaded


491-260-375-2415 www.agdusa.com

Connectors w

ww

.agdusa.com


AMPAMP Connectors – Cable Clamps and Accessories

Part # AP506AMP Pins used w/57 Pin Connectors

(Pkg. of 60)$14.00

Part # AS504AMP Sockets used w/

57 Pin Connectors (Pkg. of 60)

$17.00

Part # AP259AMP Power Pins

8-10 ga. (Pkg. of 3)$22.00

Part # AS741AMP Power Sockets

8-10 ga. (Pkg. of 3)$30.00

Part # AP261AMP Power Pins

12-14 ga.(Pkg. of 3)$16.00

Part # AS740AMP Power Sockets

12-14 ga.(Pkg. of 3)$20.00

Part # AT011AMP Pin & Socket

Extraction Tool$33.00

Part # AT015AMP Power Pin & Socket


Part # AT012AMP Hand Crimper

$65.00

Part # AT013AMP H.D. Hand

Pro Crimper$300.00

Part # AT014AMP H.D. Power

Pin Crimper$125.00

Pkg. of 12 Pkg. of 50 Part # AP332 $14.00 18-22 ga. Part # AP332L $44.00 Part # AP099 $16.00 16-18 ga. Part # AP099L $54.00

AMP CPC Pins and Sockets Pkg. of 12 Pkg. of 50 Part # AS331 $14.00 18-22 ga. Part # AS331L $44.00 Part # AS101 $16.00 16-18 ga. Part # AS101L $54.00

NOTE: Dust Caps for Threaded Connectors only

SmallWire

Clamp

LargeWire

Clamp

ReplacementLock

Rings

Part # AC662$9.00

Shell Size #11

Part # AC358$9.00

Part # AC070$9.00

Shell Size #17

Part # AC322$9.00

Part # AC138$10.00

Shell Size #23

Part # AC512$10.00

NOTE: Strain Relief and Screws included

Part # AL004Shell Size #11

$6.00


$7.00


$6.00


$7.00

Part # AD011AMP Dust CapShell Size #11

$11.00


$15.50


$15.50


$15.50




ww

w.a

gdus

a.co

m

Conn

ecto

rs

Part #A0230KAMPSeal

2 Pin Shroud$8.00

Part # A0231KAMPSeal

2 Pin Tower$8.00


3 Pin Shroud$10.00


3 Pin Tower$10.00


6 Pin Shroud$12.00


6 Pin Tower$12.00

AMP / Beau or JonesAMPSeal Repair Kits (Includes housing and 18 ga. terminals)

AMP Mate-N-Lock AMP Superseal 1.5

Beau or Jones Plug Repair Kits (Includes housing, cable clamp, and solder)

Part # A0108KAMP Mate-N-Lock

Pin Housing Kit(Pkg. of 6)$10.00

Part # A0107KAMP Mate-N-LockSocket Housing Kit

(Pkg. of 6)$10.00

Part # A0334KSuperseal

3 Pin Shroud$8.00


3 Pin Tower$8.00


4 Pin Shroud$8.00


4 Pin Tower$8.00


8 Pin Shroud$14.00


8 Pin Tower$14.00


12 Pin Shroud$20.00


12 Pin Tower$20.00

Part # A0840AMPSeal Pins

14-18 ga.(Pkg. of 12) $10.00

Part # A0841AMPSeal Sockets

14-18 ga.(Pkg. of 12) $10.00

Part # J1001K10 Pin Male

(Harness)$30.00

Part # J1002K10 Pin Female

(Monitor)$30.00

Part # J1203K12 Pin Male

(Harness)$40.00

Part # J1204K12 Pin Female

(Monitor)$40.00


Part # P0611KWeather Pack 6 Pin Shroud

(A & F Key)$6.00

Part # P0612KWeather Pack 6 Pin Tower (A & F Key)

$6.00


(B & F Key)$6.00

Part # P0614KWeather Pack 6 Pin Tower (B & F Key)

$6.00

511-260-375-2415 www.agdusa.com

Connectors w

ww

.agdusa.com


Part # P0101KWeather Pack1 Pin Shroud

(Pkg. of 4)$8.00

Part # P0102KWeather Pack1 Pin Tower

(Pkg. of 4)$8.00


(Pkg. of 4)$8.00


(Pkg. of 4)$8.00


(Pkg. of 4)$10.00


(Pkg. of 4)$10.00

Weather PackWeather Pack Repair Kits (Includes housing, seals and 18 ga. terminals)

Weather Pack Accessories


(A & D Side Key)$5.00


(A & D Side Key)$5.00


(A & D Top Key)$5.00

Part # P0428KWeather Pack 4 Pin Tower

(A & D Top Key)$5.00

Part # P0409KWeather Pack

4 Pin Square Shroud

$5.00

Part # P0410KWeather Pack

4 Pin Square Tower

$5.00

Part # PW323Weather Pack

16-18 ga. Wire Seals(Pkg. of 12)

$4.00

Part # PW899Weather Pack


$4.00

Part # PW323LWeather Pack


$18.00

Part # PW899LWeather Pack


$18.00

Part # PT012Weather PackCrimping Tool

$210.00

Part # PT011Weather Pack


Part # PC300Weather Pack

Green Cavity Plugs(Pkg. of 12)

$4.00

For more choices in connectors & ag-electronics

parts go to our website www.agdusa.com.

Not finding the connector that you need? Give us a call at

1-260-375-2415.

Weather Pack Pin Pkg. of 12 Pkg. of 100 Part # PP040 $6.00 18-20 ga. Part # PP040L $28.00 Part # PP044 $7.00 14-16 ga. Part # PP044L $32.00 Part # PP046 $8.00 12 ga. Part # PP046L $36.00

Weather Pack Socket Pkg. of 12 Pkg. of 100 Part # PS188 $6.00 18-20 ga. Part # PS188L $28.00 Part # PS184 $7.00 14-16 ga. Part # PS184L $32.00 Part # PS182 $8.00 12 ga. Part # PS182L $36.00





ww

w.a

gdus

a.co

m

Conn

ecto

rs

Part # P0201KMetri-Pack (150)

2 Pin Shroud$5.00


2 Pin Tower$5.00


3 Pin Shroud$6.00


3 Pin Tower$6.00


4 Pin Shroud$6.00


4 Pin Tower$6.00

Metri-PackMetri-Pack (150) Repair Kits (Includes housing, seals and terminals)


5 Pin Shroud$6.00


5 Pin Tower$6.00


6 Pin Shroud$7.00


6 Pin Tower$7.00


10 Pin Shroud$10.00


10 Pin Tower$10.00


2 Pin Shroud$7.00


2 Pin Tower$7.00


3 Pin Shroud$7.50


3 Pin Tower$7.50


5 Pin Shroud$7.50


5 Pin Tower$7.50

Metri-Pack (280 & 630) Repair Kits (Includes housing, seals and terminals)


7 Pin Shroud$9.00


7 Pin Tower$9.00


16 Pin Modular Plug$16.00


3 Pin Shroud$10.00


3 Pin Tower$10.00

Metri-Pack Repair Kits (Includes housing, seals and terminals)

Part # P3001KMetri-Pack 30 Pin Wedge Box

Connector (A Key) Tower$30.00

Part # P3002KMetri-Pack 30 Pin Wedge Box

Connector (B Key) Tower$30.00

Part # P3005KMetri-Pack 30 Pin

Vanguard Monitor Connector$30.00

Part # P1801KMetri-Pack 18 Pin

Vanguard Monitor Connector$26.00


531-260-375-2415 www.agdusa.com

Connectors w

ww

.agdusa.com


Metri-Pack Accessories /Cooper-BussmanTerminals, Seals and Tools

Part # PS074Metri-Pack (150)

16-24 ga. Sockets(Pkg. of 12)

$4.00

Part # PP073Metri-Pack (150)

16-24 ga. Pins(Pkg. of 12)

$4.00

Part # PW973Metri-Pack (150)

16-20 ga. Red Wire Seal(Pkg. of 12)

$3.50


22 ga. Blue Wire Seal(Pkg. of 12)

$3.50

Part # PC086Metri-Pack (150)

Cavity Plug(Pkg. of 12)

$4.00



$4.00


16-18 ga. w/ Tang(Pkg. of 12)

$4.00



$4.00


16-18 ga. Wire Seal(Pkg. of 12)

$4.00


22 ga. Gray Wire Seal(Pkg. of 12)

$4.00

Part # PC300Metri-Pack (280)


$4.00



$6.25



$6.25



$11.00



$11.00


5.15-4.4mm Wire Seal(Pkg. of 12)

$4.00


3.75-2.81mm Wire Seal(Pkg. of 12)

$4.00

Part # AT014Metri-Pack 630 12 ga. Crimper

$125.00

Part # PT013Metri-Pack

Crimping Tool$130.00

Part # PT016Metri-Pack (150)

Sealed Removal Tool$46.00

Part # PT014Metri-Pack Pin (150) & Socket Extraction Tool

$26.00

Part # PT015Metri-Pack (280) Blue


Miscellaneous Cooper-Bussman 8 Pin (Deere EPM)

Part # P0258KMetri-Pack 2 Pin Spade Fuse Holder & Cover w/ Contacts

$7.50

Part # P0450KMetri-Pack 4 Pin Relay

Connector$24.00

Part # CB08BK-KCooper-Bussman 8 Pin

Tower Black$14.00

Part # CB08GN-KCooper-Bussman 8 Pin

Tower Green$14.00

Part # CB08BL-KCooper-Bussman 8 Pin

Tower Blue$14.00




ww

w.a

gdus

a.co

m

Conn

ecto

rs DeutschDeutsch DTP Series Repair Kits (Includes housing, wedgelock and terminals)

Part # D0201KDTP06-2S

2 Pin Power Plug$10.00

Part # D0202KDTP04-2P

2 Pin Power Receptacle$12.00

Part # D0401KDTP06-4S

4 Pin Power Plug$18.00

Part # D0402KDTP04-4P

4 Pin Power Receptacle$18.00

Part # D0402FKDTP04-4P-L012

4 Pin Power Flanged Receptacle

$32.00

Part # D0211KDT04-2P

2 Pin Shroud$7.00

Part # D0212KDT06-2S

2 Pin Tower$7.00


3 Pin Shroud$8.00


3 Pin Tower$8.00


4 Pin Shroud$9.00


4 Pin Tower$9.00

Deutsch DT Series Repair Kits (Includes housing, wedgelock and terminals)


6 Pin Shroud$11.00


6 Pin Tower$11.00


8 Pin Shroud$15.00


8 Pin Tower$15.00

Part # D1221KDT04-12PA

12 Pin Shroud$25.00

Part # D1222KDT06-12SA

12 Pin Tower$25.00

Part # D1223KDT04-12PC

12 Pin Shroud$25.00

Part # D1224KDT06-12SC

12 Pin Tower$25.00

Part # D1225KDT04-12PD

12 Pin Shroud $25.00

Part # D1226KDT06-12SD

12 Pin Tower$25.00

Part # D1227KDT04-12PB

12 Pin Shroud$25.00

Part # D1228KDT06-12SB

12 Pin Tower$25.00

Buy with confidence….We accept all major credit cards and PayPal.


Part # DT100Economy

Hand Crimpers$125.00

Part # DT101Heavy Duty


551-260-375-2415 www.agdusa.com

Connectors w

ww

.agdusa.comDeutsch


Part # D0223KDTM04-2P

2 Pin Shroud$6.00

Part # D0224KDTM06-2S

2 Pin Tower$6.00


3 Pin Shroud$6.00


3 Pin Tower$6.00


4 Pin Shroud$9.00


4 Pin Tower$9.00

Deutsch DTM Series Repair Kits (Includes housing, wedgelock and terminals)

Terminals / Crimpers


6 Pin Shroud$13.00


6 Pin Tower$13.00

Part # D0831KDTM04-8PA8 Pin Shroud

$15.00

Part # D0832KDTM06-8SA8 Pin Tower

$15.00

Part # D1233KDTM04-12PA 12 Pin Shroud

$22.00

Part # D1234KDTM06-12SA 12 Pin Tower

$22.00

Part # D1255KDTM04-12PB 12 Pin Shroud

$22.00

Part # D1256KDTM06-12SB 12 Pin Tower

$22.00

Part # D1257KDTM04-12PC 12 Pin Shroud

$22.00

Part # D1258KDTM06-12SC 12 Pin Tower

$22.00

Buy from AgDUSA with confidence. Our kits are all top quality connectors purchased from the same manufacturers that the major equipment compa-nies use.

Parts are packed in ziplock bags for easy storage and identification. We carry a complete line of connec-tors for most agricultural electronic applications. Contact us if you don’t find your parts listed here.

1-260-375-2415

Pkg. of 12 Pins: Pkg. of 50 Part # DP020 $8.00 Size 20 Part # DP020L $30.00 Part # DP016 $9.00 Size 16 Part # DP016L $34.00 Part # DP012 $12.00 Size 12 Part # DP012L $45.00

Pkg. of 12 Sockets: Pkg. of 50 Part # DS021 $11.00 Size 20 Part # DS021L $42.00 Part # DS017 $11.00 Size 16 Part # DS017L $42.00 Part # DS013 $13.00 Size 12 Part # DS013L $48.00





ww

w.a

gdus

a.co

m

Conn

ecto

rs Deutsch

Part # D0301KHD14-3-16P

3 Pin Round Receptacle$18.00

Part # D0302KHD16-3-96S

3 Pin Round Plug$18.00

Part # D0991KHD10-9-1939PE9 Pin Receptacle

$30.00

Part # D0992KHD16-9-1939SE

9 Pin Plug$30.00

Part # D0971KHDP24-24-9SN-L015

9 Pin Receptacle$90.00

Part # D0972KHDP26-24-9PN-L0159 Pin Plug (Reverse)

$90.00

Deutsch HD Series Repair Kits (Includes housing and terminals, no backshell)

Part # D0973KHDP26-24-9SE-L015

9 Pin Plug$90.00

Part # D0974KHDP24-24-9PE-L015


Part # D0961KHD34-24-91PN-0599 Pin ISO Receptacle

$120.00

Part # D0962KHDB36-24-91SN-059

9 Pin CAN Plug$120.00

Part # D1411KHDP24-18-14PN


Part # D1412KHDP26-18-14SN

14 Pin Plug$45.00

Part # D1821KHDP24-24-18PNL015


Part # D1822KHDP26-24-18SNL015

18 Pin Plug$72.00




19 Pin Plug$74.00




21 Pin Plug$74.00

Part # D2921KHDP24-24-29PEL015


Part # D2922KHDP26-24-29SE-L015

29 Pin Plug$76.00




35 Pin Plug$80.00

Part # D3560KHD34-24-35SN-05935 Pin Receptacle

$120.00

Part # D3558KHD36-24-35PN-059

35 Pin Plug$120.00

Part # D4723KHDP24-24-47PEL015


Part # D4724KHDP26-24-47SEL015

47 Pin Plug$80.00

Please check out our website at

www.agdusa.com for additional listings.

CustomMade

PigtailsAvailable




Part # DW1220Size 12/16 & Size 20

Cavity Plugs(Pkg. of 12) Assorted

$4.50

Part # DW0408Size 4 & Size 8 Cavity Plugs

(Pkg. of 12) Assorted$16.00

Part # DT102KDeutsch Pin

Extraction Tools(Pkg. of 9)$50.00

Part # DT103KDeutsch Size 20 & 16Pin Extraction Tools

(1 each)$10.00

Part # DT104KDeutsch Size 12 & 8Pin Extraction Tools

(1 each)$12.00

Part # DT101Heavy Duty


Part # DC03430 Series

Size #24 Cap$30.00

Part # DC03630 Series

Size #24 Cap$30.00

571-260-375-2415 www.agdusa.com

Connectors w

ww

.agdusa.com


DeutschDeutsch Parts and Accessories

Part # AC512L015 Cable Clamp

Large Wire$10.00

Part # AC007Cable Clamp

ExtenderShell Size #23

$8.00

Part # DB244(20 Series)

Backshell #24 Used w/L015 Connectors

$7.75

Part # DB054Backshell

Use with DB244$2.50


Backshell Size #3$6.00


Backshell Size #9$6.00

Part # DC016-3Dust Cap for

HD14-3-$4.00

Part # DC014-3Dust Cap for

HD16-3-$4.00

Part # DC016Dust Cap for

HD10-9-$6.00

Part # DC014Dust Cap for

HD16-9-$6.00

Part # DC026Dust Cap forHDP24-24-

$12.00

Part # DC024Dust Cap forHDP26-24-

$12.00

Pkg. of 12 Pins: Pkg. of 50 Part # DP020 $8.00 Size 20 Part # DP020L $30.00 Part # DP016 $9.00 Size 16 Part # DP016L $34.00 Part # DP012 $12.00 Size 12 Part # DP012L $45.00

Pkg. of 12 Sockets: Pkg. of 50 Part # DS021 $11.00 Size 20 Part # DS021L $42.00 Part # DS017 $11.00 Size 16 Part # DS017L $42.00 Part # DS013 $13.00 Size 12 Part # DS013L $48.00

Pkg. of 3 Pins: Pkg. of 12 Part # DP008 $20.00 Size 8 Part # DP008L $72.00 Part # DP004 $35.00 Size 4 Part # DP004L $126.00

Pkg. of 3 Sockets: Pkg. of 12 Part # DS009 $30.00 Size 8 Part # DS009L $108.00 Part # DS005 $45.00 Size 4 Part # DS005L $160.00

Part # DB411Size 24 Panel Nut

$5.00Part # DB409Size 20 Panel Nut

Part # DB414Size 24 Lock Washer

$5.00Part # DB410

Size 20 Lock Washer




ww

w.a

gdus

a.co

m

Conn

ecto

rs Cinch/Molex/Cannon

Part # H1820KCinch 18 Pin Module Connector Plug

$26.00

Part # H3022KCinch 30 Pin Module Connector Plug

$34.00

Part # HS0873Cinch Female Sockets (Pkg. of 12)

$4.00

Cinch Repair Kits (Includes housing and terminals)

Part # M0201KMolex 2 Pin

Power Connector Shroud$12.00


Power Connector Tower$16.00


(Brown) Tower$37.50

Part # M5312KMolex 53 Pin (Black) Tower

$42.00


(Brown) Tower$42.00

Molex Repair Kits (Includes housing and terminals)

Part # MP0016Molex Power Pins

(Pkg. of 12)$10.00

Part # MS0003Molex Power Sockets

(Pkg. of 12)$10.00

Part # MS0029Molex Small Sockets

22-24 ga. Wire(Pkg. of 12)

$6.00

Part # MS0039Molex Medium Sockets

16-18 ga. wire(Pkg. of 12)

$6.00

Part # MS0049Molex Large Sockets

14-16 ga. wire(Pkg. of 12)

$10.00

Part # MW323Molex Green Wire Seals

(Pkg. of 12)$3.50

Part # MW010Molex 0.635mm


$3.00

Part # MW023Molex 1.5mm


$3.00

Part # MT001KMolex Crimping Tool Set

(Pkg. of 3)$ CALL

Part # MT002KMolex Pin & Socket Extraction Tool Set

(Pkg. of 3)$ CALL

Part # C0346K3 Pin Receptacle

$12.00

Part # C0345K3 Pin Plug$12.00

Part # C0448K4 Pin Receptacle

$12.00

Part # C0447K4 Pin Plug$12.00

Cannon Repair Kits (Includes housing, size 16 terminals and cable clamps)


591-260-375-2415 www.agdusa.com

Connectors w

ww

.agdusa.comConxall (Raven)/Trailer/Case/Britax/Amphenol/Miscellaneous


Conxall (Raven) Repair Kits (Includes housing, size 12 terminals and cable clamps)

Part # X0375K3 Pin Threaded (#12 Pins)

$20.00

Part # X0376K3 Pin Lock Ring (#12 Sockets)

$20.00

Part # X0377K3 Pin Threaded Reverse Sex

(Radar Harness – #12 Sockets)$20.00

Part # X0378K3 Pin Lock Ring Reverse Sex

(Radar – #12 Pins)$20.00

Conxall (Raven) Repair Kits (Includes housing, size 16 terminals and cable clamps)

Part # X0475K4 Pin Lock Ring(#16 Sockets)

$20.00

Part # X0478K4 Pin Threaded

(#16 Pins)$20.00

Part # X0476K4 Pin Threaded(#16 Sockets)

$20.00

Part # X0477K4 Pin Lock Ring

(#16 Pins)$20.00

Trailer / Case / Britax / Amphenol Repair Kits

Part # F0768K7 Pin TrailerReceptacle

$24.00

Part # F0769K7 Pin Trailer Plug

$22.00

Part # B0101KBritax Socket

(Case Radar outlet)$12.00

Part # B0102KBritax Plug

(Case Radar outlet)$14.00

Part # Z0705KAmphenol 7 Pin Lock Ring

for Deere In-Cab$27.00

Part # F0965KDB9 Male to Male

Null Modem Adapter$11.00

Part # F0966KDB9 Female to Female

Null Modem Adapter$11.00

Miscellaneous Repair Kits

Stand-Offs/Thumb Screws $2.00 extra per kit

Part # F0970K9 Pin Serial Port

Connector (Male)(Pkg. of 2) $11.00

Part # F0971K9 Pin Serial Port

Connector (Female)(Pkg. of 2) $11.00

Part # F0968KDB9 Male to Male Gender Adapter

$11.00

Part # F0969KDB9 Female to

FemaleGender Adapter

$11.00




ww

w.a

gdus

a.co

m

Conn

ecto

rs Connector Parts Assortments

Visit our website at www.agdusa.com for a complete listing of parts included in each kit.

DTM Series Starter Kit800502 …… $120.00Included in kit, 1 each:

2 pin tower & shroud4 pin tower & shroud8 pin tower & shroud12 pin tower & shroud - Gray12 pin tower & shroud - Green

DT Series Starter Kit800501 …… $125.00Included in kit, 1 each:

2 pin tower & shroud4 pin tower & shroud8 pin tower & shroud12 pin tower & shroud - Gray12 pin tower & shroud - Green

Deutsch Connector Master Kit800500 …… $840.00Included in kit:

2 each of the DTP, DTM & DT Series connectors

Radar Connector Repair Starter Kit800505 …… $272.00

Radar Connector Repair Master Kit800506 …… $520.00

Basic Harness Repair Kit800507 …… $280.00

Master Harness Connector Repair Kit800508 …… $720.00

AMP Power Repair Kit - JD/CNH800509 …… $220.00

AMP Power Repair Kit – AGCO800510 …… $220.00

AMP Power Master Repair Kit – JD/CNH/AGCO800511 …… $340.00

Basic Power & Distribution Repair Kit800512 …… $54.00

Master Power & Distribution Repair Kit800513 …… $564.00

Weather Pack / Metri-Pack Starter Kit800503 …… $67.00Included in kit, 1 each:

Weather Pack1 pin tower & shroud2 pin tower & shroud3 pin tower & shroud4 pin square tower & shroud6 pin Type A tower & shroudMetri-Pack2 pin tower & shroud3 pin tower & shroud5 pin tower & shroud6 pin tower & shroud

Weather Pack / Metri-Pack Master Kit800504 …… $280.00Included in kit:

Weather Pack4 - 1 pin tower & shroud4 - 2 pin tower & shroud8 - 3 pin tower & shroud2 - 4 pin square tower & shroud2 - 6 pin Type A tower & shroud2 - 6 pin Type B tower & shroudMetri-Pack4 - 2 pin tower & shroud4 - 3 pin tower & shroud4 - 5 pin tower & shroud4 – 6 pin tower & shroud






Farm Productivity

DICKEY-john

Grain Moisture Testers

Soil Compaction

Testers

Products to enhance your productivity and profitability 61


ww

w.a

g-el

ectr

onic

s.co

m

Farm

Pro

duct

ivity Grain Moisture Testers

GAC 2500The DICKEY-john GAC 2500 Series uses the newest analysis technology (149 MHz) to provide NTEP certified results.

The GAC 2500 Series reduces analysis time by using a quick, easy-to-use touch-screen operator inter-face, and by providing improved data storage and share processing. It will accurately test grain with a range of -4°F to +113°F.

Available in two versions, a GIPSA Certified and an on farm version; the elevator technology is now available to producers for peace-of-mind grain handling.

GAC 2500 AGRI

On-the-Farm Elevator Quality ................. $4480.00

GAC 2500 UGMA

GIPSA-Certified, Federal Standard ........ $6150.00

GAC 500XTThe DICKEY-john GAC 500XT is a compact, cost-effective unit for grain moisture and test weight measurement anywhere on the farm.

Easy to use with .02% repeatability, the 500XT tests all common grains and stores up to 16 calibrations in memory.

Just choose a grain, load the hopper and press a button!

GAC 500XT ...............................................................................$2486.00

List price set by manufacturer. Please call 1-260-375-2415 for best price.

Mini GAC 2500The new mini GAC 2500 handheld grain moisture analyzer offers the possibility to take the elevator technology (149MHz) into the field. The Mini GAC 2500 hand held moisture tester is designed with the same technology as the new UGMA moisture meters at the elevator.

Eliminate multiple trips to the elevator to calibrate yield monitor

Hot Corn Calibration

Control your drying process

Select the optimum field to harvest

Text or email results with Free Mobile App

Mini GAC 2500 ..........................................$999.00


Farm Productivity

ww



Grain Moisture Testers

Mini GAC / Mini GAC PlusWith the Mini GAC Plus you can measure moisture and test weight, and it is fast, easy and accurate.

It’s features include:

Menu-driven operating system

An internal scale (no pre-weighing)

USB compatibility for calibration loading

Used for over 450 grains and products

Automatic temperature compensation

Mini GAC Plus (with case) ........................................$735.00

Mini GAC (no test weight feature, no case) ...... 477.00

Mini GAC Carrying Case ........................................... 77.00

FREE

MOBILE

APP

List price set by manufacturer. Please call 1-260-375-2415 for best price.

64

ww

w.a

g-el

ectr

onic

s.co

m

Farm

Pro

duct

ivity


TestersSoil Compaction TesterThe DICKEY-john Soil Compaction Tester is a simple, easy to use management tool that can help you increase yields and decrease costs. The Soil Compaction tester can give you quick answers to the questions you need to ask about your tillage program and your field conditions. Is your soil compacted? How severe and how deep is the compaction layer? How deep do you need to till? How deep can your roots grow? Is soil compaction cutting your profits?

Features of the Soil Compaction Tester: Easy to read color coded stainless steel dial, liquid filled to reduce shock Stainless steel rod with marks every 3 inches to indicate depth Rugged, molded housing and handle

15585-0003AS1 .........................................$282.00

DJ PART NO. DESCRIPTION LIST PRICE

46347-0010 SCT Probe Tip 3/4” $34.00

46347-0040 SCT Probe Tip 1/2” 25.00

Soil Compaction Tester Parts

No one has more experience in repairing and calibrating DICKEY-john® commercial moisture testers than the people of Ag Express. Since the introduction of the highly successful GAC II in 1978, our technicians have provided repair service and calibration of the complete line of DICKEY-john® moisture testers.

Featuring: Authorized Service Centers Manufacturer trained technicians Circuit board level repairs Complete calibration and testing procedures Repair of mechanical issues Timely in season repair turnaround Loaner units available Walk in repairs available Free phone troubleshooting Repair of handheld moisture tester models Repair of printers and seed counters Limited service provided for other brands

308 Claude Road 6280 NE 14th Street 106 W Main, PO Box 28 Grand Island NE 68803 Des Moines, IA 50313 Sulphur Springs, IN 47388 308 381-2905 515 289-2746 765 533-4809

Service and Repair

2020 Warren Area Tractor and Engine ShowFeaturing John Deere Tractors, Engines and Implements

July 2–4, 2020 Each year, during the first weekend of July, the Warren Area Antique Tractor Club, Inc. holds its Annual Antique Tractor and Engine Show on the spacious grounds of The Daugherty Companies, Inc. and Ag Express Electronics. Mark your calendars for July 2–4, 2020 when the 28th Annual Tractor and Engine Show will feature John Deere. In addition to one of the area’s premier tractor shows, the Warren show is unique in that it includes a field of antique farm implements that you can watch in action. There will be corn shelling, wheat threshing, straw baling and a working sawmill.

There will be concession vendors to satisfy that hunger you may have while attending the show with sandwiches, cold drinks and special features – kettle cooked ham and beans on Saturday at noon. There will also be homemade ice cream available daily and a farmers market on site.

Saturday morning at 10 a.m. the younger generation takes over with a Pedal Tractor Pull.

The show is free to the public, is handicap accessible and offers free parking as well as golf cart shuttle service.

Directions to the show:534 E. 1st St. • Warren, IN 46792

From the South: I-69 exit 273, east on SR 218 into Warren, right at the 4-way stoplight,

3/4 mile on the right side of the road

From the North: I-69 exit 278, south on SR 5 into Warren, left at the 4-way stoplight,

3/4 mile on the right side of the road.

Watch for signs!!For more information about the Warren Area

Antique Tractor Club, Inc. or information on the 28th Annual Tractor Show, contact:

Mike Daugherty – (260) 375-6018 Tim Beeks – (260) 366-7476

Facebook at Warren Area Antique Tractor & Engine Show

https://www.facebook.com/Warren-Area-Antique-Tractor-Engine-Show-135078406519170/

2020 CATALOGGrain Drill Monitoring • Air Seeder Monitoring • Planter MonitoringLiquid Flow Monitoring • Radar & GPS Distance Sensors • “Y” Cables

Sensors • Wiring Harness • Adapter Cables • Extension CablesSpecialty Electronic Devices • Accessories

DICKEY-john Moisture Testers, Controls and Parts

260-375-2415 • Fax 260-375-3800

ag-electronics.comagdusa.com

agexpress.com

534 East First Street • P.O. Box 346Warren, IN 46792-0346




Seed and Flow Monitoring at its Best - AG …...L P0258K Metri-Pack 2 Pin Spade Fuse Holder & Cover...

Documents

Transcript of Seed and Flow Monitoring at its Best - AG …...L P0258K Metri-Pack 2 Pin Spade Fuse Holder & Cover...