Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20...
Transcript of Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20...
![Page 1: Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20 1 RS653 RS643 25 13.3 10 1 RS654 RS644 40 35.6 12 2 RS656 RS646 50 58.0 10 2 RS657](https://reader036.fdocuments.us/reader036/viewer/2022071419/611881dc8102e90b40293d93/html5/thumbnails/1.jpg)
514
GEMÜ 514 + 1436 cPos
GEMÜ 514 + 1434 µPos
GEMÜ 514 + 1435 ePos
Angle Seat Globe Control Valve,
Metal
ConstructionThe GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µPos, GEMÜ 1435 ePos positioners or the GEMÜ 1436 cPos positioner and process controller dependent on the control requirements (for features see page 12). The positioners are specially designed for GEMÜ valves and achieve optimum results when used as a system. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable sealing even after a long service life with high cycle duties. A wiper ring protects the gland packing against contamination and damage.
Features• Linear or modified equal-percentage control characteristics• Kv values from approx. 0.16 - 60.0 m³/h, depending on nominal size,
valve seat and regulating cone design• PID control system can be implemented with GEMÜ 1436 cPos• Suitable for inert, corrosive*, liquid and gaseous media and steam• Max. operating pressure 25 bar• Max. operating temperature 180°C
Advantages• Simple and fast commissioning• Good flow capability and compact design• Valve and positioner are optimally adapted to each other.
(For positioner details please refer to the relevant data sheets)• Optionally suitable for contact with food according to Regulation (EC)
No. 1935/2004 (K-No. 1935)
Sectional drawing
*see information on working medium on page 2
![Page 2: Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20 1 RS653 RS643 25 13.3 10 1 RS654 RS644 40 35.6 12 2 RS656 RS646 50 58.0 10 2 RS657](https://reader036.fdocuments.us/reader036/viewer/2022071419/611881dc8102e90b40293d93/html5/thumbnails/2.jpg)
514 2
Technical data
Working mediumCorrosive, inert, gaseous and liquid media and steam which have no negative impact on the physical and chemical properties of the body and seal material.Max. perm. pressure of working medium see tableMedia temperature -10° to 180° CMax. permissible viscosity 600 mm²/s (cSt)
Control mediumInert gases, max. 60°CFilling volume Actuator size 0: 0.050 dm³ Actuator size 1: 0.125 dm³ Actuator size 2: 0.625 dm³
Ambient conditionsMax. ambient temperature 60° C
Correlation* Kv value, operating pressure, regulating cone number Valve body material: RG 5 (code 9), 1.4435 (code 34), 1.4408 (code 37), 316L (code C1)
Nominal size Kv value [m³/h]
Operating pressure [bar] Actuator size
Regulating cone numberDN linear equal-percentage (mod.)
155 12 0 RS601 RS6115 25 1 RS600 RS610
20 10 6 0 RS602 RS61210 20 1 RS603 RS613
25 15 10 1 RS604 RS61432 24 22 2 RS605 RS61540 38 12 2 RS606 RS61650 60 10 2 RS607 RS617
* not for connection code 37, 59 and 88; standard regulating cone - see following table
Correlation* Kv value, operating pressure, regulating cone number Valve body material: 1.4435 (code 34)
Nominal size Kv value [m³/h]
Operating pressure [bar] Actuator size
Regulating cone numberDN linear equal-percentage (mod.)
152.7 12 0 RS651 RS6412.7 25 1 RS650 RS640
20 6.3 6 0 RS652 RS6426.3 20 1 RS653 RS643
25 13.3 10 1 RS654 RS64440 35.6 12 2 RS656 RS64650 58.0 10 2 RS657 RS647
* only for connection code 37, 59 and 88;
Leakage rateDIN IEC 60534-4 VI L 1 PTFE sealDIN IEC 60534-4 IV L 1 metal seal
Pressure / temperature correlation for angle seat globe valve bodies
Connection code Materialcode
Max. allowable operating pressures in bar at temperature °C*RT 50 100 150 200 250 300
1, 3C, 3D, 9 (up to DN 50) 9 16.0 16.0 16.0 16.0 13.5 - -1, 9, 17, 37, 59, 60, 3C, 3D 37 25.0 23.7 21.3 19.2 17.7 16.4 15.40, 13, 16, 17, 18, 37, 59, 60 34 25.0 24.2 21.2 19.3 17.9 16.8 15.9
47 34 19.0 19.0 16.0 14.8 13.6 12.1 10.2* The valves can be used down to -10°C RT = Room Temperature All pressures are gauge pressures.
![Page 3: Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20 1 RS653 RS643 25 13.3 10 1 RS654 RS644 40 35.6 12 2 RS656 RS646 50 58.0 10 2 RS657](https://reader036.fdocuments.us/reader036/viewer/2022071419/611881dc8102e90b40293d93/html5/thumbnails/3.jpg)
5143
0 10 20 30 40 50 60 70 80 90 100
100908070605040302010
0 10 20 30 40 50 60 70 80 90 100
100908070605040302010
1) only for connection code 1 2) Standard - metal seated (with no soft seat) 3) not for connection code 37, 59 and 88
Correlation Kv value, operating pressure, regulating cone number Valve body material: 1.4435 (code 34) , 1.4408 (code 37)1), 316L (code C1)
Nominal size Kv value[m³/h]
Operating pressure[bar] Actuator size
Regulating cone no. DN linear equal-percentage (mod.)
15
0.162) 25 1 RB207 RA4060.252) 25 1 RB208 RB4050.402) 25 1 RB209 RB4060.632) 25 1 RC205 RC4051.002) 25 1 RC206 RC4061.60 25 1 RD205 RD405
2.503) 25 1 RE207 RE407
201.60 25 1 RD206 RD4062.50 25 1 RE208 RE4084.00 25 1 RF207 RF407
6.303) 25 1 RG209 RG409
252.50 25 1 RE209 RE4094.00 25 1 RF208 RF4086.30 25 1 RG210 RG410
10.003) 15 1 RH209 RH409
324.00 25 1 RF209 RF4096.30 25 1 RG211 RG411
10.00 16 1 RH210 RH41016.00 11 1 RJ207 RJ407
406.30 25 1 RG212 RG412
10.00 18 1 RH211 RH41116.00 11 1 RJ208 RJ40825.00 18 2 RK205 RK405
5010.00 18 1 RH212 RH41216.00 12 1 RJ209 RJ40925.00 24 2 RK206 RK40640.00 15 2 RM203 RM403
Stroke [%] Stroke [%]
Kv v
alue
s [%
]
Kv v
alue
s [%
]
linear equal-percentage modified
Example Kv value diagram
The adjacent diagram shows the approximative curve of the Kv value characteristic. The characteristic may deviate dependent on valve body, nominal size, regulating cone and valve stroke.
![Page 4: Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20 1 RS653 RS643 25 13.3 10 1 RS654 RS644 40 35.6 12 2 RS656 RS646 50 58.0 10 2 RS657](https://reader036.fdocuments.us/reader036/viewer/2022071419/611881dc8102e90b40293d93/html5/thumbnails/4.jpg)
5144
Order data
Body configuration Code2/2-way body D
Order example 514 25 D 9 37 5 1 1 RS614Type 514Nominal size 25Body configuration (code) DConnection (code) 9Valve body material (code) 37Seat seal (code) 5Control function (code) 1Actuator size (code) 1Regulating cone (R-No.) RS614
For the technical data and order data of the positioners please refer to data sheets GEMÜ 1434, 1435 and 1436. Please also note the table on the last page.
Connection CodeButt weld spigotsSpigots DIN 0Spigots DIN 11850, series 1 16Spigots DIN 11850, series 2 17Spigots DIN 11850, series 3 18Spigots SMS 3008 37Spigots ASME BPE 59Spigots EN ISO 1127 60Threaded connectionsThreaded sockets DIN ISO 228 1Threaded sockets BS 21 Rc length DIN 3202-4 series M8 3CThreaded spigots DIN ISO 228 9Threaded sockets NPT length DIN 3202-4 series M8 3DFlangesFlanges EN 1092 / PN25 / form B, 13Flanges ANSI CLASS 125/150 RF 47Bodies with clamp connections available on request
Seat seal CodePTFE 5PTFE, glass reinforced 5GSteel (standard up to Kv value 1.00 m³/h) 10** R-No. on request
Actuator size Flow CodeActuator 0 piston ø 50 mm under the seat 0Actuator 1 piston ø 70 mm under the seat 1Actuator 2 piston ø 120 mm under the seat 2
Flow under the seat
Control function CodeNormally closed (NC) 1Double acting (DA) 3*Double acting (normally open) 8** R-No. on request
Regulating cone R-No.For the regulating cone no. (R-No.) - linear or equal-percentage (mod.)- please refer to the table
Valve body material Code(Rg 5) CC499K, Cast bronze 91.4435 (ASTM A 351 CF3M 316L), Investment casting 341.4408, Cast stainless steel 37
![Page 5: Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20 1 RS653 RS643 25 13.3 10 1 RS654 RS644 40 35.6 12 2 RS656 RS646 50 58.0 10 2 RS657](https://reader036.fdocuments.us/reader036/viewer/2022071419/611881dc8102e90b40293d93/html5/thumbnails/5.jpg)
5145
LA
HSW
45°
LAR
HA
R
B
42
45°
Actuator size0 1 2
DN SW H/LA Weight H/LA Weight H/LA Weight15 36 151 0.9 162 1.4 - -20 41 161 1.1 172 1.6 239 -25 46 161 1.3 172 1.8 239 -32 55 - - 180 2.4 247 4.640 60 - - 186 2.7 253 5.550 75 - - 194 3.4 261 6.4
DN Actuator size
Control function øB LAR / HAR
15 0 1 71 2261 1 96 233
20 0 1 71 2361 1 96 243
25 1 1 96 24332 1 1 96 25140 1 1 96 25750 1 1 96 264
Dimensions - GEMÜ 514 [mm]
GEMÜ 514 without positioner [mm] / Weight [kg]
GEMÜ 514 with 1434 µPos
![Page 6: Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20 1 RS653 RS643 25 13.3 10 1 RS654 RS644 40 35.6 12 2 RS656 RS646 50 58.0 10 2 RS657](https://reader036.fdocuments.us/reader036/viewer/2022071419/611881dc8102e90b40293d93/html5/thumbnails/6.jpg)
5146
AR
LAR
45°
90
B
HAR
17090
LAR
HAR
45°
B
88
GEMÜ 514 with 1435 ePos
DN Actuator size
Control function øB LAR HAR AR
150 1 71 206 300 118
1 1 96 196 291 1183 and 8 96 213 307 118
20
0 1 71 216 310 118
1 1 96 206 300 1183 and 8 96 223 317 118
2 1 164 278 392 1683 and 8 164 308 401 138
25 1 1 96 206 300 1183 and 8 96 223 317 118
321 1 96 214 308 118
3 and 8 96 231 325 118
2 1 164 286 400 1683 and 8 164 316 409 138
401 1 96 220 314 118
3 and 8 96 236 331 118
2 1 164 292 406 1683 and 8 164 322 414 138
501 1 96 227 322 118
3 and 8 96 244 338 118
2 1 164 300 413 1683 and 8 164 329 422 138
GEMÜ 514 with 1436 cPos
DN Actuator size
Control function øB LAR / HAR
150 1 71 280
1 1 96 2703 and 8 96 287
200 1 71 290
1 1 96 2803 and 8 96 297
25 1 1 96 2803 and 8 96 297
321 1 96 288
3 and 8 96 305
2 1 164 3603 and 8 164 373
401 1 96 294
3 and 8 96 310
2 1 164 3663 and 8 164 379
501 1 96 301
3 and 8 96 318
2 1 164 3743 and 8 164 387
![Page 7: Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20 1 RS653 RS643 25 13.3 10 1 RS654 RS644 40 35.6 12 2 RS656 RS646 50 58.0 10 2 RS657](https://reader036.fdocuments.us/reader036/viewer/2022071419/611881dc8102e90b40293d93/html5/thumbnails/7.jpg)
5147
L
dsLB
45°
FTF
D
L
45°
LB
k
Body dimensions [mm]
Butt weld spigots, connection code 0, 16, 17, 18, 37, 59, 60Valve body material: 1.4435 (code 34), 1.4408 (code 37)
Connection codeMaterial code 34
Material code 37 0 16 17 18 37 59 60
DN L LB L LB ø d s ø d s ø d s ø d s ø d s ø d s ø d s15 105 35.5 100 33 18 1.5 18 1.0 19 1.5 20 2.0 - - 12.70 1.65 21.3 1.620 120 39.0 108 33 22 1.5 22 1.0 23 1.5 24 2.0 - - 19.05 1.65 26.9 1.625 125 38.5 112 32 28 1.5 28 1.0 29 1.5 30 2.0 25.0 1.2 25.40 1.65 33.7 2.032 155 48.0 137 39 - - 34 1.0 35 1.5 36 2.0 - - - - 42.4 2.040 160 47.0 146 40 40 1.5 40 1.0 41 1.5 42 2.0 38.0 1.2 38.10 1.65 48.3 2.050 180 48.0 160 38 52 1.5 52 1.0 53 1.5 54 2.0 51.0 1.2 50.80 1.65 60.3 2.0
For materials see overview on page 9
Flanges, connection code 13, 47Valve body material: 1.4435 (code 34)
DN FTF LB ø D ø L ø k Number of bolts15 210 72 95 14 65 420 280 78 105 14 75 425 280 77 115 14 85 432 310 89 140 18 100 440 320 91 150 18 110 450 330 95 165 18 125 4
![Page 8: Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20 1 RS653 RS643 25 13.3 10 1 RS654 RS644 40 35.6 12 2 RS656 RS646 50 58.0 10 2 RS657](https://reader036.fdocuments.us/reader036/viewer/2022071419/611881dc8102e90b40293d93/html5/thumbnails/8.jpg)
5148
45°
R
tL
LB
SW 2
Body dimensions [mm]
Threaded sockets DIN, connection code 1Valve body material: Cast bronze (code 9), 1.4408 (code 37)
DN L LB R t SW215 65 16.5 G 1/2 15.0 27 hexagonal20 75 17.5 G 3/4 16.3 32 hexagonal25 90 24.0 G 1 19.1 41 hexagonal32 110 33.0 G 1 1/4 21.4 50 octagonal40 120 30.0 G 1 1/2 21.4 55 octagonal50 150 40.0 G 2 25.7 70 octagonal
For materials see overview on page 9
Threaded sockets NPT, BS 21 Rc, connection code 3C, 3DValve body material: Cast bronze (code 9), 1.4408 (code 37)
Connection code3C 3D
DN L LB SW2 R t R t15 65 16.5 27 hexagonal Rc 1/2 16.0 1/2” NPT 16.020 75 17.5 32 hexagonal Rc 3/4 16.3 3/4” NPT 16.325 90 24.0 41 hexagonal Rc 1 19.1 1” NPT 17.032 110 33.0 50 octagonal Rc 1 1/4 21.4 1 1/4” NPT 18.040 120 30.0 55 octagonal Rc 1 1/2 21.4 1 1/2” NPT 18.050 150 40.0 70 octagonal Rc 2 25.7 2” NPT 18.0
For materials see overview on page 9
![Page 9: Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20 1 RS653 RS643 25 13.3 10 1 RS654 RS644 40 35.6 12 2 RS656 RS646 50 58.0 10 2 RS657](https://reader036.fdocuments.us/reader036/viewer/2022071419/611881dc8102e90b40293d93/html5/thumbnails/9.jpg)
5149
L
45°
R
tLB
Threaded spigots, connection code 9 Valve body material: Cast bronze (code 9), 1.4408 (code 37)
DN L LB t R15 90 25 12 G 3/420 110 30 15 G 125 118 30 15 G 1 1/432 130 38 13 G 1 1/240 140 35 13 G 1 3/450 175 50 15 G 2 3/8
For materials see overview below
Body dimensions [mm]
Overview of metal bodies for GEMÜ 514Threaded connections Flanges
Connection code 1 3C 9 3D 13 47Material code 9 37 9 37 9 37 9 37 34 34
DN 15 X X X X X X X X X XDN 20 X X X X X X X X X XDN 25 X X X X X X X X X XDN 32 X X X X - X X X X XDN 40 X X X X X X X X X XDN 50 X X X X X X X X X X
Overview of metal bodies for GEMÜ 514Spigots
Connection code 0 16 17 18 37 59 60Material code 34 34 34 37 34 34 34 34 37
DN 15 X X X X X - X X XDN 20 X X X X X - X X XDN 25 X X X X X X X X XDN 32 - X X X X - - X XDN 40 X X X X X X X X XDN 50 X X X X X X X X X
![Page 10: Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20 1 RS653 RS643 25 13.3 10 1 RS654 RS644 40 35.6 12 2 RS656 RS646 50 58.0 10 2 RS657](https://reader036.fdocuments.us/reader036/viewer/2022071419/611881dc8102e90b40293d93/html5/thumbnails/10.jpg)
51410
Information - Specifications
![Page 11: Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20 1 RS653 RS643 25 13.3 10 1 RS654 RS644 40 35.6 12 2 RS656 RS646 50 58.0 10 2 RS657](https://reader036.fdocuments.us/reader036/viewer/2022071419/611881dc8102e90b40293d93/html5/thumbnails/11.jpg)
51411
Information - Specifications - GEMÜ standard regulating cones
![Page 12: Sectional drawing - HENNLICH · 2015. 8. 3. · 2.7 25 1 RS650 RS640 20 6.3 6 0 RS652 RS642 6.3 20 1 RS653 RS643 25 13.3 10 1 RS654 RS644 40 35.6 12 2 RS656 RS646 50 58.0 10 2 RS657](https://reader036.fdocuments.us/reader036/viewer/2022071419/611881dc8102e90b40293d93/html5/thumbnails/12.jpg)
GEMÜ 530 + 1434 µPos
GEMÜ 532 + 1435 ePos
GEMÜ 534 + 1436 cPos
GEMÜ 550 + 1434 µPos
GEMÜ 554 + 1435 ePos
For further globe valves, accessories and other products, please see our Product Range catalogue and Price List. Contact GEMÜ.
Other GEMÜ control valvesPositioner functions / features1434 µPos 1435 ePos 1436 cPos
Controller typePositioner X X X
Process controller XControl air flow
Version 1 15 l/min 50 l/min 100 l/minVersion 2 90 l/min 180 l/min
OperationLocal display / keypad X X
Status display X X XWeb browser user X
Field bus (Profibus DP, Device Net) X
Signal24V DC / 3-wire X X X
BodyPlastic X X
Aluminium / industrial XFunctions
Automatic initialisation X X XAlarm / error outputs X X
Min/max positions adjustable X X
GEMÜ 1434 µPos not available for actuator size 2
For detailed information on positioners and process controllers please refer to the adjacent brochure.
Tech
nica
l dat
a sh
eet
Subj
ect t
o al
tera
tion
· 12/
2012
· 88
3423
57Sh
ould
ther
e be
any
dou
bts o
r misu
nder
stand
ings,
the
Ger
man
vers
ion o
f this
dat
a sh
eet is
the
auth
orita
tive
docu
men
t!
Positioners and process controllersfor linear and quarter turn valves
VALVES, MEASUREMENTAND CONTROL SYSTEMS
GEMÜ Gebr.Müller · Apparatebau GmbH & Co.KG · Fritz-Müller-Str. 6-8 · D-74653 Ingelfingen-Criesbach · Telefon +49(0)7940/123-0 · Telefax +49(0)7940/[email protected] · www.gemu-group.com