To o ls fo r Li fe

VDE Insulated Safety Tools

1010

National Number0861-GEDORE

(0861-433673)

Code No. Excl VAT

1747045 VDE 2133 3mm 225 70 342.00

1747053 VDE 2133 4mm 225 70 342.00

1747061 VDE 2133 5mm 225 75 342.00

1747088 VDE 2133 6mm 225 75 353.00

1747096 VDE 2133 7mm 235 105 379.00

1747118 VDE 2133 8mm 235 110 409.00

1747126 VDE 2133 9mm 235 130 439.00

1747134 VDE 2133 10mm 245 130 448.00

1747142 VDE 2133 11mm 245 170 521.00

1747150 VDE 2133 12mm 245 170 558.00

1747169 VDE 2133 13mm 245 180 618.00

1747177 VDE 2133 14mm 245 230 649.00

1747185 VDE 2133 17mm 245 240 736.00

Code No. Excl VAT

37641 VDE 160PHS 420i PH1x80 140 22 52.90

37642 VDE 160PHS 420i PH2x100 170 60 73.20

37643 VDE 160PHS 420i PH3x150 200 100 91.60

Code No. Excl VAT

37638 VDE 170ELS 400i 0.5x3x100 155 22 39.30

37639 VDE 170ELS 400i 0.8x4x100 180 27 41.90

37640 VDE 170ELS 400i 1.2x6.5x150 215 42 70.10

VDE INSULATED SAFETY TOOLS

- Only tools bearing these test symbols are classed as insulated tools- VDE insulation as per standard EN60900, IEC/CEI900, VDE0680- Safe working in high-voltage areas.- Up to 1000V alternating current.- Up to 1500V direct current.

INSULATED SAFETY TOOLS

VDE 160PHILLIPS SCREWDRIVERSFor Phillips recess screws.Fully insulated blade as per DIN EN 60900 with impact resistant red handle.CROME VANADIUM MOLYBDENUM Steel with black tip.

Items can be carded for an additional R2.75Quote code + C. eg: 376410C

VDE 170ELECTRICIAN’S SCREWDRIVERSFor slotted screws.Fully insulated blade as per DIN EN 60900 with impact resistant red handle.CROME VANADIUM MOLYBDENUM Steel with black tip.

ELS/PH SETVDE SET

Code No. Excl VAT

96640 VDE ELS/PH 580 369.00160PHS PH1x80 PH2x100 PH3x150170ELS 0,5x3x100 0,8x4x100 1,2x6,5x150

SOCKET WRENCHIn tough, resillient plastic. Head depth 25mm.CROME VANADIUM Steel with VDE insulation as per DIN EN 60900.

VDE 2133

1010

Items can be carded for an additional R2.75Quote code + C. eg: 37638C

VDE INSULATED SAFETY TOOLS

VDE 4507TORQUE WRENCHWith automatic short-way release and acoustic signal. Manually adjustable double scale with metric and SAE values.Fine toothed ratchet with VDE insulation as per DIN EN 60900.

Code No. Nm / lbf-ft Excl VAT

6681920 VDE 4507-4 T Wrench 8-56 / 5-40 620 1500 8,879.00

VDE 4522CABLE KNIFEWith strong, straight, heat-treated blade. Handle in tough, resillient plastic.With VDE insulation as per DIN EN 60900.

Code No. Excl VAT

6690400 VDE 4522 100 245.70

VDE 4614VOLTAGE TESTERTwin-pole with LED display. AC and DC voltages from 12 - 690VAcoustic continuity testing up to 500KOhm.Single pole phase testing > 100V AC.With VDE insulation as per DIN EN 60900.

Code No. Excl VAT

6698220 VDE 4614 186 2,046.00

VDE 8098STRIPPING PLIERSWith opening stop, spring and brass adjusting screw for wires 0,8-6,0mm2.Gedore special hardened and tempered steel, chrome plated.Handles with VDE insulation as per DIN EN 60900.

Code No. Excl VAT

6708980 VDE 8098-160 160 150 621.00

VDE 8099STRIPPING PLIERSSelf adjusting for wires 0,5-5,0mm2.Gedore special hardened and tempered steel, chrome plated.Handles with VDE insulation as per DIN EN 60900.

Code No. Excl VAT

6709600 VDE 8099-160 160 170 1,095.00

1010

180CABLE SHEARS - INSULATEDCuts cable up to 35mm, solid material up to 180mm2

Code No. Excl VAT

6430330 180-23 620 1500 4,943.00

SOCKET WRENCH SETVDE NUT DRIVER SET

Code No. Excl VAT

1747260 2133 / 10 1300 4,716.00

Contents:

5,0 6,0 7,0 8,0 9,0 10,011,0 12,0 13,0 14,0

Code No. Excl VAT

6743540 VDE 8314 - 140 140 160 630.00

6743620 VDE 8314 - 160 160 190 643.00

Code No. Excl VAT

6720090 VDE 8250-180 180 280 671.00

6720250 VDE 8250-200 200 360 711.00

6720330 VDE 8250-225 225 425 791.00

Code No. Excl VAT

6721730 VDE 8132AB-160 160 150 737.00

6721810 VDE 8132AB-200 200 210 779.00

Code No. Excl VAT

6721570 VDE 8132 - 160 160 150 657.00

6721650 VDE 8132 - 200 200 210 709.00

COMBINATION PLIERSFor the hardest constant use. To cut all wire types including piano wire.Good lever action for easy cutting. In heat treated steel as per DIN EN 10083.Oil-harderned, chrome plated.Cutting edges inductively rehardened, approx. 64 HRCHandles with VDE dipped insulation as per DIN EN 60900.

VDE INSULATED SAFETY TOOLS

VDE 8132NEEDLE NOSE PLIERSLong, fl at jaws and straight gripping surfaces.Face hardness approx. 62 HRC.Gedore special hardened and tempered steel, chrome plated.Handles with VDE insulation as per DIN EN 60900.

VDE 8132ABNEEDLE NOSE PLIERS - angledLong, fl at jaws and angled gripping surfaces.Face hardness approx. 62 HRC.Gedore special hardened and tempered steel, chrome plated.Handles with VDE insulation as per DIN EN 60900.

VDE 8250

VDE 8314VDE 8314 SIDE CUTTERSFor hard wires. In heat treated steel as per DIN EN 17.200. Oil-harderned, chrome plated.Cutting edges inductively rehardened, approx. 64 HRCHandles with VDE dipped insulation as per DIN EN 60900.

VDE 8316SIDE CUTTERS - American PatternFor hard wires. In heat treated steel as per DIN EN 17.200. Oil-harderned, chrome plated.Cutting edges inductively rehardened, approx. 64 HRCHandles with VDE dipped insulation as per DIN EN 60900.

Code No. Excl VAT

6742570 VDE 8316 - 200 200 350 902.00

1010

VDE 8122ROUND NOSE PLIERSLong, round jaws and serrated gripping surfaces.Gedore special hardened and tempered steel, chrome plated.Handles with VDE insulation as per DIN EN 60900.

Code No. Excl VAT

6717110 VDE 8122 -160 160 180 661.00

VDE 8120FLAT NOSE PLIERSLong, fl at jaws and serrated gripping surfaces.Gedore special hardened and tempered steel, chrome plated.Handles with VDE insulation as per DIN EN 60900.

Code No. Excl VAT

6715330 VDE 8120 - 160 160 200 661.00