Section- 1: Qualification and Experienceiciea.cumhuriyet.edu.tr/images/abass.pdf · Dossier of Dr....
Transcript of Section- 1: Qualification and Experienceiciea.cumhuriyet.edu.tr/images/abass.pdf · Dossier of Dr....
1
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
Personal Details
Name: ABBAS SAEED HAKEEM
Address: Center of Research Excellence in Nanotechnology (CENT)
King Fahd University of Petroleum & Minerals KFUPM Box 5040, Dhahran 31261 Kingdom of Saudi Arabia
Phone: + 966(13) 860 7834 (W)
Mobile: + 966 595435480
Fax: + 966(13) 860 7264
E-Mail: [email protected]
1.2. Academic Achievement
1.2.1. Education
Degree Major Field and
Specialization Institution Date Class
PhD Materials
Chemistry
University Of Stockholm (Arrhenius
Laboratories) Sweden. 2007 -
MSc (Engineering)
Materials Science Department Of Materials, Leeds
University, Leeds, West Yorkshire, U.K. 2001
First
Class
BSc (Engineering)
Materials Science Institute Of Engineering And Technology,
University Of The Punjab, Lahore,
Pakistan
1997 First
Class
PhD Dissertation
Novel Route of Oxynitride Glass Synthesis and Their Characterization
Project before PhD.
Six-Month Project on Sialon Materials, (2002) Carry On Same Project As A PhD Project On Ln-
Sion Glasses, Its Synthesis, And Characterization.
M.Sc. MATERIALS ENGINEERING
Tempering Of Engineering Steel (MSc. Eng. Thesis title)
B.Sc. FINAL YEAR PROJECTS
Process Design on Aluminum Fan Plate, Applying Following Processes Respectively; Pressure Die-
casting and Centrifugal Casting.
Courses studied during PhD and Master Studies
Section- 1: Qualification and Experience
2
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
PhD: Materials Chemistry, Solid State Chemistry, Nanostructured Materials (Kth, Sweden), and Advance
Transmission Electron Microscopy.
Master: Characterization of Materials, Thermodynamics of Materials, Phase Transformation, Materials Science,
Properties of Materials and Physical Metallurgy.
1.3. Computer Knowledge and Skills
Operating: Windows, NT Explorer, Microsoft Office, Endnote, Corel Draw, Origin, Diamond, Easy Plot, Carinev3, Matlab. etc. and Management and Entrepreneurship.
1.4. Research Skills and Interests
Advanced Materials Development For Engineering Applications
Synthesis of Hard, Light Materials and Composites Materials
Ceramics and Polymeric Membrane Development
Sintering of Nano-Structured Light Metals And Composites By Advance Sintering Techniques
Cubic Boron Nitride Nanocomposites for Harsh Conditions
Development and Management of Client-Focused R&D Programs
High-performance Thermoelectric Nanostructured Materials
Project Planning and Management
1.5. Employment History
September 2010 to Present
Center of Research Excellence in Nanotechnology Research Institute King Fahd University of Petroleum & Minerals
Job Title Research Scientist II (Associate Professor)
Job Description and Responsibilities
To perform assigned tasks under the immediate supervision of CENT Director
Independently applies advanced scope of scientific knowledge and principles in planning and executing lab research, and other labs issue such as purchase, service and maintenance etc.
To conduct research at CENT and take care of imaging lab allocated in the building of Research Institute. Imaging lab consists of various equipment, such as dual beam, XRD, microCT, Fluorescent optical microscope and AFM. To give support to conduct experiments for CENT members, as well as, rest of other scientists, master and PhD scholars at the University and national level
Support in the Characterization and Nano-Powder Metallurgy Labs of CENT
Assist in multidisciplinary client-funded projects and R&D programs
Responsibilities, Planning, managing and coordinating activities of multi-disciplinary and multi-national research teams
Development of strategic plan for the CENT
Developing and marketing research ideas, and preparing proposals,
Teaching and Training Activities; such as; tutorial, seminar, summer training, workshops, Student Mentorship Program and coop training program etc.
January 2007 to June 2010
Department of Materials Science, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology,
3
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
KPK, Pakistan
Job Title Assistant Professor
Job Description and Responsibilities
Teaching both level undergraduate and graduate students (two courses per semester to Materials Science students)
Courses Including Ceramics And Glasses, Ceramics Engineering, X-Ray Diffraction And Crystallography, Strength Of Materials, Powder Metallurgy, Materials Science (Basic), Alloy Production, Heat Treatment & Processes, Thermodynamics of Materials, Materials Characterization Techniques And Casting Tech. & Foundry Technology, Etc.)
Supervised Of Undergraduate Senior Project Design
Advisor Of Undergraduate Students For Three Years
Internship Coordinator
Internal Examiner of Master Degree/ PhD Candidates (Shape Memory Alloys, Glass Coating, Role Of CNT Addition & Processing Parameters on Alumina-Based Composite, Etc.)
External Examiner (For Final Year Project At Punjab University, Pakistan)
Internal Examiner (Master And PhD Thesis At GIK Institute)
Summer Internship Coordinator For 12 To 15 Weeks Training At Local Industries As Well As; Foreign Universities Such As; Stockholm University, University Of Calgary And KAIST And Responsible For Technical Report Evaluation
Taught basic materials chemistry course at Stockholm University till 2006
Industrial and Entrepreneur Work Experience
Burhan Woollen Mills (Pvt.) Ltd. Wah Cant. Pakistan
Job Description: Maintenance Superintendent Engineer and Junior Executive (1990-1992)
Pakistan Ordinance Factories, Wah Cant., Pakistan
Job Description: Engineer (1995)
Area Of Training: Foundry Factory, Forging Shop, Machining Shop, Heat Treatment Shop,
Tungsten Alloy Factory, Materials Testing Laboratory, Precision Casting Factory, Pattern
Making Shop, Quality Control Section
Ahu Tanning and Finishing (Pvt.) Ltd., Gujrat, Pakistan
Job Description: Assistant to Chief Technologist and Materials Science Engineer, (1997-
1999)
Siyab Textile Public Ltd., Gujrat, Pakistan
Job Description: Director (1992-2005)
2.1. Research Activity at KFUPM
Section-2: R&D Accomplishments
4
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
To provide support to conduct experiments for CENT members, as well as, rest of other scientists,
master and PhD scholars at the University and national level. As well as scientists must be meticulous
in their duties of collecting, analyzing and compiling data, preparing reports and maintaining records.
This also involves the most importantly the discussion of the results, i.e. structures and morphologies
of the synthesized nano-micro materials and their solution and the understanding of the (FESEM and
XRD) structures. In short; as a scientist, I have an experience (more than 15 years) on various
techniques and equipment, which could be valuable to take care and provide useful guidance to the
engineers and helping to conduct experiments.
The work ensures its relevance to the Center’s mission and vision. I also provide support on client-
funded as well as; NSTIP funded projects in the capacity of co-investigator and principal investigator
respectively; details are appended in the project involvement section. Due to multidisciplinary nature of
the work, extensive research collaborations are also in place to ensure the quality and strategic
relevance to overall Center’s research objectives. Responding to this issue, I have fostered
collaborations at KFUPM and with other universities within the Kingdom and outside. Some of my
published papers and ongoing research activities are resulted from this collaborative work,and
contributes towards KFUPM international image.
I am a regular reviewer for several journals, research projects (for different funding authority), and have
acted as an external examiner for a number of PhD and MS thesis. I have further attended and
presented at national and international conferences.
2.2. R&D Contributions and Accomplishments
Characterization of materials and consultancy, etc. Saudi-Aramco Saudi Arabia
Characterization of materials and consultancy, etc. Yokogawa Saudi Arabia
Characterization of materials and consultancy, etc. Halliburton Saudi Arabia
Characterization of materials and consultancy, etc. Baker Hughes Saudi Arabia
2.3. Publications (Table- 2.3. A - C)
Published above Fifth research papers in refereed ISI journals and few manuscripts are
submitted or under preparation
Over Eighteen (18) international conference oral presentations
(Appendix-1)
2.4 Patent
457895US8: Sialon Ceramics And A Method Of Preparation Thereof (Filled)
2.5 Non-Self Citations
Over four hundred no-self citation (Appendix-2)
3.1. Funded Research Projects at KFUPM
3.1.1. Completed, Ongoing and Approved
Project Title
Start Date/ End Date
Role
Section- 3: Professional Performance and Leadership
5
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
Project Number and Funding Organization
Total Value of Project
(SAR) 10-NAN1387-04 (NSTIP)
Development of Highly Efficient Visible-light-driven Mesoporous Nanostructured Materials for Photocatalytic Applications
Sept. 2011/ Aug. 2013 (completed)
1,998,000
CO-I, leading critical task
10-NAN1388-04 (NSTIP)
Development of Advanced and Functional Nanostructured Mesoporous Zeolites for Hydrodesulphurization and Other Catalytic Applications in Petroleum and Petrochemicals
Sept. 2011/ Aug. 2014 (completed)
20,00,000
CO-I, leading critical task
10-ENE1375-04 (NSTIP)
Development of Nitrogen Modified CNTs as Pt-Free Catalyst for Fuel Cell Applications
Sept, 2011/ Aug, 2015 (completed)
1,980,000 CO-I, leading critical task
10-NAN1392-04 (NSTIP)
Carbon Nanofibers Grown on 3-D Solid Structures for Applications in Energy-Related Catalysis
Sept, 2011/ April, 2015 (completed)
1,980,000
CO-I and leading critical task
12-ADV2411-04 (NSTIP)
Processing and characterization of SiAlON-based ceramic nanocomposites reinforced with SiC and WC nanoparticles for cutting tool and wear resistance applications
Sept., 2013/ Aug. 2016
19,96,000 PI, managing overall project work and leading critical
task
12-NAN2374-04 (NSTIP)
Numerical and Experimental Study of Aluminum-Ceramic Metal Matrix Nanocomposites using Spark Plasma Sintering
Sept., 2013/ Aug. 2015
14,02,000 CO-I and leading critical task
13-NAN1700-04 (NSTIP)
Fabrication of boron nitride nanocomposites hard materials for cutting tool and abrasive applications by spark plasma sintering
Sept. 2014/ Aug. 2016
19,72,000 PI, managing overall project work and leading critical
task
13-NAN1702-04 (NSTIP)
Hierarchical Structured Catalysts for Sustainable Production of Chemicals and Eco-friendly Fuels
Sept. 2014/ Aug. 2016
19,61,096 CO-I and leading critical task
15-NAN4709-04 (NSTIP)
Using fluorescent pyrene-functionalized sol-gel silica nanomaterials to
Dec. 2015/ Nov. 2017
9,76,910 CO-I and leading critical task
6
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
construct highly selective, sensitive, and portable opto-chemical mercury sensors
SABIC Development of novel
metallic micro-droplet based composites: Experimental analysis and Computational modelling
Feb. 2015/ Mar. 2016
99,800 CO-I and leading a critical task
Maarifah Nanostructured thermoelectric materials (TEMs) for energy harvesting application prepare via mechanically induced alloying followed by spark plasma sintering (SPS)
Sept. 2017/ Aug. 2019
748,840 PI and leading critical task
Saudi Aramco Development of High-
Temperature Membranes for Hydrogen Separation from Reactive Environment
Jan.2018/ Dec. 2021
40,00,000 CO-I and leading critical task
RESEARCH PROJECTS (2010-2017)
• Development of nitrogen-modified CNTs as Pt-free catalyst for fuel cell applications
• Carbon nanofibers grown on 3-d solid structures for applications in energy-related catalysis
• Development of highly efficient visible-light-driven mesoporous nanostructured materials for
photocatalytic applications
• Development of advanced and functional nanostructured mesoporous zeolites for
hydrodesulphurization and other catalytic applications in petroleum and petrochemicals
• Numerical and experimental study of aluminum-ceramic metal matrix nanocomposites using
spark plasma sintering
• Synthesis of sialons for hard materials and led applications
• Synthesis of thermoelectric materials via SPS and PLD
• Synthesis of aluminosilicate oxynitride leads
• Synthesis of cBN-sialon for hard materials
• Investigation of micro and nano-gap electrode based nanostructured sensor for ultrafast
detection of hydrogen
• Hierarchical structured catalysts for the sustainable production of chemicals and eco-friendly
fuels
• Sintering of nanostructured hard materials by advance sintering techniques
• Sintering of nanostructured aluminium-based alloys advance sintering techniques
• Sintering of nanostructured light metals and composites by advance sintering techniques
• Sintering of nano-alumina ceramics and composites
• Micro/nano-yttrium stabilized zirconia by spark plasma for catalytic applications
• Preparation of micro/nanocomposite alumina plus ash
7
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
• Thermoelectric material inxsn1-xte prepared by spark plasma
TEACHING DURING Ph.D. DEGREE (2003-2007)
Teaching Of Undergraduate During Ph.D. Degree (At Stockholm University)
Graduate Project Supervisor During Ph.D. Degree (At Stockholm University)
Course Projects Like Synthesis Of Single Crystal And Determine Crystal Structure And Charaterisation For Example Magnetic Properties, Review; Presentation On Bulk Metallic Glasses And Eight Credit Course On Oral Presentation
Teaching Fresh Ph.D. Scholars
AFTER PH.D DEGREE (2006-2010)
Teaching Undergraduate And Graduate Courses (Including: Ceramics And Glasses, X-Ray Diffraction And Crystallography, Strength Of Materials, Powder Metallurgy, Materials Science (Basic), Alloy Production, Heat Treatment & Processes, Thermodynamics Of Materials, Materials Characterization Techniques And Casting Tech. & Foundry Technology, Etc.)
Supervisor Of Undergraduate Senior Project Design (Final Year Project) I) Synthesis Of Bulk Metallic Glasses Ii) Synthesis And Comparative Study Of Hap/Stainless Steel Functional Graded Materials Used In Biomedical Implants
Advisor Of Undergraduate Students For Three Years
Internship Coordinator
Been Internal Examiner Of Master Degree/Ph.D. Candidates (Shape Memory Alloys, Glass Coating, Role Of Cnt Addition &Processing Parameters On Alumina Based Composite, Etc.)
External Examiner (For Final Year Project At Punjab University)
Internal Examiner (Master and Ph.D. Thesis at Gik. Institute)
PROJECTS SUPERVISOR GRADUATE LEVEL (2006-2017)
Study And Synthesis Of Piezoelectric Materials (Bitio3)
Production Of Aluminum Metal Foams
Enhancing Bond Strength In Bioactive Ha Coatings Of Ti-Ni, Ti-Nb Alloys By Varying Particle Size + Shape Of Ha
Synthesis And Properties Study Of Copper, Cuprous Oxide Cnt Reinforced Nano-Composites
Preparation Of Bulk Metallic Glasses And Study Of Their Structure And Properties
Increasing The Efficiency Of Back Contact Layer (ZnTe) Of CdTe Solar Cell
Light Metal Alloy. Magnesium Alloys
Nickel-Ceramic (Fiber / Whole Sic + BN) Composite Coatings In Engine Application
Fabrication Of Composites And Process Of Spark Plasma Sintering
Synthesis Of Aluminosilicate Oxynitride Drilling Bits Prepare By Spark Plasma Sintering
Synthesis Of cBN-Sialon For Hard Materials Sintered By Spark Plasma Sintering
3.1.2. Projects Proposals under Preparation
Project Title
Funding
Organization
Duration Role Status
Development of alumina silicate oxynitride for
LEDs application
NSTIP 24
Months PI
In preparation
Maarifah 24
Months PI Submitted
8
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
Nanostructured thermoelectric materials (TEMs) for energy harvesting application prepare via mechanically induced alloying followed by spark plasma sintering (SPS)
3.2. Research Facility Development
Enhanced the capability of research laboratory and equipped with most important of the required
equipments and Chemicals from my project funding.
1. Probe Ultra-sonicator 2. TriboLab Universal Mechanical Testing 3. Dilatometer for thermal expansion 4. Thermal conductivity Rotatory evaporator 5. High energy ball mill 6. DSC/TGA 7. TMA 8. DMA etc.
Experience In Analytical & Other Techniques: Transmission Electron Microscope, Field
Emission Scanning Electron Microscope, Focus Ion Beam, Gas Injection System, X-Ray
Diffractometer, Single Crystal Diffractometer, Particle Size Analyzer, Photo-Luminesce, Light
Microscope, Physical Laser Deposition, Mechanical Testing, Thermal Analysis (DMA, TMA
DSC, DTA. TGA, Thermal Conductivity & Coefficient of Expansion, Wear Testing Etc.) Infrared
Spectroscopy, Raman Spectroscopy, Spark Plasma, Hot Press, Hot Isostatic Press,
Microwave Sintering, High Temperature Graphite Furnace, Induction, Arc, Radio Frequency
Furnaces and Metal Evaporator, Radiofrequency, Sputtering Etc.
3.3. Thesis Supervision at KFUPM
Student Name Department Level Role Status
Raja Muhammad Awais Khan
Mechanical Eng. Dept.
MS Co-Advisor
Completed
Co-Advisor
Moath Mohammed Al Malki
Mechanical Eng. Dept.
MS Co-Advisor
Completed
Co-Advisor
Mohamed Abdelmageed Mohamedzein
Mechanical Eng. Dept.
MS Co-Advisor
Completed
Hafiz Khurram Mechanical Eng. Dept.
MS Co-Advisor
Completed
Saleh Al Wohaibi Mechanical Eng. Dept.
MS Co-Advisor
Completed
Bilal Anjum Ahmad Mechanical Eng. Dept.
PhD. Co-Advisor Completed
9
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
4.1. Committee Work
Final year project (FYP) for BSc (Eng.): External Examiner and Internal Examiner at Punjab University, GIKI (Pakistan) continue for four years and over 100 students FYP were evaluated and oral exam were conducted.
For two years I was in-charge and conduct entry test at Islamabad (Pakistan) for GIKI where over 1500 candidates appeared
Involved in R&D work related to nanomaterials and consultancy projects related to quality evaluation, and processing, properties and characterization of engineering materials and their application for wind energy and power plants. I was involved in the quality assurance and accreditation of engineering programs and Outcome Based Assessment (OBA) at Pakistan Engineering Council forum to complement with the Washington Accord, from 2007 till 2010
4.2. External and Internal Examiner: MS and PhD Thesis Evaluation Committee at GIKI, Pakistan
Since 2007 to 2010, I was co-advise and/or external examiner for MS and PhD Thesis
4.3. Seminar and Workshop Attended
No.
Workshop Title
Place
Date
1 2 3 4
Workshop on High Resolution TEM Workshop on FESEM Workshop on FIB/FESEM Workshop on EBSD/EDXS
Khobar, Saudi Arabia Khobar, Saudi Arabia Brno, Czech Republic London, England
2013 2014 2014 2014
5
Chemical Safety and Security Workshop
KFUPM, Saudi Arabia
2015
6
Negotiation Skills for Managers
Khobar, , Saudi Arabia
2015
Beside above many other workshops and seminars attended from 1999.
4.4. Reviewed the Following Scientific Manuscripts for Journals
Worked as a reviewer for several reputed International journals from Elsevier, PJEAS, Optics and Laser Technology, AJSE. etc. Details given in (Appendix-3)
Section- 4: Professional and Community Service
10
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
4.5. Professional Affiliation
Pakistan Engineering Council, Professional Engineer
American Society of Materials, Member
Materials Research Society, Member
Appendix 1
Table- 2.3. A
Publication
Refereed Journal Publication
S. No.
Publication Details
Journal Name, Type
and Impact factor
Role and
Contribution
Research Scientist - II & III
J1 HM Irshad, AS Hakeem, BA Ahmed, S Ali, S Ali, S Ali, MA Ehsan, T Laoui Effect of Ni content and Al2O3 particle size on the thermal and mechanical properties of Al2O3/Ni composites prepared by spark plasma sintering
International Journal of Refractory Metals and Hard Materials
ISI, 2.5
Critical Analyses, Review, Editing and Quality Enhancement
J2 MA Ehsan, MA Aziz, A Rehman, AS Hakeem, MAA Qasem, SHA Ahmad Aerosol-Assisted Chemical Vapor Deposition of Silver Thin Film Electrodes for Electrochemical Detection of 2-Nitrophenol
Journal of The Electrochemical Society ISI, 3.2
Critical Analyses, Review, Editing and Quality Enhancement
J3 Rabia Naeem, Muhammad A Ehsan, Vickie McKee, Abbas S Hakeem, Muhammad Mazhar Photoelectrochemical investigations of CaTiO3-TiO2 composite electrodes developed from aerosol assisted chemical vapor deposition
Materials Science and Engineering B, ISI, 2. 5
Critical Analyses, Review, Editing and Quality Enhancement
J4 Kabeer Raza,Muhammad Usama Siddiqui, Abul Fazal M. Arif, Syed Sohail Akhtar, Abbas Saeed Hakeem Design and Development of Thermally Conductive Hybrid Nano-Composites in Polysulfone Matrix
Polymer Composites, ISI, 2.5
Critical Analyses, Review, Editing and Quality Enhancement
J5 Md. Abdul Aziz,* Demetrios Theleritis, Mohammod Oudah Al-Shehri, Muhammad Ibrar Ahmed, Muhammad Qamaruddin, Abbas Saeed Hakeem, Aasif Helal, and Mohammed Ameen Ahmed Qasem
Chemistry Select, ISI, 1.5
Critical Analyses, Review, Editing and Quality Enhancement
11
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
A simple and direct preparation of a substrate-free interconnected nanostructured carbon electrode from date palm leaflets for detecting hydroquinone
J6 Bilal Anjum Ahmed, Nabi B, Raja Muhammad Awais Khan, , Moath Al Malki, Fazal Ahmad Khalid, Tahar Laoui, Abbas Saeed Hakeem* Spark Plasma Sintering of Nano Sized Ca-α-Sialon Matrix Reinforced by cBN
International Ceramics, ISI, 2.76
Critical Parts, Critical Analyses, Review, Editing and Quality Enhancement
J7 Raja Muhammad Awais Khan, Moath Mohammad Al Malki, Abbas Saeed Hakeem*, Tahar Laoui Synthesis of hard and tough SiC/α-SiAlON composite ceramics using nano-sized precursors and spark plasma sintering
International Ceramics, ISI, 2.76
Critical Analyses, Review, Editing and Quality Enhancement
J8 R Naeem, MA Ehsan, A Rehman, ZH Yamani, AS Hakeem, M Mazhar Single step aerosol assisted chemical vapor deposition of p–n Sn (ii) oxide–Ti (iv) oxide nanocomposite thin film electrodes for investigation of photoelectrochemical
New Journal of Chemistry, ISI, 3.3
Critical Analyses, Review, Editing and Quality Enhancement
J9 MA Ahmed Qasem, M Aziz, AS Hakeem, SA Onaizi Preparation of Nano-Co3O4 by Direct Thermal Decomposition of Cobalt (II) Nitrate Hexahydrate for Electrochemical Water Oxidation
Current Nanoscience ISI, 1.1
Critical Analyses, Review, Editing and Quality Enhancement
J10 Umer Mehmood, Mohammad Afzaal, Amir Al-Ahmed, Heather M. Yates and Abbas S. Hakeem Fluorine Doped Tin Oxide Surfaces vs. Power Conversion Efficiencies in Dye-Sensitised Solar Cells: A Move Towards 12% Efficient Solar Cells
Photovoltaics research and applications, ISI, 7.58
Critical Analyses, Review, Editing and Quality Enhancement
J11 BA Ahmed, AS Hakeem, T Laoui, M Al Malki, MA Ehsan, S Ali Low-temperature spark plasma sintering of calcium stabilized alpha sialon using nano-size aluminum nitride precursor, 2017
International Journal of Refractory Metals and Hard Materials ISI, 2.5
Critical Analyses, Review, Editing and Quality Enhancement
J12 U Mehmood, A Al-Ahmed, M Afzaal, AS Hakeem, SA Haladu Enhancement of the Photovoltaic Performance of a Dye-Sensitized Solar Cell by Cosensitizing, 2017
IEEE Journal of Photovoltaics ISI, 3.2
Critical Analyses, Review, Editing and Quality Enhancement
J13 BA Ahmed, AS Hakeem, T Laoui, RMA Khan, MM Al Malki, A Ul-Hamid Effect of precursor size on the structure and mechanical properties of calcium-stabilized sialon/cubic boron nitride nanocomposites, 2017
Journal of Alloys and Compounds ISI, 3.3
Critical Analyses, Review, Editing and Quality Enhancement
12
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
J14 MA Aziz, A El-Madkhoum, AS Hakeem, MN Shaikh, AU Rehman Effect of Mn precursors on the morphology and electrocatalytic activity toward water oxidation of micro-nanostructured MnO x films prepared by voltammetric depositi., 2017
Journal of Materials Science: Materials in Electronics ISI, 2.4
Critical Analyses, Review, Editing and Quality Enhancement
J15 T Kurniawan, O Muraza, AS Hakeem, IA Bakare, T Nishitoba, T Yokoi Selective Isomerization of n-Butane over Mordenite Nanoparticles Fabricated by a Sequential Ball Milling–Recrystallization–Dealumination Route, 2017
Energy & Fuels ISI, 3.1
Critical Analyses, Review, Editing and Quality Enhancement
J16 Geioushy, R.A., Khaled, M.M., Hakeem, A.S., Alhooshani, K. Graphene/ZnO/Cu2O electrocatalyst for selective conversion of CO2 into n-propanol, 2017
Electrochimica Acta ISI, 4.80
Critical Analyses, Review, Editing and Quality Enhancement
J17 Hafiz Muzammil Irshad, Bilal Anjum Ahmed, Muhammad Ali Ehsan, Tahir Irfan Khan, Tahar Laoui, Muhammad Rizwan Yousaf, Ahmed Ibrahim, Abbas Saeed Hakeem
Investigation of the structural and mechanical properties of micro-/nano-sized Al2O3 and cBN composites prepared by spark plasma sintering, 2017
Ceramics International ISI, 2.76
Critical Analyses, Review, Editing and Quality Enhancement
J18 Teguh K, Oki M, Abbas S. Hakeem, Adnan
M. Al-Amer Mechanochemical route and recrystallization strategy to fabricate MOR nanoparticles from natural zeolites, 2017
Crystal Growth & Design ISI, 4.43
Critical Analyses, Review, Editing and Quality Enhancement
J19 Teguh K, Oki M, Koji M, Abbas S. Hakeem, Yuichiro H, Adnan M. Al-Amer, Norikazu N. Conversion of dimethyl ether to olefins over nanosized mordenite fabricated by a combined high-energy ball milling with recrystallization, 2017
Industrial Engineering Chemistry Research ISI, 2.59
Critical Analyses, Review, Editing and Quality Enhancement
J20 Al Malki, M.M., Khan, R.M.A., Hakeem, A.S., Hampshire, S., Laoui, T. Effect of Al metal precursor on the phase formation and mechanical properties of fine-grained SiAlON ceramics prepared by spark plasma sintering, 2017
Journal of the European Ceramic Society ISI, 2.93
Writing Critical Parts, Critical Analyses, Review, Editing and Quality Enhancement
J21 Akhtar, S.S., Kareem, L.T., Arif, A.F.M., Siddiqui, M.U., Hakeem, A.S. Development of a ceramic-based composite for direct bonded copper substrate, 2017
Ceramics International ISI, 2.76
Critical Analyses, Review, Editing and Quality Enhancement
J22 Said, S.M., Bashir, M.B.A., Sabri, M.F.M., Hakeem A. S., Ghazali, N.N.N., Elsheikh, M.H
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Critical Analyses, Review, Editing and Quality Enhancement
13
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
Enhancement of Thermoelectric Behavior of La0.5Co4Sb12−xTex Skutterudite Materials, 2017
ISI, 1.75
J23 Akhtar, S.S., Siddiqui, M.U., Kabeer, R., Hakeem, A.S., Kareem, L., Arif, A.F. A computational and experimental study on the effective properties of Al2O3-Ni composites, 2017
International Journal of Applied Ceramic Technology ISI, 1.53
Critical Analyses, Review, Editing and Quality Enhancement
J24 Ehsan, M.A., Naeem, R., McKee, V., Hakeem, A.S., Mazhar, M. MgTi2O5 thin films from single molecular precursor for photoelectrochemical water splitting, 2017
Solar Energy Materials and Solar Cells ISI, 4.73
Critical Analyses, Review, Editing and Quality Enhancement
J25 Mehmood, U., Afzaal, M., Al-Ahmed, A. S. Hakeem,Ali, H., Al-Sulaiman, F.A Transparent Conductive Oxide Films for High-Performance Dye-Sensitized Solar Cells, 2017
IEEE Journal of Photovoltaics ISI, 3.74
Critical Analyses, Review, Editing and Quality Enhancement
J26 Geioushy, R.A., Khaled, M.M., Hakeem, A.S., Alhooshani, K., Basheer, C. High efficiency graphene/Cu2O electrode for the electrochemical reduction of carbon dioxide to ethanol, 2017
Journal of Electroanalytical Chemistry ISI, 2.73
Writing Critical Parts, Critical Analyses, Review, Editing and Quality Enhancement
J26 Khan, R.M.A., Al Malki, M.M., Hakeem, A.S., Ehsan, M.A., Laoui, T. Development of a single-phase Ca-α-SiAlON ceramic from nanosized precursors using spark plasma sintering, 2016
Materials Science and Engineering A ISI, 2.65
Writing Critical Parts, Critical Analyses, Review, Editing and Quality Enhancement
J27 IA Bakare, O Muraza, SA Ganiyu, AS Hakeem, ZH Yamani, AMJ Al-Amer
Synthesis of zeolite–magadiite composites: Effects of co-solvent and aluminum source; 2016
Particuology ISI, 2.11
Critical Analyses, Review, Editing and Quality Enhancement
J28 Muhammad Ali Ehsan, Rabia Naeem, Hamid Khaledi,c Manzar Sohail, Abbas Saeed Hakeem, Muhammad Mazhar
Fabrication of CoTiO3-TiO2 composite Films from Heterobimetallic Single Source Precursor for Electrochemical Sensing of Dopamine; 2016
Dalton Transactions ISI, 4.19
Review, Editing and Quality Enhancement
J29 Muhammad Ali Ehsan, Rabia Naeem, Vickie McKee, Abbas Hakeem Saeed,
Alagarsamy Pandikumar, Nay Ming Huang and Muhammad Mazhar Electrochemical sensing of nitrite using a copper–titanium oxide composite derived from a hexanuclear complex, 2016
RSC Advances, ISI, 3.84
Review, Editing and Quality Enhancement
J30 FO Bakare, W Mahfoz, MA Aziz, MN Shaikh, AS Hakeem, M Oyama Preparation and electrochemical properties of a gallium-doped zinc oxide electrode
Journal of The Electrochemical Society, ISI, 3.26
Critical Analyses, Review, Editing and Quality Enhancement
14
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
decorated with densely gathered palladium nanoparticles 2016
J31 A Qurashi, JA Rather, T Yamazaki, M Sohail, K De Wael, B Merzougui, A S Hakeem Swift electrochemical detection of paraben an endocrine disruptor by In2O3 nanobricks 2015
Sensors and Actuators B: Chemical, ISI, 3.66
Critical Parts, Critical Analyses, Review, Editing and Quality Enhancement
J32 A Hachimi, B Merzougui, A Hakeem, T Laoui, GM Swain, Q Chang Synthesis of Nitrogen-Doped Carbon Nanotubes Using Injection-Vertical Chemical Vapor Deposition: Effects of Synthesis Parameters on the Nitrogen Content 2015
Journal of Nanomaterials, ISI, 1.65
Writing Critical Parts, Critical Analyses, Review, Editing and Quality Enhancement
J33 N Saheb, M Shahzeb Khan, AS Hakeem
Effect of Processing on Mechanically Alloyed and Spark Plasma Sintered Al-Al2O3 Nanocomposites 2015
Journal of Nanomaterials, ISI, 1.65
Critical Parts, Critical Analyses, Review, Editing and Quality Enhancement
J34 M Huang, Muhammad Ali Ehsan, Abbas Saeed Hakeem, Hamid Khaledi
Fabrication of CuO-1.5ZrO2 composite thin film, from heteronuclear molecular complex and its electrocatalytic activity towards methanol oxidation 2015
Rsc Advances, ISI, 3.84
Review, Editing and Quality Enhancement
J35 MN Shaikh, M Bououdina, AA Jimoh, MA Aziz, A Helal, AS Hakeem, Zain H Yamani, Tae-Jeong Kim The rhodium complex of bis (diphenylphosphinomethyl) dopamine-coated magnetic nanoparticles as an efficient and reusable catalyst for hydroformylation of olefins 2015
New Journal of Chemistry, ISI, 3.08
Critical Analyses, Review, Editing and Quality Enhancement
J36 SA Ganiyu, O Muraza, AS Hakeem, K Alhooshani, MA Atieh Carbon nanostructures grown on 3D silicon carbide foams: Role of intermediate silica layer and metal growth 2014
Chemical Engineering Journal, ISI, 2.03
Writing Critical Parts, Critical Analyses, Review, Editing and Quality Enhancement
J37 A Hafeezullah, ZH Yamani, J Iqbal, A Qurashi, A Hakeem
Rapid sonochemical synthesis of In2O3 nanoparticles their doping optical, electrical and hydrogen gas sensing properties 2014
Journal of Alloys and Compounds, ISI, 3.06
Critical Analyses, Review,
J38 Development and processing of SiAlON nano-ceramics by Spark Plasma Sintering AS Hakeem, RMA Khan, MM Al-Malki, F Patel, AI Bakare, S Ali 2014
Advances in Science and Technology
Main Author, Concept, Work Planning, Partial Writing, Model
15
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
Development and Data Analyses, Presentation of Results
J39 M Qamar, B Merzougui, D Anjum, AS Hakeem, ZH Yamani
Synthesis and photocatalytic activity of mesoporous nanocrystalline Fe-doped titanium dioxide 2014
Catalysis Today, ISI, 3.89
Critical Analyses, Review, Editing and Quality Enhancement
J40 N Bakhsh, FA Khalid, AS Hakeem, T Laoui Dispersion of Carbon Nanotubes in Alumina using a Novel Mixing Technique and Spark Plasma Sintering of the Nanocomposites with Improved Fracture Toughness. 2014
Advances in Science & Technology
Partial Writing, Model Development and Data Analyses, Presentation of Results
J41 N Bakhsh, FA Khalid, AS Hakeem Effect of sintering temperature on densification and mechanical properties of pressureless sintered CNT-alumina nanocomposites 2013
Materials Science and Engineering
Critical Analyses, Review, Editing and Quality Enhancement
J42 AS Hakeem, S Ali, B Jonson Preparation and properties of mixed La–Pr silicate oxynitride glasses 2013
Journal of Non-Crystalline Solids, ISI, 1.76
Main Author, Concept, Work Planning, Partial Writing, Model Development and Data Analyses, Presentation of Results
J43 N Al-Aqeeli, K Abdullahi, AS Hakeem, C
Suryanarayana, T Laoui Synthesis, characterisation and mechanical properties of SiC reinforced Al based nanocomposites processed by MA and SPS 2013
Powder Metallurgy, ISI, 0.77
Co-author, Parts, Critical Analyses, Review
J44 AM Al-Qutub, A Khalil, N Saheb, AS Hakeem
Wear and friction behavior of Al6061 alloy reinforced with carbon nanotubes 2013
Wear, ISI, 1,91 Critical Analyses, Review
J45 N Saheb, AS Hakeem, A Khalil, N Al-Aqeeli,
T Laoui Synthesis and spark plasma sintering of Al-Mg-Zr alloys 2013
Journal of Central South University, ISI, 0.52
Critical Analyses, Review
J46 N Saheb, A Khalil, AS Hakeem, T Laoui, N Al-Aqeeli, AM Al-Qutub Age Hardening Behavior of Carbon Nanotube Reinforced Aluminum Nanocomposites 2012
Journal of Nano Research, ISI, 0.56
Critical Analyses, Review
J47 OB Sohail, PA Sreekumar, SK De, MJ Khan, A Hakeem, AA Alshaiban
Journal of Nanomaterials, ISI, 1.65
Critical Analyses, Review
16
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
Thermal effect of ceramic nanofiller aluminium nitride on polyethylene properties 2012
J48 N Saheb, Z Iqbal, A Khalil, AS Hakeem, N Al
Aqeeli, T Laoui, A Al-Qutub Spark plasma sintering of metals and metal matrix nanocomposites: a review 2012
Journal of Nanomaterials, ISI, 1.65
Critical Analyses, Review
J49 A Khalil, AS Hakeem, N Saheb Optimization of process parameters in spark plasma sintering Al6061 and Al2124 aluminum alloys 2011
Advanced Materials Research
Critical Analyses, Review
J50 T Laoui, AS Hakeem, K Abdullahi, N Saheb, N Al Aqeeli Spark Plasma Sintering of mixed and milled WC-Co micro-/nano-powders 2011
Advanced Materials Research
Critical Analyses, Review
J51 T Laoui, AS Hakeem, K Abdullahi, N Saheb, N Al-Aqeeli Effect of Consolidation Mechanism on the Properties of Nanostructured WC-6, 9, 12 wt% Co Hardmetals 2011
Nano and Micro Materials, Devices and Systems; Microsystems Integration. ASME
Writing, Critical Analyses, Review
J52 E Leonova, AS Hakeem, K Jansson, B Stevensson, Z Shen, J Grins Nitrogen-rich La–Si–Al–O–N oxynitride glass structures probed by solid state NMR 2008
Journal of Non-Crystalline Solids, ISI, 2.6
Co-author, Parts, Critical Analyses, Review
During PhD
J53 AS Hakeem, J Grins, S Esmaeilzadeh
La-Si-ON glasses: Part II: Vickers hardness and refractive index 2007
Journal of the European Ceramic Society, ISI, 3.3
Main Author, Concept, Work Planning, Partial Writing, Model Development and Data Analyses, Presentation of Results
J54
AS Hakeem, J Grins, S Esmaeilzadeh La–Si–O–N glasses: Part I. Extension of the glass forming region 2007
Journal of the European Ceramic Society, ISI, 3.3
Main Author, Concept, Work Planning, Partial Writing, Model Development and Data Analyses, Presentation of Results
J55 AS Hakeem, R Daucé, E Leonova, M Edén,
Z Shen, J Grins Silicate glasses with unprecedented high nitrogen and electropositive metal contents obtained by using metals as precursors 2005
Advanced Materials, ISI, 18.96
Main Author, Concept, Work Planning, Partial Writing, Model Development and Data Analyses, Presentation of
17
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
Results https://www.researchgate.net/profile/Abbas_Hakeem
https://scholar.google.com/citations?hl=en&user=qchbN2cAAAAJ&view_op=list_works&sortby=pubdate&cstart=20&p
agesize=20
https://www.scopus.com/authid/detail.uri?authorId=8868835300
Table-2.3. B
Papers under Review for Publication in Refereed ISI Journals
S.
No.
Paper Details
Journal/Type/Impact
factor
Role and
Contribution
URJ1 Taha Waqar, Syed Sohail Akhtar, Abul Fazal M. Arif, Abbas Saeed Hakeem Design and Development of ceramic-based composites with tailored properties for cutting tool inserts
Under minor revision; International Ceramics, ISI, 2.76
Review, Editing and Quality Enhancement
URJ2 Saleh Wohaibi, Tahar Laoui, M. Abdul Samad, Abbas Saeed Hakeem, Akeem Yusuf Adesina, Faheemuddin Patel Tribological Characterization of Micron-/Nano-sized WC - 9%Co Cemented Carbides Prepared by Spark Plasma Sintering at Elevated Temperatures
Powder Technology, ISI, 2.6
Review, Editing and Quality Enhancement
URJ3 Bilal Anjum Ahmed, Abbas Saeed Hakeem, Tahar Laoui Development of calcium stabilized nitrogen rich alpha sialon ceramics along the Si3N4-1/2Ca3N2:3AlN line using spark plasma sintering
Journal of the European Ceramic Society, ISI, 3.3
Review, Editing and Quality Enhancement
URJ4 Teguh Kurniawan Kurniawan, Oki Muraza, Abbas S Hakeem, Idris A Bakare, Muhammad Qamaruddin, Adnan M Al-Amer, High-energy ball milling attritor and hydrothermal recrystallization to prepare mordenite nanoparticles: the effects of the relative weights of the balls and water
Powder Technology, ISI, 2.6
Review, Editing and Quality Enhancement
URJ5 Moath Mohammad Al Malki, Abbas Saeed Hakeem*, Raja Muhammad Awais, Muhammad Ali Ehsan, Tahar Laoui The Effects Of The Nano Precursors On The Phase Formation And The Shrinkage Behavior Of Ca-Α-Sialon Ceramics, Synthesized By Spark Plasma Sintering
Under minor revision; International Ceramics, ISI, 2.76
Review, Editing and Quality Enhancement
URJ6 Tribological behaviour and performance of alumina-based nanocomposites reinforced with uncoated and Ni-coated cubic boron nitride for tool applications
Wear, ISI, 2.5
Review, Editing and Quality Enhancement
18
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
Table: 2.3. C
International Conferences Details
S.
No.
Conference Details
Paper details
During Research Scientist-II-III
C1 Materials Challenges in Alternative and Renewable Energy, Clearwater, FL, USA, 2016
Metal Oxide Thin Films from Single Source Precursor for Technological Applications, M. A. Ehsan, A. Hakeem, T. Laoui, Z. Abdallah Yamani
C2 International Conference and Exhibition on Materials Chemistry, Valencia, Spain, 2016
Sialon Nano-Composites Matrix Reinforced by Cubic Boron Nitride prepared by using Spark Plasma Sintering Abbas Saeed Hakeem, Bilal Anjum Ahmed,
Akolade Idris Bakare, Ibrahim Ahmed Ali & Tahar Laoui
C3 2nd World Congress and Expo on Nanotechnology and Material Science, April 04-06, Dubai, UAE, 2016
Cubic Boron Nitride Reinforced Sialon Nano-Composites by Spark Plasma Sintering Abbas Saeed Hakeem, Bilal Anjum Ahmed,
Akolade Idris Bakare, Ibrahim Ahmed Ali, Muhammad Ehsan Ali & Tahar Laoui
C4 11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications, 2015
Effect of Al metal precursor on the mechanical properties of SiAlON nano-ceramic, prepared by spark plasma sintering Moath Mohammad Al Malki, Raja Muhammad Awais Khan , Abbas Saeed Hakeem, Stuart Hampshire, Tahar Laoui
C5 11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications, 2015
Processing of Cubic Boron Nitride reinforced SiAlON Nano-Composites by Spark Plasma Sintering Abbas Saeed Hakeem, Raja Muhammad Awais Khan, Moath Mohammed Al Malki, Akolade Idris Bakare, Sadaqat Ali, Tahar Laoui
C6 International Conference on Nano- Electronic Technology Devices and Materials, 2015
Synthesis of MnSil.75-xSex (x=0 and 0.025) by Mechanical Alloying and Spark Plasma Sintering M.B.A. Bashir, M.F.M. Sabri, S.M. Said, D.A. Shnawah, A.S. Hakeem, A.l. Bakare and M.H.
Elsheikh
C7 13th International Conference on Modern Materials and Technologies, Tuscany, Italy, 2014
Mechanical characterization of pressureless sintered CNTs-reinforced alumina nanocomposites N. Bakhsh, F.A. Khalid, A. S. Hakeem
C8 13th International Conference on Modern Materials and Technologies, Tuscany, Italy, 2014
Development and processing of SiAlON nano-ceramics by Spark Plasma Sintering Abbas Saeed Hakeem, Tahar Laoui
C9 European Materials Research Society, EMRS, Strasbourg, France, 2013
Activity and Durability of Fe-N-Multiwalled Carbon Nanotubes as Nanocomposite Catalyst for ORR in Acidic and Alkaline Mediums,
19
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
A Hachimi, B Merzougui, A Hakeem,
C10 13th International Symposium on Advanced Materials, (ISAM), Pakistan, 2013
Densification and characterization of pressureless sintered CNTs-reinforced alumina nanocomposites N. Bakhsh,, F.A. Khalid, A. S. Hakeem
C11 Applied Sciences and Technology (IBCAST), 10th International Bhurban Conference, Pakistan, 2013
Comparison of Properties of CNTs Reinforced Alumina Nanocomposites Produced by Conventional and Spark Plasma Sintering N. Bakhsh, F. Ahmad Khalid, A. S. Hakeem
C12 ECCM15th European Conference On Composite Materials, Venice, Italy, 24-28 June 2012
Carbon nanotube reinforced Al 6061 and Al 2124 nanocomposites, N. Saheb, A. Khalil, A. S. Hakeem, N. Al-Aqeeli, T. Laoui
C13
2nd Saudi International Nanotechnology Conference2SINC, KSA, 2012
, A Pt-free catalyst based on metal-nitride-carbide nanocomposites for oxygen reduction reaction (ORR) Abdouelilah Hachimi, Belabbes Merzougui, Abbas Hakeem, Akinpelu Akeem, Bukola Saheed
C14
International Design Engineering Technical, ASME, USA, 2011
Effect Of Consolidation Mechanism On The Properties Of Nanostructured Wc-6, 9, 12 Wt%Co Hardmetals, Tahar Laoui, Abbas Saeed Hakeem, Kachalla Abdullahi , Nouari Saheb And Nasser Al-Aqeeli,
During PhD & before
C15 10th International Conference and Exhibition of the European Ceramic Society, Berlin, Germany, 2007
Nitrogen rich silicate glasses: synthesis, structure, and physical properties A. S. Hakeem, A. Sharafat, E. Leonova, A. Pouya, J. Grins, M. Edén, Z. Shen and S. Esmaeilzadeh
C16 Eighth ESG Conference with the Annual Meetings of the ICG and SGT, Sunderland, UK, 2006
Glass formation and crystallization in Ca-Si-O-N system Ali Sharafat, Abbas S. Hakeem, Jekabs Grins, Saeid Esmaeilzadeh
C17 47th Rocky mountain, Conf. on Analytical Chemistry, DENVER, Colorado, USA, 2005
Solid State NMR Study of Oxynitride Glasses of the Ca-Si-O-N, E. Leonova, A. S. Hakeem, R. Dauché, A. Kaikkonen, Z. Shen, J. Grins, S. Esmaeilzadeh, M. Edén
C18 15th International Congress on electron Microscopy, Durban South Africa, 2003
On the retention of austenite in lath martensite in steels In A. S. Hakeem, D.V. Edmonds, C. Hammond
Appendix 3
List of selected reviewed manuscript:
S. No.
Publication Title
Few Selected Journal Name
20
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
Year of
Reviewed
R1 Influence of an
aqueous/ethanolic solution on
the structural and electrical
properties of
polycrystalline ZnS films
AJSE
2012
R2 Evaluating the factors affecting
corrosive and abrasive wear of
grinding media in wet
grinding of copper sulfide
minerals
AJSE
2012
R3 Investigation of alkali cation
effects on elastic properties and
structure of 7056 glass
AJSE
2012
R4 Effects of Pb and Tl on
microstructures Properties of the
Al-40 %Zn alloy
AJSE
2013
R5 Investigation of surface
roughness and tool life in turning
of AISI D6 cold work tool
Steel
AJSE
2013
R6 Development of response -
dilution maps for the super
duplex stainless steel cladding
deposited by FCAW
AJSE
2013
R7 Optimization of the
Manufacturing Parameters of
Honeycomb Composite
Sandwich Structures to Achieve
Maximum Mechanical Strength
for Aerospace Application
ICASE
2013
R8 Failure Analysis of a
Compressed natural Gas Storage
Cylinder
PJEAS
2013
R9 Dielectric behavior of fabricated
Zinc Chromate Spinel ZnCr2O4
PJEAS 2013
R10 A Study on Drilling of AISI
304L Stainless Steel with
Nanocomposite Coated Drill
Tools
AJSE
2014
R11 A Survey of Low-Power
Integrated Circuit Design
JEAS 2015
R12 Thermal analysis and thermal
stability of Sb-V2O5-TeO2
semiconducting oxide glasses
Measurement (MEAS)
2015
R13 Interface diffusion reaction and
mechanical characterization of
316L stainless steel -
hydroxyapatite functionally
graded materials for joint
prostheses
Ceramics International
2015
21
Dossier of Dr. Abbas S Hakeem - Resume – Highlights
R14 Indentation and deformation
behavior of FeCo-based bulk
metallic glass alloys
Materials Science &
Engineering A
2015
R15 Simultaneous improvement in
the strength and corrosion
resistance of Al via high-energy
ball milling and Cr alloying
Materials and Design
2015
R16 Corrosion inhibition of SAE
1018 carbon steel in H2S and
HCl solutions by lemon verbena
leaves extract
Measurement
2016
R17 Growth and characterization of
butyl 4-hydroxybenzoate single
crystal by vertical Bridgman
technique for third order
nonlinear optical applications
Optics and Laser
Technology
2016
R18 Hybrid Power Analysis
Approach for Electronic System
Design
JEAS
2016
R19
Effect of La inoculation on
composition, content, granularity
and
mechanical properties of in-situ
Al-30wt%Mg2Si Composite
Materials Science &
Engineering A
2017
R20 Fabrication of a high strength
ultra-fine grained Al-Mg-SiC
nanocomposite by multi-step
friction-stir processing
Materials Science &
Engineering A
2017
R21 Esterification process catalyzed
by ZSM-5 Zeolite synthesized
via modified hydrothermal
method
Biomass and Bioenergy
2017
R22 Development of
Inorganic/Organic
Nanocomposite Thin Film for
Room Temperature LPG Sensor
Measurement 2017
R23 A comparative study on
machinability of cryo-treated
and peak aged 15Cr-5Ni
precipitation hardenable stainless
steel
Measurement 2017
22
Dossier of Dr. Abbas S Hakeem - Resume – Highlights